The product description 1. Product name: Wireless Charger 2. ModelWX10-G15-30mm 3. Electrical parameters: INPUT:24-36VD.C., OUTPUT:10W Max;
4. Functions: air-gap wireless charging, such as mobile phone charging;
5. Operating instructions:
1fix the product on the bottom of the table or other objects 2charge the phone or other devices with receiving signals at intervals of 15-30mm;
3the surface of the product shall not be covered with other articles. The product shall be used at 0-40 6. FCC COMPLIANCE Statement:
This device complies with Part 15 of the FCC Rules.Operation is subject to the following two conditions:
(1)This device may not cause harmful interference, and
(2)This device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. 1Increase the separation between the equipment and receiver. 2Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. 3Consult the dealer or an experienced radio/TV technician for help. Warning: Changes or modifications to this unit not expressly approved by the part responsible for compliance could void the users authority to operate the equipment. 7.FCC Radiation Exposure Statement This equipment complied with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. 8.Icon annotations 1 For indoor use only 2 This appliance bears the WEEE mark (Waste of Electric and Electronic Equipment) signifying that, at the end of its life cycle, it should not be disposed of with household waste, but at a recycling centre. The recycling of waste contributes to the conservation of our environment. 9Installation diagram Double-sided adhesive 3.5*20mm 7.5mm Screwsstandard Tape installationoptional 10.Mobile phone charging center location instructions Screws 3 Three layers of corrugated paper Double-sided adhesive fixture Fixed Positioning fixture Product positioning Iron absorption Charging label Positioning fixture Wireless charger table Iron absorption noteThe tooling is optional