all | frequencies |
|
exhibits | applications |
---|---|---|---|---|
manual |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 |
|
User manual | Users Manual | 1.70 MiB | ||||
1 | Cover Letter(s) | |||||||
1 | External Photos | |||||||
1 | Internal Photos | |||||||
1 | ID Label/Location Info | |||||||
1 | ID Label/Location Info | |||||||
1 | RF Exposure Info | |||||||
1 | Test Report | |||||||
1 | Test Setup Photos |
1 | User manual | Users Manual | 1.70 MiB |
IMPORTANT SAFETY INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS Read these instructions All the safety and operating instructions should be read before this product is operated. Keep these instructions The safety and operating instructions should be retained for future reference. Heed all warnings All warnings on the appliance and in the operating instructions should be adhered to. Follow all instructions All operating and use instructions should be followed. WARNING!
WARNING To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. The apparatus shall not be exposed to dripping or splashing and that objects filled with liquids, such as vases, shall not be placed on apparatus. WARNING do not cover. WARNING only use attachments/accessories specified by the manufacturer (such as the exclusive supply adapter, battery etc). WARNING the plug is the main disconnect device and should be used as such. The disconnect device should remain readily accessible. WARNING this active loudspeaker may emit high sound pressure levels. WARNING do not listen too close to the active loudspeaker. WARNING do not listen for an extended period of time at a high sound pressure level. WARNING do not attempt to remove the active loudspeaker chassis, there are no user serviceable parts. WARNING do not plug a guitar into the Camden. WARNING do not insert body parts or objects into the bass port for risk of injury. DANGER of dropping the product. DANGER of sharp corners. MOISTURE AND HUMIDITY The active loudspeaker should be located in a place free from moisture and water. Do not use this apparatus near water. Do not expose it to rain or dripping water. Do not splash water on it. INSTALLATION Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. No naked flame sources, such as lighted candles, should be placed on the active loudspeaker. Do not block any ventilation openings. Install in accordance with the manufacturers instructions. CONNECTION Connect the active loudspeaker according to the instructions in the manual. Connect the active loudspeaker only to the correct mains voltage as shown on the equipment. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit the apparatus. Use only power cables of the type specified in the operating instructions or as marked on the active loudspeaker. Do not substitute the separate power cable included with this active loudspeaker with any other power supply use only the power cable provided by the manufacturer. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. Unplug this apparatus during lightning storms or when unused for long periods of time. Do not install in an area that impedes access to the power plug. Disconnecting the power plug is the only way to completely remove power to the product and the plug must be readily accessible at all times. CLEANING Clean only with dry cloth. MAINTENANCE Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. The internal battery is user replaceable according to the instructions in this manual. Only use batteries recommended by Zound Industries and intended for the Camden active loudspeaker. CAUTION: These servicing instructions are for use by qualified service personnel only. To reduce the risk of electric shock, do not perform any servicing unless you are qualified to do so. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/appartus combination to avoid injury from tip-over. COMPLIANCE MARKS CAUTION: To prevent the risk of electric shock, do not remove cover (or back plate). There are no user serviceable parts inside. Refer servicing to qualified service personnel. This appliance may not be treated as regular household waste. Management of WEEE (Waste Electrical and Electronic Equipment) is applicable in member states of the European Union and other European countries with individual national policies on the management of WEEE. If you need more information on the collection, reuse and recycling systems, please contact your local or regional waste administration facility. Japan PSE Mark. The product complies with the following standards J60065 (H23), ARIB STD T-66 Ver.3.6, J55013 (H22). This product conforms to ANSI/UL Std. 60065 and is Certified to CAN/CSA Std. C22.2 No. 60065. The product complies with the following European directives: the electromagnetic compatibility directive 2004/108/EC. The low voltage directive 2006/95/EC. KAGA HIGHTEC CO. LTD 3114849 is a Class This equipment insulated electrical appliance. designed require a safety connection to electrical earth. II or a double It has been it does not in such a way that This device complies with Part 15 rules FCC. Operation is subject to two following conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment. This device complies with Industry Canadas licence-exempt RSSs. Operation is subject to to the following two conditions:
(1) This device may not cause interference; and
(2) This device must accept any interference, including interference that may cause undesired operation of the device. Cet appareil est conforme aux CNR exemptes de licence d'Industrie Canada . Son fonctionnement est soumis aux deux conditions suivantes :
( 1 ) Ce dispositif ne peut causer d'interfrences ; et
( 2 ) Ce dispositif doit accepter toute interfrence , y compris les interfrences qui peuvent causer un mauvais fonctionnement de l'appareil. The content of this document is for information purposes only. Zound Industries reserves the right to change information without prior notifications and at any time. 002. LANGUAGE INDEX ENGLISH SECTIONS PAGE 001. SAFETY INSTRUCTIONS 002. COMPLIANCE MARKS 003. LANGUAGE INDEX 005. THE CAMDEN 006. BOX CONTENTS 008. GENERAL DESCRIPTION 011. TURNING THE POWER ON/OFF 012. ADJUSTING THE SOUND 013. CHARGING THE BATTERY YOUR DEVICES 014. USING THE CAMDEN WITH 015. CHOOSING YOUR SOURCE 016. BLUETOOTH CONNECTION 020. CABLE CONNECTION 022. STANDBY MODES 025. REPLACING BATTERY 027. TECHNICAL INFORMATION 028. TROUBLE SHOOTING 032. WARRANTY INFO FRENCH - FRANAIS PAGE 029 JAPANESE -
PAGE 057 GERMAN - DEUTSCH PAGE 085 SPANISH - ESPAOL PAGE 113 ITALIAN - ITALIANO PAGE 141 SIMPLIFIED CHINESE -
PAGE 169 TRADITIONAL CHINESE -
PAGE 197 NOTE: ONCE TRANSLATION IS DONE CHANGE PAGE NUMBERS TO MATCH 004. CAMDEN YOU ARE NOW A OWNER OF A MARVELLOUS ACTIVE STEREO LOUDSPEAKER. THE CAMDEN IS PORTABLE WITH BIG SOUND AND MODEST SIZE. IT IS YOUR TICKET TO THE OUTDOORS SO GET OUT AND ENJOY THE WEATHER. THE CAMDEN IS NOT ONLY EASY TO CARRY BUT PACKING UP TO 20 HOURS OF PLAYING TIME. IT IS THE PERFECT COMPANION WHETHER ITS A SUNNY DAY IN THE PARK, RELAXING ON THE BALCONY OR THAT WEEKEND CAMPING TRIP. YES, YOU WANT TO EXPERIENCE YOUR FREEDOM RIGHT AWAY, BUT JUST A SEC. READ THIS MANUAL CAREFULLY AND HOLD ON TO IT, ALONG WITH THE INCLUDED WARRANTY INFORMATION IN CASE YOU EVER NEED IT. THE CAMDEN IS QUITE COMPACT AND TINY, BUT AS A TRUE MARSHALL, IT WILL SURPRISE YOU. WERE NOT JOKING - ITS LOUD. DESPITE BEING LOUDER THAN MOST, THE SOUND IS STILL WELL DEFINED AND BALANCED. IT CAN BE EVEN FURTHER IMPROVED BY TWEAKING THE ANALOGUE CONTROLS TO YOUR LIKING. JUST LIKE ITS OLDER SIBLINGS THE CAMDEN HAS THAT CLASSIC BEAUTY. WRAPPED IN DURABLE VINYL, WITH THE VINTAGE-STYLE FRONT FRET AND OF COURSE THE ICONIC MARSHALL SCRIPT LOGO. ALL THIS AND THE GUITAR-STYLE STRAP BUTTONS THAT HOLDS THE STURDY CARRY HANDLE GIVES THE CAMDEN A TIMELESS LOOK. CONNECT THE CAMDEN TO YOUR SOUND SOURCE USING THE INCLUDED COIL CORD WITH 3.5MM PLUGS OR CUT THE CORD, CONNECTING IT VIA WIRELESS BLUETOOTH. NOW USE YOUR FREEDOM. GRAB THE CAMDEN BY THE HANDLE AND JOIN YOUR MATES, THEYRE WAITING, AND REMEMBER TO TURN IT UP. BOX CONTENTS 001. USER MANUAL AND WARRANTY INFORMATION 002. DOUBLE-ENDED COIL CORD WITH 3.5MM STEREO PLUGS TO CONNECT TO YOUR MUSIC PLAYER 003. POWER CORD 004. MARSHALL CAMDEN ACTIVE STEREO LOUDSPEAKER 002. 001. 006. CAMDEN 003. CAUTION: LIFT THE CAMDEN ACTIVE LOUDSPEAKER BY THE CARRY STRAP. DO NOT LIFT BY PROTECTIVE BAG FOR RISK OF DROPPING THE PRODUCT. GENERAL DESCRIPTION STEREO PLUG 001. INPUT FOR 3.5MM 002. BATTERY LED INDICATOR 003. SOURCE LED INDICATORS 004. VOLUME KNOB 005. BASS KNOB 006. TREBLE KNOB 007. PAIR BUTTON 008. SOURCE/WAKE BUTTON 009. POWER SWITCH 010. BACK PLATE 011. BASS PORT 012. DETACHABLE CARRY 013. BATTERY HATCH 014. POWER JACK 015. POWER CORD STRAP 001. 002. 004. 006. 008. 003. 005. 007. 009. 008. CAMDEN 012. 011. NOTE: DATE CODE AND SERIAL NUMBER STICKER LOCATED HERE. 010. 013. 014. 014. 015. PLUGGING IN THE CAMDEN LOUDSPEAKER 001. INSERT THE POWER CORD INTO THE POWER JACK ON THE BACK OF THE LOUDSPEAKER. 002. CONNECT THE CORRECT POWER CORD TO THE WALL SOCKET. 001. 002. 001. 002. CAUTION: ALWAYS UNPLUG THE POWER CORD FROM THE WALL SOCKET BEFORE DISCONNECTING IT FROM THE LOADSPEAKER. NOTE: A POWER CORD WITH AN APPROPRIATE PLUG FOR YOUR REGION IS SUPPLIED 010. TURNING THE POWER ON/OFF 001. SWITCH THE POWER SWITCH TO ON TO TURN ON THE CAMDEN. 002. THE LED FOR THE LAST USED SOURCE WILL LIGHT UP. WHEN THE BATTERY IS CHARGING, THE BATTERY LED WILL FLASH. 003. TO TURN THE LOUDSPEAKER OFF, SWITCH OFF THE POWER SWITCH. 004. THE LED INDICATORS WILL TURN OFF. 001. 002. 002. 001. 004. 003. ADJUSTING THE SOUND TURN THE KNOB TO ADJUST THE:
001. VOLUME 002. BASS 003. TREBLE 001. 002. 003. 001. 002. 003. 012. CHARGING THE BATTERY THE CAMDEN IS EQUIPPED WITH A INTERNAL BATTERY SUPPORTING A PLAYING TIME FOR UP TO 20 HOURS AT MID VOLUME. THE BATTERY IS RECHARGEABLE AND CAN BE FULLY CHARGED IN 3 TO 4 HOURS, WHEN COMPLETELY DISCHARGED. IF THE BATTERY LED STARTS TO FLASH WHEN THE LOUDSPEAKER IS ON BATTERY POWER, THE BATTERY HAS LESS THAN 20% CHARGE LEFT. 001. PLUG IN THE LOUDSPEAKER TO MAINS POWER AND SET THE POWER SWITCH TO ON. 002. THE BATTERY LED STARTS FLASHING TO INDICATE THAT THE BATTERY IS CHARGING. 003. WHEN THE BATTERY LED CHANGES TO A FIXED LIGHT, THE CAMDEN IS FULLY CHARGED. 001. 002. NOTES:
THE POWER SWITCH HAS TO BE SWITCHED ON FOR THE THE DEVICE TO CHARGE. IF THE UNIT IS PLUGGED IN BUT TURNED OFF THEN THE UNIT WILL NOT CHARGE. THE LOUDSPEAKER CAN BE USED WHILE CHARGING BATTERY. USING THE CAMDEN WITH YOUR DEVICES THERE ARE TWO WAYS TO CONNECT YOUR PHONE, TABLET, LAPTOP TO YOUR LOUDSPEAKER, WHETHER USING A PHYSICAL CORD OR VIA WIRELESS BLUETOOTH. BELOW YOU WILL FIND MORE DETAILS ABOUT THE CONNECTION SOURCES, IN TWO CATEGORIES:
WIRELESS CONNECTION VIA BLUETOOTH CONNECTION VIA THE 3.5MM STEREO PLUG CAUTION: MAKE SURE THAT THE VOLUME IS SET TO LOW ON BOTH THE CAMDEN ACTIVE LOUDSPEAKER AND THE MUSIC PLAYER WHEN YOU START PLAYING MUSIC. 014. CHOOSING YOUR SOURCE 001. PUSH THE SOURCE/WAKE BUTTON TO CHOOSE YOUR SOURCE OR TO SWITCH BETWEEN CONNECTED SOURCES. 002. A LIT LED INDICATES WHICH SOURCE YOU HAVE SELECTED. ORDER OF CONNECTIONS (FROM TOP TO BOTTOM):
BLUETOOTH INPUT - 3.5MM STEREO PLUG 001. 002. 001. CONNECTING VIA BLUETOOTH WITH THE HELP OF BLUETOOTH TECHNOLOGY, BLUETOOTH-COMPATIBLE DEVICES CAN EASILY BE CONNECTED TO EACH OTHER OVER A SHORT WIRELESS CONNECTION. USE YOUR BLUETOOTH-ENABLED SMARTPHONE, TABLET OR COMPUTER TO STREAM MUSIC DIRECTLY TO YOUR CAMDEN. FOLLOW THESE STEPS TO CONNECT YOUR CAMDEN WIRELESSLY TO YOUR BLUETOOTH DEVICE. 001. TURN THE CAMDEN ACTIVE LOUDSPEAKER ON. 002. SELECT BLUETOOTH AS SOURCE BY PUSHING THE SOURCE/WAKE BUTTON UNTIL THE BLUETOOTH LED IS LIT. 003. ACTIVATE THE BLUETOOTH FUNCTIONALITY ON YOUR DEVICE
(SMARTPHONE, TABLET, COMPUTER). 004. PUSH THE PAIR BUTTON. THE LED ON THE CAMDEN WILL START TO FLASH RAPIDLY IN RED. 005. ON YOUR DEVICE, SELECT THE CAMDEN SPEAKER FROM YOUR LIST. THE LED ON THE SPEAKER WILL TURN TO A STEADY RED. 006. YOU ARE NOW READY TO PLAY YOUR MUSIC WIRELESSLY VIA THE LOUDSPEAKER. NOTES:
YOU ONLY NEED TO PAIR YOUR SMARTPHONE/TABLET/COMPUTER WITH THE CAMDEN ONCE, AFTER WHICH THE DEVICE WILL BE INCLUDED IN THE LIST OF YOUR BLUETOOTH DEVICES. WHEN PAIRING A NEW DEVICE, PUSH THE PAIR BUTTON AGAIN AND REPEAT STEPS ABOVE. UP TO SIX DEVICES CAN BE STORED IN THE LOUDSPEAKERS MEMORY. 016. CONNECTING VIA BLUETOOTH 002. 002. 004. 005. 004. 005. 003. 006. LOCATING YOUR DEVICES VIA BLUETOOTH SELECT BLUETOOTH AS THE INPUT SOURCE BY PUSHING THE SOURCE/
WAKE BUTTON. BLUETOOTH IS NOW ACTIVATED, WITH A FLASHING RED LED IF NO DEVICE IS CONNECTED, AND A SOLID RED LED IF A DEVICE IS CONNECTED. THE LOUDSPEAKER WILL NOW AUTOMATICALLY SEARCH FOR PAIRED DEVICES FOR THREE MINUTES, AND THE LED WILL RAPIDLY FLASH RED DURING THE SEARCH. THE CAMDEN WILL LOCATE DEVICES WITHIN RANGE THAT HAVE PREVIOUSLY BEEN CONNECTED AND WILL CONNECT THEM AUTOMATICALLY. IF NO DEVICES ARE LOCATED WITHIN THREE MINUTES, THE LOUDSPEAKER WILL REVERT TO STANDBY STATUS (THERE IS MORE INFORMATION ON THE STANDBY MODES ON PAGE 021). IF THE PAIR BUTTON IS PUSHED WHILE BLUETOOTH IS SELECTED AS THE AUDIO SOURCE, THE LOUDSPEAKER WILL PERFORM A NEW SEARCH FOR THREE MINUTES AFTERWARDS, DURING WHICH TIME, THE LED WILL RAPIDLY FLASH RED. NOTES:
THE AUTO CONNECTION FUNCTION WILL NOT WORK IF THE CAMDEN IS TURNED OFF VIA THE MAIN POWER SWITCH AT THE TOP OF THE UNIT IF A SEVENTH DEVICE IS CONNECTED, DEVICE A WILL NO LONGER BE MEMORISED. ALWAYS START BLUETOOTH IN YOUR SMARTPHONE/COMPUTER FIRST, AND THEN START THE LOUDSPEAKER TO RECEIVE AN AUTO CONNECTION. 018. BLUETOOTH AUTO CONNECTION IF A DEVICE IS MOVED OUTSIDE THE RANGE OF THE CAMDEN ACTIVE LOUDSPEAKER (APPROXIMATELY 10 METRES WITHOUT OBSTACLES), THAT DEVICE IS THEN DISCONNECTED. THE DEVICE IS AUTOMATICALLY CONNECTED AGAIN WHEN IT IS MOVED BACK WITHIN RANGE. THE CAMDEN STORES UP TO SIX DEVICES AND ALWAYS STARTS SEARCHING FOR THE LAST DEVICE THAT HAS BEEN CONNECTED. IF THE CAMDEN HAS BEEN CONNECTED TO DEVICES ABCDEF IN THAT ORDER, DEVICE F IS GIVEN FIRST PRIORITY, WHILE DEVICE A IS GIVEN LAST PRIORITY. EVERY TIME THE CAMDEN STARTS UP, IT WILL PERFORM AN AUTO CONNECTION OF DEVICES WITHIN ITS RANGE. CONNECTING SOURCES BY CABLE THERE IS ANOTHER WAY TO CONNECT TO YOUR CAMDEN THE OLD FASHIONED WAY, USING A CORD AND THE 3.5MM INPUT. INPUT - 3.5MM STEREO PLUG USE THE DOUBLE-ENDED COIL CORD WITH 3.5MM PLUGS TO CONNECT TO AUDIO SOURCES THAT HAVE AUDIO OUTPUT SUCH AS A MOBILE TELEPHONE, IPHONE/IPAD/IPOD, MP3 PLAYER, OR AIRPORT EXPRESS. 020. INPUT - 3.5MM STEREO PLUG 001. CONNECT THE CORD WITH THE 3.5MM STEREO PLUG TO THE INPUT ON THE LOUDSPEAKER. 002. CONNECT THE CORD WITH THE 3.5MM STEREO PLUG TO THE MUSIC PLAYER. 003. SELECT INPUT AS SOURCE BY PUSHING THE SOURCE/WAKE BUTTON UNTIL THE INPUT LED IS LIT (SEE PAGE 015). 001. 002. 002. 001. 003. 003. STANDBY MODES DEPENDING ON WHETHER THE CAMDEN IS RUNNING ON BATTERIES OR MAINS POWER IT USES TWO DIFFERENT STANDBY MODES. THIS IS IN ORDER TO COMPLY TO THE EUROPEAN UNION REGULATION THAT STATES THAT ELECTRONIC DEVICES MAY ONLY HAVE 0.5W POWER CONSUMPTION IN STANDBY MODE (THE EUROPEAN DIRECTIVE ON ENERGY RELATED PRODUCTS, OR ERP). THE CAMDEN ACTIVE STEREO LOUDSPEAKER WILL GO INTO STANDBY MODE AFTER 20 MINUTES OF NOT RECEIVING A SOUND SIGNAL OR AFTER THREE MINUTES OF NOT LOCATING ANY BLUETOOTH DEVICE WHEN IN PAIRING MODE. DEPENDING ON WHETHER THE CAMDEN IS RUNNING ON BATTERY POWER OR IS CONNECTED TO MAINS POWER, THE WAKE UP BEHAVIOUR DIFFERS. 022. WAKING UP - BATTERY POWER WHEN THE CAMDEN GOES INTO STANDBY MODE WHILE RUNNING ON BATTERY POWER, THE LOUDSPEAKER ENTERS A LOW-POWER STATE. IT WILL NOT AUTOMATICALLY WAKE UP WHEN YOU BEGIN PLAYING MUSIC AND IT WILL ALSO NOT SHOW UP AS AN AVAILABLE DEVICE IN YOUR BLUETOOTH CONNECTION LIST. 001. TO ACTIVATE THE CAMDEN AFTER THE UNIT HAS GONE TO STANDBY MODE, PUSH THE SOURCE/WAKE BUTTON ONCE. THIS WILL BRING THE CAMDEN BACK TO LIFE AND READY TO PLAY AGAIN. 001. 001. WAKING UP - MAINS POWER WHEN CONNECTED TO MAINS POWER, THE CAMDEN WILL AUTOMATICALLY WAKE UP WHEN THE LAST USED SOURCE IS PLAYED OR THE SOURCE/WAKE BUTTON IS PUSHED. 001. IF THE LAST SOURCE USED WAS THE 3.5MM STEREO PLUG INPUT, THE LOUDSPEAKER WAKES UP AUTOMATICALLY WHEN THE CONNECTED SOURCE BEGINS TO PLAY. 002. IF A BLUETOOTH DEVICE WAS USED AS THE LAST SOURCE, USING THE LAST USED BLUETOOTH DEVICE WILL WAKE THE CAMDEN UP. 001. 002. NOTE: IF YOU WANT TO PLAY ANOTHER BLUETOOTH DEVICE INSTEAD OF THE LAST ONE USED, PUSH THE SOURCE/
WAKE BUTTON ONCE TO FIND PAIRED DEVICES
(SEE PAGE 018). 024. REPLACING THE INTERNAL BATTERY IF THE INTERNAL BATTERY IS BROKEN OR WORN OUT, YOU CAN REPLACE IT WITH A NEW ONE. THE FAULTY BATTERY PACK MUST ALWAYS BE RECYCLED ACCORDING TO LOCAL REGULATIONS. 001. UNPLUG THE POWER CORD FROM THE WALL SOCKET. 002. DISCONNECTED THE POWER CORD FROM THE CAMDEN POWER JACK. 003. CAREFULLY PLACE THE CAMDEN UPSIDE DOWN ON A FLAT, CLEAN SURFACE. 004. USING A PHILLIPS SCREWDRIVER, UNSCREW THE TWO SCREWS ON THE BATTERY HATCH ON THE BOTTOM OF THE LOUDSPEAKER. 005. OPEN THE BATTERY HATCH AND REMOVE IT FROM THE LOUDSPEAKER. 002. CAUTION: RISK OF SHOCK OR DAMAGE!
REPLACING THE BATTERY IS A DELICATE AND TECHNICAL PROCEDURE. IF YOU ARE UNSURE, CONTACT A QUALIFIED SERVICE PROFESSIONAL. 004. 004. REPLACING THE INTERNAL BATTERY 006. CAREFULLY LIFT THE BATTERY PACK WITHOUT PULLING ON THE CABLE CONNECTING THE BATTY TO THE LOUDSPEAKER. 007. GENTLY PULL ON THE BATTERY PLUG, AWAY FROM THE LOUDSPEAKER TO DISCONNECT AND REMOVE THE BATTERY. 008. REVERSE THE PROCESS TO INSTALL THE NEW BATTERY. CAUSION:
DO NOT PULL ON THE BATTERY CABLE. 005. 006. 026. TECHNICAL INFORMATION ACTIVE STEREO LOUDSPEAKER WITH BASS REFLEX SYSTEM TONE CONTROLS:
BASS: 180HZ, +6DB TO -12DB TREBLE: 3KHZ, +6DB TO -12DB CLASS D AMPLIFIER: 2X5W+1X15W SOUND SPECIFICATION WOOFER: 1X 4 MAX SPL: 100DB SPL @ 1M (GROUND PLANE 300HZ, 1%THD) FREQUENCY RANGE: 62-20.000HZ CROSSOVER FREQUENCY: 4200HZ DOME TWEETER: 2X 3/4, FERROFLUID COOLED CONNECTIVITY BLUETOOTH: STANDARD V4.0 INPUT - 3.5MM: 1X ABSOLUTE MIN/MAX: 90-264VAC TECHNICAL INFORMATION MAINS INPUT VOLTAGE: 100-240VAC/70W MAINS FREQUENCY: 50-60HZ AUDIO MAX PEAK POWER CONSUMPTION: 70W TWO STANDBY MODES: POWERSAVER MODE (0,40W) AND STANDARD MODE (3,5W) BATTERY TYPE: 4X 3,7V LI-IO BATTERIES, 2200MAH BATTERY PLAYING TIME: UP TO 20H (50% VOLUME) MAX POWER OUTPUT: 30W RMS WEIGHT: 3.00KG SIZE: 242 X 140 X 140MM NOTE: THE FRONT FRET IS NOT REMOVEABLE. THIS ILLUSTRATION INTENDS TO SHOW THE INTERNAL SPEAKER LAYOUT. DO NOT ATTEMPT TO REMOVE THE FRONT FRET FOR RISK OF DAMAGING YOUR ACTIVE LOUDSPEAKER. CAMDEN PROBLEM CAUSE THE LOUDSPEAKER WILL NOT TURN ON. The internal battery is discharged or the power cord is not plugged into a working wall socket or not plugged into the power jack on the back of the loudspeaker. THE SOUND IS WEAK OR THERE IS NO SOUND AT ALL. The 3.5mm cord/input cable/signal cable is not correctly connected to either the loudspeaker or the music player. The volume level is too low on the loudspeaker. The volume level is too low on the music player. THE SOUND IS DISTORTED. The volume level is too high. The original sound file (mp3) is of poor quality. Excessive playback volume. Too much bass/treble boost. SHARP CRACKLING/
CLICKING ON STRONG PASSAGES/TRANSIENTS. Clipping when the amplifier runs out of power. ERRATIC PERFORMANCE. Interference from another source or electronic device. 028. TROUBLE SHOOTING ACTION Plug the power cord into a working wall socket and plug the connector into the power jack on the back of the loudspeaker to charge the battery. Unplug and re-plug the 3.5mm cord/input cable/signal cable into both the loudspeaker and the music player. Turn up the volume on the loudspeaker. Turn up the volume on the music player. Turn down the volume. Try another sound file (mp3) or music player. Turn down playback level on the volume knob or reduce the sound level on the music player. Turn down the volume control on the control panel and/or music player. Reduce the bass boost on the control panel or excessive bass boost/eq on the music player. Turn down the volume on the loudspeaker or on the music player. Reduce the bass boost. Move the loudspeaker to another spot or turn off or move other electronic devices. CAMDEN PROBLEM CAUSE BLUETOOTH WILL NOT CONNECT. The Camden is too far away from your device during the pairing process. THE SOUND QUALITY IS POOR WHEN CONNECTED THROUGH BLUETOOTH. The greater the distance between the Camden and the Bluetooth device, the poorer the sound quality will be. BLUETOOTH CONNECTION IS BROKEN OR DISRUPTED. THE CAMDEN LOUDSPEAKER CANNOT FIND A BLUETOOTH CONNECTION. The Bluetooth connection only works when it is near the device. The connection is automatically broken if the Bluetooth device moves outside of the area. The connection may even be affected due to obstacles such as walls or doors. The loudspeaker cannot search or connect correctly in the following cases:
There is a strong electric field surrounding the Camden. The Bluetooth device is turned off, not available or does not function as it should. Please note that items such as, for example, microwave ovens, wireless network adapters, fluorescent lights and gas cookers use the same frequency range as the Bluetooth device, which could lead to electrical disturbances. THE INTERNAL BATTERY IS NOT CHARGING The Camden is not connected to AC mains power and switched on. BATTERY IS NOT WORKING/BATTERY LIFE HAS DECLINED The internal battery is broken or worn out and needs to be replaced. 030. TROUBLE SHOOTING ACTION Place the Camden closer to the Bluetooth device during the pairing process. Move the Camden closer to the Bluetooth device. If the distance exceeds the Bluetooth devices wireless range, the connection will be lost. Ensure that the Camden is placed near the Bluetooth device, and unobstructed by obstacles such as walls or doors. Please ensure that there is no electrical interference surrounding the Camden, that your Bluetooth device is on and working properly. NOTES:
A BLUETOOTH DEVICE COULD CAUSE SOUND-RELATED OR TECHNICAL FAULTS, DEPENDING ON USE, IN THE FOLLOWING CASES:
- WHEN SOME PART OF THE BODY IS IN CONTACT WITH THE RECEIVING/TRANSMITTING SYSTEM FOR THE BLUETOOTH DEVICE OR THE CAMDEN ACTIVE LOUDSPEAKER.
- ELECTRICAL VARIATIONS DUE TO OBSTACLES IN THE FORM OF WALLS, CORNERS, ETC.
- EXPOSURE TO ELECTRICAL DISRUPTIONS FROM DEVICES WITHIN THE SAME THIS WIRELESS DEVICE MAY CAUSE ELECTRICAL DISRUPTIONS DURING USE. YOU DO NOT NEED TO ENTER THE PIN CODE (PASSWORD) WHEN CONNECTING THE BLUETOOTH DEVICE TO THE CAMDEN. IF THE WINDOW FOR ENTERING THE PIN CODE IS DISPLAYED, YOU SHOULD ENTER <0000>. YOU CANNOT CONNECT TO A BLUETOOTH DEVICE THAT ONLY SUPPORTS THE HF (HANDS FREE) AREA FUNCTION. FREQUENCY BAND, FOR EXAMPLE MEDICAL EQUIPMENT, MICROWAVE OVENS AND WIRELESS NETWORKS. Plug the power cord into a working wall socket and plug the connector into the power jack on the back of the loudspeaker and switch the power switch, to ON position. Replace the internal battery according to the instruction on page 025. 032. WARRANTY INFORMATION INDEX 258. ENGLISH 259. CZECH - CESKY 260. FRENCH - FRANAIS 261. JAPANESE -
262. GERMAN - DEUTSCH 263. SPANISH - ESPAOL 264. PORTUGUESE - PORTUGUS 265. ITALIAN - ITALIANO 266. SWEDISH - SVENSKA 267. DANISH - DANSK 268. DUTCH - NEDERLANDS 269. POLISH - POLSKI 270. SIMPLIFIED CHINESE -
271. TRAD. CHINESE -
NOTE: ONCE TRANSLATION IS DONE CHANGE PAGE NUMBERS TO MATCH WARRANTY ENGLISH ONE YEAR LIMITED MANUFACTURERS WARRANTY not limit the rights you may have under applicable statutory product warrantee provisions. You may have other rights based on local laws during or after the warranty period. These rights are not excluded or limited by this limited warranty. This limited warranty extends only to you and cannot be transferred or assigned. If any provision of this limited warranty is unlawful, void or unenforceable, that provision shall be deemed severable and shall not affect any remaining provisions. HOW IT WORKS: If you believe your product is defective within the warranty period, please bring the product back to where the product was initially purchased. Alternatively, or with any other questions or concerns, please call customer support at +46 (0) 8-41070510, or contact us via email at support@
marshallheadphones.com. Please note: Zound Industries does NOT accept any warranty claims made by products being shipped to our address. Please read the HOW IT WORKS section before making any warranty claims. Marshall Headphones C/O Zound Industries International AB Box 6063 10231 Stockholm, Sweden Designed in Stockholm Produced in China The content of this document information purposes only. Zound Industries reserves the right to change information without prior notifications and at any time. is for resulting Industries) disassembly, is dedicated Industries hereby warrants Industries LIMITED WARRANTY: Zound International AB (referred to subsequently as Zound to providing excellent products using todays advanced technology. However, electronic products may encounter technical difficulties resulting from a manufacturing defect. This is why Zound Industries offers the following, free, one (1) year limited warranty on this product to the holder of a valid proof of purchase of the product. Zound that, under normal use, this product will be free from defects in materials and workmanship for a period of one (1) year from the date of initial purchase. This limited warranty does not apply to from accident, abuse, defects misapplication, repair, unauthorized modification, improper operation or maintenance, or usage not in accordance with product instructions. Other than the limited warranty set forth above, Zound Industries (to the maximum law) expressly extent permissible by disclaims and excludes all warranties, expressed or implied, including, without limitation, of merchantability and fitness for a particular purpose, relating to the use or performance of the product. Some legislation do not allow the exclusion of implied warranties, so the above exclusion may not apply to you. Zound Industries shall not be liable for special, indirect, incidental or consequential damages resulting from the use or inability to use this product, regardless of the legal theory on which the claim is based. Some the exclusion legislations do not allow or incidental or indirect, consequential damages, so the above exclusion or limitation may not apply to you. This warranty gives you specific legal rights, and you may also have other rights which vary from legislation to legislation. This means that the limited warranty is distinct from any statutory rights under any mandatory consumer protection laws of your country applicable to you. It is intended to grant you specific, and as the case may be, additional rights, within the limits of what is permissible under such law, and does implied warranties limitation of the 034. WARRANTY CESKY JEDNOLET ZRUKA VROBCE i po ubhnut zruky mete mt i dal prva zaruen mstnm zkonem. Tato prva nejsou touto zrukou vylouena ani omezena. Tato omezen zruka plat pouze pro vs a nelze ji nijak penet i pedvat. Pokud se uke, e je nkter z jejch st nezkonn, povauje se tato st za oddlitelnou a nem vliv na jin sti. JAK TO FUNGUJE: Pokud se u produktu projev v zrun dob urit vada, prosm pineste jej na prodejnu, kde jste jej zakoupili. Ppadn se obracejte na centrum pe o zkaznky na sle
+46 (0) 8-41070510 nebo e-mailov adrese support@marshallheadphones.com. Upozornn: Zound Industries NEPIJM zrun nroky vznikl dopravou produktu na nai adresu. Ped vznesenm zrunho nrok si prosm projdte sekci JAK TO FUNGUJE. Marshall Headphones C/O Zound Industries International AB Box 6063 10231 Stockholm, Sweden Design vytvoen ve Stockholmu Vyrobeno v n Industries rozloen, nejmodernj OMEZEN ZRUKA: Zound Industries International AB (dle jen Zound Industries) se sna poskytovat vynikajc produkty vyuvajc technologie. U elektronickch produkt vak me dojt k technickm problmm nsledkem vrobnch defekt. Proto spolenost Zound Industries nabz u tohoto produktu po platnm prokzn nkupu nsledujc bezplatnou jednoletou omezenou zruku. Zound tmto zaruuje, e za obvyklho pouvn se u tohoto produktu po dobu jednoho (1) roku od data zakoupen nebo obdren (podle toho, co nastane pozdji) od prodejce Zound Industries neprojev dn vady materilu ani vroby. Tato omezen zruka se nevztahuje na pokozen zpsoben nehodou, nesprvnm pouvnm, neautorizovanmi opravami, modifikacemi, nesprvnm provozem nebo drbou, ppadn pouitm, kter neodpovd piloenm instrukcm. Krom ve uveden omezen zruky Zound Industries vslovn vyluuje jakkoli zruky, uveden i pedpokldan, vetn mimo jin pedpokldan zruky prodejnosti a vhodnosti pro dan el, kter se vztahuj k pouvn nebo vkonu produktu. V nkterch legislativch nen odmtnut pedpokldan zruky povoleno, take ve uveden odmtnut pro vs nemus platit. Zound Industries neodpovd za dn speciln, nepm, nhodn ani nsledn kody vznikl pouvnm (nebo nemonost pout) produktu, bez ohledu na prvn teorii, na kter by se takov nrok zakldal. V nkterch legislativch nen toto odmtnut i omezen nebo take ve nslednch kod povoleno, uveden odmtnut pro vs nemus platit. Tato zruka vm dv urit zkonn prva, dal mete zskat podle pro vs platn tato omezen zruka se me liit od zkonnch prv udlovanch zkonem na ochranu spotebitele zem, ve kter se nachzte. Jejm clem je udlit vm specifick, ppadn dal prva v me povolen danm zkonem a nijak neomezuje prva, kter vm ji zaruuj pslun lnky zkona upravujc produktov zruky. V prbhu legislativy. To znamen, e nepmch, nhodnch
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2015-05-16 | 2402 ~ 2480 | DXX - Part 15 Low Power Communication Device Transmitter | Original Equipment |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 | Effective |
2015-05-16
|
||||
1 | Applicant's complete, legal business name |
Zound Industries International AB
|
||||
1 | FCC Registration Number (FRN) |
0025221201
|
||||
1 | Physical Address |
Centralplan 15 SE-111 20 Stockholm Sweden
|
||||
1 |
Stockholm, N/A
|
|||||
1 |
Sweden
|
|||||
app s | TCB Information | |||||
1 | TCB Application Email Address |
s******@nemko.com
|
||||
1 | TCB Scope |
A2: Low Power Transmitters (except Spread Spectrum) and radar detectors operating above 1 GHz
|
||||
app s | FCC ID | |||||
1 | Grantee Code |
2AAGF
|
||||
1 | Equipment Product Code |
KILBURN
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 | Name |
E******** X****
|
||||
1 | Title |
Compliance Engineer
|
||||
1 | Telephone Number |
+8613********
|
||||
1 | Fax Number |
+8613********
|
||||
1 |
e******@zoundindustries.com
|
|||||
app s | Technical Contact | |||||
n/a | ||||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 | Equipment Class | DXX - Part 15 Low Power Communication Device Transmitter | ||||
1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | ACTIVE STEREO LOUDSPEAKER | ||||
1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 | Modular Equipment Type | Does not apply | ||||
1 | Purpose / Application is for | Original Equipment | ||||
1 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 | Firm Name |
Global United Technology Service Co., Ltd
|
||||
1 | Name |
R******** L********
|
||||
1 | Telephone Number |
86-75********
|
||||
1 | Fax Number |
86-75********
|
||||
1 |
r******@gtstest.com
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15C | 2402.00000000 | 2480.00000000 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC