onn. Item Locator Quick Start Guide Getting Started o1 Add Your Item Locator 02 Locate Your item 03 Find Item When Out of Range | 04
| When Your Item is Lost 05 1. Power On/Off
+ Press your tem Locator function button once toturn on--it should beep once indicating it
| powered on
+ To power off, hold the same button for at least 3 seconds. You will hear 2 beeps indicating your item Locator is powered off 2. Check For Updates:
+ To.use the Apple Find My app or the Find items app on Apple Watch to locate your Item Locator, the latest version of iOS, PadOS, watchOS or macOS is recommended Function Button 1. Startthe App
+ Open Find My app on your supported iPhone or iPad
+ Allow notifications from the app 2. Connect your Item Locator
+ Power on your tem Locator
+ Tap "+" then Add Other tern
+ Once your Item Locator is located, tap Connect
+ Choose a recognizable name and emoj for your Item Locator and tap Continue
+ Find My wil ask for confirmation to add your Item Locator to your Apple ID - tap Continue~
+ Tap "Finish" and your tem Locator willbe set up and ready to be connected to whatever item you wish to locate, e.g, your keys 1. Find Item Locator when tis Nearby
+ Open Find My app and select the items tab or open the Find Items app on your Apple Watch
+ Tap on your Item Locator from the list
* Tap "Play Sound" to make your lem Locator beep
+ Tap "Stop Sound to stop the beeps once you find your item 2. Find item Locators Last Known Location
+ Open Find My app and select the items tab or open the Find items app on your Apple Watch
+ Tap on your Item Locator from the list
+ Your Item Locator lat known location will appear on the map
+ To navigate o that last known location, tap, Directions to open the Maps opp 1. Enabling Notify When Left Behind
+ Open Find My app and select the items tab or open the Find Items app on your Apple Watch
+ Tap on your item Locator from the list
+ Under Notifications enable the Notify When Left Behind toggle
+ You will receive a notification when you leave your item Locator behind and its no longer in range of your device 2. Enabling Notity When Found
+ Under Notifications enable the Notify When Found toggle
+ When your Item Locator is seen by another Find My enabled device, you wil eceive a notifcation of its updated location
+ Note: Notify When Found" can only be activated when your tem Locator is out of range 1. Enabling Lost Mode
+ Open Find My app and select the items tab or open the Find items app on your Apple Watch
+ Tap on your tem Locator from the list
+ Under Lost Mode", tap Enable
+A screen detailing Lost Mode will pop up, tap Continue
+ Enter your phone number or email address and tap Next
+ You may enter a message thet will be shared with the person that finds your item
+ Tap "Activate" to enable Lost Mode Note: When "Lost Mode" is enabled, "Notify When Found is automatically enabled
+ Note: When Lost Mode" is enabled, your Item Locator is locked and cannot be paired toa new device Getting Started 01 Getting Started 1. Power On/Off:
Press your Item Locator funetion button once toturn on it should beep once indicating it
's powered on
+ To power off, hold the same button for at least 3 seconds. You will hear 2 beeps indicating your item Locator is powered off 2. Check For Updates:
+ To use the Apple Find My app or the Find items app on Apple Watch to locate your lem Locator, the latest version of iOS, iPadOS, watchOS or macOS is recommended Function Button 11 Power On/Off:
+ Press your Item Locator function button once toturn on--it should beep once indicating it
's powered on
+ To power off, hold the same button for at least 3 eeconds, You will hear 2 beeps indicating your item Locator is powered off 2. Check For Updates:
+ To.use the Apple Find My app or the Find items app on Apple Watch to locate your item Locator, the latest version of iOS, PadOS, watchOS or macOS is recommended Function Button Add Your Item Locator 02 pa Your item Locator 1. Startthe App
+ Open Find My app on your supported Phone
+ Mow otfcaions rom the spp 2. Connect your Item Locator Power on your Item Locator Top " then Add Other item"
Once your Item Locator is located, tap Connect
+ Choose a recognizable name and emojifor your Item Locator and tap Continue
+ Find My will ak for confirmation to add your Item Locator to your Apple ID - tap "Continue"
Tap Finish and your Item Locator willbe set up and ready to be connected to whatever item you 9. your keys Startthe App
+ Open Find My app on your supported iPhone or iPad
+ Allow notifications from the app Connect your item Locator
+ Power on your lem Locator Sap" then Add Other Item
+ Once your Item Locator is located, tap Connect
+ Choose a recognizable name and emo) for your Item Locator and tap Continue
+ Find My wil ask for confirmation to add your Item Locator to your Apple ID - tap "Continue"
Tap Finish and your tem Locator will be set up and ready to be connected to whatever item you wish to locate, e.g, your keys Locate Your Item 03 1. Find Item Locator when itis Nearby
+ Open Find My app and select the items tab or open the Find items app on your Apple Watch
+ Tap on your Item Locator from the list
+ Tap Play Sound to make your lem Locator beep
+ Tap Stop Sound to stop the beeps once you find your item Find Item Locator's Last Known Location
+ Open Find My app and select the items tab or open the Find items app on your Apple Watch
+ Tap on your Item Locator from the list
+ Your tem Locators last known location will appear on the map
+ To navigate to that last known location, tap. Directions to open the Maps app ind tem Locator when itis Nearby 3 Find My app and select the Items tab o open the Find items app on your Apple Watch fap on your Item Locator from thelist rap Play Sound to make your lem Locator beep fap Stop Sound to stop the beeps once you find your item ind Item Locators Last Known Location pen Find My app and select the items ta open the Find items app on your Apple Watch fap on your Item Locator from the lst
(our item Locator last known location wil appear on the map, fo navigate to that last known location, tap Directions to open the Maps app Find Item When Out of Range 04 lem When Out of Range 1. Enabling Notify When Left Behind
+ Open Find My app and select the items tab or open the Find items app on your Apple Watch
+ Tap on your Item Locator from the list
* Under Notifications enable the Notify When Left Behind toggle
+ You will receive a notification when you leave Your Item Locator behind and its no longer in range of your device 2. Enabling Notify When Found
+ Under Notifications, enable the Notify When Found" toggle
+ When your tem Locator is seen by another Find My enabled device, you will receive a notifcaton of its updated location
+ Note: "Notify When Found can only be activated when your tem Locator is out of range ling Notify When Left Behind In Find My app and select the items tab or In the Find items app on your Apple Watch Jon your Item Locator from thelist Jer Notifications enable the Notify When Behind toggle il receive @ notification when you leave Item Locator behind and it's ne longer i be of your device J your tem Locator is seen by another H My enabled device, you will receive a fcation ofits updated location Notity When Found can only be activated|
When Your Itemis Lost 05 vur Item is Lost 05 1. Enabling Lost Mode"
+ Open Find My app and select the items tab or open the Find items app on your Apple Watch
+ Tap on your Item Locator from the list
+ Under Lost Mode", tap Enable
+ A screen detailing Lost Mode will op up, tap Continue
+ Enter your phone number or email address and tap "Next"
+ You may enter a message that will be shared with the person tha finds you item
+ Tap Activate to enable Lost Mode"
Note: When Lost Mode is enabled, Notify When Found is automaticaly enabled
+ Note: When Lost Mode" is enabled, your Item Locator is locked and cannot be paired to a new device Diresieoed nd My app il select thu "ome tab of the Fit Inmrcae on yout Arle atch yous Item Lseator frm the Tat host Mon tap "Enter se detalling Last Ned will pop in, mp Ree Sapo mbt mal en ni ry ani rszag tl ha it Wn "Lot Mode is anibled your toa he locknd ane! ean bie to 8 nw Resetting Your Item Locator 06 And more o7 The Fine Print 1. Remove the item Locator from Find My" app Open Find My app and select the Items tab
+ Tap on your Item Locator from the list
+ Please ensure Lost Mode is disabled
+ Scroll to the bottom of the screen and tap
"Remove item"
+A summary will open, tap Remove" to confirm 2. Factory Resat Your Item Locator:
+ Alter successfully removing the tem Locator from Find My app. press the Item Locators function button four times rapidly, you will hear 1 beep each time you press it and then hold ita fifth time until you hear a ringing chime The tem Locator is now reset and ready to be paired to a new device 1. Replace the Battery:
+ Use your fingernails at the small gap on the sie of your tem Locator to carefully open the case
+ Roplace the battery witha new CR2032 battery placing positive side up (text facing up)
+ Carefully align the top hole on both sides to close 2. Unwanted Tracking Detection:
+ If any Find My network accessory soparated from its owner i sen moving with you overtime, youl be rotted in one of two ways: (1) you have an Phone Pad, or Pod touch, Find My wil send a notification to your Apple device. This feature is avaiable on 0S or IPadOS 145 or later. (2) If you don't have an iOS evice or smartphone, a Find My network accessory that isnt with ts owner fr a period of time will emit a sound when its moved, These features were Created specifialy to discourage people from trying to tack you without your knowledge. This device complies with part 15 of the FCC Rules. Operation is subject to the following twa conditions:
(0) This device may not cause harmful interference, and (2) this device must accept any interference feceived, including Interference that may cause Uundesired operation. NOTE: The manufacturer is hat responsible for any radio or TV interference caused by unauthorized modifications or changes 10 this equipment. Such modifications or changes not expressly approved by the party responsible for compliance could vold the users authority to operate this device, The device has been evaluated to meet general RF exposure requirement, The device can be used in portable exposure condition without Festrition, Federal Communication Commission (FCC) Radiation Exposure Statement Power is so lowthat no RF exposure calculation is needed This equipment has been tested and. found to comply with the limits for a Class B digital deviee, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential instalation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful Interference to radio communications. However, there is no guarantee that interference wil not occur in a particular installation, If this equipment does cause Farmful interference to radio of television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the Interference by one or more of the following measur Reorient or relocate the receiving antenna. Increase the separation between the equipment and receive. Connect the equipment into an outlet on a circu different from that ta which the receiver is connected, Use of the Works with Apple badge means. that 2 product has been designed to work specifically Wwith the technology identified in the badge and has been certified by the product manufacturer to meet Apple Find My network product specifications and requirements. Apple is not responsible for the operation of this device or use ofthis product or its compliance with safety and regulatory standards
( Apple, Apple Watch, watchOS, iPad, iPadOS, iPod touch, Mac, and macOS are trademarks of Apple Inc. fegistered in the US. and other countries. 10S is a trademark or registered trademark of Cisco in the US. nd other countries and is used under license. Pz And more Use of the Works with Apple badge means. that 2 product has been designed to work specifically with the technology identified in the badge and has been certified by the product manufacturer to meet Apple Find My network product specications and requirements. Apple is not responsible for the operation of this device or use of this product or its compliance wit safety and regulatory standards. Apple, Apple Watch, watchOS, iPad, iPadOS, iPod touch, Mac. and macOS are trademarks of Apple Inc., and other countries and is used under license, Resetting Your I Resetting Your temtocator Pall OO Remove the Item Locator from Find My" app Open Find My app and select the tems tab
+ Tap on your Item Locator from the list
+ Please ensure Lost Mode is disabled
+ Serol to the bottom of the screen and tap
"Remove item
+A summary will open, tap "Remove" to confirm 2. Factory Reset Your Item Locator:
+ After successfully removing the Item Locator from Find My app, press the tem Locator function button four times rapidly, you will hear 2 beep each time you press it and then hold ita fifth time until you hear a ringing chime
+The item Locator is now reset and ready to be paired to anew device 1 Remove the Item Locator from Find My" app
+ Open Find My app and select the items tab
+ Tap on your Item Locator from the lst
+ Please ensure Lost Mode" is diab
+ Serol to the bottom of the screen and tap Remove item summary will pen, tap Remove to confirm 2. Factory Reset Your Item Locator:
+ After successfully eemoving the tem Locator from Find My app, press the tem Locator function button four times rapidly, you will hear a beep each time you press it and then hold it a fh time until you hear a ringing chime
= The item Locator is now reset and ready to be paired to a new device And more o7 1 Replace the Battery:
+ Use your fingernails at the small gap on the side of your Item Locator to carefully open the case
+ Replace the battery witha new CR2032 battery placing it postive side up (text facing up)
+ Carefully align the top hole on both sides to close 2. Unwanted Tracking Detection:
if any Find My network accessory separated from is owner is seen moving with you overtime, youtl be notified in one of two ways: (1) you have an iPhone, iPad, or iPod touch, Find My wil send a notification te your Apple device. This feature is avaliable on iOS or iPadOS 14.5 o later. (2) f you don't have an iOS device or smartphone, a Find My network accessory that isnt with is owner for a period of tie will emit 8 sound when its moved. These features were created specifically to discourage people from trying
$6: Vidh paaicbokt your basoade. Replace the Battery:
+ Use your fingernails at the smal gap on the side of Your Item Locator to carefully open the case
+ Replace the battery witha new CR2032 battery placing it positive side up (text facing up) Unwanted Tracking Detection:
owner is seen maving with you overtime, youl be notified in one of two ways: (1) you have an iPhone, iPad, or iPod touch, Find My wil send a notification te your Apple device. This feature is avaliable on iOS or iPadOS 145 or later. (2) f you don't have an iOS that isn't with is owner fora petiod of time will nit a sound when its moved, These features were Created speciticaly to discourage people from trying Saiek coairbnokt vou baseeaed, This device complies with part 15 of the FCC Rules Operation i subject to the following two conditions
(0) This device may not cause harmful interference, land (2) this device must accept any interference Feceived, including interference that may cause Undesired operation. NOTE: The manufacturer is Rot responsible for any radio or TV interference Caused by unauthorized modifications or changes to this equipment. Such modifications or changes Rot expressly approved by the party responsible for compliance could void the users author operate this device. The device has been evaluated to meet general RF exposure requirement, The device can be used in portable exposure condition without restriction, Federal Communication Commission (FCC) Radiation Exposure Statement Power is so lowthat no RF exposure calculation is needed.
[device complies with part 15 of the FCC Rules ation is subject to the following two conditions:
is device may not cause harmful interference,
(@) this device must accept any interference including Interference that may cause Operation. NOTE: The manufacturer is responsible for any radio or TV interference Jed by unauthorized modifications or changes i equipment. Such modifications or changes fexpressly approved. by the party responsible fompliance could void the user's authority to ate this device, The device has been evaluated eet general RF exposure requirement, The device
@ used in portable exposure condition without ction. Federal Communication Commission (FCC) ption Exposure Statement Power is so lowthat no posure calculation is needed, This equipment has been tested and found to comply with the limite for a Clase 8 digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful Interference in a residential instalation. This fequipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there
{is no guarantee that interference wili not occur in a particular installation. If this equipment does cause harmful interference to radio of television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more ofthe following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit diferent from that to which the receiver is connected 4 10, provide. nmatonable pater int eden na ste ioatallatne TH WN genimates ves and can radlate radio Sy energy arc ot une and nose with the insti, my cate harmful nica to radio corimunieation. However. th mratitee that aterfermnce. will net ood Ie 1 installation. 1 this eqxspmant dows, cakes levee iri cline resp lan be determined by mining the equisment Wt tho ute" in eecauraged tony facarnect Ue ince by one or more of thelallowing measures:
or talocain the receiving antenna, Inoriase ition berwann the equlerndit nd recolven the eauitment into an ouslit gn weit rom thakto which the mcaiver is connected, Use of the Works with Apple badge means. that 2 product has been designed to work specifically th the technology identified in the badge and hhas been certified by the product manufacturer to meet Apple Find My network product specifications
{and requirements. Apple is not responsible for the operation of this device or use of this product or its compliance with safety and regulatory standards Apple, Apple Watch, watchOS, iPad, iPadOS, iPod touch, Mac, and macOS are trademarks of Apple Inc, rogistered in the US. and other countries. 10S is 3 trademark or registered trademark of Cisco in the US. nd other countries and is used under license. fi=d
> Works with Apple badge means that has been designed to work specifically technology identified in the badge and zetified by the product manufacturer to 2 Find My network product specifications aments. Apple is not responsible for the 2f this device oF use of this product or its Seid hed in the US. and other countries. 10S is 3 at registered trademark of Cisco in the US. ountries and is used under license.