FCC ID: 2BCBZ-HP3 Thermal printer

Product guidelines Thermal printer Packing list Product guidelines Thermal label printer Thermal label printer Product information USB cable Quick Start Guide Name: Thermal label printer Connection: Bluetooth Print type: Thermal print Battery capacity: 3.7 V/1000 mAh Paper bin capacity: 15 * 45mm Model: HP3 Print accuracy: 203DPI Charging interface: Type-c Product size: 81.3 mm in diameter and 37.3 mm in height Paper cutting method: Manual tearing paper Support consumables: continuous/gap paper (gap distance 10mm 1 Charging instructions 5V 1A input charge, it is recommended to use a mobile phone charger for charging;

Recommended after the rst use after the purchase please charge rst;

Long non-use interval of 3 months to charge once, so as to avoid long

-term natural loss of lithium batteries can not be charged. Recommended charging time: 2 hours Warning! This product is not sold with power adapter, if consumers use power adapter supply, they should buy supporting use. CCC certication and meet the requirements of the standard power adapter, adapter output specications should meet: 5V 1A Visual description Power Switch Key Open the round cover directly Type-c Charging port 2 Warning! This product is not sold with power adapter, if consumers use power adapter supply, they should buy supporting use. CCC certication and meet the requirements of the standard power adapter, adapter output specications should meet: 5V 1A Power indicator status light description LED Green light often bright: work Red light often bright: paper shortage, open cover Red light ashing: low power Standby: The Green Light is always on. Power o: The Green Light Flickers slowly; when it is full, the light goes out Paper roll installation Open the round cover directly Put the paper into the machine and expose it Close the lid Open the lid put the paper Closure Connect the print operation steps SupportIOS/Android system 1. Device Boot, long press the boot button, the indicator lights up after release; as follows:

3 Power indicator status light description 2. Download the APP, in the mobile APP store to search forXEasyLabel or scan the following two-dimensional code, download and install XEasyLabel APP, during the installation process, allow the application to obtain the relevant permissions of the mobile phone;

3. Connect the APP connection, and the printer will install the paper to boot. At the same time, the Bluetooth of the mobile phone will be turned on. Enter the APP and click the+ number in the upper right corner to search for the printer device and click the connection. After the connection is successful, the icon next to the model in the top left corner of the APP's home page lights up;

4 4. Template printing, according to the printer currently placed label Paper Type (continuous or gap label paper) , in the home page to choose the corresponding type (home, skin care, kitchen...) template, click on the template to modify the text or pattern, and then print;

5. Click on the middle icon at the bottom of the home page to print the new label. According to the label paper in the body, select the corresponding paper type Continuous or Gap to edit and print. Later, when you need to change the paper type, at the top of the self-edit page, click toggle (as shown) to switch betweenGap paper label orContinuous paper label, and then click the label Specication Option, after determining the type and size of the label loaded into the printer, select OK, and then enter the corresponding text or pattern in the text box, and then print;

6. Text settings, select the text input label, that is, the text appears at the edge of the dotted box, and at the bottom of the screen text settings options, you canInput text, select textFont, and the text of the Typesetting operation 5 3. Connect the APP connection, and the printer will install the paper to boot. At the same time, the Bluetooth of the mobile phone will be turned on. Enter the APP and click the+ number in the upper right corner to search for the printer device and click the connection. After the connection is successful, the icon next to the model in the top left corner of the APP's home page lights up;

Electronic information products toxic and harmful substances declaration A poisonous substance or element Plastic casing Circuit board Internal cable Batteries 5. Click on the middle icon at the bottom of the home page to print the new label. According to the label paper in the body, select the corresponding paper type Continuous or Gap to edit and print. Later, when you need to change the paper type, at the top of the self-edit page, click toggle (as shown) to switch betweenGap paper label orContinuous paper label, and then click the label Specication Option, after Aluminum (Pb) Mercury (GG) Cadmium (CD) Hexavalent chromium (Cr6) Polybrominated biphenyls (pbbs) determining the type and size of the label loaded into the printer, select Polybrominated diphenyl ethers (pbdes) OK, and then enter the corresponding text or pattern in the text box, and This form is prepared in accordance with SJ/11364 X then print;

Indicates that the content of the hazardous substance in all homogeneous materials of the component is below the limit specied in GB/T 25125-2011. Indicates that the content of the toxic substance in at least one homogeneous material exceeds the limit specied in GB/T 26125 -2011. 6 Electronic information products toxic and harmful substances declaration FCC STATEMENT :

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

This device may not cause harmful interference, and This device must accept any interference received, including interference that may cause undesired operation. Warning:

Changes or modications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. 7 If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. RF warning statement:

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction. 8 Product guidelines Packing list Charging instructions Power indicator status light description Product guidelines Thermal label printer Thermal label printer Product information USB cable Quick Start Guide Name: Thermal label printer Connection: Bluetooth Print type: Thermal print Battery capacity: 3.7 V/1000 mAh Paper bin capacity: 15 * 45mm Model: HP3 Print accuracy: 203DPI Charging interface: Type-c 5V 1A input charge, it is recommended to use a mobile phone charger for charging;

Recommended after the rst use after the purchase please charge rst;

Long non-use interval of 3 months to charge once, so as to avoid long

-term natural loss of lithium batteries can not be charged. Recommended charging time: 2 hours Warning! This product is not sold with power adapter, if consumers use power adapter supply, they should buy supporting use. CCC certication and meet the requirements of the standard power adapter, adapter output specications should meet: 5V 1A Visual description Thermal printer Product size: 81.3 mm in diameter and 37.3 mm in height Paper cutting method: Manual tearing paper Support consumables: continuous/gap paper (gap distance 10mm Power Switch Key Open the round cover directly Type-c Charging port 1 2 LED Green light often bright: work Red light often bright: paper shortage, open cover Red light ashing: low power Standby: The Green Light is always on. Power o: The Green Light Flickers slowly; when it is full, the light goes out Paper roll installation Open the round cover directly Put the paper into the machine and expose it Close the lid Open the lid put the paper Closure Connect the print operation steps SupportIOS/Android system 1. Device Boot, long press the boot button, the indicator lights up after release; as follows:

3 2. Download the APP, in the mobile APP store to search forXEasyLabel or scan the following two-dimensional code, download and install XEasyLabel APP, during the installation process, allow the application to obtain the relevant permissions of the mobile phone;

4. Template printing, according to the printer currently placed label Paper Type (continuous or gap label paper) , in the home page to choose the corresponding type (home, skin care, kitchen...) template, click on the template to modify the text or pattern, and then print;

3. Connect the APP connection, and the printer will install the paper to boot. At the same time, the Bluetooth of the mobile phone will be turned on. Enter the APP and click the+ number in the upper right corner to search for the printer device and click the connection. After the connection is successful, the icon next to the model in the top left corner of the APP's home page lights up;

5. Click on the middle icon at the bottom of the home page to print the new label. According to the label paper in the body, select the corresponding paper type Continuous or Gap to edit and print. Later, when you need to change the paper type, at the top of the self-edit page, click toggle (as shown) to switch betweenGap paper label orContinuous paper label, and then click the label Specication Option, after determining the type and size of the label loaded into the printer, select OK, and then enter the corresponding text or pattern in the text box, and then print;

6. Text settings, select the text input label, that is, the text appears at the edge of the dotted box, and at the bottom of the screen text settings options, you canInput text, select textFont, and the text of the Typesetting operation Electronic information products toxic and harmful substances declaration A poisonous substance or element Plastic casing Circuit board Internal cable Batteries X Aluminum (Pb) Mercury (GG) Cadmium (CD) Hexavalent chromium (Cr6) Polybrominated biphenyls (pbbs) Polybrominated diphenyl ethers (pbdes) This form is prepared in accordance with SJ/11364 Indicates that the content of the hazardous substance in all homogeneous materials of the component is below the limit specied in GB/T 25125-2011. Indicates that the content of the toxic substance in at least one homogeneous material exceeds the limit specied in GB/T 26125 -2011. FCC STATEMENT :

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

This device may not cause harmful interference, and This device must accept any interference received, including interference that may cause undesired operation. Warning:

Changes or modications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. RF warning statement:

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction. 4 5 6 7 8 Thank you for using it

Label Location On EUT Label Product Name: Thermal printer Model No.: HP3 FCC ID: 2BCBZ-HP3 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received, including interference that may cause undesired operation.

-Zhuhai Hengmao Electronic Technology

Co.,Ltd Federal Communications Authorization and Evaluation Equipment Authorization 7 435 Oakland Columbia, Branch Mills Road Commission Division MD 21046 U.S. Anation 8/11/23 Zhuhai Hengmao Electronic Technology Co.,Ltd acknowledges their consent for the following contact in the United located authorization is sought (FCC ID: 2BCBZ-HP3) States to act as their agent for service of process for the equipment for which Name and company of U.S. agent:

Linkwld LLC Physical U.S. address of agent:

1942 Broadway St. STE 314C, Boulder, CO, 80302, US FRN of U.S. agent: 0033625682 Email address of U.S. agent:

Timothy.linkwld@proton.me Linkwld LLC acknowledges their obligation to accept service of process on behalf of Zhuhai Hengmao Electronic Technology Co.,Ltd. Zhuhai Hengmao Electonic Technology Co.,Ltd with the FRN [0034073700) accepts its obligation to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administ ative orudicial proceeding involving the equipment, is later. whichever By signing this form, we confirm the above and that we are aware of the application requirements listed under 2.911 (d)(7). Sincerely

, ShiLei Signature

[Name]HOU

[Title]Manager

[Company]Zh uhai Hengmao Electronic Technology Co.,Ltd Signature

[Name of U.S. agent)

[Title

[Company of U.S. agent]Manager of U.S. agent]

Linkwld LLC Timothy Zhu provided The information An expiration the granting in this leuer date for this letter does not exist. TCB. is based on the referenced nlle parts of Title 47 ofeCJ:R as well as KDB 986446 DO L In case the U.S. agent changes, the grantee is obligated to notify the FCC within 30 days via 0 2

. L l

L

P

) 6

. rI 1

l

1 t

2

I u p e u

l I OO

- Zhuhai Hengmao Electronic Technology Co., Ltd -

Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 8/16/23 To whom it may concern:

We, [Zhuhai Hengmao Electronic Technology Co., Ltd], hereby certify that the equipment for which authorization is sought (FCC ID: [2BCBZ-HP3]) is not covered equipment prohibited from receiving an equipment authorization pursuant to 2.903 of the FCC rules. We also certify that, as of the date of the filing of the application, we are not identified on the Covered List (https://www.fcc.gov/supplychain/coveredlist) as an entity producing covered equipment. By signing this form, we confirm the above and that we are aware of the application requirements listed under 2.911(b) and (d)(5) and (6). Sincerely, 2 0 V

, U

) i i

d n a

) i

) 5

) d

1 1 9 2 _ u q E d e r e v o C

l e d o m

_ 2 6 Signature

[OLIVER PINNOCK Hou]

[Quality Supervisor]

[Zhuhai Hengmao Electronic Technology Co., Ltd]

The information provided in this letter is based on the referenced rule parts of Title 47 of the CFR as well as KDB 986446 D01.