User Guide Pantum M6550 Series Monochrome Laser MFP It is recommended to carefully read this Guide before using the printer Preface Welcome to the Pantum series products!
We heartily appreciate your using of Pantum series products!
To protect your vital interests, please carefully read the following statements. Legal Notice Trademark Pantum and Pantum logos are registered trademarks of Zhuhai Seine Technology Co., Ltd. Microsoft, Windows, Windows Server and Windows Vista are trademarks registered by Microsoft Corporation in the United States or other countries/regions. The ownership to the names of the software in this User Guide belongs to their respective companies in accordance with corresponding license agreement, and they are referred for instructions only. All other product and brand names herein may be the registered trademarks, trademarks or service marks of their respective owners, and they are referred for instructions only. Copyright The copyright of this User Guide is owned by Zhuhai Seine Technology Co., Ltd. It is prohibited to copy, translate, modify and transmit this User Guide by any means or in any form without the prior written consent of Zhuhai Seine Technology Co., Ltd. Version: V1.0 Disclaimer For a better user experience, Zhuhai Seine Technology Co., Ltd. reserves the right to make changes to the User Guide. The information contained herein is subject to change without notice. Users are responsible for any damages arising from failing to follow this User Guide. Meanwhile, except the express warranty made in the product maintenance manual or service commitment, Zhuhai Seine Technology Co., Ltd. does not make any express or implied warranty or guarantee to this User Guide (including composing or words). Using this product to copy, print, scan certain documents or images or make other forms of operations may be prohibited by the local laws. If you are uncertain about the legality of using this product for certain documents or images, you should consult your legal advisor in advance. The product can only be used safely in the non-tropical areas at an altitude no higher than 2000 meters. I Safety Precautions Laser Safety The laser radiation is harmful to the human body. Since laser components are completely sealed in the printer, laser radiation will not leak. To avoid laser radiation, please do not randomly disassemble the printer!
The printer follows the provisions of Class 1 laser products under CFR standard. The printer has a Class III b laser diode, which has no laser radiation leakage among laser components. The following label is attached to the laser components inside the printer:
Reclamation and recycling To protect the environment, our corporation has already established the system of reclamation
recovery at www.pantum.com. Safety Warning Please note the following safety warnings before using the printer:
Warning There is high-voltage electrode inside the printer. Before cleaning the printer, make sure the power is turned off!
Plugging and unplugging the power cord plug with a wet hand can result in an electric shock. The fuser unit is hot when and after printing. Touching the fuser unit (the shaded area as shown) may cause burns!
The fuser unit is attached with a high temperature warning label. Please do not remove or damage this label. II
26. This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired operation of the device. 27. IC Radiation Exposure Statement:
This equipment complies with Canada and FCC radiation exposure limits set forth for uncontrolled environments. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. 28. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
connected.
void the users authority to operate the equipment. 30. The power consumption of the product is 3.137W in networked standby if all wired network ports are connected and all wireless network ports are activated;
31. Shielded cables must be used with this unit to ensure compliance with the Class B FCC limits. 32. Please keep this User Guide properly. Legal Information This symbol indicates that, at the end of your products life, it must not be discarded as domestic waste. Instead, you should dispose of your used equipment at a designated collection point for the recycling of waste electrical and electronic
information. This product is suitable for indoor use only. European Community (EC) directives conformity
Member States relating to electromagnetic compatibility and safety of electrical equipment designed for use within certain voltage limits. The manufacturer of this product is: Zhuhai Seine Technology Co., Ltd., No. 3883,
A declaration of conformity to the requirements of the Directives is available upon
EN 60950.
IV
1. Before Using the Printer 1.1. Introduction of Models
Series Name M6550 Series Picture asic Function Print, Copy, Scan asic Models US Model, T Model, Wi-Fi Model
1-2
Product ie Side view (1) o. Series 4 1 Cover utput Bin Control Panel Side view ( ) o. Series 1 lass Platen Scanning Platform utput Tray
Paper Stop Feeder Tray utomatic Feeder Tray 1-
Rear iew o. Series iagram 4 1 SB Interface etwork Interface Power Interface Rear Cover ote: Laser oner artridge
Type verage Print olume
Standard Capacity bout 1 Pages
ote:
consumables.
1-
2. Paper and Print Media
Media Type
Media size M6550 Series A4, A5, A6, JIS B5, ISO B5, B6, Letter, Legal, Executive,
Media weight
Output tray
2-2
Load t e Pa er Steps are as follows:
a) pen the feeder tray. b) Slide the automatic feed guides to match both sides of the paper. c) Raise the output tray to avoid the paper from slipping and falling. d) oad the paper into the automatic feeder tray with the print-side up. e) d ust the paper stop to match the paper si e.
-
ote: paper will am or cannot be fed in.
up.
Warning
am or the paper curling. Pa er and anuscri t se Process anuscript re uirements:
y e Si e
Steps of se:
). oad the manuscript face down.
-
). lign the manuscript to match the appropriate paper si e. B5 LTR A4 B5 A4 LTR ID COPY ote: corner of the manuscript with the arrow.
). ently put down the cover. ote: correction fluid are completely dried.
smoothness has poor printing performance.
-
) anguage Interface fter the running interface ends, if the printer is connected to the computer through SB cord, then the language interface pops up. sers select the language depending on different needs. ote:
) Installation Process Interface
the installation of driver softwares.
-
) Installation Complete
odel Wired and Wireless et or s 1) Running Interface fter inserting the installation C , the Pantum interface will pop up and the installation C will
-
will select the corresponding series, language and model according to the purchased printer model. Installation Instruction:
-
Wired odel nstallation et
through Installation mode.
) Search for Printer Interface:
appropriate printer devices are connected to the computer.
-
) Printer ist
ame.
) Printer Installation Interface
-
Wi i odel nstallation Wi i
installation.
-
) Installation Complete Interface
-
ninstallation
ninstallation re uires administrator privileges. If a non-administrator runs the uninstaller,
) ninstallation Interface
interface.
-11
) Complete Interface
ote:
reinstalling the driver.
-11 11 ac ased ri er ntroduction
nstallation Ste s 1. Introduction
icense greement
.
-11
-11
. Installation
-11
) ireless etwork ist
-
-
hen the wireless hotspot of printer is active, the user can connect to it directly by searching. The wireless hotspot is enabled by default, and the default password is 1
. The
device in the printer.
control panel for over seconds.
-
Pantum o ile Print and o ile Scan ntroduction to Pantum o ile Print and o ile Scan W at s Pantum o ile Print and o ile Scan Pantum obile Print and obile Scan is a free application, which allows users to directly print photos, documents, ebPages, scanned photos and scanned documents from the mobile terminal. It connects your mobile device with wireless printer through
it will automatically detect compatible Pantum printer to print, which is very convenient and
i-Fi access points. ou ust o nload Pantum o ile Print and o ile Scan To download the Pantum obile Print and obile Scan application, please visit Pantum
Su orted o ile erating System It is available to mobile operating systems with ndroid . or later versions and supports a resolution of dpi or higher. obile Scan supports I S . or later versions eration Ste s for o ile Print or ndroid e ices ote:Pantum mobile printing for ndriod system, the current product supports only for printing t t documents, images or web pages, but not for printing documents in P F, ord, cel, PPT, etc. 1. Turn on the printer. aunch the
(For e ample, the i-Fi in the mobile device, connect it with the i-Fi hotspot may display as Pantum- P-
i-Fi hotspot of Pantum printer
). If there are several Pantum iFi printers, when you select the printer hotspot, please tap enu Button on the printer to be used, select Information Report and select Print iFi
hotspot with your mobile phone.
-
. aunch obile Print pp to enter into home page. Select any item from the enu, such as Print from lbum , select pictures you need to print, click on Print Setting on the top right corner. Select printer, number of copies and paper si e, click on Print on the top right corner to start printing. ote:Install obile Print pp (Select from R Code, oogle Play Store, Pantum
our mobile device. obile Print pp from oogle Play Store and install the application in the
-
6.2.2. For Apple IOS Devices (iPad, iPhone, etc) 1. Turn on the printer. 2. Launch the Wi-Fi in the mobile device, connect it with the Wi-Fi hotspot of Pantum printer (for example, the Wi-Fi hotspot displays Pantum-AP-XXXXXX). If there are several Pantum WiFi printers, when you select the printer hotspot, please tap Menu Button on the printer to be used, select Information Report and select Print WiFi
hotspot with your mobile phone.
6. Click on
6-4
. Click on Print on the bottom left corner, the following interface pops up:
. Click on Select Printer to select the corresponding printer. Select the number of copies. 1 . Click on Print to start printing.
-
4. Click on Menu on the left side, Sidebar interface pops up, you can enter into the Pantum Mall, and check the version and copyright of the Pantum Mobile Scan. 5. Click on Pantum scanning, the Scan List displays:
6. Click on Scan on the top right corner, enter into Scan interface:
7. Click on Select scanner, the following window pops up:
6-10
. Click on Search , the page displays Searching scanner , the interface is as shown below and click on after completing searching. Click on dd IP ddress in the middle of the navigation bar, the following interface pops up:
1 . Click on Scan Parameters at the bottom of the page, the following parameters setting panel pops up:
-1111
5
ote:
en el ocument
-
u le Print
ote:
ote:
-
-
ote:
-
ancel Print o
ac System Print eration Ste s
-
-
-
9. Copy 9.1. Plain Copy 1. Put the manuscript face down into the glass platen. Note:During copying, please do not open the cover to avoid any adverse impact on the image quality.
For the information on "Steps of Using Paper and Manuscript", please refer to Chapter 2.5. 2. Press "Copy" button on the control panel,press "OK" to enter the copy mode. Note:The printer will enter copy mode automatically when restart or startup. 3. Press direction pad or " to select "1. Resolution", "2. Color Intensity", "3. Zoom",
"4. N-in-1", "5. Clone " or "6. Paper Setting" to set copy. 4. Press "Start" button to start copy. 9-2
10. Scan This printer provides two types of scan: "Push Scan", which means scanning through the printers Control Panel operations; "Pull Scan" which means scanning through PC terminal scanning the application. 10.1. Push Scan This section introduces how to scan documents to the PC (only through USB cable
1) Put the document face down on the glass platen. Note:During copying, please do not open the cover to avoid any adverse impact on the image quality.
For the information on Steps of Using Paper and Manuscript, please refer to Chapter 2.5. 2) Press Scan on the Control Panel and press direction pad or " to select "Single Page Scan" or "Merge Scan" to enter into the Scan mode. Note:For the information on "Single Page Scan" and "Merge Scan", please refer to 10.1.1. and 10.1.2. 3) Press "Start" button to start scanning. Note:Formats of scanned attachments: network scan supports PDF, TIFF and JPEG formats. Users can select the Save As Type on the panel for the scanned documents. 10.1.1. Single Page Scan The default scan mode of control panel is Single Page Scan mode.
10-2
Click on "New" and the following window will pops up, edit the name of contacts ,input the E-mail address and then click on "Submit".
Put the document on the platen.
Press "Scan" button on the control panel, and press or " to select "1. Single Page Scan" or "2. Merge Scan", then press "OK" button.
In the "1. Scan To" interface, press "OK" button.
Press or " to select "Scan to E-mail" and press "OK" button.
Press or " to select "E-mail Address Book" or "Group Mail" and press "OK" button.
Press or " to select address or group and then press "OK" button; press "Start"
button to start scan. Please follow these instructions on the settings for group emails. Set the group name for group e-mail sending by webpage, and set the members, i.e.the
documents to the mail server. Then mail server sends the documents to every member of the group. 2. Scan to FTP Scanning to FTP requires a network environment. Users can scan comparatively large
Component on the computer. 10-5 1) peration Steps:
Type the IP address in the eb browser s address bar to access the embedded eb server of the printer.
Click on Setting FTP to enter into FTP Setting interface.
Click ew , the following window will pop up. Set the relative parameters of the FTP Protocol. fter complete setting, click on Submit . 1 -
Put the document on the platen.
Press "Scan" button on the control panel, press or " to select "1. Single Page Scan"
or "2. Merge Scan" and press "OK" button.
In the "1. Scan To" interface, press "OK" button.
Press or " to select "Scan to FTP" and press "OK" button.
Press or " to select the server and press "OK" button; Press "Start" button to start scan. Note: The relative parameters setting of the FTP Protocol are as follows:
FTP Server: IP Address of the server (such as 10.10.145.100 ) Port Number: Default port number is 21 Login Name: For example, anonymous Password: such as (anonymous login needs no password) Confirm Password: For example (anonymous login needs no password) Server Name: For example, PANTUM 10-7 10.2. Pull Scan 10.2.1. Pantum Scan Application Operation Steps:
1) Double click on "Pantum Scan Application" on the computer, the icon is shown as below:
2) The prompt window is shown as below:
3) Set Scan in the right list. Click "Scan" on the bottom right corner and start scan. This product complies with the TWAIN and Windows Image Application (WIA) standard. If using the application which supports TWAIN and WIA standard, users can use the scan
Software (Word and Excel) and Photoshop ,for example, to show the operation. 10-8 10.2.2. TWAIN Scan Driver
Operation Steps:
1) Keyboard shortcuts: Alt+I+P+S to open the applications window. 2) Click on "Device" option and select TWAIN Scan, click the Custom Insert button below. 3) After the window pops up, set the scan information in the right list of "Basic Setting" and
"Advanced Setting". Click on "Scan" and start scan. 10-9 ote: Click on the Port below to select the scan port, which is shown as below:
P otos o peration Steps:
1) aunch Photoshop, click on File is shown below:
Import on the top left corner, select T I Scan, as
steps. 1 -11 W Scan ri er
peration Steps:
1) eyboard shortcuts:
lt I P S to open the application s window.
) Click on evice and select I Scan,click the Custom Insert below.
) The prompt window as is shown below, set the scan information. 1 -11 11
) Click on d ust the Scanned Image uality on the bottom left corner of the above picture,
settings, click on the button, then Scan button to start scan. Photoshop peration Steps:
1) aunch Photoshop, click File - Import on the top left conrner and select shown below:
I Scan, as is
operation steps. 1 -11 10.2.3.2. WIA 2.0 Scan (Windows Vista / Windows Server 2008 and later versions) Operation Steps:
1) Click on "Start"- "All Programs"- "Device and Printer" on the left bottom of the desktop. 2) After the window pops up, select the needed printer, and right-click . 10-13
) Click on Start Scan in the above option bar.
) fter the window pops up, set the scan and click Scan on the bottom right corner and start scan. ancel Scan o uring the scanning, two ways are available to cancel the ob:
1) Press Cancel button on the control panel to cancel the ob.
) Click Cancel button on the scan progress bar interface of the computer to cancel the ob. 1 -11 ac System Scan Scan
peration Steps:
fter installing the printer driver, click System Preferences icon on the bottom left corner 1. of the computer desktop. fter the window pops up, click on Print and Scan . fter the window pops up, click on Scan . 1 -11
. Click on pen Scanner and the scan window will pop up. Click on Show etails on the bottom right corner to set the scan parameters. Click on Scan on the bottom right corner and start scan. 1 -11 all t roug a lications peration Steps:
1) Click on Finder icon on the bottom left corner of the computer desktop, or use keyboard shortcuts command shift C to open the window. Find Image Capture in pplications (or conduct keyboard shortcuts command shift launch the application. to directly switch to pplications ) and click to fter selecting the printer in the left list, set the scan parameters in the right list. Click on
) Scan on the bottom right corner and start scan. 1 -11 W Scan Take Photoshop as an e ample. peration Steps:
1) aunch Photoshop, click on File as is shown below:
Import on the top left corner and select T I Scan,
steps. 1 -11
Routine aintenance leaning t e Printer ote:Please use mild detergents. Please clean the printer in accordance with the following steps:
1. Turn off the main power switch and unplug the power cord and SB cable. Series
. se a soft cloth to wipe the outside of the printer and remove the dust . Series
. Raise the cover and gently wipe the platen glass with a soft cloth. Series 11-
. Raise the scanning platform until it is locked. Series
. pen the output bin by the upper right ridge of the concave section. Series
. Remove the laser toner cartridge along the guides. Series 11-
Warning Some parts of the printer are still hot within a short time after use. hen opening the front cover or rear cover to clean the parts inside the printer, please do not touch the parts in the shaded area as shown in the following picture, so as to avoid burns. ote: hen removing the laser toner cartridge, put the cartridge in a protective bag or wrap it with thick paper to avoid direct light damaging the photosensitive drum. ently wipe the dustproof mirror of laser scanning surface with a cotton swab or a dry and lint-free soft cloth with a little alcohol. Series
. Clean the inside of the printer by using a dry and lint-free cloth to gently wipe the shaded area as shown in the picture below. Series 11-
aintenance of Laser oner artridge se and aintenance of Laser oner artridge For better print uality, please use the original Pantum laser toner cartridge. ote: when using the laser toner cartridge, please pay attention to the following:
the package.
resulting damage is not included in the printer warranty.
toner cartridge near any source of ignition, so as to avoid causing a fire.
the toner leakage problem. In case of the toner leakage resulting in that the toner contacts with your skin or splashes into your eyes and mouth, please immediately wash with clear water, and consult a doctor immediately if you feel unwell.
reachable by children. Ser ice Life of t e Laser oner artridge Service life of the laser toner cartridge depends on the amount of toner that print obs re uire.
cartridge. Re lace Laser oner artridge ote: Before replacing the laser toner cartridge, please pay attention to the following:
avoid spilling.
accidentally spilling.
cartridge into the printer, so as to avoid photosensitive drum damage caused by
photosensitive drum so as not to scratch it. 11-
Replacement steps are as follows:
1. Turn off the printer and raise the scanning platform until it is locked. Series
. pen the output bin by the upper right ridge of the concave section. Series
Series 11-
. pen the package of a new laser toner cartridge, hold the handle of the cartridge and gently shake around to times, so as to make the toner evenly distributed inside the cartridge. Remove the cartridge protector (blister cover), insert the cartridge along the guides into the
that the cartridge is fully inserted. ote:Check whether there is any seal before installing the laser toner cartridge into the printer if there is any, please tear off the seal and then install the cartridge. Cover the output bin and close the scanning platform. Series
. Restart the printer, and use the product control panel to print a test page. 11-
Please follow the following steps to clear the ammed paper if you are prompted of a paper am by the C . 1) Raise the scanning platform until it is locked. Series
) pen the output bin by the upper right ridge of the concave section. Series 1 -
) Remove the laser toner cartridge along the guides. Series
) ently draw the ammed paper out along the paper output direction. Series
) fter removing the ammed paper, insert the laser toner cartridge into the printer along the guides until you hear a click assuring you that the cartridge is fully inserted. Series 1 -
) eatly put the paper in the tray , and do not carry out the ne t print until the indicator light resumes print-ready status.
) If you can not remove the ammed paper yourself, please contact your local Pantum uthori ed Repair Center or send the printer to the nearest Pantum uthori ed Service Center for repair. rror essage rror message ause easure Close utput Bin The paper bin is not fully closed. Close utput Bin. o aser Toner Cartridge etected The laser toner cartridge is installed incorrectly or laser toner cartridge is damaged. The laser toner cartridge is installed correctly or new laser toner cartridge is replaced. Toner ow Cartridge toner is low The toner cartridge life has e pired Cartridge toner is e hausted. Replace ew aser Toner Cartridge Replace ew aser Toner Cartridge Feed am The print paper is loaded incorrectly. The paper is outside of
Please correctly load the print paper. Printer paper am The print paper is loaded incorrectly. Please correctly load the print paper. Scanner is Busy ith other scan obs. Scan failed Scanner internal failure. Please cancel the current scan ob or wait for the completion of other scan obs. Please contact Pantum Customer Service. ote:If the problem remains, please contact Pantum Customer Service. 1 -
First-level Menu Second-level Menu Third-level Menu 5. Clone 6. Paper Setting Fourth-level Menu 1. Close*
2. 2X2 3. 3X3 4. 4X4 1. Paper Size 2. Paper Type Fifth-level Menu Sixth-level Menu 1. A4*
2. Letter 3. B5 4. A5 5. A6 6. Executive 1. Plain Paper*
2. Thick Paper 3. Envelope Paper 4. Film Paper 5. Carton Paper 6. Label Paper 7. Thin paper 2. ID Card Copy 1. Full page up and down*
2. Half page up and down 3. Half page left and right 4. A5 Length 1. Manual adjustment*
2. Automatic adjustment 1. Paper Size 1. Arrangement Mode 2. Luminosity 3. Paper Setting 1. A4*
2. Letter 13-3 First-level Menu Second-level Menu Third-level Menu 1. Luminosity Fourth-level Menu 1. Manual adjustment*
2. Automatic adjustment Fifth-level Menu Sixth-level Menu 3.Bill Copy 2. Paper Setting 1. Paper Size 1. A4*
2. Letter 3. B5 4. A5 5. A6 6. Executive 13.2. Scan Settings General Menu Structure First-level Menu Second-level Menu Third-level Menu Fourth-level Menu Fifth-level Menu Sixth-level Menu 1. Resolution 1. 75dpi 2. 150dpi 3. 300dpi*
4. 600dpi 1. Color*
2. Scan Setting 2. Scan Color 2. Monochrome 3. Gray 1. JPEG 3. Save Type 2. TIFF 4. Scan Scope 3. PDF*
1.Full Platen*
2. A4 3. A5 4. B5 5. Letter 13-4 13.3. System Settings General Menu Structure First-level Menu Second-level Menu Third-level Menu Fourth-level Menu Fifth-level Menu Sixth-level Menu 3. System Setting 1. Close*
2. Open 1. 2. English 3. Italiano
5.Franais 6. Espaol 7. 8. 1. Yes 2. No*
1. 1min*
2. 5min 3. 15min 4. 30min 5. 60min 1. Wired Network setting 1. Toner Save Setting 2. Language Setting 3. Restore to Factory Setting 4. Sleep Time Setting 5. Network setting 1. IPv4 2. IPv6 2. Wireless Network setting WPS PIN Mode 1. Auto*
2. Manual 1. Close 2. Open*
Connecting WPS WPS PIN:
xxxxxxxx The WPS connection succeed/WPS connection 13-5
13.4. Information Report General Menu Structure First-level Menu Second-level Menu Third-level Menu Fourth-level Menu Fifth-level Menu Sixth-level Menu 1. Print Demo Page 2. Print Information Page 3. Print Menu Structure 4. Print Menu Setting 5. Print Network
4. Information Report 6. Print Network Service 7. Print Email Address 8. Print Group Email 9. Print FTP Address 10. Print Wi-Fi Hotspot 11. Print Wi-Fi
13.5. Version Information General Menu Structure First-level Menu Second-level Menu Third-level Menu Fourth-level Menu Fifth-level Menu Sixth-level Menu 1. Panel Firmware Version 5.Version Information 2. Data Firmware Version 3. Engine Firmware Version x.x.x.x x.x.x.x x.x.x.x 13-7
Product S ecifications ote:
(
)
1 -
Print Speed 22ppm (A4)/23ppm (Letter) Print Time of First Page <7.8sec Monthly Maximum Print Copies 20,000 pages Print Language GDI
Copy Speed FCOT Maximum Pages for Successive Print 22cpm (A4)/23cpm (Letter)
<11sec 1-99 Pages Zoom Ratio 25%~400%
Other Copy Functions ID copy, Receipt copy, N-up copy, Clone copy
Scan Type Flatbed+ADF(M6550 Series) Maximum Scan Size Flatbed: 216297mm ADF: 216 x 356 mm Chromoscan Yes Scan Output Function Scan to E-mail, PC, FTP
14-3