BTH002N Bluetooth stereo headset User guide
Brief introduction..1 1. Bluetooth wireless communication technology....1 2. About BTH002N......1
Before using2 1. Overview...2 2. Charging the headset.............3
How to use...4 1. Switching on/off the headset.....4 2. Pairing the headset with Bluetooth devices..4 How to enter pairing mode....4 Pairing the headset with Bluetooth mobile phone.4 Pairing the headset with Bluetooth transmitter.5 Multi-pair...6 3. Re-connecting to a Bluetooth device....6 4. Wearing the headset.....7 5. Making calls with the headset......7 6. Playing music...8 7. Restoring factory defaults and resetting..9 8. LED indicator...............9 9. Indication tone....10
Care and maintenance...10
FAQs...11
Specifications....12 Welcome to use this Bluetooth stereo headset, BTH002N. Please read this users manual carefully before using it.
Brief introduction 1. Bluetooth wireless communication technology Bluetooth is a standard of close range radio-communication technology that was drawn up by Ericsson, IBM, Intel, Nokia and Toshiba. With Bluetooth technology, we can achieve the highest transmission rate among cell phones, computers, printers, PDAs and other devices. The max transmission range of class II is 10 meters while the max transmission range of class I can reach up to 100 meters. 2. About BTH002N BTH002N is a stereo Bluetooth headset. It supports the following Bluetooth profiles:
HSP Headset Profile HFP Hands-free Profile A2DP Advanced Audio Distribution Profile AVRCPAudio/Video Remote Control Profile You can enjoy music wirelessly by using the BTH002N. Steps as following:
1) Pairing with the Bluetooth mobile phone and PDA which support HFP.
Answer, end and reject call from the headset
Redial last number
Voice dial
Adjust the volume
Switch the conversation between the headset and the mobile phone
Microphone mute 2) Pairing with Bluetooth music devices and Bluetooth transmitter which support A2DP
Enjoy music wirelessly
Adjust the volume
Remote control the function of pause/play
Remote control last/next song 3) Easy to switch between conversation and music, you will not miss the incoming call during listening to music. 1 4) Automatic connecting with the last paired device when turn on the headset. Note: Even though the paired device and headset support the same Bluetooth profiles, the functions may be different due to the specification difference of the paired devices.
Before using 1 Overview 1) Left speaker 2) Right speaker 3) Retractable string 4) < key :last song 5) key: volume down 6) Charging port 7) > key :next song 8) LED Indicator 9) Multifunction button (MFB):Switch on/off the headset, answer, end and reject call, microphone mute, voice dial and voice transfer, redial last number, pause and play
+ key: volume up Built-in microphone 10) 11) 2 2 Charging the headset First time charging Before you use this Bluetooth headset, please charge the battery of BTH002N fully. Next time When you hear three warning tones of DONG every 20 seconds, at the same time, the red light blinks two times. It means the battery is low power and need to be charged. There are two types of charging as below:
A . Charging the battery with travel charger Step1: Plug the travel charger into standard AC power outlet. Step2: Connect the travel charger with the charging port of the headset. When the red light is on, the headset is charging. When the red light is off, the headset is charged fully. It takes about 3 hours to charge the headset fully. B. Charging the battery with USB cable Step1: Insert USB charging cable into USB port of PC. Step2: Connect charging cable with the charging port of headset. When the red light is on, the headset is charging. When the red light is off, the headset is charged fully. It takes about 3 hours to charge the headset fully. Note:Choosing travel charger or USB cable depends on different countries or areas and actual demands. Warning:
1) The battery is recycled. 2) Do not dispose of the battery in fire, as it may cause explosion. 3
How to use 1. Switching on / off headset Function Switch on Switch off Operation Press the MFB button for 3-5 seconds, and release it till the blue LED is on Press the MFB button for 3-5 seconds, and release it till the red LED is on LED indicator Blue LED is on for 1 second Red LED is on for 1 second Indication tone A long DI tone A long DI tone Note: In order to save power, the headset will automatically switch off if no devices can be connected within 5 minutes after switching on. 2 Pairing the headset with Bluetooth devices How to enter pairing mode Function Operation Enter pairing mode Make sure the headset is off. Press and hold MFB button for 7-9 seconds, and release it till the red and blue LEDS blink alternately LED indicator Red and blue LEDs blink alternately. Indication tone Two DU tones Note: The pairing mode will last 2 minutes, If the headset still cant pair with any Bluetooth devices after 2 minutes, it will switch into standby mode automatically. Pairing the headset with Bluetooth mobile phone Please make sure your mobile phone has Bluetooth function that can be used. Specific pairing procedures may vary with different mobile phone. Please refer to your mobile phone manual for further information. Steps as follows:
1) Please keep the headset and mobile phone in the range of 1 meter when 2) Make the headset enter into pairing mode (Please refer to how to enter pairing. into pairing mode). 4 3) Start the Bluetooth function of mobile phone and search the Bluetooth devices. After searched, select BTH002Nin the Bluetooth device list. 4) According to indication, enter password or PIN No:0000,and press the 5) After successful pairing, select BTH002N in the Bluetooth device list, key of Yes or confirmed. and press connect. 6) After successful connecting, the blue LED of the headset quickly blinks twice or three times every 4 seconds. Notes:
If the pairing is not successful, please switch off headset firstly, and then re-pair according to the step 16 mentioned above.
After pairing is successful, paired devices will remember each other. Unless pairing information is deleted because of new pairing, no need to pair when use next time. The headset can remember 8 paired devices, when paired devices exceed 8 paired devices, the first one will be replaced.
If you want to pair the headset with other devices, please pair it with the new device according to steps 16 mentioned above. Pairing the headset with Bluetooth transmitter You can enjoy music wirelessly through connecting headset with stereo Bluetooth transmitter,. Here take BTT001 (single sale) iPod general Bluetooth transmitter for example. Pairing steps as follows:
1) Keep the Bluetooth transmitter and headset in the range of 1 meter when pairing. pairing mode). 2) Make the headset enter into pairing mode (refer to How to enter into 3) Turn on the Bluetooth transmitter. It will search Bluetooth device 4) When the headset requests PIN No, the Bluetooth transmitter need to 5) After successful pairing and connecting, the blue LED of headset quickly automatically and start pairing. respond 0000 automatically. blinks twice every 4 seconds. Notes:
1) The pairing password of BTH002N is 0000, so, the headset cant pair with the Bluetooth transmitter which pairing password is not 0000. 5 2) If the pairing is still not successful after trying several times, please refer to your Bluetooth transmitter manual carefully.. Multi-pair The headset can connect with two devices at most. One is the mobile phone with HFP profile, another is the devices with A2DP profiles. If you want to finish the pairing of several Bluetooth devices, please refer to the following steps:
1) Firstly, pair the headset with Bluetooth transmitter (refer to pairing headset with Bluetooth transmitter). 2) Switch off the Bluetooth transmitter. 3) Pair and connect the headset with the Bluetooth mobile phone (refer to pairing headset with Bluetooth mobile phone). 4) Restart Bluetooth transmitter, it will connect with headset automatically. Notes:
After successful pairing with several Bluetooth devices, the paired devices will remember each other. Unless pairing information is deleted because of new pairing, otherwise make mobile phone and headset set up hands free connection next time, and re-start the Bluetooth transmitter, then the connection of several devices can be performed.
For the mobile phone which supports the HSP and A2DP at the same time. It may set up connection with HSP and A2DP simultaneously. At this time, start Bluetooth transmitter may not connect with the headset again. 3 Re-connecting to a Bluetooth device 1) Automatic connecting Every time the headset is switched on, it will connect to last connected device automatically. 2) Manual connecting to last connected HFP device When the headset is in standby mode and doesnt connect to any HFP devices, short press MFB button twice, it will connect to last connected HFP device automatically. 3) Manual connecting to last connected A2DP device When the headset is in standby mode and doesnt connect to any A2DP devices, short press > (next song) button, it will connect to last connected A2DP device automatically. 6 Notes:
Before connecting to a Bluetooth device, please turn on the Bluetoth devices Bluetooth function.
On some Bluetooth devices, take some Nokia mobile phones for example, you have to allow automatic connecting in the mobile phones settings. Please refer to your mobile phones manual for further information. 4 Wearing the headset The string of this headset is retractable, please adjust according to the actual use. Logo L of headset represents left ear, Logo R of headset represents right ear. Please wear the headset according to the indication of the Logo. 5 Making calls with the headset Status of headset Operation Function Voice dial Standby mode Redial last number Volume up Volume down Answer calling Standby mode Conversation mode Conversation mode Ringing Reject calling Ringing Press and hold > (next song) button for 2s, release it till hearing indication sound Short press MFB twice quickly Short press or long press + key Short press or long press - key Short press MFB Press and hold MFB for 2s, and release it till hearing indication sound 7 Function End calling Call transfer Microphone mute Cancel mute Status of headset Conversation mode Conversation mode Conversation mode Conversation mode (mute) Operation Short press MFB Press and hold MFB for 2s, and release it till hearing indication tone Quickly press the MFB twice Quickly press the MFB twice Warning: Excessive pressure from headphones can cause hearing loss. Notes:
Not all the mobile phones support all the functions listed above. Please refer to the instruction of your mobile phone.
Some functions and indication tones may vary with different mobile phones. tone.
When the volume is adjusted to max or min, you will hear a indication
For some mobile phones, when you press the key of accepting on the phone, the conversation will be sent to the mobile phone. At this time, you can switch the call to headset by using the conversation switch button or through operating on the mobile phone. Please refer to the instruction of your mobile phone for further information. 6 Playing music When the headset connects with the mobile phone or Bluetooth transmitter which supports A2DP, you can enjoy music through headset wirelessly. Function Volume up Volume down Status of the headset Playing music Playing music Operation Short or long press + key Short or long press - key 8 Function Pause Play Last song Next song Status of headset Playing music Pausing Playing music Playing music Operation Short press MFB Short press MFB Short press < key Short press> key Notes:
For some of mobile phones, when they are playing music, the music will transmit to the speaker of mobile phone, you have to choose transmit the sound through Bluetooth in the setting of music play interface, and then choose BTH002N in the device list, the music will be transmitted to the headset. Please refer to the instruction of your mobile phone for further information.
When the volume of headset is adjusted to max. or min, you will hear a indication tone.
Remote control the function of last song/next song/pause/revert, it needs your mobile phone or Bluetooth transmitter supports AVRCP. Please refer to the instruction of your mobile phone or Bluetooth transmitter. for further information. 7 Restoring to factory defaults and resetting Make sure the headset is off, press and hold MFB and + buttons simultaneously for about 8 seconds, release them when you hear two DU tones and see red LED is on, now the headset restores to factory defaults, and the pairing information will be deleted. Charge the headset to make it reset. 8 LED indicator 1) Charging LED indicator Status of the headset Red LED is on Red LED is off Charging Finish charging 9 Status of the headset Pairing mode Not connected to a device Set up HFP or A2DP connection Set up HFP and A2DP connection Conversation mode Low power 2) Pairing with the Bluetooth devices LED Indicator Red and blue LEDs blink alternately Blue LED quickly blinks once every 2 seconds. Blue LED quickly blinks twice every 4 seconds Blue LED quickly blinks three times every 2 seconds Blue LED gradually turns on and off Red LED blinks twice every 20 seconds 9 Indication tone Indication tone Two tones every 3 seconds Status of headset Conversation mode and microphone mute Low power Three DU tones every 20 seconds
Care and maintenance Please read the following suggestions carefully, that will help you to fulfill any warranty obligations and to enjoy this product for many years.
Keep dry and dont put it in the dump place, in case of effecting the interior circuit of product.
Dont put the product under the sunlight or place hot areas. High temperature will short the life of electronic device, destroy the battery, or distort certain plastic.
Dont expose the product in the cold areas. It may damage the internal
Dont try to take apart the product. It may damage the product if you are
Dont fall off on the floor or knock the hard substance. It may damage circuit board. not professional. interior circuit.
Dont use intensify chemical or detergent to clean the product. 10
Dont scrap the surface with sharp things. In case the product doesnt function properly, send it to the store you bought it. The staff will help you to solve the problem.
FAQs 1 Why does red light blink twice every 20 seconds?
Battery is low, need to be recharged. 2 Why is not the red light bright when charging?
a) Please make sure the charging device connects with headset. well b) You didnt use the headset for a long time, the battery may dry up. At this time, you have to charge the battery for 30 minutes, and then the red light will be bright. 3 How far is the effective rang between the headset and mobile phone?
According to the Bluetooth standard, the max. controllable range of Class2 headset is 10 meters. It varies under different environment. 4 Why can not my cell phone search and find the headset?
The mobile phone will not find the headset if headset and mobile phone are not under the pairing mode, Make sure the headset is under the pairing mode and in the effective working range, and then the headset can be paired and connected. 5 Why can not hear the voice?
a) Make sure the headset has been switched on. b) Make sure the volume is not too low or muted. c) Make sure the headset connects with the mobile phone correctly. d) Make sure the distance between the headset and the cell phone is in the normal working scope. 6 Why is the voice not clear in conversation. a) Make sure the mobile phone is in the strong signal area. b) Make sure the headset is in the function range of this product. 7 Why cant control the function of pause, play, last song and next song when playing music?
This function needs your Bluetooth device supports AVRCP(Audio/Video Remote Control profile). 11
Specifications Bluetooth version Bluetooth profiles Effective range Working time Standby time Input Charging time Dimensions Weight Bluetooth V2.1+EDR Headset, Hands free, A2DP, AVRCP 10 meters Music: Up to 10 hours Talk: Up to 11hours Up to 250 hours DC: 5V/130mA Approx 3 hours 162153.532 mm Approx. 103 g Notes:
1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. 2. Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. 12