FCC ID: 2AUYV-ZMBIZI-Z2 Zmbizi Z2 4G Smart Phone

User Manual 1 Table of Contents Safety Information ............................................................. 4 Introduction ......................................................................... 6 Call Functions ..................................................................... 7 Contacts ............................................................................... 9 Message ............................................................................. 12 Camera ................................................................................ 19 Gallery ................................................................................. 22 2 Music ................................................................................... 24 Sound Recorder ............................................................... 24 Alarm Clock ....................................................................... 25 Google Play ....................................................................... 27 Settings............................................................................... 29 Storage ............................................................................... 39 FCC Rules Compliance ................................................... 37 IC Notice ............................................................................. 41 3 Safety Information Please carefully read the iterms bellow:

Use Safely Do not use the phone in situations where it might cause danger. Transportation Safety Please observe all transportation laws and regulations. Please drive with both hands on the wheel. DO NOT TEXT AND DRIVE Hospitals Please follow limitations. Airports Please turn off your mobile phone when near medical instruments. 4 Remember to follow all airport and flight safety regulations. Please do not use your phone during flight. Toxic Chemicals Hazard Do not use your mobile phone around fuels or chemicals. Do not use in hazardous areas where explosions may occur. Accessories and Batteries Use only Blu authorized batteries and accessories. Backup Water Remember to keep a written record of all important information. Your phone is not waterproof. Keep it away from water and liquids. SOS Emergency Calls Make sure your mobile phone is switched on and in a service area. In home screen, tap the 5 phone key and dial 911 and send. 6 Introduction Power On and Off On - Please ensure the SIM card has been properly inserted into the phone. Long press the Power key to switch on the phone. Off - In standby mode, long press on Power key until an options menu appears. Select Power Off in the menu and confirm Security You may set a security lock feature as a security measure for the phone. For further information regarding password locks, password revision and other functions please enter into the security option in system settings. Call Functions 7 At the dial keyboard, enter the phone number and then click the dial key. If dialing an extension, you may click the dial pad icon in the bottom of the screen to open the interface and enter the number of the extension. You may also press and hold the 0 key to add a (+) sign when adding an international dialing prefix. history 8 Every telephone number called and received will be saved in the history. All numbers in the history can be dialed directly by clicking the CALL BACK on the screen. When the number appears on the list, click it to view details. Call Options There are different options that can be used in the history and dialing interface. You may press the MORE while in the dial interface and adjust speed dial and call settings. In the dialing interface, you may press the search button to browse through contacts list or set default contact resources. Contacts 9 Add Contact Enter: Click on the applications menu and select contacts. The default display is the phone contacts and SIM card contacts. The contacts are organized alphabetically by default. Click the Search icon to enter the contact search interface. Any numbers or letters associated with any of the contacts 10 saved in the list will be shown in the search results. Add New Contact 1. Click the add contact icon (+) to add contact. 2. Select to save your contacts to the GoogleTM account, the phone or the SIM card. 3. You may enter different contact details which include adding a picture, name, telephone number, group, address, and email among other options. 4. Click to finish and save contact. 11 12 Messages You may use this function to exchange text messages and multimedia messages with your family and friends. The messages to and from the same contact or phone number will be saved into a single conversation so you may see the entire message history conveniently. 13 14 Send an SMS Application Menu Messaging New message (or shortcut icon) 1. Click to enter recipient (You may enter contacts from contact book or enter a new number) 2. Compose Message 3. Send Send an MMS When creating message, the default message style is SMS. The message will automatically convert to MMS when adding an attachment. 1. Click the attachment icon in the messaging interface. 2. Click to add attachments and create an MMS message. Internet Browser Menu Functions Recent tab previous page. Windows After browsing through multiple pages, this option will return the user to the 15 You may view all windows open by clicking the windows icon in the upper right part of the browser. Bookmarks Bookmark. Click the save to Bookmarks option to make the current URL as a saved Click Bookmarks/History to opened saved bookmarks. Find on page: Search current page. Share page: Select to share the current page. Bookmarks/History: Show your browsing history and view the most visited pages. Settings: Contains a variety of browser settings. 16 17 Bluetooth & Wi-Fi Bluetooth is a short-range wireless communications technology that devices can use to exchange information and connect to different types of devices which include headsets and other devices. Power on Bluetooth 18 19 1) Settings Bluetooth and select to power on Bluetooth. 2) The Bluetooth icon will appear in the notification bar. Click scan for devices and the phone will start to scan for all devices within range. 3) In Bluetooth settings all the devices found will displayed in the list under the icon. Note: The maximum detecting time of the phone is 2 minutes. Power on Wi-Fi 1) Settings Wi-Fi and select ON to power on Wi-Fi 2) Click on the desired Wi-Fi network to be connected. Unsecured networks can be connected to directly - secured networks require a password or credentials prior to 20 connection. 21 Camera Camera Prior to use: Insert SD card before using the camera or video camera. All photos or videos taken by the phone are typically stored in the memory card for large storage capacity of images. Open Camera 22 1. Applications Menu Camera 2. Switch to video mode if you want to record videos. Note: You may place a camera shortcut icon on any of the screens Take Pictures 1. Aim the object that the picture will be taken. 2. Press the Shutter button on the screen. 3. After taking the picture, the file will be saved in the cameras gallery folder. 4. You can view the photos by clicking the preview box button.You may adjust various settings for the camera by pressing Menu while in the camera interface. When in the camera viewfinder mode, you can switch to video or photos gallery. 23 Settings Select between Camera & Video 24 Gallery Open Images Applications Menu Gallery Share Pictures You may share pictures by sending them through different types of installed applications. You may also send pictures through the MMS message function by composing a message and attaching the picture. Any image can also be sent via the Bluetooth function by selecting Bluetooth equipment that has been paired. Adjust Image Press Menu and Edit to adjust images You may select from different effects that may include:

25 Vintage, Black and White, Instant, Latte, Litho, X-Process, Crop, Rotate, Mirror, Straighten, Vignette, Contrast, Exposure, Auto color, Shadows, Vibrancy, among other settings that can be used to adjust picture images. View Images In the picture interface, click on an album to view images In the photo album, scroll the picture towards left to view the next picture or towards right to view the previous one. Crop Pictures If you want to adjust the size of the picture, use the crop tools. Once the arrow appears, pinch your fingers in or out to adjust the size. If you want to adjust the image and keep its proportion, please hold down any of the four corners of the image and adjust accordingly. 26 Music Open Music Application Menu Music Search Music You may choose to search for music from media folder through artist name, song name, album name. The following formats are available: AMR, MIDI, MP3, WAV, and OGG. 27 Sound Recorder The recorder uses 3GPP and OGG format. Record The Sound Recorder can record voice or any audio. You may send any recorded audio via Bluetooth or MMS and also have the option to make any recorded audio the phones default ring tone.

-Keep the phones microphone near the voice source.

-Click the record button to record the audio.

-Click the stop button to stop recording the audio. All recordings will be saved in the recording folder in the default music program and can be accessed from the sound recorder application. Recording Controls 28 Alarm Clock 1. Click on the Clock icon in the application menu 2. Click set alarm button and enter the alarm clock set interface where you may delete and edit alarms Click to edit alarms Click to delete alarms Click to add alarms 29 Google Play Google Play allows you to download music, movies, and even games. Click the Play icon to sign in with your Google account. 30 Search and select between different Play Store categories 31 Settings Wi-Fi Settings network & Internet Wi-Fi to power on. When on, the Wi-Fi will automatically search for available networks. Any unsecured network can be used directly and any secured network requires a password or credentials prior to connection. Connected devices Press the switch to power on Bluetooth. Once on, the Bluetooth will automatically scan for any nearby open equipment .You can also use Cast ,PrintingNFC, Nearby Share and check Received files. Press NFC, you can setup different NFC modes ,such as P2P mode ,TAG mode , Card emulation and TAP & PAY Press the switch to power on Nearby Share. Once on, Nearby share will automatically scan for any nearby open equipment . 32 33 Apps & notifications Press the check recently opened apps and manage notifications options. Battery General power usage Display Sound Storage Brightness, Auto rotating screen, Wallpaper, Screen Timeout This option sets the phone tone settings for receiving calls and notifications. Some of the settings include:

Vibrate, volume, ring tones, ring tones notification, dial touchpad, and haptic feedback and tones 34 View the phone memory usage. Security & location Set up screen locks: Use slide, face/voice unlock, pattern, PIN or password to lock the screen. Pattern: The first time there will be simple unlock instructions and examples. Click next step to continue the security pattern step. PIN: Enter PIN number to unlock the screen. Password: Use password to unlock the screen You may stop the security feature at any time. Set up SIM card PIN lock SIM card PIN (Personal Identification Number) is used to prevent unauthorized use of SIM card. To change a blocked PIN code, you will need to unlock the SIM lock then go to the Change Password screen. The phone will automatically prompt you enter the old PIN code and ask to enter a new PIN code twice. The phone will then prompt you that the change was successful. If you enter the PIN incorrectly three times, the SIM and PIN codes will be automatically locked. You will need the PUK code to unlock the phone which is available through your service provider. If you enter the PUK code incorrectly 10 times, the SIM card 35 will be permanently locked. Please see your service provider for a new SIM card. Password visible Make the password visible when its typed. Use security credentials - Allow applications to visit security credentials or other credentials. Mobile Network Location - Use wireless services to find locations in applications. When using the GPS, power on to set satellite positioning for accuracy. Accounts Add accounts,include DuoExchangeGooglePersonal(IMAP)Personal(POP3) Accessibility Power button ends call and auto rotate screen Speak Passwords and large text Google Google account and google services 36 DuraSpeed DuraSpeed helps boost the foreground APP by restricting background APPs;some notifications may be postponed or not received. Language Change the language of the phone. Custom Dictionary - Add or delete words to the custom dictionary. Keyboard Settings Haptic vibration, Haptic tones, Capitalizing, Speech Input, Inputting words, Predictive text function, Auto-Text, Input keyboard method System Language and Input Gestures Jump to camera Prevent ringing 37 Date & Time Date and Time adjustment. Time Zone - Select Time Zone according to where your location. Select Date Format - There are 3 kinds of formats you can choose from:

Month-Day-Year, Day-Month-Year and Year-Month-Day, and Year-Month-Day which is the default setting Backup Backup Data Will back up all application data, WLAN passwords, and other settings to Google's servers Restore to Factory Settings - Clear all data stored on the phone. Reset options About phone DRM reset; reset Wi-Fi, mobile & Bluetooth ;reset app preferences ;Erase all data Phone information status and build number 38 Storage Connect the phone with the USB cable provided. Once connected, a connection interface will appear. In the connection mode interface, select MTP and turn on from the connection screen to be able to transfer files. Other storage options are also available. 39 40 Some system settings, hardware, and UI options may vary depending on final version. Regulatory Information 41 FCC Rules Compliance Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired operation. This Product meets the government's requirements for exposure to radio waves. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons regardless of age or health. FCC RF Exposure Information and Statement the SAR limit of USA (FCC) is1.6 W/kg averaged over one gram of this Device Zmbizi Z2 (FCC ID: 2AUYV-ZMBIZI-Z2) has been tested against this SAR limit. SAR information on this can be viewed on-line at http://www.fcc.gov/oet/ea/fccid/. Please use the device FCC ID number for search. This device was tested for typical operations 10mm from the body. To maintain compliance with FCC RF exposure requirements, 10mm separation distance should. maintained to the user's bodies 42 NOTE:

However, This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radiofrequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

-- Reorient or relocate the receiving antenna.

-- Increase the separation between the equipment and receiver.

-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-- Consult the dealer or an experienced radio/TV technician for help. Google, Google Play and other marks are trademarks of Google LLC. 43

=a 30 mm 7 / Model: ZmBizi 22 Purple YL FCC ID: 2AUYV-ZMBIZI-Z2 IMEI 1: 357261770100011 HATTA A IMEI 2: 357261770100029 HOM UAUAMUA SN: ZMBIZIZ2010001 HON Designed by ZmBIZI in California Assembled in China All logos trademarks of their respective owners i

95893"65605 re x

=a 30 mm 7 / Model: ZmBizi 22 Purple YL FCC ID: 2AUYV-ZMBIZI-Z2 IMEI 1: 357261770100011 HATTA A IMEI 2: 357261770100029 HOM UAUAMUA SN: ZMBIZIZ2010001 HON Designed by ZmBIZI in California Assembled in China All logos trademarks of their respective owners i

95893"65605 re x

ZMBIZI APP LLC Date: Nov 22, 2021 FCC ID: 2AUYV-ZMBIZI-Z2 Model Number: Zmbizi Z2 To:

Federal Communication Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21048 To Whom It May Concern, We, b mobile HK Limited, declare that this EUT (2AUYV-ZMBIZI-Z2) will conduct FCC compliance testing, the DOC part recognized test lab(Shenzhen NTEK Testing Technology Co., Ltd.( ShenZhen Lab.). 1/F, Building E, Fenda Science Park, Sanwei Community,Xixiang Street Baoan District, Shenzhen 518126 P.R. China) Please contact me if you have any question. Sincerely, ALPESH PATEL / Manager Date/City:

Phone:

Fax:

E-mail:

2021-09-22/Shenzhen 2124332888 3104998584 AP@ZMBIZI.COM

ZMBIZI APP LLC FCC Software Configuration Control Declaration Date: September 17, 2021 Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Attn: OET Dept. Product/ Model Number: Zmbizi Z2 4G Smart Phone / Zmbizi Z2 Regarding FCC Country Code Selection guidelines identified in KDB 594280. All applications for equipment authorization for transmitters that can have radio parameters, or other technical parameters, reported to the Commission set by software must have an attestation indicating that no third party will have software, or configuration control, to program the device out of compliance of the technical rules under which it has been certified. We declare that no third party will have software, or configuration control, to program the device out of compliance of the technical rules under which it has been certified. Name: ALPESH PATEL Date: 2021/09/17 Title: Manager Signature of applicant FCC Software Configuration Control Declaration

ZMBIZI APP LLC Agent Authorization Letter

(2021-09-17) MET Laboratories, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: LETTER OF AGENT AUTHORIZATION To Whom It May Concern:

We, the undersigned, hereby authorize Shenzhen NTEK Testing Technology Co., Ltd. 1/F, Building E, Fenda Science Park Sanwei, Xixiang, Bao'an District, Shenzhen, Guangdong, China Alex.li alex.li@ntek.org.cn to act on our behalf in all matters relating to application for equipment authorization, including the signing of all documents relating to these matters. We also hereby certify that no party to the application authorized hereunder is subject to the denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C.853(a). This agreement expires one year from the current date. Sincerely, ALPESH PATEL / Manager Date/City:

Phone:

Fax:

E-mail:

2021-09-17/Shenzhen 2124332888 3104998584 AP@ZMBIZI.COM

ZMBIZI APP LLC Long Term Confidentiality Request Letter

(2021-09-17) MET Laboratories, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: CONFIDENTIALITY REQUEST FOR Product: Zmbizi Z2 4G Smart Phone Model No.: Zmbizi Z2 FCC ID: 2AUYV-ZMBIZI-Z2 To Whom It May Concern:

This letter serves as an official request for confidentiality under sections 0.457 and 0.459 of CFR 47. We have requested that the Schematic Diagram Block Diagram Part List / BOM List / PCB Layout Operational Description Tune-up Procedure FCC Software Security Requirements for UNII devices Required to be submitted with this application be permanently withheld from public review. Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Please contact me if there is any information you may need. Sincerely, ALPESH PATEL / Manager Date/City:

Phone:

Fax:

E-mail:

2021-09-17/Shenzhen 2124332888 3104998584 AP@ZMBIZI.COM

ZMBIZI APP LLC Short Term Confidentiality Request Letter

(2021-09-17) MET Laboratories, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: Short Term Confidentiality Request For Product: Zmbizi Z2 4G Smart Phone Model No.: Zmbizi Z2 FCC ID: 2AUYV-ZMBIZI-Z2 To Whom It May Concern:

In accordance with sections 0.457 and 0.459 of CFR 47, < ZMBIZI APP LLC >. requests short-term Confidentiality of following sections of this application for a period of 180 days after grant is issued. Test setup photos External photos Internal photos Users manual These documents contain detailed system and equipment descriptions and related information about the product, which < ZMBIZI APP LLC > considers to be proprietary, confidential, and a custom design and otherwise, would not release to the general public. Since this design is a basis from which future technological products will evolve, < ZMBIZI APP LLC > feels that this information would be of benefit to its competitors, and that the disclosure of the information in these documents would give our competitors an unfair advantage in the market. Please contact me if there is any information you may need. Sincerely, ALPESH PATEL / Manager Date/City:

Phone:

Fax:

E-mail:

2021-09-17/Shenzhen 2124332888 3104998584 AP@ZMBIZI.COM