FCC ID: Q78-Z700 GSM/WCDMA/LTE CPE

User Guide AT&T Blender Welcome to AT&T Thank you for purchasing an AT&T Blender device. To get the most from your new device, check out our interactive tutorials at att.com/tutorials. Please select Manufacturer: AT&T and Model: Blender (WF700) from the drop down menus. Welcome i Contents Getting Started ............................................................................................................................................1 In the Box ....................................................................................................................................................1 Getting to Know Your Device .......................................................................................................... 2 How It Works ........................................................................................................................................... 4 Device Installation ............................................................................................................................... 4 Voicemail ................................................................................................................................................ 10 Setup ................................................................................................................................................. 10 Message Waiting ............................................................................................................................11 Retrieving Messages ....................................................................................................................11 Remote Retrieval ...........................................................................................................................11 Transferring a Phone Number .......................................................................................................11 Blender Manager .................................................................................................................................12 Using Your Device ....................................................................................................................................13 Calling ........................................................................................................................................................13 Making Calls .....................................................................................................................................13 Three-way Calling .........................................................................................................................13 Call Waiting ......................................................................................................................................13 Call Forwarding ............................................................................................................................. 14 Internet Access ....................................................................................................................................15 Connect Other Devices ............................................................................................................15 Data Plan Usage ........................................................................................................................... 16 SMS Messages .............................................................................................................................. 16 Changing Wi-Fi Name and Password .............................................................................. 16 Managing Devices ....................................................................................................................... 16 ii Contents iii Helpful Tips ............................................................................................................................................17 Home Answering Machines ....................................................................................................17 Adjusting Volume .........................................................................................................................17 Powering On/Off .......................................................................................................................... 18 AT&T 3G MicroCell .................................................................................................................. 18 TTY Support .................................................................................................................................. 18 Important Information ........................................................................................................................ 19 E911 Service ........................................................................................................................................... 19 Power Outages .................................................................................................................................... 19 Device Compatibility ........................................................................................................................ 19 In-Home Wiring ................................................................................................................................... 19 Frequently Asked Questions .......................................................................................................... 20 Troubleshooting ..................................................................................................................................... 23 General ................................................................................................................................................... 23 Voice ........................................................................................................................................................ 24 Data .......................................................................................................................................................... 27 Device Configuration .......................................................................................................................... 29 Wi-Fi Settings .................................................................................................................................... 29 Wi-Fi Basic ..................................................................................................................................... 29 Wi-Fi Connections ..................................................................................................................... 30 Wi-Fi Security ................................................................................................................................ 31 Wi-Fi WPS ...................................................................................................................................... 32 WAN ......................................................................................................................................................... 33 WAN Connections ..................................................................................................................... 33 WAN APN ........................................................................................................................................ 34 Firewall .................................................................................................................................................... 36 Firewall Mac/IP/Port Filtering ............................................................................................. 36 Firewall Port Forwarding ...................................................................................................... 38 Contents iv Firewall DMZ .............................................................................................................................. 39 Firewall Security ...................................................................................................................... 40 Advanced ............................................................................................................................................... 41 Advanced Administrator ......................................................................................................... 41 Advanced Router ....................................................................................................................... 42 Advanced SNTP ...................................................................................................................... 43 Advanced Device Reset.......................................................................................................... 44 Specifications .......................................................................................................................................... 45 Safety Instructions ............................................................................................................................... 46 Radio Frequency (RF) Energy ......................................................................................................... 47 FCC Compliance .................................................................................................................................... 48 Warranty ..................................................................................................................................................... 49 How to Get Warranty Service .......................................................................................................50 Other Warranty Programs..............................................................................................................50 Contents vii Getting Started In the Box The package should contain the following items:

AT&T Blender Back-up Battery Power Cord Also Included Quick Start AT&T Blender User Guide AT&T Blender Phone Cable

(Optional) viii Getting Started 1 Quick Start User Guide Getting to Know Your Device Power Signal Strength Voicemail Wi-Fi Information

(See Blender Manager on reverse) WPS*

Ethernet On/Off Telephone Ports Power Input

* Allows WPS-enabled devices to be connected via Wi-Fi without typing a Wi-Fi password. For detailed instructions, please refer to page 15. 2 Getting Started LED Indicators The table below describes possible states for each of the LED indicators. Key Icon Name Indicator Status Power Voicemail Information Wi-Fi Signal Strength Green steady Green blinking Yellow blinking Red blinking Off Green blinking Off Green blinking Off Green steady Green blinking Green flickering Off Green steady Yellow steady Red steady Green blinking Yellow blinking Red blinking On Battery: More than 50%

Battery: 20 50%

Battery: Less than 20%

No power New voicemail No new voicemail Check Blender Manager see messages No unread messages Wi-Fi on Device connected Data transferring Wi-Fi off see Blender Manager Strong signal Moderate signal No service AT&T 3G MicroCell service; Strong signal AT&T 3G MicroCell service; Weak signal No service or SIM error Getting Started 3 How It Works AT&T Blender uses the AT&T cellular network to provide phone service to your corded or cordless home phone(s) and Internet access to your computer and Wi-Fi capable devices (if subscribed to a data plan). Place it anywhere in your house where you have a strong wireless signal. It does not require the use of a home phone wall jack like traditional home phone service. AT&T Blender provides many calling services, such as voicemail, Caller ID, Call Waiting, Call Forwarding, and 3-way Calling for your corded or cordless home phone(s). It also includes a back-up battery in case of power outage. Device Installation Before You Begin Blender works exclusively with the AT&T cellular network and DOES NOT use your homes phone wall jacks. Your device should be located:

Whereyouhaveastrongcellularsignal from a cell tower, typically near a window or outside wall. Nearanelectricalwalloutlet. Inthegeneralareaofyourhomewhere youll be using your home phone, computer or Wi-Fi capable devices. Select which phone(s) or computer(s)/Wi-Fi capable device(s) you will use with Blender:

Youmayconnectuptotwophones. Ifusinganexistingphone,unplugitfromthewalljack. ForInternetaccess,youmayconnectupto10devicesviaWi-Fiandonevia Ethernet simultaneously. STEP 1: Set Up Your Device A Install the Back-up Battery 1. Remove the bottom of the device by pushing the entire cover in the direction of the arrow, as shown. Ports 2. Insert the back-up battery. Battery 3. Replace the cover. 4 Getting Started Getting Started 5 B Turn on Your Device 1. Plug the power cord into an electrical wall outlet that is not controlled by a wall switch. 2. Insert the small end of the power cord into the Power Input port on the back of your Blender device. 3. Press and hold the round On/Off button for 2 seconds until the signal strength light comes on. STEP 2: Connect your Phone A Unplug your Phone from the Wall Jack Blender is not used with your homes phone wall jack. NOTE: If you have a cordless phone, keep it plugged into a power outlet. C Check the Wireless Signal Confirm signal strength light is green for optimal performance. Yellow indicates a moderate signal and may be sufficient. B Connect your Phone to the Device Plug your phone into the Phone 1 port on the Blender device, using your existing phone cable or the included phone cable. NOTE: Do not plug the device into your homes phone wall jack. Signal Strength 6 Getting Started Getting Started 7 C Place a Test Call Place a test call from your connected home phone. Make sure to use 10-digit dialing even for local phone calls. For best results, place the cordless phone base approximately 12 inches from the Blender device. Useful Tips Dial1tosetupandaccessyourvoicemail.Besuretocreatea password for security and remote access. Transferringalandlinephonenumbercantakefive(5)daysormore. Plug a phone into your Blender to make calls. Keep another phone plugged into your wall jack to receive calls until your transfer completes. Check the status of your phone number transfer at att.com/port. YourBlenderdoesnotsupportincomingoroutgoingfaxservice. YourBlenderdoesnotsupportrotaryorpulse-dialingphones. Details on using voicemail and transferring a landline phone number can be found on pages 1011. STEP 3: Connect to the Internet A Select the Device Network 1. Open the Wi-Fi network manager on your computer or Wi-Fi enabled device.*

2. Find and select the Blender Wi-Fi network name (SSID)

(e.g., Mace_XXXXX). Wi-Fi Networks Mace_XXXXX Guestnet Matrix-FreeWiFi Free Public WiFi Alternatively, you can also connect via Ethernet or WPS. For Ethernet, plug one end of your Ethernet cable into the Ethernet port on your computer and the other end into the Ethernet port on the back of the Blender device. For WPS, press and hold the WPS button on the back of your Blender device for 0.5 seconds. Within 2 minutes, press the WPS button on the wireless device you want to connect. Enter Wi-Fi Network Password When prompted, enter the Wi-Fi password found on the bottom of the Blender device. B 8 Getting Started Getting Started 9 Voicemail Access Dial 1Check Blender Manager see messagesStatusIndicatorIcon NameKeyPowerVoicemailInformationWi-FiSignal StrengthGreen Strong ModerateNo serviceYellow Red Green New voicemailNo new voicemailOffGreen OffGreen steadyGreen blinkingOffNo unread messagesWi-Fi onDevice connectedWi-Fi off see Blender ManagerGreen OnNo powerOffNetwork (SSID): Mace_XXXXXXPassword: XXXXXXXXWi-Fi:Blender Manager: http://att.blenderPassword: attadminGreen flickeringData transferring C Confirm Network Connection Go to att.net (or your favorite website) to confirm your Internet connection. When your device is transmitting to and from the Internet, the Wi-Fi light will flicker green. Useful Tip Go to the Blender Manager at http://att.blender on any connected device to view messages from AT&T, check your data usage, and customize your Blender device settings. Voicemail Your Blender comes with standard wireless voicemail. Follow the steps below to setup and use your voicemail. Setup Dial 1 on any home phone connected to the Blender and wait four (4) seconds to connect to your AT&T wireless voicemail. Simply follow the voice prompts to complete setup. To enable remote voicemail retrieval and for added security be sure to create a password during setup. Message Waiting There are two indicators for a new message waiting: 1) the voicemail icon; and 2) an intermittent dial tone. The voicemail icon on your Blender flashes when a voicemail message is waiting. You will also hear an intermittent dial tone on any connected phone handset before placing a call. Retrieving Messages To retrieve voice messages, dial 1 on any home phone connected to the Blender and wait four (4) seconds to connect to your AT&T wireless voicemail box. Simply follow the voice prompts to listen to and manage your messages. (Alternately, you may dial your 10-digit home phone number to access your voicemail box.) Remote Retrieval To retrieve voicemail messages from a phone not connected to the Blender, dial the number associated with your Blender service. When voicemail picks up, press *. You will then be prompted to enter your password. Simply follow the prompts to listen to and manage your voicemail messages. Transferring a Phone Number Transferring a landline phone number to your Blender can take five (5) days or more. Outgoing calls can be made immediately using your Blender, however incoming calls will continue through your old service until the transfer is complete. It is recommended that a phone be kept connected to your existing home wiring or prior service to continue to receive incoming calls until the transfer is complete. To check the status of your transfer, visit www.att.com/port. 10 Getting Started Getting Started 11 Blender Manager The Blender Manager allows you to easily manage your Blender device. With the Blender Manager, you can:

Customizesettings ChangeyourWi-Finetworknameandpassword Checksignalstrength,datausageandSMSmessages Gethelpandinformation To access the Blender Manager, first connect to your Blender device. In your browser address field, enter http://att.blender. Log in with your Web password

(attadmin). A navigation panel is included at the left of the browser interface on each page and contains the following:

Home displays general device information, as well as current network connection (LTE, 4G, 3G) and battery charge. Connected Devices view devices currently connected to your Blender device and blocked devices. Data Usage check your billing month-to-date data usage and days remaining in billing cycle. Messages view messages from AT&T (See SMS Messages on page 16). Settings customize your devices Wi-Fi and security settings (See Wi-Fi Settings on page 29 for detailed instructions). About your Blender get details regarding current device status and device information. AT&T Software Update view software updates that are delivered automatically over the AT&T cellular network. Using Your Device Calling Making Calls Using a phone connected to your Blender, place and receive calls as you normally would. The Blender supports both cordless and corded phone dialing methods. Note: You will need to dial 10 digits even for local numbers. Three-Way Calling While on an existing call, press the Flash (or Talk) key on your phone to put the first party on hold. When you hear a dial tone, dial the second partys number (wait up to four [4] seconds). When the second party answers, press the Flash (or Talk) key again to complete the three-way connection. If the second party does not answer, press the Flash (or Talk) key to end the connection and return to the first party. Note: If your phone does not have a Flash (or Talk) key, use the off-hook mechanism supported by your phone instead. Call Waiting You will hear two tones if someone calls while you are already on a call. To hold the current call and accept the waiting call, press the Flash (or Talk) key. You can press the Flash (or Talk) key anytime to switch back and forth between calls. To clear the current call and accept the waiting call, enter 1 and press the Flash

(or Talk) key. To reject (User Busy) the waiting call, enter 0 and press the Flash (or Talk) key. 12 Getting Started Using Your Device 13 Notes:

YourBlendercomeswithstandardthree-waycallingandcallwaiting.Operation of these features will vary depending on your home phone equipment. IfyourphonedoesnothaveaFlash (or Talk) key, then use the off-hook mechanism supported by your phone. 1. *21*

2. The 10-digit number to which you wish to forward your calls 3. # key Call Forwarding To forward all calls, dial:

(Example: *21*1234567890# forwards your calls to the phone number 123-456-7890) Please wait at least three (3) seconds and you hear a confirmation tone for the forwarding to complete before hanging up. To un-forward calls, dial #21#, please wait at least three (3) seconds and you hear a confirmation tone for the un-forwarding to complete before hanging up. Note: Applicable wireless minute plan rates apply to forwarded calls. Internet Access Connect Other Devices You can connect up to 10 Wi-Fi enabled devices simultaneously to your Blender, including smartphones, tablets, laptops, etc. 1. Open the Wi-Fi network manager on your Wi-Fi enabled device. 2. Find and select the Wi-Fi network name (SSID) Mace_XXXXXX. 3. When prompted, enter the Wi-Fi password found on the bottom of the device. Connect WPS devices Wi-Fi Protected Setup (WPS) allows WPS-enabled devices to be connected to a Wi-Fi network without having to type a Wi-Fi password. 1. With the Blender device powered on, press and hold the WPS button for 0.5 seconds. 2. Within 2 minutes, press the WPS button on the wireless device you want to connect. 3. Your Blender device and the wireless device will communicate and establish the connection. Connect via Ethernet To connect via Ethernet, plug one end of your Ethernet cable into the Ethernet port on your computer and the other end into the Ethernet port on the back of the Blender device. 14 Using Your Device Using Your Device 15 Data Plan Usage You can check your billing month-to-date data plan usage and the days remaining in your billing cycle on the Blender Manager. On any device that is connected to your Blender, enter http://att.blender in your browser address field. Log in with your Web password (attadmin) or customized password, and go to Data Usage. Note: Actual billed usage can be higher than the estimated data usage displayed in the usage meter. SMS Messages Your Blender device is able to receive SMS messages only. You are not able to respond or reply to SMS messages. To view your messages, use any device that is connected to the Blender and enter http://att.blender in your browser address field. Log in with your Web password

(attadmin) or customized password, and go to Messages. Changing Wi-Fi Name and Password You can customize your Blender Wi-Fi network name (SSID) and password using the Blender Manager. On any device that is connected to the Blender, enter http://att.blender in your browser address field. Log in with your Web password

(attadmin) or customized password, and go to Settings > Wi-Fi. Note: You will need to reconnect all Wi-Fi devices using the new Wi-Fi password. Managing Devices You can view devices currently connected to your Blender and block and unblock devices using the Blender Manager. On any device that is connected to the Blender, enter http://att.blender in your browser address field. Log in with your Web password (attadmin) or customized password, and go to Connected Devices. Helpful Tips Home Answering Machines If you choose not to use the voicemail provided by your Blender, you can use your home answering machine by plugging it into the Phone 2 port on the back of your Blender. Then, set your answering machine to pick up calls in fewer rings than the voicemail service, which is set to five (5) rings as a default. Adjusting Volume Use your home phones volume adjustment if available. Alternately, the volume of the Blender can be adjusted if necessary. While on a call, press ** or ## to enter Volume Setting Mode. Press * to decrease volume. Press # to increase volume. To exit Volume Setting Mode press any other key or wait five (5) seconds. Notes:

Fourvolumelevelsareavailable(level1tolevel4);thedefaultsettingisthe Yourhomephone(s)mayhaveaseparatevolumelevelsettingfunctionthatis highest at level 4. independent of the Blender. 16 Using Your Device Using Your Device 17 Powering On/Off The On/Off button is used to turn your Blender on or off when still connected to the power supply. When powered off, the Blender will no longer send or receive calls, but it will continue to charge the back-up battery if still connected to the wall outlet. To use the On/Off button on your Blender, press and hold the button for two (2) seconds to turn power off or until the Battery and Signal Strength indicator lights turn off (Power light remains on when connected to an AC power source). To turn the Blender back on, press and hold the button for two (2) seconds or until the Battery and Signal Indicator lights turn on. AT&T 3G MicroCell For voice-only customer, Blender can be used with the AT&T 3G MicroCell when its within range of the MicroCell signal and the phone number associated with the Blender has been added to the MicroCells approved user list. To update your approved user list, visit att.com/3GMicroCell and click Manage Settings. The signal strength indicator on your Blender will flash green when connected to the MicroCell. TTY Support TTY (Text Telephony) and TDD (Telecommunications Device for the Deaf) are supported by the Blender. In order to use the TTY network, you must have a TTY-

compatible phone and be in TTY mode. Note that most digital wireless devices are TTY-compatible. Dial *983*889*n# to set the TTY mode. n=0:TTYoffmode.Thestandardvoicespeakingmodeandlisteningmode. This is the default setting. n=1:TTYfullmode.TransmitandreceivetheTTYcharacters. n=2:VCOmode.ReceiveTTYcharactersbuttransmitbyspeakingintothe n=3:HCOmode.TransmitTTYcharactersbutreceivebylisteningtothe speaker. receiver. 18 Using Your Device Important Information E911 Service 911 services are supported just as they are on any wireless device. You should expect to provide your home address to the emergency response center responsible for sending first responders (e.g., police, medical assistance, or fire) to your location. Power Outages Blender has a back-up battery with talk time of up to an hour and a half (1.5 hours) depending on environmental factors. Please note youll need a standard corded phone that doesnt require external power to function with the back-up battery for all calling, including 911. If you experience a power outage and your battery is fully depleted, it will be necessary to restart your device when power is restored by pressing and holding the On/Off button for two (2) seconds. Device Compatibility Blender does not support your home security systems, fax machines, dial-up or DSL internet service, DVR services, medical alert services (e.g., Life Alert), or credit card machines. The service cannot be used to make 500, 700, 900, 976, 0+ collect, operator assisted, or dial-around calls (e.g., 1010-XXXX). The device does not support data services (e.g., texting, multimedia message services (MMS), and data tethering). In-Home Wiring Interconnecting to home telephone wiring is not necessary, but is possible;

however, it is not recommended unless you possess sufficient knowledge of electrical systems. Use with home wiring requires the physical disconnection from other services, including the landline coming into your home. Use of a qualified licensed electrician is highly recommended. Improper installation may result in phone equipment damage or even a fire. Important Information 19 Frequently Asked Questions What kind of phone do I need to work with the Blender?

Most standard touch-tone phones may be used. Rotary phones are not supported. Cordless phone systems provide the most flexibility and allow you to easily place additional handsets throughout your home. Cordless phone systems still need to be plugged into a power outlet. During a power outage, a standard corded phone which doesnt require electrical power is recommended. How do I install my Blender?

Please see your Quick Start for the most common installation methods. Other helpful information:

Installationnearawindoworoutsidewallisstronglyrecommendedtoensurethe strongest possible wireless signal in order to maximize voice quality. IftheBlendersignalstrengthindicatordoesnotdisplayhighsignalstrength

(Green) or voice quality is unacceptable, you may need to relocate the device to another part of the home with a stronger wireless signal. Will my Blender work in areas with no or low wireless signal strength?

A strong wireless signal (Green) is recommended for optimal performance. A moderate signal (Yellow) may be sufficient. If you do not see a green light, you may want to choose an alternate location. Does Blender support both voice and data?

Yes, you can choose to use your Blender for voice only, data only, or both voice and data. Visit att.com/blender for more information. Why dont I see the name of the caller on caller ID?

The Blender only supports calling number identification. However, contact names stored on your home phone equipment may display for incoming calls. 20 Frequently Asked Questions Do I need broadband Internet service for the Blender to work?

No, the service is provided through the AT&T wireless network. Can I move my Blender and use it in another location?

Yes, your device can be moved to another location; however, your device should be used in a location where AT&T is authorized to provide wireless service. If your device is used while on other carrier networks, AT&Ts off-net usage restrictions apply.Please see section 4.5 of your Wireless Customer Agreement for details. When I dial a seven-digit number using the Blender, I get a message that the number cannot be completed as dialed. Does the Blender support seven-digit dialing?

Blender requires 10-digit dialing for domestic calls in most areas. Can I make international calls with my Blender?

Yes. To add international calling to your account, please call 611 from your connected phone, or 1-800-331-0500. Can I use my Blender internationally?

No. Use is limited to the United States, Puerto Rico, U.S. Virgin Islands, Guam, and Northern Mariana Islands. What is the warranty on the Blender?

AT&T Blender has a 12-month limited warranty. For details, see page 49. I cant make or receive calls with my Blender service. What should I do?

Please follow the troubleshooting steps in this User Guide. If further assistance is required, call 1-800-331-0500. How many devices can I connect to my Blender?

For voice, you can connect two phones. For data, you can connect up to 10 devices via Wi-Fi simultaneously and one device via Ethernet. Frequently Asked Questions 21 How can I check my data speed?

You can check your data speed by visiting att.com/speedtest. Will connecting additional devices affect my data speed?

Yes, connecting multiple devices to the Blender may affect data speed. What is the difference between the AT&T Wi-Fi network and my Blender Wi-Fi?

Data access via the public AT&T Wi-Fi network does not use your allotted data plan, whereas providing Wi-Fi data access in your home via the Blender will use your data plan. Can I change my Wi-Fi network name and password?

Yes, you can change your Wi-Fi network name and password using the Blender Manager. From any connected device, enter http://att.blender in the address bar and enter the admin login (attadmin) or your customized login and go to Settings > Wi-Fi. How do I know how much data Ive used?

You can view your data usage and the days remaining in your billing cycle using the Blender Manager. From any connected device, enter http://att.blender in your browser address field and enter the admin login (attadmin) or your customized login and go to Data Usage. Once Ive reached the maximum amount of data in the my plan, can I continue to use my Blender for data?

Yes, you can continue to use your Blender device, but overage charges will apply. To upgrade your data plan, visit att.com. Troubleshooting General Problem Only the Power LED is illuminated Possible Solution PressandholdthePowerbuttononthebackofthe Blender for two (2) seconds until the Wi-Fi and Signal Strength indicator lights turn on. Signal strength indicator is blinking Green Red signal strength indicator Flashing Red signal strength indicator TheBlenderisconnectedtoa3GMicroCell,andis operating properly. Moveyourdevicetoanotherareaofthehomewitha strong wireless signal. SIMismissingornotinstalledproperly. 1) Remove the bottom of the device and back-up battery. 2) Locate the SIM card slot and insert the SIM card into the slot until secure. The SIM card will click and lock in place when properly installed in the correct orientation. SIMcardmaybeinvalidordamagedandneedto be replaced. SIM Card doesnt work in my mobile device The SIM card provided with your Blender is intended for use only in your specific Blender and can not be used in a mobile handset. 22 Frequently Asked Questions Troubleshooting 23 Voice Problem No dial tone No caller ID name My answering machine wont pick up calls Possible Solution MakesurethereisACpowertotheBlender.Donot connect to an AC outlet controlled by a wall switch. Movethedevicetoanareawithsufficientnetworksignal

(Green or Yellow Signal Indicator light). Makesureyourhometelephoneequipmenthaspower and is connected properly to the Blender. CheckthattheSignalIndicatorlightisilluminated.If not, make sure the On/Off button on the back of the device is On (press and hold until the Signal Indicator light illuminates). Likeallwirelessservices,onlythecallingnumberis displayed with Caller ID. Yourhomephoneequipmentmaysupportthedisplay of names stored in its contacts memory. Set your answering machine settings to pick up calls before network voicemail, which is approximately five

(5) rings. Alternately the network voicemail setting can be increased; dial 1 to access the voicemail platform and follow the prompts to increase the number of rings. To remove network voicemail from your account, call AT&T Customer Care by dialing 611 or 1-800-331-0500. Voice Problem Poor voice quality Possible Solution Installusingthetelephonecableincludedwith the Blender. MovetheBlendertoadifferentareaofthehome. Locatethedeviceinanareawithmaximumwireless signal strength (Green Signal Indicator). Makesureallconnectionsarefirmlyinplace. Increasethedistanceawayfromotherelectronic devices and the Blender (including cordless base stations, Wi-Fi routers, and cell phones). MovetheBlendernearawindowwithaclear unobstructed view of the sky and remove any objects that may be obstructing the wireless signal. Makesurethehomephonethatisconnectedtothe Blender is of good quality and in good working order. Voicequalitymaydegradewithalowbatterycharge when operating with back-up battery. Connect to an AC power source to recharge when power is available. Cant connect to my 3G MicroCell

(signal strength indicator is not flashing Green) AddthephonenumberassociatedwithyourBlenderto your 3G MicroCell Approved User List. Powercycleyour3GMicroCellaswellasyourBlender. MakesuretheBlenderiswithinrangeofthe3GMicroCell. 24 Troubleshooting Troubleshooting 25 Voice Problem Message Waiting indicator on my home phone equipment doesnt light I hear an intermittent dial tone My phone doesnt ring when a call comes in I hear a constant low frequency tone

(not dial tone) when I try to place a call 26 Possible Solution TheBlenderdoesnotsupportthisfunctionalitywith your home phone equipment. TheBlenderhasadedicatedMessageWaitingindicator light and will flash when you have a new voice message;

you will also hear an intermittent dial tone when you pick up your handset. Youwillhearanintermittentdialtonewhenyouhavea new voicemail message waiting. Dial1fromyourhomephoneequipmentconnectedto the Blender to review your voice messages. Ifyourecentlytransferredyourlandlinenumber,you will continue to receive incoming calls on your previous service until the transfer is complete. To check transfer status, visit www.att.com/port. MakesureyourBlenderisNOTconnectedtoyour in-home phone wiring. Makesureyourhomephoneispoweredonand connected to the Blender. YourBlendernumbermaybesettoCallForward. Dial #21# to un-forward calls. Hangupyourhomephonetorestoredialtone. Data Problem Cant access the Internet Download or upload speeds are slow Blender Network does not appear in the wireless network list Possible Solution CheckthatyourdeviceisconnectedtotheBlenderand the Blender Wi-Fi indicator is green. Makesureyoursignalstrengthindicatorisgreenor yellow. If red, choose an alternate location. CheckAPNsetting,dialingsetup,andfirewallsetting. Checkyourspeedatatt.com/speedtest. Checkyoursignalstrengthindicator.Ifnotgreenor yellow, choose an alternate location. Checkyourwirelessnetworkconnectionusingthe Blender Manager (http://att.blender). LTE and 4G offer the fastest data speeds and if available, the Blender should be located in a covered area. Limitthenumberofdevicesthatareconnected to the Blender. You can block device access using the Blender Manager (http://att.blender) under Connected Devices. VerifythattheBlenderispoweredon. Refreshthenetworklistonthedeviceyouaretryingto connect. RestartyourBlenderbypressingtheOn/Off button for 2 seconds. Then restart your Wi-Fi enabled device. Troubleshooting Troubleshooting 27 Data Problem Cant connect to my Blender Cant access the Blender Manager Possible Solution Check that you are connecting to your Blender Wi-Fi network name (SSID) (e.g. Mace_XXXXXX). If connected via Ethernet, make sure the Ethernet cables are firmly attached. Make sure you entered the correct Wi-Fi password thats found on the bottom of the device. MakesureyouhaveenteredthecorrectURL

(http://att.blender or http://192.168.0.1) in your browser address field. Makesureyouhaveenteredthecorrectpassword, either attadmin or your customized password. If you changed the password and forgot it, you will need to restore the device to the factory default settings. Device Configuration You can manage your Blender settings using the Blender Manager. To access, first connect to your Blender device and enter http://att.blender in the browser address field. Log in with your Admin (attadmin) or customized login. Wi-Fi Settings You can manage your Blender Wi-Fi Settings under Settings > Wi-Fi. Wi-Fi Basic Wi-Fi On/Off: Enable or disable Wi-Fi connectivity. Network Mode: Indicates which mode is active for connecting via Wi-Fi. The default is 802.11b/g/n Mixed Mode. Network Name (SSID): Shows the Wi-Fi network name (SSID), which is broadcast by the device to allow Wi-Fi enabled devices to identify and connect to it. You can change the Network Name by typing the desired name directly in the text box. Broadcast Network Name (SSID): If this setting is enabled, the Blender appears in the list of available Wi-Fi networks on your Wi-Fi enabled devices. If disabled, the network will not appear. 28 Troubleshooting Device Configuration 29 Frequency (Channel): This should be left onAutomaticunless you need to choose a particular channel for your environment. Max Wi-Fi Users: Specify how many devices can simultaneously connect to Blender. Be sure to click Apply after youve made changes. Wi-Fi Connections View devices that are currently connected to your Blender and block and unblock devices from having access. Unblock: Checking the Unblock box and clicking Apply unblocks a previously blocked device, freeing it to connect to the Blender again. The unblocked device is deleted from the Blocked List and will reappear in the Connected Devices list when it connects. Wi-Fi Security Security settings will apply to all connected devices. If you change these settings, existing connected devices may lose their connection. The following information is displayed for each connected device:

Device Name: If you have assigned a name to the connected device, the assigned name will appear in lieu of a host name. MAC Address: A unique network identifier for the connected device. IP Address: IP address of the connected device. Block a Device: Checking the Block box and clicking Apply disconnects the connected device and prevents it from re-connecting to the Blender. The blocked device will then appear in the Blocked list. Block List: Lists any devices you have blocked from having access to the Blender. Note that since these devices are not currently connected and are blocked from connecting, they do not have an IP address. Instead, they are identified by their MAC Address. 30 Device Configuration Wi-Fi Security Mode: Select the desired Wi-Fi security option. WPA-PSK/WPA2-PSKis the latest and most secure method and should be used if possible.No encryptionallows other people to monitor your Wi-Fi traffic and use your data plan to access the Internet. If at all possible, its use should be avoided. Password (Key): If a setting other thanOpenwas selected in theWi-Fi Security Modefield, enter a Wi-Fi Password. This password will need to be entered on any device needing to connect to Blender via Wi-Fi. Password Visibility: If this setting is enabled (On), the Wi-Fi Password is readable onthescreen.Ifdisabled(Off),thepasswordappearsas. Device Configuration 31 Wi-Fi WPS WPS, or Wi-Fi Protected Setup, is a standard that allows easy establishment of a secure wireless home network. This feature is disabled by default. If you change these settings, existing connected devices may lose their connection. WAN These settings affect the connection to the mobile (wide area) network or WAN. Blender automatically selects the optimal mobile network. In some cases, you can also select a network manually (Manual Network Selection). This feature is only useful if multiple networks are available. If this setting is enabled, the device connects only to the specified network. WAN Connections WPS: You may enable or disable WPS by selecting the desired option and clicking Apply. When enabled, the following secondary options will appear:

WPS Mode: You may select either PIN or PBC (Push-Button Connection) by selecting the desired option and clicking Apply. PIN: If selected, you will need to specify up to an 8-digit PIN that other devices will require to connect via this method. Enter the desired PIN in the Client PIN field, then click Apply. PBC: If selected, you will need to momentarily push and release the WPS button on the back of the Blender, then within 2 minutes activate WPS on the desired device via a physical or virtual button to complete the pairing process. Note: Refer to your connecting devices documentation for specific information on how to complete the WPS process on the desired device. WAN Connection Mode: Indicates if Automatic or Manual Network Selection is in use. If you want to select Manual, you must first click the Disconnect button on the Home screen, then return to WAN Connections to select Manual and click Apply. 32 Device Configuration Device Configuration 33 Secondary DNS: Enter the IP address of the desired secondary DNS. This address is optional and may be left blank if desired. Authentication: Select the option specified by your service provider:

None CHAP PAP Username: If the Authentication isNone, this can be left blank. Otherwise, enter the value specified by your service provider. Password: If the Authentication isNone, this can be left blank. Otherwise, enter the value specified by your service provider. IPv6 APN: The APN associated with the selected profile. Enter the appropriate IPv6 APN here. IPv6 DNS: Select Auto DNS or Manual DNS. Use this setting to enable or disable the Manual DNS feature. If Manual is enabled, provide the following data. IPv6 Primary DNS: Enter the IP address of the desired primary DNS. This address is required if you select theManual DNS check box. WAN APN This APN is pre-configured to access the AT&T network. You should not change the APN unless you have a corporate account (with your own APN). Profile Selection: The default profile is the AT&T network, ATT Broadband, and cannot be edited. If you need to change the APN, select thePTAoption and then provide the required data below. This information is available from your network service provider. Profile Name: The desired name used to select your custom APN from the Profile Selection drop down list. PDP Type: You can select from IPv4, IPv6, or IPv4 and IPv6. IPv4 APN: The APN associated with the selected profile. Enter the appropriate IPv4 APN here. IPv4 DNS: Select Auto DNS or Manual DNS. Use this setting to enable or disable the Manual DNS feature. If enabled, provide the following data:

Primary DNS: Enter the IP address of the desired primary DNS. This address is required if you select theManual DNS check box. 34 Device Configuration Device Configuration 35 Firewall A firewall protects your connected devices against malicious incoming traffic from the Internet. The firewall cannot be disabled, but the following settings are available. Firewall - MAC/IP/Port Filtering applications by clicking the Add Custom Application button, but you need to know details of the traffic used and generated by the applications you wish to define. In particular, you need to know the port numbers and the protocol

(TCP, UDP) used by outgoing traffic. Dropped: Internet traffic is blocked by default. Only traffic from the selected pre-defined or custom applications are allowed to access the internet. Applications: Use these check boxes to deny or allow access to the Internet for each application, as an exception to the selected Default Policy of accepting or dropping internet traffic. Custom Applications: This feature allows you to define your own applications. Once defined, these applications can be enabled and disabled the same way as pre-defined applications. To define an application, you need to know the ports and protocol (TCP, UDP) used by the application for outgoing traffic. To start, click the Add Custom Applicationbutton, then provide the following data:

MAC/IP/Port Filtering: You can Enable or Disable the MAC/IP/Port Filtering feature as needed to block certain Internet traffic. If this setting is enabled, you can then choose whether traffic is Accepted or Dropped by default by selecting the appropriate option from the Default Policy drop down. Default Policy:

Accepted: Internet traffic is allowed by default. Only traffic from the selected applications will be blocked from accessing the internet. Traffic is identified by port numbers. Some applications are pre-defined. You can define additional MAC Address: A network identifier unique to each devices hardware. Destination IP Address: The internal IP address where traffic will be filtered to. Source IP Address: The source IP address that traffic will be filtered from. Protocol: You can select from TCP, UDP, or ICMP as the traffic type you would like to filter. Destination Port Range: The range of ports that traffic will be filtered to. Enter the beginning and end of the port range for each application. For a single port, enter the port number in both fields. For a port range, enter the beginning of the range in thefirstfield and the end of the range in thesecondfield. Source Port Range: The range of ports that traffic will be filtered from. Action: Selecting Drop or Accept will determine if the rule will allow or block traffic based on the criteria specified. Comment: Here you will need to add a name or description to the rule in order to click Apply to save and implement the rule. 36 Device Configuration Device Configuration 37 Firewall Port Forwarding Port Forwarding allows for specific external ports on the Blender to be mapped to specific ports on a specific device on the internal network. You can have a maximum of 10 Port Forwarding/Virtual Server rules in the system. You can enable or disable Port Forwarding to allow certain devices to act as virtual servers within the internal Blender network. If you select Enable, the Virtual Server Settings will appear:

IP Address: Enter the internal IP address (i.e. 192.168.1.101) that you would like traffic from a specific external port directed to internally. Port Range: Enter the starting and ending port numbers that will be directed to the internal device. Protocol: You may pick TCP, UDP, or TCP+UDP traffic types to be directed. Comment: Enter a comment or label to be saved with this custom port forwarding rule. Be sure to click Apply to confirm your configuration. Firewall DMZ The DMZ, or De-Militarized Zone, is a selected internal IP address of a device that allows full access and connectivity from outside traffic, through the firewall, to a specific internal device without being filtered or blocked. 38 Device Configuration Device Configuration 39 DMZ Settings: You may choose to enable or disable the DMZ setting here. DMZ is disabled by default. DMZ IP Address: If DMZ Settings are enabled, you need to enter the internal IP address of the desired device that will be directly accessible from outside the firewall. Firewall Security Advanced Advanced Administrator The Admin Login (password) is used to access the Blender Manager. This page allows you to change the Admin Login. Remote Management (via WAN): This setting will allow or deny remote management of the Blenders device settings via an external or remote internet connection. Default is set to Deny. Ping from WAN Filter: This setting will allow or deny your Blender to respond to remote Ping requests. Default is set to Deny. Current Login: Enter the current Admin Login for the Blender Manager in this field. The default login is attadmin. New Login: Enter the new Admin Login, using only letters, numbers, and standard punctuation symbols. The password must be at least 6 characters long. The maximum length is 64 characters. Verify New Login: Re-enter the new Admin Login in this field, then click Apply. Note: Once you change the default Login, there is no way to retrieve the new Login and the Blender must be Factory Reset to restore settings to the default Login (attadmin). 40 Device Configuration Device Configuration 41 Advanced Router UPnP: Universal Plug and Play (UPnP) is a set of networking protocols that permits networked devices to discover each others presence on the network. The default value for this setting is Disable. VPN Passthrough: This feature allows VPN client software on connected devices to connect through this device to remote VPN servers. Normally, this option should be left enabled. Advanced SNTP IP Address: The IP address for this device as seen from the local network. This is set to a default value. Subnet Mask: The default value 255.255.255.0 is standard for small (class C) networks. MAC Address: The MAC Address is a network identifier. This read-only field displays the MAC Address for the Wi-Fi interface on this device. DHCP Server: This option is set to Enable by default. The DHCP server allocates an IP address to each Connected Device. DHCP IP Pool: This is the IP address range used by the DHCP server. This indicates the range of IP addresses which may be allocated to connected devices. DHCP Lease Time: This specifies the time period (in hours) for how long each device is assigned an internal IP address. Current Local Time: Displays the current date and time on the device. Time Set Mode: Select from Manual Set Time or SNTP Auto Synchronization to determine how Blender determines local time. Manual Set Time Selecting this option will allow you to manually set the Month, Day, Year, Hour, Minute, and AM/PM parameters for your local time. Click Apply for changes to take effect. SNTP Auto Synchronization SNTP, or Simple Network Time Protocol, is used to allow synchronization of the date and time between your device and the system time on the network. You can pick up to three SNTP Servers you want your device to synchronize with, including specifying a server not listed by selecting Other from the dropdown and typing in the server address. You can also set the Time Zone and Daylight Saving Time status. 42 Device Configuration Device Configuration 43 Advanced Device Reset Click theResetbutton to reset all settings to their factory default values. This causes a restart, and changes the current Wi-Fi hotspot settings if they do not match the factory default values. In this case, all connected devices need to reconnect using the default hotspot settings. Specifications Dimensions (WDH) Weight Back-up Battery Talk time Standby time 6.3" (W) 4.37" (D) 1.05" (H) 14.11 oz. (including back-up battery) 1,500 mAh 3.5 hours (GSM) 1.5 hours (WCDMA) 36 hours Note: The value of the talk time or standby time varies with the actual environment. 44 Device Configuration Specifications 45 FCC Compliance This device complies with part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference. Caution: Changes or modifications not expressly approved by the manufacturer could void the users authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorientorrelocatethereceivingantenna. Increasetheseparationbetweentheequipmentandreceiver. Connecttheequipmentintoanoutletonacircuitdifferentfromthattowhich the receiver is connected. Consultthedealeroranexperiencedradio/TVtechnicianforhelp. Warranty ZTE offers you a limited warranty that the enclosed subscriber unit and its enclosed accessories will be free from defects in material and workmanship for a period that expires one (1) year from the date of sale of the Product to you, provided that you are the original end-user purchaser of the Product and provided that your purchase was made from a supplier authorized by the Seller. Transfer or resale of a Product will automatically terminate warranty coverage with respect to that Product. This limited warranty is not transferable to any third party, including but not limited to any subsequent purchaser or owner of the Product. This limited warranty is applicable only to end users in the United States. This product or phone is warrantied for 12 months from date of purchase. For warranty service information, please call ZTE service number (877) 817-1759

(toll-free). The manufacturers website, http://www.zteusa.com, is also available for assistance. This warranty only applies if the product has been used in accordance with the manufacturers instructions under normal use and with reasonable care. What this warranty does not cover:

a) Defects or damages resulting from the misuse of this product. b) Defects or damages from abnormal use, abnormal conditions, improper storage, exposure to moisture, dampness or corrosive environments, unauthorized modifications, unauthorized repair, neglect, rough handling, abuse, accident, alteration, improper installation, incorrect voltage application, food or liquid spoilage, acts of God. 48 FCC Compliance Warranty 49 c) Normal wear and tear. d) If the Product has been opened, modified or repaired by anyone other than a warranty service center or if it is repaired using unauthorized spare parts. e) If the serial number or mobile accessory date code has been removed, erased, defaced, altered, or are illegible in any way subject to sole judgment of ZTE. LIMITED WARRANTY TO THE EXTENT PERMITTED BY APPLICABLE LAW, THIS LIMITED WARRANTY IS YOUR SOLE AND EXCLUSIVE REMEDY AGAINST ZTE AND ZTES SOLE AND EXCLUSIVE LIABILITY IN RESPECT OF DEFECTS IN PRODUCT. HOWEVER, THIS LIMITED WARRANTY SHALL NOT EXCLUDE NOR LIMIT ANY OF YOUR LEGAL

(STATUTORY) RIGHTS UNDER THE APPLICABLE NATIONAL LAWS. TO THE EXTENT PERMITTED BY APPLICABLE LAW ZTE DOES NOT ASSUME ANY LIABILITY FOR LOSS OF OR DAMAGE TO OR CORRUPTION OF DATA, FOR ANY LOSS OF PROFIT, LOSS OF USE OF PRODUCTS OR FUNCTIONALITY, LOSS OF BUSINESS, LOSS OF REVENUES OR LOSS OF ANTICIPATED PROFIT, INCREASED COSTS OR EXPENSES OR FOR ANY INDIRECT, OR SPECIAL OR CONSEQUENTIAL LOSS OR DAMAGE. TO THE EXTENT PERMITTED BY APPLICABLE LAW, ZTES LIABILITY SHALL BE LIMITED TO THE PURCHASE VALUE OF THE PRODUCT. THE ABOVE LIMITATIONS SHALL NOT APPLY TO DEATH OR PERSONAL INJURY CAUSED BY DEFECT OF PRODUCT IN MATERIAL, DESIGN, AND WORKMANSHIP. How to Get Warranty Service To obtain warranty service, please call (877) 817-1759. Please have the following information available when you send the device in for repair:

AvalidProofofPurchase Returnaddress Daytimephonenumberorfaxnumber Model#

IMEI#(Lookforthe15-digitIMEI#behindtheback-upbatteryofthedevice.) Completedescriptionoftheproblem Transportationprepaid Other Warranty Programs You may have other warranty programs with your purchase, such as warranty exchange. If so, please refer to equipment package or the original point of sale. 50 Warranty Not compatible with home security systems, wireless messaging and data services, fax service, DVR/Satellite systems, or medical alert systems, credit card machines, IP/PBX Phone systems, dial-up or DSL internet service. Blender is designed to provide coverage that is consistent with other AT&T wireless devices, but AT&T does not represent that Blender will be the equivalent to landline phone service. 911 calls are routed based on the wireless networks automatic location technology, but you may have to provide your home address to emergency responders. AT&T recommends that you always have an alternative means of accessing 911 service from your home during a power or network outage, such as a landline telephone. Service provided by AT&T Mobility. 2013 AT&T Intellectual Property. All rights reserved. AT&T, the AT&T logo and all other AT&T marks contained herein are trademarks of AT&T Intellectual Property and/or AT&T affiliated companies. All other marks contained herein are the property of their respective owners. Copyright 2013 ZTE CORPORATION. All rights reserved. No part of this publication may be excerpted, reproduced, translated or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without the prior written permission of ZTE Corporation. The manual is published by ZTE Corporation. We reserve the right to make modifications on print errors or update specifications without prior notice. Version No. : R1.1 Edition Time: 2012.12 Manual No. : 081704100123

ZTE CORPORATION ZTE Plaza, Keji Road South, Hi-Tech, Industrial Park, Nanshan District,Shenzhen, Guangdong, 518057, P.R.China Tel: +86-29-88458594 ; Fax: +86-29-88458594 Date: March 22, 2013 Federal Communications Commission Authorization and Evaluation Division Confidentiality Request regarding application for certification of FCC ID: Q78-Z700 Pursuant to Sections 0.457 and 0.459 of the Commissions Rules, we hereby request confidential treatment of information accompanying this application as outlined below:

Schematics (file: Z700_Schem.pdf) Block Diagram (file: Z700_BlkDia.pdf) Parts List (file: Z700_PartsLst.pdf) Operation Description (file: Z700_OpDes.pdf) Tune up Procedure (file: Z700_TunPro.pdf) The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, ________________________ Yang Zhao Rev. 1/1/03

ZTE CORPORATION ZTE Plaza, Keji Road South, Hi-Tech, Industrial Park, Nanshan District,Shenzhen, Guangdong, 518057, P.R.China Tel: +86-29-88458594 ; Fax: +86-29-88458594 Statement We, ZTE CORPORATION, states that our device, FCC ID: Q78-Z700. The label will be put under the battery inside the battery compartment and it is visible to the users as they purchase the products and install the battery. ________________________ Yang Zhao