FCC ID: Q78-ZXH267N11 Home Gateway

ZXHN H267N Home Gateway User Manual Manual No:

Edition Time:

LEGAL INFORMATION Copyright 2021 ZTECORPORATION. The contents of this document are protected by copyright laws and international treaties. Any reproduction or distribution of this document or any portion of this document, in any form by any means, without the prior written consent of ZTE CORPORATION is prohibited. Additionally, the contents of this document are protected by contractual obligations. All company, brand and product names are trade or service marks, or registered trade or service marks, of ZTE CORPORATION or of their respective owners. This document is provided as is, and all express, implied, or statutory including warranties, representations or conditions are disclaimed, without limitation any implied warranty of merchantability, for a particular purpose, title or non-infringement. ZTE CORPORATION and its licensors shall not be liable for damages resulting from the use of or reliance on the information contained herein. ZTE CORPORATION or its licensors may have current or pending intellectual property rights or applications covering the subject matter of this document. Except as expressly provided in any written license between ZTE CORPORATION and its licensee, the user of this document shall not acquire any license to the subject matter herein. ZTE CORPORATION reserves the right to upgrade or make technical change to this product without further notice. Users may port.zte.com.cn to inquire related information. The ultimate right to interpret this product resides in ZTE CORPO-

RATION. visit ZTE technical support website http://sup-

1 Safety Precautions Note:

Before using the device, read the following safety precautions. ZTE bears no liability to the consequences incurred by violation of the safety instructions. Usage Cautions Read all the safety cautions carefully before using the device. Only use the accessories included in the package, such as power supply adapter and battery. Do not extend the power cord, otherwise the device will not work. The power supply voltage must meet the requirements of the device input voltage (The voltage fluctuation range is less than 10%). Keep the power plug clean and dry to prevent any risk of electric shock or Disconnect all the cables during a lightning storm to prevent the device from Power off and unplug the power plug when the device is not in use for a long other dangers. damage. time. Do not attempt to open the covers of the device. It is dangerous to do so when the device is powered ON. Power off and stop using the device under the conditions such as, abnormal sound, smoke, and strange smell. Contact the service provider for mainte-

nance if the device is faulty. Environment Requirements Ensure proper ventilation to the device. Place the device away from direct sunlight. to the device. Keep the device ventilated and dry. Never spill any liquid on the device. Do not place any object on the device to prevent any deformation or damage Do not place the device near any source of heat or water. Keep the device away from any household appliances with strong magnetic or electric fields, such as microwave oven and refrigerator. Cleaning Requirements Before cleaning, power off the device, and unplug all the cables connected to the device, such as power cable, optical fiber, and Ethernet cable. Do not use any liquid or spray to clean the device. Use a soft dry cloth. Environment Protection Do not dispose the device or battery improperly. Observe the local regulations about the equipment disposal or treatment. RF Exposure Information The Maximum Permissible Exposure (MPE) level is calculated based on a distance of d=20 cm between the device and the human body. To maintain compliance with the RF exposure requirement, a separation distance of 20 cm between the device and the human should be maintained. Environmental Information The equipment you purchased has required the extraction and use of natural It may contain substances that are hazardous resources for its production. to peoples health and to the environment. To avoid putting such substances into our environment and to reduce pressure on our natural resources, we ask that you reuse or recycle your end-of-life equipment by using an accredited electronics take-back system. The symbols below indicate that this product should be reused or recycled and not simply discarded. Please locate and use an appropriate reuse and recycling site. If you need more information on collection, reuse and recycling systems, con-

tact your local or regional waste administration. You may also contact your equipment provider for more information on the environmental performances of these products. FCC - PART 68 This equipment complies with Part 68 of the FCC rules and the requirements adopted by the ACTA. On the bottom of this equipment is a label that contains, among other information, a product identifier in the format US:

ZTEDL01AH267N11. If requested, this number must be provided to the telephone company. This equipment uses the following USOC jacks: RJ-11, RJ-45. REN (RINGER EQUIVALENT NUMBERS) STATEMENT Notice: The Ringer Equivalence Number (REN) assigned to each terminal device provides an indication of the maximum number of terminals allowed to be connected to a telephone interface. The termination on an interface may consist of any combination of devices subject only to the requirement that the sum of the Ringer Equivalence Numbers of all the devices does not exceed 5. ATTACHMENT LIMITATIONS STATEMENT Notice: This equipment meets telecommunications network protective, operational and safety requirements as prescribed in the appropriate Terminal Equipment Technical Requirements document(s). This is confirmed by marking the equipment with the Industry Canada certification number. The Department does not guarantee the equipment will operate to the user's satisfaction. Before installing this equipment, users should ensure that it is permissible to be connected to the facilities of the local telecommunications company. The equipment must also be installed using an acceptable method of connection. The customer should be aware that compliance with the above conditions may not prevent degradation of service in some situations. Repairs to certified equipment should be coordinated by a representative designated by the supplier. Any repairs or alterations made by the user to this equipment, or equipment malfunctions, may give the telecommunications company cause to request the user to disconnect the equipment. Users should ensure for their own protection that the electrical ground connections of the power utility, telephone lines and internal metallic water pipe system, if present, are connected together. This precaution may be particularly important in rural areas. Caution: Users should not attempt to make such connections themselves, but should contact the appropriate electric inspection authority, or electrician, as appropriate FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC Radiation Exposure Statement This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body. This equipment complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received, including interference that may cause undesired operation. Caution!

The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user authority to operate the equipment. 2 Cable Connection Figure 2-1 shows the devices that are connected to interfaces of the ZXHN H267N device. Figure 2-1 Cable Connection 3 Interfaces and Buttons The product is targeted to pvovide 24-hours continuous triple-play services, including VoIP. Figure 3-1 shows the interfaces and buttons on the back panel of the ZXHN H267N device. Figure 3-1 The Back Panel Table 3-1 describes the interfaces and buttons on the back panel and side panel of the ZXHN H267N device. Table 3-1 Interfaces and Buttons Interface/Button Description ON/OFF Power switch Power 12 V DC power connector Phone1/Phone2 RJ-11 telephone interface, connected to the telephone with RJ-11 telephone cable. LAN1/LAN2/LAN3 RJ-45 FE Ethernet interface LAN4/WAN RJ-45 GE Ethernet interface, WAN interface is optional. DSL RJ-11 DSL interface Interface/Button Description Reset WLAN WPS Reset button When the power is on, use a needle to press the button for over 2 seconds to restore the default settings. WLAN button Enable/disable the WLAN function. WPS button Enable/disable the Wi-Fi protection. When the Wi-Fi protection is enabled, users can access the network automatically. USB*

USB 2.0 interface The item with * varies from device type. 4 Indicator Figure 4-1 The Front Panel Figure 4-1 shows the indicators on the front panel of the ZXHN H267N unit. Table 4-1 describes the indicators on the front panel of the ZXHN H267N unit. Table 4-1 Descriptions of Indicators LED Indicator Status Description Power Solid green The ZXHN H267N is powered ON. OFF The ZXHN H267N is powered OFF. DSL Solid green DSL synchronization is normal and the link connection is normal. Fast Flashing Now in the handshaking process to establish the link connection. Slowly Flashing Physical link exists, however carrier wave has not been detected. OFF Link has not been established. Internet Solid green The connection is established and a correct IP address is obtained. Flashing green OFF Currently in data transmission. Internet connection is not established, or the ZXHN H267N is switched off. Status Description LED Indicator WLAN Solid green The WLAN RF switch is on. Flashing green Solid red Currently in data transmission. Flashing frequency indicates WiFi network traffic. WPS access is successful. This solid-on light will be automatically off after 5 minutes. Fast flashing red The WPS accessing of the WLAN terminal is faulty. Slowly flashing red WLAN terminal is in WPS accessing process. OFF The WLAN RF switch is off. LAN1 - LAN4 Solid green LAN connection has been established. Flashing green Data transmission is in processing. The indicator flashes according to the LAN traffic. OFF LAN connection has not been established. LED Indicator Phone1 -

Phone2 Status Description Solid green The ZXHN H267N has registered on the VoIP network. Flashing green Indicates when the associated telephone is off-hook. OFF The ZXHN H267N has not been registered on the VoIP network. USB*

Solid green The USB device is connected. Flashing green Currently in data transmission. OFF No USB device. The item with * varies from device type. 5 Power Adapter Input: AC 100 V - 240 V, 50/60 Hz, Output: DC 12 V Power Adapter Note:

Please use the power adapter provided by the manufacturer.

ZTE OMIN RBOTN Uri) FCC ID: Q78-ZXH267N11 CERTIFIED US: ZTEDLO1AH267N11 This unit complies with part 15 of the FCC Rules. RENO 26 Operation is subject to following two conditions:

Rated Input: 12V===1.0A (1) This device may not cause harmful interference.

(2) This device must accept any interference received, including interference that may cause undesired operation.

= es ZTE CORPORATION Made in China

CONFIDENTIALITY REQUEST for Certification Service in USA Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21048

<2021-04-27>

TO WHOM IT MAY CONCERN Pursuant to Paragraphs 0.457 and 0.459 of the Commissions Rules (47 C.F.R.) and Section 552(b)(4) of the Freedom of Information Act, we requests confidentiality for the following products:

FCC ID Q78-ZXH267N11 Model name ZXHN H267N For the product stated above, we request confidential;

that the following information be held Exhibits Long-Term Confidentiality Short-Term Confidentiality Short-Term Confidentiality Days External Photos Internal Photos Block Diagram Schematics Test Setup Photos Users Manual Parts List Tune Up Operational Descriptions The long-term confidentiality exhibits contain our trade secrets and proprietary information that could be of benefit to our competitors. The short-term confidentiality on the basis of ensuring that business sensitive information remains confidential until the actual marketing of our new device. If you have any questions, please feel free to contact me at the address shown below. Sincerely,

(Signed) Name: Yuming Xie Company: ZTE Corporation Address: ZTE Plaza, Hi-tech Park, Nanshan District, Shenzhen, Guangdong, China 518057 Phone: 0086-755-26777740 E-Mail: xie.yuming@zte.com.cn

TECHNICAL COMPLIANCE STATEMENT This is to certify that the product listed in follows was (were) tested in the BTL EMC Laboratory to comply with below FCC official limits. Equipment Brand Name Model Name Applicant Address Standard(s) Report(s) Home Gateway ZTE ZXHN H267N ZTE Corporation ZTE Plaza, Keji Road South, Hi-Tech Industrial Park Nanshan District, Shenzhen, Guangdong, P.R. China FCC CFR Title 47, Part 15, Subpart B ANSI C63.4-2014 BTL-FCCE-1-2103H042 The test data, data evaluation, and equipment configuration contained in our test report(s) above was (were) obtained utilizing the test procedures, test instruments, test sites that has been accredited according to the ISO/IEC 17025 quality assessment standard and technical standard(s). The test data contained in the referenced test report relate only to the EUT sample and item(s) tested. Kevin Li Authorized Signatory BTL INC. No.3, Jinshagang 1st Road, Shixia, Dalang Town, Dongguan, Guangdong, China. TEL: +86-769-8318-3000 FAX: +86-769-8319-6000

RF_160, Issue 02 Declaration of Authorization ZTE Corporation We Name:

Address: ZTE Plaza, Hi-tech Park, Nanshan District City:

Country: China Shenzhen, Guangdong Declare that:

Name Representative of agent: Ms. Riley Wei Agent Company name: BTL Inc. Address: No. 29, Jintang Road, Tangzhen Industry Park Pudong New Area City: Shanghai Country: China is authorized to apply for Certification and signing related documents of the following product(s), including 731 form(s):

Product description: Home Gateway Type designation: ZXHN H267N Brand: ZTE FCC ID: Q78-ZXH267N11 on our behalf. Date:

2021-04-27 City:

Shenzhen, Guangdong Name:

Yuming Xie Function: Product Certification Manager Signature:

Notes:

(1): Required for FCC application

(2): For FCC it must be the Grantee Code owner or the authorized agent.