FCC ID: 2ANSM-D300 Active Speaker

Swans D300 Active Speaker Manual https://swanspeakers.com https://www.facebook.com/SwansSpeakers/

Zhuhai HiVi Technology Co., Ltd. E-mail: sales@swanspeaker.com No.1, South Dongcheng Road, Liangang Industrial Zone, Zhuhai, Guangdong, P.R.China Due to the reasons in the change of design or others, product information contained here may not be in conformity with product itself. We reserve the right of no prior notice before change. Design: HiVi-Swans Warning IMPORTANT SAFETY INSTRUCTIONS WARNING To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. CAUTION DO NOT OPEN RISK OF ELECTRIC SHOCK The lightning flash is intended to alert you to the presence of uninsulated dangerous voltage within the products enclosure that may be of sufficient magnitude to constitute an electric shock to persons. The exclamation point is intended to alert you to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. Before connecting or using this apparatus, do read carefully all safety warning and instructions. Please keep this instruction for future reference. This device should be installed or set up in a position that ventilation can be assured. Never put the device in a place that air flow over the ventilation openings might be hindered, such as in a bookshelf or a drawer. This product should be operated only from the type of power source indicated on the back panel of the device. The power cord of this product should be restored in a place that is less possibly be walked on or get pierced, especially its plug, convenience receptacles and the point where power cord exit from the apparatus. Before cleaning this product, make sure the plug is disconnected from the outlet. Proceed with the cleaning in the way that this instruction recommends only. When this product is not in use for a long time, make sure to unplug the power cord from the AC outlet. If below problem happens, send this product to a qualified service personnel for repairing. A. Power cord or power plug is damaged. B. Objects have fallen or liquid has been spilled into this product. C. This product is exposed to rain or other liquid. D. This product functions abnormally or very poorly. E. This product has been dropped or has a damaged enclosure. Never to attempt to repair this product by yourself. Refer all servicing to a qualified servicing personnel. CAUTION To reduce the risk of electric shock, the power plug must be completely inserted into an AC outlet. This product does not contain any parts or components that can be repaired by users themselves. Do not open the enclosure, otherwise it may result in an electric shock. Refer all servicing to a qualified servicing personnel. When you unplug this product from AC outlet, do hold the power plug and pull. Do not pull the power cord. Do not overload AC outlets or the extension cord, as this can lead to risk of fire or electric shock. 1 Break-in Warning Break-in is the procedure which can enable the speakers to perform best acoustically. A period ranging from 48-100 hours of usage is recommended before both the amplifier and speaker drivers behave optimally. Alternatively, you can listen 2 or 3 hours every day at a medium volume, and the speakers will be broken-in one month or so. Maintenance a) b) c) d) e) a) Avoid magnetic disturbance. b) Do not place under the sunshine for a long time. c) Do not place in high temperature or moist environment for a long time. d) Do not touch the drivers with your hands. e) Avoid corrosive liquids and gases. Trouble Shooting 1. If there is problem with sound quality. a) Check if all the drivers are working. b Check that audio cables are firmly connected at both ends.

) 2. If there is no sound from either of the speakers:

a Check if the device is on and if a source is playing.

) b Check if the volume is not on minimum.

) c Check if there is broken or short circuit with the cable connecting speakers and audio

) source. 3. If there is no sound coming from one of the speakers:

a) Check the setting of the audio source. b) Check that all the audio cable are firmly connected at both ends. When repairing or replacement of parts is required, make sure the service technician has used the parts/components specified by the manufacturer or parts/components that have the same characteristics as the original parts/components. Unauthorized substitutions may result in risk of fire, electric shock or other hazards. POWER SOURCE Before connecting this product with AC outlet, do check and make sure the electric supply voltage is as same as it is marked on the rear panel of this product. WARNING: It's very dangerous to insert a power plug that has bare wire into an AC outlet. DECLARATION This product does not contain any parts or components that can be repaired by users themselves. If there is any malfunction, refer to this instruction or ask for repair by a qualified service technician. Do not try to repair by yourself, otherwise the manufacturer will not be responsible for any consequences resulted there from. FCC Warning This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE 1:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

-Reorient or relocate the receiving antenna.

-Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-Consult the dealer or an experienced radio/TV technician for help. NOTE 2:

Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment complies with the FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and any part of your body. 9 2 Unpacking & Schematic Diagram Please make sure all the following components are in the box. 1 2 3 8 9 11 13 15 3 4 5 6 7 10 12 14 16 x 1 x 1 x 1 x 1 POWER AUX BAL OPT BT COAX MUTE VOL VOL Model: HiVi RC16 Swans D300 Active Speaker Manual Design: HiVi-Swans Manual Specifications Model Series Swans D300 Active Speaker with DSP System Type 2-way 4th-order vented speaker system Drivers Configuration 6.5" woofer ; isodynamic ribbon tweeter Frequency Range 38Hz - 20kHz ( 3dB, free space) Audio Input Bluetooth/Optical/Coaxial/Balance

/Line Amplifier Output:

Tweeter 30Wx2 RMS, Woofer 120Wx2 RMS Total 300W RMS Active DSP crossover frequency 3.0kHz Bass tuning Treble tuning Separation 3dB 3dB

>87dB Signal-to-Noise

>102dB (A weighted) Finish Matte black front baffle with luxurious HDF wooden enclosure Dimensions(W XDXH

) 8.6"

x12.4"

x13.8"

Net Weight Master speaker 19.4 lbs, Slave speaker 15.4 lbs 8 Speaker Placement Unpacking & Schematic Diagram STAND / DESK WALL Slave speaker d>70cm Master speaker d>30cm 60cm< <d 100cm Slave speaker Master speaker Slave speaker Master speaker Stand mode speakers Desk mode speakers About the placement of stand mode speakers: When you need to put the speaker on a dedicated speaker stand, you should switch the selector switch of speaker's back panel to STAND mode. About the placement of desk mode speakers: When you need to put the speaker on the computer desk or TV bench , you should switch the selector switch of speaker's back panel to DESK mode. Active Speaker Model: Swans D300 Power: 120V~ 60Hz 200W Design: HiVi-Swans Zhuhai HiVi Technology Co., Ltd. FCC ID: 2ANSM-D300 Made in China NO.1, South Dongcheng Road, Liangang Industrial Zone, Zhuhai, Guangdong, P.R.China INPUT /

VOLUME BASS TREBLE STAND DESK CAUTION DO NOT OPEN RISK OF ELECTRIC SHOCK OPTICAL L R COAXIAL AUX R BAL L This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. ON OFF POWER 120V~ 60Hz 200W LEFT OUT LEFT IN 19 20 24 23 27 17 18 21 22 25 26 28 1. Isodynamic Ribbon Tweeter 2. Woofer 3. Receiver / Indicator Light 4. Power Cable 5. Dual RCA to 3.5mm Audio Cable 6. Optical Connecting Cable 7. Speaker Connecting Cable 8. Power 9. AUX Input (Light Blue Light) 10. Balance Input (Yellow Light) 11. Optical Input (White Light) 12. Bluetooth Input (Blue Light) 13. Coaxial Input(Purple Light) 14. Mute (Red Light) 15. Volume Down 16. Volume Up 17. Input/Volume Control: Turn clockwise to increase the volume. Press repeatedly to cycle through the available modes

(AUX, Bluetooth) 18. Bass Control: 3dB; clockwise +3dB, counterclockwise -3dB 19. Treble Control: 3dB; clockwise +3dB, counterclockwise -3dB 20. STAND/DESK Mode 21. Optical Interface 22. Coaxial Interface 23. AUX Interface 24. Balance Interface 25. Power Switch 26. Power Socket 27. Speaker Out 28. Speaker In 7 4 Speaker Connection Bluetooth Connection mode via the remote control Bluetooth Indicator light should flash blue. Choose Swans D300 on your phone. Steady blue or press Input Volume control on the back Select panel. light indicates successful Bluetooth connection.

Active Speaker Model: Swans D300 Power: 120V~ 60Hz 200W Design: HiVi-Swans Zhuhai HiVi Technology Co., Ltd. FCC ID: 2ANSM-D300 Made in China NO.1, South Dongcheng Road, Liangang Industrial Zone, Zhuhai, Guangdong, P

.R.China INPUT /

VOLUME BASS TREBLE STAND DESK CAUTION DO NOT OPEN RISK OF ELECTRIC SHOCK OPTICAL L R COAXIAL AUX R BAL L This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. ON OFF POWER 120V~ 60Hz 200W LEFT OUT Speaker Out a b S peaker In LEFT IN Master Speaker Slave Speaker 120V~ 60Hz Active Speaker Model: Swans D300 Power: 120V~ 60Hz 200W Design: HiVi-Swans Zhuhai HiVi Technology Co., Ltd. FCC ID: 2ANSM-D300 Made in China NO.1, South Dongcheng Road, Liangang Industrial Zone, Zhuhai, Guangdong, P.R.China Mobile Phone INPUT /

VOLUME BASS TREBLE STAND DESK d c CAUTION DO NOT OPEN RISK OF ELECTRIC SHOCK Ipad CD Player DVD Player TV OPTICAL L R COAXIAL AUX R BAL L This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. ON OFF e CD Player Computer Active Speaker Model: Swans D300 Power: 120V~ 60Hz 200W Design: HiVi-Swans Zhuhai HiVi Technology Co., Ltd. FCC ID: 2ANSM-D300 Made in China NO.1, South Dongcheng Road, Liangang Industrial Zone, Zhuhai, Guangdong, P.R.China INPUT /

VOLUME STAND DESK INPUT /

VOLUME BASS TREBLE CAUTION DO NOT OPEN RISK OF ELECTRIC SHOCK OPTICAL L R COAXIAL AUX R BAL L This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. ON OFF POWER 120V~ 60Hz 200W LEFT OUT POWER AUX BAL OPT BT COAX MUTE VOL VOL AUX BAL OPT BT COAX MUTE POWER 120V~ 60Hz 200W LEFT OUT Model: HiVi RC16 TV a) Connection between speakers. b) Speaker connection with power. c) Optical connection with CD Player/DVD Player/TV. d) Speaker connection with computers, TV and tablets etc e) Balance connection with CD Player. 5 6

Reference No.: WTX23X11252842W001 Page 1 of 14 ANNEX EXHIBIT 1 - PRODUCT LABELING Proposed FCC ID Label Format Specifications: The label shall be securely affixed to a permanently attached part of the device, in a location where it is visible or easily accessible to the user, and shall not be readily detachable. The label shall be sufficiently durable to remain fully legible and intact on the device in all normal conditions of use throughout the devices expected lifetime. Proposed Label Location on EUT FCC ID Label Location Waltek Testing Group (Shenzhen) Co., Ltd. Http://www.waltek.com.cn

Zhuhai HiVi Technology Co., Ltd. NO.1, South Dongcheng Road, Liangang Industrial Zone, Zhuhai, Guangdong, China Date: 2024-01-24 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Ref:

Attestation Statements Part 2.911(d) (5) (i) Filing SUBJECT: FCC Application for FCC ID: 2ANSM-D300 To Whom It May Concern:

Zhuhai HiVi Technology Co., Ltd. certifies that the equipment for which authorization is sought is not covered equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Sincerely, Signatory

[Jade Zhou, system specialist]

Zhuhai HiVi Technology Co., Ltd. NO.1, South Dongcheng Road, Liangang Industrial Zone, Zhuhai, Guangdong, China Date: 2024-01-24 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Ref:

Attestation Statements Part 2.911(d) (5) (ii) Filing SUBJECT: FCC Application for FCC ID: 2ANSM-D300 To Whom It May Concern:

Zhuhai HiVi Technology Co., Ltd. certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing covered equipment. Sincerely, Signatory

[Jade Zhou, system specialist]

Zhuhai HiVi Technology Co., Ltd. NO.1, South Dongcheng Road, Liangang Industrial Zone, Zhuhai, Guangdong, China Date: 2024-01-24 FEDERAL COMMUNICATIONS COMMISSION AUTHORIZATION AND EVALUATION DIVISION 7435 OAKLAND MILLS ROAD COLUMBIA, MD 21046 SUBJECT: FCC Application for FCC ID: 2ANSM-D300 Confidentiality Request To whom it may concern, Pursuant to the provisions of the Commissions rules Title 47 Sections 0.457 and 0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. Block Diagram Operational Description Schematics Parts List Tune-Up Information Security Information Software Defined Radio (SDR) Information The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR 2.803 and the importation rules in Title 47 CFR 2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s);

External Photos Internal Photos Test Setup Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. or For 180 days pursuant to KDB 726920 D01. The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, Signatory

[Jade Zhou, system specialist]

Zhuhai HiVi Technology Co., Ltd. NO.1, South Dongcheng Road, Liangang Industrial Zone, Zhuhai, Guangdong, China Date: 2024-01-24 FEDERAL COMMUNICATIONS COMMISSION AUTHORIZATION AND EVALUATION DIVISION 7435 OAKLAND MILLS ROAD COLUMBIA, MD 21046 SUBJECT: FCCID: 2ANSM-D300 Model Declaration Letter Dear Regulatory Authority, Model(s): HiVi-Swans D300, HiVi D300, SWAN D300, D300 are same to the model Swans D300, these models are same PCB Layout, Schematics, BOM. Only for different model name for different market require. Sincerely, Signatory

[Jade Zhou, system specialist]

Zhuhai HiVi Technology Co., Ltd. NO.1, South Dongcheng Road, Liangang Industrial Zone, Zhuhai, Guangdong, China Date: 2024-01-24 FEDERAL COMMUNICATIONS COMMISSION AUTHORIZATION AND EVALUATION DIVISION 7435 OAKLAND MILLS ROAD COLUMBIA, MD 21046 SUBJECT: FCC Application for FCC ID: 2ANSM-D300 POWER OF ATTORNEY To Whom It May Concern:

We, the undersigned, hereby authorize Waltek Testing Group (Shenzhen) Co., Ltd. Jandy So on our behalf, to apply to the Federal Communications Commission on our equipment. Any and all acts carried out by Waltek Testing Group (Shenzhen) Co., Ltd. Jandy So on our behalf shall have the same effect as acts of our own. This is to advise that we are in full compliance with the Anti-Drug Abuse Act. We, Zhuhai HiVi Technology Co., Ltd. are not subject to a denial of federal benefits pursuant to Section 5301 of the Anti-Drug Act of 1988, 21 USC853a, and no party to the application is subject to a denial of federal benefits pursuant to that section. Sincerely, Signatory

[Jade Zhou, system specialist]

Zhuhai HiVi Technology Co., Ltd. NO.1, South Dongcheng Road, Liangang Industrial Zone, Zhuhai, Guangdong, China Date: 2024-01-24 FEDERAL COMMUNICATIONS COMMISSION AUTHORIZATION AND EVALUATION DIVISION 7435 OAKLAND MILLS ROAD COLUMBIA, MD 21046 USA Ref: Attestation Statements Part 2.911(d) (7) Filing Grantee Code: 2ANSM Applicant FRN: 0026843680 Zhuhai HiVi Technology Co., Ltd. certifies that, as of the date of the filing of the application, HiVi Acoustics Inc. is our designated U.S. agent for service of process for the above referenced Grantee Code. Zhuhai HiVi Technology Co., Ltd. accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. Zhuhai HiVi Technology Co., Ltd. accepts, as of the date of the filing of the application, the obligation of the designated U.S. agent for service of process for the above referenced Grantee Code. Designated U.S. Agent Information:

Name: HiVi Acoustics Inc. U.S. Agent FRN: 0033472549 Address: 1835 Westhaven Road, San Marino, CA 91108, United States Contact Person: Vemi Liang Tel.: (626) 318-8190 Email: vemi.liang@swanspeakers.com Sincerely, Signed on behalf of Zhuhai HiVi Technology Signed on behalf of HiVi Acoustics Inc. Co., Ltd. Name: Jade Zhou Name: Vemi Liang Title: system specialist Title: Director Date: 2024-01-24 Date: 2024-01-24