| all | frequencies |
|
exhibits | applications |
|---|---|---|---|---|
| manual |
| app s | submitted / available | |||||||
|---|---|---|---|---|---|---|---|---|
| 1 |
|
Manual Rev 3 | Users Manual | 443.43 KiB | September 02 2007 | |||
| 1 | Cover Letter(s) | September 02 2007 | ||||||
| 1 | Cover Letter(s) | September 02 2007 | ||||||
| 1 | Cover Letter(s) | September 02 2007 | ||||||
| 1 | Cover Letter(s) | September 02 2007 | ||||||
| 1 | External Photos | September 02 2007 | ||||||
| 1 | Internal Photos | September 02 2007 | ||||||
| 1 | ID Label/Location Info | September 02 2007 | ||||||
| 1 | RF Exposure Info | September 02 2007 | ||||||
| 1 | RF Exposure Info | September 02 2007 | ||||||
| 1 | Test Report | September 02 2007 | ||||||
| 1 | Test Setup Photos | September 02 2007 | ||||||
| 1 | Cover Letter(s) | September 02 2007 |
| 1 | Manual Rev 3 | Users Manual | 443.43 KiB | September 02 2007 |
1 ZXMBW TP25I WiMAX Wireless Data Card User Manual Version 1.0 ZTE CORPORATION ZTE Plaza, Keji Road South, Hi-Tech Industrial Park, Nanshan District, Shenzhen, P. R. China 518057 Tel: (86) 755 26771900 800-9830-9830 Fax: (86) 755 26772236 URL: http://support.zte.com.cn E-mail: doc@zte.com.cn Confidential and Proprietary Information of ZTE CORPORATION LEGAL INFORMATION Copyright 2006 ZTE CORPORATION. The contents of this document are protected by copyright laws and international treaties. Any reproduction or distribution of this document or any portion of this document, in any form by any means, without the prior written consent of ZTE CORPORATION is prohibited. Additionally, the contents of this document are protected by contractual confidentiality obligations. All company, brand and product names are trade or service marks, or registered trade or service marks, of ZTE CORPORATION or of their respective owners. This document is provided as is, and all express, implied, or statutory warranties, representations or conditions are disclaimed, including without limitation any implied warranty of merchantability, fitness for a particular purpose, title or non-infringement. ZTE CORPORATION and its licensors shall not be liable for damages resulting from the use of or reliance on the information contained herein. ZTE CORPORATION or its licensors may have current or pending intellectual property rights or applications covering the subject matter of this document. Except as expressly provided in any written license between ZTE CORPORATION and its licensee, the user of this document shall not acquire any license to the subject matter herein. The contents of this document and all policies of ZTE CORPORATION, including without limitation policies related to support or training are subject to change without notice. Revision History Date Revision No. Serial No. Reason for Revision 09/26/2006 R1.0 sjzl20061647 First Edition 2 3 ZTE CORPORATION Values Your Comments & Suggestions!
Your opinion is of great value and will help us improve the quality of our product documentation and offer better services to our customers. Please fax to: (86) 755-26772236; or mail to Documentation R&D Department, ZTE CORPORATION, ZTE Plaza, A Wing, Keji Road South, Hi-Tech Industrial Park, Shenzhen, P. R. China 518057. Thank you for your cooperation!
Document Name ZXMBW TP25I WiMAX Wireless Data Card User Manual Product Version V1.0 Equipment Installation Date Document Revision Number R1.0 Presentation:
(Introductions, Procedures, Illustrations, Completeness, Level of Detail, Organization, Appearance)
Good Fair Average Poor Bad N/A Your evaluation of this documentation Accessibility:
(Contents, Index, Headings, Numbering, Glossary)
Good Fair Average Poor Bad N/A Intelligibility:
(Language, Vocabulary, Readability & Clarity, Technical Accuracy, Content)
Good Fair Average Poor Bad N/A
Make it more concise/brief
Add more step-by-step procedures/tutorials
Add more troubleshooting information
Make it less technical
Add more/better quick reference aids
Improve the index Please check the suggestions which you feel can improve this documentation:
Improve the overview/introduction
Improve the Contents
Improve the organization
Include more figures
Add more examples
Add more detail
Other suggestions __________________________________________________________________________ __________________________________________________________________________ __________________________________________________________________________ __________________________________________________________________________ __________________________________________________________________________
# Please feel free to write any comments on an attached sheet. Your suggestions for improvement of this documentation If you wish to be contacted regarding your comments, please complete the following:
Name Postcode Telephone Company Address E-mail Confidential and Proprietary Information of ZTE CORPORATION This page is intentionally blank. Contents About this Manual ............................................................. i Purpose ................................................................................ i Intended Audience ................................................................. i Prerequisite Skill and Knowledge .............................................. i What is in This Manual............................................................ i Conventions ................................................................... ii Typographical Conventions..................................................... ii Mouse Operation Conventions................................................ iii Safety Conventions .............................................................. iii How to Get in Touch ....................................................... iii Customer Support................................................................ iv Documentation Support ........................................................ iv Caution .............................................................................. iv Chapter 1.......................................................................... 1 Safety Instructions .......................................................... 1 Personal Safety...............................................................2 DATA CARD Safety ..........................................................2 Precautions ....................................................................3 Chapter 2.......................................................................... 5 Data Card Overview......................................................... 5 Brief Introduction ............................................................6 Packing List ....................................................................6 Hardware Descriptions .....................................................6 Technical Indices.............................................................7 Chapter 3........................................................................10 Installing and Uninstalling Data Card ...........................10 System Requirements .................................................... 11 Hardware Installation..................................................... 11 Software Installation...................................................... 12 Software Un-Installation ................................................. 17 Hardware Un-Installation ................................................ 17 Chapter 4........................................................................18 Data Card Usage ............................................................18 Starting Program........................................................... 19 Connecting with Network ................................................ 20 Interrupting Connection ................................................. 22 Viewing Logs ................................................................ 23 Managing Account and Password...................................... 24 Displaying Help Information ............................................ 25 Exiting......................................................................... 25 Safely Removing DATA CARD .......................................... 26 Chapter 5........................................................................28 Common Faults Analysis................................................28 Common Faults and Solution .......................................... 29 Appendix A .....................................................................30 Abbreviations .................................................................30 Figures............................................................................32 Tables .............................................................................34 Index ..............................................................................36 About this Manual Purpose This manual describes the safety precautions of the ZXMBW TP25I WiMAX wireless data card as well as installation, un-
installation, usage and troubleshooting. To facilitate descriptions, this manual calls the ZXMBW TP25I WiMAX wireless data card as DATA CARD for short. Unless otherwise specified, the DATA CARD mentioned in this manual refers to the ZXMBW TP25I WiMAX wireless data card. Intended Audience As an end user manual, this manual is intended for users of the ZXMBW TP25I WiMAX wireless data card. Prerequisite Skill and Knowledge To use this document effectively, users should have a general understanding of wireless technology. Familiarity with the following is helpful:
WiMax technology telecommunications
ZXMBW system and its various components What is in This Manual This Manual contains the following chapters:
T AB L E 1 C H A P T E R S S U M M A R Y Chapters Summary Chapter 1 Safety Instruction This chapter describes safety instruction while using the Data Card. Chapter 2 Data Card Overview This chapter gives a brief introduction to function, hardware of DATA CARD. Confidential and Proprietary Information of ZTE CORPORATION 7 ZXMBW TP25I WiMAX Wireless Data Card User Manual Chapters Summary Chapter 3 Installing and Uninstalling Data Card This chapter describes the hardware and software installation and un-installation procedures of Data Card. Chapter 4 Data Card Usage chapter describes This principles of Data Card the usage Chapter 5 Common Faults Analysis This chapter describes common faults and Handlings of Data Card. Conventions ZTE documents employ the following typographical conventions. Typographical Conventions T A B L E 2 T Y P O G R A P H I C A L C O N V E N T I O N S Typeface Meaning Italics Quotes Bold CAPS Constant width References to other Manuals and documents. Links on screens. Menus, menu options, function names, input fields, radio button names, check boxes, drop-
down lists, dialog box names, window names. Keys on the keyboard and buttons on screens and company name. Text that you type, program code, files and directory names, and function names.
Optional parameters. Mandatory parameters. Select one of the parameters that are delimited by it. Note: Provides additional information about a certain topic. Checkpoint: Indicates that a particular step needs to be checked before proceeding further. Tip: Indicates a suggestion or hint to make things easier or more productive for the reader. Confidential and Proprietary Information of ZTE CORPORATION iv Mouse Operation Conventions About this Manual T A B L E 3 M O U S E O P E R AT I O N C O N V E N T I O N S Typeface Meaning Click Refers to clicking the primary mouse button (usually the left mouse button) once. Double-click Refers to quickly clicking the primary mouse button
(usually the left mouse button) twice. Right-click Refers to clicking the secondary mouse button
(usually the right mouse button) once. Drag Refers to pressing and holding a mouse button and moving the mouse. Safety Conventions T A B L E 4 S AF E T Y C O N V E N T I O N S Safety Word Meaning Danger Warning Caution Note Tip Indicates an imminently hazardous situation, which if not avoided, will result in death or serious injury. This safety word should be limited to only extreme situations. Indicates a potentially hazardous situation, which if not avoided, could result in death or serious injury. Indicates a potentially hazardous situation, which if not avoided, could result in minor or moderate injury. It may also be used to alert against unsafe practices. Indicates a potentially hazardous situation, which if not avoided, could result in injuries, equipment damage or interruption of services; or provides additional information about a certain topic. Indicates a suggestion or hint to make things easier or more productive for the reader How to Get in Touch The following sections provide information on how to obtain support for the documentation and the software. Confidential and Proprietary Information of ZTE CORPORATION iii ZXMBW TP25I WiMAX Wireless Data Card User Manual Customer Support If you have problems, questions, comments, or suggestions regarding at support@zte.com.cn. You can also call our customer support center at (86) 755 26771900 and (86) 800-9830-9830. product, contact e-mail your by us Documentation Support ZTE welcomes your comments and suggestions on the quality and usefulness of this document. For further questions, comments, or suggestions on the documentation, you can contact us by e-mail at doc@zte.com.cn; or you can fax your comments and suggestions to (86) 755 26772236. You can also browse our website at http://support.zte.com.cn, which contains various interesting subjects like documentation, knowledge base, forum and service request. Caution:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation. Information to User: The user is cautioned that changes and modifications made to the equipment without the approval of manufacturer could void the user's authority to operate this equipment Confidential and Proprietary Information of ZTE CORPORATION iv C h a p t e r 1 Safety Instructions This Chapter covers the following topics:
Personal Safety
Data Card Safety
Precautions Confidential and Proprietary Information of ZTE CORPORATION 1 ZXMBW TP25I WiMAX Wireless Data Card User Manual Personal Safety
The use of RF devices including the DATA CARD may result in interference to some electronic devices (such as some electronic systems in motor vehicles) with poor shielding performance. Therefore, before using the DATA CARD, make sure to consult the manufacturer of such electronic devices.
Pay attention to the use restrictions and regulations in sites with explosive manufacture processes (such as oil warehouse and chemical factory) and those with special requirements
(such as hospital).
During the use of the DATA CARD, do not contact the antenna area unless necessary, to save energy.
Pay attention to traffic safety. During the driving, obey the related local laws or regulations.
Keep the DATA CARD out of reach of children, lest they play
it as a toy, which may result in personal injury. The SAR limit of USA (FCC) is 1.6 W/kg averaged over one gram of tissue. Device types ZXMBW TP25I (FCC ID: Q78-ZXMBW-TP25I) has also been tested against this SAR limit. The highest SAR value reported under this standard during product certification for use when used next to the body in a typical notebook computer with side-mounted PCMCIA port to maintain compliance with FCC RF exposure requirements, use accessories that maintain a 1.5cm separation distance between the user's body and the back of the handset. The use of belt clips, holsters and similar accessories should not contain metallic components in its assembly. The use of accessories that do not satisfy these requirements may not comply with FCC RF exposure requirements, and should be avoided DATA CARD Safety
You can only use the original accessories or the ones approved by the manufacturer. The use of any approved accessory may affect the performance of the DATA CARD, go against the related national regulations on communication terminal products, and even result in personal injury. the warranty terms or
Do not use this product immediately after drastic temperate change. In this case, condensation may appear inside or outside the device. Do not use it until the condensation is dried.
Use slightly damp antistatic cloth for cleaning the DATA CARD. Do not use chemical substances such as detergent for cleaning the surface of the DATA CARD. Confidential and Proprietary Information of ZTE CORPORATION 2 Chapter 1 Safety Instructions
All data cards may be interfered with and hence have their performance affected.
Do not expose your DATA CARD to strong sunshine, to avoid damaging it by excessive heating.
Try to prevent all kinds of liquid from entering the DATA CARD to cause damage.
Do not throw or knock the DATA CARD, because rough handling may damage the circuit bards inside.
Do not connect the DATA CARD with any unmatched device.
Only professionals are allowed to open the DATA CARD;
otherwise, personal injury or device damage may occur.
Do not connect the DATA CARD with any unmatched product.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation. Precautions
Before or during sending/receiving a call, note and obey the local laws or regulations on the use of mobile wireless phones.
The supplement restraint system (SRS), brake, speed control system and fuel injection system are expected to be free from influence of the wireless transmission. For any problem, contact your car dealer.
When you are refueling or in a site prohibiting the use of bidirectional wireless devices, turn off the DATA CARD. Do not place the DATA CARD with explosive or inflammable objects, to ensure safety. Turn off the DATA CARD before takeoff of the airplane. During the flight, do not use the DATA CARD to avoid interference with the communication system of the airplane. When the airplane has not taken off, you can use the DATA CARD if you get the approval of the aircrew. This device should not be co-located or operating in conjunction with any other transmitter or antenna. Confidential and Proprietary Information of ZTE CORPORATION 3 ZXMBW TP25I WiMAX Wireless Data Card User Manual This page is intentionally blank. 4 Confidential and Proprietary Information of ZTE CORPORATION Chapter 1 Data Card Overview C h a p t e r 2 Data Card Overview This chapter describes:
Brief Introduction
Packing List
Hardware Description
Technical Specifications Confidential and Proprietary Information of ZTE CORPORATION 5 ZXMBW TP25I WiMAX Wireless Data Card User Manual Brief Introduction The ZXMBW TP25I WiMAX wireless data card is based on the WiMAX network. In places covered by WiMAX signals, it is capable of accessing the broadband Internet any time and any place, receiving/sending E-mail, and fulfilling such services as IPTV, VoIP and VOD, providing users with extremely free, flexible, fast and convenient Internet access. In this way, it makes your dream of a mobile office come true. With a PCMCIA interface, the DATA CARD can be conveniently inserted into a notebook computer such an interface. The PCMCIA interface is used for the external hardware connection of the notebook computer, with a high transmission speed, easy plugging/unplugging and good compatibility. Based on the IEEE 8.02.16e standard, the DATA CARD is capable of providing high-speed data access under the mobile environment. Adopting the PCMCIA interface, the DATA CARD is compact and light. It has sleek appearance and stable performance. Currently, the DATA CARD can be used in the Windows XP operating system only. Packing List Before unpacking the DATA CARD, you should check whether the package is intact. After opening the package, check the objects inside. The following objects should be contained:
ZXMBW TP25I WiMAX wireless data card
Installation CD (with installer for installation at the computer side and instructions)
User manual
Quality certificate
Warranty card Hardware Descriptions The appearance of a DATA CARD is shown in Figure 1. Confidential and Proprietary Information of ZTE CORPORATION 6 Chapter 1 Data Card Overview F I G U R E 1 AP P E A R AN C E O F A D AT A C AR D There is a PCMCIA interface on the DATA CARD, for connecting with the PCMCIA slot on the computer. Technical Indices The technical indices of the DATA CARD are listed in Table 5. T A B L E 5 T E C H N I C AL I N D I C E S Item Network parameter Index WIMAX 2.5G Hz Dimensions About 118 mm54 mm5 mm Weight Data rate About 54 g Maximum rate: 2 Mbps in downlink, 1 Mbps in uplink Working voltage 3.3V (using the power supply of the notebook computer) Current loss Dormant: 80 mA; Maximum: 800 mA Maximum transmitting power Highest SAR Value ERP Operation Condition:
23.8 dbm 0.268 W/kg (Limit: 1.6W/kg) 23.2dBm Storage conditions : -25 to 75, 10% to 95%
Operation conditions : 0 to 50, 10% to 90%
humidity (non condensing) Altitude: up to and including 5000m above sea level Confidential and Proprietary Information of ZTE CORPORATION 7 ZXMBW TP25I WiMAX Wireless Data Card User Manual Applied Standards ANSI Lawful interception
(CALEA) Title Communications Assistance for Law Enforcement (CALEA) Electrical safety Fire resistance Fire propagation Telcordia Voltage levels for DC Powered Equipment Fire Resistance Criteria Equipment Assemblies Fire Propagation Risk NEBS Level 3 Network Equipment-Building System (NEBS) CLEI codes TL1 commands Common Language Equipment Identification Transaction Language 1 Operations System Modifications for the Integration of Network Elements Radio frequency devices Wireless Communications Service Emergency Services (E-911) Local Number Portability
(LNP) hard-of-hearing/disabled users
(like TDD) Priority Access Channel Assignment (PACA) Government Emergency Telecommunications Service
(GETS) National Electric Code Article 250 National Electric Safety Code Department of Labor-
Occupational Safety and Health Standards OSMINE (OSS) FCC Part 15 Part 27 Others E-911 LNP TDD PACA GETS Electrical safety Electrical safety Occupational Safety Spec Ref
, Ref
, Ref
, and Ref and subsequent versions ANSI T1.315-2001 ANSI T1.307-2003 ANSI T1.319-2002 GR-63-CORE GR-1089-CORE SR-3580 GR-383-CORE GR-485-CORE TR-NWT-000831 GR-199-CORE GR-833-CORE SR-683 FCC Part 15 FCC Part 27 Ref
, Ref
, and subsequent versions Remark RBOC-
specific requireme nts. optional optional 8 Confidential and Proprietary Information of ZTE CORPORATION Chapter 1 Data Card Overview UL certification TIA testing Power &
Grounding Title Underwriters Laboratories 60950 version 3 Technical Criteria for Terminal Equipment to Prevent Harms to the Telephone Network SBC Local Exchange Carriers, Network Equipment Power, Grounding, Environmental, and Physical Design Requirements Spec UL 60950 version 3 Remark TIA-968-Section 6 TP76200MP SBC-
specific requireme nts Confidential and Proprietary Information of ZTE CORPORATION 9 C h a p t e r 3 Installing and Uninstalling Data Card This chapter describes:
System Requirements
Hardware Installation
Hardware Description
Technical Specifications Confidential and Proprietary Information of ZTE CORPORATION 10 Chapter 3 Installing and Uninstalling Data Card System Requirements Before installing the DATA CARD, make sure that the following three conditions are met:
Your computer has an available PCMCIA slot.
The CPU main frequency is at least 1 GHz, the memory is at least 256 MB, and the spare space of the hard disk is at least 100 MB.
The operating system is Windows XP. Hardware Installation Insert the DATA CARD into a vacant PCMCIA slot of your computer. The hardware installation procedure is as follows:
1. Press the locker of the PCMCIA slot of your computer, to make the locker automatically bounce out. Then press it to eject the PCMCIA slot protection panel. 2. Take out this panel, and make the pins of the DATA CARD pointing at the PCMCIA slot of the computer, and then slowly push the DATA CARD with appropriate force, as shown in Figure 2. F I G U R E 2 I N S E R T I N G A D AT A C ARD I N T O A C O M P U T E R 3. After the DATA CARD and the PCMAIC slot normally join together, you can hear a tick, as shown in Figure 3. Confidential and Proprietary Information of ZTE CORPORATION 11 ZXMBW TP25I WiMAX Wireless Data Card User Manual F I G U R E 3 I N S T A L L I N G T H E D AT A C ARD C O R R E C T L Y Note: If the DATA CARD program has never been installed in the operating system, after the DATA CARD is inserted, the operating system prompts that new hardware is detected and the corresponding applications need to be installed. For the installation of the DATA CARD program, refer to Section Software Installation. Software Installation If the DATA CARD is used for the first time, install the DATA CARD program for the purpose of normal use. Attention: To avoid failed DATA CARD program installation or hardware damage, do not unplug/plug the DATA CARD during the installation of the DATA CARD program The installation procedure of the DATA CARD program is as follows:
1. Place the CD delivered with the DATA CARD into the CD-ROM of the computer. If the computer supports the automatic start of the CD, the Welcome to the TP25I Setup Wizard window is displayed, as shown in Figure 4. If the computer does not support the automatic start of the CD, you need to run the installation program setup.exe in the CD directory, to display the Welcome to the TP25I Setup Wizard window shown in Figure 4. Confidential and Proprietary Information of ZTE CORPORATION 12 Chapter 3 Installing and Uninstalling Data Card F I G U R E 4 W E L C O M E T O T H E TP25I S E T U P W I Z AR D 2. Click Next to access the User Information window, as shown in Figure 5. F I G U R E 5 U S E R I N F O R M AT I O N 3. Enter the user information, and click Next to enter the License Agreement window, as shown in Figure 6. Confidential and Proprietary Information of ZTE CORPORATION 13 ZXMBW TP25I WiMAX Wireless Data Card User Manual F I G U R E 6 L I C E N S E AG R E E M E N T 4. Carefully read the agreement contents, and click I accept the agreement and then Next, to enter the Select Destination Location window, as shown in Figure 7. F I G U R E 7 S E L E C T D E S T I N A T I O N L O C AT I O N Confidential and Proprietary Information of ZTE CORPORATION 14 Chapter 3 Installing and Uninstalling Data Card 5. Enter or select the installation destination directory, and click Next to enter the Select Start Menu Folder window, as shown in Figure 8. F I G U R E 8 S E L E C T S T AR T M E N U F O L D E R 6. Click Next to enter the Select Addition Task window, as shown in Figure 9. F I G U R E 9 S E L E C T AD D I T I O N T A S K Confidential and Proprietary Information of ZTE CORPORATION 15 ZXMBW TP25I WiMAX Wireless Data Card User Manual 7. Check Create a desktop icon and click Next, to enter the Ready to Install window, as shown in Figure 10. F I G U R E 10 R E A D Y T O I N S T A L L 8. Click Install to start installing the DATA CARD program. At the end of the successful installation, the Completing the TP25I Setup Wizard window appears, as shown in Figure 11. F I G U R E 11 C O M P L E T I N G T H E TP25I S E T U P W I Z AR D 9. Click Finish to finish the installation of the DATA CARD program. Confidential and Proprietary Information of ZTE CORPORATION 16 Chapter 3 Installing and Uninstalling Data Card Software Un-Installation When DATA CARD is not required the any more or need to re-
install the DATA CARD program, un-install the DATA CARD program. The un-installation procedure of the DATA CARD program is as follows:
1. If the DATA CARD program is running, you should shut it down. When the DATA CARD program is running, the tray icon is displayed at the lower right corner of the Windows interface. Right-click and select Exit in the shortcut menu, to shut down the DATA CARD program. 2. In the Windows interface, select Start > Program Files >
ZTE WiMAX > Uninstall TP25I, to enter the un-installation confirmation window, as shown in Figure 12. F I G U R E 12 U N-I N S T AL L A T I O N C O N F I G U R A T I O N 3. Click Yes to un-install the DATA CARD program. 4. At the end of the un-installation, click Finish. Hardware Un-Installation For the descriptions of the hardware un-installation, refer to the Section: Safely Removing DATA CARD. Confidential and Proprietary Information of ZTE CORPORATION 17 C h a p t e r 4 Data Card Usage This chapter describes:
Starting Program
Connecting with Network
Interrupting Connection
Viewing Logs
Managing Account and Password
Displaying Help Information
Exiting
Safely Removing Data Card Confidential and Proprietary Information of ZTE CORPORATION 18 Chapter 4 Data Card Usage Starting Program After the DATA CARD program is successfully installed, the Start
> Program Files > ZTE WiMAX program group is added in the start menu of the Window system, and the shortcut icon is also added on the Windows desktop. Select Start > Program Files > ZTE WiMAX > TP25I, or on the Windows desktop, to start the DATA double-click CARD program. After the DATA CARD program is started, the window shown in Figure 13 appears. F I G U R E 13 M A I N W I N D O W O F DAT A C ARD P R O G R AM After the DATA CARD program is started, the corresponding tray icon is displayed at the lower right corner of the Windows interface. The buttons in the main window and their functions are described in Table 6. The tray icons in different status and their meaning are described in Table 7. T A B L E 6 B U T T O N S AN D F U N C T I O N S Button Icon Meaning Entering the login window Entering the status window Entering the log window Confidential and Proprietary Information of ZTE CORPORATION 19 ZXMBW TP25I WiMAX Wireless Data Card User Manual Entering the about window Showing the help document Exiting the application Indicating the signal when the network is not connected Indicating the signal when the network is connected. There are 7 signal levels, and more bars indicate stronger signal. T A B L E 7 T R A Y I C O N S AN D M E AN I N G S Icon Meaning The DATA CARD is not inserted or is unavailable. The network is not accessed or the connection is interrupted. The network is connected successfully. The functions of the tray icons of the DATA CARD program are described in Table 8. T A B L E 8 F U N C T I O N S O F T R A Y I C O N S Operation Function Double-click the tray icon Activating the application software and displaying the main window of the DATA CARD program Displaying the shortcut menu. The shortcut menu items and their meanings are as follows:
Open: Activating the application software and displaying the main window of the DATA CARD program Connect: Entering the login window Disconnect: Canceling this login Exit:
closing the application interface the connection and Interrupting Right-click the tray icon Connecting with Network After the DATA CARD program is started, you need to log in to the network and pass the authentication before normally accessing the Internet. Confidential and Proprietary Information of ZTE CORPORATION 20 Chapter 4 Data Card Usage The network login procedure is as follows:
1. Click Start > Program Files > ZTE WiMAX > TP25I to start the DATA CARD program. 2. In the main window of the DATA CARD program, click or right-click in the lower right corner of the Window interface, and then select Connect to enter the network login window, as shown in Figure 14. If the main window is hidden, you can double-click show it. to F I G U R E 14 N E T W O R K L O G I N 3. Enter the login account or select an account used in the Account pull-down list box, enter the corresponding password, and click Login. The program starts connecting with the network. After the connection succeeds, the main window of the DATA CARD program displays Status: Connected as well as the data volume and connection duration, as shown in Figure 15. At the same time, the tray icon turns into
. Confidential and Proprietary Information of ZTE CORPORATION 21 ZXMBW TP25I WiMAX Wireless Data Card User Manual F I G U R E 15 S T A T U S O F I N T E R N E T AC C E S S Now you can enjoy the WiMAX broadband wireless Internet access. Note: To save the account and the password, you need to check Save Password before clicking Login. After this operation, you do not need to enter the password again in the next network login. Interrupting Connection After the successful login, exit the network connection to end this Internet access. The network logout procedure is as follows:
1. In the login status window shown in Figure 15, click
, and then select Disconnect, Disconnect or right-click to enter the logout confirmation dialog box. 2. Click Yes to cancel the network login. After the above operations, the tray icon of the DATA CARD
, and the main window displays applications turns into Status: Disconnected. Confidential and Proprietary Information of ZTE CORPORATION 22 Chapter 4 Data Card Usage Viewing Logs After logging in to the network successfully, you can view the Internet access information records of the current account, such as login time, logout time and connection duration. The detailed operations are as follows:
1. In the login status window shown in Figure 15 click to enter the Internet access log window as shown in Figure 16. F I G U R E 16 I N T E R N E T AC C E S S L O G 2. Right-click on the recording area to display the operation menu for this log as shown in Figure 17. F I G U R E 17 O P E R AT I O N M E N U F O R I N T E R N E T AC C E S S L O G The functions of this menu are described in Table 9. Confidential and Proprietary Information of ZTE CORPORATION 23 ZXMBW TP25I WiMAX Wireless Data Card User Manual T A B L E 9 M E N U AN D M E A N I N G S Icon Delete Selected Empty Copy Selected Meaning Deleting the selected record Clearing the recorded table items Copying the selected record Select All Selecting all records Refresh Refreshing the recording table Managing Account and Password In the login window, you can perform simple operations to the login accounts and the passwords, such as saving an account and a password or deleting the selected account and password. After saving the account and password, you do not need to enter such information again in the next login operation. Instead, you only need to select the account from the pull-down list box. Deleting an account and a password means to delete the saved account and password. The procedure of saving an account and a password is as follows:
1. Select Start > Program Files > ZTE WiMAX > TP25I to start the wireless network card program and enter the main window. 2. Enter the account and the password, and then check Save Password. 3. Click Login. The procedure of deleting an account and a password is as follows:
1. Select Start > Program Files > ZTE WiMAX > TP25I to start the wireless network card program and enter the main window. 2. In the Account pull-down list box, select the account to be deleted, and right-click it to select Delete Account. The deletion confirmation dialog box pops up, as shown in Figure 18. Confidential and Proprietary Information of ZTE CORPORATION 24 F I G U R E 18 A C C O U N T D E L E T I O N C O N F I R M A T I O N Chapter 4 Data Card Usage 3. Click OK to delete the selected account. Displaying Help Information Displaying the help information means to view the on-line help information of the DATA CARD program. The detailed operations are as follows:
Click on the main window of the DATA CARD program. Exiting Exiting means exiting the DATA CARD program. The detailed operations are as follows:
on the main window of the DATA CARD program, or Click right-click to select Exit. After you exiting the program, the tray icon of the DATA CARD program disappears from the lower right corner of the Windows interface. Confidential and Proprietary Information of ZTE CORPORATION 25 ZXMBW TP25I WiMAX Wireless Data Card User Manual Safely Removing DATA CARD Usually, the DATA CARD is inserted into the PCMCIA slot of the computer when necessary. At the end of the use, you need to remove it from the PCMCIA slot of the computer and save it properly. The procedure of safely removing the DATA CARD from the notebook computer is as follows:
1. If the DATA CARD program is running, you should shut it down first. For the detailed operations, refer to Section Exiting. 2. Click to select Beceem_Communications_Inc. Tarang in the shortcut menu. 3. Click OK in the pop-up dialog box for confirming the hardware removing. 4. Press the PCMCIA locker, and remove the DATA CARD from the PCMCIA slot. 5. Install the protection panel of the PCMCIA slot. Confidential and Proprietary Information of ZTE CORPORATION 26 ZXMBW TP25I WiMAX Wireless Data Card User Manual This page is intentionally blank. 27 Confidential and Proprietary Information of ZTE CORPORATION C h a p t e r 5 Common Faults Analysis This chapter describes:
Common Faults and solutions Confidential and Proprietary Information of ZTE CORPORATION 28 Chapter 4 Common Faults Analysis Common Faults and Solution If DATA CARD gets defective, refer to Table 10 for handling and troubleshooting. If the information in Table 10 cannot help, you can contact the local technical support staff of ZTE. T A B L E 10 C O M M O N F AU L T S O F DAT A C ARD AN D H A N D L I N G S Symptom Possible Cause Solution The DATA CARD receives no signal after the computer is restarted. You are out of the coverage of the WiMAX network, for example, in an underground parking lot or tunnel. The DATA CARD is not inserted properly. The notebook computer cannot detect the DATA CARD, in the installation of the DATA CARD. The installer of the DATA CARD is not correctly installed. The DATA CARD is not inserted properly. The data connection fails. You are out of the coverage of the WiMAX network, for example, in an underground parking lot or tunnel. The network in this area at this time is busy. You entered the login user name or password incorrectly. Move to the site with sound network signal. Unplug and then plug the DATA CARD again in a right way. Run the installer at first, and then insert the DATA CARD. If you are using the Windows XP operating system, operate following the Windows wizard, to install the installer. Restart the computer and then insert the DATA CARD again. Move to the site with sound network signal. Try again after a while. Perform login again with the correct user name and password. Unable to open any website after accessing the Internet. Unable to access the Internet when roaming The IE browser gets faulty. The system is infected with virus (for example, Worm Blaster occupies huge uplink traffic so that you cannot receive the downlink traffic and cannot open any website). If the IE browser is faulty, update it to a higher version or reinstall it. Apply professional anti-virus software to the whole operating system. The roaming function of your DATA CARD has not been enabled. Contact the operator of the area where your DATA CARD was purchased. Confidential and Proprietary Information of ZTE CORPORATION 29 A p p e n d i x A Abbreviations Abbreviation Full name AMC ARQ BBUA BSS BSC CN CPU MIMO MES IEEE IPTV OFDMA PC PCMCIA WiMAX RA25 SS VOD VoIP Adaptive Modulate Code Automatic Repeat reQuest Agile Base Station Baseband Unit Base Station System Base Station controller Core Network Center Processing Unit Multi Input Multi Output Multi Extension Subsystem Institute of Electrical and Electronics Engineers Internet Protocol Television orthogonal frequency division multiplexing access Personal Computer Personal Computer Memory Card International Association Worldwide Interoperability for Microwave Access Agile 2.5G Remote Radio Frequency Unit Subscriber Station Video-On-Demand Voice over Internet Protocol Confidential and Proprietary Information of ZTE CORPORATION 30 Chapter 4 Abbreviations This page is intentionally blank. Confidential and Proprietary Information of ZTE CORPORATION 31 Figures Figure 1 Appearance of a DATA CARD...................................7 Figure 2 Inserting a DATA CARD into a Computer................. 11 Figure 3 Installing the DATA CARD Correctly ....................... 12 Figure 4 Welcome to the TP25I Setup Wizard ...................... 13 Figure 5 User Information................................................. 13 Figure 6 License Agreement .............................................. 14 Figure 7 Select Destination Location................................... 14 Figure 8 Select Start Menu Folder ...................................... 15 Figure 9 Select Addition Task ............................................ 15 Figure 10 Ready to Install................................................. 16 Figure 11 Completing the TP25I Setup Wizard ..................... 16 Figure 12 Un-Installation Configuration............................... 17 Figure 13 Main Window of DATA CARD Program................... 19 Figure 14 Network Login................................................... 21 Figure 15 Status of Internet Access.................................... 22 Figure 16 Internet Access Log ........................................... 23 Figure 17 Operation Menu for Internet Access Log................ 23 Figure 18 Account Deletion Confirmation............................. 25 Confidential and Proprietary Information of ZTE CORPORATION 32 ZXMBW TP25I WiMAX Wireless Data Card User Manual This page is intentionally blank. 33 Confidential and Proprietary Information of ZTE CORPORATION Tables Table 1 Chapters Summary..................................................i Table 2 Typographical Conventions ...................................... ii Table 3 Mouse Operation Conventions ................................. iii Table 4 Safety Conventions................................................ iii Table 5 Technical Indices....................................................7 Table 6 Buttons and Functions........................................... 19 Table 7 Tray Icons and Meanings ....................................... 20 Table 8 Functions of Tray Icons ......................................... 20 Table 9 Menu and Meanings .............................................. 24 Table 10 Common Faults of DATA CARD and Handlings......... 29 Confidential and Proprietary Information of ZTE CORPORATION 34 ZXMBW TP25I WiMAX Wireless Data Card User Manual This page is intentionally blank. 35 Confidential and Proprietary Information of ZTE CORPORATION Index CDMA, i CDMA2000, i E, 1, 3 INFORMATION, 2 LEGAL, 2 N/A, 3 P, 1, 3 R&D, 3 R1, 2, 3 URL, 1 ZXC10, i Confidential and Proprietary Information of ZTE CORPORATION 36
| frequency | equipment class | purpose | ||
|---|---|---|---|---|
| 1 | 2007-02-13 | 2530 ~ 2620 | TNB - Licensed Non-Broadcast Station Transmitter | Original Equipment |
| app s | Applicant Information | |||||
|---|---|---|---|---|---|---|
| 1 | Effective |
2007-02-13
|
||||
| 1 | Applicant's complete, legal business name |
ZTE Corporation
|
||||
| 1 | FCC Registration Number (FRN) |
0009043175
|
||||
| 1 | Physical Address |
ZTE Plaza, Hi-tech Park, Nanshan District
|
||||
| 1 |
Shenzhen, Guangdong, N/A 518057
|
|||||
| 1 |
China
|
|||||
| app s | TCB Information | |||||
| 1 | TCB Application Email Address |
h******@atcb.com
|
||||
| 1 | TCB Scope |
B1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 (below 3 GHz) & 27
|
||||
| app s | FCC ID | |||||
| 1 | Grantee Code |
Q78
|
||||
| 1 | Equipment Product Code |
ZXMBW-TP25I
|
||||
| app s | Person at the applicant's address to receive grant or for contact | |||||
| 1 | Name |
Y**** X****
|
||||
| 1 | Title |
Product Certification Manager
|
||||
| 1 | Telephone Number |
0086-********
|
||||
| 1 | Fax Number |
0086-********
|
||||
| 1 |
x******@zte.com.cn
|
|||||
| app s | Technical Contact | |||||
| 1 | Firm Name |
ZTE Corporation
|
||||
| 1 | Name |
L**** R******
|
||||
| 1 | Physical Address |
ZTE Plaza, Hi-Tech Park
|
||||
| 1 |
Shenzhen, Guangdong, 518057
|
|||||
| 1 |
China
|
|||||
| 1 | Telephone Number |
+86 7********
|
||||
| 1 | Fax Number |
+86 7********
|
||||
| 1 |
h******@zte.com.cn
|
|||||
| app s | Non Technical Contact | |||||
| n/a | ||||||
| app s | Confidentiality (long or short term) | |||||
| 1 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
| 1 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
| if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
| app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
| 1 | Is this application for software defined/cognitive radio authorization? | No | ||||
| 1 | Equipment Class | TNB - Licensed Non-Broadcast Station Transmitter | ||||
| 1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | WiMax Wireless Data Card | ||||
| 1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
| 1 | Modular Equipment Type | Does not apply | ||||
| 1 | Purpose / Application is for | Original Equipment | ||||
| 1 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
| 1 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
| 1 | Grant Comments | Power Output is Conducted. SAR compliance is limited to notebook computers with side mounted PCMCIA ports and configurations similar to that tested for this filing. Compliance of this device in all final host configurations is the responsibility of the Grantee. End-users must be provided with specific information required to satisfy RF exposure compliance for all final host devices. This transmitter must not be co-located with any other transmitters or antennas. The highest reported SAR value is: Body 0.27W/kg | ||||
| 1 | Is there an equipment authorization waiver associated with this application? | No | ||||
| 1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
| app s | Test Firm Name and Contact Information | |||||
| 1 | Firm Name |
ZRT EMC Shenzhen Laboratory
|
||||
| 1 | Name |
B******** X****
|
||||
| 1 | Telephone Number |
86-75********
|
||||
| 1 | Fax Number |
86-75********
|
||||
| 1 |
x******@zte.com.cn
|
|||||
| Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
| 1 | 1 | 27 | BC | 2530.00000000 | 2620.00000000 | 0.2400000 | 0.0200000000 ppm | 10M0G9W | |||||||||||||||||||||||||||||||||
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC