FCC ID: 2A97U-K01PRO Fingerprint Lock

Model No.:K01PRO This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

-- Reorient or relocate the receiving antenna.

-- Increase the separation between the equipment and receiver.

-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-- Consult the dealer or an experienced radio/TV technician for help. Warning: changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.

aul || ig | rr | iy i ar \| uy in me Ta 1 mM a TT Tall Sey Wb Ah, Ib Ay Wb bb 14 LL of, Ab %, Ob % Ob % o ha o % st % % ba HA bb 8% bb % WW S/ bb % OL %% OL OL % 6 A % 8 wr 3 Sty i Mig 92 | i 4 O SZ 92 8 _ 92 82 22 v8 82 Of ve if 9s x v6 _ ge _SE 88 _9 cy St cZ_ OL 6y_ 91 48 91 ce Lt S48 ZI cs 8 c 61 02 8 02 vO2 L2 S29 22 88S 2 S8S 2 Ey. 60 LI Z Lb vy Li 69 LI 00 st ge Bt 92 81 b 6b O2 6b ae 02 82 CZ 8E_ 22 00 22 S 9 ZL Ze cb s9 ZI 00 1 cy el 68 L cy tl 00 SI ZO Sb 8b Ob iL 9b 69 Zt bil 8b cil 6 L

' an ie i falta 0 i sulin ane

; Atlin lil Linlind C c V G dilatlailt Iitillallaltait

nk ay uh i fl il mit shall li ill mn

Zhongshan Meta Intelligence Technology Co., Ltd. Attestation Statements C5266091_X24_Ed.2 TO:

Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 The Commission adopted rules for covered telecommunications equipment and video surveillance equipment produced by entities identified on the Commissions Covered List1, which is periodically updated. See the Covered List for more details. This Attestation Statement is to confirm that we follow the Section 2.911(d)(5)(i)-(ii) that prohibit equipment authorization 2A97U-K01PRO Applicant Company name: Zhongshan Meta Intelligence Technology Co., Ltd. Grantee code: 2A97U FCC ID:

FRN: 0033379488 Contact Name: Jun LI Address: No. 18, Yonghui Road, Nantou Town, Zhongshan, Guangdong, China Telephone No: 8618824669095 Fax No: 86 755 23221967 Email: Jason.li@metaintech.com i. ii.

[Zhongshan Meta Intelligence Technology Co., Ltd.] (the applicant) certifies that the equipment for which authorization is sought is not covered equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. The applicant must sign this certification.

[Zhongshan Meta Intelligence Technology Co., Ltd.] (the applicant) certifies that, as of the date of the filing of the application, the applicant [ is not] (as a specifically named entity or any of its subsidiaries or affiliates) identified on the Covered List as an entity producing covered equipment. The applicant must sign this certification.

[Zhongshan Meta Intelligence Technology Co., Ltd.] (the applicant) certifies that, as of the date of the filing of the application, the applicant [ is not] identified on the Covered List as an entity producing coveredequipment . Date: 2024/01/19 Applicants Name: Jun LI Title: Manager Signature 1 The Commissions Covered List is published by the Public Safety and Homeland Security Bureau and posted on the Commissions website. This Covered List, which is periodically updated, identifies particular equipment, produced by particular entities, that constitutes covered equipment. https://www.fcc.gov/supplychain/coveredlist 1/1

Zhongshan Meta Intelligence Technology Co., Ltd. C5266091_X10_Ed.2 Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Subject: Request for Confidentiality FCC ID: 2A97U-K01PRO To Whom It May Concern, Date: 2023-1-19 Pursuant to the provisions of Sections 0.457 and 0.459 of Commission's rules

(47CFR0.457, 0.459), we are requesting the Commission to withhold the following attachment(s) as confidential document from public disclosure. Exhibits ID Label/Location Attestation Statement External Photos Block Diagram Schematics Test Report Test Setup Photos Users Manual Internal Photos Parts List / Tune Up RF Exposure Info Operational Description Cover Letter(s) SDR Software / Security Info Long-Term Confidentiality No No No No No NOTE 1 NOTE 1 No No Short-Term Confidentiality NOTE 2 No No No No No No NOTE 1: Long-Term Confidentiality may be permitted under special conditions (See II. LONG-TERM CONFIDENTIALITY, Section 3 of KDB 726920, use last in force) NOTE 2: Short-Term Confidentiality can be requested for a maximum of 180 days from the date of the grant. Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. In case of short-term Confidentiality, the applicant requests the exhibits selected above are withheld from public view for a period of ______ days from the date of the Grant of Equipment Authorization and prior to marketing. It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. 1/1 C5266091_X10_Ed.2 Sincerely, Signature:

Name: Jun LI Title: Manager 2023.1.19 1/1

Model difference declaration letter Differences Description FCC ID: 2A97U-K01PRO We Zhongshan Meta Intelligence Technology Co., Ltd. state:

Product Model Name Fingerprint Lock K01PRO,K01, K01mini, K01A, K01B, K04, K04PRO, KNOB1, KNOB LOCK We (Zhongshan Meta Intelligence Technology Co., Ltd.) hereby state that all the models are electrical identical including the same software parameter and hardware design (i.e., circuit design, PCB Layout, RF module/circuit, antenna type(s) and antenna location, components on PCB, etc.,), same mechanical structure and design (including product enclosure, materials, etc.,), the only difference is the model name and appearance color. Signatory Date: 01-12.2024 Name:

Jun LI Date: Jan 12. 2024 Title:Manager Signature of applicant:

C5266091_X8_Ed.1 Letter of Authorization Zhongshan Meta Intelligence Technology Co., Ltd. Company: Zhongshan Meta Intelligence Technology Co., Ltd. Address: No. 18, Yonghui Road, Nantou Town, Zhongshan, Guangdong, China Product Name: Fingerprint Lock Model Number: K01PROK01, K01mini, K01A, K01B, K04, K04PRO, KNOB1, KNOB LOCK FCC Identifier: 2A97U-K01PRO We authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, to act on our behalf on all matters concerning the above named equipment. Any individual within LGAI Technological Center S.A. is authorized to act on our behalf and take action on the application. We declare that authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, is allowed to forward all information related to the approval project to the Federal Communication Commission and to discuss any issues concerning the approval application. Any and all acts carried out by LGAI Technological Center S.A. on our behalf shall have the same effect as acts of our own. Name: Jun LI Date: 2024.1.19 Title: Manager Signature of applicant:

1/1

US Agent for Service of Process LETTER OF ATTESTATION TO:Wilson Tech Service LLC Office of Engineering Technology Federal Communications Commission 7435 Oakland Millis Road Columbia, MD 21046 US Agent for Service of Process:

Company Name: Wilson Tech Service LLC FRN: 0033402033 Contact Name: Wilson Cheung Address: 1312 17th Street Suite 692,Denver,CO,80202,US Telephone No: +1-716-965-5112 :

Email; Wilson.Cheung.FDA@gmail.com Applicant:

Company name:Zhongshan Meta Intelligence Technology Co., Ltd. Product Description: Fingerprint Lock FRN:0033379488 Grantee code:2A97U FCC ID:2A97U-KO1PRO Contact Name:Jun LI Address:No. 18, Yonghui Road, Nantou Town, Zhongshan, Guangdong, China Telephone No:+86 13925412513 Email:Jason. | i@metaintech. com

[Zhongshan Meta Intelligence Technology Co., Ltd.] certifies that, as of the date of this filing of the application with the TCB, [Wilson Tech Service LLC] is our designated US agent for service of process for the above referenced FCC ID.

[Zhongshan Meta Intelligence Technology Co., Ltd.] accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any commission related proceeding involving equipment. [Wilson Tech Service LLC] accepts, as of the date of the filing of the application, the obligation of the designated US agent for service of process for the above reference FCC ID. The US Agent for Service of Process is aware of and agrees to comply with the requirements outlined in the FCC Equipment Authorization Program, Report and Order FCC 22-84, and clause 2.911. The Applicant is aware of and agrees to comply with the requirements outlined in the FCC Equipment Authorization Program, Report and Order FCC 22-84, and clause 2.911. Date: 2024/1/9 Applicant's Name:Jun LI US Agents Name: Wilson Cheung Signature CO) For and on behalf of 1/1 0006966000540 0009008000 00000 008 08 000 +00) Authorized Sig at