FCC ID: I88P660HNUT1V2 802.11n 2x2 Wireless ADSL2+ 4 Port Gateway

P-660HN(U)-Tx v2 802.11n2x2 WirelessADSL2+4-portGateway QuickStartGuide Version3.10 7/2012 Edition2 1 P-660HN(U)-Tx v2QuickStartGuide Overview TheP-660HN(U)-Tx v2isawirelessADSLrouterwithafour-portbuilt-inswitch. ThisQuickStartGuideshowsyouhowtousetheP-660HN(U)-Tx v2to connecttotheInternetandhowto configurethedevice settingstoconnectwirelesslyy. SeeyourUsersGuideforbackgroundinformationonallfeatures. Quick Login Information LANIPaddress http://192.168.1.254 defaultadministratorpassword Check back label for the info 2 P-660HN(U)-Tx v2QuickStartGuide If you want to mount this product onto the wall, please follow below step. Step 1: use screws (Dimension:4.0mm) fix bracket into the wall Step 2: put equipment mount on bracket 3 P-660HN(U)-Tx v2QuickStartGuide Note: The device is designed to allow both vertical and wall mounted usage. HardwareConnections 1DSL:UsethegraytelephonewiretoconnectyourP-660HN(U)-Tx v2DSLporttoatelephonejack(or to themodemportonasplitterifyouareusingone). 2ETHERNET:UsetheyellowEthernetcabletoconnectacomputertoanETHERN ETportfor initialconfigurationand/orInternetaccess. 3POWER:Usetheincludedpoweradaptortoconnectanappropriatepowersourc etothePOWERsocket. Makesurethepowersourceison. 4Pushin thePOWERbutton. 5Look atthe lightsonthe frontpanel. ThePOWERlightblinkswhileyourP-660HN(U)-Tx v2startsupandstays ononceitisready. EachETHERNETlightstaysonifthe correspondingETHERNETportisproperlyconnectedandblinks whenthereistraffic. TheDSLlightisonwhenthe P-660HN(U)-Tx v2hasaDSLconnection. TheINTERNETlightisonwhenyouareabletoaccesstheInternetandblinkswhe ntheP-660HN(U)-Tx v2 Issendingorreceivingdata.Waita couple 4 ofminuteswhileyourdevicecheckstheconnection. P-660HN(U)-Tx v2QuickStartGuide Ifanyoftheselightsarenoton,checkyourconnectionsandinspectyourcablesfo rdamage.Ifthe lights are stilloff,contactyourlocalvendor. 2InternetConnectionSetup:Automatic Usethissectionto haveyourP-660HN(U)-Tx v2automaticallydetectandsetupyourInternetconnection. 1Openyourwebbrowserto awebsite.WaitwhileyourP-660HN(U)-Tx v2triestodetectyourDSLconnectiontoyourISP.Thismaytakea fewminutes. 2Afteritdetectstheconnection,theDSLlightshowsgreenonyourdeviceandthe Internetlightcomeson when theInternetisreadyforyouto use.If youhaveaPPPoEconnection,youwillhavetoenteryourusernameandpasswo rd. 3Gotosection3ifyouwishtoconfigureyourwirelesssettings. 4 If you do not see the connection test screen, or the connection test is not successful, follow the instructionsinthescreenbelow,orcheckyourconnectionsandrestarttheP-

660HN(U)-Tx v2.Ifyoustillcannot accessthe Internet,followthestepsinsection3. 3ConfiguringyourWirelessSettings 5 P-660HN(U)-Tx v2QuickStartGuide Tocreateawirelessnetwork,theP-660HN(U)-Tx v2andyourwirelesscomputermustalluse thesameSSID

(networkname),channelandsecuritysettings. IfyoudonotsetwirelesssecuritythenanyonewithinrangecoulduseyourP-

660HN(U)-Tx v2to accessyour networkandtheInternet. ChooseWPA-PSKwirelesssecurity ifyourwirelessdevicesupportsitasitis strongerthanWEP.Otherwise chooseWEP. 1SelectActiveandclickNexttocontinue.It is stronglyrecommendedthatEnableOTISTisNOTselected. Seesection7formoreinformation. 2 C o n f i g u r e yourwirelesssettingsinthescreen.ClickNext. 3Ifyou selecteitherWEPorWPA-PSKsecurity(recommended),thenfollowthe directionstoenter theappropriatekey.ClickNexttocontinueandApplyto saveyourwirelessLANsettings. 4CheckyourconfigurationandwritedownyourwirelessLANsettingsforlateruse. ClickFinishtocompleteand savethe wizardsetup. 5YourInternetisreadyforyouto use.Openyourbrowserandnavigatetoyourfavoritewebsite. 6 4InternetConnectionSetupUsingAdvancedSettings P-660HN(U)-Tx v2QuickStartGuide UsethissectiontosetupyourInternetconnectionmanuallyif youdonotseethe ISPParametersforInternet Accessscreenwhenyourun thewizard(see section4,step4). 1Loginagain.(Followsteps1to5in section3.) 2SelectGotoAdvancedsetup.Then,clickApply. 3TheStatusscreenappears.ClickNetwork>WANinthenavigationpanelonth eleftofthescreen. 4 E n t e r the informationexactlyasprovidedbyyourISP.ClickApply. 5IfyoustillcannotaccesstheInternet,seeTroubleshootingand/orcontactyour InternetServiceProvider

(ISP)forassistance. Troubleshooting 1Ifyoucannotaccessthewebconfigurator, YourcomputermaybesettouseastaticIPaddressinadifferentsubnetfromthe ZyXELdevice.See the appendixinthe UsersGuideforinformationonsettingupyourIP address. IfyouareusingInternetExplorerinWindowsXPorWindowsServer2003,makes ureyouallowpop-up 7 P-660HN(U)-Tx v2QuickStartGuide windows,JavaScriptsandJavapermissionsorsettheInternetsecuritylevellow erthanHighinInternet Explorer(in InternetExplorer,clickTools>InternetOptions>Security >CustomLevel...)

.Seethe appendixin theUsersGuideformoreinformation. 2IfyoucannotaccesstheInternetwhenyourcomputerisconnectedtotheETHER NETport,followthese steps. A)Checkthe lightsonthefrontpanel.If theyaredifferentfromwhatisdescribedin section1,makesure theP-660HN(U)-Tx v2iscorrectlyconnected.(Seesection1.)Ifthelightsarestilldifferent,turnoffthe device, waitafewseconds,andturniton again. B) Checkyouhavecorrectlyenteredtheinformationyour ISPgaveyou.Forexample,if youraccounthas ausernameandpassword,makesureyoutype itcorrectly.Inaddition,ifyouarenotsurewhich encapsulationyour ISP uses,contactyourISP.IfyourISPdidnotgiveyou Internetconnection information,followthestepsinsection2. C)IfyouareusinganewInternetaccount,contactyourISPtomakesureitisactive. D)Ifyoustillhaveproblems,seeTroubleshootingintheUsersGuide. IfyoucannotaccesstheInternetafteryoutake the stepsabove,eithertrythe followingorcontactyourISP:

E)TurnyourP-660HN(U)-Tx v2offandon. OpenyourInternetbrowserif itisnotalreadyopen. Letthe P-660HN(U)-Tx v2completetheDSLconnectiontest(this maytake 8 severalminutes).See section2for details. P-660HN(U)-Tx v2QuickStartGuide Ifthetestissuccessful,checkwhetheryoucanaccessthe Internet. IfyoustillcannotaccesstheInternet,contactyourInternetServiceProvider. 3Ifyoucannotaccessthe Internetusingthe wirelessnetwork,followthesesteps. A)Onacomputerinthewirelessnetwork,openyourbrowser,andgoto http://192.168.1.254.Ifyouseethe loginscreenin section3,followsuggestionsA-Fabove.Ifyou do not,gotothenextstep. B)OnacomputerconnectedtotheP-660HN(U)-Tx v2,make sureyourP-

660HN(U)-Tx v2and thecomputersonyour wirelessnetworkareusingthesamewirelessandwirelesssecuritysettings.Se ethe chapteron WirelessLANinthe UsersGuideformoreinformaction. ViewingYourProductsCertifications 1Goto www.zyxel.com. 2Selectyourproductfromthedrop-downlistboxonthe ZyXELhomepagetogoto thatproduct'spage. 3Selectthecertificationyouwish toviewfromthispage. CustomerInformationStatement 9 P-660HN(U)-Tx v2QuickStartGuide Theinformationinformingtheuserofhis/herandthetelephonecompany'sright sandobligationsisoutlined onthe followingpages.Thisinformationwillbeincludedinthe finalversionofthe manual. CustomerInformation 1ThisequipmentcomplieswithPart68oftheFCCrulesandthe requirementsadoptedbythe ACTA.On bottomofthisequipmentisalabelthatcontains,amongotherinformation,aprod uctidentifierofQWEST P-660HN(U)-Tx v2.Ifrequested,thisnumbermustbeprovidedto the telephonecompany. 2 IfthisequipmentDLcausesharmto thetelephonenetwork,the telephonecompanywillnotifyyouin advancethattemporarydiscontinuanceofservicemayberequired.Butifadvan cenoticeiisntpractical, the telephonecompanywillnotify the customerassoonaspossible. Alsoyouwillbeadvisedof yourright tofilea complaintwiththeFCCifyoubelieveitisnecessary. 3The telephonecompanymaymakechangesinits facilities,equipment,operationsorproceduresthatcouldaffecttheoperationoft heequipment.Ifthishappens,thetelephonecompanywillprovideadvance noticeinorderforyouto make necessarymodificationtomaintainuninterruptedservice. 10 P-660HN(U)-Tx v2QuickStartGuide 4Ifyouexperiencetroublewiththisequipment,youdisconnectitfromthenetworku ntiltheproblemhas beencorrectedoruntilyouaresurethattheequipmentisnotmalfunctioning. 5Pleasefollowinstructionsfor repairing if any(e.g.batteryreplacementsection);otherwisedonotalternate orrepairanypartsofdeviceexceptspecified. 6Connectionto partylineserviceissubjectto statetariffs.Contactthestate publicutilitycommission,public servicecommissionorcorporationcommissionforinformation. 7If the telephonecompanyrequestsinformationonwhatequipmentisconnectedtoth eirlines,informthem of:

aTheringerequivalencenumberis02 b)TheUSOCjackrequiredRJ14,and c)TheFCCRegistrationNumberUS:1RODL02BP-660HN(U)-Tx v2 Item(a)and(c) areindicatedon thelabel.The ringerequivalencenumber(REN)isusedto determinehow manydevicescanbeconnectedto yourtelephoneline.Inmostareas,the sumofthe RENsofalldeviceson Anyonelineshouldnotexceedfive(5.0).Iftoomanydevicesareattached,they maynotringproperly. 11 P-660HN(U)-Tx v2QuickStartGuide 8Ifyourhomehasspeciallywiredalarmequipmentconnectedtothetelephonelin e,ensurethe installation ofthisequipmentdoesnotdisablealarmequipment;consultyourtelephonecom panyora qualifiedinstaller. Certifications Federal Communications Commission (FCC) Interference Statement The device complies with Part 15 of FCC rules. Operation is subject to the following two conditions:

. This device may not cause harmful interference. This device must accept any interference received, including interference that may cause undesired operations. This device has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This device generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this device does cause harmful interference to radio/television reception, which can be determined by turning the device off and on, the user is 12 P-660HN(U)-Tx v2QuickStartGuide encouraged to try to correct the interference by one or more of the following measures:

1 Reorient or relocate the receiving antenna. 2 Increase the separation between the equipment and the receiver. 3 Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. 4 Consult the dealer or an experienced radio/TV technician for help. FCC Radiation Exposure Statement

. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. IEEE 802.11b or 802.11g or 802.11n (20MHz) operation of this product in the U.S.A. is firmware-limited to channels 1 through 11. IEEE 802.11n

(40MHz) operation of this product in the U.S.A. is firmware-limited to channels 3 through 9. To comply with FCC RF exposure compliance requirements, a separation distance of at least 20 cm must be maintained between the 13 P-660HN(U)-Tx v2QuickStartGuide antenna of this device and all persons. Safety Warnings

. Do NOT use this product near water, for example, in a wet basement or near a swimming pool. Do NOT expose your device to dampness, dust or corrosive liquids. Do NOT store things on the device. Do NOT install, use, or service this device during a thunderstorm. There is a remote risk of electric shock from lightning. Connect ONLY suitable accessories to the device. Do NOT open the device or unit. Opening or removing covers can expose you to dangerous high voltage points or other risks. ONLY qualified service personnel should service or disassemble this device. Please contact your vendor for further information. Make sure to connect the cables to the correct ports. Place connecting cables carefully so that no one will step on them or stumble over them. Always disconnect all cables from this device before servicing or disassembling. Use ONLY an appropriate power adaptor or cord for your device. Connect the power adaptor or cord to the right supply voltage (for 14 example, 110V AC in North America or 230V AC in Europe). P-660HN(U)-Tx v2QuickStartGuide

. Do NOT allow anything to rest on the power adaptor or cord and do NOT place the product where anyone can walk on the power adaptor or cord. Do NOT use the device if the power adaptor or cord is damaged as it might cause electrocution. If the power adaptor or cord is damaged, remove it from the device and the power source. Do NOT attempt to repair the power adaptor or cord. Contact your local vendor to Order a new one. Do not use the device outside, and make sure all the connections are indoors. There is a remote risk of electric shock from lightning. Do NOT obstruct the device ventilation slots, as insufficient airflow may harm your device. Use only No. 26 AWG (American Wire Gauge) or larger telecommunication line cord. Antenna Warning! This device meets ETSI and FCC certification requirements when using the included antenna(s). Only use the included antenna(s). If you wall mount your device, make sure that no electrical lines, gas or water pipes will be damaged. 15 P-660HN(U)-Tx v2QuickStartGuide Your product is marked with this symbol, which is known as the WEEE mark. WEEE stands for Waste Electronics and Electrical Equipment. It means that used electrical and electronic products should not be mixed with general waste. Used electrical and electronic equipment should be treated separately Information to user CAUTION: changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. ServiceRequirements Intheeventofequipmentmalfunction,allrepairsshouldbeperformedbyourCo mpanyoran authorized agent.It isthe responsibilityof usersrequiringservicetoreportthe needfor service toourCompanyor to one ofourauthorizedagents. 16 P-660HN(U)-Tx v2QuickStartGuide Servicecanbefacilitatedthroughourofficeat:

ZyXELCommunicationsCorporation 6,InnovationRdII,Science-BasedIndustrialPark,Shin-Chu,Taiwan,R.O.C.

+886-3-578-3942 17

802.11n 2x2 Wireless ADSL2+ 4port Gateway

(Model name: P-660HNU-T1 v2,DSL-100HNU-T1 v2) FCC ID Position:

FCC ID

ZyXEL Communications Corporation 2012/08/01 To: Teleconformity Rietven 31, 7534NH Enschede, the Netherlands Dear Sir/Madam, Re: Project and Product Certification Representative Authorization Letter We, ZyXEL Communications Corporation hereby authorize Teleconformity. to act as a Certification Body for certifying for the following project(s):

Equipment: 802.11n 2x2 Wireless ADSL2+ 4port Gateway Model No.: P-660HNU-T1 v2,DSL-100HNU-T1 v2; P-660HNU-T3 v2, DSL-100HNU-

T3 v2; P-660HN-T1 v2, DSL-100HN-T1 v2,P-660HN-T3 v2, DSL-100HN-T3 v2 FCC ID: I88P660HNUT1V2 We affirm that between Teleconformity and ZyXEL Communications Corporation, any difference in understanding, including test plan, measurement methods, applicable standards and relevant procedures and processes have been resolved prior to commencement of testing activities. Sincerely, Thomas Wei/ Senior Manager ZyXEL Communications Corporation/

NO.6,Innovation Rd. Science Based Industrial Park Hsin-Chu,Taiwan

ZyXEL Communications Corporation 2012/08/01 To:

Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD Confidentiality Request regarding application for certification of FCC ID: I88P660HNUT1V2 We hereby request confidential treatment of information accompanying this application as outlined below:

- Schematics

- Operational Description

- Block Diagram The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 & 0.459 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, Thomas Wei/ Senior Manager ZyXEL Communications Corporation/

NO.6,Innovation Rd. Science Based Industrial Park Hsin-Chu,Taiwan

ZyXEL Communications Corporation FCC Declaration of Conformity Number: CF302 Version: V05 Date: 21-05-2012 A declaration of conformity can only be issued by a U.S. entity based on a test report from an accredited laboratory. Accredited laboratories are located in the US, or in a country where the FCC has signed an MRA with. For a full list of accredited laboratories recognized by the FCC, please go to the FCC website https://fjallfoss.fcc.gov/oetcf/eas/reports/TestFirmSearch.cfm and for Test Firm Type, select Accredited. Additional information on administrative requirements for Declaration of Conformity can be found in KDB Publication Number 349827. We,

(responsible party must be a legal entity registered within the U.S., see FCC rule part 2.909 (2), must a U.S. address, such as importer or local manufacturer) Company Name: ZyXEL Communications Corporation Address:

No. 6, Innovation Rd. II, Science Based Industrial Park Postal/Zip:

231 City: Hsin-Chu State/Province:

Country: Taiwan Contact Person:

Mr. Ms. Name: Thomas Wei Function: Seniour Manager Email:

sales@zyxel.com Web:

Phone: +886-3-578-3942 Fax: +886-3-578-2439 DoC declare for the equipment identified by:

Product Description 802.11n 2x2 Wireless ADSL2+ 4port Gateway Type or Model(s) P-660HNU-T1 v2,DSL-100HNU-T1 v2; P-660HNU-T3 v2, DSL-100HNU-T3 v2;

P-660HN-T1 v2, DSL-100HN-T1 v2,P-660HN-T3 v2, DSL-100HN-T3 v2 Tradename or Brand(s) ZyXEL that:

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired operation.

(if the DoC test reports are available at this moment, please cross item a below) a). The following test reports, issued by an FCC accredited Laboratory, are subject to this declaration:

Testing Laboratory name:

City and Country:

Lab accreditation Number:

Test Report Number:

Date of issue:

(if no DoC test report is available at this moment, then if you agree with the statement made in item b below, please cross item b below) b). DoC testing is pending at this moment, but will execute and finish the required DoC testing in an FCC accredited Laboratory before marketing the device in the U.S. The following Accredited Test Firm will complete DoC testing:

Accredited Test Firm or Laboratory name, City and Country:

Cerpass Technology Corporation, No.3, 2F-11, YuanQu St., Taipei City, 115 Taiwan Attestation:

In addition to our declaration above, we also will ensure to label the equipment with the FCC logo, the name of the manufacturer and model number, as required by the FCC rule part 15.19. City and Country:

Date:

Name:

(this must be a person) Function:

Signature:

(or official company stamp) Taipei City, Taiwan 2012/08/01 Thomas Wei Senior Manager