Wireless Data Terminal User Guide CDMA2000 1X Wireless Data Terminal User Guide This User Guide is used for Wireless Data Terminal of MG880. ZTE Corporation http://www.zte.com.cn Wireless Data Terminal User Guide Copyright Statement Copyright 2007 by ZTE Corporation All rights reserved. No part of this publication may be excerpted, reproduced, translated or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without the prior written permission of ZTE Corporation. ZTE Corporation reserves the right to make modifications on print errors or update specifications in this manual without prior notice. V1.0, Apr, 2007 ZTE Corporation http://www.zte.com.cn Wireless Data Terminal User Guide Table of Contents 4. 1. Introduction.............................................................................................................................1 2. Precautions..............................................................................................................................1 3. Appearance .............................................................................................................................2 3.1 Introduction.........................................................................................................................2 3.2 Insert R-UIM Card..............................................................................................................3 3.3 Operation Guide of Data Cable...........................................................................................3 Install and Uninstall................................................................................................................4 4.1 Windows 2000 ...................................................................................................................5 4.1.1 Install........................................................................................................................5 4.1.2 Uninstall...................................................................................................................9 4.2 Windows XP ....................................................................................................................10 4.2.1 Install......................................................................................................................10 4.2.2 Uninstall.................................................................................................................14 4.3 Windows Vista .................................................................................................................15 4.3.1 Install......................................................................................................................15 4.3.2 Uninstall.................................................................................................................19 5. Run the Application ..............................................................................................................20 6. Connect/Disconnect..............................................................................................................22 7. Connection Records..............................................................................................................23 8. Voice Call..............................................................................................................................24 9. Call History...........................................................................................................................28 10. Short Message.......................................................................................................................29 11. Phone Book...........................................................................................................................32 12. Setting...................................................................................................................................34 13. Help ......................................................................................................................................37 14. Connect to the Website .........................................................................................................37 15. Trouble-shooting...................................................................................................................38 16. Health and Safety Information RF Exposure Information.................................................40 ZTE Corporation http://www.zte.com.cn Wireless Data Terminal User Guide 1. Introduction Thank you for choosing MG880 CDMA2000 1X Wireless Data Terminal (hereinafter referred to as Data Terminal) of ZTE Corporation. Through a standard USB interface, Data Terminal supports CDMA2000 1X network. In the area where there is signal, it allows you to go surfing on the Internet, send & receive short messages, and make & receive phone calls. 2. Precautions
Please dont use the product near flammable or explosive materials because it might cause failure or fire.
Keep the product away from high temperature, humidity, or dust because it might cause failure.
Avoid shock, cast or impact. Please keep the product well when you dont use it.
Do not unplug the antenna. Damage cause by misuse is not covered by this warranty.
Dont use the product near the place where is weak signal or high-precision electronic device because the magnetic interference might cause the misoperation of electronic device or other problems.
Please make sure to quit the application before unplugging the terminal, otherwise it would damage the terminal or affect the normal operation of the system.
Please dont insert or pull out the card with great force to avoid damaging the interface. ZTE Corporation http://www.zte.com.cn Wireless Data Terminal User Guide 3. Appearance 3.1 Introduction Top View Rear View Tap Antenna USB Interface R-UIM Card Cover Host LED BottomView Earphone Jack LED status descriptions:
LED Yellow Green Inserting data terminal the OFF OFF The data terminal is working OFF Always ON Upon an incoming call Flash Always ON ZTE Corporation http://www.zte.com.cn Wireless Data Terminal User Guide 3.2 Insert R-UIM Card Note: If your data terminal doesnt need R-UIM card, please skip this section. 1. Pull out the tap 2. Take out the R-UIM card cover in the direction indicated by the arrow 3. Insert R-UIM card as below figure 4. Push back R-UIM card cover in the direction indicated by the arrow 3.3 Operation Guide of Data Cable Generally, the Data Terminal could be directly connected with USB port. You could also connect the Data Terminal with PC by using the accompanying data cable, as shown in the following figure. Connect Interface with Data Terminal, and interface with PC's USB port. If the power supply from USB port is insufficient, connect both interface and with USB port together. ZTE Corporation http://www.zte.com.cn Wireless Data Terminal User Guide 4. Install and Uninstall System Requirements:
The Data Terminal supports the following operating system:
Windows 2000
Windows XP
Windows Vista PC minimum configurations:
Pentium-II/233MHz CPU USB interface 2.0 (USB1.0 and 1.1 compatible) Optical Drive CD-ROM (for installation only) Memory Disk Space 64 MB 50 MB (used for installation of application) ZTE Corporation http://www.zte.com.cn Wireless Data Terminal User Guide 4.1 Windows 2000 4.1.1 Install Note: Do not insert the Data Terminal before installation. 1Find Setup.exe firstly in Data Terminal CD-ROM, double-click it to display the Welcome picture, and then click Next;
2Select the location where you want the program to be installed, and then click Next;
ZTE Corporation http://www.zte.com.cn Wireless Data Terminal User Guide 3Select Start Menu folder, and then click Next;
4When you see the window below, please click Install;
5Please wait for installation. ZTE Corporation http://www.zte.com.cn Wireless Data Terminal User Guide 6Please insert the Data Terminal into USB interface if the system prompts you to insert the hardware (If it has been inserted, please unplug it and insert again.) 7The system shall find the new hardware and install the driver automatically. Just wait a minute;
ZTE Corporation http://www.zte.com.cn 8The driver is installed successfully. Pleas click OK;
Wireless Data Terminal User Guide 9Click Finish to close the last screen of the wizard. Now you can start the application for Data Terminal. ZTE Corporation http://www.zte.com.cn Wireless Data Terminal User Guide 4.1.2 Uninstall 1Select Start -> Programs -> ZTE Wireless Terminal -> Uninstall ZTE Wireless Terminal. Click Uninstall ZTE Wireless Terminal, and you will be asked if you want to remove the program. Click Yes;
2Please wait;
3Click OK when un-installation is completed;
ZTE Corporation http://www.zte.com.cn 4.2 Windows XP Wireless Data Terminal User Guide 4.2.1 Install Note: Do not insert the Data Terminal before installation. 1Find Setup.exe firstly in the Data Terminal CD-ROM, double-click it to display the Welcome picture, and then click Next;
2Select the location where you want the program to be installed, and then click Next;
ZTE Corporation http://www.zte.com.cn Wireless Data Terminal User Guide 3Select Start Menu folder, and then click Next;
4When you see the window below, please click Install;
5Please wait for installation;
ZTE Corporation http://www.zte.com.cn Wireless Data Terminal User Guide 6Please insert the Data Terminal into USB interface if the system prompts you to insert the hardware (If it has been inserted, please unplug it and insert again.) 7The system shall find the new hardware and install the driver automatically. Just wait a minute.(Please ignore the prompt during the installation, such as USB device not recognized or Your hardware might not be able to work normally because there is an error during the hardware installation.) ZTE Corporation http://www.zte.com.cn Wireless Data Terminal User Guide 8The driver is installed successfully. Pleas click OK;
9Click Finish to close the last screen of the wizard. Now you can start the application for data terminal. ZTE Corporation http://www.zte.com.cn Wireless Data Terminal User Guide 4.2.2 Uninstall 1Select Start -> Programs -> ZTE Wireless Terminal -> Uninstall ZTE Wireless Terminal. Click Uninstall ZTE Wireless Terminal, and you will be asked if you want to remove the program. Click Yes;
2Please wait;
3Click OK when un-installation is completed. ZTE Corporation http://www.zte.com.cn 4.3 Windows Vista Wireless Data Terminal User Guide 4.3.1 Install Note: Do not insert the Data Terminal before installation. 1Find Setup.exe firstly in the Data Terminal CD-ROM, double-click it to display the Welcome picture, and then click Next;
2Select the location where you want the program to be installed, and then click Next;
ZTE Corporation http://www.zte.com.cn Wireless Data Terminal User Guide 3Select Start Menu folder, and then click Next;
4When you see the window below, please click Install;
5Please wait for installation;
ZTE Corporation http://www.zte.com.cn Wireless Data Terminal User Guide 6Please insert the Data Terminal into USB interface if the system prompts you to insert the hardware (If it has been inserted, please unplug it and insert again.) 7The system shall find the new hardware and install the driver automatically. Just wait a minute.(Please ignore the prompt during the installation, such as Device driver was not successfully installed ) ZTE Corporation http://www.zte.com.cn Wireless Data Terminal User Guide 8The driver is installed successfully. Pleas click OK;
9Click Finish to close the last screen of the wizard. Now you can start the application for data terminal. ZTE Corporation http://www.zte.com.cn Wireless Data Terminal User Guide 4.3.2 Uninstall 1Select Start -> All Programs -> ZTE Wireless Terminal -> Uninstall ZTE Wireless Terminal. Click Uninstall ZTE Wireless Terminal, and you will be asked if you want to remove the program. Click Yes;
2Please wait;
3Click OK when un-installation is completed. ZTE Corporation http://www.zte.com.cn 5. Run the Application Wireless Data Terminal User Guide After the application is installed successfully, the application icon will appear on your desktop. Double-click this icon or select from Start -> Programs ->ZTE Wireless Terminal -> ZTE Wireless Terminal. Run the application to display the following user interface. Press to display other icons. The icons on the interface are used to access the function, which indicate as below:
Connect/Disconnect Voice Call Short message Connection Records Help URL Call History Phone book Setting http://www.zte.com.cn ZTE Corporation Wireless Data Terminal User Guide 1X indication Signal strength indication. The more bars there are, the stronger signals are. CDMA network unavailable Connection indication Sleep indication Roaming indication Call indication Missed call indication Unread message indication Inbox full indication No R-UIM card inserted indication R-UIM card inserted indication Status Bar:
ZTE Corporation http://www.zte.com.cn Wireless Data Terminal User Guide 6. Connect/Disconnect Connect
Click icon to set the relevant parameters. For details, please refer to Chapter 12 Setting for details.
Click icon at the left-up corner of the interface.
After connecting to Internet, the current network information will appear on the interface. Double-click any place in the display area to view the connection drawing. Disconnect After connecting to Internet, click the rotating icon at the left-up corner of the interface. ZTE Corporation http://www.zte.com.cn Wireless Data Terminal User Guide 7. Connection Records icon to view connection records. Connection records save the previous relevant Click information including Start at, Duration and Transmit bytes, which will help you know the status easily. By switching among List, Monthly and Statistic, you could inquire the records every time, by month or by time. Note:
The relevant information contained in connection records are just for users reference rather than the charging basis. Delete Connection Records Click button to delete the records you have selected on the interface. Clear Connection Records button to delete all the records. Click ZTE Corporation http://www.zte.com.cn Wireless Data Terminal User Guide 8. Voice Call Click to enter voice call interface. Make a call
Click the digits in the right side of the interface, or input the digits directly from keyboard. Press button or press Backspace to delete the previous input digit;
press button or press Esc to clear all the inputs.
Click button in the right side of the interface or press Enter to make a call. Receive a call
When there is an incoming call, your computer will alert and the incoming caller ID will appear on the interface.
Click button in the right side of the interface or press Enter to receive the call.
Press button or press Esc to reject the call. Redial the latest outgoing call
Click button in the right side of the interface. ZTE Corporation http://www.zte.com.cn Call Waiting Wireless Data Terminal User Guide During a call, you could select to answer the second incoming call, and then you could switch between the two incoming calls. Please firstly apply for this service from your local telecom operator.
During a call, if there is a new incoming call, a pop-up window will prompt you that you have the second incoming call.
If you select to answer, please click Accept waiting call button. The previous call wont be ended, but temporarily paused.
You could switch between two incoming calls by clicking Switch call. ZTE Corporation http://www.zte.com.cn Wireless Data Terminal User Guide Three-way Call This function allows for the call among three parties. Please firstly apply for this service from your local telecom operator. Note:
You need set Show 3 way call button during calling. Please perform the setting according to chapter 12.
You could click Dial second call button during a call, input the third-party number in the pop-up window, and then press OK button to call the third party. In this case, the original call wont be ended, but temporarily paused.
If the third party answers the call, click Start conference to enter the conference call.
During three-way conference call, click Hangup second call button to end the conference call, and return to the original call. ZTE Corporation http://www.zte.com.cn Wireless Data Terminal User Guide ZTE Corporation http://www.zte.com.cn Wireless Data Terminal User Guide 9. Call History Click icon to view the call history. The outgoing/incoming calls are saved in call history, including missed calls, incoming calls, outgoing calls, and talk duration. You could select the type you want to view. Missed/Accepted/Called Calls
Click button to delete your selected record.
Click button to delete all records in Missed/Incoming/Outgoing catalog.
Click button to dial the number.
Click button to send a short message to this number.
Click button to save this number to the phone book. Statistic
Click button to clear the talk duration. ZTE Corporation http://www.zte.com.cn Wireless Data Terminal User Guide 10. Short Message button to select the recipient from phone Click icon to enter Short message interface. Send a Message
Input the text.
Input the recipients number or click book.
Add more recipients if you like.
Select priority.
Click button to send a message.
Click button to save the text into outbox. ZTE Corporation http://www.zte.com.cn Wireless Data Terminal User Guide The received messages will be saved in the Data Terminal In-box. After the Data Terminal In-box is full, the system will automatically move the messages in the Data Terminal In-box to the PC In-box, and clean out the Data Terminal In-box. You could copy the messages from the Data Terminal In-box to PC In-box by selecting Copy or Copy All; you could also copy the messages from PC In-box to the Data Terminal In-box by selecting Copy. The sent messages and unsent but saved messages will be all saved in the Out-box. Take Data Terminal In-box as an example:
Reply
Click to reply to the sender. Forward
Click to forward this message to other recipients. Dial Senders Number
Click to dial the senders phone number. Save Senders Number
Click to save the senders number into phone book. Delete ZTE Corporation http://www.zte.com.cn Wireless Data Terminal User Guide
Click to delete your selected records. Clear
Click to delete all the records in the inbox.. Copy
Click to copy your selected record into PC. Copy All
Click to copy all the records from the data terminal to PC. ZTE Corporation http://www.zte.com.cn 11. Phone Book Wireless Data Terminal User Guide Click terminal or in the computer. Click the pull-down menu to select the storage location. to view the Phone book. You could select to save the contacts either in the data You could copy the contacts from the data terminal to your computer or from the computer to the data terminal by clicking or
. Add
Click then input the contents and select OK to add a new contact. Modify
Click then modify the contents and select OK to modify the contact information. Dial from the phone book
Click to dial your selected phone number. Send messages from the phone book
Click to compose the text. You could send the message to multiple recipients. ZTE Corporation http://www.zte.com.cn Wireless Data Terminal User Guide Search for contacts
Click to search for the contacts by name or number. Delete
Click to delete your selected contact. Delete All
Click to delete all the contacts. Copy
Click to copy your selected contacts to other storage location. Copy All
Click to copy all contacts to other storage location. ZTE Corporation http://www.zte.com.cn 12. Setting Wireless Data Terminal User Guide Click to enter the setting interface. Network Connection Setting
Set up the relevant parameters on the Network interface.
After the setting, click Apply button to save the settings on the current interface.
Click Default button and then Apply button to restore the settings on the current interface to factory default. Note:
The default network setup parameters are as below. Different regions may have different network setup parameters, so please consult your local telecom operator. Phone: #777 User: card Password: card ZTE Corporation http://www.zte.com.cn Wireless Data Terminal User Guide Other Setting:
Click Options to switch the interface, and you could set URL and select the skin, language, etc. If you want to use conference call, please select Show 3 way call button during calling;
After the setting, click Apply button to save the settings on the current interface.
Click Change Password button to set lock device. The password is required when you start the application. The setting has nothing to do with "Default" button.
If your data terminal needs R-UIM card, please click the button Enable Pin. PIN code is needed when the application is started. The setting has nothing to do with "Default"
button.
Click Default button and then Apply button to restore the settings on the current interface to factory default. ZTE Corporation http://www.zte.com.cn Wireless Data Terminal User Guide Select ring tone
After clicking Ring, you could set different ring tones for Call coming, New message, Call connected, Call disconnected and Waiting call.
After the setting, click Apply button to save the settings on the current interface.
Click Default button and then Apply button to restore the settings on the current interface to factory default. Supplementary Services
After clicking Service, you could set Unconditional forwarding, Busy Forwarding, No answer forwarding, Call waiting, etc. Double-click the selected option to modify the service number and forwarding number. ZTE Corporation http://www.zte.com.cn Wireless Data Terminal User Guide
After the setting, click button to send the corresponding request to the network system.
After the setting, click Apply button to save the settings on the current interface.
Click Default button and then Apply button to restore the settings on the current interface to factory default. 13. Help Click button to view the help file.
Click Help button to view the relevant help file; click Online service to enter our companys website.
You could view the software version information under About. 14. Connect to the Website button to directly connect the website you set. For details on the website setting, Click please refer to Chapter 12 Setting. ZTE Corporation http://www.zte.com.cn Wireless Data Terminal User Guide 15. Trouble-shooting After the installation, go to device manager and find ZTE USB Modem 3197 under Modem and ZTE Diagnostics Interface 3197 under Port. If they are not found, please remove the software and reinstall. ZTE Corporation http://www.zte.com.cn Wireless Data Terminal User Guide Common Failures Table:
Failures Causes Error occurs when running setup.exe file. The setup file may be damaged. Directly run the software before the Data Terminal is plugged in. The port is occupied by other applications, such as Hyper terminal, or the software is already run. R-UIM card is not inserted. R-UIM card inserted properly. Sometimes the front side and back side are confused. R-UIM card is damaged. Validate by using a CDMA terminal. Antenna is not connected to the Access Box. Out of the network service area. isnt The antenna or RF component is damaged. Wrong setting of parameters (Phone, User, Password) Not enough money in R-UIM card. Network congestion or failure. The Data Terminal is being connected. (It usually occurs when the Internet connection is immediately made after the call is dialed) Poor network signal. The operating system needs Update Roll 1 patch for Win2K SP4. installing Open port failed. No R-UIM card. No signal indicated. Dialing failed Internet connection failure. The driver might be unable to work and the application is unable to run normally if the terminal is pulled out and plugged in again when the application is being used under Win2000 operating system (SP4).In this case, the device manager will be marked with yellow exclamation mark, and the system must be restarted to run normally. device in Solutions Please download the program on our website WWW.ZTEMT.COM and reinstall it. Close the software, plug in the Data Terminal and run it again. Close relevant software and run the software again. Insert R-UIM card. Please to Properly insert R-UIM card. refer section 3.2. Replace R-UIM card. Insert the antenna into the Data Terminal. Make sure it is in the CDMA network service area. Replace relevant damaged parts. Correct the parameter settings. Consult your service provider for details. Consult your service provider for details. Try again later. Reconnect. if the antenna View signal strength indication and check is properly inserted. Please download the patch from the following web site and install it. http://www.microsoft.com/do wnloads/details.aspx?familyi d=B54730CF-8850-4531-B5 2B-BF28B324C662&display lang=en If the problems cannot be solved after the above handling, please call 86-755-26010555 or feed back your information directly by sending emails to zte_mobile@zte.com.cn for customer service. We will reply to you as soon as possible and provide you with high quality after-sales services. ZTE Corporation http://www.zte.com.cn Wireless Data Terminal User Guide 16. Health and Safety Information RF Exposure Information THIS DEVUCE MEETS THE GOVERNMENTS REQUIREMENTS FOR EXPOSURE TO RADIO WAVES. This device is a radio transmitter and receiver. It is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S. government. These limits are part of comprehensive guidelines and establish permitted levels of RF energy for the general population. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons, regardless of age and health. The exposure standard for wireless mobile phones employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6 W/kg. Tests for SAR are conducted using standard operating positions accepted by the FCC with the phone transmitting at its highest certified power level in all tested frequency bands. Before a mobile phone is available for sale to the public, it must be tested and certified to the FCC that it does not exceed the limit established by the government adopted requirement for safe exposure. The tests are performed in positions and locations (e.g., at the ear and worn on the body) as required by the FCC. While there may be differences between the SAR levels of various devices and at various positions, they all meet the government requirement. The FCC has granted an Equipment Authorization for this mobile phone with all reported SAR levels evaluated as in compliance with the FCC RF exposure guidelines. SAR information on the mobile phone is on file with the FCC and can be found under the Display Grant section of http://www.gov/oet/fccid after searching on FCC ID stock on the label on the device. Note: In the United States and Canada, the SAR limit recommended by international guidelines for mobile phones used by the public is 1.6 watts/kilogram (W/kg) averaged over one grams of tissue. The limit incorporates a substantial margin for safety to give additional protection for the public and to account for any variations in measurements. ZTE Corporation http://www.zte.com.cn