FCC ID: 2A7T4-HP-7200-APP CLAMP MULTIMETER

6000 COUNTS WITH APP DC/AC TRUE-RMS CLAMP MULTIMETER OPERATION MANUAL 1. Overview The auto range clamp multimeter is a portable and stable performance. Using 6000 counts digit LCD monitor with character 16mm high. With overall circuitry design centering on large-scale IC A/D converters in conjunction and over-load protection circuit, the meters give excellent performance and exquisite making as a handy utility instrument. The meter can be connected with mobile phone by Bluetooth, and display on phone by APP, you can remote monitoring the measurement condition, the distance control is 1015m. The meters can be used to measure DC & AC voltage, DC & AC current, resistance, capacitor, frequency, duty cycle, temperature, Non Contact AC Voltage (NCV) detection, positive diode voltage fall and audible continuity. 2. Panel Layout range, change to 1. Clamp jaws: Opens 26mm to enclose conductor. 2. NCV detection area (bottom). 3. Lamp light: Press the HOLD key over 2 seconds to light the lamp light, it will light up too when the built-in buzzer sounds. 4. Jaw-opening handle: Opens and closes the jaws. 5. Rotary Switch: Use this switch to select functions and ranges. 6. HOLD key: Press the HOLD key to lock display value, and the DH sign will appear on the display, press it again to exit. Press HOLD key more than 2 seconds, the back light and the lamp light will light up, press it more than 2 seconds again, the back light and the lamp light will light off.

" range, press the key to choose 7. SEL key: This key work on the "

resistance, continuity, diode or capacitance test, on the voltage or current range, change to DC or AC, on the 8. MAX/MIN key: Press the MAX/MIN key to lock MAX or MIN value, and the MAX or MIN sign will appear on the display, press it over 2 seconds to exit. 9. REL Key: Press the REL key, the meter enters relative measuring mode, is displayed on the LCD and the present reading becomes the reference value and displayed on the display. Relative measurement REL=measurement value-Reference value. Press it again to exit. 10. Hz/Duty Key: On ACV/ACA or Hz range, press the Hz% key, you can choose the Frequency or Duty Cycle measurement. 11. LCD display: 6000 counts digit, full function symbol display. 12. COM: COM and Temperature - Input Jack

: V/

13. V 3. Safety Information 3-1 The meter is designed according to IEC-1010 concerning electronic measuring instruments with an over-voltage category 600V (CAT ) and pollution 2. 3-2 Follow all safety and operating instructions to ensure that the meter is used safely and is kept in good operating condition. 3-3 safety symbols:

/Hz/T+ Input Jack

. test or Hz

Important safety information, refer to the operating manual. Dangerous voltage may be presence. Double insulation (protection Class II) 4. Special Cautions for Operation 4-1 The meters can be safe only according to standard procedures when used in conjunctions with the supplied test leads. To replace damaged test leads with only the same model or same electric specifications. 4-2 To avid risk of electric shock, do not use the meters before the cover is in place. 4-3 The range switch should be right position for the testing. 4-4 To avoid electric shock and damaging the instruments, the input signals are forbidden to exceed the specified limits. 4-5 When measuring TV set or switched power, attention should be paid to the possible pulses that may bring destruction to the circuit. 4-6 Range switch position is forbidden to be changed at random during measurement. 4-7 Take caution against shock in the course of measuring voltage higher than DC 60V & AC 30V. 4-8 Before opening the cover of the battery cabinet to replace batteries. disconnect the test leads from any external circuit, set the selector switch to

"OFF" position. 4-9 Keep the fingers after the protection ring when measuring through the instrument lead. 4-10 Keep the fingers after the protection ring when measuring through the clamp. 4-11 After operation is finished, set function switch at OFF to save battery power. 4-12 If the meter is without usage for long time, take out battery to avoid damage by battery leakage. 5. GENERAL SPECIFICATIONS 5-1 Max Voltage between input terminal and Earth Ground:

to 28 CAT 600V or CAT 300V displayed. to 40 to 50

(relative humidity <85%)

(relative humidity <85%) 5-2 Over-range Indication: display OL for the significant digit. 5-3 Automatic display of negative polarity - . 5-4 Low Battery Indication:

5-5 Max LCD display: 6000 counts digit. 5-6 Auto range control 5-7 Clamp opening size: 26mm. 5-8 Power supply: 1.5V2 AAA R03P battery 5-9 Operating Temp.: 0 5-10 Storage Temp.:-10 5-11 Guaranteed precision Temp.: 235 5-12 Dimension: 207(H)75(W)37(D)mm. 5-13 Weight: Approx. 280g (including battery). 6. Testing Specifications Accuracy is specified for a period of year after calibration and at 18 to 82

(64 6-1 DC Voltage Range 600mV 6V 60V 600V Resolution 0.1mV 1mV 10mV 100mV

) with relative humidity to 70%.

(0.8% of rdg + 2 digits)

(0.5% of rdg + 2 digits)

(relative humidity <70%) Accuracy

-- Impedance: 10M, More than 100M on 600mV range

-- Overload protection: 600V DC or AC rms 6-2 AC Voltage (True RMS) Resolution 1mV 10mV 100mV Range 6V 60V 600V Accuracy

(1.0% of rdg + 3 digits)

(1.5% of rdg + 3 digits) Accuracy

(2.5% of rdg + 10 digits)

(3.0% of rdg + 10 digits) Accuracy

(2.5% of rdg + 10 digits)

(3.0% of rdg + 10 digits) Accuracy

(1.0% of rdg + 3 digits)

(1.0% of rdg + 2 digits)

(1.5% of rdg + 3 digits)

-- Impedance: 10M

-- Overload protection: 600V DC or AC rms

-- Frequency Range: 40 to 2kHz 6-3 DC Current Range 60A 400A Resolution 10mA 100mA

-- Overload protection: 400A DC or AC rms 6-4 AC Current (True RMS) Resolution 10mA 100mA Range 60A 400A

-- Overload protection: 400A DC or AC rms

-- Frequency Range: 40 to 100Hz 6-5 Resistance Range 600 6k 60k 600k 6M 60M Resolution 0.1 1 10 100 1k 10k

-- Overload protection: 250V DC or AC rms 6-6 Capacitance Range 6nF 60nF Fn006 6F 60F 600F Fm6 60mF Accuracy

-- Overload protection: 250V DC or AC rms 6-7 Frequency Range 9.999Hz 99.99Hz 999.9Hz zHk999.9 99.99kHz 999.9kHz 9.999MHz Accuracy

(5.0% of rdg + 10 digits)

(3.0% of rdg + 10 digits)

(5.0% of rdg + 10 digits)

(10.0% of rdg + 20 digits)

(0.1% of rdg + 5 digits) Resolution 1pF 10pF Fp001 1nF 10nF 100nF F1 10F Resolution 0.001Hz 0.01Hz 0.1Hz zH1 10Hz 100Hz 1kHz

-- Sensitivity: sine wave 0.6V rms (9.999MHz: 1.5V rms)

-- Overload protection: 250V DC or AC rms 6-8 Duty cycle 0.1%99.9%: ( 2.0% of rdg + 2 digits ), Frequency lower than 10kHz

-- Sensitivity: sine wave 0.6V rms

-- Overload protection: 250V DC or AC rms 6-9 Temperature Range Accuracy

-20~150 150~1000

-4~302 302~1832

-- NiCr-NiSi K-type sensor

-- Overload protection: 250V DC or AC rms 6-10 Diode and Audible continuity test

( 3+ 1digit )

( 3% of rdg + 2digits )

( 5+ 2digits )

( 3% of rdg + 3digits ) Range Description Display read approximately forward voltage of diode Resolution 1 1 Test Condition Forward DC current approx. 1.5mA Reversed DC voltage approx. 4V Open circuit voltage approx. 2V Built-in buzzer sounds and the lamp light will light up if resistance is less than 50 symbol will appear on the LCD display and the battery need to changed. besides the input jack which shows that the input Overload protection: 250V DC or AC rms 6-11 Non Contact AC Voltage (NCV) detection Test voltage range: 90V1000V AC rms The lamp light will light up together with sound. 7. OPERATING INSTRUCTIONS 7-1 Attention before operation 7-1-1 Check battery. When the battery voltage drop below proper operation range, the 7-1-2 Pay attention to the voltage or current should be within the specified value. 7-1-3 The range switch should be positioned to desired range for measurement before operation. 7-2 Measuring DC & AC Voltage 7-2-1 Connect the black test lead to COM jack and the red to V 7-2-2 Set the rotary switch at the desired V for testing DC voltage, if you want to test AC voltage, push SEL button switch. 7-2-3 Connect test leads across the source or load under measurement. 7-2-4 You can get reading from LCD. The polarity of the red lead connection will be indicated along with the DC voltage value. NOTE:

1. higher voltage, but it may destroy the inner circuit or pose a shock. 2. Be cautious against shock when measuring high Voltage. 7-3 Measuring DC & AC Current 7-3-1 Set the rotary switch at the desired 60A or 400A range position, it shows symbol for testing DC current, if you want to test AC current, push SEL button switch. 7-3-2 Zero the reading by pressing REL key for a reading of zero on the display. 7-3-3 Disconnect the test leads from the Meter. 7-3-4 Clamp the Jaws around the one conductor to be measured. Center the means you cant input the voltage more than 600V, its possible to show range position, it shows symbol jack. conductor within the Jaw using the Centering Marks as guides. 7-3-5 You can get reading from LCD. The arrow in the Jaw indicates the direction of positive current flow (positive to negative). NOTE:

1. When the value scale to be measured is unknown beforehand, set the range selector at the highest position. 2. When only OL is displayed, it indicates over-range situation and the higher range has to be selected. 7-4 Measuring Resistance 7-4-1 Connect the black test lead to COM jack and the red to V 7-4-2 Set the rotary switch at the desired 7-4-3 Connect test leads across the resistance under measurement. 7-4-4 You can get reading from LCD. NOTE: Max. input overload: 250V rms10sec 1. For measuring resistance above 1M, the mete may take a few seconds to get stable reading. 2. When the input is not connected, i.e. at open circuit, the figure OL will be displayed for the over-range condition. 3. When checking in-circuit resistance, be sure the circuit under test has all power removed and that all capacitors have been discharged fully. 7-5 Measuring Capacitance 7-5-1 Connect the black test lead to COM jack and the red to V 7-5-2 Set the rotary switch at the desired range position, push SEL range position. jack. jack. to choose Capacitance measurement. 7-5-3 Connect test leads across the capacitance under measurement. 7-5-4 You can get reading from LCD. NOTE: Max. input overload: 250V rms10sec 1. Capacitors should be discharged before being tested. 2. When testing large capacitance, it will take longer time before the final indication (For 600uF~60mF range, it will take about 10 seconds). 3. When testing small capacitance (1uF), to assure the measurement accuracy, first press "REL", then go on measuring. 7-6 Measuring Frequency & Duty cycle 7-6-1 Connect the black test lead to COM jack and the red to V 7-6-2 Set the rotary switch at the desired Hz range position. 7-6-3 Push Hz% key to choose Frequency or Duty cycle test. 7-6-3 Connect the probe across the source or load under measurement. 7-6-4 You can get reading from LCD. 7-7 Measuring Temperature 7-7-1 Connect the black banana plug of the sensor to COM jack and the red jack. 7-7-2 Set the rotary switch at the desired range position, push SEL to banana plug to the V jack. choose or measurement.

(300 7-7-3 Put the sensor probe into the temperature field under measurement. 7-7-4 You can get reading from LCD. NOTE:

1. The accessory of the meter WRNM-010 type contact thermocouple limit temperature is 250 shortly), please use special probe for test higher temperature. 2. Please don't change the thermocouple at will, otherwise we can't guarantee to measure accuracy. 3. Please dont importing the voltage in the temperature function. 7-8 Diode & Audible continuity Testing 7-8-1 Connect the black test lead to COM jack and the red to V 7-8-2 Set the rotary switch at the range position, push SEL to jack. choose Diode or Audible continuity measurement. 7-8-3 On diode range, connect the test leads across the diode under measurement, display shows the approx. forward voltage of this diode. 7-8-4 On Audible continuity range, connect the test leads to two point of circuit, if the resistance is lower than approx. 50, the lamp light will light up together with sound. NOTE: Make sure the power is cut off and all capacitors need to be discharged under this measurement. 7-9 Non Contact AC Voltage detection 7-9-1 Set the rotary switch at the desired NCV range position. 7-9-2 Hold the meter so that the bottom of the maters clamp jaws right is vertically and horizontally centered and contacting the conductor, when the live voltage 90V AC rms, the lamp light will light up together with sound. NOTE:

1. Even without LED indication, the voltage may still exist. Do not rely on non-contact voltage detector to determine the presence of voltage wire. Detection operation may be subject to socket design, insulation thickness and different type and other factors. 2. When the meter input terminals presence voltage, due to the influence of presence voltage, voltage sensing indicator may also be bright. 3. Keep the meter away from electrical noise sources during the tests, i.e., florescent lights, dimmable lights, motors, etc.. These sources can trigger Non-Contact AC Voltage detection function and invalidate the test. 7-10 Connect to mobile phone APP The meter has serial data output function. It can be connected with mobile phone by Bluetooth, so the measured data can be recorded, analyzed, and processed by mobile phone APP. Before use this function, you need install the mobile phone APP AiLink by scan the QR code. It includes the AiLink APP packages for download and detailed installation and usage instructions. The website link is:

http://www.elinkthings.com/cn/help-detail-158.html. NOTE: The mobile phone APP can be installed in iphone 4S iOS 7.0 or android 4.30 system and up. 8. Battery replacement 8-1 When the battery voltage drop below proper operation range the "

will appear on the LCD display and the battery need to changed.

" symbol 8-2 Before changing the battery, set the selector switch to OFF position and remove the test leads from the terminals. Open the cover of the battery cabinet by a screwdriver. 8-3 Replace the old battery with the same type battery (AAA R03P 1.5V2). 8-4 Close the cover of the battery cabinet and fasten the screw. 9. Maintenance 9-1 You must replace the test leads if the lead is exposed, and should adopt the leads with the same specifications as origin. 9-2 Do not use the meter before the back cover is properly closed and screw secured. Upon any abnormality, stop operation immediately and send the meter for maintenance. 9-3 When take current measurement, keep the cable at the center of the clamp will get more accurate test result. 9-4 Repairs or servicing not covered in this manual should only by qualified personal. 9-5 Periodically wipe the case with a dry cloth and detergent. Do not use abrasives or solvents on this instruments. 9-6 Please take out the battery when not using for a long time. 10. Accessories

[1] Test Leads: electric rating 600V 10A

[2] K type thermocouple sensor probe

[3] Operators Manual Above picture and content just for your reference. Please be subject to the actual products if anything different or updated. Please pardon for not informing in advance. AILink User Manual Summary AiLink is a comprehensive intelligent hardware management platform. Through AiLink App, you can complete the convenient between mobile phones and intelligent hardware,achieve the interconnection and intercommunication between devices and users. AILink supports multiple types of devices, such as smart health, smart security, smart electricians. APP download and installation Scan the below QR code to download directly, or search for

"AILink" in the APP Store, download and install the "AILink". Account registration 1 Set up an account: select the method of registration: mobile phone or email, enter the content, this account is used for login 2 Verify the account: Click the "Send" button to send a verification code to the registered account to verify the accuracy of the account. The verification code is sent in 120s. If you have not received it over time, please click Send again 3 Set the password: In order to ensure the security of the account, the password must be composed of 6-16 digits +

grapheme 4 All settings are completed, click on register to complete the registration Login 1 Account + password login: Set up an account and password through registration, and log in with the set account + password 2 Third-party application authorized login: currently supports WeChat and facebook authorized login. Forgot Password When the user forgets the password, he can reset the password through this setting 1 Enter the account that needs to retrieve the password 2 Send verification code: Click the "Send" button to send the verification code to the entered account, verify the account, the sending time of the verification code is 120s, if you didnt received that in time, please click send again 3 Reset password: the setting method is the same as that account registration 4 All settings are completed, click "Submit Reset" to complete, you can use the new password to log in to the APP Supplement master account information Due to the diversity of supported devices, it is necessary to set an head portrait, nickname, birthday, and gender when creating a user. The supplementary information is used for data calculation of some devices and analysis of measurement data Bonding/connecting devices There are two ways to bond devices: nearby devices, manually add 1 Nearby devices: Open the device page to automatically search for nearby matching devices, and click the searched device to automatically bond 2 Manually add: select the device that needs to be added and operate according to the operating instructions to add 1) click the device image to change the product name. sampling rate. 5Click the "set up" button, view the firmware version or set the 2The Maximum or Minimum value and corresponding time will display on the mobile phone APP, and the average value in a period of time from start measurement will display too. 3Press the "start" key to start recording the measurement data, and press the "stop" key to stop this recording. Press the "reset"

key to reset and stop the measurement, the old data will be cleared and the recording will start again. 4Click the "data" button to view the historical record time and historical record data, and press the button in the upper right corner to share or download the data. Feedback With any comments or suggestions, you can tell us through this function to help us improve the product and make the product better. After receiving the feedback, we will deal with it as soon as possible. The problem is described in detail as much as possible, and the corresponding picture can be added to the APP problem. , In order to supplement the description more clearly, the programmer can reproduce the problem and solve the problem faster. CONTACT US For any problem or concern, welcome to email us for prompt response. AFTERSALES1010@HOTMAIL.COM P.S. To make sure you can receive immediate solution and your requests processed quickly, please email us with these information:

1. Order Number 2. Platform of Your Purchase 3. Full Model Number 4. Description of the Problem(Attaching videos or photos can help us troubleshoot the problems even faster) This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

-- Reorient or relocate the receiving antenna.

-- Increase the separation between the equipment and receiver.

-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-- Consult the dealer or an experienced radio/TV technician for help. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction. FCC ID: 2A7T4-HP-7200-APP

Page 1 of 1 FCC ID: 2A7T4-HP-7200-APP LABEL AND LOCATION CLAMP MULTIMETER Model: HP-7200-APP FCC ID: 2A7T4-HP-7200-APP

(Size: L1.5cm x 1.0cm) Label Location Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: webmaster@lcs-cert.com | Web: www.lcs-cert.com Scan code to check authenticity

CONFIDENTIALITY REQUEST for Certification Service in USA Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21046 Date:<2022-7-27>

Pursuant to Paragraphs 0.457 and 0.459 of the Commission's Rules (47 C.F.R.) and Section 552(b)(4) of the Freedom of Information Act, we requests confidentiality for the following products:

FCC ID Model name 2A7T4-HP-7200-APP HP-7200-APP For the product stated above, we request that the following information be held confidential;

Long-Term Short-Term Short-Term Exhibits Confidentiality Confidentiality Confidentiality Days External Photos Internal Photos Block Diagram xX Schematics Xx Test Setup Photos Users Manual Parts List Tune Up Operational Descriptions Xl The long-term confidentiality exhibits contain our trade secrets and proprietary information that could be of benefit to our competitors. The short-term confidentiality on the basis of ensuring that business sensitive information remains confidential until the actual marketing of our new device. If you have any questions, please feel free to contact me at the address shown below. Sincerely, You _ Name/Title: Wei Bai/ Manager Company: ZhuHai JiDa HuaPu Instrument Co.,Ltd Address: 3/F,Build 4,Qinghua Science Park Building, ,No.101 Universitiy Road,Tangjiawan Village Zhuhai Guangdong Phone: 86-756-3374032 Fax: 86-756-3374032 E-Mail: vivian@holdpeak.com

ZhuHai JiDa HuaPu Instrument Co.,Ltd 3/F,Build 4,Qinghua Science Park Building, ,No.101 Universitiy Road, Tangjiawan Village Zhuhai Guangdong Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 2022-7-27 To whom it may concern:

We, the undersigned, hereby authorize Eurofins Product Service GmbH to act on our behalf in all matters relating to applications for equipment authorization FCC ID: 2A7T4-HP-7200-APP including the signing of all documents related to these matters. Any and all acts carried out by Eurofins Product Service GmbH on our behalf shall have the same effect as acts of our own. By signing this application form, we agree to Eurofins current valid General Terms and Conditions

(AGB),Testing and Certification Regulations (PZO) which can be viewed on following website www.eurofins.de/ee or retrieved on request. We also hereby certify that no party to this application is subject to a denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Sincerely, You _ Name/Title: Wei Bai/Manager Company: ZhuHai JiDa HuaPu Instrument Co.,Ltd Address: 3/F,Build 4,Qinghua Science Park Building, ,No.101 Universitiy Road,Tangjiawan Village Zhuhai Guangdong Phone: 86-756-3374032 Fax: 86-756-3374032 E-Mail: vivian@holdpeak.com