all | frequencies |
|
exhibits | applications |
---|---|---|---|---|
manual |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 2 3 |
|
WCDMA GSM GPRS User ManualV1 0 Canada 0910 | Users Manual | 1.14 MiB | / April 11 2008 | |||
1 2 3 | Test Report | / April 11 2008 | ||||||
1 2 3 | External Photos | / April 11 2008 | ||||||
1 2 3 | Internal Photos | / April 11 2008 | ||||||
1 2 3 | Test Setup Photos | / April 11 2008 | ||||||
1 2 3 | Cover Letter(s) | / April 11 2008 | ||||||
1 2 3 | Cover Letter(s) | / April 11 2008 | ||||||
1 2 3 | ID Label/Location Info | / April 11 2008 | ||||||
1 2 3 | RF Exposure Info | / April 11 2008 | ||||||
1 2 3 | RF Exposure Info | / April 11 2008 | ||||||
1 2 3 | RF Exposure Info | / April 11 2008 | ||||||
1 2 3 | RF Exposure Info | / April 11 2008 | ||||||
1 2 3 | Test Report | / April 11 2008 | ||||||
1 2 3 | ID Label/Location Info | / April 11 2008 | ||||||
1 2 3 | Test Report | / April 11 2008 |
1 2 3 | WCDMA GSM GPRS User ManualV1 0 Canada 0910 | Users Manual | 1.14 MiB | / April 11 2008 |
ZTE F165 Durable HSDPA 3G Mobile Phone User Manual 1 PC Software Requirements Join Me PC Software included supports Microsoft Vista, Windows 2000 with Service Pack 4 or Windows XP with Service Pack 2 only. 64 bit systems or MAC OS are not supported. Warnings and Safety Notices Please read all the safety notices before using this device Copyright 2007 ZTE Corporation All Rights Reserved. 1st Edition August 2007 No part of this publication may be excerpted, reproduced, translated or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without the prior written permission of ZTE Corporation. ZTE Corporation operates a policy of continuous development. ZTE Corporation reserves the right to make changes and improvements to any of the products described in this document without prior notice. Limitation of Liability ZTE shall not be liable for any loss of profits or indirect, special, incidental or consequential damages resulting from or arising out of or in connection with using this product, whether or not ZTE had been advised, knew or should have known the possibility of such damages. The user should refer to the enclosed warranty card for full warranty and service information. 2 Declaration We, ZTE Corporation, declared that:
The user is cautioned that changes or modifications not expressly approved by the manufacturer could void the users authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation. Do not attempt to disassemble the mobile phone by yourself. Non-expert handling of the devices may damage them. Your wireless phone is a radio transmitter and receiver. It is designed and manufactured not to exceed limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission (FCC) of the U.S. Government. These limits are part of comprehensive guidelines and establish permitted levels of RF energy for the general population. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons, regardless of age or health. The exposure standard for wireless fixed phoned employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limits set by the FCC are 1.6W/kg. Tests for SAR are conducted using standard operating positions accepted by the FCC with the phone transmitting as its highest certified power 3 level in all tested frequency bands. Although the SAR is determined at the highest certified power level, the actual SAR level of the phone while operating can be well below the maximum value. This is because the phone is designed to operate at multiple power levels so as to use only the power required to reach the network. In general, the closer you are to a wireless base station, the lower the output power. The Highest SAR Values for this model phone when tested for use on the left hand, touch cheek were 1.28W/g NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is 4 connected. Consult the dealer or an experienced radio/ TV technician for help. 5 Contents How to use your belt clip ............................................................................................... 9 RF Safety Information .................................................................................................. 12 General Safety Information .......................................................................................... 13 Support and Warranty Information ............................................................................. 14 Warranty Information ................................................................................................... 15 Key Layout .................................................................................................................... 16 Display Icons ................................................................................................................ 18 1. Getting Started .......................................................................................................... 19 Install the (U)SIM Card ..................................................................................... 19 Insert the Battery .............................................................................................. 20 Switch the Phone on and Connect the Charger ................................................ 21 Charging and Battery Life ................................................................................. 22 Basic Navigation .............................................................................................. 22 Enter Your Contacts ......................................................................................... 24 Edit Your Contacts to Change Ringtones and Groups ...................................... 26 Set Speed Dials ............................................................................................... 27 Make a Call ...................................................................................................... 28 Receive a Call .................................................................................................. 30 Send a SMS (Text Message) ............................................................................ 32 Emergency Calls .............................................................................................. 33 Notes on Text Modes, Predictive Text and Special Characters ......................... 34 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 1.10 1.11 1.12 1.13 6 1.14 1.15 1.16 1.17 1.18 1.19 1.20 1.21 1.22 1.23 1.24 1.25 2.1 2.2 2.3 2.4 2.5 2.6 2.7 2.8 2.9 2.10 2.11 2.12 2.13 Personalise Your Phone ................................................................................... 36 Using File Manager .......................................................................................... 42 Make a Video Call ............................................................................................ 45 Receive a Video Call ........................................................................................ 46 Set Alarms and Appointments .......................................................................... 47 Send an E-mail ................................................................................................. 49 Take Pictures and Videos ................................................................................. 50 Send a Multimedia Message (MMS) ................................................................. 52 Receive a Multimedia Message ........................................................................ 52 Browse the Internet using Rogers Vision .......................................................... 53 Game & Apps ................................................................................................... 54 Use your Phone as a Music Player (MP3 Player) ............................................. 54 Advanced Operation .......................................................................................... 57 Use Join Me to Connect your Phone to your PC .............................................. 57 Installing Join Me.............................................................................................. 58 Use Join Me to Copy your Pictures to your PC ................................................. 59 Use Join Me to Copy Music Files from your PC to your Phone ........................ 61 Enter your Contacts using Join Me ................................................................... 63 Copy Contacts from the phone to your PC (create a backup) .................... 64 Import your Contacts from Microsoft Outlook .................................................... 65 Use Join Me to Connect your PC to the Internet .............................................. 66 Connect to a Bluetooth Device ......................................................................... 68 Other Facilities ................................................................................................. 71 Advanced Message Settings ............................................................................ 76 Advanced Handset Settings ............................................................................. 78 Advanced Call Settings .................................................................................... 79 Technical Information and Help ........................................................................ 82 7 2 3 3.1 3.2 3.3 Troubleshooting and FAQs .............................................................................. 82 Glossary of Terms ............................................................................................ 84 Technical Parameters ....................................................................................... 85 Environmental Statement ................................................................................... 86 Menu Listing ........................................................................................................ 88 8 4 5 How to use your belt clip Please Note The handset will only fit one way into the belt clip. It clips in gently and does not need to be forced. The screen faces inwards to provide protection and to prevent the screen getting scratched. Do not force the handset the wrong way into the clip as this will mark the handset casing. How to insert your phone into the belt clip Hold the handset upright with the screen facing the inside of the belt clip. Insert the bottom of the handset into the bottom of the belt clip. Gently push the handset in towards the top clip to secure the handset. How to remove your phone from the belt clip Gently push the top lever towards the back of the belt clip. The handset will be released. 9 Insert the handset with the screen facing towards the back of the belt clip. Remove the handset by gently pressing the top lever. 10 Extendable Antenna The phone has an external antenna located on the top of the handset. To get maximum call quality and coverage you should extend the antenna whenever you make or receive a call. If you do extend the antenna, you should pull it out to its full extent. The antenna should not be left in the half way position during a call as call quality may be affected. 11 RF Safety Information The handset has an external antenna located on the top of the handset. For optimum performance with minimum power consumption always extend the antenna fully and do not cover it with your hand. Covering the antenna affects call quality, may cause the handset to operate at higher power level than needed, and may shorten talk and idle times. Radio Frequency Energy Your handset is a low-power radio transmitter and receiver. When switched on it intermittently transmits radio frequency (RF) energy (radio waves). The transmit power level is optimized for best performance and automatically reduces when there is good quality reception. Maximum power is only used at the edge of network coverage so under most circumstances the power output is very low. Under poor network conditions the phone will transmit at a higher power, may get hot and will have a significantly shorter battery life. Declaration of Conformity We declare under our sole responsibility that the product(s) detailed in this manual, and in combination with our accessories, conform with the essential requirements of The Radio Communications Standard (Electromagnetic Radiation Human Exposure) 2003 and the Australian Communications and Media Authority Section 376 of the Telecommunications Act 1997. Liquid Damage - Important Note The handset has a durable rubber shell but it is NOT waterproof and should not be immersed in any liquid. The unit contains liquid detecting stickers and liquid damage will be warranty void. Always close the charger and antenna port covers to maximise protection against liquid ingress. 12 General Safety Information The handset contains delicate electronic circuitry, magnets and battery systems. You should treat it with care and pay attention to the following points:
Handle the handset with care. Do not drop or stations, airports and hospitals. throw the handset down roughly. Do not immerse in any liquid. The handset contains a liquid detection sticker and the warranty will be voided by any liquid damage. Do not place the handset near computer disks, credit cards, and other magnetic media. The information contained on disks or cards may be erased or damaged. Do not leave the handset or battery in direct sunlight or near other heat sources where the temperature could exceed 45 C. Keep the handset, battery, charger and any other accessories away from children. In the unlikely event of a battery leak avoid contact with your eyes or skin. In the event of contact please flush thoroughly with water and consult a doctor. Observe and obey warning signs at petrol 13 The operation of some medical electronic devices, such as hearing aids and pacemakers, may be affected by the handset. Take care not to allow metal objects such as coins or keys to come into contact with the battery. Do not dispose of batteries in a fire. Do not throw used batteries into household rubbish, return them to a recycling point. (see Chapter 4) Do not connect the handset to any other chargers or cigarette lighter chargers. Only use the supplied charger. Be careful not to pierce the battery with sharp objects and do not use damaged batteries. Do not disassemble or modify the battery. Stop using the battery if abnormal heat, odour, discolouration, deformation, or abnormal condition is detected during use, charge, or storage. Do not put the battery in your mouth. Only use original batteries. Using any unauthorized battery may affect your handset performance or may cause danger of explosion, etc. Only use original replacement batteries. Do not attempt to dismantle the handset or any of its accessories. Do not place the handset close to the edge of a table in case it moves when set on vibrate mode. Do not put the handset into a microwave oven, dryer, or high-pressure container. Do not use your handset while driving or operating other machinery. Do not use the handset where blasting is in progress. Switch your phone off when boarding aircraft. Do not leave your handset at the bottom of a bag where it may be damaged by sharp objects. Do not leave the handset discharged or disconnected for a long time, otherwise your personal data may be lost. Remember to make backup copies of all important data on your handset Take care when your phone is in your pocket. Sitting down may damage the handset. It is normal for the handset to become warm while the battery is being charged. Under poor network conditions battery life is considerably reduced When the battery is thrown away cover the terminals with insulating tape. Please recycle the packaging and all parts as stated in Chapter 4. Please use original accessories or accessories that are authorized by ZTE. Support and Warranty Information For technical support please consult this manual and search our web site and FAQ section at 14 www.zte.com.au. Please do not call the warranty service line for general support enquiries. All calls for PIN number enquiries, Network problems, Rogers Next G Services, Web Access, Account and Billing Information, (U)SIM card registration and general enquiries should be directed to Rogers. Warranty Information The warranty does not apply to defects or errors in the product caused by:
(a) Reasonable abrasion
(b) Misuse including mishandling, physical damage, improper installation, unauthorized disassembly of the product
(c) Water or any other liquid damage
(d) Any unauthorized repair or modification
(e) Power surges, lightning damage, fire, flood or other events outside ZTEs reasonable control
(f) Use of the product with any unauthorized third party products such as generic chargers
(g) Any other cause beyond the range of normal usage for products. The End User shall have no right to reject, return, or receive a refund for any product from ZTE under the above-mentioned situations. 15 Extendable Antenna Earpiece LCD Left Select Key Back key Call key Long press the * Key to activate the key lock Microphone Key Layout Camera Arrow Keys
(Left/Right/Up/Down/OK) Right Select Key Clear key End / Exit and ON/OFF Key Long press the # Key to activate Meeting mode with vibrate 16 Key Layout Antenna port for connection to car kit Camera Volume Keys Camera Key Micro SD Port Left View Back View Charger, USB Port and Headset Jack Right View Notes Key lock is enabled by holding down the * Key. Long press the # Key to activate Meeting mode with vibrate. 17 Display Icons GPRS Network Signal Strength 3G Network Signal Strength New SMS or Multimedia Message New E-mail New Wap Push Message SMS or MMS Memory is Full E-mail Memory is Full Wap Push Message Memory is Full Roaming EDGE Network Signal Strength Alarm is set Secure Internet Sites Battery Level Indicator Missed Call Missed Video Call Divert All Calls is activated Silent Mode Vibrate mode enabled Headset Mode Headset and Vibrate Mode GPRS Attach PDP Context Established Bluetooth ON Low battery Level 18 1. Getting Started Install the (U)SIM Card 1.1 The (U)SIM card (Universal Subscriber Interface Module) is the small plastic chip with gold contacts supplied by Rogers. This contains your phone number and acts as a store for your contacts. It can be moved between different phones if required. Insert this face down into the carrier inside the back panel of the phone. Make sure it is pushed all the way down as shown below:
19 Insert the Battery 1.2 Insert the battery carefully with the contacts located against the gold springs in the handset. The battery will only fit one way. Close the case by locating the plastic cover into the grooves and sliding the cover up to close it. Do NOT force the cover down by pressing on it. This will damage the cover. Slide the cover up gently. 20 Switch the Phone on and Connect the Charger 1.3 Press and hold the key for two seconds to switch your phone on. The phone takes about 20 seconds to initialize. Enter the PIN number supplied by Rogers with your (U)SIM card. The start up screen below is referred to throughout the manual as the Idle Screen:
Insert the charger lead carefully with the plug arrow facing the top of the handset Charge Your Phone Open the charger port on the bottom of the handset and rotate the rubber cover to one side. The plug only fits one way. Do NOT use excessive force to insert the plug Check the plug is the right way round and lined up correctly and insert it gently. You can also charge your phone by connecting it to your PC using the USB data lead supplied. Please see the Advanced Section for more details on PC applications. 21 Charging and Battery Life 1.4 Only use the charger supplied. Normal charge time is 4-5 hours. When not using the phone for a long period, remove the battery and store it in a cool dry place. Do not leave the phone connected to the charger for more than 24 hours.. If the battery is not fully charged after 8 hours please stop charging. Charge the battery between 0C~50C. If the temperature of the handset is too high, switch it off and let it cool. Battery life can be maximized by regularly allowing the phone to fully discharge before recharging the battery. Charge the battery promptly when flat. Under poor network conditions (less than 2 bars) it is normal for the battery to only last 1 day. To maximize battery life, turn off Bluetooth and reduce the back lighting to 10 seconds (see Section 1.14 - Personalise your Phone). You can charge the phone in the ON or OFF state. In the OFF state you will see the Charging key for Battery animation. Remember to switch your phone ON after charging by holding the 2 seconds. 1.5 From the Idle Screen press the OK Key to access the Main Menu:
Basic Navigation 22 The Icon are described at the bottom of the screen OK Key Idle Screen Main Menu Arrow Keys Use the Arrow Keys for shortcuts to menus, to move around the Main Menu and to move the cursor Up (Shortcut to Friends) Left (Shortcut to Calls) Right (Shortcut to Messages) Down (Shortcut to Contacts) 23 Select Keys The two keys at the top of the keypad are called the Select Keys. The left and right Select Keys are used to choose the options from the bottom of the screen. In the above example the Left Select Key opens Vision and the Right Select Key launches Music. Back and Exit Keys key to go back one step or the Press the Screen. 1.6 There are several methods available to enter contacts into your phone. The Getting Started Section key to Exit to the Main Menu or the Idle Enter Your Contacts 24 deals with adding your contacts manually and copying contacts from a previous (U)SIM card. See the Advanced Section for adding contacts from your PC and importing contacts from Microsoft Outlook. All contacts can be stored in Groups for easy management. Adding Your Contacts Manually At the Idle Screen enter the phone number on the keypad and then press the Left Select Key to Save. Press the OK Key to Create New Contact. Add the persons name using the abc keys (see notes on entering text in section 1.13). Press the OK Key to Save. You can use the arrow keys to change the Contact type and Saving Location Copy Contacts from a previous (U)SIM Card Insert your old (U)SIM card. Switch the phone on and press the Down Arrow Key to enter Contacts Press the Right Arrow key once for (U)SIM to show the list of Contacts from your old (U)SIM card. Press Options, Copy, Copy all, press OK and then press Yes to confirm. Add a Contact from a Received or Dialled Call Number You can save a new contact from an incoming or dialled call number:
Press the The last call will be at the top of the list. key to bring up your All calls list. 25 Press the Right Select Key to Save the number. Enter the contact name, select the saving location and press the OK Key to Save. Add a Contact from a Received SMS (Text Message) You can save a Contact from a received SMS:
Press the OK Key and access your Messages Menu, and then go to your Inbox View the required message and select Options. Press Use highlight object to save the number. Choose New Contact to create a new contact from the received SMS number. Edit Your Contacts to Change Ringtones and Groups Searching Contacts You can search your contacts by pressing the letter keys that correspond to your contact name. Press OK Key and access Contacts menu (or press the Down Arrow Key) From the contacts list press the initial letter key to bring up the contacts associated with that letter. 1.7 Once you have added some contacts you can edit them to change the Group and to set a personalised Ring Tone. Contacts are normally stored in the default Group, Unclassified. You can move your contacts into other Groups: Mates, Family, Friends, Work, and VIP. Regardless of Group, all your contacts are displayed under All records. From the Idle Screen go to your Contacts list by pressing the OK KeyContacts or just press 26 the Down Arrow Key. Use the arrow keys to search and press OK to View the required Contact. Press OK to Edit the Contact. When you are in Edit mode you can assign a specific Group and change the Ringtone. Use the Down Arrow key to navigate through the menu. Use the Right Select Key to Modify the incoming Ringtone. Use the Left or Right Arrow keys to change Groups. Changing the Ringtone to a personalised tune will let you recognise key callers instantly by their unique tune. Set Speed Dials 1.8 Once you have entered some contacts you can assign speed dial keys to your chosen contacts:
Press OK Key and enter the Contacts menu. Use the Arrow Keys to scroll to the contact you wish to assign a Speed Dial Number. Press the Left Select Key for Options. Press 3 or scroll down to item 3 to Set speed dial. Assign your chosen contact to the next available number (1, 2 and 3 are preset and cannot be changed). Press the OK Key to Setup the speed dial (or to Cancel an existing speed dial). Press the key to exit when finished or the Back Key to choose another contact. 27 Make a Call Make a Call Using Speed Dial From the Idle Screen press and hold the required Speed Dial Key to make a call to that contact. E.g. A long press on the 1 key will automatically dial your voicemail number. 1.9 Extend the antenna completely to get maximum coverage and call quality. Dial the number manually If required press the * key twice for the International Prefix +. Enter the number on the keypad and press the When the call is connected you can press the OK Key for Handsfree mode. Press the key to make the call. key to end the call. Choose a number from your Contacts list Press OK Key and enter the Contacts menu. Use the Up/Down Arrow Keys to scroll to your chosen contact. Press the When the call is connected you can press the OK Key for Handsfree mode. key to make the call. 28 key to end the call. Press the Tip Call the number received in an SMS or E-Mail message If you receive an SMS or E-mail message with an embedded number you can easily call that number. Use the arrow keys to highlight the number then simply press the Call key
. Choose a number from your call list (received, dialled and missed calls) Press the Use the Up and Down Arrow Keys to scroll to the desired number (for last number redial select key to bring up your All Calls list. the top number). key to make the call. Press the When the call is connected you can press the OK Key for Handsfree mode. Press the key to end the call. Notes You can adjust the volume using the side Volume Keys. The microphone is at the bottom of the handset. Be careful not to block it with your hands. Press the Left Select Key for further options during a voice call. Use the Back key to return to the call menu. Hold: Puts the current call on hold. You can dial a third party. Press hold again to switch your two calls. End call: End the current call. 29 Record: Record the current call. The audio file will save to Tools-File Manager-Audios-My Audios. DTMF Off/On: Enable or disable sending DTMF tones. Default is ON. New Text Message: Send a new message during a call. Contacts: Switch to Contacts during a call. 1.10 When you receive an incoming voice call, the ring tone, illumination and vibrate function will activate Receive a Call
(depending on your current profile setting). Extend the antenna completely to get maximum coverage and call quality. to reject the call key or the OK key to answer. Press the Press the Right Select Key or the Press any other key to mute the incoming call (The ring is muted but the call is not answered) When an incoming call has been muted you can press the key or the OK key to answer. Notes:
When the headset is connected pressing the headset switch will answer the call. Always extend the antenna fully. If it is half extended call quality will be compromised. When you mute an incoming call it remains in the ringing state at both ends. This is useful in meetings etc. so you can view the caller details before deciding whether to answer the call. If you hang up the other party will know you have rejected the call but if you mute the incoming ring 30 you can let the call ring out without answering. 31 1.11 Send a SMS (Text Message) From the Idle Screen press the Right Arrow Key to open the Messages menu:
Press the OK Key to select New Message. Press the OK Key to select Text Message. Press the OK Key to select from your Contacts list or enter the number manually. Select the chosen contact and press the OK Key twice to enter your contact. Press the Down Arrow key twice to move the cursor into the text field. The default text mode is Predictive Text indicated by the En symbol for English (see 1.13) Enter your text by pressing the corresponding keys once for each letter you require eg 43556 for hello. Press Options to access My Words to add your own words to the Dictionary (see 1.13) To change into conventional abc text mode press the # key to toggle between En, 123, ABC and abc modes. Press Options to Save the message in Drafts. 32 Emergency Calls When completed, press the Right Select Key to Send your message. 1.12 Extend the antenna completely to get maximum coverage and quality. To make an emergency call during normal use 1 Ensure that your handset is switched on and in service. key repeatedly to clear the display and return to the Idle Screen. 2 Press the 3 Enter the emergency number for your present location using the keypad, (eg 000) 4 Press key to call the number. Follow instructions received and do not end the call until told to do so. To make an emergency call without a (U)SIM Card When the (U)SIM card is not inserted, enter the emergency number and press OK Key to make the call. or the Notes Tell the operator which service you require. Give your position and remain stationary with the antenna fully extended to get the best coverage. Due to the nature of the cellular system, the connection of emergency calls cannot be guaranteed. Never rely solely on any wireless device for essential communications like medical emergencies. 33 1.13 Your current text mode is indicated by En (predictive text), 123, ABC or abc displayed directly Notes on Text Modes, Predictive Text and Special Characters beneath the battery symbol. Use the # key to switch between different text modes En, 123, ABC and abc. In ABC or abc mode press the key with the required letter once for the first letter, twice for the second letter etc. Press and hold the key to enter the corresponding number. To insert a space press the 0 key. To delete letters press the Clear key. If the next letter is on the same key, wait until the cursor appears or press the Right arrow key to move the cursor on. Press the 1 key for common punctuation marks when in text modes Press the * key for special characters. Predictive text (En) is based on a built-in dictionary and generates words from the combination of letters pressed. In En mode press the letter keys once for each letter. For example to write set, press 738. In En mode when you finish writing the word and it is correct, press OK to confirm If the word is not correct use the * key to toggle between different available words and press OK to confirm or use My Words to add your own words to the dictionary In text input modes (eg SMS, MMS and E-Mail) you can add your own words to the built-in Dictionary which is called My Words. Press the Options key to access My Words 34 My Words From the text entry mode press the Options key and press OK for My Words
(The first time you use My Words press OK to add a new word) Press Right Select Key to Add a new word then press Ok to Save it. In My Words you can press the Options key to Edit or Delete words Unicode Characters and SMS Message Length The underlined characters in the above chart are Unicode Characters. This means that they are not part of the standard SMS character set and they require 2 SMS characters to transmit them. Normal SMS message length is 160 characters. If you exceed this the message will be sent by 2 SMS Messages. If you use any of the underlined characters in your message the message length is limited to 70 characters. If you exceed 70 characters then the message will be sent using 2 SMS messages. 35 Personalise Your Phone 1.14 There are many ways to change the look and feel of your handset such as changing the background screen (wallpaper) and choosing your own ring tone etc. Advanced options such as downloading your own music and picture files are dealt with in the Advanced Section of the manual and generally require a PC. Advanced users will be able to explore the menus and set their preferred options as all the menus are intuitive and self explanatory. Change the Background Screen (Wallpaper) From the Idle Screen press the OK Key for the Main Menu. Press the Down Arrow then the Right Arrow for Settings, press the OK Key. Press OK Key to select Wallpaper. This opens the File Manager area of the phone. Press OK Key to open the Photos folder, scroll down and press OK to open the Wallpapers folder. Choose a background screen from the available list and press Setting to confirm. Once you have your own pictures saved on the phone you can select these from the My Pictures folder, see the Advanced Section for more details. 36 Change your Ringtone From the Idle Screen press the OK Key for the Main Menu. Press the Down Arrow then the Right Arrow for Settings, press OK. Press the Right Arrow key twice to get to Profiles. Press the Right Select Key to Edit your current profile. Press the OK Key to modify the Voicecall/Videocall ringtone. Browse to Audios, Ring to see the available built in tones. In the advanced section you can download and choose your own music files as the ringtone. Lock the Handset From the idle screen press and hold the * key then press the Right Select Key to lock the handset. To unlock press the * key followed by the Right Select Key. Switch on Vibrate Mode - Long press the # Key to enable Meeting Mode From the Idle Screen press the OK Key for the Main Menu. Press the Down Arrow then the Right Arrow for Settings, press the OK Key. Press the Right Arrow key twice to get to Profiles. Press the Right Select Key to Edit the profile. Go to item 4 - Ringing type and press the OK Key to modify. Select the required mode and press the OK Key to confirm. Switch the Key Tones off From the Idle Screen press the OK Key for the Main Menu. 37 Press the Down Arrow then the Right Arrow for Settings, press OK. Press the Right Arrow key twice to get to Profiles. Press the Right Select Key to Edit the profile. Go to item 6 - Keytones and switch them off if you prefer to have silent keys. Change the Screen Brightness From the Idle Screen press the OK Key for the Main Menu. Press the Down Arrow then the Right Arrow for Settings, press OK. Go to item 3 - for Brightness. Use the Up and Down arrows to set your desired level. Mute the Handset with a Single Key Press You can mute your handset and switch it to Meeting mode with vibrating by pressing and holding the # key. Press and hold the # key to engage and disengage this mode. Change the Backlight Duration Reducing the backlight duration to 10 seconds can improve battery life. From the Idle Screen press the OK Key for the Main Menu. Press the Down Arrow then the Right Arrow for Settings, press OK. Go to item 2 for Set backlight duration. Set the desired time out for the backlight. Set the Owner name 38 The owner name is displayed on the Idle Screen. From the Idle Screen press the OK Key for the Main Menu. Press the Down Arrow then the Right Arrow for Settings, press OK. Go to 5) for Owner name. Type your name and press the OK Key to save. Set the Greeting The Greeting is displayed when you switch on the handset. From the Idle Screen press the OK Key for the Main Menu. Press the Down Arrow then the Right Arrow for Settings, press OK. Go to 6) for Greeting. Type your name or message and press the OK Key to save. Disable or change the PIN Number From the idle screen press the OK key for the Main Menu. Press the Down Arrow then the Right Arrow for Settings, Press the OK Key. Press the Right Arrow Key three times for Security. Press OK to select Activate Security Codes. Press OK to select PIN code. Switch On or Off and enter the PIN number to confirm. To change the PIN Number select Change Security Codes. Press OK to Select PIN code. Notes on PIN Codes 39 PIN Code 1 is provided by Rogers. PIN2 Code is an additional PIN associated with your (U)SIM card and is not normally used. Handset Lock is an additional PIN code used when you switch on the phone. If you forget your Handset Lock code your handset will need to repair and you will lose your content. It cannot be reset after it is locked. Fixed dial numbers and FDN list:
This function requires set-up and support from Rogers. If FDN is enabled on the (U)SIM card then only the phone numbers listed in the FDN list can be called. This function also uses PIN2. Please contact Rogers for more information. 40 Customise the Shortcut Keys From the Idle Screen you can press the Arrow Keys to access various menus. It is possible to change the shortcut keys to your own preference. The default options are shown below. Up (Shortcut to Friends) Left (Shortcut to Calls) Right (Shortcut to Messages) Down (Shortcut to Contacts) To change the shortcut keys From the Idle Screen press the OK Key for the Main Menu. Press the Down Arrow then the Right Arrow key for Settings, press the OK Key. Press the Right key for Handset Settings. Go to 5) for Shortcut Keys and make your preferred choices from the available list. This is just a small section of what can be customized. We encourage users to play with the phone to explore all the available menu choices. See the Menu Listing in the Advanced Section for the complete menu structure. 41 Using File Manager 1.15 All user files and downloaded content are stored in the File Manager section of the handset. Browse the folders to find all the user accessible files that are stored on the phone and on the T-Flash Card. From the Idle Screen press OK for the Main Menu, then press 2 or go to Media and press OK. Go to 3) for File Manager and press the OK Key to open the Phone File Manager menu. The Phone File Manager folder structure is:
Photos
My Pictures
Wallpapers Audios
Ring
My Audios Videos Contains the pictures taken on the handset Contains background screens for the handset Contains the pre-loaded Ring Tones Storage for your own Audio files (MP3 etc)
My Videos Contains the videos you take on the handset Downloaded Internet files, Bluetooth and MMS files Others NoteFor multimedia files such as recorder files, videos and photos, the default position is the TFlash card. If the TFlash card can not be found the files will be stored in handset at the position appointed by you and the save position will be the same next time. External Memory Your handset is equipped with a Micro SD card slot to expand the phones available memory up to 42 2GB. You can store images, videos, music files, voice data etc on your T-Flash card. From the Idle Screen press OK for the Main Menu then press 2 or go to Media and press the OK Key, Go to 3) for File Manager Press the OK Key to open the File Manager menu. Press the Right key to navigate to the External Memory. You can see all your folders and files that are stored on the card. Select a folder and press the Left select key for Options:
New folder: Create a new folder.
Delete: You can delete the selected folder.
Delete all: You can delete all the folders.
Rename: You can rename the selected folder.
Folder information: Show information about the selected folder.
Space information: Show the usage information of handset. 43 Press OK key [Select] to open a folder and select a file. Press Left select Key for Options:
Send: You can send the selected files via MMS, Email or Bluetooth
Move to: Move the selected file to other folder
Copy to : Copy the selected file to other folder.
Rename: You can rename the selected file.
Delete: You can delete the selected folder.
Delete all: You can delete all the folders.
Mark all files: Mark all the files in the folder.
File information: Show information about the selected folder.
Space information: Show the usage information of handset.
New folder: Create a new folder.
Press OK key [Open] to open the selected file. Press the Right select key [Mark] to mark the selected file and press the Right select Key
[Unmark] again to cancel the selection. Note: The handset only support the TFlash card with format of FAT, FAT32. TFlash card with NTFS format are not supportable by the handset. 44 1.16 Make a Video Call You need good quality 3G coverage to make and receive video calls. Enter the phone number using the keypad or from your Contacts list. Press the OK Key and select Video Call to dial out. Press If the call is not successful you will be asked if you want to try a voice to end the call. call instead. Press the Left Select Key for the following options during a video call:
Hold: Sends a still picture instead of your own image and the voice is muted. Start recording video: Records video reception from the other party (i.e. received video stream). Block my picture: Send a still picture instead of your own image. Use back camera: Take picture making use of the camera at the back of phone. Brightness: Adjust the brightness. Zoom: Change the magnification of your own image. Own picture off: Hide your picture. New text message: Send SMS during a video call. Contacts: Switch to Contacts. 45 1.17 Receive a Video Call You will only be able to receive a video call when you have good 3G coverage with at least 3 signal bars. If you are browsing or playing video or audio files then the browser or media player will be suspended in the background while you answer the video call. When the call has terminated you can resume your previous operation. When you receive an incoming Video call You will receive an incoming video call notification. Press the Call Key Press End Key to receive the video call. to end the video call. 46 Set Alarms and Appointments 1.18 Set Alarms From the main menu select Media>Tools>Time then scroll down to the Alarm menu. Press Add to create a new alarm. In the Setup alarm screen configure your alarm as required Daily Alarm goes off every day. Workday alarm goes off Mon Fri only. Weekly alarm will go off at the same time each week. Once Alarm will only go off once. Set your desired Ringtone by choosing the Edit button or selecting Edit alarm of Options in the Alarm screen above. Workdays are Mon Fri and can be changed by selecting Set rest days under Options in the 47 Alarm screen above. If the Alarm time has passed you will not be able to save it. Set Appointments through the Calendar If you use the Calendar function frequently we advise you to configure your short cut keys to enable quick access to the Calendar. See the Section 1.14 to change your shortcut keys. Otherwise you need to access the Calendar through the Tools. From the Idle Screen press OK for the main menu. From the main menu select Media>Tools>Time then press the Down Arrow Key to the Calendar menu Press OK to open it. Press the Right Select Key to Add. You can add a Meeting, Memo or Anniversary. The Memo function does not allow you to set an alarm. 48 Follow the prompts on screen to configure your appointment reminder If the Alarm time has passed you will not be able to save the appointment. 1.19 Send an E-mail From the Idle Screen press the Right Arrow Key to access Messages interface, then press Right Arrow key get to the E-Mail menu. Press OK to create a new E-mail. Enter the sender address e.g. username@domain.com When you are finished press the Right Select Key to Send. Press the down arrow to access the Copy To Field. Press the down arrow to access the Title Field. Press the down arrow to enter the Text field. Press the OK Key to Insert attachments. Email Settings Under Settings you should configure your own Email parameters. See the Advanced Section on how to do this. You can configure other Mailboxes (e.g. Gmail, Yahoo etc) to receive Emails from external addresses. See your E-mail provider for the POP Server details etc and see the Advanced Section for more information. 49 Take Pictures and Videos 1.20 Your phone has two cameras for still and video pictures. The main camera is on the back and the video camera is on the front to face you when make a video call. Take Still Pictures From the Main menu select Media>Multimedia then Camera You can choose the front or back cameras under Options Press the OK Key take a picture. Use the Up and Down arrows to control the zoom*
Press the Options button to:
Change the Photo Size* and orientation
Change the Quality
Change the Brightness
Change the Contrast
Apply an effect (black and white or sepia)
Change the camera shutter sound
Save to handset memory or TFlash Card
Camera change (front to back)
Go to other options (Video Camera, etc.)
* The default photo size is small to enable easy sending by MMS and Email. If you wish to view your pictures on a PC then change the picture size Max.1200 x 1600 by going into Camera, Options, Photo Size. Zoom is not available on 1280 x 960 as the screen is already at maximum resolution. Make Videos 50 From the Main Menu select Media>Multimedia Go down to option 2) for Video Camera. Press OK to Record your video. Press Options to change any of the following settings:
Video size (The default length of the video is only 15 seconds. Change this if required.)
Video Quality
Brightness
Contrast
Effect (normal, black and white or sepia)
Video sound
Video format, MP4 or 3GP
Save to handset memory or TFlash Card
Camera change (Use the front / back camera)
Switch to Camera (for still shots) 51 1.21 When you send a Multimedia Message you can attach a picture, music or video file. Send a Multimedia Message (MMS) From the Idle Screen press the Right Arrow Key to access the messages menu. Press OK to create a new message. Press the down arrow to access Multimedia message and press OK to Select. Enter the phone number or use Contacts to select a number. Enter text in the title field if required. Press the down arrow to enter the text field. When you are in the text field you can press the OK Key to Insert an Image, Audio or Video file. Browse to your photos, audios or video folder and select the file. 1.22 Receive a Multimedia Message When you receive a MMS you get a standard message alert. Press OK to View the message. If 52 required press Retrieve to download the message. When the message has downloaded press the Left Select Key for Options. Choose Use Highlight Object to Save the file. 1.23 The internet enables you to search and find useful and fun information and to enhance your phone by downloading ringtones, pictures, movie clips, videos and games.In idle screen press OK key twice to access the Vision menu. Browse the Internet using Rogers Vision Rogers Vision Menu Listing You can access the menu quickly by pressing the number keys: 1 for Video / Radio, 2 for Mobile TV, 3 for Rogers Music Player, 4 for Internet, 5 for Rogers Mall, 6 for Friends, 7 for MobileMail, 8 for Video Call and 9 for More Services. These services are regularly updated by Rogers, detailed information please consult your service provider. 53 1.24 There are various ways to enhance your phone by downloading content from the internet. Game & Apps Press the OK Key to access the Main Menu, select Games & Apps. Go to Downloads or Get New Application and press the OK Key to download the games or applications from the default website. Use your Phone as a Music Player (MP3 Player) 1.25 Once you have downloaded music or imported it from your PC (see 2.4) you can play your own music on your phone. Method 1, Use File Manager From the Main Menu select Media>Multimedia> File Manager. Press the OK Key for File Manager. 54 Go to the Audios directory, My Audios and open the desired music file. Method 2, Create a new Playlist and Operate your Music Player When you have some music files stored on your phone you can create a playlist to play your songs in the preferred order. Go to the Main Menu and choose Media>Multimedia. Use the Down Arrow key to select Playlist. Choose Add to create a new Playlist. Browse through the File Manager directory structure to get to your chosen files. Use the Mark button to select multiple tracks to create your playlist. Make sure you Save the playlist. Access your Playlist and Play your songs. Note When playing the file use the Right key to choose the next file, the Left key for the previous file. 55 Long press the Right Key to forward the file, and long press Left Key to rewind the file. 56 2 Advanced Operation Use Join Me to Connect your Phone to your PC 2.1 Join Me is a PC application that enables you to connect your phone to your PC. Once you have installed it you can connect your PC to the internet, copy music and picture files from your personal collection, and use your PC to enter and backup your contacts. Compatibility The software is only compatible with Windows XP Service Pack 2 and Windows 2000 SP 4 and Windows Vista but cannot be guaranteed to run on these systems. It is not compatible with Microsoft Vista 64 bit, ME, 98 or 95 or with any MAC OS. The software may not run in all PC environments, or in conjunction with other software. Multi-boot systems are not supported The software should be installed and run under the Administrator login Installation Please follow the installation steps carefully. If the installation fails please see the ReadMe file on the CD or consult our web site for more help. www.zte.com.au
*Windows 2000, Vista and Windows XP are registered trademarks of the Microsoft Corporation. 57 Installing Join Me 2.2 Please install Join Me from the CD before connecting your phone to your PC. Insert the CD provided into your PC. The CD should auto-start after a few seconds. The installation shield will launch and guide you through the install set up. Please follow the prompts to install the software. When the installation is complete plug your handset into your PC using the USB lead supplied. The USB lead is unique and should not be used for other devices (It is not the same as digital camera leads). When you plug in the handset the PC will automatically install the drivers. If this fails consult our website for more help or access Windows Device Manager to update the drivers. See www.zte.com.au for instructions. If you have plugged your phone into your PC before installing the CD then the drivers will not be installed correctly. Unplug your phone, un-install then re-install Join Me. Plug your phone back in and see if the drivers install. See www.zte.com.au for full instructions. 58 Use Join Me to Copy your Pictures to your PC 2.3 If you have taken some photos on your phone you can transfer them onto your PC using Join Me:
Make sure your phone is switched on and connected to your PC, and Join Me has been installed. Double click the Join Me icon on the desktop. Press Connect. The phone type will be selected automatically. Press OK to download your Contacts and Messages (you can switch this off under Tools, Settings). Go to the Media tab as shown in the picture on the next page. Double click on My Phone in the bottom left hand corner. Double click on Photos to expand the folder structure. Double click on My Pictures to see your picture files on the right hand side. Drag* the required file from the file list and Drop* it into the required destination folder on the PC. The file will be copied to your destination folder (Desktop in the example below). You can only drop files into Folders. The default picture size is very small when viewed on the PC. See section 1.20 to change the image size. Tip: * Drag and Drop is a method of copying files. Click on the file, hold down the left mouse button, move the mouse pointer to your required destination and release the left mouse button to Drop the file to that location. 59 1. Open the Media Tab in Join Me 2. Open the My Pictures folder on My Phone down the bottom of the screen. 3. Drag the picture from the file list up to a folder on your PC. 60 Use Join Me to Copy Music Files from your PC to your Phone 2.4 If you have MP3 files on your PC you can transfer them onto your phone using Join Me. Make sure your phone is switched on and connected to your PC, and Join Me has been installed. Double click the Join Me icon on the desktop. Press Connect. The phone type will be selected automatically. Choose OK to download your Contacts and Messages (you can switch this off under Tools, Settings). Go to the Media tab as shown in the picture on the next page. Double click on My Phone in the bottom left hand corner. Double click on Audios to open up the Audio folders. Find the MP3 files on your PC by browsing through the Windows file structure in Join Me. Drag the required file from the top half (on your PC) and drop it into My Audios on the phone. The file will be copied to your destination folder (as shown below). You can only Drop files into Folders. You can also Right Click on the file to choose Copy, and then go to your destination folder and Paste. MP3, WMA, AVI and MIDI Files are supported. Long file names are NOT supported. If the music file name is too long it will need to be renamed. You can use a program such as Free RIP (available free on the internet) to convert your CDs into MP3 files. 61 Copy your selected MP3 File from your PC to the My Audios folder on your handset. Use drag and drop or Right click on the file, select Copy and then paste it into the correct destination. 62 2.5 You can use Join Me to enter new contacts into your phone. Enter your Contacts using Join Me
. OOnn tthhee pphhoonnee bbooookk ttaabb yyoouu ccaann eenntteerr yyoouurr ccoonnttaaccttss ddiirreeccttllyy uussiinngg tthhee PPCC.. Select New Contact then complete the details. SSeelleecctt tthhee SSaavvee PPoossiittiioonn;;
LLooccaall,, PPhhoonnee oorr ((UU))SSIIMM The save position Local refers to the PC. Remember to change this if you want to save contacts directly to the handset or use the copy function to copy contacts from Local to Phone. 63 2.6 Copy Contacts from the phone to your PC (create a backup) SSeelleeccttAAllllbbyycchheecckkiinnggtthhiiss bbooxx..DDrraaggaannddddrroopptthhee ccoommpplleetteelliissttttooLLooccaall 64 Copy one or all of your contacts from Local to Phone using the same method Import your Contacts from Microsoft Outlook 2.7 Launch Outlook and have Join Me running and connected your handset Note At the end of the import process Outlook can shut down. Please save any information beforehand On the Phonebook tab in Join Me right click and select Import From Outlook The following fields are imported from Outlook to Join Me as below:
Outlook Full Name Mobile Telephone Number Home Telephone Number Business Telephone Number Company Main Telephone Number Other Telephone Number Company Name Profession Email Address Web Page Home phone Other mobile JoinMe Name Home mobile Work mobile Work phone Company Email Notes Web 65 Use Join Me to Connect your PC to the Internet 2.8 You can use your mobile phone as a dial up modem to connect your PC to the internet. The latest HSDPA wireless network technology achieves broadband speeds. Please see Rogers for a list of applicable data charges. For mobile phone, from the Main Menu select Settings>Handset, go to 6 for Modem Settings. Input Name, APN, Authenticate, Username, Password information (Besides name all other informations are provided by your service provider) Install and run the Join Me program as above and connect your phone In Join Me go to Tools, Settings on the top menu bar Select the Network Connection tab as shown below Enter *99# in the Dial Number item as below 66 The user name and password fields should be blank Press OK to save your changes You can now access the internet by going to the Internet tab and pressing Connect. Once you are connected launch Internet Explorer to browse the internet in the usual way. Notes:
Data charges can be quite high. Consult Rogers and connect to a plan if you require regular access. 67 Connect to a Bluetooth Device 2.9 Your mobile includes Bluetooth which can be used to connect your handset to wireless headsets and hands free car kits. You can also transfer files between your phone and other Bluetooth devices such as another phone or a laptop. Not all applications or devices can be supported as Bluetooth is an open forum and different manufacturers adopt different standards and implementation. As a guide we support Bluetooth 1.2 with Headset Profiles, Serial Port Profile, OBEX and Advanced Audio Distribution Profile(A2DP), which supports stereo audio transmission. We also support FTP for file transfer to a PC or to another device. All manufacturers use different methods of implementation so it is best to consult your device manufacturer for compatibility and connection issues. Please follow the process carefully as it can seem tricky to connect to a Bluetooth device first time around. Once you have paired up and connected to a device the process becomes more automatic. Connect to a Bluetooth Mobile or Laptop Device 68 From the Main Menu select Media>Tools. Scroll down to Bluetooth and press OK to select. Press OK for the Bluetooth Manager then press the Left or Right Arrow Key to switch Bluetooth on. Go down then press the Left or Right Arrow Key to Show. Press OK to confirm. Go down to My Devices and press OK. Press Search to look for Bluetooth devices. Your chosen device must be switched on and in pairing mode. You should see the required device listed in the Device List, Press OK to Connect. You will be asked to submit a password. Usually 0000 or 1234, consult your device for more information. If you are connecting to a PC or another mobile enter the same password when requested by that device. Once the password has been shared and accepted by both devices they are paired and connected. Use Bluetooth to Transfer Files to a PC or another mobile device From the main menu go to Media> File Manager Browse through the folders to your chosen file Press the Left Select Key for Options. 69 Choose Send then Select Bluetooth and press the OK Key If no devices are shown press Search. Select the device you wish to send your file to. Enter a pass code (if requested) and use the same pass code on the other device (eg 0000) Note: The files in the folder Wallpapers, and Ring cant be sent via Bluetooth. Receiving Files from Another Device If another paired device tries to send a file to your phone this dialogue will appear. Press Yes to accept the incoming file transfer.
Connecting to a Bluetooth Car Kit or Personal Headset Please follow the manufacturers instructions carefully regarding getting your Bluetooth device into Pairing Mode. You cannot connect your phone to the far end device unless Pairing Mode is enabled. Usually the device will flash rapidly to indicate pairing mode. After finding the device you need to share a password and press Connect. Make sure Bluetooth is on and in Show mode and the other device in is Pairing Mode. 70 From your handset go to the Bluetooth menu and press the OK Key to open My Devices. Press the Right Select Key to Search. From the list of available devices move the cursor to the required device and press OK to Connect. Enter the pass code specified in the user guide of your far end device (Usually 0000 or 1234). The far end device will acknowledge the connection and your handset will report the device has been added. In My Devices go to your new device and press the OK Key to Connect. The devices are now paired. When you get an incoming call this will be sent to your Bluetooth device automatically, press the call button to answer. Use the Call button on your Bluetooth device to activate Last Number redial. The phone will automatically dial out the last number. Other Facilities 2.10 Stopwatch The phone has a built in stopwatch accessible through the Media> Tools>Time menu. Press OK Key to start timing. Press OK Key to stop timing. The screen will show the event time. Press OK Key to continue timing. Press Right Select Key to reset. 71 Calculator The phone provides a simple calculator accessible through the Media> Tools>Others menu. Press 0~9 key to enter numbers, Decimal to enter the decimal point. Press Up/Down/Left/Right key to choose +, , , . Press the Clear key to clear last digit and results. Press OK Key to Calculate. Press End key or Back to exit the calculator. World Time World Time is accessible through the Media> Tools>Time menu.
The world time function provides time information on major cities worldwide. You can scroll to the desired city by using the Left/Right arrow keys. Select your city and then press the OK Key to save the selected city as your home time zone. Note changing time zones changes the current time setting. 72 Java Games
You can download games from your service provider or other specialist portals. Your handset supports Java Midlet 2.0 You can also download files onto your PC and use Join Me to copy them over Copy Games into the Other directory then select Open to install the game Games are installed in the Games & Apps location on the handset Browser You can access a generic Browser through the Main Menu The home page is GoRogers You can enter your own URL using the Go To option You can view your internet History and connection records You can create a new connection profile under Connect Setting in Options. You can Erase and Set Cookies and Other Options under Options
73 WAP Push Messages
WAP Push Messages are indicated by the Icon on the main Voice Recorder display Use the Browser to view your Push Messages Push Messages are usually advertising or spam. They cost money in data charges to retrieve the messages. You can set Refuse to Receive under Browser, Options, Push Settings. Access the Voice Recorder function from the Media>Multimedia directory. Press OK Key to Start recording your voice memo. Press OK Key to Pause/Contin. recording. Press Right Select Key to stop recording. You can save by pressing the OK Key. The file will be saved to My Audio folder. Press Right Select Key to Discard the voice memo.
74
Press Left Select Key to Send the memo via MMS or E-mail or Bluetooth. Slide Show Access the Slide Show function from Media>Multimedia directory. Add pictures by pressing Add Browse to My Pictures and Mark the pictures you want. Press OK to finish, press Edit and then Save. Use Options to Create new slide, Rename, Delete, Delete all, and View the image Info.
Streaming URL Streaming URL are links to audio or video streaming content available through the browser. The streaming content is only available while you are connected to the server and depends on your network provider.
Press Add to add a new streaming URL. Enter title and URL address etc. Press Options for the submenu:
New Bookmark: Create a new bookmark. Send: Send the URL address as a message or E-mail. Delete: Delete the address etc. 75 Delete all: Delete all URL addresses. Info: View title and URL address.
2.11 You can configure your SMS, MMS and Email Settings. From the Main Menu, go to Messages and Advanced Message Settings Settings. Multimedia Message Settings
Retrieval Settings: Manual, Automatic or Manual when roaming Delivery mode: You can set immediate delivery or defer. Delivery time: You can set delivery time of deferring for a specified period of time. Time per page: Set MMS time per page.
Delivery report: You receive a confirmation from the network when the message is delivered to the recipient. Validity: Messages are saved on the network for this period or until the message is delivered. Anonymous msg: You can choose to accept or refuse anonymous messages. Connections:
PUSH Message: This function is an application of WAP PUSH. It shows a list of all the push messages delivered to your browser and will guide you to access WAP site. Tips: *Changing these settings will affect you receiving and sending multimedia messages. 76
*This function depends on your service provider. Text Message Settings
SMS centre number: Your service provider presets the service center number for you. Expiration Time: Select the period over which the message centre will attempt to deliver the message. Delivery report: On or Off. If you select On, the network informs you when your message has been delivered.
Template Setting
There are 10 templates for SMS / MMS in your phone and you can edit them. Mailbox Settings From the Main Menu go to Messages then press the Right Arrow key to go to the Email tab. Go to 7) for Settings, press the OK Key. Press OK key again for Mailbox Settings. Press the Right Select key to Edit the selected mailbox settings. Edit your username, password, full E-mail address, Display name etc. for the selected mailbox settings. To create your own mail box settings use Add from the Mailbox Settings menu. 77 See the table on the next page for some common examples. Consult your E-mail service provider for more details. Other Email Providers We only support POP3 and SMTP email clients. We do not support SSL. Contact your alternative E-mail provider for more details on how to configure your POP service. 2.12 From the Main Menu go to Settings then press the Right Arrow Key for Handset Settings. Advanced Handset Settings Network Settings
Preferred mode: You can lock your phone to GSM or UMTS. Default is automatic Preferred selection: You can specify which network to register with from a list of available networks. Access Point Settings
The default Access point is Rogers Internet and Rogers MMS. Only change these settings if instructed by Rogers. The Username and Passwords are blank and are not required to connect.
Restore Default Settings
If your handset is not working as normal you can restore the handset to its default factory 78 settings. The Handset Lock Code is 0000. Network Time
The Time and Date automatically updates from the Network. In some border areas the handset will pick up a neighbouring cell and change this to the wrong time zone. Disable this if required. 2.13 From the Main Menu go to Settings then press the Right Arrow Key 4 times for Call settings Advanced Call Settings Videophone setting The following fields are preset by Rogers.
The VIG Number
The UUS Type is Email
The UUS String is blank Contact Rogers for more details Voice Mail
Your Voice mail number is preset by your Rogers. Your Video mail number is preset by your Rogers. Video Mail
Call Divert 79 This service enables you to divert incoming calls to other numbers. Use the menus to choose which diverts you want activated and to check the status of your diverts. Call Waiting If Call Waiting is active on your account and you are on the phone you will hear some pips when you get another incoming call. Press the button to switch between calls. Call Barring You may need to contact Rogers to get this enabled on your account and you will need the network password. This is provided with your (U)SIM card documentation, usually 1234. Bar all outgoing calls: Calls cannot be made. Bar outgoing calls (international): International calls cannot be made. Outgoing international calls except for calls to the home country: When abroad international calls can only be made to numbers to your home country. Bar all incoming calls: Calls cannot be received. Bar incoming calls when international roaming: Calls cannot be received when you are overseas Cancel all call barring: Cancel all the previous call barring settings. Change password: Change the barring password. It is needed when you activate or erase call barring. Select Activate/Deactivate to enable/disable the function Select Check status to query the current status of the function. 80 Send my Number This function allows you to send or hide your number when making calls. You can choose to have it set by the network or switch it on or off. 81 3 Technical Information and Help Troubleshooting and FAQs 3.1 Please check the manual thoroughly before contacting your service provider and read the issues below:
Symptom Enter PIN Resolution Input the correct PIN number as supplied by Rogers. See section 1.3 Insert (U)SIM Enter password or Unlock Code
(No) key tone when pressing keys No incoming ring tone No alarm tone A phone number cannot be dialled Short message cannot be sent Check you have inserted a valid (U)SIM card. See Installing the
(U)SIM Card. Try another card if available. Enter the unlock code. Default is 0000. See Settings, Security Check the key tone settings in your current profile. See section 1.14 Check the ring tone and ringing volume settings in the profile. Check the handset is not muted (Long press the # Key) Check the profile setting (silent) and the alarm ring setting Check whether any call restrictions are set. See Advanced Call Settings Check the SMS centre setting in the SMS-Settings menu. Restore Defaults 82 How do I switch off Predictive Text ?
The battery discharges quickly How do I enter text in an SMS ?
How do I change the Ringtone ?
How do I transfer pictures via Bluetooth to a photo printer (eg Kodak) ?
In any text entry mode press the # key to toggle between different modes. Your Network coverage is poor. Check your signal bars. With only 1 or 2 bars the network is poor. Battery life of only 1 day is normal under these conditions. Switch off Bluetooth to help save power. Try changing network to GSM (2.11) From the phone number field press the Down arrow twice to move into the text area. Use predictive text to complete words, press the * key to toggle different words, press OK when correct. Use abc mode to manually type words that are not included. See Section 1.14 Edit the current profile and select a new tune from the Audios directory. This is not supported. Your handset requires a security password to be enabled and the Kodak printers cannot provide a password. This is due to different Bluetooth profiles. Copy your photos using Join Me. 83 Glossary of Terms 3.2 2G or GSM Second Generation wireless communication system. 3G Third Generation wireless communication system. 3G offers video services and high speed packet-data service. APN Access Point Name. This is the gateway to Internet Services Avatar is a small bit-map cartoon style picture Bluetooth is a wireless standard to allow devices to connect and share information without using any cables HSDPA High Speed Digital Packet Access. Wireless data rates up to 14.4Mbps MMS Multimedia Message Service. Send videos, pictures, audio files and text to phones and e-mail addresses. Next G Also called 3.5G. Next G offers enhanced data rates and features using HSDPA technology Pairing Mode is a Bluetooth facility to connect two devices together Roaming Use of your phone overseas.
(U)SIM Universal Subscriber Identity Module provided by Rogers. Can be used to copy Contacts between handsets. UMTS Universal Mobile Telecommunications System Video Call Allows users to communicate by video instead of normal voice calling. Only available on 3G. Voice/Video Mail An answering service that automatically answers your calls when you are not available. 84 3.3 Handset Standards Technical Parameters Dimensions LWH Weight Features WCDMA 850MHz, 1900MHz with HSDPA data, 850MHz GSM, 1900MHz GSM with UMTS Approx 117mm 51mm 16mm Approx 120g (Including standard battery) MP4 video, MP3 audio, 2.0MPixel camera, Video Phone, USB connectivity, MIDP 2.0 JAVA 225MHz Processor, TFT 262K Colour Screen, MMS Video and Picture, E-mail, Calendar, Speakerphone, Voice Recorder, Bluetooth 1.2. 1300mA hours, Lithium ion (Li-ion) 250 hours in GSM mode, 200 hours in WCDMA mode. Battery Continuous idle time*
Continuous talk time* 250 minutes on GSM network, 200 minutes on WCDMA network, Video call 120 minutes Approximately 5 hours Approximately 400 charge cycles. Charge time Battery Life Tips: * The phones talk time and idle time are based on ideal working environments. The use of extended backlighting, browser, and network conditions can reduce battery life and talk/idle time. 85 4 Environmental Statement Your ZTE handset is made using the latest manufacturing techniques and environmental standards to reduce waste and hazards to the environment. However at the end of life of the equipment the manufacturer recommends that you return the handset and accessories to your nearest re-cycling depot or send it to our recycling agent below. Valuable materials such as gold, silver, and copper can be recovered from the handset. Any toxic materials will be prevented from entering the environment and the waste materials will be recycled. At the end of life of the equipment please send your handset, batteries and charger to:
MRI (Australia) Pty Ltd 20-24 Dennis St Campbellfield VIC 3061 www.mri.com.au MRI Sydney 1 4 Bentley Street Wetherill Park NSW 2164 or MRI Australia recycles every part of the equipment and diverts over 90% of the materials from landfill for re-use. 86 Key 1 2 3 4 5 6 7 8 9 0
* key
# key Up/Down key Left/Right key End key Character Chart Corresponding Characters 1 and some common punctuation characters eg . , ? ! @
ABCabc2 DEFdef3 GHIghi4 JKLjkl5 MNOmno6 PQRSpqrs7 TUVtuv8 WXYZwxyz9 Space 0 Press * key for character set. Press twice for International Prefix +
Toggle different text modes. Long press to activate Silent Mode Move the cursor up/down. Move along Tabs Move the cursor left/right. Toggle various options Exit 87 5 Menu Listing B. Tools 1 Rogers Mall 2 Media A. Multimedia
Camera
Video camera
Media player
Voice recorder
Playlist
Slide show
Streaming URL 5 Vision A. Video/Radio B. Mobile TV C. Rogers Player D. Browser 1) GoRogers 2) Goto URL 3) Bookmarks 4) History Music 1) Connect
Bluetooth 2) Time
Alarm
Calendar
Stopwatch
World Time 3) Others
Calculator
Currency Conversion 5) Page memo 6) Push message 7) Options
Connect setting
View
HTTP setting
Certificates
Push setting
Browser mode C. File Manager 1) Phone
Photos
Audios
Videos
Others 2) External Memory 3 Games & apps
Get New Game
Get New Application
Background music E. Rogers Mall F. Friends G. MobileMail H. Video Call I. More Services 4 Calls A. Call log
All calls
Missed calls
Received calls
Dialled calls B. Call info
Call duration 6 Messages A. Message
New message
Inbox
Outbox
Drafts
Sent
User folders
(U)SIM Inbox 88
Settings
Memory info B. E-mail
New E-mail
Inbox
Outbox
Drafts
Sent
User folders
Settings
Memory info 7 Browser A. GoRogers B. Goto URL C. Bookmarks D. History E. Page memo F. Push message G. Options H. I. J. K. Connect setting View HTTP setting Certificates
Push setting
Browser mode
Background music 8 Contacts
All
(U)SIM
Mates
Family
Friends
Work
VIP
Unclassified 9 Settings A. Screen
Wallpaper
Set backlight duration
Set brightness
Keyboard light
Owner name
Greeting B. Handset
Language
Time and date
Network
Missed Call Tone
Shortcut keys
Keylock
Own phone number
Download location
Network settings
Access point Settings
Modem setting
Connect
PC connection
Restore default settings
Network time C. Profiles
General
Meeting
Outdoor
Silent D. Security
Activate codes security
Change security codes
Fixed dial numbers
FDN list E. Call
Videophone
setting
Voice mail
Video mail
Call divert
Call waiting
Call barring
Send my number 89 Index Access Point Settings . 80 Advanced Operation ... 58 Appointments .............. 47 Background ................. 36 Backlight Duration ....... 38 Battery .................. 20, 22 Bluetooth............... 70, 72 Bluetooth Car Kit ......... 72 Browse the Internet ..... 54 Browser ...................... 75 Calculator .................... 74 Calendar ..................... 48 Call ....................... 28, 30 Call Barring ................. 82 Call Divert ................... 82 Call Waiting ................. 82 CD .............................. 59 Change Ringtones ...... 26 change the PIN Number ....................... 39 Character Chart .......... 89 Charger ...................... 21 Charging ..................... 22 Contacts ............... 24, 26 Declaration ................... 3 dictionary .................... 34 E-Mail ......................... 49 Emergency Calls ........ 33 En ............................... 32 Environmental ............ 88 FAQs ......................... 84 Games........................ 55 Glossary ..................... 86 Greeting ..................... 39 Groups ....................... 26 Handsfree ............. 28, 29 Java Games: .............. 75 Join Me ................. 58, 59 Key Tones .................. 37 Make Videos ............... 51 Menu Listing ............... 90 Microsoft Outlook ....... 67 MP3 Player ................. 56 Multimedia Message ... 53 Music Player ............... 56 Mute ........................... 38 My Words ................... 35 Network Settings ......... 80 Network time ............... 81 Owner name ............... 39 PC ............ 59, 60, 63, 68 PIN Codes .................. 40 Predictive Text ............ 34 Preferred mode ........... 80 Preferred selection ...... 80 Push Messages .......... 76 Radio Frequency Energy ........................ 12 Restore Default Settings ....................... 81 RF Safety Information . 12 Ringtone ..................... 37 Rogers Vision ............. 54 90 Safety Information ....... 13 Screen Brightness ....... 38 Select Keys ................. 24 Set Alarms................... 47 Shortcut Keys .............. 41 Silent Mode ..... 18, 37, 89 Slide Show .................. 77 SMS ............................ 32 Speed Dial .................. 27 Stopwatch ................... 73 Streaming URL ........... 77 Take Pictures .............. 51 Technical Parameters . 87 Troubleshooting .......... 84 USB ............................ 21 USIM card .................. 19 Vibrate Mode .............. 37 Video Call ................... 45 Video Mail ................... 81 Videophone setting ..... 81 Voice Mail ................... 81 Voice Recorder ........... 76 Wallpaper .................... 36 WAP ............................ 76 Warranty ..................... 15 Workdays .................... 48 World Time .................. 74 91
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2008-11-04 | 1852.4 ~ 1907.6 | PCE - PCS Licensed Transmitter held to ear | Original Equipment |
2 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | ||
3 | JBP - Part 15 Class B Computing Device Peripheral |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 2 3 | Effective |
2008-11-04
|
||||
1 2 3 | Applicant's complete, legal business name |
ZTE Corporation
|
||||
1 2 3 | FCC Registration Number (FRN) |
0009043175
|
||||
1 2 3 | Physical Address |
ZTE Plaza, Hi-tech Park, Nanshan District
|
||||
1 2 3 |
Shenzhen, Guangdong, N/A 518057
|
|||||
1 2 3 |
China
|
|||||
app s | TCB Information | |||||
1 2 3 | TCB Application Email Address |
h******@atcb.com
|
||||
1 2 3 | TCB Scope |
B1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 (below 3 GHz) & 27
|
||||
1 2 3 |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
|||||
1 2 3 |
A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
|
|||||
app s | FCC ID | |||||
1 2 3 | Grantee Code |
Q78
|
||||
1 2 3 | Equipment Product Code |
ZTEF165
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 2 3 | Name |
Y**** X****
|
||||
1 2 3 | Title |
Product Certification Manager
|
||||
1 2 3 | Telephone Number |
0086-********
|
||||
1 2 3 | Fax Number |
0086-********
|
||||
1 2 3 |
x******@zte.com.cn
|
|||||
app s | Technical Contact | |||||
1 2 3 | Firm Name |
TMC of Ministry of Information Industry
|
||||
1 2 3 | Name |
C****** S******
|
||||
1 2 3 | Physical Address |
No. 52, Huayuan Bei Road, Haidian District
|
||||
1 2 3 |
Beijing, 100083
|
|||||
1 2 3 |
Beijing
|
|||||
1 2 3 |
China
|
|||||
1 2 3 | Telephone Number |
86-62********
|
||||
1 2 3 |
+86-6********
|
|||||
1 2 3 | Fax Number |
86-10********
|
||||
1 2 3 |
+86-1********
|
|||||
1 2 3 |
x******@emcite.com
|
|||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 2 3 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 2 3 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 2 3 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 2 3 | Equipment Class | PCE - PCS Licensed Transmitter held to ear | ||||
1 2 3 | DSS - Part 15 Spread Spectrum Transmitter | |||||
1 2 3 | JBP - Part 15 Class B Computing Device Peripheral | |||||
1 2 3 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | WCDMA/GSM/GPRS Mobile Handset | ||||
1 2 3 | WCDMA/GSM/GPRS Mobil Handset | |||||
1 2 3 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 2 3 | Modular Equipment Type | Does not apply | ||||
1 2 3 | Purpose / Application is for | Original Equipment | ||||
1 2 3 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | Yes | ||||
1 2 3 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 2 3 | Grant Comments | This device contains functions that are not operational in U.S. Territories. This filing is only applicable for Licensed operations. Power Output is ERP for Part 22 and EIRP for Part 24. SAR compliance for body-worn operating conditions is limited to the specific configuration tested for this filing. Body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 15mm separation between the device and the users body. End users must be informed of the body worn requirements for satisfying RF Exposure compliance. The highest reported SAR values are: Part 22: Head: 0.805W/kg; Body-worn: 0.824W/kg; Part 24: Head: 1.28W/kg; Body-worn: 0.937W/kg | ||||
1 2 3 | Power Output is Conducted. End-users must be provided with specific operating instructions for satisfying RF exposure compliance | |||||
1 2 3 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 2 3 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 2 3 | Firm Name |
TMC-Telecommunication Metrology Center of M.I.I.T
|
||||
1 2 3 | Name |
C******** S******
|
||||
1 2 3 | Telephone Number |
0086-******** Extension:
|
||||
1 2 3 | Fax Number |
0086-********
|
||||
1 2 3 |
s******@emcite.com
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 22H | BC | 824.2 | 848.8 | 1.24 | 0.03 ppm | 300KGXW | |||||||||||||||||||||||||||||||||
1 | 2 | 22H | BC | 824.2 | 848.8 | 1.22 | 0.03 ppm | 300KG7W | |||||||||||||||||||||||||||||||||
1 | 3 | 22H | BC | 824.2 | 848.8 | 0.93 | 0.03 ppm | 300KG7W | |||||||||||||||||||||||||||||||||
1 | 4 | 24E | BC | 1850.2 | 1909.8 | 0.31 | 0.02 ppm | 300KGXW | |||||||||||||||||||||||||||||||||
1 | 5 | 24E | BC | 1850.2 | 1909.8 | 0.27 | 0.02 ppm | 300KG7W | |||||||||||||||||||||||||||||||||
1 | 6 | 24E | BC | 1850.2 | 1909.8 | 0.25 | 0.02 ppm | 300KG7W | |||||||||||||||||||||||||||||||||
1 | 7 | 22H | BC | 826.4 | 846.6 | 0.09 | 0.04 ppm | 4M50F9W | |||||||||||||||||||||||||||||||||
1 | 8 | 24E | BC | 1852.4 | 1907.6 | 0.04 | 0.02 ppm | 4M50F9W | |||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
2 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0004000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
3 | 1 | 15B | CC |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC