FCC ID: Q78-X100 CDMA2000 1X Digital Mobile Phone

X100 User Manual V 1.0 X100 cdma2000 1X Digital Mobile Phone User Manual 1 http://www.zte.com.cn X100 User Manual V 1.0 Copyright 2005 by ZTE Corporation All rights reserved. No part of this publication may be excerpted, reproduced, translated or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without the prior written permission of ZTE Corporation. Edition: 1st edition, Feb., 2005 2 http://www.zte.com.cn X100 User Manual V 1.0 Contents 1 General Information...............................................................................................................................6 1.1 Welcome..............................................................................................................................................6 1.2 Security ...............................................................................................................................................6 1.3 Safety Warnings..................................................................................................................................6 2 Getting Started........................................................................................................................................7 2.1 Charging the battery ..........................................................................................................................7 2.1.1 Recharging the battery .................................................................................................................8 2.1.2 Caring for the battery ...................................................................................................................8 2.1.3 Common causes of battery drain .................................................................................................8 2.2 Powering on/off the Mobile Phone ....................................................................................................8 2.3 Getting to know your phone ...............................................................................................................9 2.3.1 General introduction.....................................................................................................................9 2.3.2 Performing basic functions ..........................................................................................................9 2.3.3 Understanding screen icons .......................................................................................................10 2.4 Using the menus ...............................................................................................................................10 3 Making and Receiving Calls................................................................................................................12 3.1 Making Calls.....................................................................................................................................12 3.1.1 Making a call..............................................................................................................................12 3.1.2 Dialing extension numbers ........................................................................................................12 3.1.3 Making IDD ...............................................................................................................................12 3.1.4 Redialing a number ....................................................................................................................12 3.1.5 Calling a saved number..............................................................................................................12 3.2 Answering a call............................................................................................................................12 3.2.1 Setting any key to answer calls..................................................................................................13 3.2.2 Muting an incoming call ............................................................................................................13 3.2.3 Mute during a call ......................................................................................................................13 3.2.4 Adjusting the volume during a call............................................................................................13 3.3 Dealing with missed calls.................................................................................................................13 3.4 Setting speed dialing ........................................................................................................................13 3.5 Calling emergency numbers.............................................................................................................13 4 Using Call Log List ...............................................................................................................................14 4.1 Calling a number listed in the call log.............................................................................................14 4.2 Sending a message to the number listed in the call log...................................................................14 4.3 Viewing details of a call ...................................................................................................................14 4.4 Adding a number to the contacts list................................................................................................14 4.5 Accessing the classified lists ............................................................................................................14 4.6 Erasing a call record from the call log............................................................................................14 4.7 Erasing all records...........................................................................................................................15 3 http://www.zte.com.cn X100 User Manual V 1.0 5 Entering Letters, Numbers, and Symbols..........................................................................................15 5.1 Understanding the text entry modes.................................................................................................15 5.2 Entering words letter by letter (Multitap mode)..............................................................................16 5.3 Entering words quickly.....................................................................................................................16 5.4 Entering symbols ..............................................................................................................................16 5.5 Entering numbers .............................................................................................................................16 5.6 Changing input modes......................................................................................................................16 6 Sending and Receiving Text Messages ...............................................................................................17 6.1 Sending text messages ......................................................................................................................17 6.1.1 Sending a new text message ......................................................................................................17 6.1.2 Sending a message to more than one recipients ........................................................................17 6.1.3 Sending a pre-written message ..................................................................................................18 6.1.4 Sending a saved message...........................................................................................................18 6.1.5 Failing to send a message ..........................................................................................................18 6.1.6 Receiving incoming calls while creating messages ..................................................................18 6.1.7 Viewing the Sent box.................................................................................................................18 6.1.8 Viewing the Inbox......................................................................................................................18 6.1.9 Marking the priority...................................................................................................................19 6.1.10 Using canned messages............................................................................................................19 6.2 Receiving text messages ...................................................................................................................19 6.3 Erasing messages .............................................................................................................................19 6.3.1 Erasing a single message............................................................................................................19 6.3.2 Auto Erase Inbox........................................................................................................................19 6.4 Setting a different call back number ................................................................................................20 6.5 Setting the Delivery confirmation ....................................................................................................20 6.6 Setting the Duplicate detection ........................................................................................................20 7 Storage of Contacts...............................................................................................................................20 7.1 Saving a new contact........................................................................................................................20 7.2 Adding pauses to a phone number ...................................................................................................21 7.3 Viewing the information of the contacts ..........................................................................................21 7.4 Editing a contact name.....................................................................................................................21 7.5 Editing a phone number ...................................................................................................................21 7.6 Setup a default number of the contact..............................................................................................21 7.7 Erasing a contact..............................................................................................................................22 7.8 Erasing a number .............................................................................................................................22 7.9 Assigning a Ring Tone......................................................................................................................22 7.10 Setting speed dialing ......................................................................................................................22 8 Calculator ..............................................................................................................................................23 9 Customizing your Phone......................................................................................................................24 9.1 Sound ................................................................................................................................................24 9.1.1 Select a different ring tone.........................................................................................................24 4 http://www.zte.com.cn X100 User Manual V 1.0 9.1.2 Setting sound effects ..................................................................................................................24 9.1.3 Setting the master volume..........................................................................................................24 9.1.4 Adjusting other volume..............................................................................................................25 9.2 Display..............................................................................................................................................25 9.2.1 Changing the display contrast....................................................................................................25 9.2.2 Adjusting the backlighting.........................................................................................................25 9.2.3 Setting the application time .......................................................................................................25 9.2.4 Choosing a different language ...................................................................................................26 9.2.5 Setting the name order ...............................................................................................................26 9.2.6 Choosing a different date format ...............................................................................................26 9.2.7 Setting the separator of date.......................................................................................................26 9.2.8 Choosing a different time format...............................................................................................26 9.2.9 Setting personal banner..............................................................................................................26 9.3 Shortcuts ...........................................................................................................................................26 9.4 Roaming............................................................................................................................................27 9.5 Phone Features.................................................................................................................................27 9.5.1 Clear personalized dictionary ....................................................................................................27 9.5.2 Changing the default text entry..................................................................................................27 9.5.3 Changing the default text language ...........................................................................................27 9.5.4 Setting any key to answer calls..................................................................................................27 9.5.5 Setting keyguard.........................................................................................................................27 9.5.6 Displaying and resetting the call timer ......................................................................................28 9.5.7 Changing touchtone length ........................................................................................................28 9.5.8 Setting service tone ....................................................................................................................28 9.6 Security .............................................................................................................................................28 9.6.1 Setting voice privacy..................................................................................................................28 9.6.2 Resetting the phone....................................................................................................................28 9.7 About.................................................................................................................................................28 10 Brew......................................................................................................................................................29 11 Vmail ....................................................................................................................................................29 12 Clock.....................................................................................................................................................29 12.1 Setting an alarm .............................................................................................................................29 12.2 Using Timer ....................................................................................................................................30 12.3 Setting a Countdown ......................................................................................................................30 13 Poker ....................................................................................................................................................31 14 Troubleshooting ..................................................................................................................................32 15 FCC Statement....................................................................................................................................33 5 http://www.zte.com.cn X100 User Manual V 1.0 1 General Information 1.1 Welcome Thank you for using ZTE X100 cdma2000 1X Digital Mobile Phone. To guarantee the mobile phone always in its best condition, please read this manual carefully and keep it for further use. The X100 enables you to freely communicate with people at any time and anywhere. It features intelligent personal information management, BREW functions, etc. which provides a vivid and dramatic mobile experience to you. X100 phone system has covered the cdma2000 1X technical specifications. ZTE Corporation reserves the right to modify the technical specifications in this manual at any time without notice. 1.2 Security

If your mobile phone is lost or stolen, please report to your service provider or proxy agencies (You need to provide the phones ESN number labeled on the back of the mobile phone. You can see the ESN number after removing the battery. Please keep the ESN number for future use.)

To protect your mobile phone from illegal use, please take the security measures as follows:

Set handset lock.

Take it with you as you can. 1.3 Safety Warnings To the owner

Some electronic devices are susceptible to electromagnetic interference sent by mobile phone if inadequately shielded, such as electronic system of vehicles. Please consult the device manufacturer before using the phone if necessary.

The operation of mobile phones may interfere with medical devices like hearing aids and pacemakers. Please always keep the mobile phone more than 20 centimeters away from such medical devices when the phone is turned on. Do not carry the mobile phone in the breast pocket. Turn the mobile phone off if necessary. Consult a physician or the manufacturer of the medical device before using the phone.

Be aware of the usage limitation when using a mobile phone at those places where there are explosive gases or explosive products being processed, such as oil warehouses or chemical factories, because even if your phone is in standby mode, it can still transmit radio frequency (RF) energy. Therefore, turn off your phone if required.

Pay attention to the traffic safety. Do not use your mobile phone while driving. Park before making or answering a call.

Store the phone out of the reach of small children. The phone may cause injury if used as a toy. Mobile phone

Please use the original accessories or those that are authenticated by ZTE. Using any unauthenticated accessories may affect your mobile phones performance, hurt your phone or even cause danger to your body and violate related national regulations about telecom terminals.

If you want to clean your phone, please use clean fabric that is a bit wet or static-free. Do not use harsh chemical http://www.zte.com.cn 6 X100 User Manual V 1.0 cleaning solvents or strong detergents to clean it. Turn off your phone before you clean it.

As your mobile phone can transmit electromagnetic waves, do not place it near magnetic items such as computer disks.

Using the phone near electrical appliances, such as TV, telephone, radio and personal computer can cause interference, which affects the function of the phone.

Do not expose your mobile phone to direct sunlight or store it in hot areas. High temperatures can shorten the life of electronic devices.

Prevent liquid from leaking into your phone.

Do not drop, knock or harshly treat it. Rough handling will break internal circuit boards.

Do not connect the phone with other unauthorized peripheral equipments.

Do not attempt to disassemble the mobile phone or battery by yourself. Non-expert handling of the devices may cause damages.

Do not charge the mobile phone without battery. Battery use

Do not short-circuit the battery, as this can cause excessive heat to bring about fire.

Do not store the battery in hot areas or dispose of it in a fire.

The battery can be recharged for hundreds of times, but it will eventually wear out. When the operating time (talk time and standby time) is noticeably shorter than normal, it is time to buy a new one.

Never use any charger or battery damaged or worn out.

Return the worn-out battery to the provider or put it in the appointed recycle place. Do not put it in familial rubbish. Warning: If the battery is broken, keep away from the content. If it taints your skin, wash your skin with abundance fresh water and ask for help from the doctor if necessary. Safety and general use in vehicles

Before making or answering a call, you should pay attention to the local laws about the use of wireless mobile phones and take them into account for practical use.

Safety airbag, brake, speed control system and oil eject system shouldnt be affected by wireless transmitting. If you do meet problems above, please contact your automobile provider.

Please turn off your mobile phone when refueling your automobile, and the same to the place where duplex wireless equipments are banned. Dont put your phone together with flammable or explosive items; inner spark may cause fire. Aircraft safety Please turn off your mobile phone before the airplane takes off. In order to protect airplanes communication system from interference, it is never allowed to use mobile phone when it is in flight. Using mobile phone before the plane taking off should get aircrews permission according to safety regulations. 2 Getting Started 2.1 Charging the battery Fully charge the new battery for approximately 12 hours when using the phone for the first three times. 7 http://www.zte.com.cn X100 User Manual V 1.0 To charge the battery, plug the charger into the socket located at the bottom left of the phone, then connect the adapters plug to a wall outlet. The battery icon at the top-right corner of the phone screen may tell you following possible status of the phone:

Charging (animated icon) Partially charged Full battery Low battery will automatically power off. During the charge, your phone and your charger may reasonably become hot, which is normal. while the icon blinks and the phone beeps. When the battery power is used up, the phone when the battery is fully charged, the sound will be played. Please disconnect the charger Finish charging from the phone and the outlet when charging finished. 2.1.1 Recharging the battery You can safely recharge the battery at any time, The procedure is the same as the above. 2.1.2 Caring for the battery This section gives you some important safety information and tips about how to improve the batterys performance. General safety guidelines This phone contains an integrated Li-Ion battery. Do not attempt to disassemble, puncture, or short-circuit the battery. If the battery has been put out of use for more than a month, recharge it before using your phone. Avoid using the phone under extreme temperatures, direct sunlight, or high humidity. Never dispose of used batteries in or near a fire. It could lead to explosion. Check with your local regulations for proper disposal instructions. 2.1.3 Common causes of battery drain The following operations drain the battery more quickly and thereby adversely affect its talk and standby times:

Playing games frequently. Frequent use of the backlights. Operating when no service is available, or service is available intermittently. High earpiece and ringer volume settings. Unacknowledged voicemail and text message alerts. 2.2 Powering on/off the Mobile Phone Hold the This picture will be different according to different service provider. key, until the power-on/power-off picture appears. 8 http://www.zte.com.cn X100 User Manual V 1.0 2.3 Getting to know your phone 2.3.1 General introduction 1 2 4 6 8 9 10 11 12 3 5 7 13 14

(1) Home screen.

(2) Left soft key: Using as shortcut / corresponding to the function displayed at the left-bottom of the screen.

(3) Right soft key: Using as shortcut / corresponding to the function displayed at the right-bottom of the screen.

(4) Navigation key: (four directions) Scrolls through lists and moves the cursor during text entry. Also adjust the ringer volume.

(5) OK key: Access menu or select an option from the list. Also switch between different modes during the text entry.

(6) Send/Talk key: Dials a number or answers a call.

(7) End/Power key: Turns the phone on or off, ends a call, or returns to the home screen.

(8) Back key: Erases the last input in the text entry mode, returns to the previous menu, or erases all characters during text entry by holding the key.

(9) 1 symbol key: Switches between symbol and other entry method during the text entry.

(10) Keypad: For entering numbers, letters, or symbols.

(11) Jack: For hands-free headset (sold separately).

(12) * Text key: Switches between upper and lower case during the text entry.

(13) # Space key: Inserts a space during the text entry.

(14) Jack: For AC adapter (included). Warning: Inserting an accessory into the incorrect jack may damage the phone. 2.3.2 Performing basic functions To... Turn on the phone Turn off the phone Make a call End a call Answer a call From the home screen... Hold for approximately 3 seconds. for approximately 3 seconds. Hold Enter the number by using the alphanumeric keypad and then press Press Press

. 9 http://www.zte.com.cn X100 User Manual V 1.0 Set the master volume Lock the keypad Unlock the keypad Access the Contacts list Access Messages Access recent Calls list Access Menu Hold Hold Press Press Press Press Press for 3 second. for 1 second. then left soft key (defined as Contacts shortcut). right soft key (defined as Messages shortcut). send key (defined as Call Log shortcut). OK key. 2.3.3 Understanding screen icons These icons may appear on your phones screen. The alarm is set. Battery power indicator. More black bars indicates more battery power available. Service available. You can make and receive calls. More bars indicates stronger signal. No service available. Call in progress. Voice privacy set. A new text message received. One or more voicemails received. Roaming status indication. Vibration function on. Ringer off. 2.4 Using the menus The contents of the main menu are as follows:

Call Log

(options) Show details Send message Delete Show call type Clear list Brew MobileShop Settings Help Msging Compose Inbox Sent Draft Pages Settings Vmail To operate in the menus:

Press OK key to access Menu. Contacts

(options) Add Edit Delete Clock Alarm Clock Timer Countdown Calc Settings Poker Sound Display Shortcuts Roaming Features Security About 10 http://www.zte.com.cn X100 User Manual V 1.0 Press Press Press OK key to select a menu item. left , right , up or down to view menu items. to return to the previous menu page. to return to the home screen. Press In this guide, the arrow guides you to the next step of an operation. For example, select Menu Settings means to press OK key to access Menu, and then select the Settings option. 11 http://www.zte.com.cn X100 User Manual V 1.0 3 Making and Receiving Calls 3.1 Making Calls 3.1.1 Making a call 1. Make sure you are in an area where the network service is available. Note the More bars indicates stronger signal. If no bar appears, try to move the phone to where the signal can be detected. In some cases, it can be as simple as changing the direction you are facing. 2. Enter the phone number. icon on the home screen. to dial the number. to end the call. 3. Press 4. Press 3.1.2 Dialing extension numbers Method1: Dial the exchange number and then the extension number. Method2: Add pauses (after entering the exchange number, press Options right soft key Insert pause) between the exchange number and the extension numbers. 3.1.3 Making IDD for about 3 seconds, release the key, and your screen will display the character + which replaces Hold the international access code, then enter the country code, the area code, and the phone number and then press key to dial. the 3.1.4 Redialing a number twice. If the send key is defined as shortcut key to other menus other To redial the last number called, press than Call Log, you cannot do it. 3.1.5 Calling a saved number If you have already saved a phone number in your phone, you can use the Contacts list to find it quickly. 1. Press the left soft key (contacts shortcut key) on the home screen or press brings up a list of all saved contacts. OK key contacts. This 2. Scroll in the list to search for the contact you want, and then select the number you want to dial, and press to dial the number. 3. If you have already assigned a speed dial number to a certain contact, press the corresponding speed dial number, and then press to dial. For more information, please refer to section 3.4 Setting speed dialing. 3.2 Answering a call When you receive a call, the phone will ring, vibrate, and /or light up, and an animated phone icon will appear together with the number of the caller . If the number is stored in your Contacts list, the contacts name will appear. Press Press to answer the call. to end the call. The call duration will be displayed on the home screen for a short period of time. 12 http://www.zte.com.cn X100 User Manual V 1.0 3.2.1 Setting any key to answer calls 1. Select Menu Settings Features Any Key Answer

. 2. Select On and press OK key to set.

, and In this case, all incoming calls can be answered by pressing any key except 3.2.2 Muting an incoming call Select the right soft key silence to mute the ringer or stop the vibration when call arrives. This action will only mute the current call. The phone will still ring when the following call arrives. 3.2.3 Mute during a call You can set voice mute for a moment during a call. Select right soft key options during the call. Select Mute to block your voice. Repeat last step and select Unmute to cancel the block. 3.2.4 Adjusting the volume during a call To adjust the earpiece volume during a call, press up or down. 3.3 Dealing with missed calls If you have missed a call, Missed Call indication will appear on your screen. You can get the callers number or name. Press Done right soft key to clear the screen. Press Call Back left soft key to call it. 3.4 Setting speed dialing Speed dialing allows you to quickly dial a stored phone number by entering a one- or two-digit speed dialing number. 1. On the home screen, press 2. Select the contact to which you want to assign a speed dialing number and press options. shortcut key contacts to access your contacts list. right soft key OK key. 3. Select edit and press 4. Scroll to Speed Dial and press 5. Select an unassigned speed dial number (2-99) to assign to the phone number. 6. Select one of the contacts numbers. 7. Press save soft key to confirm the speed dial assignment. OK key. When you want to dial a speed dialing number, please enter the one- or two digit speed dialing number and press key to dial. 3.5 Calling emergency numbers You can call emergency numbers even if your account is restricted. However, while calling, your phone will be in Emergency mode, in which you cannot make normal calls. Note: Check with your service provider if the network supports this function. 13 http://www.zte.com.cn X100 User Manual V 1.0 4 Using Call Log List The call log contains all calls sent or received by your phone, includes 4 type of log lists:

All calls list, Missed calls list, Incoming calls list and Outgoing calls list. A sign is put ahead of every call number. Incoming calls. Outgoing calls. Missed calls. 4.1 Calling a number listed in the call log 1. Select Menu Call log. 2. Scroll down to select the number you want to call. Press 3. Press Call soft key to make the call. OK key. 4.2 Sending a message to the number listed in the call log 1. Select Menu Call log. 2. Highlight the number you want to send a message. Press options soft key. 3. Select Send message, press Next soft key, and then enter the text. 4. Press Send soft key. 4.3 Viewing details of a call 1. Select Menu Call log. 2. Scroll down to select the number you want to view, Press phone number, as well as the time and date of the call. OK key. You can get the callers name and his 4.4 Adding a number to the contacts list 1. Select Menu Call log. 2. Highlight the number you want to save. Press save soft key. 3. Select New contact. 4. Select the number type you want to save as. 5. Finish the following step of the contacts. For more details, please refer to section 7.1 saving a new contact. 4.5 Accessing the classified lists 1. Select Menu Call log. 2. Press options soft key. 3. Select Show call type. Press 4. Select All Calls, Missed Calls, Incoming or Outgoing. Press OK key. OK key. 4.6 Erasing a call record from the call log You can erase a record listed in your Call log. 1. Select Menu Call log. 2. Scroll down to select the record you want to delete. Press options soft key. 14 http://www.zte.com.cn X100 User Manual V 1.0 3. Select Delete. A prompt window will pop up: Delete xxxxxxxxx?

4. Select Yes to erase it. Select No to return to call log menu. 4.7 Erasing all records You can erase all records listed in your Call log menu. 1. Select Menu Call log. 2. Press option soft key. 3. Select Clear list, Press A prompt window will appear: Delete entire list?

4. Select Yes to erase all. Select No to return to call log menu. OK key. 5 Entering Letters, Numbers, and Symbols This table is a guide of how to enter letters, numbers, and symbols in the text entry mode, such as Contacts and Messages. For more detailed information, please refer to section 5.1 Understanding text entry mode. To... Enter a letter Enter a number Enter a symbol Enter a space Erase a character Erase all characters Move cursor right or left Change modes Capitalize the next letter Do this... In Multitap mode(display abc), press the appropriate alphanumeric key for some times until the letter you want appears on the display. In Numbers mode(display123), press the number key once. left , right , up or down to select the symbol In Symbols mode, press you want. Press Press Hold

. Press right or left. Press OK key to choose the current input mode. In Multitap mode and eZiText mode, press you want to capitalize. key to choose the mode 5.1 Understanding the text entry modes There are four input modes available to you when entering text, numbers, or symbols:

Multitap mode (displayed as abc) Numbers mode (displayed as 123) eZiText mode (displayed as ez) Symbols mode Note: The default input mode you start in depends on the task you are doing. For example, when entering a 15 http://www.zte.com.cn X100 User Manual V 1.0 phone number in the Contacts menu, the default text mode is Numbers, when entering text for a message, the default text mode is Multitap, and you can also choose eZiText mode or Numbers mode as default. 5.2 Entering words letter by letter (Multitap mode) 1. Press the appropriate alphanumeric key once to display the first letter that appears on the keypad, twice for the second letter, and so on. 2. Wait until the cursor move to the right before you enter the next letter. 5.3 Entering words quickly When you press a series of keys under eZiText mode, it checks the built-in dictionary for common words and predicts the word you are trying to spell. 1. For each letter of the word you wish to spell, press the appropriate alphanumeric key once. For example, to enter the word any, press the alphanumeric keys 2. If the word suggested by eZiText does not match what you want, keep pressing matches. until the word 3. When you get the word you want, press OK key to accept it. 5.4 Entering symbols While entering text, you can also enter symbols. 1. Press in number mode or press 2. You will access the table of symbols. in other mode to switch to the table of symbols. 3. Press 4. Press left, right, up or down to select a symbol. OK key to accept it. 5.5 Entering numbers In Numbers mode, press a number key once. In Multitap mode, press the key several times until the number appears on the screen. In eZiText mode, press and hold a number key until the number appears on the screen. 5.6 Changing input modes To enter characters that belong to other mode, youll need to switch between different modes. For example, to enter numbers in an email address while in Multitap mode:

OK key to switch to Numbers. 1. Press 2. Enter the number, and then Press OK key to switch to Multitap mode to complete the address. 16 http://www.zte.com.cn X100 User Manual V 1.0 6 Sending and Receiving Text Messages This chapter describes how to send, receive and erase text messages. The message consists of to 3 boxes:

inbox, sent box and draft box. Inbox can save 30 messages. Sent box can save 50 messages. Draft box can save 10 messages. Important: The features and menus described in this chapter may vary from different services available in your area. Please contact the services provider about details of SMS charge. 6.1 Sending text messages First, make sure your service provider supports SMS. You can only send text messages to the phones that are capable of receiving them. 6.1.1 Sending a new text message You can send messages to at most 5 recipients at one time. 1. Select Menu Msging Compose. 2. Enter the number of recipients you want to send.

-Or-

Press left soft key PhBook to access the contacts list, Select a contact name from the list and press key, Select a number you want from the list and press Note: You can enter at most 5 recipients. OK key. Then press left soft key Done. OK 3. Press next soft key to enter your text message. To learn how to enter letters, see section 5 Entering Letters, Numbers, and Symbols. When you edit a message, the state bar will show the maximum number of characters that can fit in the text body, as well as the current count of current entries. 4. When you finish editing your text, Press send soft key to send the message. 6.1.2 Sending a message to more than one recipients You can add at most 5 recipients from your contacts list or the phone number manually entered at one time. 1. Select Menu Msging Compose. 2. Add at most 5 recipients, You can:

1Enter the first number. Press

-Or-

2 Press Options soft key to select PhBook. key, enter the second number, and so on. 3 Select a contact name from the list and press 4 Select a number you want from the list and press 5 Press Done soft key to add the second number. 6 Repeat step 2 to 5 to add the other numbers. OK key. OK key. 3. Press Next soft key to edit the text. 4. Press Send soft key to send the message. 17 http://www.zte.com.cn X100 User Manual V 1.0 6.1.3 Sending a pre-written message If you dont want to send the current message while editing, you can save the text to the draft box and edit them later. 1. Select Menu Msging Draft. OK key. 2. Scroll through the list of drafts and press 3. Press Edit left soft key. 4. Enter the recipient number and your text. 5. Press Send left soft key, your message will be sent and saved to your Sent box. 6.1.4 Sending a saved message Whether a message was successfully sent or not, it would be automatically saved to the Sent box. You can re-use them. 1. Select Menu Msging Sent. OK key to view the message. 2. Scroll through the list of messages and press 3. Press Options right soft key to select Forward. 4. Enter the phone number manually or select one from the Contacts list. 5. Press Next left soft key to view and edit the message. 6. Press Send left soft key to send it. 6.1.5 Failing to send a message You will fail to send or receive messages if your phones memory is full, or the messaging service is not available during that time. To free up the memory, please erase old messages. See section 6.3 Erasing messages. 6.1.6 Receiving incoming calls while creating messages If you dont wish to answer the call, press Reject left soft key to reject it, and then go on with your messages. to answer the call. The message you were working on will be automatically saved to the draft box for Press you to treat it later. 6.1.7 Viewing the Sent box You can check the status of the messages you have sent as long as they have been saved to the Sent Box. 1. Select Menu Msging Sent. 2. Press 3. Press 4. Press options soft key, select an option from the list to execute the next step. up and down to scroll through the list of messages. OK key to read the message.

-Forward: send this message to another recipient by entering his/her phone number.

-Msg details: view the details of this message, including its call back number, date and time of call, etc.

-Call: call back.

-Add contact: Add this number to the contact list. 6.1.8 Viewing the Inbox You can check the status of the messages you have received as long as they have been saved to the Inbox. 1. Select Menu Msging Inbox. 2. Press up and down to scroll through the list of messages. 18 http://www.zte.com.cn X100 User Manual V 1.0 3. Press 4. Press Options soft key, select an option from the list to execute the next step. OK key to read the message.

-Reply: send a message to reply to this number.

-Forward: send this message to another recipient by entering his/her phone number.

-Msg details: to view the details of this message, including its call number, call back number, date and time of call, etc.

-Call: call back.

-Add contact: Add this number to the contact list. 6.1.9 Marking the priority You can mark the priority of messages. 1. Select Menu Msging Compose. 2. Enter the phone number and the text. 3. Press Options right soft key and select Mark urgent /Mark normal from the list. 4. Finish the following steps. 6.1.10 Using canned messages You phone store 10 common messages for you. 1. Select Menu Msging Compose. 2. Enter the phone number and the text. 3. Press Options right soft key, select Canned msgs. 4. Select one message of the list, and finish the following steps. 6.2 Receiving text messages When a new message is coming, a pop-up notification appears on the screen. Press Full view left soft key to view the message. Press Done right soft key to clear the screen and return to the idle status. 6.3 Erasing messages You will have to erase old messages as they take up memory in your phone. You have the option of erasing text messages, by erasing them one-at-a-time from the Sent or Inbox, or by erasing them automatically. 6.3.1 Erasing a single message 1. Select Menu Msging Inbox, sent or draft. 2. Scroll down to select the message you want to erase. 3. Press Delete to erase the message. A pop-up notification will appear: The message will be deleted. 4. Press Yes soft key to erase the message. 6.3.2 Auto Erase Inbox If your phones memory is limited, auto erase will delete old messages which had been read from Inbox to make room for new coming ones. This option allows the user to turn the Auto Erase feature on or off. 1. Select Menu Msging Settings Auto Erase. 2. Select on or off. 19 http://www.zte.com.cn X100 User Manual V 1.0 3. Press OK key. 6.4 Setting a different call back number You can send a call back number that is different from that of the outgoing text message. 1. Select Menu Msging Settings Callback num . 2. Select on or off, press 3. If on is selected, enter the call back number. 4. Press Save soft key. OK key. Note: The recipient can see the callback number only when his/her phone supports the function of displaying callback number. 6.5 Setting the Delivery confirmation 1. Select Menu Msging Settings Delivery conf. 2. Select on or off.

-on You can see the outgoing delivery confirmation.

-off The outgoing delivery confirmation will be processed without alerting. 3. Press OK key. 6.6 Setting the Duplicate detection The phone can automatically detect homologous incoming text messages and save them as one single copy, in order to save up your phones memory and make room for new ones. 1. Select Menu Msging Settings Dup detection . 2. Select on or off.

-on Keep the original incoming message and erase the new coming homologue ones.

-off Keep all the homologue incoming messages. 3. Press OK key. 7 Storage of Contacts The Contacts menu plays a roll as a folder of name cards for you to store information of contacts. You can add data to each element. The order in which the elements would be displayed is shown below:

First name, Last name, Home phone, Work phone, Mobile phone, Unknown phone, Pager, Email, Speed Dial, Ring tone. 7.1 Saving a new contact 1. Press Contacts shortcut key or Select Menu Contacts. 2. Press the left soft key Add. 3. First Name will be highlighted. You can enter the first name directly. To learn how to enter letters, please refer to paragraph 5.2 Entering words letter by letter . 4. Press 5. Press enter the numbers. down to highlight Last Name and enter the last name of the contact. down to highlight Home phone, Work phone, Mobile phone, Unknown phone, Pager, Email, 6. Press 7. After entering the elements of the contact, press the left soft key Save to save the information. down to highlight Speed Dials and Ring tone, press OK key to go to the next steps. 20 http://www.zte.com.cn X100 User Manual V 1.0 7.2 Adding pauses to a phone number When you save a phone number for an automated service or an extension, you may add a pause where you need to select an option. You can set multiple pauses in a phone number. A Pause will cause the phone to stop dialing until you select the Stop soft key or the pause time expired. 1. Enter the main calling number. 2. Press Options right soft key. 3. Select Insert pause and press 4. Select an option from the list. OK key.

- Hard pause: the phone will send the main calling number and then pause the dialing until you press any key other than the right soft key and the end key, then send the extension number(option selecting numbers) automatically. Or until you press the right soft key Stop, then you can enter the extension number (option selecting numbers).

- 2 seconds: the phone will send the main calling number, then pause for 2 seconds, then send the extension number(option selecting numbers) automatically.

- 5 seconds: the phone will send the main calling number, then pause for 5 seconds, then send the extension number(option selecting numbers) automatically. 5. Enter the extension numbers(option selecting numbers) and add more pauses where needed. 7.3 Viewing the information of the contacts 1. Select Menu Contacts. 2. Scroll down to select the contact you want to view. 3. Press OK key, then scroll down to view its information. 7.4 Editing a contact name 1. Select Menu Contacts. 2. Scroll down to locate the contact you wish to edit. 3. Press Options right soft key. 4. Select Edit and press 5. Move the cursor and edit the contacts name. 6. Press the left soft key Save to save the changes. OK key. 7.5 Editing a phone number 1. Select Menu Contacts. 2. Scroll down to locate the contact you wish to edit. 3. Press Options right soft key. 4. Select Edit and press 5. Move the cursor to the number you want to edit and enter the new ones. 6. Press the left soft key Save to save the changes. OK key. 7.6 Setup a default number of the contact You can set a phone number as the default contact number. 1. Select Menu Contacts. 2. Scroll down to locate the contact you wish to edit and press OK key. 21 http://www.zte.com.cn X100 User Manual V 1.0 3. Move the cursor to the number you want to set and press Options right soft key. 4. Select Set as default and press 5. A note will display to confirm the selection. 6. Press yes left soft key. OK key. 7.7 Erasing a contact 1. Select Menu Contacts. 2. Scroll down to locate the contact you wish to erase. 3. Press Options right soft key. 4. Select Delete and press 5. Delete XXXXX appears on the screen. 6. Press Yes left soft key. OK key. 7.8 Erasing a number 1. Select Menu Contacts. 2. Scroll down to locate the contact of which the number you wish to erase, then press 3. Move the cursor to the number and press Options right soft key. OK key. 4. Select Erase entry and press 5. The note Erase entry appears on the screen. 6. Press Yes left soft key. OK key. 7.9 Assigning a Ring Tone You can choose different ring tones for different contacts. 1. Select Menu Contacts. 2. Scroll down to locate the contact to which you wish to assign a ring tone, then press Options right soft key. 3. Select Edit and press OK key. 4. Scroll down to Ring tone and press 5. Select a ring tone from the list and press 6. Press Save right soft key to save the change. OK key. OK key. 7.10 Setting speed dialing You can assign a speed dialing number to the phone number of the contact. 1. Select Menu Contacts. 2. Scroll down to the contact to which you want to assign a speed dialing number, then press options right soft key. OK key. 3. Select edit and press 4. Scroll down to Speed Dial and press 5. Select an unassigned speed dial number (2-99) to assign to the phone number. 6. Select one of the contacts numbers. 7. Press save soft key to confirm the speed dial assignment. When you want to dial a speed dialing number, please enter the one- or two digit speed dialing number and OK key. press key to dial. 22 http://www.zte.com.cn X100 User Manual V 1.0 8 Calculator The phone provides a calculator tool. You can use it for basic mathematical calculations. 1. Select Menu Calc. 2. Use the keypad to enter numbers. Digits 0~9 are mapped to their respective DTMF keys. 3. Use the navigation key to enter operator symbols. Five operators (+, -, x, , =) are mapped to the 5-way navigation control. 4. Press Advanced left soft key to enter advanced operators. You can use these operators:

sqrt(x) square root x^2 square 1/x reciprocal x^y power PI (3.1415) For example, If you want to calculate 8 for square, Press 8, Advanced left soft key, x^2 in turn, The calculator will display the result 64. 5. Press Memory right soft key to store a value for later retrieval . Store: Add the displayed digit to the value stored in memory. Recall: Display the value currently stored in memory. Clear: Clear the value currently stored in memory. 6. Press key to Clear the last entry or clear the calculated result and display a zero, return the calculator to digit entry mode. 23 http://www.zte.com.cn X100 User Manual V 1.0 9 Customizing your Phone The contents of the Settings menu are as follows. Master Volume Ringer Volume Voice Volume Key Volume Sound Display Shortcuts Roaming Features Security About Properties Formatting Text Input AnyKey Answer Auto Keyguard Call Timers Touchtone Svc Tones Ring Tones Sound Effects Volumes Contrast Light timer App TimeOut UI Lang. Name Order Date&Time Banner Voice Privacy Default Reset Setting 9.1 Sound 9.1.1 Select a different ring tone X100 handset has 10 ring tones for you to select. 1. Select Menu Settings Sound Ring Tones. 2. Scroll down the list and press the left soft key Play to hear the different ring tones. Press left soft key again to stop it. OK key to select a ring tone from the list. 3. Press 9.1.2 Setting sound effects You can decide how many sound effects will be played when the phone is in use. 1. Select Menu Settings Sound Sound Effects. 2. Select an option from the list:

- Complete: play all sound effects defined. Alerts Only: System alerts only. None: no sound effects played. OK key. 3. Press 9.1.3 Setting the master volume You can choose the type of alert you receive for incoming calls. 1. Select Menu Settings Sound Volumes Master volume. 2. Select an option from the list:

24 http://www.zte.com.cn X100 User Manual V 1.0

- On: set the phone to ring during an incoming call alert.

- Off: set the phone to mute and screenlight-up only during an incoming call alert. On + Vibrate: set the phone to ring and vibrate during an incoming call alert. (vibrate for the first 10 seconds and then ring for the rest time of the incoming call alerts ). Off + Vibrate: sets the phone to vibrate during an incoming call alert. for 3 seconds in idle state. OK key. 3. Press You can also set the master volume directly by holding 9.1.4 Adjusting other volume You can adjust the volume level of the ringer, voice and key beeps. 1. Select Menu Settings Sound Volumes. 2. Select Ringer Volume, Voice Volume or Key Volume.

- Ringer Volume: for the currently selected ring tone.

- Voice Volume: for all sounds played through the earpiece.

- Key Volume: for the clicking volume when you press the keys on the keypad. 3. Scroll 4. Press the left soft key Save to save the change. up or down to adjust the volume. 9.2 Display 9.2.1 Changing the display contrast 1. Select Menu Settings Display Properties Contrast. right or left to adjust the contrast. OK key to save the change. 2. Scroll 3. Press 9.2.2 Adjusting the backlighting Your screen lights up while you are in a call or when you press a key on the keypad. However, you can decide when to turn the backlight off. 1. Select Menu Settings Display Properties Light Timer. 2. Select an option from the list:

After 10 sec: turn the backlight off 10 seconds after your last key press. After 30 sec: turn backlight off 30 seconds after your last key press. After 60 sec: turn backlight off 60 seconds after your last key press. Always Off: turns backlight off. Always On: turns backlight on. OK key. 3. Press 9.2.3 Setting the application time Set the period of time before the handset exit the applications and returns to idle state. 1. Select Menu Settings Display Properties App TimeOut. 2. Select an option from the list:

After 60 sec: return to idle state 60 seconds after your last key press. After 2 min: return to idle state 2 minutes after your last key press. After 5 min: return to idle state 5 minutes after your last key press. 25 http://www.zte.com.cn X100 User Manual V 1.0 OK key. 3. Press 9.2.4 Choosing a different language Your phone may support languages apart from English. 1. Select Menu Settings Display Formatting UI Lang. 2. Scroll to highlight a language. OK key. 3. Press 9.2.5 Setting the name order You can choose the order the names in the contacts list and in other places where contacts names are displayed. 1. Select Menu Settings Display Formatting Name Order. 2. Scroll to highlight a format. OK key. 3. Press 9.2.6 Choosing a different date format 1. Select Menu Settings Display Formatting Date & Time Date Format. 2. Scroll to highlight a format. OK key. 3. Press 9.2.7 Setting the separator of date You can select the date separator between year, month and day. 1. Select Menu Settings Display Formatting Date & Time Separator. 2. Select the separator. OK key. 3. Press 9.2.8 Choosing a different time format 1. Select Menu Settings Display Formatting Date & Time Time Format. 2. Select AM/PM or 24 hour. OK key. 3. Press 9.2.9 Setting personal banner You can set the banner on home screen. 1. Select Menu Settings Display Formatting Banner. 2. Enter the banner text. Press 3. Press Save left soft key to save the change. to erase the character. 9.3 Shortcuts You can set a shortcut to launch an application with a single key press. There are five such keys:

Left soft key these items sets the single press behavior for their corresponding key in idle state.

, Left key press

, Right soft key

, Send key

, and Right key press

. Each of 1. Select Menu Settings Shortcuts. 2. Scroll to select a key you want to define. 3. Scroll to select a menu corresponding to. 4. Press OK key to confirm. 26 http://www.zte.com.cn X100 User Manual V 1.0 9.4 Roaming You can allow or disallow your phone to access a roaming network. Make sure your phone is permitted to access a roaming network by the service provider. 1. Select Menu Settings Roaming. 2. Select On or Off. 3. Press OK key. 9.5 Phone Features 9.5.1 Clear personalized dictionary When you enter the text, the handset will automatically add words you have entered to the personalized dictionary. You can clear it. 1. Select Menu Settings Features Text Input Clear Dictionary. 2. Press the left soft key Yes to clear it. 9.5.2 Changing the default text entry You can set the default input mode. 1. Select Menu Settings Features Text Input Text Entry. OK key. 2. Scroll to select the entry type, press 9.5.3 Changing the default text language You can set the default input text language. 1. Select Menu Settings Features Text Input Text Lang. 2. Scroll to select the language type, press 9.5.4 Setting any key to answer calls 1. Select Menu Settings Features AnyKey Answer. OK key. 2. Select On and press OK key to set. All incoming calls can now be answered by pressing any key except 9.5.5 Setting keyguard You can lock the keypad to protect the phone from accidental key presses.

, 1. Select Menu Settings Features Auto Keyguard. 2. Select an option from the list:

30 Seconds: lock the keypad for 30 seconds of inactivity. 1 Minute: lock the keypad for 1 minute of inactivity. 2 Minutes: lock the keypad for 2 minutes of inactivity. 5 Minutes: lock the keypad for 5 minutes of inactivity. Off: disable the key guard. 3. Press OK key. and

. To unlock the keypad, press the left soft key Unlock then #

You can also lock the keypad directly by holding

. for 1 second in idle state. 27 http://www.zte.com.cn X100 User Manual V 1.0 9.5.6 Displaying and resetting the call timer Your phone has three timers that count the duration of the calls you have made and received. You can reset two of the timers. 1. Select Menu Settings Features Call Timers 2. Select an option from the list:

Incoming Timer: This timer shows the total duration of all incoming calls. Outgoing Timer: This timer shows the total duration of all outgoing calls. All Calls Timer: This timer shows the total duration of all types of calls .You cannot reset this timer. 3. Press the right soft key Reset to clear duration data. Press the left soft key Done to return to the current menu. 9.5.7 Changing touchtone length You can change the length of key beep tones. 1. Select Menu Settings Features Touchtone. OK key. 2. Select short or long, Press 9.5.8 Setting service tone You can set whether the handset play tones when service is acquired and lost. 1. Select Menu Settings Features Svc Tones. 2. Select on or off, Press OK key. 9.6 Security This paragraph describes all the features involved in securing your phone and preventing access to your personal information. 9.6.1 Setting voice privacy The voice can be encrypted when the handset communicate with the base stations .You can turn the function on or off. 1. Select Menu Settings Security Voice Privacy. OK key. 2. Select on or off, Press Note: This function need the service provider to support. Please consult to service provider. 9.6.2 Resetting the phone You can restore the all the phone settings to their default value, and no other information will be deleted. 1. Select Menu Settings Security Default Reset. 2. Default information appears. 3. Press the left soft key Yes to confirm. Press the right soft key No to abort. 9.7 About The about screen contains information about the MDN, ESN, BREW version, etc. 1. Select Menu Settings About. 2. The screen will display the information. Press 3. Press the left soft key Done to return to the setting menu. down to scroll the information . 28 http://www.zte.com.cn X100 User Manual V 1.0 10 Brew You can connect your phone to wireless network by multiplicate Brew platforms in this menu. The menu displayed will vary from different service providers. Scroll left/right or up /down to select the options, press OK key to enter it. Mobile shop: you can view the list of applications, download and restore the applications following the prompt. Settings: you can change the applications location in your phone and customize the icon type of applications. Help: you can get much information about brew application here , such as how to buy new application, how to remove/ disable/restore/expire applications. Note: This function need service provider to support. For more details of brew, please contact the service provider. 11 Vmail Voicemail is a separated application apart from the messaging service. A user can check his voicemail box on the network, listen or retrieve them by dialing a certain service number. Additionally, the number of voicemails can be reset to zero. To use this function, check with your service provider. 12 Clock 12.1 Setting an alarm Use the alarm to set an alert for a specific time. The handset supports 3 independent alarms. The alert occurs only if the phone is on. 1. Select Menu Clock Alarm Clock. Highlight one of the schedule list and press If there isnt any alarm, the name will display None. OK key to begin setting. 2. Begin setting, press Scroll Press number key to change the values. up, highlight Date. left or right to move cursor between day, month, and year. 3. When date is set, press Scroll Press number key to change the values. down, highlight Time. left or right to move cursor between hour and minute. 4. When time is set, press down, highlight Repeat. Press OK key to select one item:

- Never: the alarm will never repeat.

- Every day: the phone will alert at the setting time every day.

- Once a week: the phone will alert at the same day in a week as the setting date.

- Every week day: the phone will alert every weekday in a week at the same as the setting date.

- Every weekend day: the phone will alert every weekend day in a week at the same as the setting date. 5. After that, press down, highlight Ringer. Press OK key to select a ring tone from the list. 6. When you finish the setting, press left soft key Set to activate the alarm, press right soft key Cancel to cancel 29 http://www.zte.com.cn X100 User Manual V 1.0 it. 7. If you want to disable an alarm, highlight the alarm name, press Turn off right soft key. 8. When the alarm sounds, press Dismiss left soft key to turn off the alarm. If you set an alarm while the phone is in silent or vibrate mode, the note will appear Alarm will not sound in silent/vibrate mode. 12.2 Using Timer You can start/stop/reset the timer. 1. Select Menu Clock Timer. 2. Press Start left soft key to begin. 3. When the timer is running, press Stop left soft key to stop it, and the timer has an non-zero value. 4. If the timer has an non-zero value, press Reset left soft key to clear it. 12.3 Setting a Countdown You can set the duration of the countdown, when the countdown duration elapsed, the phone will ring. 1. Select Menu Clock Countdown. 2. Press Set left soft key, scroll left or right to move cursor between the hours, minutes and seconds, then press digit key to enter the values. The maximum duration that can be entered for the countdown is 99:59:59 (99 hours, 59 minutes, 59 seconds). 3. Press Save left soft key to save the value. 4. Press Options right soft key and select ring tone to assign a ring tone. Press Options right soft key and select Reset to clear the countdown. 5. Press Start left soft key to begin time count. 6. When the alarm sounds, press Dismiss left soft key to turn off the alarm . 30 http://www.zte.com.cn X100 User Manual V 1.0 13 Poker You can play games with your handset. 1. Select Menu Poker. You can continue the game with the saved game. 2. Press left soft key Play Deal, to begin the game. 3. Press left soft key Play Options, you can select these options:

- Change bet: change the bet value.

- Payouts: information about ratio of payouts and bet of different cards.

- Game restart: to begin the new game. to exit the game and return to the home screen. 4. Press 31 http://www.zte.com.cn X100 User Manual V 1.0 14 Troubleshooting Check the following reference if you have problems with your phone. Please contact your distributor if you cannot solve the problem fluently. 1. Cannot power on the phone. Check the battery power or the R-UIM card. 2. Short message cannot be sent. Check the network status. 3. Cannot make or receive a call. Check the network status. 4. No signal indicated. Make sure you are in an area where the network service is available. 5. No incoming ring tone. Check the master volume or the ring volume setting. 6. No alarm tone is sounding when the reminder time is reached. Check the sound setting. 32 http://www.zte.com.cn X100 User Manual V 1.0 15 FCC Statement Changes or modifications to this unit not expressly approved by the party responsible for compliance will void the users authority to operate the equipment. Any change to the equipment will void FCC grant. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

--Reorient or relocate the receiving antenna.

--Increase the separation between the equipment and receiver.

--Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

--Consult the dealer or an experienced radio/TV technician for help. Health and Safety Information RF Exposure Information

(SAR) THIS MOBILE PHONE MEETS THE GOVERNMENTS REQUIREMENTS FOR EXPOSURE TO RADIO WAVES. This phone is a radio transmitter and receiver. It is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S. government. These limits are part of comprehensive guidelines and establish permitted levels of RF energy for the general population. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons, regardless of age and health. The exposure standard for wireless mobile phones employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6 W/kg. Tests for SAR are conducted using standard operating positions accepted by the FCC with the phone transmitting at its highest certified power level in all tested frequency bands. Although the SAR is determined at the highest certified power level, the actual SAR level of the phone while operating can be well below the maximum value. This is because the phone is designed to operate at multiple power levels so as to use only the poser required to reach the network. In general, the closer you are to a wireless base station antenna, the lower the power output. 33 http://www.zte.com.cn X100 User Manual V 1.0 Before a mobile phone is available for sale to the public, it must be tested and certified to the FCC that it does not exceed the limit established by the government adopted requirement for safe exposure. The tests are performed in positions and locations (e.g., at the ear and worn on the body) as required by the FCC for each model. The highest SAR value for the mobile phone when tested for use at the ear is 0.030 W/kg and when worn on the body is 0.017 W/kg. While there may be differences between the SAR levels of various phones and at various positions, they all meet the government requirement. The FCC has granted an Equipment Authorization for this mobile phone with all reported SAR levels evaluated as in compliance with the FCC RF exposure guidelines. SAR information on the mobile phone is on file with the FCC and can be found under the Display Grant section of http://www.gov/oet/fccid after searching on FCC ID stock on the label on the phone. Note: In the United States and Canada, the SAR limit recommended by international guidelines for mobile phones used by the public is 1.6 watts/kilogram (W/kg) averaged over one grams of tissue. The limit incorporates a substantial margin for safety to give additional protection for the public and to account for any variations in measurements. 34 http://www.zte.com.cn