Zoom Mobile Broadband Modem/ Router with WirelessN Users Guide ZoomTelephonics, Inc. Zoom Mobile Broadband Modem/
Router with Wireless-N Users Guide 1 Zoom Mobile Broadband Modem/ Router with WirelessN Users Guide Content Introduction 3 1 Features 3 1.1 1.2 Interface description 5 2 Web management interface 7 2.1 Login Router 7 3 Quick Setup 7 4 Router Setting 8 4.1 Port Status 8 4.2 3G Information 9 4.3 statistics 9 4.4 ACS Client10 4.5 DHCP Client 11 5 Internet Settings 11 5.1 WAN Setup 11 5.1.1 3G Mode 11 5.2 Static Routing 12 6 LANSetting 13 6.1 LAN IP Setup13 7 Firewall 14 7.1 Port Forwarding 14 7.2 Virtual Server14 7.3 IP/MAC Filter 16 7.4 DMZ 17 7.5 system Security 17 7.6 URL filter 18 8 Application18 8.1 USB Storage18 USB Printer20 8.2 8.3 USB Web Cam 20 8.4 DDNS 20 8.5 NTP Setting 21 8.6 PIN Setting 21 9 Administration 22 9.1 System Settings22 9.2 Router Upgrade 23 9.3 System Log 23 10 Save/Reboot 24 2 Zoom Mobile Broadband Modem/ Router with WirelessN Users Guide Specification Wi-Fi: IEEE 802.11b/g/n Ethernet: IEEE 802.3u HSUPA uplink up to 5.76Mbps HSDPA downlink up to 7.2 Mbps WCDMA (UMTS) uplink data rate up to 384 kbps EDGE data up to 237 Kbps DL and 118Kbps UL, 3GPP Release 4, class 12 GPRS data up to 85.6 Kbps DL and 42.8 Kbps UL Circuit switched data: 14.4 and 9.6 Kbps HSPA DL 21.6Mbps UL 5.76 Mbps HSPA+ DL14.4 Mbps UL 5.76Mbps HSPA DL 7.2Mbps UL 5.76 Mbps UMTS DL/UL 384 kbps GPRS DL 85.6 kbps / UL 42.8 kbps EDGE 3GPP R4, Category 12, DL 237k bps /
UL 118K bps 1 external antenna for 3G 2 internal antennas for Wi-Fi WIFI external antenna: 5dbi WIFI internal antenna: 2.7dbi 3G Antenna: 5dbi 4 LAN ports,1Power,1 Power Switch,1 Antenna,1 USB,1 S(U)IM card slot Should support Quad-band for 2G (850, 900, 1800, 1900 MHz) & tri band for 3G (850, 900, 1900 , 2100 MHz) optional WiFi:2.4-2.4835GHz 3G:24dBm(Maximum) WiFi:22dBm(Maximum) Introduction 1 1.1 Features No. Items 1 Standard 2 Data Rate (HSUPA) 3 Data Rate(HSPA+) Antenna Port Band RF Power 4 5 6 7 8 Receiver Sensitivity(3G) less than -106.7 dBm 3 Zoom Mobile Broadband Modem/ Router with WirelessN Users Guide 9 10 11 Power Size Environment Power Adapter connection (DC12V/1A) 142*98*20(mm) i) Work temperature : -0 to +40 ii) Storage temperature : -20 to +70 iii) Relative Humidity : -10% to 90%
4 Zoom Mobile Broadband Modem/ Router with WirelessN Users Guide 1.2 Interface description 1 Power switch 2 Power jack 3 USB port 4 5 RJ-45 ports for 10/100 Base-T Ethernet LAN 6 S(U)IM card slot 7 Reset button Invalid port 8 WPS button 5 1.3 Hardware connection guide Zoom Mobile Broadband Modem/ Router with WirelessN Users Guide 6 Zoom Mobile Broadband Modem/ Router with WirelessN Users Guide 2 Web management interface 2.1 Login Router 1. Connect LAN adapter on your PC with one of LAN port of this wireless router, then power on it. PC will get an IP address. 2. Run web browser on your PC(e.g.IE), type http://192.168.1.1 in the address field, then press Enter, shown as follow figure, Input default User name root and default password root, then click OK button. 3. Then the following interface appears. 3 Quick Setup 7 Zoom Mobile Broadband Modem/ Router with WirelessN Users Guide 4 Router Setting 4.1 Port Status It will show some information to you. 8 Zoom Mobile Broadband Modem/ Router with WirelessN Users Guide 4.2 3G Information It will show some information about the network. 4.3 statistics It shows the statistics data. 9 Zoom Mobile Broadband Modem/ Router with WirelessN Users Guide MemoryThe display the router memory total size and the remainingsize. WAN/LAN: ShowWAN/LANtransceiverpacketsituation. RA0:ShowWirelesstransceiverpacketsituation. 4.4 ACS Client ItshowstheinformationoftheACSClient. Inform:Setthestatusoftheinformfunction. InformInterval:Settheinformintervaltime. ACSURL:SettheURLoftheACSserver. 10 Zoom Mobile Broadband Modem/ Router with WirelessN Users Guide 4.5 DHCP Client This page shows DHCP client information such as host name, MAC address, IP address and lease time. 5 Internet Settings 5.1 WAN Setup 5.1.1 3G Mode According to your network environment to choose the different connection mode and configure the APN parameters. When you click on the Apply button, system will be reconfigured. If you want to disconnect the 3G net, click on the disconnect button. Net Mode: Choose 3G or 2G mode. It will try to use 3G mode at first when you choose 11 Zoom Mobile Broadband Modem/ Router with WirelessN Users Guide auto. APN: APN (Access Point Name) is a configurable network identifier. PDP Context: A Packet Data Protocol (PDP) context. Dial Number: It is the dial number which will be used when you create a Dial-Up connection with 3G. Username: It is the user name which will be used when you create a Dial-Up connection with 3G. Password: It is the password which will be used when you create a Dial-Up connection with 3G. Authentication: You can choose Password Authentication Protocol (PAP) or Challenge Handshake Authentication Protocol (CHAP) to pass the Authentication. Operation Mode:
Auto: The 3G Modem automatically dials to access internet when it is switched on. Manual: The 3G Modem dials to connect internet by clicking connect the connection page of the management console. On Demand: The 3G Modem automatically dials to connect internet when you attempt to send data through internet. Apply & Disconnect: connect or disconnect the 3G dial. 5.2 Static Routing Itshowssomeinformationofthestaticrouting. Dest IP: Enter the IP address of the packets that will take this route Host/Net:Single IP address or an entire network segment Netmask:Enter the subnet mask to specify the subnet of the IP packets that will take this route. Gateway:Enter the next hop that will be taken if this route is used. Comment: Remark your defined rule. 12 Zoom Mobile Broadband Modem/ Router with WirelessN Users Guide 6 LANSetting 6.1 LAN IP Setup You can configure the LAN port parameters here. IP Address: Set LAN IP address of the router. IP Subnet Mask: Set subnet mask of the router. LAN 2: Add the LAN IP address, so that LAN users can connect to the router through the LAN network. Starting IP Address & Ending IP Address: The IP range obtained through DHCP by LAN host. Subnet Mask: The subnet mask obtained through DHCP by LAN host Default Gateway: Gateway obtained through DHCP by LAN host. DefaultDNS Primary IP: DNS server obtained through DHCP by LAN host (If enabled DNS Proxy, you had better fill the LAN IP address, so that when the router DNS change, dont reset this). DNS Secondary IP: If you cant connect the DefaultDNS Primary IP address, router will try to connect this IP address. UPNP:To use the Universal Plug and Play (UPnP) feature click on Enabled. UPNP provides compatibility with networking equipment, software and peripherals. DNS proxy: Choose enable if you want to get DNS service. 13 Zoom Mobile Broadband Modem/ Router with WirelessN Users Guide 7 Firewall 7.1 Port Forwarding IP Address:Enter the IP address of the computer on your local network that you want to allow the incoming service to. Protocol: Enter the TCP and/or UDP port or ports that you want to open. You can enter a single port or a range of ports. Separate ports with a common. Example:
24,1009,3000-4000 Comment: Enter a name for the rule or select an application from the drop-down menu. Select an application and click to populate the fields. 7.2 Virtual Server Virtual host can be achieved through the public IP address to access web or FTP services, and the remote user automatically shifted to the local LAN server. You can define a virtual server service port, external network services all requests to this port will be redirected to the designated router LAN server (specified by IP address), so that users outside the network can successfully access the LAN server, without affecting the internal LAN network security. 14 Zoom Mobile Broadband Modem/ Router with WirelessN Users Guide IP Address:Enter the IP address of the computer on your local network that you want to allow the incoming service to. Public Port/Private Port: Enter the port that you want to open next to Private Port and Public Port. The private and public ports are usually the same. The public port is the port seen from the Internet side, and the private port is the port being used by the application on the computer within your local network. Protocol:Select TCP, UDP, Both or Other from the drop-down menu. Comment: Enter a name for the rule or select an application from the drop-down menu. Select an application and click to populate the fields 15 Zoom Mobile Broadband Modem/ Router with WirelessN Users Guide 7.3 IP/MAC Filter This function is used to configure disable or enable firewall function. Only when the firewall is enabled, access management filter settings IP filter, MAC filter and Port filter can take effect. Otherwise, those functions are disabled. Mac/IP/Port Filtering: Select "Disable", this function does not take effect, select
"Enable", the effect of this function. Default Policy: The packet that doesnt match with any rules would be dropped or accepted. MAC Address: Enter the MAC address to define the rules. Dest IP Address: Enter the destination IP address filtering. Source IP Address: Enter the local IP address filtering. Protocol: Select the protocol of the controlled packet. Dest Port Range: Enter the port range to drop or accept. Action: Rule is defined to drop or accept, in contrast with default policy. Comment: Remark your defined rule. 16 Zoom Mobile Broadband Modem/ Router with WirelessN Users Guide 7.4 DMZ Receive all the data from external network interface forwarded to DMZ IP address. Enable DMZ: If an application has trouble working from behind the router, you can expose one computer to the Internet and run the application on that computer. Note: Placing a computer in the DMZ may expose that computer to a variety of security risks. Use of this option is only recommended as a last resort. DMZ Address: Specify the IP address of the computer on the LAN that you want to have unrestricted Internet communication. 7.5 system Security Remote Management: Enable this function, it will allow access Web management pages through the external network interface. PING from wan Filter: Enable this function, it will allow PING router via external network interface. SPI Status: Select Enable, to activate the SPI firewall. 17 7.6 URL filter Zoom Mobile Broadband Modem/ Router with WirelessN Users Guide URL Filters: Select Deny computers access to only these sites. Reset: Click to delete all entries in the list. Keyword Filters: Enter the keywords or URLs that you want to deny. 8 Application 8.1 USB Storage 18 Zoom Mobile Broadband Modem/ Router with WirelessN Users Guide User Name/Password: Add a user to use the SAMBA server. FTP Server: Enable/Disable the FTP Server competence. SAMBA Server: Enable/Disable the SAMBA Server competence. Folder List:Display USB storage folder. Delete: Selected a folder to delete. Folder Add: Adding a new folder. 19 Zoom Mobile Broadband Modem/ Router with WirelessN Users Guide SAMBA Server: Enable/Disable the SAMBA Server. SAMBA Work Group:Enter the name of the SAMBA Working Group. Net Bios Name:Enter the name of the Net Bios. Add/Edit Directory Permit:Allows users to access files 8.2 USB Printer USB Printer Server:Enable/Disable the USB Printer Server. 8.3 USB Web Cam Web Camera: Enable/Disable the Web Camera. Resolution: You can choose 640x480, 320x240, 160x120 resolution. Frames Per Second: You can choose 5,10,15,20,25,30 frames. Port: Access to the camera's need the port number. 8.4 DDNS This function allows you to provide Internet users with a domain name (instead of an IP address) to access your virtual servers. This router supports dynamic DNS service provided by the provider http://www.dyndns.org or http://www.freedns.afraid.org. Please register this service at these providers firstly. 20 Zoom Mobile Broadband Modem/ Router with WirelessN Users Guide DDNS Provider: Select the website provides dynamic domain name service. Account: Login registered username on the DDNS provider. Password: Password registered on the DDNS provider. DDNS: Domain name registered on the DDNS provider. 8.5 NTP Setting Time ZoneSelect the time region. NTP ServerEnter network time protocol Server. NTP synchronizationSynchronization time with NTP server. 8.6 PIN Setting PIN Code: Enter the PIN Code to Unlock PIN. 21 Zoom Mobile Broadband Modem/ Router with WirelessN Users Guide PIN Enabled: Enable/Disable the S(U)IM card PIN function. PUK:PIN Unlocking Key, unlock PIN code (PIN1) Modify PIN: Modify the S(U)IM card PIN Code. 9 Administration 9.1 System Settings You can set the account and the password which used to login. 22 Zoom Mobile Broadband Modem/ Router with WirelessN Users Guide Apply: system will be restored the factory settings. 9.2 Router Upgrade Update Firmware: After you have downloaded the new firmware, click Browse to locate the firmware update on your hard drive. Click Upload to complete the firmware upgrade. 9.3 System Log Display the log information of starting and running system. 23 Zoom Mobile Broadband Modem/ Router with WirelessN Users Guide Display the log information of 3G dial-up. 10 Save/Reboot Reboot System: system will be rebooted. Save/Reboot: system will save the configuration and reboot. Reboot System: system will be reboot. FCC Statement Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful 24 Zoom Mobile Broadband Modem/ Router with WirelessN Users Guide interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions (1)this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation Contains Inside FCC ID:QISMU609 25