MF193 USB Modem Quick Guide ZTE CORPORATION NO. 55, Hi-tech Road South, ShenZhen, P.R.China Postcode: 518057 Tel: +86-755-26779999 URL: http://www.zte.com.cn E-mail: mobile@zte.com.cn LEGAL INFORMATION Copyright 2011 ZTE CORPORATION. All rights reserved. No part of this publication may be excerpted, reproduced, translated or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without the prior written permission of ZTE Corporation. The manual is published by ZTE Corporation. We reserve the right to make modifications on print errors or update specifications without prior notice. Version No. : R1.0 Edition Time : Mar.22,2011 Manual No. :
C h a p t e r 1 Quick Guide Introduction ZTE USB modem in The HSUPA/HSDPA/WCDMA/EDGE/GPRS/GSM networks. With USB interface connecting to a laptop or a desktop PC, it integrates the functionality of a modem and a mobile phone (SMS), and combines mobile communication with Internet perfectly. It supports data and SMS services through the mobile phone network, enabling you to communicate anytime and anywhere. multi-mode working modem, USB is a Specification The following table shows the specification of your device. Interface Type Systems supported Operating systems supported Functions USB 2.0 HIGH SPEED Supports most types of laptop and desktop PC. Windows XP(SP2 and later), Vista, Windows 7 MAC 10.4, 10.5, 10.6 SMS service, Data service, Applications management, support microSD card, etc. Network Standards HSUPA/HSDPA/WCDMA/EDGE/GPRS/GSM Transmission speed (Max) Temperature Dimension Weight microSD capability Notes:
HSUPA: 5.76 Mbps UL HSDPA: 7.2 Mbps DL Storage: -40 ~ +80 Operation:-10 ~ +60 76.5 mm 27.2 mm 10.5 mm (with cap) About 21g Support up to 32 GB microSD card microSD is a trademark of SD Card Association. Getting to Know Your Device The following figure shows the appearance of the MF193. It is only for your reference. The actual product may be different. Confidential and Proprietary Information of ZTE CORPORATION 1 Quick Guide 1. Front Cover 2. Modem Cap 3. Indicator 4. microSD card slot 5. SIM/USIM card slot 6. USB Connector Installing Hardware 1. Press and push the back-cover of the phone down to release and remove it. Notes:
Do not open the front cover rudely so as to avoid the damage of the front cover. 2. Insert the SIM/USIM card into the SIM/USIM card slot. 2 Confidential and Proprietary Information of ZTE CORPORATION Quick Guide Notes:
Insert the SIM/USIM card into the slot with the metal contact area facing downwards, and then push SIM/USIM card as far as possible, as shown in the following picture. 3. Insert the microSD card into the microSD card slot, as shown in the following picture. Notes:
This modem only supports microSD card. 4. Put the front cover of the modem upon the body of modem. Direct the front cover towards the locking catches on the sides of the modem and push the front cover to lock it into place. Confidential and Proprietary Information of ZTE CORPORATION 3 5. Connect the Modem to your laptop or desktop PC. Quick Guide i. Plug the USB connector into your computers USB port and make sure that it is tightly inserted. ii. The OS automatically detects and recognizes new hardware and starts the installation wizard. Software Installation Guide On different operating systems, the installation procedures may be difference. Follow the system prompts during operation. For Windows OS Your system will start the software setup process automatically when you connect the modem to your computer correctly. Follow the system prompts to complete the software installation. Notes:
If the system does not launch installation automatically, you can run the installation program in path of My Computer > ZTEMODEM. For Mac OS The system will automatically display a ZTEMODEM CD-ROM icon on the desktop, when you connect the modem to your computer correctly. Double click the installation software package in the ZTEMODEM, and follow the system prompts to complete the software installation. Safe Removal from Your System Please close the application software, and then you can pull out the USB Modem safely. How to Use Your Modem Various icons are presented to enable quick operation of the following functions:
Connect Connect to the Internet. 4 Confidential and Proprietary Information of ZTE CORPORATION SMS Phonebook Settings Click New button, enter recipients number and content, and then click Send to send new message. Click New to fill in a new contact person and contact details. Set the configuration for the USB modem. Data records Show the connection information. Quick Guide Warning and Notice To the Owner Some electronic devices are susceptible to electromagnetic interference sent by modem if inadequately shielded, such as the electronic system of vehicles. Please consult the manufacturer of the device before using the modem if necessary. Operating the modem may interfere with medical devices like hearing aids and pacemakers. Please always keep them more than 20 centimeters away from such medical devices when they are turned on. Turn the modem off if necessary. Consult a physician or the manufacturer of the medical device before using the modem. Be aware of the usage limitation when using a modem at places such as oil warehouses or chemical factories, where there are explosive gases or explosive products being processed. Turn off your modem if required. The use of electronic transmitting devices is forbidden in aircrafts, at petrol stations and in hospitals. Please observe and obey all warning signs and switch off your modem in these conditions. Do not touch the inner antenna area if not necessary. Otherwise it will affect your modems performance. Store the modem out of the reach of little children. The modem may cause injury if used as a toy. Do not touch the metallic parts of the modem so as to avoid a burn, when the modem is working. Use Your USB Modem Please use original accessories or accessories that are authorized. Using any unauthorized accessories may affect your modems performance, and violate related national regulations about telecom terminals. Avoid using the modem near or inside metallic structures or establishments that can emit electromagnetic waves. Otherwise it may influence signal reception. The modem is not waterproof. Please keep it dry and store in a shady and cool place. Do not use the modem immediately after a sudden temperature change. In such case, it will produce dew inside and outside the modem, so dont use it until it becomes dry. Handle the modem carefully. Do not drop, bend or strike it. Otherwise the modem will be damaged. No dismantling by non-professionals and only qualified technicians can undertake repair work. Confidential and Proprietary Information of ZTE CORPORATION 5 Quick Guide Operating temperature range of -10 ~ +60 and humidity range of 5 % ~ 95 % are recommended. Limited Warranty This warranty does not apply to defects or errors in the Product caused by:
i.Reasonable abrasion. ii.End Users failure to follow ZTEs installation, operation or maintenance instructions or procedures. iii.End Users mishandling, misuse, negligence, or improper installation, disassembly, storage, servicing or operation of the Product. iv.Modifications or repairs not made by ZTE or a ZTE-certified individual. v.Power failures, surges, fire, flood, accidents, actions of third parties or other events outside ZTEs reasonable control. vi.Usage of third-party products, or usage in conjunction with third-party products provided that such defects are due to the combined usage. vii.Any other cause beyond the range of normal usage intended for the Product. End User shall have no right to reject or return the Product, or receive a refund for the Product from ZTE under the above-mentioned situations. This warranty is End Users sole remedy and ZTEs sole liability for defective or nonconforming items, and is in lieu of all other warranties, expressed, implied or statutory, including but not limited to the implied warranties of merchantability and fitness for a particular purpose, unless otherwise required under the mandatory provisions of the law. Limitation of Liability ZTE shall not be liable for any loss of profits or indirect, special, incidental or consequential damages resulting from or arising out of or in connection with using of this product, whether or not ZTE had been advised, knew or should have known of the possibility of such damages, including, but not limited to lost profits, interruption of business, cost of capital, cost of substitute facilities or product, or any downtime cost. FCC Compliance This device complies with part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference. Caution: Changes or modifications not expressly approved by the manufacturer could void the users authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. 6 Confidential and Proprietary Information of ZTE CORPORATION Quick Guide Consult the dealer or an experienced radio/ TV technician for help. Radio Frequency (RF) Energy This model device meets the governments requirements for exposure to radio waves. This device is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government:
The exposure standard for wireless devices employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6 W/kg. *Tests for SAR are conducted using standard operating positions accepted by the FCC with the device transmitting at its highest certified power level in all tested frequency bands. Although the SAR is determined at the highest certified power level, the actual SAR level of the device while operating can be well below the maximum value. This is because the device is designed to operate at multiple power levels so as to use only the poser required to reach the network. In general, the closer you are to a wireless base station antenna, the lower the power output. The highest SAR value for the model device as reported to the FCC when worn on the body, as described in this user guide, is 1.10 W/kg (Body-worn measurements differ among device models, depending upon available enhancements and FCC requirements.) While there may be differences between the SAR levels of various devices and at various positions, they all meet the government requirement. The FCC has granted an Equipment Authorization for this model device with all reported SAR levels evaluated as in compliance with the FCC RF exposure guidelines. SAR information on this model device is on file with the FCC and can be found under the Display Grant section of http://www.fcc.gov/oet/fccid after searching on FCC ID: Q78-MF193. How to Get Help You can get Help by:
Clicking Help on the software. Sending E-mail to mobile@zte.com.cn Visiting http://www.zte.com.cn Calling Service Hotline: +8675526779999 Confidential and Proprietary Information of ZTE CORPORATION 7