ZXHN F680 GPON ONT User Manual Manual No: SJ-20141223134319-006 Edition Time: 2015-10-25(R1.0) LEGAL INFORMATION Copyright 2015 ZTE CORPORATION. The contents of this document are protected by copyright laws and in-
ternational treaties. Any reproduction or distribution of this document or any portion of this document, in any form by any means, without the prior written consent of ZTE CORPORATION is prohibited. Additionally, the contents of this document are protected by contractual confidentiality obli-
gations. All company, brand and product names are trade or service marks, or registered trade or service marks, of ZTE CORPORATION or of their re-
spective owners. This document is provided as is, and all express, implied, or statutory warranties, representations or conditions are disclaimed, including without limitation any implied warranty of merchantability, fitness for a particular purpose, title or non-infringement. ZTE CORPORATION and its licensors shall not be liable for damages resulting from the use of or reliance on the information contained herein. ZTE CORPORATION or its licensors may have current or pending intel-
lectual property rights or applications covering the subject matter of this document. Except as expressly provided in any written license between ZTE CORPORATION and its licensee, the user of this document shall not acquire any license to the subject matter herein. ZTE CORPORATION reserves the right to upgrade or make technical change to this product without further notice. Users may visit ZTE technical support website http://support.zte.com.cn to inquire related information. The ultimate right to interpret this product resides in ZTE CORPORATION. 1 Safety Precautions Usage Cautions Read all the safety cautions carefully before using the device. Only use the accessories included in the package, such as power supply adapter. Do not extend the power cord, otherwise the device will not work. The power supply voltage must meet the requirements of the device input voltage (The voltage fluctuation range is less than 10%). Keep the power plug clean and dry to prevent any risk of electric shock or other dangers. Disconnect all the cables during a lightning storm to prevent the device from damage. Power off and unplug the power plug when the device is not in use for a long time. Do not attempt to open the covers of the device. when the device is powered ON. It is dangerous to do so Do not directly stare at the optical interface to prevent any eye injuries. Power off and stop using the device under the conditions such as, abnormal sound, smoke, and strange smell. Contact the service provider for mainte-
nance if the device is faulty. Note:
The users should read the usage cautions above carefully and will be respon-
sible for any incident resulting from the violation of the above cautions. Environment Requirements Ensure proper ventilation to the device. Place the device away from direct sunlight and never spill any liquid on the device. Do not place any object on the device to prevent any deformation or damage to the device. Do not place the device near any source of heat or water. Keep the device away from any household appliances with strong magnetic or electric fields, such as microwave oven and refrigerator. Cleaning Requirements Before cleaning, power off the device, and unplug all the cables connected to the device, such as power cable, optical fiber, and Ethernet cable. Do not use any liquid or spray to clean the device. Use a soft dry cloth. Environment Protection Do not dispose the device or battery improperly. Observe the local regulations about the equipment disposal or treatment. 2 Package Content Please make sure the ZXHN F680 package contains the items, refer to Table 2-1. Table 2-1 Package Contents Item Name Quantity ZXHN F680 unit One AC-DC power supply adapter One RJ-45 Ethernet cable One Note:
A socket outlet that is installed near equipment and that shall be easily acces-
sible. One ZXHN F680 GPON ONT User Manual is delivered with the product. If any of the items included in the package is incorrect, lost or damaged, please contact your service provider. If you need to replace the product, please keep the package and all the items in good condition. 3 Indicator Figure 3-1 shows the indicators on the front panel of the ZXHN F680. Figure 3-1 Indicators of the ZXHN F680 Table 3-1 describes the indicators on the front panel of the ZXHN F680 . Table 3-1 Indicators on the Front Panel Indicator Status Description Off The device is powered off. Power Solid green Off The device is powered on. The ONT registration fails or the system is not powered on. The ONT registration is successful. PON Solid green Flashing green The ONT is being registered. LOS Off Solid red Flashing red Off Internet Solid green Phone1 Phone2 Flashing green Off Solid green Flashing green The ONT received optical power is normal. The optical transmitter of the PON interface is powered off. The received optical power is less than the optical receiver sensitivity, or the device is downloading a program package. The device is not powered on, there is no WAN connection with Internet properties configured, or the WAN configuration is not effective. There is a WAN connection with Internet properties configured and the WAN configuration is effective. Data is being transmitted. The device is not powered on or the voice service cannot be registered on the softswitch. The voice service is successfully registered on the softswitch, but there is no service traffic. There is voice service traffic. Indicator Status Off LAN1LAN4 Solid green Flashing green Off 2.4GHz Solid green Flashing green Off 5GHz Solid green Description The device is not powered on or the network link is not established. The network link has been established but no data is being transmitted or received. Data is being transmitted or received. The device is not powered on or the wireless interface is disabled. The wireless interface is enabled. Data is being transmitted. The device is not powered on or the wireless interface is disabled. The wireless interface is enabled. Flashing green Data is being transmitted. WPS Yellow Green Red Off BBU Solid green Flashing green Off USB1USB2 Solid green Flashing green 4 Interface Negotiation is in progress. Negotiation is successful. Session overlapping detection is being implemented or negotiation fails. There is no standby power supply or the standby power supply fails. The standby power supply is used and operates properly. The standby power supply is used but operates improperly. For example, undervoltage occurs. The device is not powered on or the USB interface is not connected. The USB interface is connected and operating in host mode, but no data is being transmitted. Data is being transmitted on the interface. Figure 4-1 shows the interfaces and buttons on the side panel of the ZXHN F680. Figure 4-1 Interfaces and Buttons on the Side Panel Table 4-1 describes the interfaces and buttons on the side panel of the ZXHN F680. Table 4-1 Descriptions of the Interfaces and Buttons on the Side Panel Interface/Button Description On/Off WPS Wi-Fi USB2 Power switch. Wi-Fi protection button. To enable the Wi-Fi protection function, press this button, so that users can access the network without entering their passwords. WLAN button for enabling or disabling the WLAN function. Standard USB 3.0 interface, connected to a USB storage device for file sharing, fast backup, and data restoration. Figure 4-2 shows the interfaces on the back panel of the ZXHN F680. Figure 4-2 Interfaces on the Back Panel Table 4-2 describes the interfaces on the back panel of the ZXHN F680. Table 4-2 Descriptions of the Interfaces on the Back Panel Interface Description Power USB1 Reset 12 V DC power connector. Standard USB 2.0 interface, connected to a USB storage device for file sharing, fast backup, and data restoration. Reset button, when the power is on, use a needle to press the button for over 5 seconds to restore the default settings. RJ-45 Ethernet interface. LAN1 LAN4 Phone1Phone2 RJ-11 telephone interface, connected to the telephone with RJ-11 telephone cable. Interface Description PON BBU PON interface. Standby power supply interface, connected to a standby power supply through a dedicated cable. 5 Product Features Interfaces GPON interface:
G.984.1G.984.5 standards GPON standard, SC/APC, comply with ITU Ethernet interface: auto-sensing RJ-45 interface in compliance with IEEE 802.3 and IEEE 802.3u. Phone interface: RJ-11 WLAN interface: complies with IEEE 802.11ac, IEEE 802.11b, IEEE 802.11g and IEEE 802.11n. USB interface: standard USB 2.0 and USB 3.0 interface. Technical Features Broadband service access: Connected to Internet through the GPON access method. Ethernet service access: Provides Ethernet interfaces, connected to the Eth-
ernet devices, such as the user PC. Provides the Internet access and IPTV services. Phone service access: Supports SIP protocol. WLAN: Users can connect to the ZXHN F680 through WLAN. Data sharing, backup, and restoration: provides the USB 2.0 and USB 3.0 interface connected to a USB storage device for file sharing, fast backup, and data restoration. Security: Provides multi-level authentication based on the device, user and service, and provides the data channel encryption for safety. QoS: Provides QoS services meeting the requirements of various services for the local devices and network Network management: Provides multi-mode network management. 6 Technical Specification For the technical specifications of the ZXHN F680 , refer to Table 6-1. Table 6-1 Technical Specifications Item Dimension Specification 220 mm (W) 35 mm (D) 310 mm (H)(Antenna included) Rated current 2 A Item Specification Rated voltage 12 V DC Operation temperature 0 ~ 40 Operation humidity 5% ~ 95%
7 Cable Connection Figure 7-1 shows the devices that are connected to the ZXHN F680. Figure 7-1 Entire Connection Note:
The USB2 interface is on the side of the ZXHN F680. Verify that the cable connections are correct, and press the On/Off button. After the power indicator is lit and other indicators operate properly, services of the carrier can be used. 8 Troubleshooting The Power indicator on the front panel is off after the power button is pressed. The power adapter is not correctly connected to the device. Be sure to use the power adapter supplied with the device. The LOS indicator is flashing red or solid red after the device is powered on. The optical fiber is not correctly connected to the ONT PON interface. The optical fiber is broken or damaged. If the indicator is solid red or keeps flashing, please contact the service provider for maintenance. The PON indicator on the front panel is off or flashing green after the device is powered on. The GPON link is not established. The ONT is not registered. Please contact the service provider for help. The green LAN indicator on the front panel is off after the device is powered on. The corresponding LAN link is not established. The Ethernet cable is not correctly connected to the LAN interface. The network device connected to the LAN interface is not powered on. The Phone indicator on the front panel is off after the device is powered on. The telephone function is abnormal. Please contact the service provider for help. 9 FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guar-
antee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. To assure continued compliance, any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. (Example- use only shielded interface cables when connecting to computer or peripheral devices). FCC Radiation Exposure Statement This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body. This equipment complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation. Caution!
Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.