Quick Installation Guide AC1200 Wireless Dual Band Gigabit Router Models: A3100R Hardware Installation Default SSIDs 2.4G: TOTOLINK_A3100R 5G: TOTOLINK_A3100R_5G Smart Phone iPad PC Wall Socket Copyrights 2017 TOTOLINK. All Rights Reserved. Website:http://www.totolink.net Information in this document is subject to change without prior notice. V1.0 | 2017.11.30 Network Cable Network Cable Router GPON Terminal Configure the Router Run any Web browser. Enter 192.168.0.1 in the address bar. http://192.168.0.1/
Enter admin for both User Name and Password, then click LOGIN. LEDs On Blink every one second Blinking quickly The power is on. The router finishes the booting process and is working normally. When the reset process is being proceeded. CPU
(Front panel) Off On Off Blinking On Off The power is off. The WAN port is connected to an Ethernet port on a Modem or the wall. The WAN port is disconnected from an Ethernet port on a Modem or the wall. The WAN port is sending or receiving data. LAN 1/2 port is connected to a computer. LAN 1/2 port is disconnected from a computer. Blinking LAN 1/2 port is sending or receiving data. WAN LAN Ports and button DC IN port Connect to an electrical outlet with the supplied power adapter. LAN1/2 port Connect to PCs or switches with Ethernet cables. WAN port RST/
WPS button Connect to an Ethernet port on a Modem or the wall for Internet access. Enable WPS function: when the router is powered on, press and hold this button for 1~3 seconds until the front panel CPU LED turns solid on. Reset to factory defaults: when the router is powered on, press and hold for 5 seconds or more until the CPU LED blinks quickly. 3. Please pay attention to the waterproofing and moisture-proof when storing, transporting and running. 4. Please use the power adapter provided with the router. B.Static IP. If you choose Static IP, please enter IP Address, Subnet Mask, Default Gateway and DNS information provided by your ISP. admin TOTOLINK_A3100R_5G TOTOLINK_A3100R NO. Connection Type Description A B C DHCP Static IP PPPoE No configuration, simply connect the WAN port to existing Ethernet port by cable. Youre required to enter IP Address, Subnet Mask, Default Gateway and DNS information provided by your ISP. Youre required to enter User Name and Password provided by your ISP. A.DHCP. After choose DHCP, you can go on with the 5GHz & 2.4GHz Wireless Settings. Now you can see the Easy Setup page. All basic settings could be done here, including Internet Settings and 5GHz & 2.4GHz Wireless Settings. Internet Settings. Connection Status shows physical connection of routers WAN port. Choose one Connection Type according to your ISP(Internet Service Provider). NOTE:
1. Please disconnect the power adapter and all cables during thunderstorm weather;
2. Keep away from heat source and keep well ventilated;
sz83830116@163.gd C.PPPoE. If you choose PPPoE, please enter the User Name and Password provided by your ISP. Configure the Router Connect Wireless Network 5 5G Wireless Settings. You could customize your 5GHz wireless Network Name(SSID) and Password. The WPA/WPA2-PSK is recommended for Encryption. 7 Wait for a few seconds, the routers Status interface turns up, showing all connection information. After router settings, please follow below steps to connect wireless network:
1 Click or icon on the right bottom of your desktop:
2 Choose the SSID that you have set on Configure the Router. Enter correct password. Click Connect or Next. TOTOLINK_A3100R_5G TOTOLINK 6 2.4G Wireless Settings. Verify or change your 2.4GHz wireless Network Name(SSID) and Password. The WPA/WPA2-PSK is recommended for Encryption. Click Apply. Connection Status PPPoE, Connected Connection Time 0day0hour0minute0second IP Address Subnet Mask Default Gateway DNS Server MAC Address 164.126.106.178 255.255.255.255 164.126.96.1 202.96.134.133 F4:28:53:00:01:84 TOTOLINK_A3100R TOTOLINK NOTE:
We recommend that you remember your Wi-Fi network name and password for future use. Enable WPS function: when the router is powered on, press and hold this button for 1~3 seconds until the front panel CPU LED turns solid on. Reset to factory defaults: when the router is powered on, press and hold for 5 seconds or more until the CPU LED blinks quickly. TOTOLINK_test1 TOTOLINK_test2 TOTOLINK_test3 TOTOLINK_test4 TOTOLINK_A3100R_5G TOTOLINK_A3100R TOTOLINK_test5 TOTOLINK_test1 TOTOLINK_test2 TOTOLINK_A3100R_5G TOTOLINK_A3100R Connect Wireless Network 3 Wireless network connected. Enjoy your Wi-Fi. TOTOLINK_A3100R_5G Connected, secured TOTOLINK_A3100R TOTOLINK_test1 TOTOLINK_test2 TOTOLINK_test3 TOTOLINK_test4 TOTOLINK_test5 For Mobile device users, please go to SettingsWi-Fi to connect wireless network. For more information, go to www.totolink.net. FAQ4
(Frequently Asked Questions) What can I do if the login page does not appear?
1 1.Check your computers IP address, make sure it is set to Obtain an IP address automatically. Steps: right click NetworkPropertiesChange adapter settings---Local Area ConnectionPropertiesInternet Protocol Version 4(TCP/IPv4). 2.Make sure you enter the correct default access: 192.168.0.1. Try again. 3.Use another web browser and try again. 4.Reboot your router and try again. 2 What can I do if I cannot access the Internet?
1.Check the Internet status by connecting a computer directly to the modem via Ethernet cable. If it is not working properly, contact your Internet Service Provider. 2.Setup your router again according to part 2 Configure the Router. 3.Reboot your cable modem (if have) and router, then try again. 3 How to reset the router to factory default Settings?
Keep the router powered on, press and hold the RST/WPS button for 5 seconds or more until the front panel CPU LED blinks quickly. It will restore to factory default settings. 4 What can I do if I forget the routers Web login User Name and Password?
In case you changed your routers Login User Name and Password, we suggest you reset your router to factory default settings by above operations. Then use the following parameters to login the routers Web interface:
Default IP address: 192.168.0.1, User Name: admin, Password: admin 5 What can I do if I forget my wireless network Password?
By default, TOTOLINK router dont have any wireless network password. If you have set one, please log in to routers Web Management page, go to 5G Wireless---Basic Settings or 2.4G Wireless --- Basic Settings to obtain or reset your password. 5 FCC warning This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment . This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment should be installed and operated with minimum distance 20cm between the radiator& your body. 5150-5250MHz is restricted for indoor use only in all EU member states. AT BE CY CZ DK EE FI FR DE EL HU IE IT LV LT LU MT NL PL PT SK SI ES SE UK BG RO HR
(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However,there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception,which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following Measures:
1. Reorient or relocate the receiving antenna. 2. Increase the separation between the equipment and receiver. 3. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. 4. Consult the dealer or an experienced radio/TV technician for help.