FCC ID: 2AUW8-VWRP3500 8-IN-1 TURNTABLE MUSIC CENTER

Turntable Speaker With CD VWRP-3500-ES User Manual

- USER MANUAL -

Product Description 1. Turntable Platter 2. Turntable Shaft 3. Tonearm 4. Tonearm Lever 5. Auto-stop Switch 6. Speed Switch 7. Hold Down Clip 8. 45 RPM Adaptor 9. Display 10. Mode Key: Press to change the mode 11. Press to open the CD door 12. Power Key: Press to turn on the unit 13. REPEAT: In CD/USB mode, press REPEAT for the first time will repeat current playing. Press REPEAT twice will repeat the whole disc. Press REPEAT for three times will cancel repeat function. 14. CD Door 15. 16. In USB/CD/Bluetooth mode:Previous section. In FM mode: Previous station. In USB/SD/CD/Bluetooth mode:Next section. In FM mode: Next station. 17. Volume Knob In USB/CD/Bluetooth mode:Play/Pause. In FM mode:Automatically searching station. 18.

/BT OUT In PHONO mode: Long press this key to transmit record playing on the unit to external Bluetooth receivers. Long press this key again to turn off the Bluetooth Out function. The connection between the unit and Bluetooth receivers will be disconnected. 19. / REC In USB/CD mode: When press this key for the first time, the player will stop playing. Press this button will continue to play from current music. When press the this key twice, the player will enter stop state. Press this button will start from first song and play in sequence. In PHONO mode: Press this key to record the playing music from record disc during the Phono mode after inserting a USB flash stick to the USB port. And then press this key again to stop the recording and replay the record track.To delete the recorded track, please long press this key during it is playing(Note:

The record function cannot work in the Bluetooth Out status . 20. FM Antenna(fixed) 21. Audio Output Jack 22. Line input jack (connect another audio output device or mobile phone) 23. DC 12V power input jack 24. USB input jack(for music playback/record) 1. Power Key 2. Mode Key: Press to change the mode 3. REPEAT: In CD/USB mode, press REPEAT for the first time will repeat current playing. Press REPEAT twice will repeat the whole disc. Press REPEAT for three times will cancel repeat function. 4. MUTE Key 5. In USB/CD/Bluetooth mode:Play/Pause. In FM mode:Automatically searching station. In PHONO mode: Long press this key to transmit record playing on the unit to external Bluetooth receivers. Long press this key again to turn off the Bluetooth Out function. The connection between the unit and Bluetooth receivers will be In USB/CD/Bluetooth mode: Press this key to previous/next section In FM mode: Press this key to previous/next station 7. Volume Key: Press to turn up/down volume.Note: There is no function on AUX disconnected. 6.

mode 8. STOP/REC In USB/CD mode:

When press the key for the first time, the player will stop playing. Press Play/Pause key will continue to play from current music. When press the key twice, the player will enter stop state. Press Press Play/Pause key will start from first song and play in sequence. In PHONO mode:

Press this key to record the playing music from record disc during the Phono mode after inserting a USB flash stick to the USB port. And then press this key again to stop the recording and replay the record track.To delete the recorded track, please long press this key during the recorded track is playing(Note: The record function cannot work in the Bluetooth Out state . 9. Number Key For CD disc,

(1)To appoint 1-9 tracks, press the corresponding number keys(1-9)

(2)To appoint 10 track, press the number key (0)

(3)To appoint 10+ tracks, press the number key(10+). For example: the 15th song, press number key (10+) and (5).

(4)To appoint 20+ tracks, press the number key(10+) for twice. For example: the 25th song, press number key(10+) for twice time and press number key (5).If the track does not exist, the key is invalid. For MP3 disc, press the number keys to select the tracks. For example, the 38th song, press the number key(3) and number key(8). Essential Set up 1.Install the long legs to brackets at the bottom of the unit properly. Make sure the unit stands firmly. 2.Place the speakers on a flat and level surface. The selected location should be stable and free from vibration. 3.Plug the power cord to unit firstly and then plug the adapter to wall power outlet. General Operation CD 1. Press mode button to enter CD mode. 2. Press the button to open the CD door. 3. place a CD in the disc tray with the label facing up and press the button to close the CD door. 4. Use the controls on the unit or the remote to begin playing the loaded disc.

- The first time you use your Bluetooth device with this player, you will need to connect or pair it with the player first.

- Switch to the Bluetooth model, then use Bluetooth device to search the VICTOR VW3500 pairing.

- There will be a prompt sound after the successful pairing.

- If the pairing device is disconnected, the unit will also issue a prompt sound. BLUETOOTH In USB

-Connect your USB stick (not included) to the USB socket for music playback.

-Record the record track in music to USB flash stick during the PHONO mode. 1.You can record the playing music from Phono record into the USB flash stick 2.Insert a USB flash stick to the USB port during the PHONO mode. 3.Short press the STOP/REC key on the unit or remote during the Phono record is playing. 4. Short Press STOP/REC key again to stop the recording and replay the recorded track 5.To delete the recorded track, long press the STOP/REC key during it is playing When you switch the unit to the radio mode, you can listen to the FM radio program in this mode. 1. This radio antenna is on the back of the machine. When you need to listen to radio, please open the FM antenna. 2. In FM mode, press the on the unit or remote control to automatically search station. It will save the station once searching 3.Press the or on the unit or remote control to select station. Switching to LINE IN mode, use 3.5mm audio cable(not included) to connect player with other audio output devices (such as mobile FM completed. LINE IN phone, computer, etc) Turntable Operation 1. Rotate the knob to the PHONO mode. The mode indicator will be Red. 2. Select the desired speed33-1/3, 45, 78 and place the record on the platter.

(Remark: When playing a 45 RPM record, please use the 45 RPM adapter.) 3. Remove the stylus protector from the stylus. Release the tone arm from the tone arm clip. 4. Use the tonearm lever to raise the tonearm. Move the tonearm gently to desired position over the record. Push the lift lever again to descend the tonearm slowly onto the desired position on the record to start playing. 5. When the record is finished playback, push the tonearm lever again to lift up the tonearm. And return the tonearm to the arm rest. Use the tonearm lever to descend the tonearm. Remark:

1.When the Auto stop switch is ON, the record will stop automatically when finished. When the Auto stop switch is OFF, the record will not stop automatically when finished. 2.Do not touch the stylus tip by fingers. Bluetooth Out during the PHONO mode. This function can transmit the record playing on the unit to external Bluetooth speaker/headphone by Bluetooth wireless connection 1. During the Phono mode, long press the

/ BT Out key on the unit or key on the remote to enter Bluetooth pairing status. 2. Turn on the external Bluetooth receiver device (i.e Bluetooth Speaker or Bluetooth Headphone) and entering the pairing mode. 3. The turntable unit and external Bluetooth receiver will connect automatically. This process can take up to approx. 30-45 seconds.

(Remark: Place the Bluetooth receiver device within 1m of the unit to connect properly.) 4. Once turntable unit is successfully connected with the external Bluetooth speakers, you will hear a short confirmation sound from the speakers. 5. Select the desired speed331/3, 45, 78 and place the record on the platter. The music will be heard from the external Bluetooth speaker/headphone. In this case, the unit is automatically activated in silent mode. 6. If want to turn off BT Out function, long press the

/ BT Out key on the unit or key on the remote again, the Bluetooth connection between unit and Bluetooth receivers will be disconnected. Remark: Bluetooth Out only work with record playback. Bluetooth Out cannot work in Bluetooth IN/LINE IN/USB/CD/FM function mode. Audio Out Operation appropriate input of your stereo system. speakers, the volume level will be very low. The audio Jacks output analog line-level signals and could be connected directly with a pair of active/powered speakers or the Note: The Audio Jacks are not designed to be connected directly to the passive/unpowered speakers. If connected to the passive Trouble Shooting Problem There is no power There is no sound from the speakers The speakers could not be connected to my Bluetooth device The turntable speaker stop before the record is finished. In Bluetooth Out function, the unit and bluetooth receiver do not connect successfully Solution

-Power cord is not properly connected.

-No power at the power outlet.

-The speaker jack is not properly connected.

-The devices Bluetooth function is not turned on.

-The speakers are actively connected to another Bluetooth device.

-Adjust the Auto-stop switch to OFF position.

-Turn the unit and Bluetooth receiver off. Follow the pairing step again from the beginning.

-Check whether the turntable unit connect with another Bluetooth receiver. 2.To check whether there is disc in the tray. 3.The disc is dirty. Please clean the disc. the power and turn it on again after 10seconds. Dont play disc 1.To check whether the disc is put in the proper direction. Button does not work It may be caused by the power wave or other abnormity, please turn off FCC:

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from that to which the receiver is

-Consult the dealer or an experienced radio/TV technician for help Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two

(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas licence-exempt RSS(s). Operation is subject to the following two conditions:

(1) This device may not cause interference.

(2) This device must accept any interference, including interference that may cause undesired operation of the device. Lmetteur/rcepteur exempt de licence contenu dans le prsent appareil est conforme aux CNR dInnovation, Sciences et Dveloppement conomique Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes :

(1) L' appareil ne doit pas produire de brouillage;

(2) L' appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d' en compromettre le fonctionnement. connected. conditions:

IC:

FCC ID and IC Label Location FCC ID: 2AUW8-VWRP3500 IC: 28698-VWRP3500 HVIN: VWRP-3500-ES FCC ID: 2AUW8-VWRP3500 IC: 28698-VWRP3500 HVIN: VWRP-3500-MH

Agent Authorization Company: ZHUHAI YALI TECHNOLOGY CO., LTD Address: 4th Floor, No.119, Huawei Road, Qianshan Industrial Park, ZhuHai, GuangDong, China Product Name: 8-IN-1 TURNTABLE MUSIC CENTER Model Number(s): VWRP-3500-ES, VWRP-3500-MH, VWRP-3500, VWRP-3500-xx(xx can be replaced by number from "A" to "Z". DA555-CD, DAxxx-CD(xxx can be replaced by number from "0"-"9" and letter from "A"to "Z"

Product Description: 8-IN-1 TURNTABLE MUSIC CENTER We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature:

Date: Jul. 29, 2022 Name:

MONICA LEE Title:

General Manager Company: ZHUHAI YALI TECHNOLOGY CO., LTD

ZHUHAI YALI TECHNOLOGY CO.,LTD 4th Floor, No.119, Huawei Road, Qianshan Industrial Park, ZhuHai, GuangDong, China Jul. 29, 2022 Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Subject: Explanation of differences between product types FCC ID: 2AUW8-VWRP3500 Models: VWRP-3500-ES, VWRP-3500-MH, VWRP-3500, VWRP-

3500-xx(xx can be replaced by number from "A" to "Z". DA555-CD, DAxxx-CD(xxx can be replaced by number from "0"-"9" and letter from "A"to "Z"

To Whom It May Concern:

We, The ZHUHAI YALI TECHNOLOGY CO., LTD hereby declare that the Test Model is identical with the Series Model, except for the model name and appearance color. Except for the different above, no other modification is performed. Sincerely, ZHUHAI YALI TECHNOLOGY CO., LTD Signature:

[MONICA LEE, General Manager]

ZHUHAI YALI TECHNOLOGY CO.,LTD 4th Floor, No.119, Huawei Road, Qianshan Industrial Park, ZhuHai, GuangDong, China Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: Jul. 29, 2022 Subject; Request for Confidentiality FCC ID: 2AUW8-VWRP3500 To Whom It May Concern, Pursuant to the provisions of the Commission's rules Title 47 Sections 0.457 and 0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market.

{J Schematic Diagram

& Block Diagram J Operational Description C Parts List Tune-up Procedure In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR 2.803 and the importation rules in Title 47 CFR 2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s);

External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuant to KDB 726920 D01. Itis our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature: Me Name: MONICA LEE Title: Sales Manager