CDMA2000 1X EV-DO Wireless Data Terminal User Guide CDMA2000 1X EV-DO Wireless Data Terminal User Guide This User Guide is used for Wireless Data Terminal of AC8710. ZTE Corporation http://www.zte.com.cn CDMA2000 1X EV-DO Wireless Data Terminal User Guide Copyright Statement Copyright 2009 by ZTE Corporation All rights reserved. No part of this publication may be excerpted, reproduced, translated or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without the prior written permission of ZTE Corporation. ZTE Corporation reserves the right to make modifications on print errors or update specifications in this manual without prior notice. ZTE Corporation http://www.zte.com.cn CDMA2000 1X EV-DO Wireless Data Terminal User Guide Table of Contents 4. Introduction.............................................................................................................................1 1. 2. Precautions..............................................................................................................................1 3. Appearance .............................................................................................................................2 3.1 Introduction.........................................................................................................................2 3.2 Insert R-UIM Card..............................................................................................................2 3.3 Operation Guide of Data Cable...........................................................................................3 Install and Uninstall................................................................................................................4 4.1 System Requirements..........................................................................................................4 4.2 Installation Guide...............................................................................................................4 4.2.1 Install........................................................................................................................4 4.2.2 Uninstall...................................................................................................................8 4.3 Manually Install Through Other USB Port .........................................................................8 4.3.1 Windows 2000..........................................................................................................8 5. Run the Application ................................................................................................................9 6. Connect/Disconnect..............................................................................................................11 7. Connection Records..............................................................................................................12 8. Voice Call.................................................................................................................................13 9. Call History .............................................................................................................................16 10. Short Message........................................................................................................................17 11. Phone Book............................................................................................................................19 12. Setting....................................................................................................................................20 13. Help .......................................................................................................................................23 14. Connect to the Website ..........................................................................................................23 15. Trouble-shooting....................................................................................................................23 16. FCC Regulations....................................................................................................................27 ZTE Corporation http://www.zte.com.cn CDMA2000 1X EV-DO Wireless Data Terminal User Guide 1. Introduction Thank you for choosing AC8710 CDMA2000 1X EV-DO Wireless Data Terminal (hereinafter referred to as Data Terminal) of ZTE Corporation. The Data Terminal equips with a standard USB interface and supports both CDMA2000 1X EV-DO and CDMA2000 1X network. In the area where there is signal, it allows you to go surfing on the Internet, send & receive short messages, and make & receive phone calls. The Data Terminal adopts two designing options: R-UIM and Built-in UIM, which make your operation more flexible. The pictures in this guide are only used to demonstrate your Data Terminals functions, so they are maybe different from what you see on your Data Terminal. Please refer to your Data Terminal if they are differences. 2. Precautions
Use the original accessories or those authenticated by the manufacturer. Using any unauthenticated accessories may affect the data terminals performance, violate the warranty provisions or relevant national regulations about telecom terminals, or even cause body injury.
Do not disassemble, modify, frequently pull/plug the antenna, stretch, rotate or bend the antenna with great force.
Before pulling out the data terminal, please use Windows safely removing the hardware and make sure to exit the application. Do not directly pull out the terminal to avoid the damage of data terminal or the influence on the normal operation of operating system.
Do not forcefully plug/pull the data terminal to avoid the damage of connector.
Do not use your data terminal near weak signal or high-precision electronic devices. Radio wave interference may cause misoperation of electronic devices or other problems.
Turn off your data terminal on airplane where its forbidden to use it. The data terminal may affect the normal operation of electronic devices, therefore please follow the relevant regulations when using your mobile phone on airplane.
Turn off your data terminal in hospital where its forbidden to use it. The data terminal may affect the normal operation of medical apparatus, therefore please follow the relevant regulations when using your mobile phone in hospital.
Please do not use the data terminal near flammable or explosive materials, otherwise it might cause failure or fire.
Keep your data terminal away from water. This may cause overheating or failure if water or any other kind of liquid enters your mobile phone. Please do not use your data terminal near high temperature, damp or dusty place.
Keep your data terminal away from children to avoid shock, plunge or impact. It may cause body injury when the data terminal is used as a toy. ZTE Corporation 1 http://www.zte.com.cn CDMA2000 1X EV-DO Wireless Data Terminal User Guide 3. Appearance 3.1 Introduction LED status descriptions:
LED Inserting the data terminal EV-DO OFF ON ON Yellow Green 3.2 Insert R-UIM Card Slow Flash Network Registered Service available or Searching for the network 1X Slow Flash EV-DO OFF 1X Quick Flash OFF Quick Flash OFF Upon an incoming call(as the terminal supports voice call) 1X EV-DO OFF Flash OFF Flash Note: If your data terminal doesnt need R-UIM card, please skip this section. 1. Pull out the tap 2. Take out the R-UIM card cover in the direction indicated by the arrow ZTE Corporation 2 http://www.zte.com.cn CDMA2000 1X EV-DO Wireless Data Terminal User Guide 3. Insert R-UIM card as below figure 4. Push back R-UIM card cover in the direction indicated by the arrow. 3.3 Operation Guide of Data Cable Generally, the Data Terminal could be directly connected with USB port. You could also connect the Data Terminal with PC by using the accompanying data cable, as shown in the following figure. Connect Interface with Data Terminal, and interface with PC's USB port. If the power supply from USB port is insufficient, connect both interface and with USB port together. ZTE Corporation 3 http://www.zte.com.cn CDMA2000 1X EV-DO Wireless Data Terminal User Guide 4. Install and Uninstall 4.1 System Requirements The Data Terminal supports the following operating system:
Windows 2000
Windows XP
Windows Vista PC minimum configurations:
CPU USB interface Optical Drive Memory Disk Space Pentium-II/233MHz 2.0 (USB1.0 and 1.1 compatible) CD-ROM (for installation only) 64 MB 50 MB (used for installation of application) 4.2 Installation Guide Take Windows XP for example. Under other operating systems, please refer to the installation under Windows XP. Do not insert the Data Terminal before installation. 4.2.1 Install 1. Find setup.exe firstly in the Data Terminal CD-ROM, double-click it to display the Welcome picture, and then click Next;
2. Select the location where you want the program to be installed, and then click Next;
ZTE Corporation 4 http://www.zte.com.cn CDMA2000 1X EV-DO Wireless Data Terminal User Guide 3. Select Start Menu folder, and then click Next;
4. When you see the window below, please click Install;
5. Please wait for installation;
ZTE Corporation 5 http://www.zte.com.cn CDMA2000 1X EV-DO Wireless Data Terminal User Guide 6. Please insert the Data Terminal into USB interface if the system prompts you to insert the hardware; (If it has been inserted, please unplug it and insert again.) 7. The system shall find the new hardware and install the driver automatically. Just wait a minute;
ZTE Corporation 6 http://www.zte.com.cn CDMA2000 1X EV-DO Wireless Data Terminal User Guide 8. The driver is installed successfully. Pleas click OK;
9. Click Finish to close the last screen of the wizard. Now you can start the application for data terminal. ZTE Corporation 7 http://www.zte.com.cn CDMA2000 1X EV-DO Wireless Data Terminal User Guide 4.2.2 Uninstall 1. Select Start -> All Programs -> ZTE Wireless Terminal -> Uninstall ZTE Wireless Terminal. Click Uninstall ZTE Wireless Terminal, and you will be asked if you want to remove the program. Click Yes. 2. Please wait. 3. Click OK when un-installation is completed. 4.3 Manually Install Through Other USB Port If the data terminal doesn't work through other USB ports after the driver is installed successfully through a USB port, you could manually install the driver in the following method. Please make sure to quit other applications during the installation. 4.3.1 Windows 2000 Insert the data terminal to another port, and the system will find new hardware and automatically install the driver. When the following prompt appears, click Yes. Now you can start the ZTE Corporation 8 http://www.zte.com.cn CDMA2000 1X EV-DO Wireless Data Terminal User Guide application for data terminal. 5. Run the Application After the application is installed successfully, the application icon will appear on your desktop. Double-click this icon or select from Start -> Programs ->ZTE Wireless Terminal ->
ZTE Wireless Terminal. Run the application to display the following user interface. Press to display other icons. The icons on the interface are used to access the function, which indicate as below:
Connect / Disconnect Open URL Voice Call Call History ZTE Corporation 9 http://www.zte.com.cn CDMA2000 1X EV-DO Wireless Data Terminal User Guide Short Message Phone Book Connection Record Setting Help Status Bar:
Note:
EV-DO indication 1X indication 1X/DO indication Signal strength indication. The more bars the stronger signals are. there are, CDMA network unavailable Connection indication Sleep indication Call indication Missed call indication Unread message indication Inbox full indication No R-UIM card inserted indication R-UIM card inserted indication Roaming indication Some features like Voice Call, Call History, Short Message, and Phone Book may not be supported by your Data Terminal; the corresponding icons will not appear in the main window. ZTE Corporation 10 http://www.zte.com.cn CDMA2000 1X EV-DO Wireless Data Terminal User Guide 6. Connect/Disconnect Connect
Click icon to set the relevant parameters. For details, please refer to Chapter 12 Setting for details.
Click icon at the left-up corner of the interface.
After connecting to Internet, the current network information will appear on the interface. Double-click any place in the display area to view the connection drawing.
Please connect the Data Terminal and PC with USB extension cable under weak signal to obtain the optimal performance. If necessary, adjust the Data Terminal's position and the antenna's direction. Disconnect After connecting to Internet, click the rotating icon at the left-up corner of the interface. ZTE Corporation 11 http://www.zte.com.cn CDMA2000 1X EV-DO Wireless Data Terminal User Guide 7. Connection Records Click icon to view connection records. Connection records save the previous relevant information including Start at, Duration and Transmit bytes, which will help you know the status easily. By switching among List, Monthly and Statistic, you could inquire the records every time, by month or by time. Note:
The relevant information contained in connection records are just for users reference rather than the charging basis. Delete Connection Records Click button to delete the records you have selected on the interface. Clear Connection Records button to delete all the records. Click Note: If your data terminal doesnt support Voice Call, Call History, Short Message, and Phone Book features, please skip 8-11 sections. ZTE Corporation 12 http://www.zte.com.cn CDMA2000 1X EV-DO Wireless Data Terminal User Guide 8. Voice Call Click to enter voice call interface. Make a call
Click the digits in the right side of the interface, or input the digits directly from keyboard. Press button or press Backspace to delete the previous input digit;
press button or press Esc to clear all the inputs.
Click button in the right side of the interface or press Enter to make a call. Receive a call
When there is an incoming call, your computer will alert and the incoming caller ID will appear on the interface.
Click button in the right side of the interface or press Enter to receive the call.
Press button or press Esc to reject the call. Redial the latest outgoing call
Click button in the right side of the interface. Call Waiting During a call, you could select to answer the second incoming call, and then you could switch ZTE Corporation 13 http://www.zte.com.cn CDMA2000 1X EV-DO Wireless Data Terminal User Guide between the two incoming calls. Please firstly apply for this service from your local telecom operator.
During a call, if there is a new incoming call, a pop-up window will prompt you that you have the second incoming call.
If you select to answer, please click Accept waiting call button. The previous call wont be ended, but temporarily paused.
You could switch between two incoming calls by clicking Switch call. ZTE Corporation 14 http://www.zte.com.cn CDMA2000 1X EV-DO Wireless Data Terminal User Guide Three-way Call This function allows for the call among three parties. Please firstly apply for this service from your local telecom operator. Note:
You need set Show 3 way call button during calling. Please perform the setting according to chapter 12.
You could click Dial second call button during a call, input the third-party number in the pop-up window, and then press OK button to call the third party. In this case, the original call wont be ended, but temporarily paused.
If the third party answers the call, click Start conference to enter the conference call. ZTE Corporation 15 http://www.zte.com.cn CDMA2000 1X EV-DO Wireless Data Terminal User Guide
During three-way conference call, click Hangup second call button to end the conference call, and return to the original call. 9. Call History icon to view the call history. The outgoing/incoming calls are saved in call history, Click including missed calls; incoming calls, outgoing calls, and talk duration. You could select the type you want to view. Missed/Accepted/Called Calls
Click button to delete your selected record.
Click ZTE Corporation button to delete all records in Missed/Incoming/Outgoing catalog. 16 http://www.zte.com.cn CDMA2000 1X EV-DO Wireless Data Terminal User Guide
Click button to dial the number.
Click button to send a short message to this number.
Click button to save this number to the phone book. Statistic
Click button to clear the talk duration. 10. Short Message Click icon to enter Short message interface. Send a Message
Input the text to sendor click button to select the preset message to send. Input the recipients number or click book. button to select the recipient from phone
Add more recipients if you like.
Select priority.
Click
Click button to send a message. button to save the text into outbox. ZTE Corporation 17 http://www.zte.com.cn CDMA2000 1X EV-DO Wireless Data Terminal User Guide The received messages will be saved in the Data Terminal In-box. After the Data Terminal In-box is full, the system will automatically move the messages in the Data Terminal In-box to the PC In-box, and clean out the Data Terminal In-box. You could copy the messages from the Data Terminal In-box to PC In-box by selecting Copy or Copy All; you could also copy the messages from PC In-box to the Data Terminal In-box by selecting Copy. The sent messages and unsent but saved messages will be all saved in the Out-box. Take Data Terminal In-box as an example:
Reply
Click to reply to the sender. Forward
Click to forward this message to other recipients. Dial Senders Number
Click to dial the senders phone number. Save Senders Number
Click to save the senders number into phone book. Delete
Click to delete your selected records. Clear
Click to delete all the records in the inbox. Copy
Click to copy your selected record into PC. Copy All
Click ZTE Corporation to copy all the records from the data terminal to PC. 18 http://www.zte.com.cn CDMA2000 1X EV-DO Wireless Data Terminal User Guide 11. Phone Book Click to view the Phone book. You could select to save the contacts either in the PC(computer)Normaldata terminalR-UIM CardIf your data terminal needs R-UIM card or in the Emergent. Click the pull-down menu to select the storage location. Add
Click then input the contents and select OK to add a new contact. Modify
Click then modify the contents and select OK to modify the contact information. Dial from the phone book
Click to dial your selected phone number. Send messages from the phone book
Click to compose the text. You could send the message to multiple recipients. Search for contacts
Click to search for the contacts by name or number. Delete
Click to delete your selected contact. ZTE Corporation 19 http://www.zte.com.cn Delete All CDMA2000 1X EV-DO Wireless Data Terminal User Guide
Click to delete all the contacts. Copy
Click to copy your selected contacts to other storage location. Copy All
Click to copy all contacts to other storage location. 12. Setting Click to enter the setting interface. Network Connection Setting
Set up the relevant parameters, work mode on the Network interface.
After the setting, click Apply button to save the settings on the current interface.
Click Default button and then Apply button to restore the settings on the current interface to factory default. Note:
The default network setup parameters are as below. Different regions may have different network setup parameters, so please consult your local telecom operator. Phone: #777 User: card Password: card ZTE Corporation 20 http://www.zte.com.cn CDMA2000 1X EV-DO Wireless Data Terminal User Guide Other Setting:
Click Options to switch the interface, and you could set URL and select the skin, language, etc. If you want to use conference call, please select Show 3 way call button during calling;
After the setting, click Apply button to save the settings on the current interface.
Click Change Password button to set lock device. The password is required when you start the application. The setting has nothing to do with "Default" button.
If your data terminal needs R-UIM card, please click the button Enable Pin. PIN code is needed when the application is started. The setting has nothing to do with "Default"
button.
Click Default button and then Apply button to restore the settings on the current interface to factory default. ZTE Corporation 21 http://www.zte.com.cn Select ring tone CDMA2000 1X EV-DO Wireless Data Terminal User Guide
After clicking Ring, you could set different ring tones for Call coming, New message, Call connected, Call disconnected and Waiting call.
After the setting, click Apply button to save the settings on the current interface.
Click Default button and then Apply button to restore the settings on the current interface to factory default. Supplementary Services
After clicking Service, you could set Unconditional forwarding, Busy Forwarding, No answer forwarding, Call waiting, etc. Double-click the selected option to modify the service number and forwarding number.
After the setting, click button to send the corresponding request to the network system.
After the setting, click Apply button to save the settings on the current interface.
Click Default button and then Apply button to restore the settings on the current interface to factory default. ZTE Corporation 22 http://www.zte.com.cn 13. Help CDMA2000 1X EV-DO Wireless Data Terminal User Guide Click button to view the help file.
Click Help button to view the relevant help file; click Online service to enter our companys website.
You could view the software version information under About. 14. Connect to the Website button to directly connect the website you set. For details on the website setting, Click please refer to Chapter 12 Setting. 15. Trouble-shooting After the installation, go to device manager and find ZTE USB Modem FFFF under Modem and ZTE Service Port FFFF, ZTE Voice Port FFFF under Port. If they are not found, please remove the software and reinstall. ZTE Corporation 23 http://www.zte.com.cn CDMA2000 1X EV-DO Wireless Data Terminal User Guide Common Failures Table:
Failures Causes Solutions download program Please WWW.ZTEMT.COM and reinstall it. the on our website Error occurs during the program installation. Open port failed. No R-UIM card. port The setup file may be damaged. Directly the run software before the Data Terminal is plugged in. is The occupied by other such applications, as Hyper terminal, or the software is already run. R-UIM card is not inserted. R-UIM card is not inserted properly. Sometimes the front side and back side are confused. R-UIM is damaged. Validate by using a CDMA terminal. card No signal indicated. ZTE Corporation Antenna is not Close the software, plug in the Data Terminal and run it again. Close relevant software and run the software again. Insert R-UIM card. Please refer to User Guide. Properly insert R-UIM card. Replace R-UIM card. Insert the antenna into the Data Terminal. 24 http://www.zte.com.cn CDMA2000 1X EV-DO Wireless Data Terminal User Guide Make sure it is in the CDMA network service area. Correct the parameter settings. Consult your service provider for details. to or the User, Reconnect. Try again later. Replace relevant damaged parts. connected Access Box. Out of the network service area. The antenna or RF component is damaged. Wrong setting of parameters.
(Phone, Password.) Not enough money. Consult your service provider for details. Network congestion failure. The Data Terminal is being connected.
(It usually occurs when the Internet connection is immediately made after is dialed.) Poor signal. The program has already been installed in current system. Autorun function in CD-ROM is disabled because of installation of anti-virus software in the system, or Windows Vista system itself disabled Autorun function in CD-ROM in default. the call network View signal strength indication and check if the antenna is properly inserted. Firstly remove the original program and insert the terminal again. Open My Computer to enter CD-ROM disk ordinal, and double-click Setup.exe to install manually. Dialing failed. Internet failure. connection The installation program cant auto set up. (If the Data Terminal supports auto setup function.) in CD-ROM No ordinal Computer. ZTE Corporation disk My will CD-ROM automatically disappear once the This is normal. If you want to display CD-ROM disk ordinal, you could firstly remove the program and then insert the http://www.zte.com.cn terminal again. 25 CDMA2000 1X EV-DO Wireless Data Terminal User Guide program is installed successfully. The program is not yet installed, and no other previous was version installed the system. in Please restart your computer. Please contact your local operator or product technical support center if CD-ROM disk ordinal doesn't appear after your computer is restarted. if The driver might be unable to work and the application is unable to run normally the terminal is pulled out and plugged in again when the application is being under Win2000 used operating system
(SP4).In this case, the device in device manager will be marked with exclamation yellow mark, and the system must be restarted to run normally. operating The system needs installing Update Roll 1 patch for Win2K SP4. Please download the patch from the following web site and install it. http://www.microsoft.com/downloads/details.aspx?familyid=
B54730CF-8850-4531-B52B-BF28B324C662&displaylang=
en ZTE Corporation 26 http://www.zte.com.cn CDMA2000 1X EV-DO Wireless Data Terminal User Guide 16. FCC Regulations
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This device has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiated radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help. Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. 4RF Exposure Information (SAR) This device meets the governments requirements for exposure to radio waves. This phone is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government. The exposure standard for wireless device employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6W/kg. *Tests for SAR are conducted using standard operating positions accepted by the FCC with the device transmitting at its highest certified power level in all tested frequency bands. Although the SAR is determined at the highest certified power level, the actual SAR level of the phone while operating can be well below the maximum value. This is because the device is designed to operate at multiple power levels so as to use only the poser required to reach the network. In general, the closer you are to a wireless base station antenna, the lower the power output. The highest SAR value for the device as reported to the FCC when tested for body, as described in this user guide, is 0.922 W/kg for CDMA 850 band. While there may be differences between the SAR levels of various phones and at various positions, they all meet the government requirement. ZTE Corporation http://www.zte.com.cn 27 CDMA2000 1X EV-DO Wireless Data Terminal User Guide The FCC has granted an Equipment Authorization for this device with all reported SAR levels evaluated as in compliance with the FCC RF exposure guidelines. SAR information on this device is on file with the FCC and can be found under the Display Grant section of http://www.fcc.gov/oet/fccid after searching on FCC ID: Q78-AC8710. For body operation, this device has been tested and meets the FCC RF exposure guidelines for use the positions the device a minimum of 0.5cm from the body. Use of other enhancements may not ensure compliance with FCC RF exposure guidelines. ZTE Corporation 28 http://www.zte.com.cn