all | frequencies |
|
|
|
|
exhibits | applications |
---|---|---|---|---|---|---|---|
manual | photos | label |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 2 |
|
user manual | Users Manual | 5.34 MiB | October 27 2020 | |||
1 2 |
|
internal photos | Internal Photos | 2.70 MiB | October 27 2020 | |||
1 2 |
|
External Photos | External Photos | 1.02 MiB | October 27 2020 | |||
1 2 |
|
label info & location | ID Label/Location Info | 286.13 KiB | October 27 2020 | |||
1 2 | Block Diagram | Block Diagram | October 27 2020 | confidential | ||||
1 2 |
|
Confidentiality Request | Cover Letter(s) | 117.59 KiB | October 27 2020 | |||
1 2 |
|
FCC SDOC | Attestation Statements | 146.10 KiB | October 27 2020 | |||
1 2 |
|
MCL | Cover Letter(s) | 83.81 KiB | October 27 2020 | |||
1 2 |
|
MPE | RF Exposure Info | 58.83 KiB | October 27 2020 | |||
1 2 | Operational Description | Operational Description | October 27 2020 | confidential | ||||
1 2 |
|
Power of Attorney Letter | Cover Letter(s) | 101.68 KiB | October 27 2020 | |||
1 2 | Schematics | Schematics | October 27 2020 | confidential | ||||
1 2 |
|
Test Report | Test Report | 1.45 MiB | October 27 2020 | |||
1 2 |
|
Test setup photo | Test Setup Photos | 320.70 KiB | October 27 2020 |
1 2 | user manual | Users Manual | 5.34 MiB | October 27 2020 |
Product Name and Model Number User Manual User Manual Smart Access Control Terminal Date: July 2020 Doc Version: 1.0 English Thank you for choosing our product. Please read the instructions carefully before operation. Follow these instructions to ensure that the product is functioning properly. The images shown in this manual are for illustrative purposes only. For further details, please visit our Companys website www.zkteco.com. P a g e | 1 Copyright2020 ZKTECO CO., LTD. All rights reserved. 4-inch Visible Light Terminal User Manual Copyright 2020 ZKTECO CO., LTD. All rights reserved. Without the prior written consent of ZKTeco, no portion of this manual can be copied or forwarded in any way or form. All parts of this manual belong to ZKTeco and its subsidiaries (hereinafter the "Company" or
"ZKTeco"). is a registered trademark of ZKTeco. Other trademarks involved in this manual are owned by Trademark their respective owners. Disclaimer This manual contains information on the operation and maintenance of the ZKTeco equipment. The copyright in all the documents, drawings, etc. in relation to the ZKTeco supplied equipment vests in and is the property of ZKTeco. The contents hereof should not be used or shared by the receiver with any third party without express written permission of ZKTeco. The contents of this manual must be read as a whole before starting the operation and maintenance of the supplied equipment. If any of the content(s) of the manual seems unclear or incomplete, please contact ZKTeco before starting the operation and maintenance of the said equipment. It is an essential pre-requisite for the satisfactory operation and maintenance that the operating and maintenance personnel are fully familiar with the design and that the said personnel have received thorough training in operating and maintaining the machine/unit/equipment. It is further essential for the safe operation of the machine/unit/equipment that personnel has read, understood and followed the safety instructions contained in the manual. In case of any conflict between terms and conditions of this manual and the contract specifications, drawings, instruction sheets or any other contract-related documents, the contract conditions/documents shall prevail. The contract specific conditions/documents shall apply in priority. ZKTeco offers no warranty, guarantee or representation regarding the completeness of any information contained in this manual or any of the amendments made thereto. ZKTeco does not extend the warranty of any kind, including, without limitation, any warranty of design, merchantability or fitness for a particular purpose. ZKTeco does not assume responsibility for any errors or omissions in the information or documents which are referenced by or linked to this manual. The entire risk as to the results and performance obtained from using the information is assumed by the user. ZKTeco in no event shall be liable to the user or any third party for any incidental, consequential, indirect, special, or exemplary damages, including, without limitation, loss of business, loss of profits, business interruption, loss of business information or any pecuniary loss, arising out of, in connection with, or P a g e | 1 Copyright2020 ZKTECO CO., LTD. All rights reserved. 4-inch Visible Light Terminal User Manual relating to the use of the information contained in or referenced by this manual, even if ZKTeco has been advised of the possibility of such damages. This manual and the information contained therein may include technical, other inaccuracies or typographical errors. ZKTeco periodically changes the information herein which will be incorporated into new additions/amendments to the manual. ZKTeco reserves the right to add, delete, amend or modify the information contained in the manual from time to time in the form of circulars, letters, notes, etc. for better operation and safety of the machine/unit/equipment. The said additions or amendments are meant for improvement /better operations of the machine/unit/equipment and such amendments shall not give any right to claim any compensation or damages under any circumstances. ZKTeco shall in no way be responsible (i) in case the machine/unit/equipment malfunctions due to any non-compliance of the instructions contained in this manual (ii) in case of operation of the machine/unit/equipment beyond the rate limits (iii) in case of operation of the machine and equipment in conditions different from the prescribed conditions of the manual. The product will be updated from time to time without prior notice. The latest operation procedures and relevant documents are available on http://www.zkteco.com If there is any issue related to the product, please contact us. ZKTeco Headquarters Address ZKTeco Industrial Park, No. 26, 188 Industrial Road, Tangxia Town, Dongguan, China. Phone
+86 769 - 82109991 Fax
+86 755 - 89602394 For business related queries, please write to us at: sales@zkteco.com. To know more about our global branches, visit www.zkteco.com. P a g e | 2 Copyright2020 ZKTECO CO., LTD. All rights reserved. 4-inch Visible Light Terminal User Manual About the Company ZKTeco is one of the worlds largest manufacturer of RFID and Biometric (Fingerprint, Facial, Finger-vein) readers. Product offerings include Access Control readers and panels, Near & Far-range Facial Recognition Cameras, Elevator/floor access controllers, Turnstiles, License Plate Recognition (LPR) gate controllers and Consumer products including battery-operated fingerprint and face-reader Door Locks. Our security solutions are multi-lingual and localized in over 18 different languages. At the ZKTeco state-of-the-art 700,000 square foot ISO9001-certified manufacturing facility, we control manufacturing, product design, component assembly, and logistics/shipping, all under one roof. The founders of ZKTeco have been determined for independent research and development of biometric verification procedures and the productization of biometric verification SDK, which was initially widely applied in PC security and identity authentication fields. With the continuous enhancement of the development and plenty of market applications, the team has gradually constructed an identity authentication ecosystem and smart security ecosystem, which are based on biometric verification techniques. With years of experience in the industrialization of biometric verifications, ZKTeco was officially established in 2007 and now has been one of the globally leading enterprises in the biometric verification industry owning various patents and being selected as the National High-tech Enterprise for 6 consecutive years. Its products are protected by intellectual property rights. About the Manual This manual introduces the operations of 4-inch Visible Light Terminal Product. All figures displayed are for illustration purposes only. Figures in this manual may not be exactly consistent with the actual products. Features and parameters with are not available in all devices. P a g e | 3 Copyright2020 ZKTECO CO., LTD. All rights reserved. 4-inch Visible Light Terminal User Manual Document Conventions Conventions used in this manual are listed below:
GUI Conventions Convention Description For Software Bold font Used to identify software interface names e.g. OK, Confirm, Cancel Multi-level menus are separated by these brackets. For example, File > Create >
Folder. For Device Convention Description
Button or key names for devices. For example, press <OK>
Window names, menu items, data table, and field names are inside square brackets. For example, pop up the [New User] window Multi-level menus are separated by
[File/Create/Folder]. forwarding slashes. For example, Symbols Convention Description This implies about the notice or pays attention to, in the manual The general information which helps in performing the operations faster The information which is significant Care taken to avoid danger or mistakes The statement or event that warns of something or that serves as a cautionary example.
P a g e | 4 Copyright2020 ZKTECO CO., LTD. All rights reserved. 4-inch Visible Light Terminal User Manual Table of Contents 1 2 SAFETY MEASURES.............................................................................................................................. 7 2.1 2.2 2.3 2.4 2.5 2.6 INSTRUCTION FOR USE ....................................................................................................................... 8 STANDING POSITION, POSTURE AND FACIAL EXPRESSION .......................................................................................................................... 8 PALM REGISTRATION ...................................................................................................................................................................................... 9 FACE REGISTRATION ....................................................................................................................................................................................... 9 STANDBY INTERFACE .................................................................................................................................................................................... 10 VIRTUAL KEYBOARD ...................................................................................................................................................................................... 13 VERIFICATION MODE .................................................................................................................................................................................... 14 PALM VERIFICATION ................................................................................................................................................................................... 14 2.6.1 FACIAL VERIFICATION ................................................................................................................................................................................ 16 2.6.2 2.6.3 CARD VERIFICATION ................................................................................................................................................................................... 18 PASSWORD VERIFICATION ........................................................................................................................................................................ 20 2.6.4 2.6.5 COMBINED VERIFICATION ......................................................................................................................................................................... 22 3 MAIN MENU ....................................................................................................................................... 24 4.1 4 USER MANAGEMENT ......................................................................................................................... 25 USER REGISTRATION ..................................................................................................................................................................................... 25 4.1.1 USER ID AND NAME .................................................................................................................................................................................... 25 USER ROLE ..................................................................................................................................................................................................... 26 4.1.2 PALM ............................................................................................................................................................................................................... 26 4.1.3 4.1.4 FACE ................................................................................................................................................................................................................. 27 CARD................................................................................................................................................................................................................ 28 4.1.5 PASSWORD .................................................................................................................................................................................................... 29 4.1.6 4.1.7 USER PHOTO ................................................................................................................................................................................................. 29 4.1.8 ACCESS CONTROL ROLE ............................................................................................................................................................................ 30 SEARCH FOR USERS....................................................................................................................................................................................... 31 EDIT USER ...................................................................................................................................................................................................... 31 DELETE USER ................................................................................................................................................................................................. 32 4.2 4.4 4.3 5 USER ROLE ......................................................................................................................................... 33 6 COMMUNICATION SETTINGS............................................................................................................ 35 NETWORK SETTINGS ..................................................................................................................................................................................... 35 SERIAL COMM ............................................................................................................................................................................................... 37 PC CONNECTION .......................................................................................................................................................................................... 37 WIRELESS NETWORK ................................................................................................................................................................................ 38 CLOUD SERVER SETTING............................................................................................................................................................................... 40 WIEGAND SETUP ........................................................................................................................................................................................... 41 6.6.1 WIEGAND INPUT .......................................................................................................................................................................................... 41 6.6.2 WIEGAND OUTPUT ...................................................................................................................................................................................... 43 NETWORK DIAGNOSIS .................................................................................................................................................................................. 44 6.1 6.2 6.3 6.4 6.5 6.6 6.7 7 SYSTEM SETTINGS ............................................................................................................................. 45 DATE AND TIME ............................................................................................................................................................................................ 45 7.1 P a g e | 5 Copyright2020 ZKTECO CO., LTD. All rights reserved. 4-inch Visible Light Terminal User Manual 7.2 7.3 7.4 7.5 7.6 7.7 ACCESS LOGS SETTING ................................................................................................................................................................................. 46 FACE PARAMETERS ....................................................................................................................................................................................... 48 PALM PARAMETERS ...................................................................................................................................................................................... 50 FACTORY RESET............................................................................................................................................................................................. 51 USB UPGRADE .............................................................................................................................................................................................. 51 DEVICE TYPE SETTING ................................................................................................................................................................................... 52 8 PERSONALIZE SETTINGS ................................................................................................................... 53 INTERFACE SETTINGS .................................................................................................................................................................................... 53 VOICE SETTINGS ............................................................................................................................................................................................ 54 BELL SCHEDULES........................................................................................................................................................................................... 54 PUNCH STATES OPTIONS ............................................................................................................................................................................. 56 SHORTCUT KEY MAPPINGS .......................................................................................................................................................................... 57 8.1 8.2 8.3 8.4 8.5 9 DATA MANAGEMENT ........................................................................................................................ 59 DELETE DATA ................................................................................................................................................................................................ 59 9.1 10 ACCESS CONTROL .......................................................................................................................... 61 ACCESS CONTROL OPTIONS ........................................................................................................................................................................ 62 TIME RULE SETTING ...................................................................................................................................................................................... 63 HOLIDAYS ...................................................................................................................................................................................................... 65 COMBINED VERIFICATION ............................................................................................................................................................................. 66 ANTI-PASSBACK SETUP ................................................................................................................................................................................. 68 DURESS OPTIONS .......................................................................................................................................................................................... 69 10.1 10.2 10.3 10.4 10.5 10.6 11 USB MANAGER ............................................................................................................................... 70 USB DOWNLOAD ......................................................................................................................................................................................... 70 USB UPLOAD ................................................................................................................................................................................................ 71 11.1 11.2 ATTENDANCE SEARCH .................................................................................................................. 72 AUTOTEST ...................................................................................................................................... 74 SYSTEM INFORMATION ................................................................................................................. 75 CONNECT TO ZKBIOACCESS SOFTWARE ..................................................................................... 76 SET THE COMMUNICATION ADDRESS .......................................................................................................................................................... 76 ADD DEVICE ON THE SOFTWARE ................................................................................................................................................................. 77 ADD PERSONNEL ON THE SOFTWARE ......................................................................................................................................................... 78 15.1 15.2 15.3 APPENDIX 1 ............................................................................................................................................... 79 REQUIREMENTS OF LIVE COLLECTION AND REGISTRATION OF VISIBLE LIGHT FACE IMAGES .............................................................................. 79 REQUIREMENTS FOR VISIBLE LIGHT DIGITAL FACE IMAGE DATA .......................................................................................................................... 80 APPENDIX 2 ............................................................................................................................................... 81 STATEMENT ON THE RIGHT TO PRIVACY .................................................................................................................................................................. 81 ECO-FRIENDLY OPERATION ...................................................................................................................................................................................... 82 12 13 14 15 P a g e | 6 Copyright2020 ZKTECO CO., LTD. All rights reserved. 4-inch Visible Light Terminal User Manual 1 Safety Measures The following precautions are to keep the users safety and prevent any damage. Please read carefully before installation. 1. Read, follow, and retain instructions - All safety and operational instructions must be properly read and followed before bringing the device into service. 2. Do not ignore warnings - Adhere to all warnings on the unit and in the operating instructions. 3. Accessories - Use only manufacturer-recommended or product-sold accessories. Accessories not recommended by the manufacturer must not be used. 4. Precautions for the installation Do not place this device on an unstable stand or frame. It may fall and cause serious injury to persons and damage to the device. 5. Service - Do not try to service this unit yourself. Opening or removing covers may expose you to hazardous voltages or other hazards. 6. Damage requiring service - Disconnect the system from the main AC or DC power source and refer service personnel under the following conditions:
When cord or connection control is affected. When the liquid was spilled, or an item dropped into the system. If exposed to water and/or inclement weather (rain, snow, and more). If the system is not operating normally under operating instructions. Just change controls defined in operating instructions. Improper adjustment of other controls may result in damage and involve a qualified technician to return the device to normal operation. 7. Replacement parts - When replacement parts are needed, service technicians must only use replacement parts provided by the supplier. Unauthorized substitutes can result in a burn, shock, or other hazards. 8. Safety check - On completion of service or repair work on the unit, ask the service technician to perform safety checks to ensure proper operation of the unit. 9. Power sources - Operate the system only from the label's power source form. If the sort of power supply to use is unclear, call your dealer. 10. Lightning - External lightning conductors can be installed to protect against electrical storms. It stops power-ups destroying the system. The devices should be installed in areas with limited access. P a g e | 7 Copyright2020 ZKTECO CO., LTD. All rights reserved. 4-inch Visible Light Terminal User Manual 2 Instruction for Use fundamentals. Before getting into the Device features and its functions, it is recommended to be familiar to the below 2.1 Standing Position, Posture and Facial Expression The recommended distance The distance between the device and a user whose height is in a range of 1.55m-1.85m is recommended to be 0.3-2m. Users may slightly move forward or backward to improve the quality of facial images captured. Recommended Standing Posture and Facial Expression Standing Posture Facial Expression NOTE: Please keep your facial expression and standing posture natural while enrolment or verification. P a g e | 8 Copyright2020 ZKTECO CO., LTD. All rights reserved. 4-inch Visible Light Terminal User Manual 2.2 Palm Registration Make sure to keep space between your fingers. Place your palm in the palm multi-mode collection area, such that the palm is placed parallel to the device. NOTE: Place your palm within 30-50cm of the device. 2.3 Face Registration Try to keep the face in the centre of the screen during registration. Please face towards the camera and stay still during face registration. The screen should look like this:
P a g e | 9 Copyright2020 ZKTECO CO., LTD. All rights reserved. 4-inch Visible Light Terminal User Manual Correct face registration and authentication method Recommendation for registering a face When registering a face, maintain a distance of 40cm to 80cm between the device and the Be careful not to change your facial expression. (smiling face, drawn face, wink, etc.) If you do not follow the instructions on the screen, the face registration may take longer or Be careful not to cover the eyes or eyebrows. Do not wear hats, masks, sunglasses, or eyeglasses. Be careful not to display two faces on the screen. Register one person at a time. It is recommended for a user wearing glasses to register both faces with and without glasses. Recommendation for authenticating a face Ensure that the face appears inside the guideline displayed on the screen of the device. If the glasses have been changed, authentication may fail. If the face without glasses has been registered, authenticate the face without glasses further. If the face with glasses has been registered, authenticate the face with the previously worn glasses. If a part of the face is covered with a hat, a mask, an eye patch, or sunglasses, authentication may fail. Do not cover the face, allow the device to recognize both the eyebrows and the face. may fail. face. 2.4 Standby Interface After connecting the power supply, the following standby interface is displayed:
P a g e | 10 Copyright2020 ZKTECO CO., LTD. All rights reserved. 4-inch Visible Light Terminal User Manual Click to enter the User ID input interface. When there is no Super Administrator set in the device, tap to go to the menu. After setting the Super Administrator on the device, it requires the Super Administrators verification before entering the menu functions. NOTE: For the security of the device, it is recommended to register super administrator the first The punch state options can also be displayed and used directly on the standby interface. Click anywhere on the screen apart from the icons, and six shortcut keys appears on the screen, as time you use the device. shown in the figure below:
P a g e | 11 Copyright2020 ZKTECO CO., LTD. All rights reserved. 4-inch Visible Light Terminal User Manual Press the corresponding punch state key to select your current punch state, which is displayed in NOTE: The punch state options are off by default and need to be changed to other option in the "8.4 Punch States Options" in order to get the punch state options on the standby screen. green. P a g e | 12 Copyright2020 ZKTECO CO., LTD. All rights reserved. 4-inch Visible Light Terminal User Manual 2.5 Virtual Keyboard NOTE:
The device supports the input in Chinese language, English language, numbers, and symbols. Click [En] to switch to the English keyboard. Press [123] to switch to the numeric and symbolic keyboard. click [ABC] to return to the alphabetic keyboard. Click the input box, virtual keyboard appears. Click [ESC] to exit the virtual keyboard. P a g e | 13 Copyright2020 ZKTECO CO., LTD. All rights reserved. 4-inch Visible Light Terminal User Manual 2.6 Verification Mode 2.6.1 Palm Verification 1: N Palm Verification mode palm data in the device. In this verification mode, the device compares the palm image collected by the palm collector with all the The device automatically distinguishes between the palm and the face verification mode as the user places his/her palm in the scanning area. Then the palm image is collected by the palm collector, and the device matches the collected palm image with all the registered palm and returns an output. 1: 1 Palm Verification mode press [OK], as shown in image below. Click the button on the main screen to enter 1:1 palm verification mode and input the user ID and P a g e | 14 Copyright2020 ZKTECO CO., LTD. All rights reserved. 4-inch Visible Light Terminal User Manual If the user has registered face, card and password in addition to his/her palm, and the verification method is set to palm/ face/ card/ password verification, the following screen will appear. Select the icon to enter palm verification mode. Then place your palm for verification. P a g e | 15 Copyright2020 ZKTECO CO., LTD. All rights reserved. 4-inch Visible Light Terminal User Manual 2.6.2 Facial Verification 1:N Facial Verification In this verification mode, the device compares the collected facial images with all face data registered in the device. The following is the pop-up prompt of a successful comparison result. 1:1 Facial Verification In this verification mode, the device compares the face captured by the camera with the facial template related to the entered user ID. Press on the main interface and enter the 1:1 facial verification mode and enter the user ID and click [OK]. P a g e | 16 Copyright2020 ZKTECO CO., LTD. All rights reserved. 4-inch Visible Light Terminal User Manual If the user has registered palm, card and password in addition to his/her face, and the verification method is set to palm/ face/card/ password verification, the following screen will appear. Select the icon to enter the face verification mode. After successful verification, the prompt box displays "Successfully verified", as shown below:
If the verification is failed, it prompts Please adjust your position!. P a g e | 17 Copyright2020 ZKTECO CO., LTD. All rights reserved. 4-inch Visible Light Terminal User Manual 2.6.3 Card Verification 1:N Card Verification The 1:N Card Verification mode compares the card number in the card induction area with all the card number data registered in the device; The following is the card verification screen. 1:1 Card Verification The 1:1 Card Verification mode compares the card number in the card induction area with the number associated with the employee's User ID registered in the device. Press on the main interface to open the 1:1 card verification mode. Enter the user ID and click [OK]. P a g e | 18 Copyright2020 ZKTECO CO., LTD. All rights reserved. 4-inch Visible Light Terminal User Manual If the user has registered palm, face and password in addition to his/her card, and the verification method is set to palm/ face/card/ password verification, the following screen will appear. Select the icon to enter the card verification mode. P a g e | 19 Copyright2020 ZKTECO CO., LTD. All rights reserved. 4-inch Visible Light Terminal User Manual 2.6.4 Password Verification The device compares the entered password with the registered password by the given User ID. Click the button on the main screen to enter the 1:1 password verification mode. Then, input the user ID and press [OK]. If the user has registered palm, face and card in addition to password, and the verification method is set to palm/ face/ card/ password verification, the following screen will appear. Select the icon to enter password verification mode. P a g e | 20 Copyright2020 ZKTECO CO., LTD. All rights reserved. 4-inch Visible Light Terminal User Manual Input the password and press [OK]. Following are the display screen after a inputting a correct password and a wrong password respectively. P a g e | 21 Copyright2020 ZKTECO CO., LTD. All rights reserved. 4-inch Visible Light Terminal User Manual Verification is successful:
Verification is failed:
2.6.5 Combined Verification To increase security, this device offers the option of using multiple forms of verification methods. A total of 12 different verification combinations can be used, as shown below:
Combined Verification Symbol Definition Symbol Definition Explanation
or and This method compares the entered verification of a person with the related verification template previously stored to that Personnel ID in the Device. This method compares the entered verification of a person with all the verification template previously stored to that Personnel ID in the Device. P a g e | 22 Copyright2020 ZKTECO CO., LTD. All rights reserved. 4-inch Visible Light Terminal User Manual Procedure to set for Combined Verification Mode Combined verification requires personnel to register all the different verification method. Otherwise, employees will not be able to successfully verify the combined verification process. For instance, when an employee has registered only the data, but the Device verification mode is set as Face + Password, the employee will not be able to complete the verification process successfully. This is because the Device compares the scanned face template of the person with registered verification template (both the Face and the Password) previously stored to that Personnel ID in the Device. But as the employee has registered only the Face but not the Password, the verification will not get completed and the Device displays Verification Failed. P a g e | 23 Copyright2020 ZKTECO CO., LTD. All rights reserved. 4-inch Visible Light Terminal User Manual 3 Main Menu Press on the Standby interface to enter the Main Menu, the following screen will be displayed:
Function Description Menu Descriptions User Mgt. To Add, Edit, View, and Delete basic information of a User. User Role To set the permission scope of the custom role and enroller for the users, that is, the rights to operate the system. COMM. System To set the relevant parameters of Network, Serial Comm, PC Connection, Wireless Network, Cloud Server, Wiegand and Network Diagnosis. To set the parameters related to the system, including Date & Time, Access logs Setting, Palm, Face parameters, Reset to factory, USB upgrade and Device type Setting. Personalize This includes User Interface, Voice, Bell Schedules, Punch State Options and Shortcut Key Mappings settings. Data Mgt. To delete all relevant data in the device. Access Control To set the parameters of the lock and the relevant access control device including options like Time Rule, Holiday Settings, Combine verification, Anti-passback Setup, and Duress Option Settings. USB Manager To upload or download the specific data by a USB drive. Attendance Search To query the specified Event Logs, check Attendance Photos and Blocklist attendance photos. Autotest To automatically test whether each module functions properly, including the LCD Screen, Audio, Microphone, Camera, and real-time clock. System Info To view Data Capacity and Device and Firmware information of the current device. P a g e | 24 Copyright2020 ZKTECO CO., LTD. All rights reserved. 4-inch Visible Light Terminal User Manual 4 User Management 4.1 User Registration Click User Mgt. on the main menu. 4.1.1 User ID and Name Tap New User. Enter the User ID and Name. Notes:
1 A name can take up to 17 characters. 2 The user ID may contain 1-9 digits by default. 3 During the initial registration, you can modify your ID, which cannot be modified after registration. 4 If a message "Duplicated!" pops up, you must choose another ID as the enter User ID already exists. P a g e | 25 Copyright2020 ZKTECO CO., LTD. All rights reserved. 4-inch Visible Light Terminal User Manual 4.1.2 User Role Admin. On the New User interface, tap on User Role to set the role for the user as either Normal User or Super Super Admin: The Super Administrator owns all management privileges in the Device. Normal User: If the Super Admin is already registered in the Device, then the Normal Users will not have the privileges to manage the system and can only access authentication verifications. User Defined Roles: The Normal User can also be set with User Defined Role which are the custom roles that can be set to the Normal User. Note: If the selected user role is the Super Admin, the user must pass the identity authentication to access the main menu. The authentication is based on the authentication method(s) that the super administrator has registered. Please refer to 2.6 Verification Mode. 4.1.3 Palm Tap Palm in the New User interface to enter the palm registration page. Select the palm to be enrolled. Please place your palm inside the guiding box and keep it still while registering. A progress bar shows up while registering the palm and a Enrolled Successfully is displayed as If the palm is registered already then, the Duplicate Palm message shows up. The registration the progress bar completes. interface is as follows:
P a g e | 26 Copyright2020 ZKTECO CO., LTD. All rights reserved. 4-inch Visible Light Terminal User Manual 4.1.4 Face Tap Face in the New User interface to enter the face registration page. Please face towards the camera and position your face inside the white guiding box and stay still A progress bar shows up while registering the face and a Enrolled Successfully is displayed as If the face is registered already then the Duplicate Face message shows up. The registration during face registration. the progress bar completes. interface is as follows:
P a g e | 27 Copyright2020 ZKTECO CO., LTD. All rights reserved. 4-inch Visible Light Terminal User Manual 4.1.5 Card successful. interface is as follows:
Tap Card in the New User interface to enter the card registration page. On the Card interface, swiping card underneath the card reading area. The card registration will be If the card is registered already then the Duplicate Card message shows up. The registration P a g e | 28 Copyright2020 ZKTECO CO., LTD. All rights reserved. 4-inch Visible Light Terminal User Manual 4.1.6 Password Tap Password in the New User interface to enter the password registration page. On the Password interface, enter the required password and re-enter to confirm it and tap OK. If the re-entered password is different from the initially entered password, then the device prompts the message as "Password not match!", where the user needs to re-confirm the password again. Note: The password may contain 1 to 8 digits by default. 4.1.7 User photo Tap on User Photo in the New User interface to go to the User Photo registration page. P a g e | 29 Copyright2020 ZKTECO CO., LTD. All rights reserved. 4-inch Visible Light Terminal User Manual When a user registered with a photo passes the authentication, the registered photo will be displayed. Tap User Photo, the devices camera will open, then tap the camera icon to take a photo. The captured photo is displayed on the top left corner of the screen and the camera opens up again to take a new photo, after taking the initial photo. Note: While registering a face, the system automatically captures a photo as the user photo. If you do not register a user photo, the system automatically sets the photo captured while registration as the default photo. 4.1.8 Access Control Role The Access Control Role sets the door access privilege for each user. This includes the access group, verification mode and also facilitates to set the group access time-period. Tap Access Control Role > Access Group, to assign the registered users to different groups for better management. New users belong to Group 1 by default and can be reassigned to other groups. The device supports up to 99 Access Control groups. Tap Time Period, to select the time period to use. P a g e | 30 Copyright2020 ZKTECO CO., LTD. All rights reserved. 4-inch Visible Light Terminal User Manual 4.2 Search for Users On the Main Menu, tap User Mgt., and then tap All Users to search for a User. On the All Users interface, tap on the search bar on the users list to enter the required retrieval keyword (where the keyword may be the user ID, surname or full name) and the system will search for the related user information. 4.3 Edit User On All Users interface, tap on the required user from the list and tap Edit to edit the user information. P a g e | 31 Copyright2020 ZKTECO CO., LTD. All rights reserved. 4-inch Visible Light Terminal User Manual NOTE: The process of editing the user information is the same as that of adding a new user, except that the User ID cannot be modified when editing a user. The process in detail refers to "4 User Management". 4.4 Delete User Delete Operations On All Users interface, tap on the required user from the list and tap Delete to delete the user or a specific user information from the device. On the Delete interface, tap on the required operation and then tap OK to confirm the deletion. Delete User: Deletes all the user information (deletes the selected User as a whole) from the Device. Delete Face Only: Deletes the face information of the selected user. Delete Password Only: Deletes the password information of the selected user. Delete Palm Only: Deletes the palm information of the selected user. P a g e | 32 Copyright2020 ZKTECO CO., LTD. All rights reserved. 4-inch Visible Light Terminal User Manual 5 User Role User Role facilitates to assign some specific permissions to certain users, based on the requirement. On the Main menu, tap User Role, and then tap on the User Defined Role to set the user defined permissions. The permission scope of the custom role can be set up to 3 roles, that is, the custom operating scope of the menu functions of the user. On the User Defined Role interface, toggle Enable Defined Role to enable or disable the user defined role. Tap on Name and enter the custom name of the role. P a g e | 33 Copyright2020 ZKTECO CO., LTD. All rights reserved. 4-inch Visible Light Terminal User Manual Then, tap on Define User Role and select the required privileges to assign to the new role, and then tap on the Return button. sub-menus will be listed on its right. the list. During privilege assignment, the main menu function names will be displayed on the left and its First tap on the required Main Menu function name, and then select its required sub-menus from Note: If the User Role is enabled for the Device, tap on User Mgt. > New User > User Role to assign the created roles to the required users. But if there is no super administrator registered in the Device, then the device will prompt "Please enroll super admin first! when enabling the User Role function. P a g e | 34 Copyright2020 ZKTECO CO., LTD. All rights reserved. 4-inch Visible Light Terminal User Manual 6 Communication Settings Tap COMM. on the Main Menu to set the Ethernet PC connection, Cloud Server setting and Wiegand. 6.1 Network Settings When the device needs to communicate with a PC over the Ethernet, you need to configure network settings and ensure that the device and the PC are connecting to the same network segment. Tap Ethernet on the Comm. Settings interface to configure the settings. P a g e | 35 Copyright2020 ZKTECO CO., LTD. All rights reserved. 4-inch Visible Light Terminal User Manual Descriptions Function Description Function Name IP Address Subnet Mask Gateway DNS The default IP address is 192.168.1.201. It can be modified according to the network availability. The default Subnet Mask is 255.255.255.0. It can be modified according to the network availability. The default Gateway address is 0.0.0.0. It can be modified according to the network availability. The default DNS address is 0.0.0.0. It can be modified according to the network availability. TCP COMM. Port The default TCP COMM Port value is 4370. It can be modified according to the network availability. DHCP Dynamic Host Configuration Protocol is to dynamically allocate IP addresses for clients via server. Display in Status Bar Toggle to set whether to display the network icon on the status bar. P a g e | 36 Copyright2020 ZKTECO CO., LTD. All rights reserved. 4-inch Visible Light Terminal User Manual Serial Comm function facilitates to establish communication with the device through a serial port (RS485/
6.2 Serial Comm Master Unit). Tap Serial Comm. on the Comm. Settings interface. Function Description Function Name Descriptions no using: Do not communicate with the device through the serial port. Serial Port RS485(PC): Communicates with the device through RS485 serial port. Master Unit: When RS485 is used as the function of Master unit, the device will act as a master unit, and it can be connected to RS485 card reader. The rate at which the data is communicated with PC, there are 4 options of baud rate: 115200 (default), 57600, 38400, and 19200. Baud Rate The higher is the baud rate, the faster is the communication speed, but also the less reliable. Hence, a higher baud rate can be used when the communication distance is short; when the communication distance is long, choosing a lower baud rate would be more reliable. 6.3 PC Connection connected to the PC software. Comm Key facilitates to improve the security of data by setting the communication between the device and the PC. Once the Comm Key is set, its connection password must be provided before the device gets Tap PC Connection on the Comm. Settings interface to configure the communication settings. P a g e | 37 Copyright2020 ZKTECO CO., LTD. All rights reserved. 4-inch Visible Light Terminal User Manual Function Description Function Name Descriptions The default password is 0, which can be changed. The Comm Key can contain1-6 digits. Comm Key Device ID connected. Identity number of the device, which ranges between 1 and 254. If the communication method is RS232/RS485, you need to input this device ID in the software communication interface. 6.4 Wireless Network The device provides a Wi-Fi module, which can be built-in within the device mould or can be externally The Wi-Fi module enables data transmission via Wi-Fi (Wireless Fidelity) and establishes a wireless network environment. Wi-Fi is enabled by default in the device. If you don't need to use the Wi-Fi network, you can toggle the Wi-Fi to disable button. Tap Wireless Network on the Comm. Settings interface to configure the WiFi settings. Search the WIFI Network WIFI is enabled in the Device by default. Toggle on button to enable or disable WIFI. Once the Wi-Fi is turned on, the device will search for the available WIFI within the network range. Tap on the appropriate WiFi name from the available list, and input the correct password in the password interface, and then tap Connect to WIFI (OK). P a g e | 38 Copyright2020 ZKTECO CO., LTD. All rights reserved. 4-inch Visible Light Terminal User Manual WIFI Enabled: Tap on the required network from the searched network list. Tap on the password field to enter the password, and then tap on Connect to WIFI (OK). When the WIFI is connected successfully, the initial interface will display the Wi-Fi logo. Add WIFI Network Manually The WIFI can also be added manually if the required WIFI is not displayed on the list. Tap on Add WIFI Network to add the WIFI manually. On this interface, enter the WIFI network
(The added network must parameters. NOTE: After successfully adding the WIFI manually, follow the same process to search for the added WIFI name. Click here to view the process to search the WIFI network. P a g e | 39 Copyright2020 ZKTECO CO., LTD. All rights reserved. 4-inch Visible Light Terminal User Manual Advanced Setting On the Wireless Network interface , tap on Advanced to set the relevant parameters as required. Function Description Function Name DHCP IP Address Description Dynamic Host Configuration Protocol (DHCP) dynamically allocates IP addresses to network clients. If the DHCP is enabled, then the IP cannot be set manually. IP address for the WIFI network, the default is 0.0.0.0. It can be modified according to the network availability. Subnet Mask The default Subnet Mask of the WIFI network is 255.255.255.0. It can be modified according to the network availability. Gateway The default Gateway address is 0.0.0.0. Can be modified according to the network availability. 6.5 Cloud Server Setting Tap Cloud Server Setting on the Comm. Settings interface to connect with the ADMS server. P a g e | 40 Copyright2020 ZKTECO CO., LTD. All rights reserved. 4-inch Visible Light Terminal User Manual Function Description Function Name Description Server Address Once this function is enabled, the domain name mode http://... will be used, such as http://www.XYZ.com, while XYZ denotes the domain name (when this mode is turned ON). Server Address IP address of the ADMS server. Server Port Port used by the ADMS server. Enable Proxy Server When you choose to enable the proxy, you need to set the IP address and port number of the proxy server. Based on HTTP, authentication ensure the security of the transmission process. transmission encryption and identity Enable Domain Name Disable Domain Name HTTPS 6.6 Wiegand Setup To set the Wiegand input and output parameters. Tap Wiegand Setup on the Comm. Settings interface to set the Wiegand input and output parameters. 6.6.1 Wiegand Input P a g e | 41 Copyright2020 ZKTECO CO., LTD. All rights reserved. 4-inch Visible Light Terminal User Manual Function Description Function Name Descriptions Wiegand Format Values range from 26 bits, 34 bits, 36 bits, 37 bits, and 50 bits. Wiegand Bits Number of bits of Wiegand data. Pulse Width(us) The value of the pulse width sent by Wiegand is 100 microseconds by default, which can be adjusted within the range of 20 to 400 microseconds. Pulse Interval(us) ID Type The default value is 1000 microseconds, which can be adjusted within the range of 200 to 20000 microseconds. Select between User ID and card number. Various Common Wiegand Format Description:
Wiegand Format Description ECCCCCCCCCCCCCCCCCCCCCCCCO Wiegand26 Consists of 26 bits of binary code. The 1st bit is the even parity bit of the 2nd to 13th bits, while the 26th bit is the odd parity bit of the 14th to 25th bits. The 2nd to 25th bits are the card numbers. ESSSSSSSSCCCCCCCCCCCCCCCCO Wiegand26a Consists of 26 bits of binary code. The 1st bit is the even parity bit of the 2nd to 13th bits, while the 26th bit is the odd parity bit of the 14th to 25th bits. The 2nd to 9th bits are the site codes, while the 10th to 25th bits are the card numbers. ECCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCO Wiegand34 Consists of 34 bits of binary code. The 1st bit is the even parity bit of the 2nd to 17th bits, while the 34th bit is the odd parity bit of the 18th to 33rd bits. The 2nd to 25th bits are the card numbers. ESSSSSSSSCCCCCCCCCCCCCCCCCCCCCCCCO Wiegand34a Consists of 34 bits of binary code. The 1st bit is the even parity bit of the 2nd to 17th bits, while the 34th bit is the odd parity bit of the 18th to 33rd bits. The 2nd to 9th bits are the site codes, while the 10th to 25th bits are the card numbers. OFFFFFFFFFFFFFFFFCCCCCCCCCCCCCCCCMME Wiegand36 Consists of 36 bits of binary code. The 1st bit is the odd parity bit of the 2nd to 18th bits, while the 36th bit is the even parity bit of the 19th to 35th bits. The 2nd to 17th bits are the device codes. The 18th to 33rd bits are the card numbers, and the 34th to 35th bits are the manufacturer codes. P a g e | 42 Copyright2020 ZKTECO CO., LTD. All rights reserved. 4-inch Visible Light Terminal User Manual EFFFFFFFFFFFFFFFFFFCCCCCCCCCCCCCCCCO Wiegand36a Consists of 36 bits of binary code. The 1st bit is the even parity bit of the 2nd to 18th bits, while the 36th bit is the odd parity bit of the 19th to 35th bits. The 2nd to 19th bits are the device codes, and the 20th to 35th bits are the card numbers. OMMMMSSSSSSSSSSSSCCCCCCCCCCCCCCCCCCCE Wiegand37 Consists of 37 bits of binary code. The 1st bit is the odd parity bit of the 2nd to 18th bits, while the 37th bit is the even parity bit of the 19th to 36th bits. The 2nd to 4th bits are the manufacturer codes. The 5th to 16th bits are the site codes, and the 21st to 36th bits are the card numbers. EMMMFFFFFFFFFFSSSSSSCCCCCCCCCCCCCCCCO Wiegand37a Consists of 37 bits of binary code. The 1st bit is the even parity bit of the 2nd to 18th bits, while the 37th bit is the odd parity bit of the 19th to 36th bits. The 2nd to 4th bits are the manufacturer codes. The 5th to 14th bits are the device codes, and15th to 20th bits are the site codes, and the 21st to 36th bits are the card numbers. ESSSSSSSSSSSSSSSSCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCO Wiegand50 Consists of 50 bits of binary code. The 1st bit is the even parity bit of the 2nd to 25th bits, while the 50th bit is the odd parity bit of the 26th to 49th bits. The 2nd to 17th bits are the site codes, and the 18th to 49th bits are the card numbers. C denotes the card number; E denotes the even parity bit; O denotes the odd parity bit;
F denotes the facility code; M denotes the manufacturer code; P denotes the parity bit; and S denotes the site code. 6.6.2 Wiegand Output P a g e | 43 Copyright2020 ZKTECO CO., LTD. All rights reserved. 4-inch Visible Light Terminal User Manual Function Description Function Name Descriptions SRB When SRB is enabled, the lock is controlled by the SRB to prevent the lock from being opened due to device removal. Wiegand Format Values range from 26 bits, 34 bits, 36 bits, 37 bits, and 50 bits. Wiegand output bits After selecting the required Wiegand format, select the corresponding output bit digits of the Wiegand format. If the verification is failed, the system will send the failed ID to the device and replace the card number or personnel ID with the new one. It is similar to the device ID. The difference is that a site code can be set manually, and is repeatable in a different device. The valid value ranges from 0 to 256 by default. Pulse Width(us) The time width represents the changes of the quantity of electric charge with regular high-frequency capacitance within a specified time. Pulse Interval(us) The time interval between pulses. Select the ID types as either User ID or card number. Failed ID Site Code ID Type 6.7 Network Diagnosis To set the network diagnosis parameters. diagnostic parameters. Tap Network Diagnosis on the Comm. Settings interface to set the IP address diagnostic and Start the P a g e | 44 Copyright2020 ZKTECO CO., LTD. All rights reserved. 4-inch Visible Light Terminal User Manual 7 System Settings Set related system parameters to optimize the performance of the device. Tap System on the Main Menu interface to set the related system parameters so as to optimize the performance of the device. 7.1 Date and Time Tap Date Time on the System interface to set the date and time. Tap Manual time setting to manually set date and time and tap Confirm to save. Tap 24-Hour Time to enable or disable this format. If enabled, then select the Date Format to set Tap Daylight Saving Time to enable or disable the function. If enabled, tap Daylight Saving Mode to select a daylight-saving mode and then tap Daylight Saving Setup to set the switch the date format. time. P a g e | 45 Copyright2020 ZKTECO CO., LTD. All rights reserved. 4-inch Visible Light Terminal User Manual Week mode Date mode When restoring the factory settings, the time (24-hour) and date format (YYYY-MM-DD) can be restored, but the device date and time cannot be restored. NOTE: For example, the user sets the time of the device (18:35 on March 15, 2019) to 18:30 on January 1, 2020. After restoring the factory settings, the time of the equipment will remain 18:30 on January 1, 2020. 7.2 Access Logs Setting Click Access Logs Setting on the System interface. P a g e | 46 Copyright2020 ZKTECO CO., LTD. All rights reserved. 4-inch Visible Light Terminal User Manual Function Description Function Name Description Whether to capture and save the current snapshot image during verification. There are 5 modes:
No Photo: No photo is taken during user verification. Camera Mode Take photo and save: Photo is taken and saved during verification. Take photo, no save: Photo is taken but is not saved during verification. Save on successful verification: Photo is taken and saved for each successful verification. Save on failed verification: Photo will be taken and saved only for each failed verification. Display User Photo Whether to display the user photo when the user passes the verification. Access Logs Warning When the record space of the attendance access reaches the maximum threshold value, the device will automatically display the memory space warning. Users may disable the function or set a valid value between 1 and 9999. Circulation Delete Access Records Cyclic Delete ATT Photo When access records have reached full capacity, the device will automatically delete a set of old access records. Users may disable the function or set a valid value between 1 and 999. When attendance photos have reached full capacity, the device will automatically delete a set of old attendance photos. Users may disable the function or set a valid value between 1 and 99. Cyclic Delete Blocklist Photo When block listed photos have reached full capacity, the device will automatically delete a set of old block listed photos. Users may disable the function or set a valid value between 1 and 99. The time length of the message of successful verification displays. Confirm Screen Delay(s) Face comparison Interval (s) Valid value: 1~9 seconds. Valid value: 0~9 seconds. To set the facial template matching time interval as required. P a g e | 47 Copyright2020 ZKTECO CO., LTD. All rights reserved. 4-inch Visible Light Terminal User Manual 7.3 Face Parameters Tap Face on the System interface to go to the face parameter settings. Recommended Matching Thresholds FRR High FAR Low Medium Medium Low High 1:N 85 82 80 1:1 80 75 70 P a g e | 48 Copyright2020 ZKTECO CO., LTD. All rights reserved. 4-inch Visible Light Terminal User Manual Function Description Function Name 1:N Match Threshold 1:1 Match Threshold Face Enrollment Threshold Description Under 1:N verification mode, the verification will only be successful when the similarity between the acquired facial image and all registered facial templates is greater than the set value. The valid value ranges from 65 to 120. The higher the thresholds, the lower the misjudgment rate, the higher the rejection rate, and vice versa. is recommended to set the default value of 75. It Under 1:1 verification mode, the verification will only be successful when the similarity between the acquired facial image and the users facial templates enrolled in the device is greater than the set value. The valid value ranges from 55 to 120. The higher the thresholds, the lower the is misjudgment rate, the higher the rejection rate, and vice versa. recommended to set the default value of 63. It During face enrollment, 1:N comparison is used to determine whether the user has already registered before. When the similarity between the acquired facial image and all registered facial templates is greater than this threshold, it indicates that the face has already been registered. The pitch angle tolerance of a face for facial registration and comparison. Face Pitch Angle If a faces pitch angle exceeds this set value, it will be filtered by the algorithm, i.e. ignored by the terminal thus no registration and comparison interface will be triggered. Face Rotation Angle The rotation angle tolerance of a face for facial template registration and comparison. If a faces rotation angle exceeds this set value, it will be filtered by the algorithm, i.e. ignored by the terminal thus no registration and comparison interface will be triggered. Image Quality Image quality for facial registration and comparison. The higher the value, the clearer the image requires. Minimum Face Size Required for facial registration and comparison. If the minimum size of the captured figure is smaller than this set value, then it will be filtered off and not recognized as a face. This value can be understood as the face comparison distance. The farther the person is, the smaller the face is, and the smaller the face pixel will be obtained by the algorithm. Therefore, adjusting this parameter can adjust the furthest comparison distance of faces. When the value is 0, the face comparison distance is not limited. P a g e | 49 Copyright2020 ZKTECO CO., LTD. All rights reserved. 4-inch Visible Light Terminal User Manual LED Light Triggered Threshold This value controls the on and off of the LED light. The larger the value, the more frequently the LED light will be turned on. Motion Detection Sensitivity Live Detection Live Detection Threshold Anti-counterfeiting with NIR Face Algorithm Notes It is to set the value for the amount of change in a cameras field of view, which is known as potential motion detection that wakes up the terminal from standby to the comparison interface. The larger the value, the more sensitive the system would be, i.e. if a larger value is set, the comparison interface is much easier and the motion detection frequently triggered. Detecting the spoof attempt using visible light images to determine if the provided biometric source sample is really a person ( a live human being) or false representation. Facilitates to judge whether the captured visible image is really a person (a live human being). The larger the value, the better the anti-spoofing performance using visible light. Using near-infrared spectra imaging to identify and prevent fake photos and videos attack. Facial algorithm related information and pause facial template update. Improper adjustment of the exposure and quality parameters may severely affect the performance of the device. Please adjust the exposure parameter only under the guidance of the after-sales service personnel of our company. 7.4 Palm Parameters Tap Palm on the System interface to configure the palm settings. Function Description Function Name Description Palm 1:1 Matching Threshold Only when the similarity between the verifying palm and the users registered palm is greater than this value can the verification succeed. Palm 1:N Matching Threshold Under 1:N Verification Method, only when the similarity between the verifying palm and all registered palm is greater than this value can the verification succeed. P a g e | 50 Copyright2020 ZKTECO CO., LTD. All rights reserved. 4-inch Visible Light Terminal User Manual 7.5 Factory Reset The Factory Reset function restores the device settings such as communication settings and system settings, to the default factory settings (This function does not clear registered user data). Tap Reset on the System interface and then tap OK to restore the default factory settings. 7.6 USB Upgrade Tap USB Upgrade on the System interface. The device's firmware program can be upgraded with the upgrade file in a USB drive. Before conducting this operation, please ensure that the USB drive contains the correct upgrade file and is properly inserted If no USB disk is inserted in, the system gives the following prompt after you tap USB Upgrade on the into the device. System interface. P a g e | 51 Copyright2020 ZKTECO CO., LTD. All rights reserved. 4-inch Visible Light Terminal User Manual Note: If upgrade file is needed, please contact our technical support. Firmware upgrade is not recommenced under normal circumstances. 7.7 Device Type Setting Tap Device Type Setting on the System interface. Function Name Description Time Attendance Terminal Set the device as time attendance terminal. Access Control Terminal Set the device as access control terminal. P a g e | 52 Copyright2020 ZKTECO CO., LTD. All rights reserved. 4-inch Visible Light Terminal User Manual 8 Personalize Settings Tap Personalize on the Main Menu interface to customize interface settings, voice, bell, punch state options and shortcut key mappings. 8.1 Interface Settings Tap User Interface on the Personalize interface to customize the display style of the main interface. Function Description Function Name Wallpaper Language Menu Screen Timeout (s) Description The main screen wallpaper can be selected according to the user preference. Select the language of the device. When there is no operation, and the time exceeds the set value, the device will automatically go back to the initial interface. The function either can be disabled or set the required value between 60 and 99999 seconds. P a g e | 53 Copyright2020 ZKTECO CO., LTD. All rights reserved. 4-inch Visible Light Terminal User Manual Idle Time To Slide Show (s) When there is no operation, and the time exceeds the set value, a slide show will be played. The function can be disabled, or you may set the value between 3 and 999 seconds. Slide Show Interval
(s) It is the time interval in switching between different slide show photos. The function can be disabled, or you may set the interval between 3 and 999 seconds. Idle Time to Sleep
(m) If the sleep mode is activated, and when there is no operation in the device, then the device will enter standby mode. Tap the screen anywhere to resume normal working mode. This function can be disabled or set a value within 1-999 minutes. Main Screen Style The main screen style can be selected according to the user preference. 8.2 Voice Settings Tap Voice on the Personalize interface to configure the voice settings. Function Description Function Name Voice Prompt Touch Prompt Volume Description Toggle to enable or disable the voice prompts during function operations. Toggle to enable or disable the keypad sounds. Adjust the volume of the device which can be set between : 0-100. 8.3 Bell Schedules Tap Bell Schedules on the Personalize interface to configure the Bell settings. P a g e | 54 Copyright2020 ZKTECO CO., LTD. All rights reserved. 4-inch Visible Light Terminal User Manual New Bell Schedule Tap New Bell Schedule on the Bell Schedule interface to add a new bell schedule. Description Function Description Function Name Bell Status Bell Time Repeat Ring Tone All Bell Schedules scheduled bell. Edit the scheduled bell Delete a bell delete the selected bell. Toggle to enable or disable the bell status. Once the required time is set, the device will automatically trigger to ring the bell during that time. Set the required number of counts to repeat the scheduled bell. Select a ring tone. Internal bell delay(s) Set the replay time of the internal bell. Valid values range from 1 to 999 seconds. Once the bell is scheduled, on the Bell Schedules interface, tap All Bell Schedules to view the newly On the All Bell Schedules interface, tap on the required bell schedule, and tap Edit to edit the selected bell schedule. The editing method is the same as the operations of adding a new bell schedule. On the All Bell Schedules interface, tap the required bell schedule, and tap Delete, and then tap Yes to P a g e | 55 Copyright2020 ZKTECO CO., LTD. All rights reserved. 4-inch Visible Light Terminal User Manual 8.4 Punch States Options Tap Punch States Options on the Personalize interface to configure the punch state settings. Function Description Function Name Description Off: Disable the punch state function. Therefore, the punch state key set under Shortcut Key Mappings menu will become invalid. Manual Mode: Switch the punch state key manually, and the punch state key will disappear after Punch State Timeout. Auto Mode: The punch state key will automatically switch to a specific punch status according to the predefined time schedule which can be set in the Shortcut Key Mappings. Manual and Auto Mode: The main interface will display the auto-switch punch state key. However, the users will still be able to select alternative that is the manual attendance status. After timeout, the manual switching punch state key will become auto-switch punch state key. Manual Fixed Mode: After the punch state key is set manually to a particular punch status, the function will remain unchanged until being manually switched again. Fixed Mode: Only the manually fixed punch state key will be shown. Users cannot change the status by pressing any other keys. Punch State Mode P a g e | 56 Copyright2020 ZKTECO CO., LTD. All rights reserved. 4-inch Visible Light Terminal User Manual 8.5 Shortcut Key Mappings Users may define shortcut keys for attendance status and for functional keys which will be defined on the main interface. So, on the main interface, when the shortcut keys are pressed, the corresponding attendance status or the function interface will be displayed directly. Tap Shortcut Key Mappings on the Personalize interface to set the required shortcut keys. On the Shortcut Key Mappings interface, tap on the required shortcut key to configure the shortcut key settings. On the Shortcut Key (that is F1) interface, tap function to set the functional process of the shortcut key either as punch state key or function key. If the Shortcut key is defined as a function key (such as New user, All users, etc.), the configuration is completed as shown in the image below. If the Shortcut key is set as a punch state key (such as check in, check out, etc.), then it is required to set the punch state value (valid value 0~250), name. Set the switch time The switch time is set in accordance with the punch state options. When the punch state mode is set to auto mode, the switch time should be set. On the Shortcut Key interface, tap Set Switch Time to set the switch time. P a g e | 57 Copyright2020 ZKTECO CO., LTD. All rights reserved. 4-inch Visible Light Terminal User Manual On the Switch Cycle interface, select the switch cycle (Monday, Tuesday etc.) as shown in the image below. Once the Switch cycle is selected, set the switch time for each day and tap OK to confirm, as shown in the image below. Note: When the function is set to Undefined, the device will not enable the punch state key. P a g e | 58 Copyright2020 ZKTECO CO., LTD. All rights reserved. 4-inch Visible Light Terminal User Manual 9 Data Management On the Main Menu, tap Data Mgt. to delete the relevant data in the device. 9.1 Delete Data Tap Delete Data on the Data Mgt. interface to delete the required data. P a g e | 59 Copyright2020 ZKTECO CO., LTD. All rights reserved. 4-inch Visible Light Terminal User Manual Function Description Function Name Description Delete Access Records To delete attendance data/access records conditionally. Delete Attendance Photo To delete attendance photos of designated personnel. Delete Blocklist Photo To delete the photos taken during failed verifications. Delete All Data To delete information and attendance logs/access records of all registered users. Delete Admin Role To remove all administrator privileges. Delete Access Control To delete all access data. Delete User Photo To delete all user photos in the device. Delete Wallpaper To delete all wallpapers in the device. Delete Screen Savers To delete the screen savers in the device. The user may select Delete All or Delete by Time Range when deleting the access records, attendance photos or block listed photos. Selecting Delete by Time Range, you need to set a specific time range to delete all data within a specific period. Select Delete by Time Range. Set the time range and click OK. P a g e | 60 Copyright2020 ZKTECO CO., LTD. All rights reserved. 4-inch Visible Light Terminal User Manual 10 Access Control On the Main Menu, tap Access Control to set the schedule of door opening, locks control and to configure other parameters settings related to access control. To gain access, the registered user must meet the following conditions:
The relevant doors current unlock time should be within any valid time zone of the user time period. The corresponding users group must be already set in the door unlock combination (and if there are other groups, being set in the same access combo, then the verification of those groups members are also required to unlock the door). In default settings, new users are allocated into the first group with the default group time zone, where the access combo is 1 and is set in unlock state by default. P a g e | 61 Copyright2020 ZKTECO CO., LTD. All rights reserved. 4-inch Visible Light Terminal User Manual 10.1 Access Control Options the terminal and related equipment. Tap Access Control Options on the Access Control interface to set the parameters of the control lock of Function Description Function Name Gate Control Mode Description Toggle between ON or OFF switch to get into gate control mode or not. When set to ON, on this interface will remove Door lock relay, Door sensor relay and Door sensor type options. Door Lock Delay (s) The length of time that the device controls the electric lock to be in unlock state. Valid value: 1~10 seconds; 0 second represents disabling the function. Door Sensor Delay (s) If the door is not locked and is being left open for a certain duration (Door Sensor Delay), an alarm will be triggered. The valid value of Door Sensor Delay ranges from 1 to 255 seconds. There are three Sensor types: None, Normal Open and Normal Closed. Door Sensor Type None: It means door sensor is not in use. Normal Open: It means the door is always left opened when electric power is on. Normal Closed: It means the door is always left closed when electric power is on. P a g e | 62 Copyright2020 ZKTECO CO., LTD. All rights reserved. 4-inch Visible Light Terminal User Manual Verification Mode The supported verification mode includes Password/Face, User ID only, Password, Face only, and Face + Password. Door available time period Normal open time Period Master Device To set time period for door, so that the door is available only during that period. Scheduled time period for Normal Open mode, so that the door is always left open during this period. When setting up the master, the status of the master can be set to exit on enter. Out: The record verified on the host is the exit record. In: The record verified on the host is the entry record. When setting up the slave, the status of the slave can be set to exit on enter. Slave Device Out: The record verified on the host is the exit record. In: The record verified on the host is the entry record. Auxiliary input configuration Verify mode by RS485 Speaker Alarm Sets the door unlock time period and auxiliary output type of the auxiliary terminal device. Auxiliary output types include None, Trigger door open, Trigger Alarm, Trigger door open and Alarm. The verification mode is used when the device is used either as a host or slave. The supported verification mode includes Card Only, Card + Password. Transmits a sound alarm or disassembly alarm from the local. When the door is closed or the verification is successful, the system will cancel the alarm from the local. Reset Access Setting The access control reset parameters include door lock delay, door sensor delay, door sensor type, verification mode, door available time period, normal open time period, master device, and alarm. However, erased access control data in Data Mgt. is excluded. 10.2 Time Rule Setting Tap Time Rule Setting on the Access Control interface to configure the time settings. The entire system can define up to 50 Time Periods. Each Time Period represents 10 Time Zones, i.e. 1 week and 3 holidays, and each time zone is a standard 24 hour period per day and the user can only verify within the valid time period. One can set a maximum of 3 time periods for every time zone. The relationship among these time periods is "OR". Thus when the verification time falls in any one of these time periods, the verification is valid. P a g e | 63 Copyright2020 ZKTECO CO., LTD. All rights reserved. 4-inch Visible Light Terminal User Manual The Time Zone format of each Time Period: HH MM-HH MM, which is accurate to minutes according to the 24-hour clock. Tap the grey box to search the required Time Zone and specify the required Time Zone number (maximum:
up to 50 zones). On the selected Time Zone number interface, tap on the required day (that is Monday, Tuesday etc.) to set the time. P a g e | 64 Copyright2020 ZKTECO CO., LTD. All rights reserved. 4-inch Visible Light Terminal User Manual Specify the start and the end time, and then tap OK. NOTE:
1 When the End Time is earlier than the Start Time, (such as 23:57~23:56), it indicates that access is 2 When the End Time is later than the Start Time, (such as 00:00~23:59), it indicates that the interval prohibited all day. is valid. 3 The effective Time Period to keep the Door Unlock or open all the day is (00:00~23:59) or also when the Ending Time is later than the Starting Time, (such as 08:00~23:59). 4 The default Time Zone 1 indicates that door is open all day long. 10.3 Holidays Whenever there is a holiday, you may need a special access time; but changing everyone's access time one by one is extremely cumbersome, so you can set a holiday access time which is applicable to all employees, and the user will be able to open the door during the holidays. Tap Holidays on the Access Control interface to set the Holiday access. P a g e | 65 Copyright2020 ZKTECO CO., LTD. All rights reserved. 4-inch Visible Light Terminal User Manual Add a New Holiday Tap Add Holiday on the Holidays interface and set the holiday parameters. On the Holidays interface, select a holiday item to be modified. Tap Edit to modify holiday Edit a Holiday parameters. Delete a Holiday On the Holidays interface, select a holiday item to be deleted and tap Delete. Press OK to confirm deletion. After deletion, this holiday is no longer displayed on All Holidays interface. 10.4 Combined Verification Access groups are arranged into different door-unlocking combinations to achieve multiple verifications and strengthen the security. In a door-unlocking combination, the range of the combined number N is: 0 N 5, and the number of members N may all belong to one access group or may belong to five different Tap Combined Verification on the Access Control interface to configure the combined verification access groups. setting. P a g e | 66 Copyright2020 ZKTECO CO., LTD. All rights reserved. 4-inch Visible Light Terminal User Manual On the combined verification interface, tap the Door-unlock combination to be set, and tap the up and down arrows to input the combination number, and then press OK. For Example:
The Door-unlock combination 1 is set as (01 03 05 06 08), indicating that the unlock combination 1 consists of 5 people, and the 5 individuals are from 5 groups, namely, Access Control Group 1 (AC group 1), AC group 3, AC group 5, AC group 6, and AC group 8, respectively. The Door-unlock combination 2 is set as (02 02 04 04 07), indicating that the unlock combination 2 consists of 5 people; the first two are from AC group 2, the next two are from AC group 4, and the last person is from AC group 7. The Door-unlock combination 3 is set as (09 09 09 09 09), indicating that there are 5 people in this combination; all of which are from AC group 9. The Door-unlock combination 4 is set as (03 05 08 00 00), indicating that the unlock combination 4 consists of only three people. The first person is from AC group 3, the second person is from AC group 5, and the third person is from AC group 8. Delete a door-unlocking combination Set all Door-unlock combinations to 0 if you want to delete door-unlock combinations. P a g e | 67 Copyright2020 ZKTECO CO., LTD. All rights reserved. 4-inch Visible Light Terminal User Manual 10.5 Anti-passback Setup It is possible that users may be followed by some persons to enter the door without verification, resulting in a security breach. So, to avoid such a situation, the Anti-Passback option was developed. Once it is enabled, the check-in record must match with the check-out record so as to open the door. This function requires two devices to work together: one is installed inside the door (master device), and the other one is installed outside the door (slave device). The two devices communicate via the Wiegand signal. The Wiegand format and Output type (User ID / Card Number) adopted by the master device and slave device must be consistent. Tap Anti-passback Setup on the Access Control interface. Function Description Function Name Description Anti-passback direction is disabled, which means No Anti-passback: Anti-passback successful verification through either the master device or slave device can unlock the door. The attendance state is not saved in this option. function Out Anti-passback: After a user checks out, only if the last record is a check-in record, the user can check-out again; otherwise, the alarm will be triggered. However, the user can check-in freely. In Anti-passback: After a user checks in, only if the last record is a check-out record, the user can check-in again; otherwise, the alarm will be triggered. However, the user can check-out freely. In/Out Anti-passback: After a user checks in/out, only if the last record is a check-out record, the user can check-in again; or if it is a check-in record, the user can check-out again; otherwise, the alarm will be triggered. P a g e | 68 Copyright2020 ZKTECO CO., LTD. All rights reserved. 4-inch Visible Light Terminal User Manual 10.6 Duress Options Once a user activates the duress verification function with specific authentication method(s), and when he/she is under coercion and authenticates using duress verification, the device will unlock the door as usual, but at the same time, a signal will be sent to trigger the alarm. On Access Control interface, tap Duress Options to configure the duress settings. Description Function Description Function Name Alarm on Password When a user uses the password verification method, an alarm signal will be generated only when the password verification is successful, otherwise there will be no alarm signal. Alarm Delay (s) Alarm signal will not be transmitted until the alarm delay time is elapsed. The value ranges from 1 to 999 seconds. Duress Password Set the 6-digit duress password. When the user enters this duress password for verification, an alarm signal is be generated. P a g e | 69 Copyright2020 ZKTECO CO., LTD. All rights reserved. 4-inch Visible Light Terminal User Manual 11 USB Manager You can import the user information, and attendance data in the machine to matching attendance software for processing by using a USB disk, or import the user information to other devices for backup. Before uploading/downloading data from/to the USB disk, insert the USB disk into the USB slot first. Tap USB Manager on the main menu interface. 11.1 USB Download On the USB Manager interface, tap Download. Description To download access record in specified time period into USB disk. User Data To download all user information from the device into USB disk. User Portrait To download all user portraits from the device into a USB disk. To download all attendance photos from the device into USB disk. Function Name Download Access Record Attendance Photo Blocklist Photo To download all blocklisted photos (photos taken after failed verifications) from the device into USB disk. P a g e | 70 Copyright2020 ZKTECO CO., LTD. All rights reserved. 4-inch Visible Light Terminal User Manual 11.2 USB Upload On the USB Manager interface, tap Download. Function Name Description Screen Saver Wallpaper To upload all screen savers from USB disk into the device. You can choose Upload selected photo or Upload all photos. The images will be displayed on the devices main interface after upload. To upload all wallpapers from USB disk into the device. You can choose Upload selected photo or Upload all photos. The images will be displayed on the screen after upload. User Data To upload all the user information from USB disk into the device. User Portrait To upload all user portraits from USB disk into the device. P a g e | 71 Copyright2020 ZKTECO CO., LTD. All rights reserved. 4-inch Visible Light Terminal User Manual 12 Attendance Search Once the identity of a user is verified, the Event Logs will be saved in the device. This function enables users to check their access records. Click Attendance Search on the Main Menu interface to search for the required Access/Attendance log. The process of searching for attendance and blocklist photos is similar to that of searching for event logs. The following is an example of searching for event logs. On the Attendance Search interface, tap Event Logs to search for the required record. P a g e | 72 Copyright2020 ZKTECO CO., LTD. All rights reserved. 4-inch Visible Light Terminal User Manual 1. Enter the user ID to be searched and click OK. If you want to search for logs of all users, click OK without entering any user ID. 2. Select the time range in which the logs need to be searched. 3. Once the log search succeeds. Tap the login highlighted in green to view its details. 4. The below figure shows the details of the selected log. P a g e | 73 Copyright2020 ZKTECO CO., LTD. All rights reserved. 4-inch Visible Light Terminal User Manual 13 Autotest On the Main Menu, tap Autotest to automatically test whether all modules in the device function properly, which include the LCD, Voice, Camera and Real-Time Clock (RTC). Function Description Function Name Description Test All Test LCD Test Voice To automatically test whether the LCD, Audio, Camera and RTC are normal. To automatically test the display effect of LCD screen by displaying full-
color, pure white, and pure black to check whether the screen displays colors normally. To automatically test whether the audio files stored in the device are complete and the voice quality is good. Microphone test Check whether the microphone is working by speaking to microphone and playing the microphone recording. Test Face To test if the camera functions properly by checking the photos taken to see if they are clear enough. Test Clock RTC To test the RTC. The device tests whether the clock works normally and accurately with a stopwatch. Tap the screen to start counting and press it again to stop counting. P a g e | 74 Copyright2020 ZKTECO CO., LTD. All rights reserved. 4-inch Visible Light Terminal User Manual 14 System Information On the Main Menu, tap System Info to view the storage status, the version information of the device, and firmware information. Function Description Function Name Description Device Capacity Displays the current device's user storage, palm, password, face and card storage, administrators, access records, attendance and blocklist photos, and user photos. Device Info Displays the device's name, serial number, MAC address, palm and face algorithm, version information, platform information, and manufacturer and manufacture date. Firmware Info Displays the firmware version and other version information of the device. P a g e | 75 Copyright2020 ZKTECO CO., LTD. All rights reserved. 4-inch Visible Light Terminal User Manual 15 Connect to ZKBioAccess Software 15.1 Set the Communication Address Device side 1. Tap COMM. > Ethernet in the main menu to set the IP address and gateway of the device.
(Note: The IP address should be able to communicate with the ZKBioAccess server, preferably in the same network segment with the server address) 2. In the main menu, click COMM. > Cloud Server Setting to set the server address and server port. Server address: Set the IP address as of ZKBioAccess server. Server port: Set the server port as of ZKBioAccess(The default is 8088). P a g e | 76 Copyright2020 ZKTECO CO., LTD. All rights reserved. 4-inch Visible Light Terminal User Manual Software side Login to ZKBioAccess software, click System > Communication > Communication Monitor to set the ADMS service port, as shown in the figure below:
15.2 Add Device on the Software Add the device by searching. The process is as follows:
1 Click Access Control > Device > Search Device, to open the Search interface in the software. 2 Click Search, and it will prompt [Searching]. 3 After searching, the list and total number of access controllers will be displayed. 4 Click [Add] in operation column, a new window will pop-up. Select Icon type, Area, and Add to Level from each dropdown and click [OK] to add the device. P a g e | 77 Copyright2020 ZKTECO CO., LTD. All rights reserved. 4-inch Visible Light Terminal User Manual 15.3 Add Personnel on the Software 1. Click Personnel > Person > New:
2. Fill in all the required fields and click [OK] to register a new user. 3. Click Access > Device > Device Control > Synchronize All Data to Devices to synchronize all the data to the device including the new users. P a g e | 78 Copyright2020 ZKTECO CO., LTD. All rights reserved. 4-inch Visible Light Terminal User Manual Appendix 1 Light Face Images Requirements of Live Collection and Registration of Visible 1 It is recommended to perform registration in an indoor environment with an appropriate light source without underexposure or overexposure. 2 Do not place the device towards outdoor light sources like door or window or other harsh light 3 Dark-color apparels, different from the background color is recommended for registration. 4 Please expose your face and forehead properly and do not cover your face and eyebrows with your sources. hair. 5 It is recommended to show a plain facial expression. (A smile is acceptable, but do not close your eyes, or incline your head to any orientation). 6 Two images are required for a person with eyeglasses, one image with eyeglasses and the other without the eyeglasses. 7 Do not wear accessories like a scarf or mask that may cover your mouth or chin. 8 Please face right towards the capturing device, and locate your face in the image capturing area as shown in the image below. 9 Do not include more than one face in the capturing area. 10 A distance of 50cm to 80cm is recommended for capturing the image. (the distance is adjustable, subject to body height). P a g e | 79 Copyright2020 ZKTECO CO., LTD. All rights reserved. 4-inch Visible Light Terminal User Manual Requirements for Visible Light Digital Face Image Data The digital photo should be straight-edged, colored, half-portrayed with only one person, and the person should be uncharted and in casuals. Persons who wear eyeglasses should remain to put on eyeglasses for 200 pixels or above are recommended with no less than 115 pixels of distance. Neutral face or smile with eyes naturally open are recommended. Horizontal rotating angle should not exceed 10, elevation should not exceed 10, and depression angle Masks or colored eyeglasses are not allowed. The frame of the eyeglasses should not cover eyes and should not reflect light. For persons with thick eyeglasses frame, it is recommended to capture two images, one with eyeglasses and the other one without the eyeglasses. Complete face with clear contour, real scale, evenly distributed light, and no shadow. getting photo captured. Eye Distance Facial Expression Gesture and Angel should not exceed 10. Accessories Face Image Format Should be in BMP, JPG or JPEG. Data Requirement Should comply with the following requirements:
1 White background with dark-colored apparel. 2 24bit true color mode. 3 JPG format compressed image with not more than 20kb size. 4 Resolution should be between 358 x 441 to 1080 x 1920. 5 The vertical scale of head and body should be in a ratio of 2:1. 6 The photo should include the captured persons shoulders at the same horizontal level. 7 The captured persons eyes should be open and with clearly seen iris. 8 Neutral face or smile is preferred, showing teeth is not preferred. 9 The captured person should be clearly visible, natural in color, no harsh shadow or light spot or reflection in face or background. The contrast and lightness level should be appropriate. P a g e | 80 Copyright2020 ZKTECO CO., LTD. All rights reserved. 4-inch Visible Light Terminal User Manual Appendix 2 Statement on the Right to Privacy Dear Customers:
Thank you for choosing this hybrid biometric recognition product, which was designed and manufactured by ZKTeco. As a world-renowned provider of core biometric recognition technologies, we are constantly developing and researching new products, and strive to follow the privacy laws of each country in which our products are sold. We Declare That:
1. All of our user fingerprint recognition devices capture only characteristics, not fingerprint images, and do not involve privacy protection. 2. None of the fingerprint characteristics that we capture can be used to reconstruct an image of the original fingerprint, and do not involve privacy protection. 3. As the provider of this device, we will assume no direct or indirect responsibility for any consequences that may result from your use of this device. 4. If you would like to dispute human rights or privacy issues concerning your use of our product, please directly contact your dealer. Our other law-enforcement fingerprint devices or development tools can capture the original images of users fingerprints. As to whether or not this constitutes an infringement of your rights, please contact your Government or the final supplier of the device. As the manufacturer of the device, we will assume no legal liability. Note:
law. The law includes the following provisions on the personal freedom of its citizens:
1. There shall be no illegal arrest, detention, search, or infringement of persons;
2. Personal dignity is related to personal freedom and shall not be infringed upon;
3. A citizen's house may not be infringed upon;
4. A citizen's right to communication and the confidentiality of that communication is protected by the As a final point, we would like to further emphasize that biometric recognition is an advanced technology that will be certainly used in E-commerce, banking, insurance, judicial, and other sectors in the future. Every year the world is subjected to major losses due to the insecure nature of passwords. The Biometric products serve to protect your identity in high-security environments. P a g e | 81 Copyright2020 ZKTECO CO., LTD. All rights reserved. 4-inch Visible Light Terminal User Manual Eco-friendly Operation The product's "eco-friendly operational period" refers to the time during which this product will not discharge any toxic or hazardous substances when used in accordance with the prerequisites in this manual. The eco-friendly operational period specified for this product does not include batteries or other components that are easily worn down and must be periodically replaced. The battery's eco-friendly operational period is 5 years. Hazardous or Toxic substances and their quantities Hazardous/Toxic Substance/Element Lead (Pb) Mercury
(Hg) Cadmiu m (Cd) Hexavalent chromium Polybrominate d Biphenyls Polybrominated Diphenyl Ethers
(Cr6+)
(PBB)
(PBDE) Component Name Chip Resistor Chip Capacitor Chip Inductor Diode ESD component Buzzer Adapter Screws indicates that the total amount of toxic content in all the homogeneous materials is below the limit as specified in SJ/T 113632006. indicates that the total amount of toxic content in all the homogeneous materials exceeds the limit as specified in SJ/T 113632006. Note: 80% of this products components are manufactured using non-toxic and eco-friendly materials. The components which contain toxins or harmful elements are included due to the current economic or technical limitations which prevent their replacement with non-toxic materials or elements. P a g e | 82 Copyright2020 ZKTECO CO., LTD. All rights reserved. This equipment complies with RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body ZKTeco Industrial Park, No. 26, 188 Industrial Road, Tangxia Town, Dongguan, China. Phone : +86 769 - 82109991 Fax
: +86 755 - 89602394 www.zkteco.com Copyright 2020 ZKTECO CO., LTD. All Rights Reserved.
1 2 | label info & location | ID Label/Location Info | 286.13 KiB | October 27 2020 |
Reema OS A eT eR ORR aE ar 0 RT er ae ee Oe ee TD aaa pa, Nv i ft OTHGLU LUT AT LLU U YP LSE Wu PT ARCS CSC YA A AC 1 LY 0 Ut Ta aaa a) ered We en rn en ee Pe MPP nT Toy ui errr. A 4 ZK Teca Smart Access Control Terminal Model: MiniAC 3 ps4 Input: DC 12V=3A Operating Temperature: 0C-45C CUE eects eee ar BO sonic fered ECC ID: 2AT9T-MINTACI ee PETC Mm @l ar 8 Riese a
1 2 | Confidentiality Request | Cover Letter(s) | 117.59 KiB | October 27 2020 |
ZKTECO CO., LTD. Federal Communications Commission Authorization and Evaluation Division Confidentiality Request regarding application for certification of FCC ID: 2AJ9T-MINIACI Pursuant to Sections 0.457 and 0.459 of the Commissions Rules, we hereby request confidential treatment of information accompanying this application as outlined below:
Exhibit Type Block Diagram, Schematics, Operational Description, File Name Block Diagram Operation Description schematic diagram The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. Zhonglie Ge ZKTECO CO., LTD. Rev 11/20/07
1 2 | FCC SDOC | Attestation Statements | 146.10 KiB | October 27 2020 |
ZKTECO CO., LTD. Date: 2020-10-14 To: Federal Communications Commission 7435 Oakland Mills Road Columbia, MD To Whom It May Concern:
This letter is to ascertain that ZKTECO CO., LTD. EUTSmart Access Control Terminal MODEL No.: SpeedFace-V4L,MiniAC FCC ID: 2AJ9T-MINIACI Will apply for FCC SDOC If you have any question or concerns, pls. contact us. Sincerely, Clients signature Clients name / title Zhonglie Ge Contact information / address: ZKTECO CO., LTD. / No.26,Pingshan 188 Industry zone,Tangxia Town,Dongguan City,Guangdong Province,China 523728
1 2 | MCL | Cover Letter(s) | 83.81 KiB | October 27 2020 |
Declaration on model difference We the undersigned hereby confirm that any of our production units bearing the following model numbers are identical in circuitry and electrical, mechanical and physical construction; the only differences are the model name and the color of appearance for trading purpose. FCC ID: 2AJ9T-MINIACI Production name Trade name Model no. Smart Access Control N/A SpeedFace-V4L,MiniAC Terminal Confirmed by ZKTECO CO.,LTD. Zhonglie Ge ZKTECO CO., LTD. Date: 2020-09-17
1 2 | Power of Attorney Letter | Cover Letter(s) | 101.68 KiB | October 27 2020 |
ZKTECO CO., LTD. Federal Communications Commission Authorization and Evaluation Division 1435 Oakland Mills Road Columbia, MD 21046 Date: 2020-09-13 SUBJECT: FCC Application for FCC ID: 2AJ9T-MINIACI To Whom It May Concern:
We, the undersigned, hereby authorize Lisa Wang at EMTEK (SHENZHEN) CO., LTD. on our behalf, to apply to the Federal Communications Commission on our equipment. Any and all acts carried out by EMTEK (SHENZHEN) CO., LTD. on our behalf shall have the same effect as acts of our own. This is to advise that we are in full compliance with the Anti- Drug Abuse Act. We, the applicant, are not subject to a denial of federal benefits pursuant to Section 5301 of the Anti-Drug Act of 1988, 21 USC853a, and no party to the application is subject to a denial of federal benefits pursuant to that section. ZhonglieGey/ Engineer ZKTECO CO., LTD.
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2020-10-27 | 0.125 ~ 0.125 | DCD - Part 15 Low Power Transmitter Below 1705 kHz | Original Equipment |
2 | 2412 ~ 2462 | DTS - Digital Transmission System |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 2 | Effective |
2020-10-27
|
||||
1 2 | Applicant's complete, legal business name |
ZKTECO CO., LTD.
|
||||
1 2 | FCC Registration Number (FRN) |
0026008086
|
||||
1 2 | Physical Address |
No.26, Pingshan 188 Industry zone, Tangxia Town, Dongguan City, Guangdong Province, China 523728
|
||||
1 2 |
No.26, Pingshan 188 Industry zone, Tangxia Town
|
|||||
1 2 |
Dongguan, N/A
|
|||||
1 2 |
China
|
|||||
app s | TCB Information | |||||
1 2 | TCB Application Email Address |
T******@timcoengr.com
|
||||
1 2 | TCB Scope |
A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
|
||||
1 2 |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
|||||
app s | FCC ID | |||||
1 2 | Grantee Code |
2AJ9T
|
||||
1 2 | Equipment Product Code |
MINIACI
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 2 | Name |
Z******** G********
|
||||
1 2 | Title |
Engineer
|
||||
1 2 | Telephone Number |
+86 0******** Extension:
|
||||
1 2 | Fax Number |
+86 0********
|
||||
1 2 |
G******@ZKTECO.COM
|
|||||
app s | Technical Contact | |||||
n/a | ||||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 2 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 2 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 2 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 2 | Equipment Class | DCD - Part 15 Low Power Transmitter Below 1705 kHz | ||||
1 2 | DTS - Digital Transmission System | |||||
1 2 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Smart Access Control Terminal | ||||
1 2 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 2 | Modular Equipment Type | Does not apply | ||||
1 2 | Purpose / Application is for | Original Equipment | ||||
1 2 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | Yes | ||||
1 2 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 2 | Grant Comments | Power listed is conducted. Device must be operated to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20 and 40 MHz bandwidth modes. | ||||
1 2 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 2 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 2 | Firm Name |
EMTEK (Shenzhen) Co., Ltd.
|
||||
1 2 | Name |
L******** W********
|
||||
1 2 | Telephone Number |
86 75********
|
||||
1 2 |
w******@emtek.com.cn
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15C | 0.12500000 | 0.12500000 | |||||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
2 | 1 | 15C | 2412.00000000 | 2462.00000000 | 0.0250000 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC