all | frequencies |
|
exhibits | applications |
---|---|---|---|---|
manual |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 2 |
|
Users Manual | Users Manual | 4.72 MiB | October 10 2011 | |||
1 2 | Cover Letter(s) | October 10 2011 | ||||||
1 2 | Cover Letter(s) | October 10 2011 | ||||||
1 2 | External Photos | October 10 2011 | ||||||
1 2 | Internal Photos | October 10 2011 | ||||||
1 2 | ID Label/Location Info | October 10 2011 | ||||||
1 2 | RF Exposure Info | October 10 2011 | ||||||
1 2 | Test Report | October 10 2011 | ||||||
1 2 | Test Report | October 10 2011 | ||||||
1 2 | Test Setup Photos | October 10 2011 |
1 2 | Users Manual | Users Manual | 4.72 MiB | October 10 2011 |
ZXA10 F660 GPON ONT User Manual Version: V1.0 ZTE CORPORATION NO. 55, Hi-tech Road South, ShenZhen, P.R.China Postcode: 518057 Tel: +86-755-26771900 Fax: +86-755-26770801 URL: http://ensupport.zte.com.cn E-mail: support@zte.com.cn LEGAL INFORMATION Copyright 2011 ZTE CORPORATION. The contents of this document are protected by copyright laws and international treaties. Any reproduction or distribution of this document or any portion of this document, in any form by any means, without the prior written consent of ZTE CORPORATION is prohibited. Additionally, the contents of this document are protected by contractual confidentiality obligations. All company, brand and product names are trade or service marks, or registered trade or service marks, of ZTE CORPORATION or of their respective owners. This document is provided as is, and all express, implied, or statutory warranties, representations or conditions are disclaimed, including without limitation any implied warranty of merchantability, fitness for a particular purpose, title or non-infringement. ZTE CORPORATION and its licensors shall not be liable for damages resulting from the use of or reliance on the information contained herein. ZTE CORPORATION or its licensors may have current or pending intellectual property rights or applications covering the subject matter of this document. Except as expressly provided in any written license between ZTE CORPORATION and its licensee, the user of this document shall not acquire any license to the subject matter herein. ZTE CORPORATION reserves the right to upgrade or make technical change to this product without further notice. Users may visit ZTE technical support website http://ensupport.zte.com.cn to inquire related information. The ultimate right to interpret this product resides in ZTE CORPORATION. Revision History Revision No. Revision Date Revision Reason R1.0 20110718 First Edition Serial Number: SJ-20110718111034-001 Publishing Date: 2011-07-18 (R1.0) Contents Preface............................................................................................................. I Chapter 1 Overview.................................................................................... 1-1 1.1 Product Introduction ........................................................................................... 1-1 1.2 Packing List ....................................................................................................... 1-2 1.3 Features and Specifications ................................................................................ 1-2 1.4 Product Appearance........................................................................................... 1-3 1.5 System Requirements ........................................................................................ 1-6 1.6 System Application Environment ......................................................................... 1-6 Chapter 2 Configuration Preparation ....................................................... 2-1 2.1 Preliminary Setup............................................................................................... 2-1 2.2 Configuring TCP/IP ............................................................................................ 2-1 2.3 Logging In to the Device ..................................................................................... 2-6 Chapter 3 Device Status ............................................................................ 3-1 3.1 Device Information ............................................................................................. 3-1 3.2 Network Connection Information.......................................................................... 3-2 3.3 User Interface Information................................................................................... 3-3 3.3.1 WLAN Interface Information ...................................................................... 3-3 3.3.2 Ethernet Interface Information ................................................................... 3-4 3.3.3 VoIP Status Information ............................................................................ 3-5 Chapter 4 Network Configuration ............................................................. 4-1 4.1 Configuring WAN Connection.............................................................................. 4-1 4.2 WLAN Configuration........................................................................................... 4-5 4.2.1 Configuring Basic WLAN Parameters ........................................................ 4-5 4.2.2 Configuring Multi-SSID Parameters ........................................................... 4-7 4.2.3 Configuring Security Properties ................................................................. 4-8 4.2.4 Viewing Associated Devices ................................................................... 4-12 4.3 Address Management Configuration.................................................................. 4-13 4.3.1 Configuring DHCP Server ....................................................................... 4-13 4.3.2 Configuring DHCP Binding...................................................................... 4-15 4.3.3 Configuring Specific Address Range........................................................ 4-16 4.4 Route Management Configuration ..................................................................... 4-17 4.4.1 Configuring Default Gateway................................................................... 4-17 4.4.2 Configuring Static Routing ...................................................................... 4-18 I Chapter 5 Security Configuration ............................................................. 5-1 5.1 Configuring Firewall............................................................................................ 5-1 5.2 Configuring IP Filter............................................................................................ 5-2 5.3 Configuring URL Filter ........................................................................................ 5-5 5.4 Configuring DMZ Host ........................................................................................ 5-7 5.5 Configuring Port Forwarding ............................................................................... 5-9 Chapter 6 Service Configuration............................................................... 6-1 6.1 SIP VoIP Service Configuration ........................................................................... 6-1 6.1.1 Configuring VoIP WAN Connection............................................................ 6-1 6.1.2 Configuring SIP........................................................................................ 6-2 6.1.3 Configuring SIP Accounts ......................................................................... 6-4 6.1.4 Configuring VoIP Advanced Parameters .................................................... 6-5 6.1.5 Configuring VoIP Media Parameters.......................................................... 6-7 6.1.6 Configuring Fax........................................................................................ 6-8 6.2 Configuring DDNS............................................................................................ 6-10 6.3 Configuring UPnP .............................................................................................6-11 6.4 DNS Configuration ........................................................................................... 6-13 6.4.1 Configuring Domain Name...................................................................... 6-13 6.4.2 Configuring Host Name .......................................................................... 6-14 6.5 QoS Configuration............................................................................................ 6-16 6.5.1 Configuring Basic QoS Parameters ......................................................... 6-16 6.5.2 Configuring QoS Rule............................................................................. 6-19 6.5.3 Configuring QoS Rule Type..................................................................... 6-20 6.5.4 Configuring QoS Local Application .......................................................... 6-22 6.5.5 Configuring QoS Queue Management ..................................................... 6-23 6.5.6 Configuring QoS Ingress Rate Limit......................................................... 6-25 6.6 Configuring SNTP Client................................................................................... 6-26 6.7 IGMP Configuration.......................................................................................... 6-28 6.7.1 Configuring Basic IGMP Parameters ....................................................... 6-28 6.7.2 Configuring Multicast VLAN .................................................................... 6-31 6.7.3 Configuring Multicast MAC Limit.............................................................. 6-32 6.7.4 Configuring MVLAN Tag Strip.................................................................. 6-34 6.8 Configuring FTP Application.............................................................................. 6-36 Chapter 7 Device Management ................................................................. 7-1 7.1 TR069 Configuration .......................................................................................... 7-1 7.1.1 Configuring Basic TR069 Parameters........................................................ 7-1 7.1.2 Importing TRO69 Certificate...................................................................... 7-3 II 7.2 User Management.............................................................................................. 7-4 7.3 Device Management........................................................................................... 7-5 7.3.1 System Management................................................................................ 7-5 7.3.2 Software Upgrade .................................................................................... 7-6 7.3.3 Configuration Management....................................................................... 7-8 7.4 Log Management ............................................................................................... 7-9 7.5 Ping Diagnosis................................................................................................. 7-10 Chapter 8 FAQ............................................................................................. 8-1 8.1 FAQ .................................................................................................................. 8-1 Glossary .......................................................................................................... I III IV Preface Purpose This manual provides procedures and guidelines that support the operation on the ZXA10 F660 Optical Network Terminal (ZXA10 F660 for short). Intended Audience This manual is intended for engineers and technicians who perform operation activities on ZXA10 F660. Prerequisite Skill and Knowledge To use this manual effectively, users should have a general understanding of wireless telecommunications technology. Familiarity with the following is helpful:
l ZXA10 system and its various components l Local operating procedures What Is in This Manual This manual contains the following chapters:
Chapter Summary Chapter Chapter 1, Overview Chapter 2, Configuration Preparation Chapter 3, Device Status Chapter 4, Network Configuration Chapter 5, Security Configuration Summary Provides an overview of the product, including the packing list, product features, appearance, and system requirements, and system application environment. Describes the procedures for configuring TCP/IP, and logging in to the device. Describes the device information, network connection information, and user interface information. Describes the configuration of WAN connection, WLAN, address management, and route management. Describes the procedures for configuring the firewall, IP filter, URL filter, DMZ, and port forwarding. I Chapter Summary Describes the configuration of VoIP, DDNS, UPnP, DNS server, QoS, SNTP client, IGMP, and FTP application. Describes TRO69 configuration, user management, device management, log management, and ping diagnosis. Provides the FAQs and solutions. Chapter 6, Service Configuration Chapter 7, Device Management Chapter 8, FAQ Related Documentation None Conventions ZTE documents employ the following typographical conventions. Typographical Conventions Typeface Italics Quotes Bold CAPS Constant width
I Note:
Checkpoint:
Meaning References to other Manuals and documents. Links on screens. Menus, menu options, function names, input fields, radio button names, check boxes, drop-down lists, dialog box names, window names. Keys on the keyboard and buttons on screens and company name. Text that you type, program code, files and directory names, and function names. Optional parameters Mandatory parameters Select one of the parameters that are delimited by it. Note: Provides additional information about a certain topic. Checkpoint: Indicates that a particular step needs to be checked before proceeding further. II Typeface Tip:
Meaning Tip: Indicates a suggestion or hint to make things easier or more productive for the reader. Mouse Operation Conventions are as follows:
Mouse Operation Conventions Typeface Click Double-click Right-click Drag How to Get in Touch Meaning Refers to clicking the primary mouse button
(usually the left mouse button) once. Refers to quickly clicking the primary mouse button (usually the left mouse button) twice. Refers to clicking the secondary mouse button
(usually the right mouse button) once. Refers to pressing and holding a mouse button and moving the mouse. The following sections provide information on how to obtain support for the documentation and the software. Customer Support you have problems, comments, or If questions, contact us by suggestions regarding your product, e-mail at support@zte.com.cn. You can also call our customer support center at (86) 755 26771900 and (86) 800-9830-9830. Documentation Support this document. ZTE welcomes your comments and suggestions on the quality and usefulness of For further questions, comments, or suggestions on the documentation, you can contact us by e-mail at doc@zte.com.cn; or you can fax your comments and suggestions to (86) 755 26772236. You can also browse our website at http://ensupport.zte.com.cn, which contains various interesting subjects like documentation, knowledge base, forum and service request. Declaration of RoHS Compliance To minimize the environmental impact and take more responsibility to the earth we live, this document shall serve as formal declaration that ZXA10 F660 manufactured by ZTE CORPORATION is in compliance with the Directive 2002/95/EC of the European III Parliament - RoHS (Restriction of Hazardous Substances) with respect to the following substances:
l Lead (Pb) l Mercury (Hg) l Cadmium (Cd) l Hexavalent Chromium (Cr (VI)) l PolyBrominated Biphenyls (PBB's) l PolyBrominated Diphenyl Ethers (PBDE's) This declaration is issued based on our current level of knowledge. Since conditions of use are outside our control, ZTE CORPORATION makes no warranties, express or implied, and assumes no liability in connection with the use of this information. IV Chapter 1 Overview Table of Contents Product Introduction ...................................................................................................1-1 Packing List................................................................................................................1-2 Features and Specifications .......................................................................................1-2 Product Appearance...................................................................................................1-3 System Requirements ................................................................................................1-6 System Application Environment ................................................................................1-6 1.1 Product Introduction ZXA10 F660 is a user-side access device module. It uses the computer network technology and broadband optical network technology to establish a home network center for the access of network devices. It provides users with various services. Table 1-1 lists the ports and functions of ZXA10 F660 series products. Table 1-1 ZXA10 F660 Ports and Functions Product ZXA10 F660 ZXA10 F668 ZXA10 F600G ZXA10 F627 ZXA10 F625G ZXA10 F607 Port Function Four GE ports, two POTS ports, one Wi-Fi port, and two USB 2.0 ports Supports Internet access, IPTV, VoIP, and Wi-Fi. It can be used as a home gateway. Four GE ports, two POTS ports, one Wi-Fi port, two USB 2.0 ports, and one CATV port Supports Internet access, IPTV, VoIP, Wi-Fi, and CATV. It can be used as a home gateway. Four GE ports and two USB 2.0 ports Supports Internet access and IPTV. Four GE ports, two POTS ports, and one Wi-Fi port Four GE ports, two POTS port and one CATV port Four GE ports and one Wi-Fi port Supports Internet access, IPTV, VoIP, and Wi-Fi. It can be used as a home gateway. Supports Internet access, IPTV, VoIP, and CATV. It can be used as a home gateway. Supports Internet access, IPTV, and Wi-Fi. It can be used as a home gateway. SJ-20110718111034-001|2011-07-18 (R1.0) ZTE Proprietary and Confidential 1-1 ZXA10 F660 User Manual 1.2 Packing List Make sure that ZXA10 F660 package contains the following:
l One ZXA10 F660 host l One AC-DC adaptor l One RJ-45 straight-through cable l Two RJ-11 telephone cables l One ZXA10 F660 Optical Network Terminal User Manual If any of the above contents is missing or damaged, please contact your dealer. Keep the packing box and components for the replacement purpose. 1.3 Features and Specifications System Features ZXA10 F660 has the following features:
l MAC cache: 4K l Multicast services: 1024 multicast groups l VLAN range: 1 - 4095 l GEM ports: 256 l T-CONTs: 40 Interface Features The interface features are as follows:
l GPON interface: complies with the PON standard and SC/APC, in compliance with ITU G.984.1 - G.984.5 standards l Ethernet interface: 10/100/1000 Mbps GE interfaces (RJ-45), in compliance with IEEE 802.3 and IEEE 802.3u standards l POTS interface: RJ-11 l WLAN interface: complying with the IEEE 802.11n standard with built-in antenna Technical Features ZXA10 F660 implements data access and IP voice access. l For data access, ZXA10 F660 implement L2 data switching and forwarding. By working with relevant network devices through signaling protocols such as H.248 and SIP, ZXA10 F660 implements IP voice function. l ZXA10 F660 provides the security, QoS, and network management functions, such as multi-level authentication based on devices, users, and services. It supports data channel encryption, implementation of QoS requirements matching the local devices and network according to services with different requirements, and network management based on various management modes. 1-2 SJ-20110718111034-001|2011-07-18 (R1.0) ZTE Proprietary and Confidential Chapter 1 Overview Certification Features This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation. RF exposure information: The Maximum Permissible Exposure (MPE) level has been calculated based on a distance of d=20 cm between the device and the human body. To maintain compliance with RF exposure requirement, use product that maintain a 20cm distance between the device and human body. Note:
Changes or modifications made to this equipment not expressly approved by
(ZTE Corporation) may void the FCC authorization to operate this equipment. Product Specifications ZXA10 F660 specifications are as follows:
l Rated current: 1.3 A l Rated voltage: 12 V DC l Operating temperature: -5 - 50 l Operating humidity: 5% - 95%
l Dimensions: 260 mm x 50 mm x 185 mm (Width x Height x Depth) 1.4 Product Appearance Front Panel Figure 1-1 shows the front panel of ZXA10 F660. Figure 1-1 Front Panel Table 1-2 lists LEDs on the front panel. SJ-20110718111034-001|2011-07-18 (R1.0) ZTE Proprietary and Confidential 1-3 ZXA10 F660 User Manual Table 1-2 Front Panel LEDs LED PON LOS WLAN Status Green, ON OFF Flashing Red, ON OFF Flashing Green, ON OFF POTS1 POTS2 Green, ON Power indicator LAN1 - LAN4 OFF Flashing Blue, ON OFF Green, ON OFF Flashing 1-4 Description The ONT GPON is registered and the link is activated. The ONT is not discovered and registered. The ONT is trying to be registered or set up the connection. The ONU receives the optical power abnormally. The ONU receives the optical power normally. The IP address for the WAN connection is obtained. Fails to obtain the IP address for the WAN connection. The WLAN function is enabled. The device is not powered ON or the wireless interface is disabled. The device is registered on the SS, but no data is being transmitted. The device is not powered ON or fails to be registered on the SS. Data is being transmitted. The device is powered ON normally. The device is not powered ON. The network interface is connected, but no data is being transmitted. The device is not powered ON or the network interface is not connected with a network device. Data is being transmitted. SJ-20110718111034-001|2011-07-18 (R1.0) ZTE Proprietary and Confidential Back Panel Figure 1-2 shows the back panel. Figure 1-2 Back Panel Chapter 1 Overview Table 1-3 lists the interfaces and buttons on the back panel. Table 1-3 Interfaces and Buttons on the Back Panel Interface/Button LAN1 - LAN4 POTS1 POTS2 USB UPS POWER WPS WLAN RESET Side Panel Description RJ-45 LAN interface, connects to the local network through the RJ-45 network cable RJ-11 telephone interface, connects to the telephone through the RJ-11 telephone cable USB interface, connects to a storage device or printer that has a USB interface Secondary power monitoring interface Power socket, connects to the power adapter, 12 V DC WPS access switch WLAN button, to enable or disable WLAN When the device is powered ON, press the button for more than 5 seconds to restore the factory default settings. The side panel has an SC/APC single-mode fiber interface, implementing the services provided by the ISP in PON access mode. It connects to the GPON interface of ZXA10 F660 through an SC/APC single-mode fiber. Figure 1-3 shows the side panel. SJ-20110718111034-001|2011-07-18 (R1.0) ZTE Proprietary and Confidential 1-5 ZXA10 F660 User Manual Figure 1-3 Side Panel 1.5 System Requirements The ZXA10 F660 system requirements are as follows:
l An ISP is needed so that the device can access the services provided by the ISP through the PON access mode. l A computer that is installed with a 10 Mbps/100 Mbps/1000 Mbps Ethernet card is needed. l If necessary, create a medium and small LAN by adding Ethernet hubs and cables. l To use wireless access, an 802.11g/b wireless network card or a built-in 802.11g/b wireless network card is required. l The computer that accesses the network should be installed with Windows 98/Me/2000/NT/XP/Vista/7 or Linux, network card driver program, and TCP/IP protocol, and its network settings are correct. l A computer in the LAN is installed with a Web browser, such as Microsoft Internet Explorer 6.0 or higher, Netscape Communicator 4.0 or higher. 1.6 System Application Environment ZXA10 F660 is an indoor device of ZTE series optical network terminal equipment. It works with the PON device to implement the FTTH application. With the use of multiple user interfaces, hub, or Ethernet switch, ZXA10 F660 can implement the FTTO/B application. Figure 1-4 shows the ZXA10 F660 application environment. SJ-20110718111034-001|2011-07-18 (R1.0) ZTE Proprietary and Confidential 1-6 Figure 1-4 System Application Environment Chapter 1 Overview As an indoor device, ZXA10 F660 can be put on the desk with the base or hung on the wall without the base. Figure 1-5 shows the ZXA10 F660 on a wall. Figure 1-5 F66x Wall-Mount SJ-20110718111034-001|2011-07-18 (R1.0) ZTE Proprietary and Confidential 1-7 ZXA10 F660 User Manual This page intentionally left blank. SJ-20110718111034-001|2011-07-18 (R1.0) ZTE Proprietary and Confidential 1-8 Chapter 2 Configuration Preparation Table of Contents Preliminary Setup.......................................................................................................2-1 Configuring TCP/IP ....................................................................................................2-1 Logging In to the Device.............................................................................................2-6 2.1 Preliminary Setup Generally, the ISP has already configured the device. The user can directly use it after hardware connection. However, the user may need to configure the device in some special situations. The user must confirm the following preliminary setups:
l Use one crossover or straight-through Ethernet cable to connect a computer to the device. l Check the TCP/IP settings of the computer. l Disable any running firewall or security software. l Disable the proxy server of the Internet Explorer. l Consult the ISP if some data from the ISP is needed. 2.2 Configuring TCP/IP Short Description Perform this procedure to configure TCP/IP of a computer connected to the ZXA10 F660. Context This instance takes Windows XP as an example. The default network settings for the ZXA10 F660 are as follows:
l IP address: 192.168.1.1 l Subnet mask: 255.255.255.0 l Default gateway: 192.168.1.1 To configure TCP/IP, perform the following steps:
Steps 1. Choose Start > Settings > Network Connections to open the Network Connections window. SJ-20110718111034-001|2011-07-18 (R1.0) ZTE Proprietary and Confidential 2-1 ZXA10 F660 User Manual 2. Double-click Local Area Connection to open the Local Area Connection Status dialog box, as shown in Figure 2-1. Figure 2-1 Local Area Connection Status 3. Click Properties in the General tab to open the Local Area Connection Properties dialog box. 4. Select Internet Protocol (TCP/IP), as shown in Figure 2-2. SJ-20110718111034-001|2011-07-18 (R1.0) ZTE Proprietary and Confidential 2-2 Figure 2-2 Local Area Connection Properties Chapter 2 Configuration Preparation 5. Click Properties to open the Internet Protocol (TCP/IP) Properties dialog box. Select Use the following IP address and specify the IP address, Subnet mask, and Default gateway. For example, you can set the IP address to 192.168.1.7, Subnet mask to 255.255.255.0, and Default gateway to 192.168.1.1, as shown in Figure 2-3. SJ-20110718111034-001|2011-07-18 (R1.0) ZTE Proprietary and Confidential 2-3 ZXA10 F660 User Manual Figure 2-3 Specifying the IP address in the Internet Protocol (TCP/IP) Properties Note:
The IP address shall be in the same network segment as LAN port address of the device, which means the IP address you type in should be 192.168.1.x (x can be any value from 2 to 254). 6. Click OK to save your settings. Note:
If you are accessing the WEB page of the device for the first time, please configure the device as you are told. End of Steps 2-4 SJ-20110718111034-001|2011-07-18 (R1.0) ZTE Proprietary and Confidential Chapter 2 Configuration Preparation Follow-Up Action 1. Choose Start > Run to open the Run dialog box. 2. Type CMD in the Open text box, and click OK. 3. Type ping 192.168.1.1 in the pop-up window and press Enter to carry out the ping command. l If the command window displays the messages, as shown in Figure 2-4, it indicates that the communication between your PC and the device is normal and you are able to access the Internet now. Figure 2-4 Successful Ping Message l If the command window displays the messages, as shown in Figure 2-5, it indicates that the communication between your PC and the device fails. Figure 2-5 Failed Ping Message If the communication between your PC and the device fails, ensure the following items:
SJ-20110718111034-001|2011-07-18 (R1.0) ZTE Proprietary and Confidential 2-5 ZXA10 F660 User Manual l The Ethernet cable between the device and your PC has been connected properly. l The driver of your network adapter has been installed properly. l The TCP/IP setting has been configured correctly on your PC. If the ZXA10 F660 IP address is 192.168.1.1, the IP address of the computer must be from 192.168.1.2 to 192.168.1.254. The subnet mask must be 255.255.255.0 and the default gateway must be 192.168.1.1. 2.3 Logging In to the Device Short Description Perform this procedure to log in to the device. Prerequisites The device is properly connected and the computer is correctly configured. Context To log in to the device, perform the following steps:
Steps 1. Open the Internet Explorer. Enter http://192.168.1.1 (default IP address of the device) on the address bar and press Enter. The login dialog box is displayed, as shown in Figure 2-6. Figure 2-6 Login 2. Enter the Username and Password (by default, both are admin ). Click Login. End of Steps Result Logging in to the device is successful. 2-6 SJ-20110718111034-001|2011-07-18 (R1.0) ZTE Proprietary and Confidential Chapter 3 Device Status Table of Contents Device Information .....................................................................................................3-1 Network Connection Information.................................................................................3-2 User Interface Information ..........................................................................................3-3 3.1 Device Information On the Web interface of the device, click the Status tab. By default, the Device Information is selected. The right pane displays the device type, serial number, and version information, and registration password, as shown in Figure 3-1. Figure 3-1 Device Information Table 3-1 lists the parameters for the device information. Table 3-1 Device Information Parameters Parameter Model Serial Number Hardware Version Software Version Boot Loader Version PON Serial Number Description Device type Device serial number Hardware version number Software version number Boot version number PON serial number SJ-20110718111034-001|2011-07-18 (R1.0) ZTE Proprietary and Confidential 3-1 ZXA10 F660 User Manual Parameter Password Description Password used by the ONU registration on the OLT 3.2 Network Connection Information On the Status tab, select Network Interface. By default, the WAN Connection sub-node is selected. The right pane displays the WAN connection information, as shown in Figure 3-2. Click Refresh to view the latest information. Figure 3-2 WAN Connection Table 3-2 lists the parameters for the network connection information. Table 3-2 Parameters for the Network Connection Information Parameter omci1 VLAN ID NAT IP DNS Default Gateway Connection Status Description WAN connection type VLAN ID used by the WAN interface to send and receive data Whether to enable the NAT function IP address used by ZXA10 F660 DNS used by ZXA10 F660 Gateway used by ZXA10 F660 WAN connection status SJ-20110718111034-001|2011-07-18 (R1.0) ZTE Proprietary and Confidential 3-2 Chapter 3 Device Status Note:
OMCI1 is the WAN connection name, which is created by the OMCI interface remotely. 3.3 User Interface Information This topic includes the following:
l WLAN Interface Information l Ethernet Interface Information l VoIP Status Information 3.3.1 WLAN Interface Information On the Status tab, select User Interface. By default, WLAN is selected. The right pane displays the WLAN switch information, packet receiving and sending information, and authentication information, as shown in Figure 3-3. Click Refresh to view the latest information. Figure 3-3 WLAN Interface Information Table 3-3 lists the parameters for the WLAN interface information. 3-3 SJ-20110718111034-001|2011-07-18 (R1.0) ZTE Proprietary and Confidential ZXA10 F660 User Manual Table 3-3 Parameters for the WLAN Interface Information Parameter Enable Wireless RF Channel SSID1 Enable SSID1 Name Authentication Type Encryption Type MAC Address Description Whether to enable the wireless RF Channel Whether to enable the wireless network SSID1 SSID1 name, which identifies the wireless network service area Authentication mode Encryption mode MAC address Packets Received/Bytes Received Number of received packets or bytes Packets Sent/Bytes Sent Error Packets Received Error Packets Sent Discarded Receiving Packets Discarded Sending Packets Number of sent packets or bytes Error packets received Error packets sent Discarded receiving packets Discarded sending packets 3.3.2 Ethernet Interface Information On the Status tab, select User Interface. Select Ethernet. The right pane displays the packet receiving and sending information on the Ethernet interface, as shown in Figure 3-4. Click Refresh to view the latest information. SJ-20110718111034-001|2011-07-18 (R1.0) ZTE Proprietary and Confidential 3-4 Figure 3-4 Ethernet Interface Information Chapter 3 Device Status Table 3-4 lists the parameters for the Ethernet interface information. Table 3-4 Parameters for the Ethernet Interface Information Parameter Ethernet Port Description Port name Packets Received/Bytes Received Number of received packets or bytes Packets Sent/Bytes Sent Number of sent packets or bytes Error Frames Ethernet error frames 3.3.3 VoIP Status Information On the Status tab, select User Interface. Select VoIP Status. The right pane displays the VoIP status information, as shown in Figure 3-5. Click Refresh to view the latest information. SJ-20110718111034-001|2011-07-18 (R1.0) ZTE Proprietary and Confidential 3-5 ZXA10 F660 User Manual Figure 3-5 VoIP Status Information Table 3-5 lists the parameters for the VoIP status information. Table 3-5 Parameters for the VoIP Status Information Parameter SIP Account Username SIP Register Status Description Telephone number Registration status of the voice service SJ-20110718111034-001|2011-07-18 (R1.0) ZTE Proprietary and Confidential 3-6 Chapter 4 Network Configuration Table of Contents Configuring WAN Connection.....................................................................................4-1 WLAN Configuration...................................................................................................4-5 Address Management Configuration ........................................................................4-13 Route Management Configuration ............................................................................4-17 4.1 Configuring WAN Connection Short Description Perform this procedure to configure the WAN connection. Prerequisites The user has logged in to the Web interface of the device. Context To configure the WAN connection, perform the following steps:
Steps 1. On the Web interface of the device, click the Network tab. By default, WAN Connection is selected, as shown in Figure 4-1. Figure 4-1 WAN Connection SJ-20110718111034-001|2011-07-18 (R1.0) ZTE Proprietary and Confidential 4-1 ZXA10 F660 User Manual 2. The connection type can be PPPoE, Static, or DHCP. a. Configure the PPPoE mode. Select PPPoE for Type, as shown in Figure 4-2. Figure 4-2 PPPoE Mode Configuration Table 4-1 lists the parameters for the PPPoE mode configuration. Table 4-1 Parameters for PPPoE Mode Configuration Parameter Type Connection Name Enable NAT Service List VLAN ID Username Password Authentication Type Description Connection mode PPPoE connection name, automatically generated by the system Whether to enable the NAT function Service modes supported by the system:
l TR069 service mode Remote maintenance and management mode l Internet service mode Broadband and IPTV service mode l VoIP service mode Voice service mode VLAN ID User name, used by the device authentication on interworking Password, used by the device authentication on interworking Authentication type, the same as the authentication type for the uppper-layer device SJ-20110718111034-001|2011-07-18 (R1.0) ZTE Proprietary and Confidential 4-2 Chapter 4 Network Configuration Parameter Connection Trigger Description Dial-up connection mode:
l Always On l On Demand l Manual Idle Timeout Idle time before the dial-up auto disconnection, available only in On Demand mode b. Configure the static mode. Select Static for Type, as shown in Figure 4-3. Figure 4-3 Static Mode Configuration Table 4-2 lists the parameters for the static mode configuration. Table 4-2 Static Mode Configuration Parameter Type Connection Name Enable NAT Service List Description Connection mode Static connection name, automatically generated by the system Whether to enable the NAT function Service modes supported by the system:
l TR069 service mode Remote maintenance and management mode l Internet service mode Broadband and IPTV service mode l VoIP service mode Voice service mode SJ-20110718111034-001|2011-07-18 (R1.0) ZTE Proprietary and Confidential 4-3 ZXA10 F660 User Manual Parameter VLAN ID IP Address Subnet Mask Default Gateway Description VLAN ID IP address used by ZXA10 F660 Subnet mask used by ZXA10 F660 Gateway used by ZXA10 F660 DNS Server1 IP Address IP address of DNS1 used by ZXA10 F660 DNS Server2 IP Address IP address of DNS2 used by ZXA10 F660 DNS Server3 IP Address IP address of DNS3 used by ZXA10 F660 c. Configure the DHCP mode. Select DHCP for Type, as shown in Figure 4-4. Figure 4-4 DHCP Mode Configuration Table 4-3 lists the parameters for the DHCP mode configuration. Table 4-3 DHCP Mode Configuration Parameter Type Connection Name Enable NAT Service List VLAN ID 4-4 Description Connection mode DHCP connection name, automatically generated by the system Whether to enable the NAT function Service modes supported by the system:
l TR069 service mode Remote maintenance and management mode l Internet service mode Broadband and IPTV service mode l VoIP service mode Voice service mode VLAN ID SJ-20110718111034-001|2011-07-18 (R1.0) ZTE Proprietary and Confidential 3. Click Create to finish the configuration. Click Cancel to cancel the configuration. Chapter 4 Network Configuration End of Steps Result WAN connection configuration is complete. 4.2 WLAN Configuration This topic includes the following:
l Configuring Basic WLAN Parameters l Configuring Multi-SSID Parameters l Configuring Security Properties l Viewing Associated Devices 4.2.1 Configuring Basic WLAN Parameters Short Description Perform this procedure to configure the basic WLAN parameters. Prerequisites The user has logged in to the Web interface of the device. Context To configure the basic WLAN parameters, perform the following steps:
Steps 1. On the Network tab, select WLAN on the left pane. By default, the Basic sub-node is selected, as shown in Figure 4-5. SJ-20110718111034-001|2011-07-18 (R1.0) ZTE Proprietary and Confidential 4-5 ZXA10 F660 User Manual Figure 4-5 Basic WLAN Configuration 2. Configure the basic WLAN parameters, as listed in Table 4-4. Table 4-4 Basic WLAN Parameters Parameter Description Enable Wireless RF Whether to enable wireless RF Mode Wireless communication mode Country/Region Country or region name Channel Wireless channel number Select a proper channel according to the country code Beacon Interval Beacon interval Tx Rate Data transmission rate A low data transmission rate can enlarge the wireless communication area. Transmitting Power Transmission power QoS Type RTS Threshold DTIM Interval Fragment Threshold QoS priority type RTS threshold DTIM interval Fragment threshold If a packet size exceeds this threshold, the packet is divided into several fragments for transmission. 3. Click Submit to finish the configuration. Click Cancel to cancel the configuration. End of Steps SJ-20110718111034-001|2011-07-18 (R1.0) ZTE Proprietary and Confidential 4-6 Chapter 4 Network Configuration Result The basic WLAN parameters are configured. 4.2.2 Configuring Multi-SSID Parameters Short Description Perform this procedure to configure multi-SSID parameters. Prerequisites The user has logged in to the Web interface of the device. Context To configure multi-SSID parameters, perform the following steps:
Steps 1. On the Network tab, click WLAN on the left pane. Select Multi-SSID Settings, as shown in Figure 4-6. Figure 4-6 Multi-SSID Settings 2. Configure the multi-SSID parameters as shown in Table 4-5. Table 4-5 Multi-SSID Parameters Parameter Choose SSID Hide SSID Enable SSID Description Choose the SSID that needs to be configured. Disable or enable SSID broadcast. Enable the SSID. SJ-20110718111034-001|2011-07-18 (R1.0) ZTE Proprietary and Confidential 4-7 ZXA10 F660 User Manual Parameter SSID Name Description SSID name. It cannot exceed 32 characters and is case sensitive. It is used to control the WLAN access. The SSID name must match all the SSIDs of the related access nodes; otherwise, the device cannot be accessed. Up to four WLAN sub-ports are supported. 3. Click Submit to finish the configuration. Click Cancel to cancel the configuration. End of Steps Result The multi-SSID parameters are configured. 4.2.3 Configuring Security Properties Short Description Perform this procedure to configure the security properties. Prerequisites The user has logged in to the Web interface of the device. Context To configure the security properties, perform the following steps:
Steps 1. On the Network tab, select WLAN, and then select Security, as shown in Figure 4-7. Figure 4-7 Security Properties SSID supports four authentication modes: Open System, Shared Key, WPA-PSK, and WPA2-PSK. 4-8 SJ-20110718111034-001|2011-07-18 (R1.0) ZTE Proprietary and Confidential Chapter 4 Network Configuration 2. From the Choose SSID drop-down list, select an SSID. a. In Authentication Type, select Open System, and then enable WEP Encryption it is disabled). The Open System configuration information is
(by default, displayed, as shown in Figure 4-8. Figure 4-8 Open System Configuration Table 4-6 lists the parameters for the Open System authentication mode. Table 4-6 Parameters for Open System Authentication Mode Parameter Description Choose SSID Current SSID Authentication Type Current SSID authentication mode WEP Encryption To enable or disable WEP encryption WEP Encryption Level WEP encryption length l The 128bit encryption can be a 13bit ASCII codes or a 26bit hexadecimal number. l The 64bit encryption can be a 5bit ASCII code or a 10bit hexadecimal number. Generally, the 64bit encryption can meet the user requirements. To enhance security, use the 128bit encryption. WEP Key Index Current encryption value WEP Key1 WEP Key2 WEP encryption value Range: 5bit ASCII code or 10bit hexadecimal number WEP encryption value Range: 5bit ASCII code or 10bit hexadecimal number SJ-20110718111034-001|2011-07-18 (R1.0) ZTE Proprietary and Confidential 4-9 ZXA10 F660 User Manual Parameter WEP Key3 WEP Key4 Description WEP encryption value Range: 5bit ASCII code or 10bit hexadecimal number WEP encryption value Range: 5bit ASCII code or 10bit hexadecimal number b. In Authentication Type, select Shared Key. By default, WEP Encryption is enabled. The Shared Key configuration information is displayed, as shown in Figure 4-9. Figure 4-9 Shared Key Configuration Table 4-7 lists the parameters for the Shared Key authentication mode. Table 4-7 Parameters for Shared Key Authentication Mode Parameter Description Choose SSID Current SSID Authentication Type Current SSID authentication mode WEP Encryption To enable or disable WEP encryption WEP Encryption Level WEP encryption length l The 128bit encryption can be a 13bit ASCII codes or a 26bit hexadecimal number. l The 64bit encryption can be a 5bit ASCII code or a 10bit hexadecimal number. Generally, the 64bit encryption can meet the user requirements. To enhance security, use the 128bit encryption. WEP Key Index Current encryption value 4-10 SJ-20110718111034-001|2011-07-18 (R1.0) ZTE Proprietary and Confidential Chapter 4 Network Configuration Parameter WEP Key1 WEP Key2 WEP Key3 WEP Key4 Description WEP encryption value Range: 5bit ASCII code or 10bit hexadecimal number WEP encryption value Range: 5bit ASCII code or 10bit hexadecimal number WEP encryption value Range: 5bit ASCII code or 10bit hexadecimal number WEP encryption value Range: 5bit ASCII code or 10bit hexadecimal number c. In Authentication Type, select WPA-PSK. The WPA-PSK configuration information is displayed, as shown in Figure 4-10. Figure 4-10 WPA-PSK Configuration Table 4-8 lists the parameters for the WPA-PSK authentication mode. Table 4-8 Parameters for WPA-PSK Authentication Mode Parameter Choose SSID Authentication Type WPA Passphrase Description Current SSID Current SSID authentication mode WPA pre-shared key Range: 8 63 characters WPA Group Key Update Interval Update interval of the WPA group key WPA Encryption Algorithm WPA encryption algorithm SJ-20110718111034-001|2011-07-18 (R1.0) ZTE Proprietary and Confidential 4-11 ZXA10 F660 User Manual Note:
The configuration method for the WPA2-PSK authentication mode is the same as that for the WPA-PSK authentication mode. 3. Click Submit to finish the configuration. Click Cancel to cancel the configuration. End of Steps Result The security properties are configured. 4.2.4 Viewing Associated Devices Short Description Perform this procedure to view the associated devices. Prerequisites The user has logged in to the Web interface of the device. Context To view the associated devices, perform the following steps:
Steps 1. On the Network tab, select WLAN, and then select Associated Device, as shown in Figure 4-11. Figure 4-11 Associated Device SJ-20110718111034-001|2011-07-18 (R1.0) ZTE Proprietary and Confidential 4-12 2. Select SSID, and then click Refresh to view the MAC addresses of the associated Chapter 4 Network Configuration devices. End of Steps Result The associated devices are listed. 4.3 Address Management Configuration This topic includes the following:
l Configuring DHCP Server l Configuring DHCP Binding l Configuring Specific Address Range 4.3.1 Configuring DHCP Server Short Description Perform this procedure to configure the DHCP server. Prerequisites The user has logged in to the Web interface of the device. Context To configure the DHCP server, perform the following steps:
Steps 1. On the Network tab, select Address Management. By default, DHCP Server is selected, as shown in Figure 4-12. SJ-20110718111034-001|2011-07-18 (R1.0) ZTE Proprietary and Confidential 4-13 ZXA10 F660 User Manual Figure 4-12 DHCP Server 2. On the DHCP Server tab, configure the parameters, as listed in Table 4-9. Table 4-9 Parameters for DHCP Server Configuration Parameter LAN IP Address Subnet Mask Enable DHCP Server DHCP Start IP Address DHCP End IP Address DNS Server1 IP Address DNS Server2 IP Address DNS Server3 IP Address Default Gateway Lease Time Description IP address of the LAN group (interface subnet) Subnet mask of the LAN group To enable or disable the DHCP server Starting IP address allocated by the DHCP server Ending IP address allocated by the DHCP server IP address of the DNS server IP address of the DNS server IP address of the DNS server IP address of the default gateway Lease time of the IP address by the DHCP server 3. Click Submit to finish the configuration. Click Cancel to cancel the configuration. End of Steps Result The DHCP server is configured. SJ-20110718111034-001|2011-07-18 (R1.0) ZTE Proprietary and Confidential 4-14 4.3.2 Configuring DHCP Binding Chapter 4 Network Configuration Short Description Perform this procedure to configure the DHCP binding. Prerequisites The user has logged in to the Web interface of the device. Context To configure the DHCP binding, perform the following steps:
Steps 1. On the Network tab, select Address Management, and then select DHCP Binding, as shown in Figure 4-13. Figure 4-13 DHCP Binding 2. Configure binding between the MAC address and IP address. Create a DHCP binding table to map the client MAC address to the IP address. The DHCP server allocates IP addresses according to the binding relations, and the binding relations do not expire. For example, if the MAC address is set to 00-0a-e2-c6-48-ba and the IP address is set to 192.168.1.113, it indicates that the DHCP server allocates the IP address 192.168.1.113 to the host which the MAC address corresponds to. Note:
The IP address belongs to the address pool that is provided by the DHCP server in the LAN group. SJ-20110718111034-001|2011-07-18 (R1.0) ZTE Proprietary and Confidential 4-15 ZXA10 F660 User Manual 3. Click Add to finish the configuration. Click Modify to modify the configuration. Click Delete to delete the configuration. End of Steps Result DHCP binding is configured. 4.3.3 Configuring Specific Address Range Short Description Perform this procedure to configure the specific address range. Prerequisites The user has logged in to the Web interface of the device. Context To configure the special address range, perform the following steps:
Steps 1. On the Network tab, select Address Management, and then select Specific Address Range, as shown in Figure 4-14. Figure 4-14 Specific Address Range 2. Click Modify to modify the parameters, as shown in Figure 4-15. SJ-20110718111034-001|2011-07-18 (R1.0) ZTE Proprietary and Confidential 4-16 Figure 4-15 Specific Address Range Configuration Chapter 4 Network Configuration 3. In Start IP Address and End IP Address, enter the IP addresses, and then click Modify. End of Steps Result The specific address range is configured. 4.4 Route Management Configuration This topic includes the following:
l Configuring Default Gateway l Configuring Static Routing 4.4.1 Configuring Default Gateway Short Description Perform this procedure to configure the default gateway. Prerequisites The user has logged in to the Web interface of the device. Context To configure the default gateway, perform the following steps:
Steps 1. On the Network tab, select Routing Management. By default, Default Gateway is selected, as shown in Figure 4-16. 4-17 SJ-20110718111034-001|2011-07-18 (R1.0) ZTE Proprietary and Confidential ZXA10 F660 User Manual Figure 4-16 Default Gateway 2. From WAN Connection, select the connection interface at the WAN side. Note:
This interface is available when configured on WAN Connection. 3. Click Submit to finish the configuration. Click Cancel to cancel the configuration. End of Steps Result The default gateway is configured. 4.4.2 Configuring Static Routing Short Description Perform this procedure to configure the static routing. Prerequisites The user has logged in to the Web interface of the device. Context To configure the static routing, perform the following steps:
Steps 1. On the Network tab, select Routing Management, and then select Static Routing, as shown in Figure 4-17. SJ-20110718111034-001|2011-07-18 (R1.0) ZTE Proprietary and Confidential 4-18 Figure 4-17 Static Routing Chapter 4 Network Configuration Table 4-10 lists the parameters for static routing configuration. Table 4-10 Parameters for Static Routing Configuration Parameter WAN Connection Network Address Subnet Mask Default Gateway Description Network-side interface type Network address Subnet mask Gateway 2. From the WAN Connection drop-down list, select the network-side interface. 3. Configure Network Address, Subnet Mask, and Default Gateway, as shown in Figure 4-18. Figure 4-18 Static Routing Configuration 4. Click Add to finish the configuration, as shown in Figure 4-19. Click Modify to modify the configuration. Click Delete to delete the configuration. SJ-20110718111034-001|2011-07-18 (R1.0) ZTE Proprietary and Confidential 4-19 ZXA10 F660 User Manual Figure 4-19 Static Routing Configuration Completed End of Steps Result The static routing is configured. SJ-20110718111034-001|2011-07-18 (R1.0) ZTE Proprietary and Confidential 4-20 Chapter 5 Security Configuration Table of Contents Configuring Firewall....................................................................................................5-1 Configuring IP Filter....................................................................................................5-2 Configuring URL Filter................................................................................................5-5 Configuring DMZ Host................................................................................................5-7 Configuring Port Forwarding.......................................................................................5-9 5.1 Configuring Firewall Short Description Perform this procedure to configure the firewall. Prerequisites The user has logged in to the Web interface of the device. Context To configure the firewall, perform the following steps:
Steps 1. On the Web interface, click the Security tab. By default, Firewall is selected, as shown in Figure 5-1. Figure 5-1 Firewall Configuration 2. Set the firewall parameters, as listed in Table 5-1. 5-1 SJ-20110718111034-001|2011-07-18 (R1.0) ZTE Proprietary and Confidential ZXA10 F660 User Manual Table 5-1 Firewall Parameters Parameter Description Enable Anti-Hacking Protection To enable or disable anti-hacking protection Firewall Level Firewall level l High: Allow legal WAN-side access but prohibit WAN-side ping. l Low: Allow legal WAN-side access and WAN-side ping. 3. Click Submit to finish the configuration. Click Cancel to cancel the configuration. End of Steps Result The firewall is configured. 5.2 Configuring IP Filter Short Description Perform this procedure to configure IP filter. Prerequisites The user has logged in to the Web interface of the device. Context To configure IP filter, perform the following steps:
Steps 1. On the Security tab, select IP Filter, as shown in Figure 5-2. SJ-20110718111034-001|2011-07-18 (R1.0) ZTE Proprietary and Confidential 5-2 Figure 5-2 IP Filter Chapter 5 Security Configuration Table 5-2 lists the parameters for IP filter configuration. Table 5-2 Parameters for IP Filter Configuration Parameter Enable Protocol Name Description To enable the IP filter function Protocol Name Start Source IP Address End Source IP Address Starting source IP address Ending source IP address Start Destination IP Address Starting destination IP address End Destination IP Address Ending destination IP address Start Source Port End Source Port Start Destination Port End Destination Port Ingress Egress Starting source port number Ending source port number Starting destination port number Ending destination port number Ingress interface Egress interface Mode Discard Permit Mode, including discard and permit 5-3 SJ-20110718111034-001|2011-07-18 (R1.0) ZTE Proprietary and Confidential ZXA10 F660 User Manual 2. On the IP Filter tab, set the filter parameters, as shown in Figure 5-3. Figure 5-3 IP Filter Configuration 3. Click Add to finish the configuration, as shown in Figure 5-4. Click Modify to modify the configuration. Click Delete to delete the configuration. SJ-20110718111034-001|2011-07-18 (R1.0) ZTE Proprietary and Confidential 5-4 Figure 5-4 IP Filter Configuration Completed Chapter 5 Security Configuration End of Steps Result IP filter is configured. 5.3 Configuring URL Filter Short Description Perform this procedure to configure the URL filter. Prerequisites The user has logged in to the Web interface of the device. Context To configure the URL filter, perform the following steps:
Steps 1. On the Security tab, select URL Filter, as shown in Figure 5-5. SJ-20110718111034-001|2011-07-18 (R1.0) ZTE Proprietary and Confidential 5-5 ZXA10 F660 User Manual Figure 5-5 URL Filter Table 5-3 lists the parameters for URL filter configuration. Table 5-3 Parameters for URL Filter Configuration Parameter Enable Mode URL Address Description To enable the URL filter function Mode, including discard and permit URL address 2. On the URL Filter tab, set the filter parameters, as shown in Figure 5-6. Figure 5-6 URL Filter Configuration 3. Click Add to finish the configuration, as shown in Figure 5-7. Click Delete to delete the configuration. SJ-20110718111034-001|2011-07-18 (R1.0) ZTE Proprietary and Confidential 5-6 Figure 5-7 URL Filter Configuration Completed Chapter 5 Security Configuration End of Steps Result URL filter is configured. 5.4 Configuring DMZ Host Short Description Perform this procedure to configure the DMZ host. Prerequisites The user has logged in to the Web interface of the device. Context To configure the DMZ host, perform the following steps:
Steps 1. On the Security tab, select DMZ Host, as shown in Figure 5-8. SJ-20110718111034-001|2011-07-18 (R1.0) ZTE Proprietary and Confidential 5-7 ZXA10 F660 User Manual Figure 5-8 DMZ Host 2. Configure the DMZ host parameters, as shown in Figure 5-9. Figure 5-9 DMZ Host Configuration Table 5-4 lists the parameters for DMZ host configuration. Table 5-4 Parameters for DMZ Host Configuration Parameter Enable Description To enable the DMZ host WAN Connection WAN-side connection interface DMZ Host IP Address IP address of the DMZ host Note:
After the DMZ full port mapping function is enabled, all the ports are enabled by default. The LAN-side host provides services through DNAT. 3. Click Submit to finish the configuration. Click Cancel to cancel the configuration. End of Steps 5-8 SJ-20110718111034-001|2011-07-18 (R1.0) ZTE Proprietary and Confidential Chapter 5 Security Configuration Result The DMZ host is configured. 5.5 Configuring Port Forwarding Short Description Perform this procedure to configure port forwarding. Prerequisites The user has logged in to the Web interface of the device. Context To configure port forwarding, perform the following steps:
Steps 1. On the Security tab, select Port Forwarding, as shown in Figure 5-10. Figure 5-10 Port Forwarding 2. Configure the port forwarding parameters, as shown in Figure 5-11. SJ-20110718111034-001|2011-07-18 (R1.0) ZTE Proprietary and Confidential 5-9 ZXA10 F660 User Manual Figure 5-11 Port Forwarding Configuration Table 5-5 lists the parameters for port forwarding configuration. Table 5-5 Parameters for Port Forwarding Configuration Parameter Enable Name Protocol Description To enable the port forwarding function Host name Protocol name, including TCP, UDP, as well as TCP and UDP protocols WAN Host IP Address Starting IP address of the WAN-side host WAN Connection WAN Start Port WAN End Port LAN Host IP Address LAN Host Port Note:
WAN connection Starting port number of the WAN-side host Ending port number of the WAN-side host IP address of the LAN-side host Port number of the LAN-side host If a redirection policy of port access with the source address of the WAN-side IP address and the destination address of the LAN-side IP address is configured, it is used in the scenario where the WAN-side client accesses the LAN-side server. SJ-20110718111034-001|2011-07-18 (R1.0) ZTE Proprietary and Confidential 5-10 Chapter 5 Security Configuration 3. Click Add to finish the configuration, as shown in Figure 5-12. Click Modify to modify the configuration. Click Delete to delete the configuration. Figure 5-12 Port Forwarding Configuration Completed End of Steps Result Port forwarding is configured. SJ-20110718111034-001|2011-07-18 (R1.0) ZTE Proprietary and Confidential 5-11 ZXA10 F660 User Manual This page intentionally left blank. SJ-20110718111034-001|2011-07-18 (R1.0) ZTE Proprietary and Confidential 5-12 Chapter 6 Service Configuration Table of Contents SIP VoIP Service Configuration ..................................................................................6-1 Configuring DDNS....................................................................................................6-10 Configuring UPnP ....................................................................................................6-11 DNS Configuration ...................................................................................................6-13 QoS Configuration....................................................................................................6-16 Configuring SNTP Client ..........................................................................................6-26 IGMP Configuration..................................................................................................6-28 Configuring FTP Application.....................................................................................6-36 6.1 SIP VoIP Service Configuration This topic includes the following:
l Configuring VoIP WAN Connection l Configuring SIP l Configuring SIP Accounts l Configuring VoIP Advanced Parameters l Configuring VoIP Media Parameters l Configuring Fax 6.1.1 Configuring VoIP WAN Connection Short Description Perform this procedure to configure the VoIP WAN connection. Prerequisites The user has logged in to the Web interface of the device. Context To configure the VoIP WAN connection, perform the following steps:
Steps 1. On the Web interface, click the Application tab. Select VoIP. By default, WAN Connection is selected, as shown in Figure 6-1. SJ-20110718111034-001|2011-07-18 (R1.0) ZTE Proprietary and Confidential 6-1 ZXA10 F660 User Manual Figure 6-1 WAN Connection 2. Select a connection interface from WAN Connection. 3. Click Submit to finish the configuration. Click Cancel to cancel the configuration. End of Steps Result The VoIP WAN connection is configured. 6.1.2 Configuring SIP Short Description Perform this procedure to configure SIP. Prerequisites The user has logged in to the Web interface of the device. Context To configure SIP, perform the following steps:
Steps 1. On the Application tab, select VoIP, and then select SIP Protocol, as shown in Figure 6-2. SJ-20110718111034-001|2011-07-18 (R1.0) ZTE Proprietary and Confidential 6-2 Figure 6-2 SIP Protocol Chapter 6 Service Configuration 2. Configure the SIP protocol parameters, as listed in Table 6-1. Table 6-1 Parameters for SIP Protocol Configuration Parameter Local Port Description Local port number used by the VoIP protocol Primary Proxy Server IP address of the primary proxy server Primary Outbound Proxy Server IP address of the primary outbound proxy server Primary Proxy Port Port number of the primary proxy server Secondary Proxy Server IP address of the secondary proxy server Secondary Outbound Proxy Server IP address of the secondary outbound proxy server Secondary Proxy Port Register Expires Port number of the secondary proxy server Registration expiration time Unit: second 3. Click Submit to finish the configuration. Click Cancel to cancel the configuration. End of Steps Result SIP is configured. SJ-20110718111034-001|2011-07-18 (R1.0) ZTE Proprietary and Confidential 6-3 ZXA10 F660 User Manual 6.1.3 Configuring SIP Accounts Short Description Perform this procedure to configure SIP accounts. Prerequisites The user has logged in to the Web interface of the device. Context To configure SIP accounts, perform the following steps:
Steps 1. On the Application tab, select VoIP, and then select SIP Accounts, as shown in Figure 6-3. Figure 6-3 SIP Accounts 2. Click Modify to modify the account parameters, as shown in Figure 6-4. SJ-20110718111034-001|2011-07-18 (R1.0) ZTE Proprietary and Confidential 6-4 Figure 6-4 SIP Account Configuration Chapter 6 Service Configuration Table 6-2 lists the parameters for SIP account configuration. Table 6-2 Parameters for SIP Account Configuration Parameter Username Password URI Description Name of the SIP authentication user Password of the SIP authentication user User registration identification, that is, the user SIP call number 3. Click Modify. End of Steps Result The SIP accounts are configured. 6.1.4 Configuring VoIP Advanced Parameters Short Description Perform this procedure to configure the VoIP advanced parameters. Prerequisites The user has logged in to the Web interface of the device. 6-5 SJ-20110718111034-001|2011-07-18 (R1.0) ZTE Proprietary and Confidential ZXA10 F660 User Manual Context To configure the VoIP advanced parameters, perform the following steps:
Steps 1. On the Application tab, select VoIP, and then select Advanced, as shown in Figure 6-5. Figure 6-5 Advanced Parameters 2. Configure the advanced parameters, as shown in Table 6-3. Table 6-3 Advanced Parameters Parameter Description Echo Cancellation To enable or disable echo cancellation VAD&CNG DTMF Jitter Buffer Min Value Max Value To enable or disable VAD and CNG DTMF mode, including RFC2833, RFC2198, and DTMF in Voice Jitter buffer, including fixed and adaptive Minimum jitter buffer value Unit: ms Maximum jitter buffer value Unit: ms 3. Click Submit to finish the configuration. Click Cancel to cancel the configuration. End of Steps 6-6 SJ-20110718111034-001|2011-07-18 (R1.0) ZTE Proprietary and Confidential Chapter 6 Service Configuration Result The VoIP advanced parameters are configured. 6.1.5 Configuring VoIP Media Parameters Short Description Perform this procedure to configure the VoIP media parameters. Prerequisites The user has logged in to the Web interface of the device. Context To configure VoIP media parameters, perform the following steps:
Steps 1. On the Application tab, select VoIP, and then select Media, as shown in Figure 6-6. Figure 6-6 Media Parameters 2. Configure the media parameters, as shown in Figure 6-7. SJ-20110718111034-001|2011-07-18 (R1.0) ZTE Proprietary and Confidential 6-7 ZXA10 F660 User Manual Figure 6-7 Media Parameter Configuration Table 6-4 lists the media parameters. Table 6-4 Media Parameters Parameter Codec Selection Codec Priority Description Code type Code priority The smaller the value is, the higher the priority is. 3. Click Submit to finish the configuration. Click Cancel to cancel the configuration. End of Steps Result The VoIP media parameters are configured. 6.1.6 Configuring Fax Short Description Perform this procedure to configure fax. Prerequisites The user has logged in to the Web interface of the device. SJ-20110718111034-001|2011-07-18 (R1.0) ZTE Proprietary and Confidential 6-8 Chapter 6 Service Configuration Context To configure fax, perform the following steps:
Steps 1. On the Application tab, select VoIP, and then select Fax, as shown in Figure 6-8. Figure 6-8 Fax Configuration 2. Select Enable T38. Note:
To disable T38 fax mode, clear the check box. 3. Click Submit to finish the configuration. Click Cancel to cancel the configuration. End of Steps Result Fax is configured. SJ-20110718111034-001|2011-07-18 (R1.0) ZTE Proprietary and Confidential 6-9 ZXA10 F660 User Manual 6.2 Configuring DDNS Short Description Perform this procedure to configure DDNS. Prerequisites The user has logged in to the Web interface of the device. Context After DDNS is applied, the host that has the dynamic IP address can also provide the domain name service. For example, when the host obtains an IP address through xDSL dial-up or DHCP server dynamic allocation, and the host provides the domain name service, by using DDNS, the effect on the domain name access when the IP address changes is eliminated. To configure DDNS, perform the following steps:
Steps 1. On the Application tab, select DDNS, as shown in Figure 6-9. Figure 6-9 DDNS 2. Configure the DDNS parameters, as shown in Figure 6-10. SJ-20110718111034-001|2011-07-18 (R1.0) ZTE Proprietary and Confidential 6-10 Figure 6-10 DDNS Configuration Chapter 6 Service Configuration Table 6-5 lists the parameters for DDNS configuration. Table 6-5 Parameters for DDNS Configuration Parameter Enable Server Username Password Domain Description To enable the DDNS function Server address If the GNUDIP HTTP protocol is used, the sever address is a URL address. By default, it is http://ns.eagleeyes.com.cn/cgi-bin/gdipupdt.cgi. DDNS server user name DDNS server password Domain name corresponding to the user, valid only when the GNUDIP protocol is used WAN Connection WAN-side connection interface 3. Click Submit to finish the configuration. Click Cancel to cancel the configuration. End of Steps Result DDNS is configured. 6.3 Configuring UPnP Short Description Perform this procedure to configure UPnP. SJ-20110718111034-001|2011-07-18 (R1.0) ZTE Proprietary and Confidential 6-11 ZXA10 F660 User Manual Prerequisites The user has logged in to the Web interface of the device. Context The UPnP function supports zero configuration and device auto-discovery. After this function is configured, the device can be dynamically added to a network to obtain the IP address, announce the function, and know the functions of other devices. To configure UPnP, perform the following steps:
Steps 1. On the Application tab, select UPnP, as shown in Figure 6-11. Figure 6-11 UPnP 2. Configure the UPnP parameters, as shown in Figure 6-12. Figure 6-12 UPnP Configuration SJ-20110718111034-001|2011-07-18 (R1.0) ZTE Proprietary and Confidential 6-12 Chapter 6 Service Configuration Table 6-6 lists the UPnP parameters. Table 6-6 UPnP Parameters Parameter Enable Description To enable UPnP WAN Connection omci1 WAN-side connection interface 3. Click Submit to finish the configuration. Click Cancel to cancel the configuration. End of Steps Result UPnP is configured. 6.4 DNS Configuration This topic includes the following:
l Configuring Domain Name l Configuring Host Name 6.4.1 Configuring Domain Name Short Description Perform this procedure to configure the domain name. Prerequisites The user has logged in to the Web interface of the device. Context To configure the domain name, perform the following steps:
Steps 1. On the Application tab, select DNS Service. By default, Domain Name is selected, as shown in Figure 6-13. SJ-20110718111034-001|2011-07-18 (R1.0) ZTE Proprietary and Confidential 6-13 ZXA10 F660 User Manual Figure 6-13 Domain Name 2. Set Domain Name. 3. Click Submit to finish the configuration. Click Cancel to cancel the configuration. End of Steps Result The domain name is configured. 6.4.2 Configuring Host Name Short Description Perform this procedure to configure the host name. Prerequisites The user has logged in to the Web interface of the device. Context To configure the host name, perform the following steps:
Steps 1. On the Application tab, select DNS Service, and then select Hosts, as shown in Figure 6-14. SJ-20110718111034-001|2011-07-18 (R1.0) ZTE Proprietary and Confidential 6-14 Figure 6-14 Host Name Chapter 6 Service Configuration 2. Set Host Name and IP Address, as shown in Figure 6-15. Figure 6-15 Host Name Configuration 3. Click Add to finish the configuration, as shown in Figure 6-16. Click Modify to modify the configuration. Click Delete to delete the configuration. SJ-20110718111034-001|2011-07-18 (R1.0) ZTE Proprietary and Confidential 6-15 ZXA10 F660 User Manual Figure 6-16 Host Name Configuration Completed End of Steps Result The host name is configured. 6.5 QoS Configuration This topic includes the following:
l Configuring Basic QoS Parameters l Configuring QoS Rule l Configuring QoS Rule Type l Configuring QoS Local Application l Configuring QoS Queue Management l Configuring QoS Ingress Rate Limit 6.5.1 Configuring Basic QoS Parameters Short Description Perform this procedure to configure the basic QoS parameters. Prerequisites The user has logged in to the Web interface of the device. Context To configure the basic QoS parameters, perform the following steps:
SJ-20110718111034-001|2011-07-18 (R1.0) ZTE Proprietary and Confidential 6-16 Steps 1. On the Application tab, select QoS. By default, Basic is selected, as shown in Figure Chapter 6 Service Configuration 6-17. Figure 6-17 Basic QoS Parameters Note:
The template index is enabled immediately after changed. 2. Configure the basic QoS parameters, as shown in Figure 6-18. SJ-20110718111034-001|2011-07-18 (R1.0) ZTE Proprietary and Confidential 6-17 ZXA10 F660 User Manual Figure 6-18 Basic QoS Parameter Configuration Table 6-7 lists the basic QoS parameters. Table 6-7 Basic QoS Parameters Parameter Template Index Enable QoS The Total Upstream Bandwidth Description Template index To enable or disable the QoS function Upstream bandwidth through the WAN port Range: 8000 104857600 bps Queue Scheduling Algorithm Queue scheduling algorithm Range: SP and DWRR DWRR bandwidth locked To lock DWRR bandwidth (when the queue scheduling algorithm is DWRR) Enable DSCP Re-marking To enable or disable DSCP remarking 802.1P Re-mark Model To enable or disable the 802.1p remarking mode Range: disable, transparent transmission, and enable 3. Click Submit to finish the configuration. Click Cancel to cancel the configuration. End of Steps Result The basic QoS parameters are configured. SJ-20110718111034-001|2011-07-18 (R1.0) ZTE Proprietary and Confidential 6-18 Chapter 6 Service Configuration 6.5.2 Configuring QoS Rule Short Description Perform this procedure to configure the QoS rule. Prerequisites The user has logged in to the Web interface of the device. Context To configure the QoS rule, perform the following steps:
Steps 1. On the Application tab, select QoS, and then select Rule, as shown in Figure 6-19. Figure 6-19 QoS Rule 2. Configure the QoS rule parameters, as shown in Figure 6-20. SJ-20110718111034-001|2011-07-18 (R1.0) ZTE Proprietary and Confidential 6-19 ZXA10 F660 User Manual Figure 6-20 QoS Rule Configuration Table 6-8 lists the parameters for QoS rule configuration. Table 6-8 Parameters for QoS Rule Configuration Parameter 802.1p Re-marking DSCP Re-marking Description 802.1P remarking DSCP remarking CAR(Committed Access Rate) Ingress rate limit rule Queue Congestion management queue 3. Click Submit to finish the configuration. Click Cancel to cancel the configuration. End of Steps Result The QoS rule is configured. 6.5.3 Configuring QoS Rule Type Short Description Perform this procedure to configure the QoS rule type. Prerequisites The user has logged in to the Web interface of the device. SJ-20110718111034-001|2011-07-18 (R1.0) ZTE Proprietary and Confidential 6-20 Chapter 6 Service Configuration Context To configure the QoS rule type, perform the following steps:
Steps 1. On the Application tab, select QoS, and then select Rule Type, as shown in Figure 6-21. Figure 6-21 Rule Type 2. Configure the QoS rule type parameters, as shown in . Table 6-9 lists the parameters for QoS rule type Configuration Table 6-9 Parameters for QoS Rule Type Configuration Parameter Description Classification Rules Classification rules Protocol Type Minimum Maximum Protocol Range: TCP, UDP, ICMP, and RTP Type Minimum value Maximum value 3. Click Add to finish the configuration, as shown in Figure 6-22. SJ-20110718111034-001|2011-07-18 (R1.0) ZTE Proprietary and Confidential 6-21 ZXA10 F660 User Manual Figure 6-22 Rule Type Configuration Completed 4. Click Modify to modify the configuration. Click Delete to delete the configuration. End of Steps Result The QoS rule type is configured. 6.5.4 Configuring QoS Local Application Short Description Perform this procedure to configure the QoS local application. Prerequisites The user has logged in to the Web interface of the device. Context To configure the QoS local application, perform the following steps:
Steps 1. On the Application tab, select QoS, and then select Local Application, as shown in Figure 6-23. SJ-20110718111034-001|2011-07-18 (R1.0) ZTE Proprietary and Confidential 6-22 Figure 6-23 Local Application Chapter 6 Service Configuration 2. In the Queue drop-down list, select a queue number. Note:
At present, only the TR069 service mode is supported. 3. Click Submit to finish the configuration. Click Cancel to cancel the configuration. End of Steps Result The QoS local application is configured. 6.5.5 Configuring QoS Queue Management Short Description Perform this procedure to configure QoS queue management. Prerequisites The user has logged in to the Web interface of the device. Context To configure QoS queue management, perform the following steps:
SJ-20110718111034-001|2011-07-18 (R1.0) ZTE Proprietary and Confidential 6-23 ZXA10 F660 User Manual Steps 1. On the Application tab, select QoS, and then select Queue Management, as shown in Figure 6-24. Figure 6-24 Queue Management 2. Click the Modify icons in the table to modify the queue management functions. 3. Select or clear Enable to enable or disable the queue management function. 4. Click Modify to finish the configuration. Note:
1 indicates enabled and 0 indicates disabled. When the congestion management algorithm is DWRR, the queue weight needs to be configured. Weight refers to the ratio of the data flow passing through the queues to the total data flow. End of Steps Result QoS queue management is configured. SJ-20110718111034-001|2011-07-18 (R1.0) ZTE Proprietary and Confidential 6-24 6.5.6 Configuring QoS Ingress Rate Limit Chapter 6 Service Configuration Short Description Perform this procedure to configure the QoS ingress rate limit. Prerequisites The user has logged in to the Web interface of the device. Context To configure the QoS ingress rate limit, perform the following steps:
Steps 1. On the Application tab, select QoS, and then select Ingress Rate Limit, as shown in Figure 6-25. Figure 6-25 Ingress Rate Limit 2. Configure the parameters for QoS ingress rate limit, as shown in Figure 6-26. SJ-20110718111034-001|2011-07-18 (R1.0) ZTE Proprietary and Confidential 6-25 ZXA10 F660 User Manual Figure 6-26 Ingress Rate Limit Configuration Table 6-10 lists the parameters for ingress rate limit configuration. Table 6-10 Parameters for Ingress Rate Limit Configuration Parameter Visiting Interface Enable Rate Description User interface for the rate limit rule To enable the ingress rate limit function Limit rate 8000 bps 104857600 bps 3. Click Add to finish the configuration. Click Modify to modify the configuration. Click Delete to delete the configuration. End of Steps Result The QoS ingress rate limit is configured. 6.6 Configuring SNTP Client Short Description Perform this procedure to configure the SNTP client. Prerequisites The user has logged in to the Web interface of the device. SJ-20110718111034-001|2011-07-18 (R1.0) ZTE Proprietary and Confidential 6-26 Chapter 6 Service Configuration Context To configure the SNTP client, perform the following steps:
Steps 1. On the Application tab, select SNTP, as shown in Figure 6-27. Figure 6-27 SNTP 2. Configure the SNTP parameters, as shown in Figure 6-27. Figure 6-28 SNTP Configuration Table 6-11 lists the SNTP parameters. Table 6-11 SNTP Parameters Parameter Time Zone Primary NTP Server Address Description Time zone where the subscriber is located IP address of the primary NTP server 6-27 SJ-20110718111034-001|2011-07-18 (R1.0) ZTE Proprietary and Confidential ZXA10 F660 User Manual Parameter Description Secondary NTP Server Address Poll Interval IP address of the secondary NTP server Interval for server synchronization Unit: second 3. Click Submit to finish the configuration. Click Cancel to cancel the configuration. End of Steps Result The SNTP client is configured. 6.7 IGMP Configuration This topic includes the following:
l Configuring Basic IGMP Parameters l Configuring Multicast VLAN l Configuring Multicast MAC Limit l Configuring MVLAN Tag Strip 6.7.1 Configuring Basic IGMP Parameters Short Description Perform this procedure to configure the basic IGMP parameters. Prerequisites The user has logged in to the Web interface of the device. Context To configure the basic IGMP parameters, perform the following steps:
Steps 1. On the Application tab, select IGMP. By default, Basic is selected, as shown in Figure 6-29. SJ-20110718111034-001|2011-07-18 (R1.0) ZTE Proprietary and Confidential 6-28 Figure 6-29 Basic IGMP Configuration Chapter 6 Service Configuration 2. IGMP Mode includes IGMP Snooping, indicates to disable the IGMP mode configuration. l Configure IGMP Snooping. IGMP Proxy, and Disabled. Disabled From the IGMP Mode drop-down list, select IGMP Snooping, as shown in Figure 6-30. Figure 6-30 IGMP Snooping Configuration Table 6-12 lists the parameters for IGMP snooping configuration. Table 6-12 Parameters for IGMP Snooping Configuration Parameter IGMP Mode Description IGMP mode Multicast MAC Aging Time Aging time of the multicast address 6-29 SJ-20110718111034-001|2011-07-18 (R1.0) ZTE Proprietary and Confidential ZXA10 F660 User Manual Parameter Non-Fast-Leave Description To enable the Non-Fast-Leave mode l Configure IGMP Proxy. From the IGMP Mode drop-down list, select IGMP Proxy, as shown in Figure 6-31. Figure 6-31 IGMP Proxy Configuration Table 6-13 lists the parameters for IGMP proxy configuration. Table 6-13 Parameters for IGMP Proxy Configuration Parameter IGMP Mode Description IGMP mode Multicast MAC Aging Time Aging time of the multicast address Report Time Periodical report time of multicast messages Note:
ZXA10 F660 periodically reports the IGMP member report messages to the upper-layer multicast router according to the Report Time. 3. Click Submit to finish the configuration. Click Cancel to cancel the configuration. End of Steps SJ-20110718111034-001|2011-07-18 (R1.0) ZTE Proprietary and Confidential 6-30 Chapter 6 Service Configuration Result The basic IGMP parameters are configured. 6.7.2 Configuring Multicast VLAN Short Description Perform this procedure to configure the multicast VLAN. Prerequisites The user has logged in to the Web interface of the device. Context To configure the multicast VLAN, perform the following steps:
Steps 1. On the Application tab, select IGMP, and then select Multicast VLAN, as shown in Figure 6-32. Figure 6-32 Multicast VLAN 2. Configure the multicast VLAN parameters, as shown in Figure 6-33. SJ-20110718111034-001|2011-07-18 (R1.0) ZTE Proprietary and Confidential 6-31 ZXA10 F660 User Manual Figure 6-33 Multicast VLAN Configuration Table 6-14 lists the parameters for the multicast VLAN configuration. Table 6-14 Parameters for Multicast VLAN Configuration Parameter IGMP Mode Description IGMP mode, configured on the Basic tab Enable Multicast VLAN To enable the multicast VLAN function Enable Translation To enable multicast VLAN translation Multicast VLAN New VLAN Interface Name To create a multicast VLAN Multicast VLAN ID LAN interface to be added to the multicast VLAN 3. Click Submit to finish the configuration. Click Cancel to cancel the configuration. End of Steps Result The multicast VLAN is configured. 6.7.3 Configuring Multicast MAC Limit Short Description Perform this procedure to configure multicast MAC limit. Prerequisites The user has logged in to the Web interface of the device. 6-32 SJ-20110718111034-001|2011-07-18 (R1.0) ZTE Proprietary and Confidential Chapter 6 Service Configuration Context The multicast MAC limit function can be configured only when the IGMP mode is IGMP Snooping. IGMP Proxy does not support this function. To configure multicast MAC limit, perform the following steps:
Steps 1. On the Application tab, select IGMP, and then select Multicast MAC Limit, as shown in Figure 6-34. Figure 6-34 Multicast MAC Limit 2. Click the Modify icon to configure the multicast MAC limit, as shown in Figure 6-35. Figure 6-35 Multicast MAC Limit Configuration Table 6-15 lists the parameters for the multicast MAC limit configuration. SJ-20110718111034-001|2011-07-18 (R1.0) ZTE Proprietary and Confidential 6-33 ZXA10 F660 User Manual Table 6-15 Parameters for Multicast MAC Limit Configuration Parameter Description Multicast MAC Address Limit Maximum multicast addresses for each LAN port Range: 0 256 3. Click Modify. End of Steps Result Multicast MAC limit is configured. 6.7.4 Configuring MVLAN Tag Strip Short Description Perform this procedure to configure MVLAN tag strip. Prerequisites The user has logged in to the Web interface of the device. Context The MVLAN tag strip function can be configured only when the IGMP mode is IGMP Snooping. IGMP Proxy does not support this function. To configure MVLAN tag strip, perform the following steps:
Steps 1. On the Application tab, select IGMP, and then select Tag Stripe, as shown in Figure 6-36. SJ-20110718111034-001|2011-07-18 (R1.0) ZTE Proprietary and Confidential 6-34 Figure 6-36 MVLAN Tag Strip Chapter 6 Service Configuration 2. Click the Modify icon to configure MVLAN tag strip, as shown in Figure 6-37. Figure 6-37 MVLAN Tag Strip Configuration Table 6-16 lists the parameters for MVLAN tag strip configuration. Table 6-16 Parameters for MVLAN Tag Strip Configuration Parameter Description Enable Tag Stripe To enable the MVLAN tag strip function 3. Click Modify. End of Steps Result MVLAN tag strip is configured. 6-35 SJ-20110718111034-001|2011-07-18 (R1.0) ZTE Proprietary and Confidential ZXA10 F660 User Manual 6.8 Configuring FTP Application Short Description Perform this procedure to configure FTP application. Prerequisites The user has logged in to the Web interface of the device. Context To configure FTP application, perform the following steps:
Steps 1. On the Application tab, select FTP Application, as shown in Figure 6-38. Figure 6-38 FTP Server 2. Configure the FTP server parameters, as shown in Figure 6-39. Figure 6-39 FTP Server Configuration SJ-20110718111034-001|2011-07-18 (R1.0) ZTE Proprietary and Confidential 6-36 Chapter 6 Service Configuration Table 6-17 lists the FTP server parameters. Table 6-17 FTP Server Parameters Parameter Description Enable FTP Server To enable the FTP server FTP Username FTP Password FTP login user name FTP login password 3. Click Submit to finish the configuration. Click Cancel to cancel the configuration. End of Steps Result FTP application is configured. SJ-20110718111034-001|2011-07-18 (R1.0) ZTE Proprietary and Confidential 6-37 ZXA10 F660 User Manual This page intentionally left blank. SJ-20110718111034-001|2011-07-18 (R1.0) ZTE Proprietary and Confidential 6-38 Chapter 7 Device Management Table of Contents TR069 Configuration ..................................................................................................7-1 User Management......................................................................................................7-4 Device Management ..................................................................................................7-5 Log Management .......................................................................................................7-9 Ping Diagnosis .........................................................................................................7-10 7.1 TR069 Configuration This topic includes the following:
l Configuring Basic TR069 Parameters l Importing TRO69 Certificate 7.1.1 Configuring Basic TR069 Parameters Short Description Perform this procedure to configure the basic TR069 parameters. Prerequisites The user has logged in to the Web interface of the device. Context To configure the basic TR069 parameters, perform the following steps:
Steps 1. On the Administration tab, select TR-069. By default, Basic is selected, as shown in Figure 7-1. SJ-20110718111034-001|2011-07-18 (R1.0) ZTE Proprietary and Confidential 7-1 ZXA10 F660 User Manual Figure 7-1 Basic TR069 Parameters 2. Configure the basic TR069 parameters, as shown in Figure 7-2. Figure 7-2 Basic TR069 Parameter Configuration Table 7-1 lists the basic TR069 parameters. Table 7-1 Basic TR069 Parameters Parameter WAN Connection ACS URL Username Password Description WAN-side connection interface Network server URL User name Password Connection Request URL Connection request URL Connection Request Username Connection request user name 7-2 SJ-20110718111034-001|2011-07-18 (R1.0) ZTE Proprietary and Confidential Chapter 7 Device Management Parameter Description Connection Request Password Connection request password Enable Periodic Inform Periodic Inform Interval Enable Certificate To enable periodic report Periodic report interval To enable certificate 3. Click Submit to finish the configuration. Click Cancel to cancel the configuration. End of Steps Result The basic TR069 parameters are configured. 7.1.2 Importing TRO69 Certificate Short Description Perform this procedure to import the TR069 certificate. Prerequisites The user has logged in to the Web interface of the device. Context To import the TR069 certificate, perform the following steps:
Steps 1. On the Administration tab, select TR-069, and then select Certificate, as shown in Figure 7-3. Figure 7-3 TRO69 Certificate 2. Click Browse to select the certificate file. SJ-20110718111034-001|2011-07-18 (R1.0) ZTE Proprietary and Confidential 7-3 ZXA10 F660 User Manual 3. Click Import Certificate to import the file. End of Steps Result The TR069 certificate is imported. 7.2 User Management Short Description Perform this procedure to manage users. Prerequisites The user has logged in to the Web interface of the device. Context To manage users, perform the following steps:
Steps 1. On the Administration tab, select User Management, as shown in Figure 7-4. Figure 7-4 User Management 2. Configure the user management parameters. Note:
User Right includes Administrator and User. SJ-20110718111034-001|2011-07-18 (R1.0) ZTE Proprietary and Confidential 7-4 3. Click Submit to finish the configuration. Click Cancel to cancel the configuration. Chapter 7 Device Management End of Steps Result User management is complete. 7.3 Device Management This topic includes the following:
l System Management l Software Upgrade l Configuration Management 7.3.1 System Management Short Description Perform this procedure to manage the system. Prerequisites The user has logged in to the Web interface of the device. Context To manage the system, perform the following steps:
Steps 1. On the Administration tab, select System Management, as shown in Figure 7-5. Figure 7-5 System Management 2. Click Reboot to reboot the device. 7-5 SJ-20110718111034-001|2011-07-18 (R1.0) ZTE Proprietary and Confidential ZXA10 F660 User Manual 3. Click Restore Default to restore the system to the factory default settings. End of Steps Result System management is complete. 7.3.2 Software Upgrade Short Description Perform this procedure to upgrade the software. Prerequisites The user has logged in to the Web interface of the device. Context Caution!
Generally, the software is upgraded by the ZTE CORPORATION engineers. If the user wants to upgrade the software, contact the local office of ZTE CORPORATION to obtain the latest software version. To upgrade the software, perform the following steps:
Steps 1. On the Administration tab, select System Management, and then select Software Upgrade, as shown in Figure 7-6. Figure 7-6 Software Upgrade 2. Click Browse to select the software version. 3. Click Upgrade to upgrade the software, as shown in Figure 7-7. 7-6 SJ-20110718111034-001|2011-07-18 (R1.0) ZTE Proprietary and Confidential Figure 7-7 Upgrading Software Chapter 7 Device Management Figure 7-8 shows the result of software upgrade. Figure 7-8 Software Upgrade Completed Note:
During the upgrade process, the device cannot be powered off; otherwise, it may be damaged. During the upgrade process, the system prompts a message. After the upgrade is complete, the system returns to the login interface. End of Steps Result The software is upgraded. SJ-20110718111034-001|2011-07-18 (R1.0) ZTE Proprietary and Confidential 7-7 ZXA10 F660 User Manual 7.3.3 Configuration Management Short Description Perform this procedure to manage the device configuration. Prerequisites The user has logged in to the Web interface of the device. Context To manage the device configuration, perform the following steps:
Steps 1. On the Administration tab, select System Management, and then select Configuration Management, as shown in Figure 7-9. Figure 7-9 Configuration Management 2. Click Backup Configuration to back up the existing configuration file. 3. Click Browse to select the backed up configuration file. 4. Click Restore Configuration to restore the backed up configuration file, as shown in Figure 7-10. SJ-20110718111034-001|2011-07-18 (R1.0) ZTE Proprietary and Confidential 7-8 Figure 7-10 Importing File Completed Chapter 7 Device Management End of Steps Result The configuration management is complete. 7.4 Log Management Short Description Perform this procedure to manage logs. Prerequisites The user has logged in to the Web interface of the device. Context To manage logs, perform the following steps:
Steps 1. On the Administration tab, select Log Management, as shown in Figure 7-11. SJ-20110718111034-001|2011-07-18 (R1.0) ZTE Proprietary and Confidential 7-9 ZXA10 F660 User Manual Figure 7-11 Log Management 2. Configure the log management parameters, as listed in Table 7-2. Table 7-2 Log Management Parameters Parameter Log Enable Log Level Description Whether to enable the log server Log level, including Debug, Informational, Notice, Warning, Error, Critical, Alert, and Emergency When Log Level is configured, only the logs above the specified level are saved. 3. Click Refresh to display the latest 20 logs. 4. Click Clear Log to clear the current log records. 5. Click Submit to finish the configuration. Click Cancel to cancel the configuration. End of Steps Result Log management is complete. 7.5 Ping Diagnosis Short Description Perform this procedure to diagnose ping connection. Prerequisites The user has logged in to the Web interface of the device. 7-10 SJ-20110718111034-001|2011-07-18 (R1.0) ZTE Proprietary and Confidential Chapter 7 Device Management Context To diagnose ping connection, perform the following steps:
Steps 1. On the Administration tab, select Diagnosis, as shown in Figure 7-12. Figure 7-12 Ping Diagnosis In Input IP Address or host name , enter the host IP address or host name. 2. 3. Click Submit to diagnose the connection, as shown in Figure 7-13. Click Cancel to cancel the configuration. Figure 7-13 Ping Diagnosis Result End of Steps Result Ping diagnosis is complete. SJ-20110718111034-001|2011-07-18 (R1.0) ZTE Proprietary and Confidential 7-11 ZXA10 F660 User Manual This page intentionally left blank. SJ-20110718111034-001|2011-07-18 (R1.0) ZTE Proprietary and Confidential 7-12 Chapter 8 FAQ Table of Contents FAQ ...........................................................................................................................8-1 8.1 FAQ How Can I set TCP/IP on the Computer Connected to the Device?
The default device IP address is 192.168.1.1. Therefore, set the computer IP address to 192.168.1.2 192.168.1.254 and the subnet mask to 255.255.255.0. How Can I Ensure That My Computer Is Successfully Connected to the Device?
On the command line interface, carry out the ping 192.168.1.1 command. If the connection fails, the interface prompts connection timeout. How Can I Set the Device Through the Web Interface?
Make sure that the computer is connected to the device. Then open the Internet Explorer and enter http://192.168.1.1 on the address bar to access the Web interface of the device. The default user name and password are admin. How Can I Restore the Device to the Factory Default Settings?
Press the RST reset button for more than 10 seconds to reboot the device. Then the device is restored to the factory default settings. Why Is the PON Link Indicator Always OFF?
If the PON link indicator is always OFF, it indicates that the PON link is not successfully set up. Make sure that the fiber is correctly connected with the PON port and the subscriber device. Make sure that the tail fiber is straight and is in good condition. Why Does the Device Fail to Make a Call?
Check whether the telephone cable is correctly connected to the POTS1 or POTS2 port. Then access the Web interface of the device. Click the Application tab to check the VoIP configuration. If the VoIP configuration is correct and the telephone cable is correctly connected, but the call still cannot be made, contact the service provider. SJ-20110718111034-001|2011-07-18 (R1.0) ZTE Proprietary and Confidential 8-1 ZXA10 F660 User Manual This page intentionally left blank. SJ-20110718111034-001|2011-07-18 (R1.0) ZTE Proprietary and Confidential 8-2 Glossary CATV
- CAble TeleVision CNG
- Comfort Noise Generation DC
- Direct Current DDNS
- Dynamic Domain Name Server DHCP
- Dynamic Host Configuration Protocol DMZ
- Demilitarized Zone DNAT
- Destination Network Address Translation DNS
- Domain Name Server DSCP
- Differentiated Services Code Point DSL
- Digital Subscriber Line DTMF
- Dual-ToneMulti-Frequency DWRR
- Deficit Weighted Round Robin FTP
- File Transfer Protocol FTTH
- Fiber to the Home GE
- Gigabit Ethernet GPON
- Gigabit Passive Optical Network HTTP
- Hypertext Transfer Protocol I ZXA10 F660 User Manual ICMP
- Internet Control Message Protocol IEEE
- Institute of Electrical and Electronics Engineers IGMP
- Internet Group Management Protocol IP
- Internet Protocol IPTV
- Internet Protocol Television ISP
- Internet Service Provider ITU
- International Telecommunications Union LAN
- Local Area Network MAC
- Medium Access Control NAT
- Network Address Translation NTP
- Network Time Protocol OLT
- Optical Line Terminal OMCI
- ONT Management Control Interface ONT
- Optical Network Terminal ONU
- Optical Network Unit PON
- Passive Optical Network POTS
- Plain Old Telephone Service PPPoE
- Point to Point Protocol over Ethernet QoS
- Quality of Service II Glossary RF
- Radio Frequency RTP
- Real-time Transport Protocol SIP
- Session Initiation Protocol SNTP
- Simple Network Time Protocol SP
- Strict Priority SS
- Soft Switch TCP
- Transfer Control Protocol TCP/IP
- Transfer Control Protocol/Internet Protocol UDP
- User Datagram Protocol URL
- UniformResource Locator VAD
- Voice Activity Detectors VLAN
- Virtual Local Area Network VoIP
- Voice over Internet Protocol WAN
- Wide Area Network WEP
- Wired Equivalent Privacy WLAN
- Wireless Local Area Network WPA
- Wi-Fi Protected Access Wi-Fi
- Wireless Fidelity III
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2011-10-10 | JBP - Part 15 Class B Computing Device Peripheral | Original Equipment | |
2 | 2422 ~ 2452 | DTS - Digital Transmission System |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 2 | Effective |
2011-10-10
|
||||
1 2 | Applicant's complete, legal business name |
ZTE Corporation
|
||||
1 2 | FCC Registration Number (FRN) |
0009043175
|
||||
1 2 | Physical Address |
ZTE Plaza, Hi-tech Park, Nanshan District
|
||||
1 2 |
Shenzhen, Guangdong, N/A 518057
|
|||||
1 2 |
China
|
|||||
app s | TCB Information | |||||
1 2 | TCB Application Email Address |
T******@TIMCOENGR.COM
|
||||
1 2 | TCB Scope |
A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
|
||||
1 2 |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
|||||
app s | FCC ID | |||||
1 2 | Grantee Code |
Q78
|
||||
1 2 | Equipment Product Code |
ZXA10F660
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 2 | Name |
Y******** X********
|
||||
1 2 | Title |
Product Certification Manager
|
||||
1 2 | Telephone Number |
0086-********
|
||||
1 2 | Fax Number |
0086-********
|
||||
1 2 |
x******@zte.com.cn
|
|||||
app s | Technical Contact | |||||
n/a | ||||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 2 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 2 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 2 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 2 | Equipment Class | JBP - Part 15 Class B Computing Device Peripheral | ||||
1 2 | DTS - Digital Transmission System | |||||
1 2 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | GPON ONT | ||||
1 2 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 2 | Modular Equipment Type | Does not apply | ||||
1 2 | Purpose / Application is for | Original Equipment | ||||
1 2 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | Yes | ||||
1 2 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 2 | Grant Comments | Power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Device is a WLAN operating in 2x2 Spatial Multiplexing/Cyclic Delay Diversity MIMO configurations and single-stream legacy modes as described in this filing. When operating in 802.11n, 40 MHz mode, the operating frequency segment is limited to 2422 to 2452 MHz. | ||||
1 2 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 2 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 2 | Firm Name |
Shanghai Morlab Communications Technology Co.,Ltd
|
||||
1 2 |
Shenzhen Morlab Communications Technology Co.,Ltd
|
|||||
1 2 | Name |
z**** j******
|
||||
1 2 |
S**** L****
|
|||||
1 2 | Telephone Number |
86021******** Extension:
|
||||
1 2 |
0086-********
|
|||||
1 2 | Fax Number |
86021********
|
||||
1 2 |
0086-********
|
|||||
1 2 |
z******@morlab.cn
|
|||||
1 2 |
s******@morlab.cn
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15B | CC | ||||||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
2 | 1 | 15C | CC MO | 2412 | 2462 | 0.319 | |||||||||||||||||||||||||||||||||||
2 | 2 | 15C | CC MO | 2422 | 2452 | 0.397 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC