FCC ID: SRQ-ZTEL210 WCDMA/GSM(GPRS) Multi-Mode Digital Mobile Phone

ZTE Blade L210 Quick Start Guide 1 LEGAL INFORMATION Copyright 2020 ZTE CORPORATION. All rights reserved. No part of this publication may be quoted, reproduced, translated or used in any form or by any means, electronic or mechanical, including photocopying and microfilm, without the prior written permission of ZTE Corporation. Notice ZTE Corporation reserves the right to make modifications on print errors or update specifications in this guide without prior notice. We offer self-service for our smart terminal device users. Please visit the ZTE official website (at www.ztedevices.mx) for more information on self-service and supported product models. Information on the website takes precedence. Visit https://ztedevices.mx/soporte/ to download the user manual. Just click Support from the home page and then select the location, product type, and name to search for related support information. Disclaimer ZTE Corporation expressly disclaims any liability for faults and damages caused by unauthorized modifications of the software. Images and screenshots used in this guide may differ from the actual product. Content in this guide may differ from the actual product or software. Trademarks ZTE and the ZTE logos are trademarks of ZTE Corporation. Android is a trademark of Google LLC. The Bluetooth word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by ZTE Corporation is under license. microSDXC Logo is a trademark of SD-3C, LLC. Other trademarks and trade names are those of their respective owners. Version No.: R1.0 Edition Time : May 6, 2020 Manual No.: 079584xxxxxx 2 Earpiece Front camera Getting to Know Your Phone Touch screen Indicator light Volume key Power key Headset jack Back camera Flash 3 Charging/micro

-USB jack Fingerprint sensor Setting Up Your Phone The nano-SIM card can be installed or removed while the phone is turned on. Power off your phone before removing or replacing the battery. WARNING!

To avoid damage to the phone, do not use any other kind of SIM cards, or any non-standard nano-SIM card cut from a SIM card. You can get a standard nano-SIM card from your service provider. 1. Place your finger into the slot at the bottom of the back cover, and gently lift and remove the cover. 2. Install the nano-SIM card and the microSDXC card

(optional) as shown. 3. Insert the battery,making sure the connectors align.Gently push down on the battery until it clicks into place. 4 4. Replace the back cover. Charging the Phone Your phones battery should have enough power for the phone to turn on, find a signal, and make a few calls. You should fully charge the battery as soon as possible. WARNING!

Use only ZTE-approved chargers and USB cables. The use of unapproved accessories could damage your phone or cause the battery to explode. 1. Connect the adapter to the charging jack. Ensure that the adapter is inserted in the correct direction. 2. Connect the charger to a standard AC power outlet. 3. Disconnect the charger when the battery is fully charged. NOTE:

If the battery is extremely low, you may be unable to power on the phone even when it is being charged. In this case, try again after charging the phone for at least 20 5 minutes. Contact the customer service if you still cannot power on the phone after prolonged charging. Powering On/Off Your Phone Make sure the battery is charged before powering on. Press and hold the Power key to turn on your phone. To power off, press and hold the Power key to open the options menu, and touch

. NOTE:

If the screen freezes or takes too long to respond, reinstall the battery and power on again. FM Radio Scanning for Channels 1. Plug in a wired headset, open the app list and touch FM Radio. NOTE:

2. Touch

> Scan > OK to scan for all available channels and save them to the All channels list. When you open the FM Radio app for the first time, it will automatically scan for channels and show the All channels list. You can also touch view the list.

> All channels to Listening to FM Radio 1. Open FM Radio while the headset is connected. 2. Touch

> All channels and select a channel. You can also drag the red line along the frequency panel or touch or to switch to other channels, or touch or to adjust the current channel frequency. NOTES:

speaker. connection. Touch to add the channel to favourites. Touch to listen to the radio through the phone The FM radio feature does not require an Internet 6 Product Safety Information Dont make or receive phone calls while driving. Never text while driving. Keep your phone at least 10 mm away from your body while making calls. Small parts may cause choking. Your phone can produce a loud sound. To prevent possible hearing damage, do not listen at high volume levels for long periods. Exercise caution when holding your phone near your ear while the loudspeaker is in use. Avoid contact with anything magnetic. Keep away from pacemakers and other electronic medical devices. Turn off when asked to in hospitals and medical facilities. Turn off when told to on aircraft and at airports. Turn off when near explosive materials or liquids. Dont use at gas stations. Your phone may produce a bright or flashing light. Dont dispose of your phone in fire. Avoid extreme temperatures. Avoid contact with liquids. Keep your phone dry. Do not attempt to disassemble your phone. 7 Only use approved accessories. Dont rely on your phone as a primary device for emergency communications. FCC RF Exposure Information (SAR) This phone is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the United States. During SAR testing, this device was set to transmit at its highest certified power level in all tested frequency bands, and placed in positions that simulate RF exposure in usage against the head with no separation, and near the body with the separation of 10 mm. Although the SAR is determined at the highest certified power level, the actual SAR level of the device while operating can be well below the maximum value. This is because the phone is designed to operate at multiple power levels so as to use only the power required to reach the network. In general, the closer you are to a wireless base station antenna, the lower the power output. The exposure standard for wireless devices employing a unit of measurement is known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6 W/kg. This device is complied with SAR for general population/uncontrolled exposure limits in ANSI/IEEE C95.1-1992 and had been tested in accordance with the measurement methods and procedures specified in IEEE1528. The FCC has granted an Equipment Authorization for this model phone with all reported SAR levels evaluated as in compliance with the FCC RF exposure guidelines. SAR information on this model phone is on file with the FCC and can be found under the Display Grant section of www.fcc.gov/oet/ea/fccid after searching on FCC ID:

8 SRQ-ZTEL210. The FCC ID also can be found on the device when you open the app list and touch Settings >

About phone > FCC ID. For this device, the highest reported SAR value for usage against the head is 1.109 W/kg, and for usage near the body is 0.992 W/kg. While there may be differences between the SAR levels of various phones and at various positions, they all meet the government requirements. SAR compliance for body-worn operation is based on a separation distance of 10 mm between the unit and the human body. Carry this device at least 10 mm away from your body to ensure RF exposure level compliant or lower to the reported level. To support body-worn operation, choose the belt clips or holsters, which do not contain metallic components, to maintain a separation of 10 mm between this device and your body. RF exposure compliance with any body-worn accessory, which contains metal, was not tested and certified, and using such body-worn accessory should be avoided. 15.19 Labeling requirements. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. 15.21 Information to user. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. 9 15.105 Information to the user. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

-Reorient or relocate the receiving antenna.

-Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-Consult the dealer or an experienced radio/TV technician for help. DATOS ELECTRICOS DE OPERACIN:

Adaptador de Corriente ca/cc:

Telfono: 3.8V Salida: 5.0V 1000mA Entrada: 100 - 240V ~ 50/60Hz 250mA 10

ZTE Blade L210 GSM: 850/900/1800/1900MHz UMTS: 850/1700/1900MHz FCC ID:SRQ-ZTEL210 WIFI MAC: XXXXXXXXXXXXXXX BT MAC: XXXXXXXXXXXXXXX_ IMEI: XXXXXXXXXXXXXXX Cen ee lg) Se

FCC Class II Permissive Change Request Letter To FCC:

RE: FCC Permissive II Change Request for Company: ZTE Corporation FCC ID: SRQ-ZTEL210 We are submitting an application for a class II permissive change to the FCC approval of the Company name: ZTE Corporation, product description: WCDMA/GSM(GPRS) Multi-Mode Digital Mobile Phone

(FCC ID: SRQ-ZTEL210, Original Grant Date: 06/11/2020). The transmitter module itself has not changed. Here are the changes:

1. New EUT support dual SIM Card slots, No other Bands and RF Paramater change. So we re-

assessment 15B Part Original New Sincerely, Signature:

Name/title: Yu Gong/Certification Manager Company: ZTE Corporation Address: ZTE Plaza, Keji Road South, Shenzhen, China E-mail: gongyu@zte.com.cn Tele: +86-21-68895397 Date: 2020/08/13

ZTE Corporation. Letter of Authorization Company:

ZTE Corporation SRQ-ZTEL210 ZTE Plaza, Keji Road South, Shenzhen, China WCDMA/GSMGPRSMulti-Mode Digital Mobile Phone Address:

Product Name:

Model Number: ZTE Blade L210 FCC Identifier:

We authorize MiCOM Labs Inc, 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the above named equipment. Any individual within MiCOM Labs is authorized to act on our behalf and take action on the application. We declare that MiCOM Labs Inc, 575 Boulder Court, Pleasanton, California 94566, USA, is allowed to forward all information related to the approval project to the Federal Communication Commission and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Name:

Title:

Signature of applicant:

Certification Manager Date: 2020/8/13 Yu Gong

ZTE Corporation Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Date: 2020/6/9 Subject; Request for Confidentiality FCC ID: SRQ-ZTEL210 To Whom It May Concern, Pursuant to the provisions of the Commissions rules Title 47 Sections 0.457 and 0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Operational Description Bom List Tune up procedure In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR 2.803 and the importation rules in Title 47 CFR 2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s);

External Photos Test Setup Photos Internal Photos User Manual OR For 45 days, pursuant to Public Notice DA 04-1705. For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature:

Name: Yu Gong Title: Certification Manager