all | frequencies |
|
exhibits | applications |
---|---|---|---|---|
manual |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 |
|
User Manual | Users Manual | 3.23 MiB | April 04 2019 / July 04 2019 | |||
1 | External Photos | April 04 2019 / July 04 2019 | ||||||
1 | Cover Letter(s) | April 04 2019 / July 04 2019 | ||||||
1 | Internal Photos | April 04 2019 / July 04 2019 | ||||||
1 | ID Label/Location Info | April 04 2019 / July 04 2019 | ||||||
1 | RF Exposure Info | April 04 2019 / July 04 2019 | ||||||
1 | Test Report | April 04 2019 / July 04 2019 | ||||||
1 | Test Setup Photos | April 04 2019 / July 04 2019 |
1 | User Manual | Users Manual | 3.23 MiB | April 04 2019 / July 04 2019 |
version:1.0 User Manual Body Fat Analyzer GBF-1406-B ZHONGSHAN TRANSTEK ELECTRONICS CO., LTD No.23,Jin'an Road, Minzhong, Zhongshan, 528441, Guangdong, China TEL:86-760-88282982 www.transtek.cn Thank you very much for selecting the Transtek Body Fat Analyzer GBF-1406-B. Please do read the user manual carefully and thoroughly so as to ensure the safe usage of this product, and keep the manual well for further reference in case you have problems. Appendix FCC Regulations FCC User Guide Information Radio Frequency Interface Requirements - FCC Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna;
Increase the separation between the equipment and receiver;
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected;
Consult the dealer or an experienced radio / TV technician for help. Radio Transmitters (Part 15) This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. FCC RF Exposure Guidelines Safety Information Reducing RF Exposure - Use Properly Only operate the device in accordance with the instructions supplied. This device complies with FCC radiation exposure limits set forth for an uncontrolled environment. 24 Table of Contents Table of Contents Safety Information Safety and Usage Information Tips
............................................................................................... .......................................................................................................................................... Overview Device Components List LED Display Initial Start-Up
................................................................................................................. ......................................................................................................................................... ............................................................................................................................. General Instructions Insert the Batteries Install App and Pair-up Select Measurement Unit Initialising Your Scale Weight Only Operation Set Up Your Profile
................................................................................................................. .................................................................................................................. ............................................................................................................ ....................................................................................................... .............................................................................................................. ............................................................................................................. ................................................................................................................ Start Measuring First Measurement Daily Measurement Manage Your Health Backlight Indicator Data Transmission
................................................................................................................... ................................................................................................................. ................................................................................................................... ................................................................................................................... Troubleshooting Error Prompt When Measuring ... When Data Transmitting... ............................................................................................................................ ................................................................................................................. ....................................................................................................... ........................................................................................................................... .............................................................................................................................. ..................................................................................................................................... Specifications Maintenance Warranty Appendix Table of Body Fat Level Table of Body Water Level Muscle Mass Percentage Bone Mass Percentage Health Tips About Body Fat EMC Guidance FCC Regulations
.......................................................................................................... ..................................................................................................... ......................................................................................................... ............................................................................................................. ................................................................................................ ........................................................................................................................ ..................................................................................................................... 2 3 4 4 5 6 6 7 8 8 8 9 11 12 13 13 14 14 16 17 18 18 19 19 20 20 20 21 24 1 Safety Information Safety Information Safety and Usage Information The warning signs and symbols are essential to ensure your correct and safe use of this product and protect you and others from injury. Please kindly find the meanings of the warning signs and symbols, which you may encounter in the label and user manual, as follows:
INDICATIONS FOR USE The Transtek Body Fat Analyzer measures weight and uses bio-electrical impedance analysis
(BIA) technology to estimate body fat, total body water percentage, bone mass, and muscle mass in generally healthy children 10-17 years old and healthy adults. It is intended for use in the domestic setting only. Symbol for THE OPERATION GUIDE MUST BE READ Symbol for COMPLIES WITH EU REQUIREMENTS The Bluetooth Combination Mark Symbol for MANUFACTURER Symbol for MANUFACTURE DATE Symbol for SERIAL NUMBER Symbol for DIRECT CURRENT Symbol for ENVIRONMENT PROTECTION Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Check with your local authority or retailer for recycling advice CAUTION Transteks Body Fat Analyzer GBF-1406-B offers you a seamless way to manage your health. Please be aware that this device is designed for healthy population over 10 years old self-measuring and self-monitoring body compositions. Any information provided by this device is in no way meant to treat, cure or prevent any disease or illness from happening. If in doubt, contact your physician. This device is contraindicated for any female subject who may be suspected of, or is pregnant. Otherwise, the effects of this device on the fetus are unknown. This device is contraindicated for any person who is connected to a wearable or implantable electronic device or instrument such as a pacemaker or defibrillator. This device should not be used for anyone who is acutely or chronically ill because of suffering from a disease or taking medications that affect your water levels. The accuracy of readings for these patients has not been verified. Specific medical advice should be obtained from a physician. GBF-1406-B is equipped with data transmission function. It may emit electromagnetic energy so as to perform its intended function. Nearby portable and mobile RF communications equipment can affect the performance of GBF-1406-B. And the device can interfere vicinity electrical equipment. Manufacturer will make available on request circuit diagrams, component parts list,etc. WARNING:No modifications of this equipment is allowed. This may result in increased EMISSIONS or decreased IMMUNITY of GBF-1406-B. Please use the device according to the user manual. Any misuse can cause electric shock,burns, fire and other unexpected hazards. Please use and storage the device under the environment which was provided in the user manual. Dont expose the device to extreme temperatures, direct sunlight, moist or corrosive environment. Do not step on the scale when your body or feet are wet, especially after bathing or showering to prevent slipping. Please keep the device out of reach of infants, children or pets, since inhalation or swallowing of small parts is dangerous or even fatal. Please don't use the device out of lifetime any more because degraded sensors and electrodes, or loosened electrodes can degrade performance or cause other problems. If you have an allergy to stainless steel, please avoid to contact to the electrodes of the device. The patient is an intended operator. The patient can measure, transmit data and charge battery under normal circumstances and maintain the device and its accessories according to the user manual. 2 Tips To ensure the accuracy of measurement, please follow below instructions when you start measurement. Place the scale on a flat, hard surface. Soft surface such as carpet will affect the performance of the scale. Step onto the platform with bare feet. Stand still and keep full contact with the electrodes until the measurement is complete. Start measurement at least two hours after Getting up or Dinning. Avoid measurement immediately after strenuous exercise, sauna or bath, drinking, and dinning. Always start measurement in the same time slot and on the same scale located on the same flat, hard surface. For maximum accuracy and repeatability , it is recommended that you should use the device in the same time of the day and on the same location. The condition of the skin on the bottom of your feet can affect the reading. The natural effects of aging or activity can make this skin hard. Take the reading with clean, slightly damp feet for best accuracy. If you are having a problem on operating this scale please contact customer service. Body fat percentage estimates will vary with the amount of water in the body, and can be affected by dehydration or over-hydration due to such factors as alcohol consumption, menstruation, illness, intense exercise, etc. 3 Overview Device Components LED Display Overview LED Display Up Key Set Key Down Key UNIT and activation Button Battery Compartment List 1. Body Fat Analyzer GBF-1406-B 2. Four AAA-size Batteries (1.5V per each) 3. User Manual Body Fat Analysis Result Total Body Water Analysis Result Muscle Mass Analysis Result Bone Mass Analysis Result Age Foot Stone Pound Centimeter Kilogram Percentage Male Male Athlete Female Female Athlete User ID (Range from P1 to P8) Body Fat Level: Underfat Body Fat Level: Healthy Body Fat Level: Overfat Body Fat Level: Obese Successful Bluetooth Connection Data transmitting / pending to transmit to wireless wellness system 4 5 Initial Start-Up Initial Start-Up General Instructions Transtek Body Fat Analyzer GBF-1406-B applies BIA (Bio-impedance Analysis) technology. A small amount of weak current flows through the human body so as to detect the bio-impedance and estimate body fat, body water, muscle mass and bone mass. The electrical current is small and may not be felt. This BIA technology is cheap, safe, non-invasive, toxic-free and harmless. It also possesses the characteristics of simple operation and abundant information. The current mentioned above is less than 0.5mA. However, please be aware that anyone with an wearable or implantable medical electronic instrument, such as a pacemaker, must avoid using this device. The intended use of this device is for healthy children 10-17 years old and healthy adults. Install App and Pair-Up With the advanced Bluetooth 4.0 technology applied, the mobile or portable equipments, which are equipped with Bluetooth function in line with BLE Technical Specifications as well as BLP Protocol established by global organization Bluetooth SIG, are capable to receive your personal health data. Just simply install the specially-designed app and pair up your scale with your mobile or portable equipments. Then you may enjoy the comprehensive health solution provided by Transtek. Note: It is only available for the device which supports Bluetooth 4.0 technology. Insert the Batteries Open the battery door in the back of the scale. Remove insulating strip from beneath the battery (if fitted) or insert batteries (4 x 1.5V AAA) observing the polarity signs (+ and -) inside the battery compartment.
* The digits 8888 will be shown on the LED. Close the battery door and wait until the digits 0.0kg are shown on the LED. CAUTION When the symbol Lo appears, the device will power off after about 4s. Then you shall replace with a new set of batteries. Please replace all four batteries at the same time. Do NOT mix the old batteries with the new one. Worn batteries are hazardous waste. Do NOT dispose of them together with the household garbage. Please refer to the local ordinances and recycling instructions regarding disposal of the worn batteries and scrapped device. If you do not intend to use this unit for a prolonged period of time, it is advisable to remove the batteries before storing. 6 Our App Medm Health could be freely downloaded at App Store and Google Play, you may search and install it in your smartphone. Turn on Bluetooth and the App. Make sure both are ON when pair-up is proceeding. Press and hold UNIT button in the back of the scale to start pair-up. Symbol and symbol will be shown on the LED alternatively, indicating pair-up is proceeding. If SUCCEED, symbol will be shown on the LED. If FAIL, symbol E1 will be shown on the LED. 7 Initial Start-Up Select Measurement Unit Initial Start-Up With batteries correctly installed, press UNIT button in the back of the scale to select measurement unit. The default measurement unit is kg. You may press UNIT button to choose among kilogram, stone and pound. 1. Position the scale on a flat, hard surface. Carpeted or uneven floors may affect accuracy. 2. Step onto the scale platform and remain still while the scale computes your weight. 3. The scale will display your weight value. Initialising Your Scale 1. Press the platform centre and remove your foot. 2. 0.0 will be displayed. 3. The scale will switch off and is now ready for use. This initialisation process must be repeated if the scale is moved. At all other times step straight on the scale. Weight Only Operation Your TRANSTEK Body Fat Analyzer will operate as a conventional weight - reading scale. No special programming steps are required. Once the scale is initialized, as previously described, you may simply step on the scale to measure your current weight. For only weight reading. 4. The scale will automatically turn off after a few seconds. Note: The weight value wont be saved in the scale, and wont be transmitted to the APP. Set Up Your Profile The body fat analyzer GBF-1406-B supports multiple users (Up to 8). You may follow below instructions to assign User ID and set up your own profile, including Gender, Stature, and Age. 1.Assigning User ID With batteries correctly installed, press SET key to enter setting mode when the scale is off. Or when the LED displays 0.0, press and hold SET key to enter setting mode. The system will request User ID selection first. As pictured below, P1 blinks. The operator may press the function key or to select User ID among P1 to P8. Press SET key to confirm User ID. 2.Setting Gender After confirming User ID, the system will divert to Gender setting automatically. As pictured below, the portrait blinks. The operator may press the function key or to select Gender.( Male/Female/Male Athlete/ Female Athlete). Press SET key to confirm Gender. 8 9 Initial Start-Up Start Measuring Athlete Mode:
An athlete is considered as a person who does 10 hours or more per week of aerobic activity and has a resting heart rate of 60 beats per minute.These individuals should select Athlete Mode for the most accurate measurement results.The body fat analyzer are not calibrated for professional athletes or body builders. First Measurement Please process the user setting before your first measurement.
(Refer to Set Up Your Profile for more details) STEP 1: Step on the platform barefooted when the LED displays 0.0. 3.Setting Stature After confirming Gender, the system will divert to Stature setting automatically. As pictured below, the digits 165 blinks. The operator may press the function key or to increase or decrease the numeral (Ranges:100cm-220cm/33.5ft - 72.5ft). You may press and hold the function key or for fast changing the numeral. Press SET key to confirm Stature. STEP2: Stand still and the weight data will be locked with the numeral blinks twice. Keep full contact with the scale until the LED stop displaying moving o . 4.Setting Age After confirming Stature, the system will divert to Age setting. As pictured below, the digits 30 blinks. The operator may press the function key or to increase or decrease the numeral (Range for normal mode: 10-85 years old, Range for athlete mode:15-85 years old ). You may press and hold the function key or for fast changing the numeral. Press SET key to confirm Age. STEP 3: Then the measuring results will be displayed sequentially three times: Body Fat, Total Body Water, Muscle Mass, Bone Mass.
* When the body fat percentage is displayed, the body fat level also appears on the LCD. it ranges from Underfat to Obese. After confirming Age, the LED will show all the settings you have done one by one and then display 0.0kg+User ID+ Gender, you can start measuring. Underfat Healthy Overfat Obese
* If it fails to complete the analysis, the LED will display the icon Err.
(To find out the solutions, please refer to Troubleshooting for more details.) 10 When your scale is successfully paired with your smartphone and the Bluetooth is ON, GBF-1406-B will process data transmission instead.
(Please refer to Data Transmission for more details.) 11 Start Measuring Daily Measurement With original SENSE ON patent technology, GBF-1406-B will switch on as you step on the platform barefooted. Stand still and keep full contact with the scale until the LED stops displaying moving o. Manage Your Health Backlight Indicator The indicator backlight will light with different color when the measuring results are shown on the LED. Compared with the last record of the same user ID, when the current weight is increased over 0.5kg, the red backlight lights; when it is reduced over 0.5kg, the green backlight lights; when it is the same(in the range of +/-0.5kg), the blue backlight lights. Note: when it is the first measurement for a User ID, the system default backlight is blue. After the weight is locked, the system will automatically identify the possible User ID with most similar history records. If it identifies one user, it will skip the step about user selection, then display the Body Fat, Total Body Water, Muscle Mass and Bone Mass data sequentially three times and turn off. If it identifies two or more users,for example, P1, P2 and P3,The LCD will display these users altermately twice. you may press key to choose the left User ID or press key to choose the right User ID. The measuring results will then be sorted into the User ID you selected and displayed sequentially three times. If you dont choose the user, it will display the weight again and turn off after a few seconds. Data Transmission Once the Body Fat Analyzer GBF-1406-B is successfully paired-up with your smartphone, please open the Medm Health App and turn on your Bluetooth. Keep smartphone and scale in transmission distance. Step on the scale and take a measurement. Once the measurement is finished the data is automatically transferred to the app. ONLY when the measuring results are attached to a specific User ID will it be transmitted to your mobile after measurement. The symbol will disappear after successful data transmission, and you may check your personal health data stored in your smartphone. If the data transmission fails, the symbol will remain. The pending measurement data will be temporarily kept in the scale and transmitted to your smartphone when next measurement is complete. CAUTION Successful Bluetooth Connection Data transmitting to wireless wellness system:
-If SUCCEED, the symbol disappears;
-If FAIL, the symbol remains. If it fails to identify the possible User ID, the LED will only display the weight data.
(To find out the solutions, please refer to Troubleshooting for more details.) When your scale is successfully paired with your smartphone and the Bluetooth is ON, GBF-1406-B will process data transmission instead.
(Please refer to Data Transmission for more details.) 12 Interference may occur in the vicinity of equipment marked with the following symbol . And the Analyzer may interfere vicinity electrical equipment. To enable the data transmission function, this product should be paired to a Bluetooth 4.0 end. How to mitigate possible interference?
1. The range between the Analyzer and the Bluetooth end should be reasonably close, from 1 meter to 10 meters. Please ensure no obstacles between the Analyzer and the Bluetooth end so as to obtain quality connection. 2. To avoid interference, other electronic devices (particularly those with Bluetooth transmission
/ Transmitter) should be kept at least 1 meter away from the Analyzer. 13 Troubleshooting Error Prompt Troubleshooting Error Description Solution Problem Root Cause Solution Overload. The device will power off. Stop using this scale for measurement. Low Battery. The device will power off after about 4s. Failure of pairing up your scale with your smartphone. 1. The user profile set up and the scale fails to complete the analysis. 2. The weight is unstable. Replace all four batteries in the same time. Please purchase the authorized batteries for replacement. Please check below items:
-Bluetooth is ON.
-App Collector is ON.
-Both devices are within the transmission distance of Bluetooth. Step off the platform, and measure again. When Measuring ... Problem Root Cause Solution Incorrect posture Please step on the platform barefooted and stand still. Abnormal measuring results:
- Too high; OR
- Too low; OR
- Huge difference between two recent measurement. No display on LED when the device powers on. CANNOT proceed to analyze body fat, total body water, muscle mass and bone mass. Your feet are too dry. Wipe your feet with a damp cloth, keeping them slightly damp when starting measurement. Batteries not yet installed. Worn batteries. Step onto the platform wearing socks or shoes. Install the batteries.
(Please refer to Insert the Batteries) Replace all four batteries at the same time. Please purchase the authorized batteries for replacement. Please keep barefooted during the measurement, and keep full contact with the scale as well. The system cannot identify the possible User ID with most similar data. Please assign a User ID following the instruction in Set Up Your Profile. The user fails to select the User ID from what the system found. Please assign a User ID following the instruction in Set Up Your Profile. The device is located on the soft ground such as a carpet OR on a rugged surface. Please place the device on a flat, hard surface. The device powers off. Low battery. Replace all four batteries at the same time. Please purchase the authorized batteries for replacement. 15 Abnormal measuring results:
- Too high; OR
- Too low; OR
- Huge difference between two recent measurement. 14 Troubleshooting When Data Transmitting ... Problem Root Cause Solution Specifications Specifications Product Name Dimension Net Weight Display Body Fat Analyzer Scale: 307x307x24mm (Approximately) Approximately 1.82kg ( Including the dry cells) Digital LED Bluetooth is OFF. Turn ON the Bluetooth via setting function of your smartphone. Measurement Unit Kilogram / Stone/ Pound Measurement Range 5kg to 180kg / 0st: 11lb to 28st: 5lb / 11lb to 397lb The App is OFF. Press the icon to run your App. Data transmission failed. Out of range of Bluetooth transmission. Place your smartphone closer to the scale. None of the user ID is assigned. Please assign a User ID following the instruction in Set Up Your Profile. Division Accuracy Working Environment Storage Environment Power Source Auto-ON Auto-OFF Accessories Mode of Operation 100kg: 0.4kg;
180kg: 0.7kg Relative Humidity: 90% RH 0.1kg / 0.2lb / st:0.2lb/1lb (20st) 50kg: 0.3kg;
150kg: 0.5kg;
Temperature: 5 to 40 Atmospheric pressure: 86kPa to 106kPa Temperature: -20 to 60 Relative Humidity: 90% RH Atmospheric pressure: 50kPa to 106kPa 6V (Four AAA-size Batteries) SENSE ON technology About 10s after the LED display 0.0;
About 15s when the weight value is unstable. 1. Four AAA Size Batteries 2. User Manual Continuous Operation BT Frequency Range 2402MHz to 2480MHz BT Output Power Less than 5dBm Bluetooth Module No BT Supply Voltage AW2540 1.8-3.6V Software Version Protection Against Ingress of Water B08 IP21 16 About the Accuracy of This Product This product passes strict inspection before delivery and therefore its accuracy is guaranteed by the manufacturer. Please refer to the above table for the descriptions on accuracy. This product is specially designed for body fat analysis as well as weight measurement. It should NOT be used by 17 anyone during the process of transaction for verification of goods weight. Maintenance Maintenance When carrying out usual maintenance, please ensure practice of the following Dos and Donts:
DO use a dry soft cloth to wipe the dust. DO use a wet soft cloth, dipped into water and wrung out, to wipe the dirt. Then use a dry soft cloth to dry up the device. DONT wash the device with water or immerse it in water. DONT use propellant, abrasive or other chemicals to wipe the dirt in avoidance of discolor or malfunction. DONT disassemble this device. If you have any problems, please contact Transtek.
(Please refer to Warranty for contact information) Do not dispose of batteries in fire. Batteries may explode or leak. Remove the batteries if the scale will not be used for a long period. Warranty Transtek warrants its products free of defects in materials and workmanship in normal use for a period of TWO years from the date of retail purchase. This warranty does NOT cover damages caused by misuse or abuse, including but not limited to:
Failure caused by unauthorized repairs or modifications;
Damage caused by shock or drop during transportation;
Failure caused by improper operation inconsistent with the instructions stated in this user manual;
Malfunction or damage from failure to provide the recommended maintenance;
Damage caused by improper use of power supply. Should this device require maintenance (or replacement at our option) under warranty, please deliver the original package to ZHONGSHAN TRANSTEK ELECTRONICS CO., LTD prepaid. Please return the store receipt (with the retail purchase date) and a note with reasons to return on it as well. ZHONGSHAN TRANSTEK ELECTRONICS CO., LTD No.23,Jin'an Road, Minzhong, Zhongshan, 528441, Guangdong, China Tel: 86-760-88282982 Website: http://www.transtek.cn Appendix Table of Body Fat Level (Unit: %) a) The body fat percentage (%): 5%-60%/0.1%
Standard for Men Standard for Women Rating low Normal Moderately High High 20-29
<13 13-20 30-39
<14 14-21 Age 40-49
<16 16-23 50-59 60+
<18
<17 17-24 18-25 20.1-23 21.1-24 23.1-26 24.1-27 25.1-28
>23
>24
>26
>27
>28 Rating low Normal Moderately High High Age 40-49
<21 21-30 20-29
<19 19-28 30-39
<20 20-29 60+
<23 23-32 28.1-31 29.1-32 30.1-33 31.1-34 32.1-35 50-59
<22 22-31
>31
>32
>33
>34
>35 Source: University of Illinois Department of Food Science and Human Nutrition. Body Fat Percentage Calculator. Table of Body Water Level (Unit: %) b) The body water percentage (%): 43%-73%/0.1%
Source: Derived from Wang & Deurenberg: Hydration of fat-free body mass. American Journal Clin Nutr 1999,69833-841. BF % RANGE 4 to 14%
15 to 21%
22 to 24%
25 and over 4 to 20%
21 to 29%
30 to 32%
33 and over OPTIMAL TBW % RANGE 70 to 63%
63 to 57%
57 to 55%
55 to 37%
70 to 58%
58 to 52%
52 to 49%
49 to 37%
Men Women 18 19 Appendix Appendix Warning Muscle Mass Percentage
(Source: International Commission on Radiological Protection,1975) Men Women Approximately 40% of total body weight Approximately 30% of total body weight Bone Mass Percentage
(Source: Rico et al.1993) The average bone mass percentage for both men and women is between 4 to 5%. Dont near active HF SURGICAL EQUIPMENT and the RF shielded room of an ME SYSTEM for magnetic resonance imaging, where the intensity of EM DISTURBANCES is high. Use of this equipment adjacent to or stacked with other equipment should be avoided because it could result in improper operation. If such use is necessary, this equipment and the other equipment should be observed to verify that they are operating normally. Use of accessories, transducers and cables other than those specified or provided by the manufacturer of this equipment could result in increased electromagnetic emissions or decreased electromagnetic immunity of this equipment and result in improper operation. Portable RF communications equipment (including peripherals such as antenna cables and external antennas) should be used no closer than 30 cm (12 inches) to any part of the model GBF-1719-B, including cables specified by the manufacturer. Otherwise, degradation of the performance of this equipment could result. Health Tips - About Body Fat Fat is essential for human body. It can not only store energy and protect viscera, but also regulate body temperature and maintain normal physiological function of human body. However, too much body fat is harmful to human body. It is always accompanied by Fatty Liver, diabetes, coronary heart disease, etc. Therefore self-measuring and self-monitoring body fat level are beneficial to your health. Since we cant judge body fat level simply by our weight, this body fat analyzer GBF-1406-B, with BIA (Bio-impedance Analysis) technology applied, is an accurate device that offers a quick and comfortable way to obtain your body fat level. Guidance and manufacturers declaration-electromagnetic emissions and Immunity Table 1 Guidance and manufacturers declaration - electromagnetic emissions Emissions test RF emissions CISPR 11 RF emissions CISPR 11 Harmonic emissions IEC 61000-3-2 Voltage fluctuations/
flicker emissions IEC 61000-3-3 Compliance Group 1 Class B Not application Not application 20 21 Appendix Appendix Table 2 Guidance and manufacturers declaration electromagnetic immunity IMMUNITY test IEC 60601-1-2 test level Compliance level Electrostatic discharge (ESD) IEC 61000-4-2 Electrical fast transient/burst IEC 61000-4-4 Surge IEC 61000-4-5 Voltage dips, short interruptions and voltage variations on power supply input lines IEC 61000-4-11 Power frequency magnetic field IEC 61000-4-8 Conduced RF IEC61000-4-6 Radiated RF IEC61000-4-3 8 kV contact 2 kV, 4 kV, 8 kV, 15 kV air 8 kV contact 2 kV, 4 kV, 8 kV, 15 kV air Not application Not application Not application Not application Not application Not application 30 A/m 50Hz/60Hz 30 A/m 50Hz/60Hz Not application Not application 10 V/m 80 MHz 2,7 GHz 80 % AM at 1 kHz 10 V/m 80 MHz 2,7 GHz 80 % AM at 1 kHz NOTE UT is the a.c. mains voltage prior to application of the test level. Table 3 Radiated RF IEC61000-4-3
(Test specifications for ENCLOSURE PORT IMMUNITY to RF wireless communications equipment) Guidance and manufacturers declaration - electromagnetic Immunity Test Frequency
(MHz) Band
(MHz) Service Modulation Modulation
(W) Distance
(m) IMMUNITY TEST LEVEL
(V/m) 380
-390 TETRA 400 380
-390 GMRS 460, FRS 460 704
-787 LTE Band 13,17 GSM 800/
900,TETRA 800,iDEN 820,CDMA 850,LTE Band 5 GSM 1800;
CDMA1900;
GSM 1900;
DECT;
LTE Band 1, 3,4, 25;
UMTS Bluetooth, WLAN, 802.11 b/g/n,RFID 2450,LTE Band 7 WLAN 802.11 a/n 800
-960 1700
-1990 2400
-2570 5100
-5800 Pulse modulation 18 Hz FM 5 kHz deviation 1 kHz sine Pulse modulation 217 Hz Pulse modulation 18 Hz Pulse modulation 217 Hz Pulse modulation 217 Hz Pulse modulation 217 Hz 1,8 2 0.3 0.3 0.2 0.3 27 28 9 2 2 2 0.3 28 0.3 28 0.3 28 0.2 0.3 9 385 450 710 745 780 810 870 930 1720 1845 1970 2450 5240 5240 5785 22 23
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2019-04-07 | 2402 ~ 2480 | DTS - Digital Transmission System | Original Equipment |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 | Effective |
2019-04-07
|
||||
1 | Applicant's complete, legal business name |
Zhongshan Transtek Electronics Co., Ltd
|
||||
1 | FCC Registration Number (FRN) |
0027069681
|
||||
1 | Physical Address |
No. 23,Jin'an Road, Minzhong
|
||||
1 |
Zhongshan, N/A
|
|||||
1 |
China
|
|||||
app s | TCB Information | |||||
1 | TCB Application Email Address |
C******@tuv-sud.cn
|
||||
1 | TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
||||
app s | FCC ID | |||||
1 | Grantee Code |
2AOJN
|
||||
1 | Equipment Product Code |
GBF-1406-B
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 | Name |
T**** D****
|
||||
1 | Telephone Number |
13823********
|
||||
1 | Fax Number |
07608********
|
||||
1 |
t******@lifesense.com
|
|||||
app s | Technical Contact | |||||
n/a | ||||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 | Equipment Class | DTS - Digital Transmission System | ||||
1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Body Fat Analyzer | ||||
1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 | Modular Equipment Type | Does not apply | ||||
1 | Purpose / Application is for | Original Equipment | ||||
1 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 | Grant Comments | Output power is peak conducted. | ||||
1 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 | Firm Name |
TUV SUD Cert & Testing (China) Co., Ltd.
|
||||
1 | Name |
H******** Z******
|
||||
1 | Telephone Number |
86 75********
|
||||
1 |
h******@tuv-sud.cn
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15C | 2402.00000000 | 2480.00000000 | 0.0004190 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC