FCC ID: 2A7XQ-SK20220001 LED CEILING LAMP

LED SMART CEILING LAMP User Manual EN 1 3 5 Installation Manual 2 4 6 Package List:

1. Lamp body 2. Accessories Kits Remove the mounting bracket from the lamp according to the direction shown in the figure Drill the bottom hole for the expansion rubber plug at the position of the pre-installation surface, and drive the expansion rubber plug into the bottom hole Fasten the mounting bracket with screws Connect the lamp power cord to the power input cord Hold the lamp with both hands, and push it into the fixed mounting bracket EN APP User Manual 1.Search for Smart Life in Apples App Store and other major app stores or scan the following QR code to download the Smart Life app. 2.After installing the APP (the first time you use the APP, you need to complete the registration), turn on the WIFI and Bluetooth functions of your mobile phone..Note:

The lighting distribution network must be 2.4G WIFI, not suitable for 5G WIFI 3.Open the Smart Life APP to automatically add devices. When using the "Auto Add"

feature, you need to allow the APP to enable WIFI and Bluetooth permissions. If the WIFI permission is not enabled, the WIFI device cannot be searched; If the Bluetooth permission is not enabled, the nearby Bluetooth devices cannot be searched. 4. For the first time, power on the ceiling lamp, if the light is cool white and in a breathing and flashing state, it means entering the APP pairing mode;

If the light cool white and always on, the lamp needs to be re-open the APP pairing mode. Please turn the switch on and off 3 times (on-off-on-off-on-off-on) to reset the device. Enter the WIFI password, and the network can be successfully configured. When the APP pairing mode is successful, the light will change to warm white.

(NOTE: 1. During use, if you want to unbind the lamps, you can delete the device in the APP; 2. If it is not connected to the network, the lamp will re-enter the APP pairing mode when it is powered on every time.) 5. Memory Function: If you turn on the smart lamp again by remote control, wall switch or APP, it can activate the last used color and brightness setting when you turn it on.

(Please note: To activate the Memory Function, the color and brightness setting of the lamp must keep 5 seconds at least.) EN 6. You can find the lamp name "SMART-CEILING LAMP" in APP Add Device Add SMART-

CEILING LAMP Main interface:

ON/OFF White Light Adjustment Interface: brightness adjustment, color temperature adjustment RGB Light Adjustment Interface: brightness adjustment, color adjustment, color rendering adjustment Multiple Scene Switching:

NightReadWorking LeisureSoftColorful DazzlingGorgeous EN Custom Mode: scene name, color, flash mode, flash speed Timer Setting Plan Schedule Rhythms Power-on behavior Custom Schedule:

sleeping time, wake up time Sleep Mode Wake Mode EN Rhythms: Customize lamps brightness and color based on your biorhythm timing Power Memory: Mainly suitable for areas with frequent power outages Settings:

Third-party Control Share Device Create Group Binding an Amazon account, you can control the lights through Alexa voice Binding a Google account, you can control the light through Assistant voice Share Device:

Share device to family, devices in the same group can be controlled together EN Bluetooth Remote Control Function Description:

1.OFF 2.Brighten 3.RED Color Light 4.Warm White 5.Nature White 6.Dynamic Mode 1 7.Dynamic Mode 2 8.Purple Color Light 9.Orange Color Light 10.Timing: 1 hour 11.Timing: 2 hour 12.Unpairing 13.ON 14.Pairing 15.Dimmed 16.Blue Color Light 17.Green Color Light 18.Cool White 19.Dynamic Mode 3 20.Dynamic Mode 4 21.Coral red 22.Teal green 23.Timing: 4 hour 24.Timing: 8 hour Pairing settings of the bluetooth remote control:

(1) During the APP pairing mode, the lamp cannot enter the pairing state with the Bluetooth remote control.

(2) When the APP pairing mode exits or succeeds, it will immediately enter the pairing state with the Bluetooth remote control, and the timeout will be 15 seconds.

(3) When the lamp is in the pairing state with the Bluetooth remote control, long press the "Pairing" button of the Bluetooth remote control for 3 seconds, and the pairing is successful.

(4) Successful pairing light effect: cool white light flashes 5 times.

(5) "Unpairing" Button: long press for 3 seconds to unbind the Bluetooth remote control from the lamp FCC WARNING:

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

-Reorient or relocate the receiving antenna.

-Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-Consult the dealer or an experienced radio/TV technician for help. Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body. Colorful life, Start here

ZHONGSHAN SUNKA LIGHTING TECHNOLOGY CO., LTD Add: 3rd Floor, No. 4, Beiyi Lane, Hua'an East Road, Caosan Pioneer Park, Zhongshan City,Guangdong Province China Date: 2022-7-26 FCC ID: 2A7XQ-SK20220001 Dear Sir/Madam, We, ZHONGSHAN SUNKA LIGHTING TECHNOLOGY CO., LTD Hereby declares the following statement for Federal Communications Commission, PCB board, circuit, structure and internal of these model(s) are the same, Only model number is different for these model:

Product name: LED CEILING LAMP Model no.: SKCL-300, SKCL-230, SKCL-380, SKCL-220, SKCL-280, SKCL-300/A/F, SKCL-300/B/F Sincerely, Name/Title Company:

Address:

Phone:

Fax:

E-Mail:

Shurong Zhong/PM ZHONGSHAN SUNKA LIGHTING TECHNOLOGY CO., LTD 3rd Floor, No. 4, Beiyi Lane, Hua'an East Road, Caosan Pioneer Park, Zhongshan City,Guangdong Province China 15307488833 N/A 515601523@qq.com

CONFIDENTIALITY REQUEST for Certification Service in USA Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21046 Date:<2022-7-26>

Pursuant to Paragraphs 0.457 and 0.459 of the Commissions Rules (47 C.F.R.) and Section 552(b)(4) of the Freedom of Information Act, we requests confidentiality for the following products:

FCC ID 2A7XQ-SK20220001 Model name SKCL-300 For the product stated above, we request that the following information be held confidential;

Exhibits Long-Term Confidentiality Short-Term Confidentiality Short-Term Confidentiality Days External Photos Internal Photos Block Diagram Schematics Test Setup Photos Users Manual Parts List Tune Up Operational Descriptions The long-term confidentiality exhibits contain our trade secrets and proprietary information that could be of benefit to our competitors. The short-term confidentiality on the basis of ensuring that business sensitive information remains confidential until the actual marketing of our new device. If you have any questions, please feel free to contact me at the address shown below. Sincerely, Name/Title Company:

Address:

Phone:

Fax:

E-Mail:

Shurong Zhong/PM ZHONGSHAN SUNKA LIGHTING TECHNOLOGY CO., LTD 3rd Floor, No. 4, Beiyi Lane, Hua'an East Road, Caosan Pioneer Park, Zhongshan City,Guangdong Province China 15307488833 N/A 515601523@qq.com

ZHONGSHAN SUNKA LIGHTING TECHNOLOGY CO., LTD 3rd Floor, No. 4, Beiyi Lane, Hua'an East Road, Caosan Pioneer Park, Zhongshan City,Guangdong Province China Date: 2022-7-26 FCC ID: 2A7XQ-SK20220001 Model Number: SKCL-300 To:

Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD To Whom It May Concern, We, ZHONGSHAN SUNKA LIGHTING TECHNOLOGY CO., LTD , declare that this EUT (FCC ID: 2A7XQ-SK20220001) doesnt have Ad Hoc mode function on non-US/Canada frequencies. In addition. The frequency selection feature is disabled by firmware for devices marked to the US/Canada. For DTS part of this device, only channels 1-11 will be used in North America, Country code selection is disabled. Should you have any questions or comments regarding this matter, please have my best attention. Sincerely, Name/Title Company:

Address:

Phone:

Fax:

E-Mail:

Shurong Zhong/PM ZHONGSHAN SUNKA LIGHTING TECHNOLOGY CO., LTD 3rd Floor, No. 4, Beiyi Lane, Hua'an East Road, Caosan Pioneer Park, Zhongshan City,Guangdong Province China 15307488833 N/A 515601523@qq.com

ZHONGSHAN SUNKA LIGHTING TECHNOLOGY CO., LTD 3rd Floor, No. 4, Beiyi Lane, Hua'an East Road, Caosan Pioneer Park, Zhongshan City,Guangdong Province China Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 To whom it may concern:

2022-7-26 We, the undersigned, hereby authorize Eurofins Product Service GmbH to act on our behalf in all matters relating to applications for equipment authorization FCC ID: 2A7XQ-SK20220001 including the signing of all documents related to these matters. as acts of our own. Any and all acts carried out by Eurofins Product Service GmbH on our behalf shall have the same effect By signing this application form, we agree to Eurofins current valid General Terms and Conditions

(AGB),Testing and Certification Regulations (PZO) which can be viewed on following website www.eurofins.de/ee or retrieved on request. We also hereby certify that no party to this application is subject to a denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Sincerely, Name/Title Company:

Address:

Phone:

Fax:

E-Mail:

Shurong Zhong/PM ZHONGSHAN SUNKA LIGHTING TECHNOLOGY CO., LTD 3rd Floor, No. 4, Beiyi Lane, Hua'an East Road, Caosan Pioneer Park, Zhongshan City,Guangdong Province China 15307488833 N/A 515601523@qq.com