1 Bluetooth headset (BTE001) Instruction manual V2.0 Contents Brief intruduction..................................................................................2 1Bluetooth wireless communication technology ..................................................................2 2Bluetooth wireless headset..................................................................................................2 Before using the headset.......................................................................3 1Overview of the headset......................................................................................................3 2Charging the headset...........................................................................................................3 Basic operation .....................................................................................4 1Switching on/off the headset...............................................................................................4 2The LED indicator of the headset .......................................................................................4 3Pairing the headset with Bluetooth mobile phone...............................................................4 4Wearing the headset ............................................................................................................5 5Telephoning with the headset..............................................................................................5 Care and maintenance...........................................................................7 Specification .........................................................................................7 2 Welcome to use this Bluetooth headset,BTE001.Before using it,pleaseread this instruction carefully. Brief instruction 1Bluetooth wireless communication technology Bluetooth is a standard of close range radio-communication technology which was drawn up by Ericsson,IBM,Intel,Nokia,Tohiba.Through Bluetooth technology,the purpose is to achive the highest transmission rate among mobile phone,computer,printer,PDA and other devices.The transmission range is 10 meters,even more,the max.radio-communication range can reach up to 100 meters. 2Bluetooth wireless headset By using BTE001you can enjoy the happiness that is brought by Bluetooth wireless technology.It has the following functions:
Handsfree receiver/end a call/reject coming call Dial last call with headset Voice dial(It needs your mobile phone to support) Adjust volume Switch freely the conversation between mobile phone and headset Mute operation during the conversation to keep the conversation secret with the third party. 3 Before using the headset 1Overview of the headset Chart 1 Chart 2 1) Multifunction button:on/off/Pair/receive coming call/reject coming call/dial last call 2)The LED indicator of the headset 3)Volume down/microphone mute 4)Volume up/conversation switch/microphone mute 5)Ear hook 6)Mini USB port for charging 7)Ear cap 8)Microphone 9)Speaker 2Charging the headset The headset should be used built-in rechargable battery.You must charge the headset fully when you use it for the first time During using it,if you see the red light to flash and hear the indicaton sound(the headset sound 3 tones of DUevery 20 seconds and a tone of DU every 5 seconds)it means the headset is low power,at this time,you have to recharge the headset. 1) Plug charger into standard AC power socket 2) Connect the end of charger with USB charing port of headset When the red light is always bright,it is charging When the red light is off,it is charging fully 3) It will take about 1.5 hours to charge the headset full. 4 Chart 3 Basic operation 1Switching on/off the headset Function Operation Switch on headset Press the multifunction button for 3-5 seconds, and release the button until you see the blue LED is bright Switch off headset Press the multifunction buttonfor 2-3 secends and release the button until you see the blue LED is long bright LED indicator Blue LED is on A Indication sound tone of DIandDU A tone of DI Blue LED is bright and then is off RemarkAfter switching on for 10 minutes, the headset cannot still connect with any devices, the headset will switch off automatically, in order to save power. 2The LED indicator of the headset 1)Plug charging device, the headset will enter into charging status LED indicator Red LED is on Red LED is off Status of headset It is charging Charging finished 2 )Pair with Bluetooth device(mobile phone) LED indicator Status of headset Red LED flashes every second Standy mode(disconnect with Bluetooth Blue LED flashes 2 times every 4 seconds Blue LED flashes continously and quickly device) Standy mode(already connected with Bluetooth device) Conversation mode and Red alternately blue LEDs flash Pairing mode Red LED flashes Low power 3Pair headset with Bluetooth mobile phone When you use BTE001 for the first time,please pair headset with your mbile phone,and make sure your mobile phone has Bluetooth function which can be used.The steps are as follows:
1) Keep headset and your mobile phone within 1 meter. 2) Please make sure your headset is off(All lights is off) 3) Press multifunction button for 7-8 seconds and release the button after you hear the third indicated tone(the first one is a tone of DI,the second one is DU,and the third one is DONG,DONG)or see the red LED and blue LED flash alternately,the headset enters pairing mode. 5 4) Turn on the Bluetooth function of mobile phone,search Bluetooth device,after searching is finished,pleast select BTE001 on the device list. 5) According to indication,enter password or PIN No:1234,and pressYesor Confirm to confirm. 6) It mobile phone reminds you to connect device,select Yes orconfirm to confirm(It depends on mobile phone).After successful connecting,the blue LED of headset will flash 2 times every 4 seconds. Remark:
Pairing mode will last for 2 seconds,If it can not pair with any devices after exceeding 2 mimutes,the headset will switch to standby mode automatically.If need to pair contimuously,pleast switch off headset firstly,and then refer to 1-6 steps to pair again. After successful pairing,Bluetooth headset and mobile phone will remenber each other.Unless pairing information is deleted owing to new pairing,no need to pair next time. In the status of standy and disconnect with any devices,press multifunction of headset,after hearing a tone of DU,headset will connect with last pairing device. The headset will connect with last pairing device after switching on each time.It you need it to pair with other devices,please switch off Bluetooth function of device that currently paired with headset.and then refer to 1-6 steps to pair with new device. 4Wearing headset This headset is suitable for both ears.The ear hook can turn freely,please adjust according to the following charts .After wearing the headset well ,please turn the microphone of headset towards the mouth of user,then you can enjoy the best comfort and conversation. suitable for right ear suitable for left ear Telephoning with headset Function Status of device Steps of Operation Dial last call Adjust volume End a call Receive coming call Reject coming call 6 Mobile phone headset Operation of headset Voice dial Standby mode switch on Press volume down for 2 seconds,and release the key after you hear the indication tone Press multifunction key quickly for 2 times Press volume up/down to adjust volume Short press multifunction key for 1 times Standby mode switch on Conversation Conversation mode mode Conversation Conversation mode mode ringing switch on Short press multifunction key for 1 times ringing switch on Press multifunction 2 seconds,andrelease the key after you hear the indication tone key for Conversation Conversation switch mode switch on Press volume up for 2 seconds,and releasethe key after you hear a tone of DU,the be conversation to mobile phone from transferred headset.Do operation,the conversation will be transferred to headset same will Microphone Conversation Conversation mute mode mode Cancellation Conversation mute mode Conversation mode (mute) Press simultaneously volume up and down for 2 seconds,andrelease the key after you hear a tone of DU,the microphone of headset will be mute.When it is in mute modethe headset will sound a tone of DI every 5 seconds Press simultaneously volume up and down for 2 seconds,and release the key after you hear a tone of DU Remark Some mobile phones dont support parts of function of list.Pleast refer to your instruction manual of mobile phone When volume of headset is adjusted to Max. or Min.You will hear a tone of DING DONG. For parts of mobile phone,when you press the receiving key to receive a call ,the conversation will be transferred to mobile phone firstly.At this time,you can use the function of conversation switch or operate on mobile phone to switch the conversation to headset.Please refer to your instruction of mobile phone for further imformation. 7 Care and maintenance Before using the Bluetooth adaptor, please read the following recommendations ,It will help you to enjoy the product for many year.
Keep dry and dont put it in the wet place, in case of effecting the interior circuit of product.
Dont put the product under the sunlight or place in hot areas. High temperature will shorten the life of electronic device and deform certain plastic.
Dont expose the adaptor to extreme temperatures, which may damage the
Dont try to take apart the product. It may damage the product if you are not
Dont fall off on the floor, or knock the hard substance, it may damage internal circuit board. professional interior circuit.
Dont use intensify chemical or detergent to clean the product
Dont scrap the surface with sharp things
If the product cant work normally, please send it to the regularly asserted store, the staff will help you to solve problem warmly. Compatibility Bluetooth V2.0+EDR Headset, Hands free 10m 5-6 hrs 120hrs DC+5.00.25VA Specification Bluetooth version Bluetooth profiles Effective range Working time of headset Standby time of headset Charging input voltage Charging time of headset About 1.5rs Dimension 55*15*8.5mm 9.5g (include ear hook) Weight 8.5g (not include ear hook) FCC Warning:
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation. Changes or modifications to this unit not expressly approved by the party responsible for compliance will void the users authority to operate the equipment. Any change to the equipment will avoid FCC grant. 8 This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
--Reorient or relocate the receiving antenna.
--Increase the separation between the equipment and receiver.
--Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
--Consult the dealer or an experienced radio/TV technician for help. The equipment compliance with FCC radiation exposure limits set forth for uncontrolled Environment. Manufacturer my avoid users authority to operate this device.