FCC ID: 2BBZG-WS-S06 Wireless charge lamp

WS-S06D INSTALLATION INSTRUCTION WS-S06D V1.0 Double light source Reading Wall lamp Finsh Material Matte Black

Matte White Aluminum TECHNICAL CHARACTERISTICS Light source: LED Input: 100~277V 50/60Hz Output(W) :Spotlight 3W Background light 10W Warm Tips: p 1. Please read the instructions carefully before commencing assembly. 2. The installation of luminaire should be undertaken with utmost care and a qualified electrician should carry out the work to ensure compliance with any local wiring regulations. 3. Always ensure that the mains electrical supply is disconnected before installing luminaire. WS-S06D INSTALLATION INSTRUCTION 4. Ensure the light source is compatible with local voltage and follow any maximum wattage instructions shown on the product itself. 5. Live: Black Neutral: White Earth: Normally Green /Bare copper Option 1 1 2 WS-S06D 3 INSTALLATION INSTRUCTION 4 Option 2 WS-S06D 1 3 INSTALLATION INSTRUCTION 2 4 INSTALLATION INSTRUCTION WS-S06D 4 WS-S06D FCC Statement INSTALLATION INSTRUCTION Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

Lable:

Wireless charge Lamp FCC ID:2BBZG-WS-S06 Model: WS-S06 Input: AC 100-240V 50-60Hz Wireless Output15W Max

Zhongshan WS-lighting Company Limited Date: 2023/07/17 Product Model Number: WS-S06 FCC ID: 2BBZG-WS-S06 To whom it may concern, Re: Product Certification Representative Authorization Letter We authorize QAI Laboratories Ltd. 3980 North Fraser Way, Burnaby B.C. Canada V5J 5K5 to act on our behalf on all matters concerning the above named equipment. This shall include the following:

Testing Approval applications and procedures We declare that ORGANIZATION. is allowed to forward all information related to the approval project to the applied certification body and to the notification entities and to discuss any issues concerning the approval application. Any and all acts carried out by ORGANIZATION. on our behalf shall have the same effect as acts of our own. By:

Title: Mananger Email: ayson@ws-lighting.com Telephone: +86 180 2568 1168 On behalf of: Wayson Lin

Description

. DIMENSION(mm) 18*41-

6.8uH-

0..08*72P Edition Rev:A.0 Customer A B C D E S VERSOGO mm 43.50.5 411 180.5 5.30.5 32 351

. SCHEMATIC DIAGRAM Note:

1. Cross outgoing line;

2. Wrap 1-2Ts of high temperature adhesive tape with a width of 5mm(ref) at the outlet position;

3. The coil is affixed with a circular hard magnetic sheet with grooves, the size of the magnetic sheet is 43.5 0.5mm, the size of the inner hole is 5.3mm, and the thickness is 0.80.1mm;

4. The coil is equipped with a 15mm diameter hard magnetic sheet;

. Winding Specification NO. 1 TERMINAL S F WIRE 0.08*72P TURNS 11Ts Winding Direction CCW

. ELECTRICAL CHARACTERISTICS Temperature :2510 ,Relative Humidity :6520%

NO. ITEM TERMINAL SEPCFICATION 1 2 3 4 IND. IND. DCR Q S-F S-F S-F S-F TEST FREQUENCY TEST EQUIPMENTS 100KHz/1.0V LCZ METER 1062B 100KHz/1.0V LCZ METER 1062B 3.8uH10%

Individual coil 6.4uH10%

Add magnetic plate 43m 100KHz/1.0V LCZ METER 502B 75 100KHz/1.0V LCZ METER 502B PREPARED BY/DATE CHECKED BY/DATE

Zhongshan WS-lighting Company Limited Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 07-17-2023 FCC ID: 2BBZG-WS-S06 Ref. #1: Attestation Statements Part 2.911(d)(5)(i) Filing Zhongshan WS-lighting Company Limited certifies that the equipment for which authorization is sought is not covered equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Ref. #2: Attestation Statements Part 2.911(d)(5)(ii) Filing Zhongshan WS-lighting Company Limited certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing covered equipment. Applicant: Zhongshan WS-lighting Company Limited Address: No.156,Changan Nan Road, Henglan Town, Zhongshan City, Guangdong Province, China Contact Person: Wayson Lin Tel.: Manager Email: wayson@ws-lighting.com Sincerely, Signature:

Zhongshan WS-lighting Company Limited Model Different Model nameWireless charge lamp FCC ID: 2BBZG-WS-S06 Model number: WS-S06WS-S06xy (xand y are variables, xRepresents the serial number, It is represented by capital letters such as A, B, C . yRepresents the version number, It is represented by number such as 1, 2, 3 . ) All models the function, software and electric circuit are the same, except the model number. Name: Wayson Lin Date: 2023-07-17 Title: Manager Signature of applicant:

Zhongshan WS-lighting Company Limited Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Subject; Request for Confidentiality FCC ID: 2BBZG-WS-S06 To Whom It May Concern, Date: July 17, 2023 Pursuant to the provisions of the Commissions rules Title 47 Sections 0.457 and 0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Parts List Operational Description Tune-up Procedure In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR 2.803 and the importation rules in Title 47 CFR 2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s);

External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature:

Name: Wayson Lin Title: Manager

Zhongshan WS-lighting Company Limited AddressNo.156,Changan Nan Road, Henglan Town, Zhongshan City, Guangdong Province, China Date: 2023-07-19 Federal Communications Commission Authorization and Evaluation Division 1435 Oakland Mills Road Columbia, MD 21046 Ref: Attestation Statements Part 2.911(d)(7) Filing SUBJECT: FCC Application for FCC ID: 2BBZG-WS-S06 Zhongshan WS-lighting Company Limited certifies that, as of the date of the filing of the application, NETVUE,INC is our designated U.S. agent for service of process for the above referenced FCC ID. Zhongshan WS-lighting Company Limited accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. NETVUE,INC accepts, as of the date of the filing of the application, the obligation of the designated U.S. agent for service of process for the above referenced FCC ID. Designated U.S. Agent Information:

Name: NETVUE,INC Address: 240 W WHITTIER BLVD STE A LA HABRA, CA 90631 FRN:0033559915 Contact Person: Qiang Feng Tel.: 1-626-5380386 Email: qiang.feng@netvue.com Sincerely, Signed on behalf of Signed on behalf of Zhongshan WS-lighting Company Limited NETVUE,INC Name: Wayson Lin Name: Qiang Feng Title: Manager Signature:

Title: Manager Signature:

Date: 2023-07-19 Date: 2023-07-19