all | frequencies |
|
|
|
|
exhibits | applications |
---|---|---|---|---|---|---|---|
manual | photos | label |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 2 |
|
User Manual | Users Manual | 3.87 MiB | July 21 2022 | |||
1 2 |
|
Internal Photos | Internal Photos | 1.24 MiB | July 21 2022 | |||
1 2 |
|
External Photos | External Photos | 967.08 KiB | July 21 2022 | |||
1 2 |
|
Label & Label Location | ID Label/Location Info | 192.54 KiB | July 21 2022 | |||
1 2 | Block Diagram | Block Diagram | July 21 2022 | confidential | ||||
1 2 |
|
Confidentiality Letter | Cover Letter(s) | 103.02 KiB | July 21 2022 | |||
1 2 | Operation Description | Operational Description | July 21 2022 | confidential | ||||
1 2 |
|
Power of Attorney Letter | Cover Letter(s) | 135.11 KiB | July 21 2022 | |||
1 2 | Schematics | Schematics | July 21 2022 | confidential | ||||
1 2 |
|
Test Report | Test Report | 2.43 MiB | July 21 2022 | |||
1 2 |
|
Test Setup Photos | Test Setup Photos | 528.17 KiB | July 21 2022 |
1 2 | User Manual | Users Manual | 3.87 MiB | July 21 2022 |
Product Name and Model Number User Manual Thank you for choosing our product. Please read the instructions carefully before operation. Follow these instructions to ensure that the product is functioning properly. The images shown in this manual are for illustrative purposes only. For further details, please visit our Companys website www.zkteco.com. P a g e | 1 Copyright2020 ZKTECO CO., LTD. All rights reserved. ProMA Series User Manual Copyright 2022 ZKTECO CO., LTD. All rights reserved. Without the prior written consent of ZKTeco, no portion of this manual can be copied or forwarded in any way or form. All parts of this manual belong to ZKTeco and its subsidiaries (hereinafter the "Company" or
"ZKTeco"). is a registered trademark of ZKTeco. Other trademarks involved in this manual are owned by Trademark their respective owners. Disclaimer This manual contains information on the operation and maintenance of the ZKTeco equipment. The copyright in all the documents, drawings, etc. in relation to the ZKTeco supplied equipment vests in and is the property of ZKTeco. The contents hereof should not be used or shared by the receiver with any third party without express written permission of ZKTeco. The contents of this manual must be read as a whole before starting the operation and maintenance of the supplied equipment. If any of the content(s) of the manual seems unclear or incomplete, please contact ZKTeco before starting the operation and maintenance of the said equipment. It is an essential pre-requisite for the satisfactory operation and maintenance that the operating and maintenance personnel are fully familiar with the design and that the said personnel have received thorough training in operating and maintaining the machine/unit/equipment. It is further essential for the safe operation of the machine/unit/equipment that personnel has read, understood and followed the safety instructions contained in the manual. In case of any conflict between terms and conditions of this manual and the contract specifications, drawings, instruction sheets or any other contract-related documents, the contract conditions/documents shall prevail. The contract specific conditions/documents shall apply in priority. ZKTeco offers no warranty, guarantee or representation regarding the completeness of any information contained in this manual or any of the amendments made thereto. ZKTeco does not extend the warranty of any kind, including, without limitation, any warranty of design, merchantability or fitness for a particular purpose. ZKTeco does not assume responsibility for any errors or omissions in the information or documents which are referenced by or linked to this manual. The entire risk as to the results and performance obtained from using the information is assumed by the user. ZKTeco in no event shall be liable to the user or any third party for any incidental, consequential, indirect, special, or exemplary damages, including, without limitation, loss of business, loss of profits, business interruption, loss of business information or any pecuniary loss, arising out of, in connection with, or P a g e | 1 Copyright2022 ZKTECO CO., LTD. All rights reserved. ProMA Series User Manual relating to the use of the information contained in or referenced by this manual, even if ZKTeco has been advised of the possibility of such damages. This manual and the information contained therein may include technical, other inaccuracies or typographical errors. ZKTeco periodically changes the information herein which will be incorporated into new additions/amendments to the manual. ZKTeco reserves the right to add, delete, amend or modify the information contained in the manual from time to time in the form of circulars, letters, notes, etc. for better operation and safety of the machine/unit/equipment. The said additions or amendments are meant for improvement /better operations of the machine/unit/equipment and such amendments shall not give any right to claim any compensation or damages under any circumstances. ZKTeco shall in no way be responsible (i) in case the machine/unit/equipment malfunctions due to any non-compliance of the instructions contained in this manual
(ii) in case of operation of the machine/unit/equipment beyond the rate limits (iii) in case of operation of the machine and equipment in conditions different from the prescribed conditions of the manual. The product will be updated from time to time without prior notice. The latest operation procedures and relevant documents are available on http://www.zkteco.com If there is any issue related to the product, please contact us. ZKTeco Headquarters Address ZKTeco Industrial Park, No. 32, Industrial Road, Tangxia Town, Dongguan, China. Phone
+86 769 - 82109991 Fax
+86 755 - 89602394 For business related queries, please write to us at: sales@zkteco.com. To know more about our global branches, visit www.zkteco.com. P a g e | 2 Copyright2022 ZKTECO CO., LTD. All rights reserved. ProMA Series User Manual About the Company ZKTeco is one of the worlds largest manufacturer of RFID and Biometric (Fingerprint, Facial, Finger-vein) readers. Product offerings include Access Control readers and panels, Near & Far-range Facial Recognition Cameras, Elevator/floor access controllers, Turnstiles, License Plate Recognition (LPR) gate controllers and Consumer products including battery-operated fingerprint and face-reader Door Locks. Our security solutions are multi-lingual and localized in over 18 different languages. At the ZKTeco state-of-the-art 700,000 square foot ISO9001-certified manufacturing facility, we control manufacturing, product design, component assembly, and logistics/shipping, all under one roof. The founders of ZKTeco have been determined for independent research and development of biometric verification procedures and the productization of biometric verification SDK, which was initially widely applied in PC security and identity authentication fields. With the continuous enhancement of the development and plenty of market applications, the team has gradually constructed an identity authentication ecosystem and smart security ecosystem, which are based on biometric verification techniques. With years of experience in the industrialization of biometric verifications, ZKTeco was officially established in 2007 and now has been one of the globally leading enterprises in the biometric verification industry owning various patents and being selected as the National High-tech Enterprise for 6 consecutive years. Its products are protected by intellectual property rights. About the Manual This manual introduces the operations of the ProMA Series. with the actual products. Features and parameters with are not available in all devices. All figures displayed are for illustration purposes only. Figures in this manual may not be exactly consistent P a g e | 3 Copyright2022 ZKTECO CO., LTD. All rights reserved. ProMA Series User Manual Document Conventions Conventions used in this manual are listed below:
GUI Conventions Convention Description Bold font Used to identify software interface names e.g. OK, Confirm, Cancel. Multi-level menus are separated by these brackets. For example, File > Create >
Folder. For Software For Device Convention Description
Button or key names for devices. For example, press <OK>. Window names, menu items, data table, and field names are inside square brackets. For example, pop up the [New User] window. Multi-level menus are separated by forwarding slashes. For example,
[File/Create/Folder].
Symbols Convention Description This implies about the notice or pays attention to, in the manual. The general information which helps in performing the operations faster. The information which is significant. Care taken to avoid danger or mistakes. The statement or event that warns of something or that serves as a cautionary example. P a g e | 4 Copyright2022 ZKTECO CO., LTD. All rights reserved. ProMA Series User Manual Table of Contents 1 INSTRUCTION FOR USE ..............................................................................................................................7 1.1 HOW TO SCAN THE QR CODE? .............................................................................................................................................................................. 7 1.2 STANDING POSITION, POSTURE AND FACIAL EXPRESSION................................................................................................................................ 7 1.3 FACE REGISTRATION................................................................................................................................................................................................ 8 1.4 FINGER PLACEMENT ................................................................................................................................................................................................ 9 2 APPEARANCE ........................................................................................................................................... 10 2.1 PROMA-QR .......................................................................................................................................................................................................... 10 2.2 PROMA .................................................................................................................................................................................................................. 11 2.3 PROMA-RF ........................................................................................................................................................................................................... 12 2.4 TERMINAL AND WIRING DESCRIPTION............................................................................................................................................................... 13 2.4.1 TERMINAL DESCRIPTION...............................................................................................................................................................................................13 2.5 WIRING DESCRIPTION ...........................................................................................................................................................................................15 2.5.1 POWER CONNECTION.................................................................................................................................................................................................... 15 2.5.2 LOCK RELAY CONNECTION ..........................................................................................................................................................................................15 2.5.3 DOOR SENSOR, EXIT BUTTON, ALARM AND AUXILIARY CONNECTION....................................................................................................16 2.5.4 WIEGAND CONNECTION...............................................................................................................................................................................................16 2.5.5 RS485 CONNECTION.......................................................................................................................................................................................................17 2.5.6 ETHERNET CONNECTION.............................................................................................................................................................................................. 17 3 INSTALLATION ......................................................................................................................................... 18 3.1 INSTALLATION ENVIRONMENT ............................................................................................................................................................................. 18 3.2 DEVICE INSTALLATION.......................................................................................................................................................................................... 18 4 STANDBY INTERFACE .............................................................................................................................. 20 5 VERIFICATION MODE ...............................................................................................................................21 5.1 QR CODE VERIFICATION ................................................................................................................................................................................. 21 5.2 FACIAL VERIFICATION........................................................................................................................................................................................... 21 5.3 CARD VERIFICATION..............................................................................................................................................................................................22 5.4 FINGERPRINT VERIFICATION ............................................................................................................................................................................ 22 6 LOGIN WEBSERVER ..................................................................................................................................23 7 FORGOT PASSWORD ............................................................................................................................... 25 8 USER MANAGEMENT ............................................................................................................................... 28 8.1 USER REGISTRATION............................................................................................................................................................................................. 28 8.1.1 BASIC INFORMATION ......................................................................................................................................................................................................28 8.1.2 ONLINE REGISTRATION ..................................................................................................................................................................................................29 8.2 SEARCH FOR USERS...............................................................................................................................................................................................32 8.3 EDIT USER.............................................................................................................................................................................................................. 32 8.4 DELETE USER......................................................................................................................................................................................................... 33 9 ADVANCED SETTINGS ............................................................................................................................. 34 P a g e | 5 Copyright2022 ZKTECO CO., LTD. All rights reserved. ProMA Series User Manual 9.1 COMMUNICATION SETTINGS................................................................................................................................................................................34 9.2 CLOUD SERVER SETTING ...................................................................................................................................................................................... 35 9.3 DATE SETUP ...........................................................................................................................................................................................................36 9.4 SYSTEM SETTINGS ................................................................................................................................................................................................. 37 9.5 SERIAL COMM........................................................................................................................................................................................................38 9.6 FACE PARAMETERS................................................................................................................................................................................................39 9.7 AUTOTEST .............................................................................................................................................................................................................. 42 9.7.1 TEST FACE............................................................................................................................................................................................................................42 9.7.2 TEST FINGERPRINT SENSOR......................................................................................................................................................................................... 43 9.8 WIEGAND SETUP ................................................................................................................................................................................................... 43 10 DEVICE MANAGEMENT ......................................................................................................................... 45 10.1 DEVICE MANAGEMENT ...................................................................................................................................................................................... 45 10.2 UPDATA FIRMWARE............................................................................................................................................................................................46 10.3 CHANGE PASSWORD ..........................................................................................................................................................................................47 10.4 OPERATION LOG.................................................................................................................................................................................................48 10.5 DOWNLOAD FIRMWARE LOGS..........................................................................................................................................................................49 11 .................................................................................................................................................................49 11 SYSTEM INFORMATION .........................................................................................................................50 12 CONNECT TO ZKBIO CVSECURITY SOFTWARE .................................................................................... 52 12.1 SET THE COMMUNICATION ADDRESS.............................................................................................................................................................. 52 12.2 ADD DEVICE ON THE SOFTWARE......................................................................................................................................................................53 12.3 MOBILE CREDENTIAL ....................................................................................................................................................................................54 APPENDIX 1 .................................................................................................................................................58 REQUIREMENTS OF LIVE COLLECTION AND REGISTRATION OF VISIBLE LIGHT FACE IMAGES.............................................................................58 REQUIREMENTS FOR VISIBLE LIGHT DIGITAL FACE IMAGE DATA...........................................................................................................................59 APPENDIX 2 .................................................................................................................................................60 PRIVACY POLICY........................................................................................................................................................................................................... 60 ECO-FRIENDLY OPERATION.........................................................................................................................................................................................62 P a g e | 6 Copyright2022 ZKTECO CO., LTD. All rights reserved. ProMA Series User Manual 1 Instruction for Use 1.1 How to scan the QR code?
fundamentals. scanner. Before getting into the Device features and its functions, it is recommended to be familiar to the below Open the Mobile Credential of ZKBioSecurity App and parallel the phone screen to the device QR code Note: Place your phone within 15 to 50cm of the device (distance depends on the size of the phone screen), do not block the device QR code scanner and QR code in the phone screen. 1.2 Standing Position, Posture and Facial Expression The recommended distance The distance between the device and a user whose height is in a range of 1.55m to 1.85m is recommended to be 0.3 to 2.5m. Users may slightly move forward or backward to improve the quality of facial images captured. P a g e | 7 Copyright2022 ZKTECO CO., LTD. All rights reserved. ProMA Series User Manual Recommended Standing Posture and Facial Expression Standing Posture Facial Expression Note: Please keep your facial expression and standing posture natural while enrolment or verification. 1.3 Face Registration Try to keep the face in the centre of the screen during registration. Please face towards the camera and stay still during face registration. The screen should look like this:
P a g e | 8 Copyright2022 ZKTECO CO., LTD. All rights reserved. ProMA Series User Manual Correct face registration and authentication method Recommendation for registering a face When registering a face, maintain a distance of 40cm to 80cm between the device and the face. may fail. Be careful not to change your facial expression. (Smiling face, drawn face, wink, etc.) If you do not follow the instructions on the screen, the face registration may take longer or Be careful not to cover the eyes or eyebrows. Do not wear hats, masks, sunglasses, or eyeglasses. Be careful not to display two faces on the screen. Register one person at a time. It is recommended for a user wearing glasses to register both faces with and without glasses. Recommendation for authenticating a face Ensure that the face appears inside the guideline displayed on the screen of the device. If the glasses have been changed, authentication may fail. If the face without glasses has been registered, authenticate the face without glasses further. If the face with glasses has been registered, authenticate the face with the previously worn glasses. If a part of the face is covered with a hat, a mask, an eye patch, or sunglasses, authentication may fail. Do not cover the face, allow the device to recognize both the eyebrows and the face. 1.4 Finger Placement Recommended fingers: Index, middle, or ring fingers. Avoid using the thumb or pinky, as they are difficult to accurately tap onto the fingerprint reader. Note: Please use the correct method when pressing your fingers onto the fingerprint reader for registration and identification. P a g e | 9 Copyright2022 ZKTECO CO., LTD. All rights reserved. ProMA Series User Manual 2 Appearance 2.1 ProMA-QR No. 1 2 3 4 5 6 7 8 9 Description Microphone Camera 2" Display Screen Card Reading Area Doorbell Button QR Code Scanner Flash Speaker Reset P a g e | 10 Copyright2022 ZKTECO CO., LTD. All rights reserved. ProMA Series 2.2 ProMA User Manual No. 1 2 3 4 5 6 7 8 9 Description Microphone Camera 2" Display Screen Card Reading Area Doorbell Button Fingerprint Sensor Flash Speaker Reset P a g e | 11 Copyright2022 ZKTECO CO., LTD. All rights reserved. ProMA Series User Manual 2.3 ProMA-RF No. 1 2 3 4 5 6 7 8 Description Microphone Camera 2" Display Screen Card Reading Area Doorbell Button Flash Speaker Reset P a g e | 12 Copyright2022 ZKTECO CO., LTD. All rights reserved. ProMA Series User Manual 2.4 Terminal and Wiring Description 2.4.1 Terminal Description Interface Description 12V GND GND NO1 COM1 NC1 12V Power In Lock P a g e | 13 Copyright2022 ZKTECO CO., LTD. All rights reserved. ProMA Series User Manual AUX1 SEN1 BUT1 AL-
AL+
BELL-
BELL+
12V-OUT GND WD1-OUT WD0-OUT 485B 485A IWD1 IWD0 GND TX+
TX-
RX+
RX-
Auxiliary Input Sensor Exit Button Alarm Bell Power Out Wiegand Out RS485 Wiegand In Network Interface P a g e | 14 Copyright2022 ZKTECO CO., LTD. All rights reserved. ProMA Series User Manual 2.5 Wiring Description 2.5.1 Power Connection To share the devices power with other devices, use a power supply with higher current ratings. Recommended power supply Rating of 12V and 3A 2.5.2 Lock Relay Connection The system supports both Normally Opened Lock and Normally Closed Lock. The NO Lock (normally opened when powered) is connected with NO1 and COM1 terminals, and the NC Lock (normally closed when powered) is connected with NC1 and COM1 terminals. The power can be shared with the lock or can be used separately for the lock, as shown in the example with NC Lock below:
P a g e | 15 Copyright2022 ZKTECO CO., LTD. All rights reserved. ProMA Series User Manual 2.5.3 Door Sensor, Exit Button, Alarm and Auxiliary Connection 2.5.4 Wiegand Connection The Wiegand card reader connects to the top 4 pins of the Wiegand terminal and the last two pins are used by the Access Controller, as shown in the following figure. It sends the credentials to the device via Wiegand communication. P a g e | 16 Copyright2022 ZKTECO CO., LTD. All rights reserved. ProMA Series User Manual 2.5.5 RS485 Connection shown in the figure below. The RS485 lets users connect to multiple readers to the device. RS485 can be connected to the terminal, as 2.5.6 Ethernet Connection Connect the device and computer software over an Ethernet cable. An example is shown below:
Note: In LAN, the IP addresses of the server (PC) and the device must be in the same network segment when connecting to WebServer. P a g e | 17 Copyright2022 ZKTECO CO., LTD. All rights reserved. ProMA Series User Manual 3 Installation 3.1 Installation Environment Please refer to the following recommendations for installation. 3.2 Device Installation ProMA series installations are the same, the following is an example of ProMA. 1. Attach the mounting template sticker to the wall, and drill holes according to the mounting paper. 2. Fix the backplate on the wall using wall mounting screws. 3. Attach the device to the backplate. 4. Fasten the device to the backplate with a security screw. P a g e | 18 Copyright2022 ZKTECO CO., LTD. All rights reserved. ProMA Series User Manual P a g e | 19 Copyright2022 ZKTECO CO., LTD. All rights reserved. ProMA Series User Manual 4 Standby Interface After connecting the power supply, the following standby interface is displayed:
The device has a built-in IP address, which can be used for device communication, connection to WebServer and ZKBio CVSecurity software, etc. Note: The device uses a 2 display screen, which does not support touch operation and is only used to display status and verification information. All operations such as device information, communication settings, user management and system settings are operated and set up on WebServer. P a g e | 20 Copyright2022 ZKTECO CO., LTD. All rights reserved. ProMA Series User Manual 5 Verification Mode 5.1 QR Code Verification all the QR code data in the device. In this verification mode, the device compares the QR code image collected by the QR code collector with Tap [Mobile Credential] on the ZKBioSecurity App, and a QR code will appear, which includes employee ID and card number (static QR code only includes card number) information. The QR code can replace a physical card on a specific device to achieve contactless authentication. Please refer to 12.4 Mobile Credential. 5.2 Facial Verification In this verification mode, the device compares the collected facial images with all face data registered in the device. The following is the pop-up prompt of a successful comparison result. P a g e | 21 Copyright2022 ZKTECO CO., LTD. All rights reserved. ProMA Series User Manual 5.3 Card Verification The Card Verification mode compares the card number in the card induction area with all the card number data registered in the device; The following is the card verification screen. 5.4 Fingerprint Verification This method compares the fingerprint of the user that is being pressed onto the fingerprint reader with all the fingerprint data that is pre- stored in the device. To enter fingerprint identification mode, simply tap your finger on the fingerprint reader. P a g e | 22 Copyright2022 ZKTECO CO., LTD. All rights reserved. ProMA Series User Manual 6 Login WebServer A user can open the web application to set the relevant parameters of the device. 1. Press and hold the Doorbell Button of the device until the IP pops up. 2. Open a browser to enter the address to log in to the WebServer, the address is https:// Serial IP Address:1443. For example: https://192.168.1.201:1443. Note: The Serial IP Address of the device for communication can be modified, for details please refer to Communication Settings. P a g e | 23 Copyright2022 ZKTECO CO., LTD. All rights reserved. ProMA Series User Manual 3. Enter the WebServer account and password, the default account is: admin, password: admin@123. Note:
Registration. 1. After logging in for the first time, users need to change their original password and log in again before they can use it, please refer to 10.3 Change Password. 2. In order to retrieve the password easily, please register a super admin first, please refer to 8.1 User P a g e | 24 Copyright2022 ZKTECO CO., LTD. All rights reserved. ProMA Series User Manual 7 Forgot Password Method 1 (When there is a super admin):
are as follows:
1. Click the icon on the login interface. If you forgot the password of WebServer, you can reset it by the registered super admin. The detailed steps 2. On the pop-up page, enter the relevant information of the super admin user as prompted. P a g e | 25 Copyright2022 ZKTECO CO., LTD. All rights reserved. ProMA Series User Manual 3. After a successful reset, enter the default account and password (account: admin, password:
admin@123) on the login interface to log in. 4. For security reasons, please change your password after successfully logging in. Note: The super admin must exist. P a g e | 26 Copyright2022 ZKTECO CO., LTD. All rights reserved. ProMA Series User Manual Method 2 (When there is not a super admin):
If the network of the device is normal and ZKBio CVSecurity has been connected, you can reset the password by sending the super admin account and password from the server. 1. Click Personnel > Person > New on the ZKBio CVSecurity Server. 2. After registering the information of the super admin, click Save and New. 3. Click Access > Device > Control > Synchronize All Data to Devices to synchronize all the data to the device including the new users. Note: For other specific operations, please refer ZKBio CVSecurity V6600 User Manual. 4. After the data synchronization is successful, you can reset the password with the newly registered super admin. The operation steps are the same as method 1. Method 3:
If the device has not registered a super admin and cannot connect to the server, please contact our after-
sales technicians to help retrieve the password. P a g e | 27 Copyright2022 ZKTECO CO., LTD. All rights reserved. ProMA Series User Manual 8 User Management 8.1 User Registration 8.1.1 Basic Information Click All Users on the WebServer. In this interface, you can register the User ID, Name, Rights, Password, Card Number and Access Control Role of the new user, click Confirm to save. Function Name Description User ID Name The user ID may contain 1 to 14 characters by default. It can be numbers, letters, symbols, etc. A name can be up to 63 characters. P a g e | 28 Copyright2022 ZKTECO CO., LTD. All rights reserved. ProMA Series User Manual Rights Set the role for the user as either Normal User or Super Admin. Super Admin: The Super Admin owns all management privileges in the WebServer. Normal User: If the Super Admin is already registered in the WebServer, then the Normal Users will not have the privileges to manage the system and can only access authentication verifications. Password Set the user's registration password. Card Number Enter the card number manually, after registering the user's card number, the user can swipe the card for verification. Access Control Role The Access Control Role sets the door access privilege for each user, new users will be added to Group 1 by default, which can be reassigned to other required groups. The system supports up to 10 access control groups. Note:
1. During the initial registration, you can modify your ID; you cannot be modifying the registered ID once after the successful registration. 2. If the message "Setup failed!" pops up, you must choose a different User ID because the one you entered already exists. 8.1.2 Online Registration In this interface, you can register the Users Fingerprint, Face and Card Number. The verification mode can only be registered after the basic information is confirmed. P a g e | 29 Copyright2022 ZKTECO CO., LTD. All rights reserved. ProMA Series User Manual Register Fingerprint In the current interface, behind the fingerprint bar, click Register, and the device will display the fingerprint registration interface in real time, press your finger onto the fingerprint sensor of the device, and follow the instructions to complete the registration. For fingerprint pressing operation, please refer to 1.4 Finger Placement. Register Face In the current interface, behind the face bar, click Register, and the device will display the face registration interface in real time. P a g e | 30 Copyright2022 ZKTECO CO., LTD. All rights reserved. ProMA Series User Manual Please face towards the camera and position your face inside the white guiding box and stay still during face registration. A progress bar shows up while registering the face and Enrolled Successfully is displayed until the registration completes. If the face is registered already then, the Duplicated Face message shows up. The registration interface is as follows:
Note: While registering a face, the system automatically captures a picture as the profile photo. If you do not register a profile photo, the system automatically sets the picture captured during registration as the default photo. Card Number card will be successful. In the current interface, behind the card number, click Register, and the device will display the card registration interface in real time, swipe the card underneath the card reading area. The registration of the P a g e | 31 Copyright2022 ZKTECO CO., LTD. All rights reserved. ProMA Series User Manual 8.2 Search for Users Click All Users on the WebServer, click the search bar to enter the required retrieval keyword (where the keyword may be the user ID, surname or full name) and the system will search for the related user information. 8.3 Edit User On the All Users interface, select the required user from the list and click Change User Info to edit the user information. P a g e | 32 Copyright2022 ZKTECO CO., LTD. All rights reserved. ProMA Series User Manual Note: The process of editing the user information is the same as that of adding a new user, except that the User ID cannot be modified. The process in detail refers to 8.1 User Registration. 8.4 Delete User On the All Users interface, select the required user from the list and click Delete User to delete the user. Here individual deletion and batch deletion is available. P a g e | 33 Copyright2022 ZKTECO CO., LTD. All rights reserved. ProMA Series User Manual 9 Advanced Settings 9.1 Communication Settings Click COMM. on the WebServer. Change the IP address of the device as needed, click Confirm to save, and the device will automatically synchronize the IP information. Function Name Description Select whether to obtain the IP Address by automatically. The default IP address is 192.168.1.201. It can be modified according to network availability. Subnet Mask The default Subnet Mask is 255.255.255.0. It can be modified according to network availability. The Default Gateway address is 0.0.0.0. It can be modified according to network availability. The default DNS address is 0.0.0.0. It can be modified according to network availability. Automatic Acquisition IP Address Gateway DNS Note: After the IP address of the device is changed successfully, you need to log out of the currently WebServer and log in again to the IP address you just changed to connect to the device. For WebServer login details, please refer to Login WebServer. P a g e | 34 Copyright2022 ZKTECO CO., LTD. All rights reserved. ProMA Series User Manual 9.2 Cloud Server Setting Click Cloud Service Setup on the WebServer. Communication Address. Cloud Server Setup was used to connect to the ZKBio CVSecurity software, please refer to 12.1 Set the Enable Domain Name Disable Domain Name HTTPS Function Name Description Server Address Once this function is enabled, the domain name mode http://... will be used, such as http://www.XYZ.com, while XYZ denotes the domain name (when this mode is turned ON). Server Address IP address of the ADMS server. Server Port Port used by the ADMS server. on HTTP, Based authentication ensure the security of the transmission process. transmission encryption and identity Enable Proxy Server Setup When you choose to enable the proxy, you need to set the IP address and port number of the proxy server. P a g e | 35 Copyright2022 ZKTECO CO., LTD. All rights reserved. ProMA Series User Manual 9.3 Date Setup Click Date Setup on the WebServer. Click Manual to manually set the date and time and click Confirm to save. Select Open or Close the Daylight Saving Mode function. If opened, set the Daylight Saving Time and End of Daylight Saving. P a g e | 36 Copyright2022 ZKTECO CO., LTD. All rights reserved. ProMA Series User Manual 9.4 System Settings Click System on the WebServer. It helps to set related system parameters to optimize the accessibility of the device. Function Name Description Volume Adjust the volume of the device which can be set between 0 and 100. Language Select the language of the WebServer and device. Alphanumeric User ID User ID Masking Display Verification Name Display Verification Mode Note:
Enable/Disable the alphanumeric as User ID. When enabled, and then the user is successfully compared and verified, the User ID in the displayed verification result will be replaced with an * to achieve secure protection of sensitive private data. Set whether to display the username in the verification result interface. Set whether to display the verification mode in the verification result interface. 1. After selecting the language and clicking Confirm, the device will automatically reboot and display the changed language. 2. Then WebServer will not display the switched language until the device reboots and log in again. P a g e | 37 Copyright2022 ZKTECO CO., LTD. All rights reserved. ProMA Series User Manual 9.5 Serial Comm Click Serial Comm on the WebServer. Function Name Description No Using: No communication with the device through the serial port. RS485 (PC): Communicate with the device through the RS485 serial port. Serial Port Master Unit: When RS485 is used as the function of the "Master unit", it can be connected to a card reader. DM10: Communicate with the device through the DM10 serial port. There are 5 baudrate options at which the data communicates with the PC. They are: 115200 (default), 57600, 38400, 19200 and 9600. Baudrate The higher the baudrate, the faster is the communication speed, but also less reliable. Hence, a higher baudrate can be used when the communication distance is short; when the communication distance is long, choosing a lower baudrate is more reliable. P a g e | 38 Copyright2022 ZKTECO CO., LTD. All rights reserved. ProMA Series User Manual 9.6 Face Parameters Click Face on the WebServer. Function Name Description 1:N Threshold Value Under face verification mode, the verification will only be successful when the similarity between the acquired facial image and all registered facial templates is greater than the set value. The valid value ranges from 0 to 100. The higher the thresholds, the lower the is misjudgment recommended to set the default value of 74. the rejection rate, and vice versa. the higher rate, It 1:N Match Threshold for Masked People The higher the thresholds, the lower the misjudgment rate, the higher the rejection rate, and vice versa. It is recommended to set the default value of 68. P a g e | 39 Copyright2022 ZKTECO CO., LTD. All rights reserved. ProMA Series User Manual 1:1 Threshold Value Face Enrollment Threshold Under 1:1 verification mode, the verification will only be successful when the similarity between the acquired facial image and the users facial templates enrolled in the device is greater than the set value. The valid value ranges from 0 to 100. The higher the thresholds, the lower the misjudgment rate and the higher is the rejection rate, and vice versa. It is recommended to set the default value of 63. During face enrolment, 1: N comparison is used to determine whether the user has already registered before. When the similarity between the acquired facial image and all registered facial templates is greater than this threshold, it indicates that the face has already been registered. The pitch angle tolerance of a face for facial registration and comparison. Face Pitch Angle If a faces pitch angle exceeds this set value, it will be filtered by the algorithm, i.e. ignored by the terminal thus no registration and comparison interface will be triggered. Face Rotation Angle The rotation angle tolerance of a face for facial template registration and comparison. If a faces rotation angle exceeds this set value, it will be filtered by the algorithm, i.e. ignored by the terminal thus no registration and comparison interface will be triggered. Image Quality Image quality for facial registration and comparison. The higher the value, the clearer the image requires. Minimum Face Size Required for facial registration and comparison. If the minimum size of the captured figure is smaller than this set value, then it will be filtered off and not recognized as a face. This value can be understood as the face comparison distance. The farther the person is, the smaller the face is, and the smaller the face pixel will be obtained by the algorithm. Therefore, adjusting this parameter can adjust the furthest comparison distance of faces. When the value is 0, the face comparison distance is not limited. LED Light Triggered Value This value controls the on and off of the LED light. The larger the value, the more frequently the LED light will be turned on. Motion Detection Sensitivity It is to set the value for the amount of change in a cameras field of view, which is known as potential motion detection that wakes up the terminal from standby to the comparison interface. The larger the value, the more sensitive the system would be, i.e. if a larger value is set, the comparison interface is much easier and the motion detection frequently triggered. P a g e | 40 Copyright2022 ZKTECO CO., LTD. All rights reserved. ProMA Series User Manual Anti-flicker Mode Used when WDR is turned off. This helps reduce flicker when the devices screen flashes at the same frequency as the light. Live Detection Live Detection Threshold Detecting the spoof attempt using visible light images to determine if the provided biometric source sample is really a person (a live human being) or a false representation. Facilitates to judge whether the captured visible image is really a person (a live human being). The larger the value, the better the anti-spoofing performance using visible light. Anti-spoofing Using NIR Using near-infrared spectra imaging to identify and prevent fake photos and video attacks. Binocular Live Detection Threshold Facilitates to judge whether the captured visible image is really a person (a live human being). The larger the value, the better the anti-spoofing performance using visible light. WDR Save Photo as Template Wide Dynamic Range (WDR), which balances light and extends image visibility for surveillance videos under high contrast lighting scenes and improves object identification under bright and dark environments. Select whether to save the registered photo. Note:
Improper adjustment of the exposure and quality parameters may severely affect the performance of the device. Please adjust the exposure parameter only under the guidance of the after-
sales service personnel of our company. P a g e | 41 Copyright2022 ZKTECO CO., LTD. All rights reserved. ProMA Series User Manual 9.7 Autotest Click Autotest on the WebServer. It enables the system to automatically test whether the functions of various modules are working normally. 9.7.1 Test Face exit the test. Click Test Mode, the ProMA device will display the Test Face interface in real time, click End of Testing to After opening the test mode, the upper left corner of the device screen will display the value of the face in real time, the higher the value, the better quality of the face. P a g e | 42 Copyright2022 ZKTECO CO., LTD. All rights reserved. ProMA Series User Manual 9.7.2 Test Fingerprint Sensor Click Start, the ProMA device will display the Test Fingerprint interface in real time, click End to exit the test. 9.8 Wiegand Setup Click Wiegand Setup on the WebServer. It is used to set the Wiegand input and output parameters. P a g e | 43 Copyright2022 ZKTECO CO., LTD. All rights reserved. ProMA Series User Manual Function Name Description Wiegand Format Its value can be 26 bits, 34 bits, 36 bits, 37 bits, 50 bits and 60 bits. Wiegand Bits The number of bits of the Wiegand data. ID Type Select between the User ID and card number. P a g e | 44 Copyright2022 ZKTECO CO., LTD. All rights reserved. ProMA Series User Manual 10 Device Management 10.1 Device Management Click Device Management on the WebServer. Function Name Description Clear Administrator Choose whether to change the super administrator into a normal user. Restart Choose whether to restart the device. Close SSH SSH is used to enter the background of the device for maintenance, choose whether to close the SSH. Reset function restores The Reset such as communication and system settings to the default factory settings
(this function does not clear registered user data). the device settings Note: After reset, the IP of the device is restored to the original 192.168.1.201, please refer to 9.1 Communication Settings to modify the IP. P a g e | 45 Copyright2022 ZKTECO CO., LTD. All rights reserved. ProMA Series User Manual Delete All Data To delete the information and attendance logs/access records of all registered users. 10.2 Updata Firmware Click Updata Firmware on the WebServer. Select an upgrade file and click Confirm to complete firmware upgrade operation. Note: If the upgrade file is needed, please contact our technical support. Firmware upgrade is not recommenced under normal circumstances. P a g e | 46 Copyright2022 ZKTECO CO., LTD. All rights reserved. ProMA Series User Manual 10.3 Change Password Click Change Password on the WebServer. In this interface, you can change the password and reset the password of WebServer. P a g e | 47 Copyright2022 ZKTECO CO., LTD. All rights reserved. ProMA Series User Manual 10.4 Operation Log Click Operation Log on the WebServer. by time. All the users operation records on the device or WebServer are saved. Users can search and download these logs P a g e | 48 Copyright2022 ZKTECO CO., LTD. All rights reserved. ProMA Series User Manual 10.5 Download Firmware Logs Click Operation Log on the WebServer. In this interface, you can select download the main, biometric, or dev.log. P a g e | 49 Copyright2022 ZKTECO CO., LTD. All rights reserved. ProMA Series User Manual 11 System Information Click System Information on the WebServer. In this interface, you can view the data capacity, device and firmware information of the current device. P a g e | 50 Copyright2022 ZKTECO CO., LTD. All rights reserved. ProMA Series User Manual Function Name Description Device Info Displays the device's name, serial number, MCU version, MAC address, fingerprint and face algorithm version information, platform and manufacturer information. Device Capacity Displays the current device's user storage, password, fingerprint, card and face storage, administrators, attendance records, attendance and forbidden list photos. Firmware Information Displays the firmware version and other version information of the device. P a g e | 51 Copyright2022 ZKTECO CO., LTD. All rights reserved. ProMA Series User Manual 12 Connect to ZKBio CVSecurity Software 12.1 Set the Communication Address 1. Click COMM. > IP Setup in the WebServer to set the IP address and gateway of the device.
Note: The IP address should be able to communicate with the ZKBio CVSecurity server, preferably in the same network segment with the server address) 2. In the WebServer, click Cloud Server Setup to set the server address and server port. Server address: Set the IP address as of ZKBio CVSecurity server. Server port: Set the server port as of ZKBio CVSecurity (The default is 8808). P a g e | 52 Copyright2022 ZKTECO CO., LTD. All rights reserved. ProMA Series User Manual 3. Login to ZKBio CVSecurity software, click System > Communication Management >
Communication Monitor to set the ADMS Service Port, as shown in the figure below:
12.2 Add Device on the Software Add the device by searching. The process is as follows:
1 Click Access > Device > Search, to open the Search interface in the software. 2 Click Search, and it will prompt Searching. 3 After searching, the list and total number of access controllers will be displayed. P a g e | 53 Copyright2022 ZKTECO CO., LTD. All rights reserved. ProMA Series User Manual Click Add in operation column, a new window will pop-up. Select Icon type, Area, and Add to Level from each dropdown and click OK to add the device. 12.3 Mobile Credential given below:
After downloading and installing the App, the user needs to set the Server before login. The steps are 1. In ZKBio CVSecurity > System > System Management > Parameters, set Enable QR Code to Yes, and select the QR code status according to the actual situation. The default is Dynamic, the valid time of the QR code can be set. 2. On the Server, choose System > Authority Management > Client Register to add a registered App client. P a g e | 54 Copyright2022 ZKTECO CO., LTD. All rights reserved. ProMA Series User Manual 3. Open the App on the Smartphone. On the login screen, tap Server Setting and type the IP Address or the Domain Name of the Server, and its Port Number. 4. Tap the QR Code icon to scan the QR code of the new App client. After the client is identified successfully, set the Client Name and tap Connection Test. 5. After the network is connected successfully, tap Save. P a g e | 55 Copyright2022 ZKTECO CO., LTD. All rights reserved. ProMA Series User Manual The Mobile Credential function is only valid when logging in as an employee, tap on Employee to switch to Employee Login screen. Enter the Employee ID and Password (Default: 123456) to login. 6. Tap Mobile Credential on the App, and a QR code will appear, which includes employee ID and card number (static QR code only includes card number) information. The QR code can replace a physical card on a specific device to achieve contactless authentication to open the door. P a g e | 56 Copyright2022 ZKTECO CO., LTD. All rights reserved. ProMA Series User Manual When using this function for the first time, the App will prompt to authorize the modification of screen brightness settings, as shown in the figure:
The QR code is automatically refreshed for every 30s, and it also supports manual refresh. Note: For other specific operations, please refer to ZKBioSecurity Mobile App User Manual. P a g e | 57 Copyright2022 ZKTECO CO., LTD. All rights reserved. ProMA Series User Manual Appendix 1 Light Face Images Requirements of Live Collection and Registration of Visible 1 It is recommended to perform registration in an indoor environment with an appropriate light source without underexposure or overexposure. 2 Do not shoot towards outdoor light sources like door or window or other strong light sources. 3 Dark-color apparels which are different from the background color are recommended for registration. 4 Please show your face and forehead, and do not cover your face and eyebrows with your hair. 5 It is recommended to show a plain facial expression. Smile is acceptable, but do not close your eyes, or incline your head to any orientation. Two images are required for persons with eyeglasses, one image with eyeglasses and one other without. 6 Do not wear accessories like scarf or mask that may cover your mouth or chin. 7 Please face right towards the capturing device, and locate your face in the image capturing area as shown in Image 1. 8 Do not include more than one face in the capturing area. 9 50cm - 80cm is recommended for capturing distance adjustable subject to body height. Image1 Face Capture Area P a g e | 58 Copyright2022 ZKTECO CO., LTD. All rights reserved. ProMA Series User Manual Requirements for Visible Light Digital Face Image Data The digital photo should be straight-edged, colored, half-portrayed with only one person, and the person should be uncharted and in casuals. Persons who wear eyeglasses should remain to put on eyeglasses for 200 pixels or above are recommended with no less than 115 pixels of distance. Neutral face or smile with eyes naturally open are recommended. Horizontal rotating angle should not exceed 10, elevation should not exceed 10, and depression angle Masks or colored eyeglasses are not allowed. The frame of the eyeglasses should not cover eyes and should not reflect light. For persons with thick eyeglasses frame, it is recommended to capture two images, one with eyeglasses and the other one without the eyeglasses. Complete face with clear contour, real scale, evenly distributed light, and no shadow. getting photo captured. Eye Distance Facial Expression Gesture and Angel should not exceed 10. Accessories Face Image Format Should be in BMP, JPG or JPEG. Data Requirement Should comply with the following requirements:
1 White background with dark-colored apparel. 2 24bit true color mode. 3 JPG format compressed image with not more than 20kb size. 4 Resolution should be between 358 x 441 to 1080 x 1920. 5 The vertical scale of head and body should be in a ratio of 2:1. 6 The photo should include the captured persons shoulders at the same horizontal level. 7 The captured persons eyes should be open and with clearly seen iris. 8 Neutral face or smile is preferred, showing teeth is not preferred. 9 The captured person should be clearly visible, natural in color, no harsh shadow or light spot or reflection in face or background. The contrast and lightness level should be appropriate. P a g e | 59 Copyright2022 ZKTECO CO., LTD. All rights reserved. ProMA Series User Manual Appendix 2 Privacy Policy Notice:
To help you better use the products and services of ZKTeco (hereinafter referred as we, our, or us) a smart service provider, we consistently collect your personal information. Since we understand the importance of your personal information, we took your privacy sincerely and we have formulated this privacy policy to protect your personal information. We have listed the privacy policies below to precisely understand the data and privacy protection measures related to our smart products and services. Before using our products and services, please read carefully and understand all the rules and provisions of this Privacy Policy. If you do not agree to the relevant agreement or any of its terms, you must stop using our products and services. I. Collected Information To ensure the normal product operation and help the service improvement, we will collect the information voluntarily provided by you or provided as authorized by you during registration and use or generated as a result of your use of services. 1. User Registration Information: At your first registration, the feature template (Fingerprint template/Face template/Palm template) will be saved on the device according to the device type you have selected to verify the unique similarity between you and the User ID you have registered. You can optionally enter your Name and Code. The above information is necessary for you to use our products. If you do not provide such information, you cannot use some features of the product regularly. 2. Product information: According to the product model and your granted permission when you install and use our services, the related information of the product on which our services are used will be collected when the product is connected to the software, including the Product Model, Firmware Version Number, Product Serial Number, and Product Capacity Information. When you connect your product to the software, please carefully read the privacy policy for the specific software. II. Product Security and Management 1. When you use our products for the first time, you shall set the Administrator privilege before performing specific operations. Otherwise, you will be frequently reminded to set the Administrator privilege when you enter the main menu interface. If you still do not set the P a g e | 60 Copyright2022 ZKTECO CO., LTD. All rights reserved. ProMA Series User Manual Administrator privilege after receiving the system prompt, you should be aware of the possible security risk (for example, the data may be manually modified). 2. All the functions of displaying the biometric information are disabled in our products by default. You can choose Menu > System Settings to set whether to display the biometric information. If you enable these functions, we assume that you are aware of the personal privacy security risks specified in the privacy policy. 3. Only your user ID is displayed by default. You can set whether to display other user verification information (such as Name, Department, Photo, etc.) under the Administrator privilege. If you choose to display such information, we assume that you are aware of the potential security risks (for example, your photo will be displayed on the device interface). 4. The camera function is disabled in our products by default. If you want to enable this function to take pictures of yourself for attendance recording or take pictures of strangers for access control, the product will enable the prompt tone of the camera. Once you enable this function, we assume that you are aware of the potential security risks. 5. All the data collected by our products is encrypted using the AES 256 algorithm. All the data uploaded by the Administrator to our products are automatically encrypted using the AES 256 algorithm and stored securely. If the Administrator downloads data from our products, we assume that you need to process the data and you have known the potential security risk. In such a case, you shall take the responsibility for storing the data. You shall know that some data cannot be downloaded for sake of data security. 6. All the personal information in our products can be queried, modified, or deleted. If you no longer use our products, please clear your personal data. III. Others You can visit https://www.zkteco.com/en/index/Index/privacy_protection.html to learn more about how we collect, use, and securely store your personal information. To keep pace with the rapid development of technology, adjustment of business operations, and to cope with customer needs, we will constantly deliberate and optimize our privacy protection measures and policies. Welcome to visit our official website at any time to learn our latest privacy policy. P a g e | 61 Copyright2022 ZKTECO CO., LTD. All rights reserved. ProMA Series User Manual Eco-friendly Operation The product's "eco-friendly operational period" refers to the time during which this product will not discharge any toxic or hazardous substances when used in accordance with the prerequisites in this manual. The eco-friendly operational period specified for this product does not include batteries or other components that are easily worn down and must be periodically replaced. The battery's eco-friendly operational period is 5 years. Hazardous or Toxic substances and their quantities Hazardous/Toxic Substance/Element Lead
(Pb) Mercury
(Hg) Cadmium
(Cd) Hexavalent Chromium
(Cr6+) Polybrominated Biphenyls
(PBB) Polybrominated Diphenyl Ethers
(PBDE) Component Name Chip Resistor Chip Capacitor Chip Inductor Diode ESD component Buzzer Adapter Screws indicates that the total amount of toxic content in all the homogeneous materials is below the limit as specified in SJ/T 113632006. indicates that the total amount of toxic content in all the homogeneous materials exceeds the limit as specified in SJ/T 113632006. Note: 80% of this products components are manufactured using non-toxic and eco-friendly materials. The components which contain toxins or harmful elements are included due to the current economic or technical limitations which prevent their replacement with non-toxic materials or elements. P a g e | 62 Copyright2022 ZKTECO CO., LTD. All rights reserved. FCC Warning:
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. ZKTeco Industrial Park, No. 32, Industrial Road, Tangxia Town, Dongguan, China. Phone : +86 769 - 82109991 Fax
: +86 755 - 89602394 www.zkteco.com Copyright 2022 ZKTECO CO., LTD. All Rights Reserved.
1 2 | Label & Label Location | ID Label/Location Info | 192.54 KiB | July 21 2022 |
4 ZK Tzca Smart Access Control Terminal Model: ProMA Input: DC 12V = 3A
(OVol-Te- (lal [11] -1k-1 (0k HO ORME GION Ot et Operating Humidity: 5% 93%
FCC ID: 2AJ9T-20501 Made in China re | i EF lg Hy ea ee ae ir rg i ;
N
1 2 | Confidentiality Letter | Cover Letter(s) | 103.02 KiB | July 21 2022 |
ZKTECO CO., LTD. Federal Communications Commission Authorization and Evaluation Division Confidentiality Request regarding application for certification of FCC ID: 2AJ9T-20501 Pursuant to Sections 0.457 and 0.459 of the Commissions Rules, we hereby request confidential treatment of information accompanying this application as outlined below:
Exhibit Type Block Diagram, Schematics, Operational Description, File Name Block Diagram Operation Description schematic diagram The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. Zhonglie Ge ZKTECO CO., LTD. Rev 11/20/07
1 2 | Power of Attorney Letter | Cover Letter(s) | 135.11 KiB | July 21 2022 |
ZKTECO CO., LTD. Federal Communications Commission Authorization and Evaluation Division 1435 Oakland Mills Road Columbia, MD 21046 Date: 2022-7-18 SUBJECT: FCC Application for FCC ID: 2AJ9T-20501 To Whom It May Concern:
We, the undersigned, hereby authorize Lisa Wang at EMTEK (SHENZHEN) CO., LTD. on our behalf, to apply to the Federal Communications Commission on our equipment. Any and all acts carried out by EMTEK (SHENZHEN) CO., LTD. on our behalf shall have the same effect as acts of our own. This is to advise that we are in full compliance with the Anti- Drug Abuse Act. We, the applicant, are not subject to a denial of federal benefits pursuant to Section 5301 of the Anti-Drug Act of 1988, 21 USC853a, and no party to the application is subject to a denial of federal benefits pursuant to that section. Zhonglie Ge/ Engineer ZKTECO CO., LTD.
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2022-07-21 | 13.56 ~ 13.56 | DXX - Part 15 Low Power Communication Device Transmitter | Original Equipment |
2 | 0.125 ~ 0.125 | DCD - Part 15 Low Power Transmitter Below 1705 kHz |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 2 | Effective |
2022-07-21
|
||||
1 2 | Applicant's complete, legal business name |
ZKTECO CO., LTD.
|
||||
1 2 | FCC Registration Number (FRN) |
0026008086
|
||||
1 2 | Physical Address |
No.32,Pingshan Industrial Avenue,Tangxia Town, Dongguan City,Guangdong Province,China 523728
|
||||
1 2 |
No.32,Pingshan Industrial Avenue,Tangxia Town
|
|||||
1 2 |
Dongguan, N/A
|
|||||
1 2 |
China
|
|||||
app s | TCB Information | |||||
1 2 | TCB Application Email Address |
T******@timcoengr.com
|
||||
1 2 | TCB Scope |
A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
|
||||
app s | FCC ID | |||||
1 2 | Grantee Code |
2AJ9T
|
||||
1 2 | Equipment Product Code |
20501
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 2 | Name |
Z******** G********
|
||||
1 2 | Title |
Engineer
|
||||
1 2 | Telephone Number |
+86 0******** Extension:
|
||||
1 2 | Fax Number |
+86 0********
|
||||
1 2 |
G******@ZKTECO.COM
|
|||||
app s | Technical Contact | |||||
n/a | ||||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 2 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 2 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 2 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 2 | Equipment Class | DXX - Part 15 Low Power Communication Device Transmitter | ||||
1 2 | DCD - Part 15 Low Power Transmitter Below 1705 kHz | |||||
1 2 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Smart Access Control Terminal | ||||
1 2 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 2 | Modular Equipment Type | Does not apply | ||||
1 2 | Purpose / Application is for | Original Equipment | ||||
1 2 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | Yes | ||||
1 2 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 2 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 2 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 2 | Firm Name |
EMTEK (Shenzhen) Co., Ltd.
|
||||
1 2 | Name |
L****** W****
|
||||
1 2 | Telephone Number |
86 75********
|
||||
1 2 |
w******@emtek.com.cn
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15C | 13.56000000 | 13.56000000 | |||||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
2 | 1 | 15C | 0.12500000 | 0.12500000 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC