BTH018 Users Manual Content
Brief introduction........1 1. Bluetooth wireless communication technology.....1 2. About BTH018...1
Before use..2 1.Overview2 2. Charging for Headsets3
Using the headsets4 1. Turn on/off the headsets...4 2. Pairing headsets with Bluetooth devices.5 1) How to entering pairing mode.5 2) Pairing headsets with Bluetooth devices.5 3) Pairing headsets with Bluetooth transmitter.6 4) Pairing headsets with Multi-devices...7 3. Reconnect the headsets with devices...7 4. Wearing the headset.8 5. Making calls with the headset.8 6. Playing music..10 7. LED indicator..11 8. Indication tone.12
Care and maintenance.....12
FAQs..13
Specification....14 Welcome to use this Water-resistant Bluetooth stereo headset, BTH018. Please read this users manual carefully before use.
Brief introduction 1. Bluetooth wireless communication technology Bluetooth is a standard of close range radio-communication technology that was drawn up by Ericsson, IBM, Intel, Nokia and Toshiba in May, 1998. With Bluetooth technology, we can achieve the highest transmission rate among cell phones, computers, printers, PDAs and other devices. The max transmission the max is 10 meters while radio-communication range of class I can reach up to 100 meters. 2. About BTH018 BTH018 is a Water-resistant Bluetooth stereo headset. It support following Bluetooth profile:
HSP Headset Profile HFP Hands-free Profile A2DP Advanced Audio Distribution Profile AVRCPAudio/Video Remote Control Profile range of class II Profile HSP HFP A2DP AVRCP Description Headphone earpiece Related operation of phone call management Stereo music playback Remote control music(pause/play/previous track/next track) You can enjoy music wirelessly by using the BTH018. Fetures as following:
1) Pairing with the Bluetooth mobile phone and PDA which support HFP.
Answer, end and reject call from the headset
Redial last number
Voice dial
Adjust the volume
Switch the conversation between the headset and the mobile phone
Microphone mute 1 2) Pairing with Bluetooth music devices and Bluetooth transmitter which support A2DP.
Enjoy music wirelessly
Adjust the volume
Remote control pause/ play
Remote control last/next song 3) Easy to switch between conversation and music, you will not miss the incoming call during listening to music. 4) Every time the headset is switched on, it will automatically connect to the last paired device. Note: Even though the paired device and headset support the same Bluetooth profiles, the functions may be different due to the specification difference of the paired devices.
Before use 1.Overview 2 1 2 3 4 Status indicator light Charging jack Left speaker Right speaker 5 6 7 8 Built-in microphone Volume up/previous track Multifunction button Volume down/next track 2. Charging for Headsets First time charging Before you use this Bluetooth headset, please charge the battery of BTH018 fully. Low power When you hear three DONG tones every 20 seconds, at the same time, the red LED blinks twice. It means the battery is low power and need to be charged. 3 There are two ways of charging for headset:
Using travel charger:
1. Plug charger into standard AC power socket 2. Plug another side of charger jack into charging port of the headset RED light onCharging RED light offFinish charging 3. It will take about two hours to finish charging Using USB cable charger:
1. Plug USB cable into USB port of PC 2. Plug another side of USB cable into charging port of the headset RED light onCharging RED light offFinish charging 3. It will take about two hours to finish charging Note: Choosing travel charger or USB cable depends on different countries or areas and actual demands. Warning:
2) The battery is recyclable. 3) Do not dispose of the battery in fire, as it may cause explosion.
Using the headsets 1. Turn on/off the headsets Function Turn on Turn off Operation Press multifunction button about 3~5seconds and release it till the blue light blinks Press multifunction button about 3~5seconds and release it till the red light blinks Indicator light Blue light on 1 second light on 1 Red second 4 Note:
The headset will turn off automatically if it can not connect any devices within 5 minutes after turn on so that it can save power. 2. Pairing headsets with Bluetooth devices 1) How to entering pairing mode Function Enter pairing mode Operation Make sure the headset is turned off, if not,please thrn it off first. Press multifunction button about 6~7seconds, and release it till blue light and blink alternately. light red Indicator light Blue light and Red light blink alternately. Note:
Pairing mode will last 2 minutes, if the headset can not connect any other devices after 2 minutes, it will switch standby mode automatically. 2) Pairing headsets with Bluetooth devices Prior to using the headset for the first time, you have to pair it with a Bluetooth-enabled cell phone. The pairing procedures are subject to different models of cell phones. Please refer to your cell phone users manual for further information. The general pairing procedures are as follows:
Please keep the headset and mobile phone within 1 meter when pairing
Make the headsets enter pairing mode(please refer to How to entering pairing mode
Activate your mobile phones Bluetooth function and search Bluetooth devices within available range, and select BTH018 from the list of devices shown after search
According to the indication, enter password or PIN No: 0000, and 5 press Yes or Confirm button to confirm
After pairing sucessfully, choose BTH018 from the list of device shown and connect it
After connect sucessfully, headsetss blue light blinks twice every 4 seconds or blinks three times every 4 seconds Note:
If the pairing is not successful, please switch off headset firstly, and then re-pair according to the steps 1-6 mentioned above.
After pairing is successful, the headset and the mobile phone will remember each other, they will no need to re-pair next time.The headset can remember 8 paired devices, when the number of paired devices exceeds 8, the first one will be replaced.
If you want to pair the headset with other devices, please pair it with the new device according to steps 16 mentioned above. 3) Pairing headset with Bluetooth transmitter You can pairing headset with Bluetooth transmitter to enjoy wirelessly music. Hereby take BTT001 (Bluetooth transmitter for iPod, not included) for example. The pairing steps are as follows:
Keep the Bluetooth transmitter and the headset within 1 meter when
Make the headset enter pairing mode (please refer to How to enter pairing;
pairing mode);
Switch on the Bluetooth transmitter, it will search Bluetooth device
When the headset requests PIN No., the Bluetooth transmitter will
After successful pairing and connecting, blue light of the headset blinks automatically and start pairing;
respond 0000 automatically;
twice every 4 seconds. 6 Note:
The pairing password of the headset is 0000. So, the headset can only pair with a Bluetooth transmitter whose pairing password is 0000.
If pairing still fails after several tries, please refer to the Bluetooth transmitters users manual for further information. 4) Pairing headset with Multi-devices The headset can connect with two devices at most. One is a Bluetooth mobile phone supporting HFP profile, the other one is a Bluetooth music device supporting A2DP profile. If you want to finish the multi-pairing, please refer to the following steps:
Firstly, pair the headset with a Bluetooth transmitter (please refer to pairing the headset with a Bluetooth transmitter);
Switch off the Bluetooth transmitter;
Pair and connect the headset with a Bluetooth mobile phone (please refer to pairing the headset with a Bluetooth mobile phone).
Switch on the Bluetooth transmitter, it will connect to the headset automatically. Notes:
After successful pairing, the paired devices will remember each other. Unless pairing information is deleted because of new pairing, they will no need to pair next time. If the pairing information is deleted, please connect the mobile phone with the headset first and then switch on the Bluetooth transmitter, multi-connecting can be performed.
For the mobile phone supporting the HSP and A2DP at the same time. It may set up HSP and A2DP connection with the headset simultaneously. At this time, the Bluetooth transmitter may not connect to the headset. 3. Reconnect the headset with devices 1) Connect automatically After headset is opened, it will try to connect the last connected devices. 2) Artificial connect
When the headset not connect HFP device, please double-click 7 multi-function button, the headset will try to connect the last connected HFP devices.
When the headset not connect A2DP device, please long press for two seconds, the headsets will try to connect the last connected A2DP devices. 4. Wearing the headset As per the following pictures show, hang the headset on the ears with your both hands. You must use both hands to put on or take off the headset, dont pull or push the headset. Operation Short press multifunction button one time Short press multifunction button one time 5. Making calls with the headset 1) Basic conversation operation Function Status of the headset Cancel call Calling mode Answer call Ringing 8 Reject call Ringing End call Conversation mode Volume up Conversation mode Long press multifunction button for about 2 seconds and release it till you listen prompt tone Short press multifunction button one time Short press +button Conversation mode Short press button Conversation mode Long press multifunction button for 2 seconds Conversation mode Conversation mode Conversation mode(Microphone mute) Standby mode(have already connect with device) Standby mode(have already connect with device) Power off Long press multifunction button for 2 seconds Double-click multifunction button Double-click multifunction button Long press multifunction button for 2 seconds Double-click multifunction button Press multifunction button and +button at the same time for 8 seconds and release it till blue light and red light on at the same time for 1.5 second Volume down Call transfer to mobile-pho ne Call transfer earphone Microphon e mute Cancel mute Voice dial to Redial number last Delete pairing list 9 2) The operation of three-way call Function Status of the headset Answer new call and end current call Answer new call and retain current call Switch call End current call and switch retain call There are incoming call There are incoming call second second Keep conversation Keep conversation Operation Short press multifunction button Double-click multifunction button Double-click multifunction button Short press multifunction button Warning: : Excessive pressure form earphones and headphones can cause hearing loss. Note:
Not all the mobile phones support all the functions listed above. Please refer to your mobile phone users manual.
Different function and prompt tone according to different mobile phone.
When the volume is adjusted to max or min, you will hear a prompt tone.
When pressing the answer button on some mobile phones, the call will be transferred to the mobile phone. You can switch the call to the headset by using the conversation switch button or through operating on the mobile phone. Please refer to your mobile phone user manual for further information. 6. Playing music When the headset connects to a mobile phone or Bluetooth transmitter which supports A2DP, you can enjoy music wirelessly through the headset. Function Volume up Volume down Status of the headset Palying music Palying music Operation Short press +button Short press button 10 Palying music Palying music Palying music Pausing Long press +button for 2 seconds Long press button for 2 seconds Short press multifunction button Short press multifunction button Previous song Next song Pause play Notes:
When playing music on some mobile phones, the music will be transmitted to the mobile phones speaker instead of the headset. You have to select transmit the sound via Bluetooth in the settings menu and then choose BTH018 as speaker device. The music will be transmitted to the headset. Please refer to your mobile phones users manual for further information.
When the volume is adjusted to max. or min., you will hear a prompt
If you want to remote control last/next song, pause/play, it needs your Bluetooth mobile phone or Bluetooth transmitter paird with the headset to support AVRCP profile, please refer to the users manual of your mobile phone or Bluetooth transmitter for further information. tone. 7. LED indicator 1) Charging Red light on Red light off LED indicator 2) Pairing with the Bluetooth device LED indicator Red and blue light blink alternately Blue light quick blink one time every 2 seconds Blue light quick blink twice every 4 seconds Blue light quick blink three times every 4 seconds Status of the headset Charging Finish charging Status of the headset Pairing mode Not connected to a device Set up HFP or A2DP connection Set up HFP and A2DP connection 11 Blue light quick blink continuously Calling/incoming call Blue light quick blink one time every 4 seconds Red light quick blink twice every 30 seconds Conversation mode Low battery 8. Indication tone Indication tone Continuous two indication tone every 5 seconds Three dong warning tone every 30 seconds Status of the headset mode and Conversation microphone mute Low battery
Care and maintenance Read the following recommendations carefully before using BTH018. Following these you will be able to enjoy this product for many years.
Keep it dry and dont put it in the dump place to avoid the products internal circuit being affected.
Keep the product away from direct sunlight or hot places. High temperatures will shorten the life of electronic devices, destroy the battery or distort certain plastic parts.
Dont expose the product to cold areas. It may damage the internal circuit
Dont try to disassemble the product as it may get damaged if you are not board. professional.
Dont let it fall down onto the floor or other hard surfaces. The internal circuit might get damaged.
Dont use intensive chemical products or detergent to clean the product.
Dont scratch the surface with sharp things. In case the product doesnt function properly, send it to the store you bought it. The staff will help you to solve the problem 12
FAQs 1. What does it mean when red LED blink twice every 30 seconds?
Battery is low power, need to be recharged. 2. Why is the red LED off when charging?
a) Please make sure the charging device connect with headset Well;
b) You didnt use the headset for a long time, the battery may dry up. At this time, you have to charge the battery for 30 minutes, and then the red LED will be ON. 3. How far is the effective rang between the headset and mobile phone?
According to the Bluetooth standard, the max. available range of ClassII headset is 10 meters. It varies under different environment. 4. Why my mobile phone can not search and find the headset?
The mobile phone will not find the headset if headset and mobile phone are not under the pairing mode. Make sure the headset is under the pairing mode and in the effective working range, and then the headset can be paired and connected. 5. Why can not hear the voice?
a) Make sure the headset has been switched on;
b) Make sure the volume is not too low or muted;
c) Make sure the headset connects with the mobile phone correctly;
d) Make sure the distance between the headset and the cell phone is in the available Bluetooth range. 6. Why is the voice not clear in conversation?
a) Make sure the mobile phone is in the strong signal area;
b) Make sure the headset is in the available range of this product. 7. Why cant control pause, play, last song and next song when playing music?
This function needs your Bluetooth device supports AVRCP(Audio/Video Remote Control profile) 13
Specifications Bluetooth version Bluetooth profiles Operating distance Headset working time Headset standby time Charging input Headset charging time Dimension Weight Bluetooth V2.1+EDR Headset, Handsfree, A2DP, AVRCP 10meters Music: up to 7 houurs Talk: up to 8 hours Approx 180 hours DC5.0V Approx 2 hours 132*134.5*61mm Approx 35.3g 130mA Notes:
1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation. 2. Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. 14