| all | frequencies |
|
exhibits | applications |
|---|---|---|---|---|
| manual |
| app s | submitted / available | |||||||
|---|---|---|---|---|---|---|---|---|
| 1 2 |
|
User Manual rev | Users Manual | 5.85 MiB | ||||
| 1 2 | Attestation Statements | |||||||
| 1 2 | Cover Letter(s) | |||||||
| 1 2 | Cover Letter(s) | |||||||
| 1 2 | External Photos | |||||||
| 1 2 | Internal Photos | |||||||
| 1 2 | ID Label/Location Info | |||||||
| 1 2 | ID Label/Location Info | |||||||
| 1 2 | RF Exposure Info | |||||||
| 1 2 | Test Report | |||||||
| 1 2 | Test Report | |||||||
| 1 2 | Test Setup Photos |
| 1 2 | User Manual rev | Users Manual | 5.85 MiB |
WRE6606 Dual-Band Wireless AC1300 Access Point Version 1.00 (ABDU.0) Edition 1, 10/2016 Quick Start Guide Users Guide Default Login Details http://zyxelsetup Web Address http://DHCP-assigned IP www.zyxel.com http://192.168.1.2 Password 1234 Copyright 2016 ZyXEL Communications Corporation IMPORTANT!
READ CAREFULLY BEFORE USE. KEEP THIS GUIDE FOR FUTURE REFERENCE. Related Documentation Quick Start Guide The Quick Start Guide shows how to connect the WRE6606 and access the Web Configurator wizards. More Information Go to support.zyxel.com to find other information on the WRE6606. WRE6606 Users Guide 2 Contents Overview Contents Overview Users Guide .........................................................................................................................................8 Introduction ...............................................................................................................................................9 The Web Configurator .............................................................................................................................13 WRE6606 Modes ....................................................................................................................................19 Access Point Mode .................................................................................................................................21 Client Mode .............................................................................................................................................27 Repeater Mode .......................................................................................................................................31 eaZy123 Wizard Setup ............................................................................................................................37 Tutorials ..................................................................................................................................................45 Technical Reference ..........................................................................................................................53 Monitor ....................................................................................................................................................54 Wireless LAN ..........................................................................................................................................56 LAN .........................................................................................................................................................78 One Connect ...........................................................................................................................................80 Maintenance ............................................................................................................................................82 Troubleshooting ......................................................................................................................................95 WRE6606 Users Guide 3 Table of Contents Table of Contents Contents Overview ..............................................................................................................................3 Table of Contents .................................................................................................................................4 Part I: Users Guide ........................................................................................... 8 Chapter 1 Introduction...........................................................................................................................................9 1.1 Overview .............................................................................................................................................9 1.2 Securing the WRE6606 .....................................................................................................................10 1.3 Front Panel ........................................................................................................................................10 1.4 WPS Button .......................................................................................................................................12 1.4.1 Wi-Fi Protected Setup .............................................................................................................12 Chapter 2 The Web Configurator ........................................................................................................................13 2.1 Overview ...........................................................................................................................................13 2.2 Accessing the Web Configurator .......................................................................................................13 2.2.1 Login Screen ...........................................................................................................................13 2.2.2 Password Screen ....................................................................................................................14 2.2.3 Home Screen ...........................................................................................................................15 2.3 Navigating the Web Configurator ......................................................................................................16 2.3.1 Title Bar ...................................................................................................................................17 2.3.2 Navigation Panel .....................................................................................................................18 2.4 Resetting the WRE6606 ....................................................................................................................18 Chapter 3 WRE6606 Modes .................................................................................................................................19 3.1 Overview ...........................................................................................................................................19 3.1.1 Device Modes ..........................................................................................................................19 Chapter 4 Access Point Mode.............................................................................................................................21 4.1 Overview ...........................................................................................................................................21 4.2 What You Can Do .............................................................................................................................21 4.3 What You Need to Know ...................................................................................................................22 4.3.1 Setting your WRE6606 to AP Mode ........................................................................................22 4.3.2 Configuring your WLAN, LAN and Maintenance Settings .......................................................22 WRE6606 Users Guide 4 Table of Contents 4.4 AP Mode Status Screen ....................................................................................................................22 4.4.1 Navigation Panel .....................................................................................................................24 Chapter 5 Client Mode .........................................................................................................................................27 5.1 Overview ...........................................................................................................................................27 5.2 What You Can Do .............................................................................................................................27 5.3 What You Need to Know ...................................................................................................................27 5.3.1 Setting your WRE6606 to Client Mode ....................................................................................28 5.4 Client Mode Status Screen ................................................................................................................28 5.4.1 Navigation Panel .....................................................................................................................30 Chapter 6 Repeater Mode ....................................................................................................................................31 6.1 Overview ...........................................................................................................................................31 6.2 What You Can Do .............................................................................................................................31 6.3 What You Need to Know ...................................................................................................................32 6.3.1 Setting your WRE6606 to Repeater Mode ..............................................................................32 6.3.2 Configuring your WLAN, LAN and Maintenance Settings .......................................................32 6.4 Repeater Mode Status Screen ..........................................................................................................33 6.4.1 Navigation Menus ....................................................................................................................35 Chapter 7 eaZy123 Wizard Setup........................................................................................................................37 7.1 Overview ...........................................................................................................................................37 7.2 Accessing the Wizard ........................................................................................................................37 7.3 Using the Wizard ...............................................................................................................................37 7.3.1 AP Mode ..................................................................................................................................37 7.3.2 Client Mode .............................................................................................................................39 7.3.3 Repeater Mode ........................................................................................................................41 Chapter 8 Tutorials...............................................................................................................................................45 8.1 Overview ...........................................................................................................................................45 8.2 Connecting to the Internet from an Access Point ..............................................................................45 8.3 Connecting to a Wireless Network Using WPS .................................................................................45 8.3.1 Push Button Configuration (PBC) ............................................................................................46 8.3.2 PIN Configuration ....................................................................................................................47 8.4 Connecting the WRE6606 to an AP ..................................................................................................48 8.4.1 Selecting an AP from an Automatically Detected List .............................................................49 8.4.2 Selecting an AP by Manually Entering Security Information ...................................................50 8.5 Connecting the WRE6606 (in Client Mode) to an AP or Wireless Router .........................................52 WRE6606 Users Guide 5 Table of Contents Part II: Technical Reference............................................................................ 53 Chapter 9 Monitor.................................................................................................................................................54 9.1 Overview ...........................................................................................................................................54 9.2 What You Can Do .............................................................................................................................54 9.3 Packet Statistics Screen .................................................................................................................54 Chapter 10 Wireless LAN.......................................................................................................................................56 10.1 Overview .........................................................................................................................................56 10.2 What You Can Do ...........................................................................................................................56 10.3 What You Should Know ..................................................................................................................56 10.3.1 Wireless Security Overview ...................................................................................................57 10.3.2 Guest WLAN ..........................................................................................................................58 10.4 General Wireless LAN Screen .......................................................................................................59 10.5 Wireless Security ............................................................................................................................62 10.5.1 No Security ............................................................................................................................62 10.5.2 WEP Encryption ....................................................................................................................63 10.5.3 WPA-PSK/WPA2-PSK ...........................................................................................................64 10.6 AP Select Screen ............................................................................................................................65 10.7 MAC Filter .......................................................................................................................................69 10.8 Wireless LAN Advanced Screen .....................................................................................................70 10.9 Quality of Service (QoS) Screen .....................................................................................................71 10.10 WPS Screen ..................................................................................................................................72 10.11 WPS Device Screen ......................................................................................................................73 10.12 Scheduling Screen ........................................................................................................................74 10.13 Guest WLAN Screen .....................................................................................................................75 Chapter 11 LAN ......................................................................................................................................................78 11.1 Overview .........................................................................................................................................78 11.2 LAN IP Screen .................................................................................................................................78 Chapter 12 One Connect .......................................................................................................................................80 12.1 Overview .........................................................................................................................................80 12.1.1 What You Can Do ..................................................................................................................80 12.2 One Connect Screen .......................................................................................................................80 Chapter 13 Maintenance ........................................................................................................................................82 13.1 Overview .........................................................................................................................................82 WRE6606 Users Guide 6 Table of Contents 13.2 What You Can Do ...........................................................................................................................82 13.3 General ...........................................................................................................................................82 13.4 System Password Screen ..............................................................................................................83 13.5 Time Screen ....................................................................................................................................83 13.6 Firmware Upgrade Screen ..............................................................................................................85 13.7 Backup / Restore Screen ................................................................................................................87 13.7.1 Backup Configuration ............................................................................................................88 13.7.2 Restore Configuration ............................................................................................................88 13.7.3 Back to Factory Defaults .......................................................................................................89 13.8 Restart Screen ................................................................................................................................89 13.9 System Mode ..................................................................................................................................90 13.9.1 System WPS Behavior ..........................................................................................................91 Chapter 14 Troubleshooting..................................................................................................................................95 14.1 Power, Hardware Connections, and LEDs ......................................................................................95 14.2 WRE6606 Access and Login ..........................................................................................................96 14.3 Internet Access ...............................................................................................................................97 14.4 Resetting the WRE6606 to Its Factory Defaults ..............................................................................98 14.5 Wireless Problems ..........................................................................................................................98 Appendix A Customer Support ........................................................................................................100 Appendix B Setting Up Your Computers IP Address ......................................................................106 Appendix C Legal Information .........................................................................................................134 Index ..................................................................................................................................................142 WRE6606 Users Guide 7 PART I Users Guide 8 CHAPTER 1 Introduction 1.1 Overview The WRE6606 allows you to easily extend existing IEEE 802.11 a/b/g/n/ac wireless networks fast and easy. Simply plug the WRE6606 directly into a power outlet and the LED signal strength indicator allows you to determine the ideal installation location. The one-click Wi-Fi Protected Setup
(WPS Button on page 12) provides frustration-free wireless client setup and completes the instant network access setup. Also, the WRE6606 can elevate your network experiences with dual band and Wi-Fi Multimedia (WMM). You could use the 2.4GHz band for regular Internet surfing and downloading while using the 5GHz band for time sensitive traffic, such as high-definition video streaming, and big size file transfers. With WMM, it can automatically prioritize different types of network traffics to reach optimal performance. Figure 1 Universal Repeater WLAN AP N LEW Your can create the following connections using the WRE6606:
LAN. You can connect network devices via the Ethernet port of the WRE6606 so that they can communicate with each other and access the Internet. WLAN. Wireless clients can connect to the WRE6606 to access network resources. Use a (supported) web browser to manage the WRE6606. WRE6606 Users Guide 9 Chapter 1 Introduction 1.2 Securing the WRE6606 Do the following things regularly to make the WRE6606 more secure and to manage the WRE6606 more effectively. Change the password. Use a password thats not easy to guess and that consists of different types of characters, such as numbers and letters. Write down the password and put it in a safe place. Back up the configuration (and make sure you know how to restore it). Restoring an earlier working configuration may be useful if the device becomes unstable or even crashes. If you forget your password, you will have to reset the WRE6606 to its factory default settings. If you backed up an earlier configuration file, you would not have to totally re-configure the WRE6606. You could simply restore your last configuration. 1.3 Front Panel Figure 2 Front Panel WPS Button WRE6606 Users Guide 10 Chapter 1 Introduction The following table describes the LEDs. Table 1 Front Panel LEDs COLOR LED Power/WPS Green STATUS On DESCRIPTION The WRE6606 is receiving power and functioning properly. 2.4G Green 5G Green LAN Green/
Orange Blinking Off On Blinking Off On Blinking Off On Blinking Off This remains on for 5 minutes after a successful WPS connection has been established. The WRE6606 is booting, resetting to factory defaults, the WRE6606 is waiting for another WPS device to connect, or firmware upgrade is in progress. The WRE6606 is not receiving power, or there is no WPS connection established. In AP mode, it means WLAN signal is detected. In AP mode, Client mode, and Repeater mode, it signifies data is transmitting. Different LED colors indicate the Wi-Fi signal strength. Green: signifies a signal strength of 50% ~ 100%
Orange: signifies a signal strength of 21% ~ 49%
Red: signifies a signal strength under 20%
In AP mode, Client mode, and Repeater mode, the 2.4 GHz wireless LAN is not enabled. There is no signal detected or the WRE6606 is not connected to a wireless router/AP, or the LEDs are turned off using the WPS button. In AP mode, it means WLAN signal is detected. In AP mode, Client mode, and Repeater mode, it signifies data is transmitting. Different LED colors indicate the Wi-Fi signal strength. Green: signifies a signal strength of 50% ~ 100%
Orange: signifies a signal strength of 21% ~ 49%
Red: signifies a signal strength under 20%
In AP mode, Client mode, and Repeater mode, the 5 GHz wireless LAN is not enabled. There is no signal detected or the WRE6606 is not connected to a wireless router/AP, or the LEDs are turned off using the WPS button. LAN connection is successful. Data is transmitting. LAN connection is off. Different LED colors indicate the Ethernet transfer speed. Green: signifies the Ethernet speed has reached 1000 Mbps. Orange: signifies the Ethernet speed has reached 10/100 Mpbs. WPS Green On Blinking Off WPS connection has accomplished. WPS connection is in process. WPS connection is disabled or failed. WRE6606 Users Guide 11 Chapter 1 Introduction 1.4 WPS Button The WPS button can be used to begin Wi-Fi Protected Setup (WPS), reboot the WRE6606 while keeping its configuration or reboot the WRE6606 to factory default configuration. The WRE6606 begins connecting to a wireless client via WPS. See Section 1.4 on page 12. The WRE6606 resets its configuration to factory defaults and reboots. Also, power LED will be blinking. See Section 2.4 on page 18. RESULT Turn off or turn on all LEDs. Table 2 WPS Button Functions ACTION Press three times within 5 seconds AP Mode Push the WPS button once Hold for 5 to 10 seconds The WRE6606 keeps its configuration and reboots. Hold for more than 10 seconds Repeater Mode Push the WPS button once Push twice within 5 seconds Hold for 5 to 10 seconds The WRE6606 keeps its configuration and reboots. Hold for more than 10 seconds Client Mode Push the WPS button once Hold for 5 to 10 seconds The WRE6606 keeps its configuration and reboots. Hold for more than 10 seconds The WRE6606 begins connecting to access point via WPS. The WRE6606 begins connecting to upper router via WPS. The WRE6606 begins connecting to a wireless client via WPS. See Section 1.4 on page 12. The WRE6606 resets its configuration to factory defaults and reboots. Also, power LED will be blinking. See Section 2.4 on page 18. The WRE6606 resets its configuration to factory defaults and reboots. Also, power LED will be blinking. Also, power LED will be blinking. See Section 2.4 on page 18. 1.4.1 Wi-Fi Protected Setup Your WRE6606 supports Wi-Fi Protected Setup (WPS), which is an easy way to set up a secure wireless network. WPS is an industry standard specification, defined by the Wi-Fi Alliance. WPS allows you to quickly set up a wireless network with strong security, without having to configure security settings manually. Each WPS connection works between two devices. Both devices must support WPS (check each devices documentation to make sure). Depending on the devices you have, you can either press a button (recommended) on the device itself, or in its configuration utility or enter a PIN (a unique Personal Identification Number that allows one device to authenticate the other) in each of the two devices. When WPS is activated on a device, it has two minutes to find another device that also has WPS activated. Then, the two devices connect and set up a secure network by themselves. For more information on using WPS, see Section 10.10 on page 72. WRE6606 Users Guide 12 CHAPTER 2 The Web Configurator 2.1 Overview This chapter describes how to access the WRE6606 Web Configurator and provides an overview of its screens. The Web Configurator is an HTML-based management interface that allows easy setup and management of the WRE6606 via Internet browser. Use Internet Explorer 6.0 and later versions, Mozilla Firefox 3 and later versions, or Safari 2.0 and later versions. The recommended screen resolution is 1024 by 768 pixels. In order to use the Web Configurator you need to allow:
Web browser pop-up windows from your device. JavaScript (enabled by default). Java permissions (enabled by default). Refer to Chapter 14 Troubleshooting to see how to make sure these functions are allowed in Internet Explorer. 2.2 Accessing the Web Configurator 1 Make sure your WRE6606 hardware is properly connected and prepare your computer or computer network to connect to the WRE6606 (refer to the Quick Start Guide). 2 Launch your web browser. 3 Open a web browser such as Internet Explorer and type http://zyxelsetup or http://192.168.1.2 as the web address in your web browser. 2.2.1 Login Screen The Web Configurator initially displays the following login screen. WRE6606 Users Guide 13 Chapter 2 The Web Configurator Figure 3 Login Screen The following table describes the labels in this screen. Table 3 Login screen LABEL Password Language DESCRIPTION Type "1234" (default) as the password. Select the language you want to use to configure the Web Configurator. Click Login. This shows the time (hh:mm) and date (yyyy:mm:dd) of the time zone you select in the Maintenance > Time screen (see Section 13.5 on page 83). The time is in 24-hour format, for example 15:00 is 3:00 PM. 2.2.2 Password Screen You should see a screen asking you to change your password (highly recommended) as shown next. Figure 4 Change Password Screen WRE6606 Users Guide 14 Chapter 2 The Web Configurator The following table describes the labels in this screen. Table 4 Change Password Screen DESCRIPTION LABEL New Password Type a new password. Retype to Confirm Retype the password for confirmation. Apply Ignore Click Apply to save your changes back to the WRE6606. Click Ignore if you do not want to change the password this time. 2.2.3 Home Screen If you have previously logged into the Web Configurator but did not click Logout, you may be redirected to the Home screen. You can also open this screen by clicking Home (
) in the Web Configurator screens. The Home screen displays as follows. Figure 5 Home Screen The following table describes the labels in this screen. Table 5 Home Screen LABEL GO Language DESCRIPTION Click this to return to the previous screen. Select a language to go to the Web Configurator in that language and click GO.
(This is just an example). This shows the time (hh:mm:ss) and date (yyyy:mm:dd) of the time zone you select in Section 2.2.3.1 on page 16 or Section 13.5 on page 83. WRE6606 Users Guide 15 Chapter 2 The Web Configurator 2.2.3.1 Time/Date Edit One time zone can cover more than one country. You can choose a particular country in which the WRE6606 is located and have the WRE6606 display and use the current time and date for its logs. Click the icon to change the time and date display. Figure 6 Change Time Zone The following table describes the labels in this screen. Table 6 Change Time Zone LABEL Change time zone Finish DESCRIPTION Select the specific country whose current time and date you want the WRE6606 to display. Click this to apply the settings and refresh the weather display. 2.3 Navigating the Web Configurator The following summarizes how to navigate the web configurator from the Status screen. WRE6606 Users Guide 16 Chapter 2 The Web Configurator Figure 7 The Web Configurators Main Screen A C B The Web Configurators main screen is divided into these parts:
A - Title Bar B - Navigation Panel C - Main Window 2.3.1 Title Bar The title bar provides some useful links that always appear over the screens below, regardless of how deep into the Web Configurator you navigate. Figure 8 Title Bar The icons provide the following functions. Table 7 Title Bar: Web Configurator Icons LABEL Logout Home About eaZy123 DESCRIPTION Click this at any time to exit the Web Configurator. Click this to open the home screen. See Section 2.2.3 on page 15. Click this icon to view copyright and a link for related product information. Click this icon to open the wizard. See Chapter 7 on page 37. WRE6606 Users Guide 17 Chapter 2 The Web Configurator 2.3.2 Navigation Panel Use the menu items on the navigation panel to open screens to configure WRE6606 features. The following table describes the icons shown in the navigation panel. Table 8 Navigation Panel Menu Icons ICON DESCRIPTION Click this icon to see the Status page. The information in this screen depends on the device mode you select. Click this icon to see the Monitor navigation menu. Click this icon to see the Configuration navigation menu. Click this icon to see the Maintenance navigation menu. 2.4 Resetting the WRE6606 If you forget your password or IP address, or you cannot access the Web Configurator, press the WPS button for more than 10 seconds to reload the factory-default configuration file. This means that you will lose all configurations that you had previously saved, the password will be reset to 1234. 1 Make sure the power LED is on. 2 3 Press and hold the WPS button. After 10 seconds, the power LED begins flashing. Release the WPS button. The WRE6606 reloads factory defaults and begins to reboot. WRE6606 Users Guide 18 CHAPTER 3 WRE6606 Modes 3.1 Overview This chapter introduces the different modes available on your WRE6606. Sys OP mode. This is the operating mode of your WRE6606, or simply how the WRE6606 is being used in the network. 3.1.1 Device Modes This refers to the operating mode of the WRE6606, which can act as a:
Access Point: Use this mode if you want to extend your network by allowing network devices to connect to the WRE6606 wirelessly. Go to Section 4.4 on page 22 to view the Status screen in this mode. In this mode, you can also set the WRE6606 to work as an AP only, a wireless bridge to establish wireless links with other APs (WDS bridge), or an AP and bridge simultaneously (WDS repeater). See Section 4.2 on page 21 for more information. Client: Use this mode if there is an existing wireless router or access point in the network to which you want to connect your local network. Go to Section 5.4 on page 28 to view the Status screen in this mode. In Client mode, you should know the SSID and wireless security details of the access point to which you want to connect. Repeater: In this mode, the WRE6606 can be an access point and a wireless client at the same time. Go to Section 6.4 on page 33 to view the Status screen in this mode. Use this mode if there is an existing wireless router or access point in your network and you also want to allow clients to connect to the WRE6606 wirelessly. The following figure is an illustration of the device configuration modes of the WRE6606. WRE6606 Users Guide 19 Chapter 3 WRE6606 Modes Figure 9 Device Mode Example Note: Choose your device mode carefully to avoid having to change it later. Under Repeater mode, the WRE6606 supports three WPS behaviors: Normal mode, Range boost mode, and Speed boost mode. These behaviors are only available in Repeater mode through the Maintenance screen. 3.1.1.1 Changing Operating Mode Push the AP (A)/Client (C)/Repeater (R) mode switch on the WRE6606s side panel to the AP position to have the WRE6606 act as an access point. Push the switch to the Client position to have the WRE6606 work as a wireless client. Push the switch to the Repeater position to have the WRE6606 work as a universal repeater. The WRE6606 restarts automatically after you change operating modes. WRE6606 Users Guide 20 CHAPTER 4 Access Point Mode 4.1 Overview In Access Point (AP) mode your WRE6606 bridges a wired network (LAN) and wireless LAN (WLAN) in the same subnet. See the figure below for an example. Figure 10 Wireless Internet Access in Access Point Mode Note: See Chapter 8 on page 45 for an example of setting up a wireless network in Access Point mode. 4.2 What You Can Do Use the Status screen (Section 4.4 on page 22) to view read-only information about your WRE6606. Use the LAN screen (Chapter 11 on page 78) to set the IP address for your WRE6606 acting as an access point. Use the Wireless LAN screens (Chapter 10 on page 56) to configure the wireless settings and wireless security between the wireless clients and the WRE6606. WRE6606 Users Guide 21 Chapter 4 Access Point Mode 4.3 What You Need to Know With the exception of the Scheduling and Guest WLAN screens, other configuration screens in Access Point mode are similar to the ones in repeater mode. See Chapter 3 on page 19 of this Users Guide. 4.3.1 Setting your WRE6606 to AP Mode By default, AP mode in the WRE6606 is not configured with a static IP address. To setup your WRE6606 in AP mode for the first time, the directly-connected router must have the DHCP server function enabled. 1 2 3 To use your WRE6606 as an access point, See Section 3.1.1.1 on page 20. Connect one end of an Ethernet cable to the Ethernet port on the WRE6606 and the other end to your router. Connect your computer to your network, make sure both the WRE6606 and computer are under the same subnet. 4 Open a web browser window and type http://zyxelsetup in the web address. The login screen displays. 5 6 Enter 1234 (default) as the password and click Login. Type a new password and retype it to confirm, then click Apply. Otherwise, click Ignore. The WRE6606 Web Configurator displays, which allows you to configure the AP mode. 4.3.2 Configuring your WLAN, LAN and Maintenance Settings See Chapter 10 on page 56 and Chapter 11 on page 78 for information on configuring your wireless network and LAN settings. See Chapter 13 on page 82 for information on configuring your Maintenance settings. 4.4 AP Mode Status Screen Click to open the Status screen. WRE6606 Users Guide 22 Chapter 4 Access Point Mode Figure 11 Status Screen: Access Point Mode The following table describes the labels shown in the Status screen. Table 9 Status Screen: Access Point Mode LABEL DESCRIPTION Select a number of seconds or None from the drop-down list box to refresh all screen statistics automatically at the end of every time interval or to not refresh the screen statistics. Click this button to refresh the status screen statistics. Device Information Host Name Firmware Version Sys OP Mode LAN Information MAC Address IP Address IP Subnet Mask Default Gateway DHCP WLAN 2.4G Information MAC Address SSID Channel Security WLAN 5G Information This is the WRE6606s system name you configure in the Maintenance > General screen. This is the firmware version and the date created. This is the device mode (Section 3.1.1 on page 19) to which the WRE6606 is set -
AP Mode. This shows the LAN Ethernet adapter MAC Address of your device. This shows the LAN ports IP address. This shows the LAN ports subnet mask. This shows the LAN ports gateway IP address. This shows the LAN ports DHCP role - Client or None. This shows the wireless adapter MAC Address of your device. This shows a descriptive name used to identify the WRE6606 in the wireless LAN. This shows the channel number which you select manually or the WRE6606 automatically scans and selects. This shows the level of wireless security the WRE6606 is using. WRE6606 Users Guide 23 Chapter 4 Access Point Mode Table 9 Status Screen: Access Point Mode (continued) LABEL MAC Address SSID Channel Security System Status Item Data System Up Time Current Date/Time System Resource CPU Usage Memory Usage Interface Status Interface Status Rate Association List 2.4G
#
MAC Address Association Time Association List 5G
#
MAC Address Association Time DESCRIPTION This shows the wireless adapter MAC Address of your device. This shows a descriptive name used to identify the WRE6606 in the wireless LAN. This shows the channel number which you select manually or the WRE6606 automatically scans and selects. This shows the level of wireless security the WRE6606 is using. This column shows the type of data the WRE6606 is recording. This column shows the actual data recorded by the WRE6606. This is the total time the WRE6606 has been on. This field displays your WRE6606s present date and time. This displays what percentage of the WRE6606s processing ability is currently used. When this percentage is close to 100%, the WRE6606 is running at full load, and the throughput is not going to improve anymore. If you want some applications to have more throughput, you should turn off other applications (for example, using bandwidth management. This shows what percentage of the heap memory the WRE6606 is using. This displays the WRE6606 port types. The port types are: LAN and WLAN. For the LAN port, this field displays Down (line is down) or Up (line is up or connected). For the WLAN, it displays Up when the WLAN is enabled or Down when the WLAN is disabled. For the LAN ports, this displays the port speed and duplex setting or is left blank when the line is disconnected. For the WLAN, it displays the maximum transmission rate when the WLAN is enabled and is left blank when the WLAN is disabled. This is the index number of an associated wireless client. This field displays the MAC address of an associated wireless client. This field displays the time a wireless station first associated with the WRE6606s WLAN network. This is the index number of an associated wireless client. This field displays the MAC address of an associated wireless client. This field displays the time a wireless station first associated with the WRE6606s WLAN network. 4.4.1 Navigation Panel Use the menu in the navigation panel to configure WRE6606 features in Access Point mode. The following screen and table show the features you can configure in Access Point mode. WRE6606 Users Guide 24 Chapter 4 Access Point Mode Figure 12 Menu: Access Point Mode The following table describes the sub-menus. Table 10 Navigation Panel: Access Point Mode LINK Status TAB Status FUNCTION This screen shows the WRE6606s general device, system and interface status information. MONITOR Monitor Packet Statistics Packet Statistics Use this screen to view port status, packet specific statistics, the "system up time" and so on. CONFIGURATION Network Wireless LAN 2.4G General MAC Filter Advanced QoS WPS WPS Device Scheduling Guest WLAN General MAC Filter Advanced QoS WPS WPS Device Scheduling Guest WLAN IP OneConnect Wireless LAN 5G LAN OneConnect MAINTENANCE Use this screen to configure general wireless LAN and wireless security settings. Use this screen to configure the WRE6606 to block access to devices or block the devices from accessing the WRE6606. Use this screen to configure advanced wireless settings. Use this screen to enable Wi-Fi MultiMedia Quality of Service (WMMQoS). Use this screen to enable and configure WPS. Use this screen to add a wireless station using WPS. Use this screen to schedule the times the Wireless LAN is enabled or disabled. Use this screen to configure multiple BSSs on the WRE6606. Use this screen to configure general wireless LAN settings. Use this screen to configure the WRE6606 to block access to devices or block the devices from accessing the WRE6606. Use this screen to configure advanced wireless settings. Use this screen to enable Wi-Fi MultiMedia Quality of Service (WMMQoS). Use this screen to enable and configure WPS. Use this screen to add a wireless station using WPS. Use this screen to schedule the times the Wireless LAN is enabled or disabled. Use this screen to configure multiple BSSs on the WRE6606. Use this screen to configure LAN IP address and subnet mask. Use this screen to enable or disable Wi-Fi auto-configuration. General General Use this screen to view and change administrative settings such as system and domain names. WRE6606 Users Guide 25 Chapter 4 Access Point Mode Table 10 Navigation Panel: Access Point Mode LINK FUNCTION Use this screen to change the password of your WRE6606. Password Time Firmware Upgrade Backup Restore Restart TAB Password Setup Time Setting Firmware Upgrade Backup Restore Restart Use this screen to change your WRE6606s time and date. Use this screen to upload firmware to your WRE6606. Use this screen to backup and restore the configuration or reset your WRE6606 to the factory defaults. Use this screen to reboot the WRE6606 without turning the power off. WRE6606 Users Guide 26 CHAPTER 5 Client Mode 5.1 Overview Your WRE6606 can act as a wireless client. In wireless client mode, it can connect to an existing network via an access point. Use this mode if you already have an access point or wireless router in your network. In the example below, one WRE6606 (A) is configured as a wireless client and another is used as an access point (B). The WRE6606 has two clients that need to connect to the Internet. The WRE6606 wirelessly connects to the available access point (B). Figure 13 Wireless Client Mode A B After the WRE6606 and the access point connect, the WRE6606 acquires its WAN IP address from the access point. The clients of the WRE6606 can now surf the Internet. 5.2 What You Can Do Use the Status screen (Section 5.4 on page 28) to view read-only information about your WRE6606. Use the LAN screen (Chapter 11 on page 78) to set the IP address for your WRE6606. Use the Wireless LAN screens (Chapter 10 on page 56) to associate your WRE6606 (acting as a wireless client) with an existing access point. 5.3 What You Need to Know With the exception of the Wireless LAN, LAN, Monitor, Configuration and Maintenance screens, other configuration screens in Client mode are similar to the ones in Access Point Mode. See Chapter 3 on page 19 of this Users Guide. WRE6606 Users Guide 27 Chapter 5 Client Mode 5.3.1 Setting your WRE6606 to Client Mode 1 2 To use your WRE6606 as a wireless client, see Section 3.1.1.1 on page 20. Connect your computer to the LAN port of the WRE6606. 3 Open a web browser such as Internet Explorer and type http://zyxelsetup as the web address in your web browser. 4 5 Enter 1234 (default) as the password and click Login. Type a new password and retype it to confirm, then click Apply. Otherwise, click Ignore. Note: You have to log into the Web Configurator again when you change modes. As soon as you do, your WRE6606 is already in Client mode. Note: The client mode IP address is always the same as the access point mode IP address. If you changed the IP address of your WRE6606 while in access point mode, use this IP address in client mode. 5.4 Client Mode Status Screen Click to open the Status screen. Figure 14 Status Screen: Client Mode WRE6606 Users Guide 28 Chapter 5 Client Mode The following table describes the labels shown in the Status screen. Table 11 Status Screen: Access Point Mode LABEL DESCRIPTION Select a number of seconds or None from the drop-down list box to refresh all screen statistics automatically at the end of every time interval or to not refresh the screen statistics. Click this button to refresh the status screen statistics. Device Information Host Name Firmware Version Sys OP Mode LAN Information MAC Address IP Address IP Subnet Mask Default Gateway DHCP WLAN 2.4G Information This is the WRE6606s system name you configure in the Maintenance > General screen. This is the firmware version and the date created. This is the device mode (Section 3.1.1 on page 19) to which the WRE6606 is set -
Client Mode. This shows the LAN Ethernet adapter MAC Address of your device. This shows the LAN ports IP address. This shows the LAN ports subnet mask. This shows the LAN ports gateway IP address. This shows the LAN ports DHCP role - Client or None. To AP Connection To AP SSID This displays whether the WRE6606 is connected to an AP or not. This displays the SSID of the connected AP. To AP Security WLAN 5G Information To AP Connection To AP SSID To AP Security System Status Item Data System Up Time Current Date/Time System Resource CPU Usage Memory Usage Click the Release_Configuration button to remove all configured wireless and wireless security settings for WPS connections on the WRE6606. This displays the type of established security protocol with the AP. This displays whether the WRE6606 is connected to an AP or not. This displays the SSID of the connected AP. Click the Release_Configuration button to remove all configured wireless and wireless security settings for WPS connections on the WRE6606. This displays the type of established security protocol with the AP. This column shows the type of data the WRE6606 is recording. This column shows the actual data recorded by the WRE6606. This is the total time the WRE6606 has been on. This field displays your WRE6606s present date and time. This displays what percentage of the WRE6606s processing ability is currently used. When this percentage is close to 100%, the WRE6606 is running at full load, and the throughput is not going to improve anymore. If you want some applications to have more throughput, you should turn off other applications (for example, using bandwidth management. This shows what percentage of the heap memory the WRE6606 is using. WRE6606 Users Guide 29 Chapter 5 Client Mode 5.4.1 Navigation Panel Use the menu in the navigation panel to configure WRE6606 features in Client mode. The following screen and table show the features you can configure in Client mode. Figure 15 Menu: Client Mode The following table describes the sub-menus. Table 12 Navigation Panel: Access Point Mode LINK Status TAB Status FUNCTION This screen shows the WRE6606s general device, system and interface status information. MONITOR Monitor Packet Statistics Packet Statistics Use this screen to view port status, packet specific statistics, the "system up time" and so on. CONFIGURATION Network Wireless LAN 2.4G Wireless LAN 5G AP Select AP Select LAN OneConnect MAINTENANCE IP OneConnect General General Password Time Firmware Upgrade Backup Restore Restart Password Setup Time Setting Firmware Upgrade Backup Restore Restart Use this screen to choose an access point that you want the WRE6606 to connect to. Use this screen to choose an access point that you want the WRE6606 to connect to. Use this screen to configure LAN IP address and subnet mask. Use this screen to enable or disable Wi-Fi auto-configuration. Use this screen to view and change administrative settings such as system and domain names. Use this screen to change the password of your WRE6606. Use this screen to change your WRE6606s time and date. Use this screen to upload firmware to your WRE6606. Use this screen to backup and restore the configuration or reset your WRE6606 to the factory defaults. Use this screen to reboot the WRE6606 without turning the power off. WRE6606 Users Guide 30 CHAPTER 6 Repeater Mode 6.1 Overview In repeater mode, your WRE6606 can act as an access point and wireless client at the same time. The WRE6606 can connect to an existing network through another access point and also lets wireless clients connect to the network through it. This helps you expand wireless coverage when you have an access point or wireless router already in your network. In the example below, the WRE6606 (A) is configured as a repeater. It has three clients that want to connect to the Internet. The WRE6606 wirelessly connects to the available access point (B). Figure 16 Repeater Mode A B After the WRE6606 and the access point connect, the WRE6606 acquires its IP address from the access point. The clients of the WRE6606 can now surf the Internet. 6.2 What You Can Do Use the Status screen (Section 6.4 on page 33) to view read-only information about your WRE6606. Use the LAN screen (Chapter 11 on page 78) to set the IP address for your WRE6606. Use the Wireless LAN > WPS screen (Section 10.10 on page 72) to configure WPS on the WRE6606 to associate to another access point. Use the Wireless LAN > AP Select screen (Section 10.6 on page 65) to scan for available access points within transmission range and connect to an AP. Use other Wireless LAN screens (Section 10.4 on page 59) to configure the wireless settings and wireless security between the wireless clients and the WRE6606. WRE6606 Users Guide 31 Chapter 6 Repeater Mode 6.3 What You Need to Know With the exception of the AP Select and System Mode screen, other configuration screens in Repeater mode are similar to the ones in Access Point Mode. See Chapter 3 on page 19 of this Users Guide. 6.3.1 Setting your WRE6606 to Repeater Mode 1 2 To use your WRE6606 as a repeater, see Section 3.1.1.1 on page 20. Connect your computer to the LAN port of the WRE6606. 3 Open a web browser such as Internet Explorer and type http://zyxelsetup or http://192.168.1.2 as the web address in your web browser. 4 5 Enter 1234 (default) as the password and click Login. Type a new password and retype it to confirm, then click Apply. Otherwise, click Ignore. Note: You have to log in to the Web Configurator again when you change modes. As soon as you do, your WRE6606 is already in Repeater mode. Note: If a client is connected to the WRE6606 through the wired Ethernet connection, the client can only access the 2.4 GHz Wi-Fi. In the following figure, the LAN Client is only able to communicate with devices in the 2.4 GHz wireless network. Figure 17 Repeater Mode Overview 5 GHz 2.4 GHz 5 GHz 5 GHz 5 GHz AP WRE 2.4 GHz 2.4 GHz 2.4 GHz AP LAN Client 6.3.2 Configuring your WLAN, LAN and Maintenance Settings See Chapter 10 on page 56 and Chapter 11 on page 78 for information on configuring your wireless network and LAN settings. See Chapter 13 on page 82 for information on configuring your Maintenance settings. WRE6606 Users Guide 32 Chapter 6 Repeater Mode 6.4 Repeater Mode Status Screen Click to open the Status screen. Figure 18 Status: Repeater Mode The following table describes the labels shown in the Status screen. Table 13 Status Screen: Repeater Mode DESCRIPTION LABEL Select a number of seconds or None from the drop-down list box to refresh all screen statistics automatically at the end of every time interval or to not refresh the screen statistics. Click this button to refresh the status screen statistics. Device Information Host Name Firmware Version Sys OP Mode LAN Information MAC Address IP Address IP Subnet Mask Default Gateway This is the WRE6606s system name you configure in the Maintenance >
General screen. This is the firmware version and the date created. This is the device mode (Section 3.1.1 on page 19) to which the WRE6606 is set - Repeater Mode. This shows the LAN Ethernet adapter MAC Address of your device. This shows the LAN ports IP address. This shows the LAN ports subnet mask. This shows the LAN ports gateway IP address. WRE6606 Users Guide 33 Chapter 6 Repeater Mode Table 13 Status Screen: Repeater Mode LABEL DESCRIPTION This shows the LAN ports DHCP role - Client or None. DHCP WLAN 2.4G Information MAC Address SSID Channel Security To AP Connection To AP SSID To AP Security WLAN 5G Information MAC Address SSID Channel Security To AP Connection To AP SSID To AP Security System Status Item Data System Up Time Current Date/Time System Resource CPU Usage Memory Usage Interface Status Interface Status This shows the wireless adapter MAC Address of your WRE6606. This shows a descriptive name used to identify the WRE6606 in the wireless LAN. This shows the channel number which you select manually or the WRE6606 automatically scans and selects. This shows the level of wireless security the WRE6606 is using. This displays whether the WRE6606 is connected to an AP or not. This displays the SSID of the connected AP. Click the Release_Configuration button to remove all configured wireless and wireless security settings for WPS connections on the WRE6606. This displays the type of established security protocol with the AP. This shows the wireless adapter MAC Address of your WRE6606. This shows a descriptive name used to identify the WRE6606 in the wireless LAN. This shows the channel number which you select manually or the WRE6606 automatically scans and selects. This shows the level of wireless security the WRE6606 is using. This displays whether the WRE6606 is connected to an AP or not. This displays the SSID of the connected AP. Click the Release_Configuration button to remove all configured wireless and wireless security settings for WPS connections on the WRE6606. This displays the type of established security protocol with the WRE6606. This column shows the type of data the WRE6606 is recording. This column shows the actual data recorded by the WRE6606. This is the total time the WRE6606 has been on. This field displays your WRE6606s present date and time. This displays what percentage of the WRE6606s processing ability is currently used. When this percentage is close to 100%, the WRE6606 is running at full load, and the throughput is not going to improve anymore. If you want some applications to have more throughput, you should turn off other applications
(for example, using bandwidth management. This shows what percentage of the heap memory the WRE6606 is using. This displays the WRE6606 port types. The port types are: LAN and WLAN. For the LAN port, this field displays Down (line is down) or Up (line is up or connected). For the WLAN, it displays Up when the WLAN is enabled or Down when the WLAN is disabled. WRE6606 Users Guide 34 Chapter 6 Repeater Mode Table 13 Status Screen: Repeater Mode LABEL DESCRIPTION For the LAN ports, this displays the port speed and duplex setting or is left Rate blank when the line is disconnected. For the WLAN, it displays the maximum transmission rate when the WLAN is enabled and is left blank when the WLAN is disabled. Association List 2.4G
#
MAC Address Association Time Association List 5G
#
MAC Address Association Time This is the index number of an associated wireless station. This field displays the MAC address of an associated wireless station. This field displays the time a wireless station first associated with the WRE6606s WLAN network. This is the index number of an associated wireless station. This field displays the MAC address of an associated wireless station. This field displays the time a wireless station first associated with the WRE6606s WLAN network. 6.4.1 Navigation Menus Use the menu in the navigation panel to configure WRE6606 features in Repeater mode. The following screen and table show the features you can configure in Repeater mode. Figure 19 Menus: Repeater Mode The following table describes the sub-menus. Table 14 Menus: Repeater Mode LINK Status TAB Status FUNCTION This screen shows the WRE6606s general device, system and interface status information. MONITOR Monitor Packet Statistics Packet Statistics Use this screen to view port status, packet specific statistics, the "system up time" and so on. CONFIGURATION Network WRE6606 Users Guide 35 Chapter 6 Repeater Mode FUNCTION Use this screen to configure general wireless LAN and wireless security settings. Use this screen to choose an access point that you want the WRE6606 to connect to. Use this screen to configure the WRE6606 to block access to devices or block the devices from accessing the WRE6606. Use this screen to configure advanced wireless settings. Use this screen to enable Wi-Fi MultiMedia Quality of Service (WMMQoS). Use this screen to enable WPS. Use this screen to add a wireless station using WPS. Use this screen to configure general wireless LAN settings. Use this screen to choose an access point that you want the WRE6606 to connect to. Use this screen to configure the WRE6606 to block access to devices or block the devices from accessing the WRE6606. Use this screen to configure advanced wireless settings. Use this screen to enable Wi-Fi MultiMedia Quality of Service (WMMQoS). Use this screen to enable WPS. Use this screen to add a wireless station using WPS. Use this screen to configure LAN IP address and subnet mask. Use this screen to enable or disable Wi-Fi auto-configuration. Use this screen to view and change administrative settings such as system and domain names. Use this screen to change the password of your WRE6606. Use this screen to change your WRE6606s time and date. Use this screen to upload firmware to your WRE6606. Table 14 Menus: Repeater Mode LINK TAB General AP Select MAC Filter Advanced QoS WPS WPS Device General AP Select MAC Filter Advanced QoS WPS WPS Device IP OneConnect Wireless LAN 2.4G Wireless LAN 5G LAN OneConnect MAINTENANCE General General Password Time Firmware Upgrade Backup Restore Password Setup Time Setting Firmware Upgrade Backup Restore Restart Restart System Mode System Mode Use this screen to select how you want to use your WRE6606. Use this screen to backup and restore the configuration or reset your WRE6606 to the factory defaults. Use this screen to reboot the WRE6606 without turning the power off. WRE6606 Users Guide 36 CHAPTER 7 eaZy123 Wizard Setup 7.1 Overview This chapter provides information on the wizard setup screens in the Web Configurator. The Web Configurators wizard setup helps you configure your device. 7.2 Accessing the Wizard Launch your web browser and type "http://zyxelsetup" or http://192.168.1.2 as the website address. See Section 2.2 on page 13 for detailed information. Note: The wizard appears when the WRE6606 is accessed for the first time or when you reset the WRE6606 to its default factory settings. The wizard screen opens. Note: If you have already configured the wizard screens and want to open it again, click
) on the upper right corner of any Web Configurator the eaZy123 icon (
screen. 7.3 Using the Wizard The eaZy123 wizard for the WRE6606 is available in AP mode, Client mode, and Repeater mode. 7.3.1 AP Mode 1 Configure the wireless settings between the WRE6606 and its wireless clients. The WRE6606 automatically copies the SSID of the associated AP and appends .speed to the 5GHz SSID. Click Apply. WRE6606 Users Guide 37 Chapter 7 eaZy123 Wizard Setup 2 The eaZy 123 setup wizard is complete. Verify the WRE6606s wireless network settings and click GO to log into the web configurator again. WRE6606 Users Guide 38 Chapter 7 eaZy123 Wizard Setup 7.3.2 Client Mode 1 The wizard scans for available Wi-Fi networks and displays the network list. Select a 2.4 GHz Wi-Fi network to which you want the WRE6606 to connect to extend the network. Click Continue. If the wireless router or AP you want to connect to is not listed, click Choose Network Manually and go to step 3 to configure the SSID and security settings manually. If you dont want to associate with a 2.4 GHz network, click Skip 2.4 GHz. 2 Type the selected networks Wi-Fi password (key) if wireless security is enabled. Click Continue. WRE6606 Users Guide 39 Chapter 7 eaZy123 Wizard Setup 3 If you click Choose Network Manually, the following screen displays. Enter the SSID and security settings of your wireless router or AP. Click Continue. 4 5 The 5 GHz setup screen displays. Repeat previous steps to select and connect to a 5 GHz Wi-Fi network. The eaZy 123 setup wizard is complete. Click GO to log into the web configurator again. WRE6606 Users Guide 40 Chapter 7 eaZy123 Wizard Setup 7.3.3 Repeater Mode 1 The wizard scans for available Wi-Fi networks and displays the network list. Select a 2.4 GHz Wi-Fi network to which you want the WRE6606 to connect to extend the network. Click Continue. If the wireless router or AP you want to connect to is not listed, click Choose Network Manually and go to step 3 to configure the SSID and security settings manually. If you dont want to associate with a 2.4 GHz network, click Skip 2.4 GHz. WRE6606 Users Guide 41 Chapter 7 eaZy123 Wizard Setup 2 Type the selected networks Wi-Fi password (key) if wireless security is enabled. Click Continue. 3 If you click Choose Network Manually, the following screen displays. Enter the SSID and security settings of your wireless router or AP. Click Continue. WRE6606 Users Guide 42 Chapter 7 eaZy123 Wizard Setup 4 5 The 5 GHz setup screen displays. Repeat previous steps to select and connect to a 5 GHz Wi-Fi network. Configure the wireless settings between the WRE6606 and its wireless clients. The WRE6606 automatically copies the SSID of the associated AP and appends .speed to the 5GHz SSID. Click Apply. WRE6606 Users Guide 43 Chapter 7 eaZy123 Wizard Setup 6 The eaZy 123 setup wizard is complete. Verify the WRE6606s wireless network settings and click GO to log into the web configurator again. WRE6606 Users Guide 44 CHAPTER 8 Tutorials 8.1 Overview This chapter provides tutorials for your WRE6606 as follows (in access point or repeater mode) as follows:
Connecting to the Internet from an Access Point Connecting to a Wireless Network Using WPS Connecting the WRE6606 to an AP This chapter provides tutorials for your WRE6606 (in client mode) as follows:
Connecting the WRE6606 (in Client Mode) to an AP or Wireless Router 8.2 Connecting to the Internet from an Access Point This section gives you an example of how to set up an access point (AP) and wireless client (a notebook (B), in this example) for wireless communication. B can access the Internet through the access point (A) wirelessly. Figure 20 Wireless Access Point Connection to the Internet 8.3 Connecting to a Wireless Network Using WPS This section gives you an example of how to set up wireless network using WPS. The following example uses the WRE6606 as the AP and NWD-211AN as the wireless client which connects to a notebook. Note: The wireless client must be a WPS-aware device (for example, a WPS USB adapter or PCI card). The following WPS methods for creating a secure connection are described in the tutorial. WRE6606 Users Guide 45 Chapter 8 Tutorials Push Button Configuration (PBC) - create a secure wireless network simply by pressing a button. See Section 8.3.1 on page 46.This is the easier method. PIN Configuration - create a secure wireless network simply by entering a wireless client's PIN
(Personal Identification Number) in the WRE6606s interface. See Section 8.3.2 on page 47. This is the more secure method, since one device can authenticate the other. 8.3.1 Push Button Configuration (PBC) The push button configuration function found in the interfaces is available both in AP mode and Repeater mode. The WPS button, see Section 1.3 on page 10, can also be used for PBC configurations in either AP or Repeater mode. 1 Make sure that your WRE6606 is turned on and set to work in AP mode and that it is connected to your network. 2 3 4 Launch your wireless clients configuration utility. In the wireless client utility, find the WPS settings. Enable WPS and press the WPS button (Start or WPS button). Log into WRE6606s Web Configurator. Make sure WPS is enabled in the Network > Wireless LAN
> WPS screen. 5 Navigate to Network > Wireless LAN 2.4G or Wireless LAN 5G > WPS Device and press the WPS button. Note: Your WRE6606 has a WPS button located on its panel, as well as a WPS button in its configuration utility. Both buttons have exactly the same function; you can use one or the other. Note: It doesnt matter which button is pressed first. You must press the second button within two minutes of pressing the first one. The WRE6606 sends the proper configuration settings to the wireless client. This may take up to two minutes. Then the wireless client is able to communicate with the WRE6606 securely. The following figure shows you how to set up wireless network and security by pressing a button on both WRE6606 and wireless client (the NWD-211AN in this example). WRE6606 Users Guide 46 Chapter 8 Tutorials Figure 21 Example WPS Process: PBC Method Wireless Client AP WITHIN 2 MINUTES SECURITY INFO COMMUNICATION 8.3.2 PIN Configuration When you use the PIN configuration method, you need to use both WRE6606s configuration interface and the clients utilities. The push button configuration function is available both in AP mode and Repeater mode. 1 Launch your wireless clients configuration utility. Go to the WPS Station settings and select the PIN method to get a PIN number. 2 On the WRE6606, navigate to the Network > Wireless LAN 2.4G or Wireless LAN 5G > WPS screen. 3 Obtain the PIN number for the WRE6606 or press the Generate button to create a new PIN number. See Section 10.10 on page 72 4 Enter the WRE6606 PIN number in the wireless stations utility screen. The WRE6606 authenticates the wireless client and sends the proper configuration settings to the wireless client. This may take up to two minutes. Then the wireless client is able to communicate with the WRE6606 securely. WRE6606 Users Guide 47 Chapter 8 Tutorials The following figure shows an example of how to set up wireless network and security on WRE6606 and wireless client (ex. NWD210N in this example) by using PIN method. Figure 22 Example WPS Process: PIN Method Wireless Client WITHIN 2 MINUTES Authentication by PIN SECURITY INFO COMMUNICATION 8.4 Connecting the WRE6606 to an AP Repeater mode allows you to extend the original AP coverage. Selecting an AP from an Automatically Detected List - create a secure wireless network simply by selecting an AP from a list of detected APs. See Section 8.4.1 on page 49.This is the easier method. WRE6606 Users Guide 48 Chapter 8 Tutorials Selecting an AP by Manually Entering Security Information - create a secure wireless network by manually entering the APs wireless security settings in the WRE6606s interface. See Section 8.4.2 on page 50. This is useful when the AP is hidden. 8.4.1 Selecting an AP from an Automatically Detected List This section demonstrates the procedures in Repeater mode. Follow the steps below to create a secure wireless network by selecting an AP from a list of detected APs. The AP select function is available both in Client mode and Repeater mode. See Section 3.1.1 on page 19. The instructions require that your hardware is connected (see the Quick Start Guide) and you are logged into the Web Configurator through your LAN connection (see Section 2.2 on page 13). 1 Open the Network > Wireless LAN 2.4G or Wireless LAN 5G > AP Select screen. Select an AP form the Select column and click Continue. Figure 23 Tutorial: Selecting an automatically detected AP 2 Type the Wi-Fi key if wireless security is enabled on the selected AP and click Continue. Figure 24 Tutorial: The KEY field 3 Configure the wireless settings between the WRE6606 and its wireless clients. The WRE6606 automatically copies the SSID of the associated AP and appends .speed to the 5GHz SSID. Click Apply to save settings and restart the WRE6606. WRE6606 Users Guide 49 Chapter 8 Tutorials Figure 25 Tutorial: Configure WRE6606s WLAN 4 You have successfully set up your WRE6606 to connect to an AP. Click GO to go to the Status screen. Figure 26 Tutorial: Saving settings 8.4.2 Selecting an AP by Manually Entering Security Information This example shows you how to configure wireless security settings with the following parameters on your WRE6606. SSID Security Wi-Fi Key ZyXEL WPA(2)-PSK 1234567890 Follow the steps below to create a secure wireless network by manually entering the APs wireless security settings in the WRE6606s interface. The instructions require that your hardware is connected (see the Quick Start Guide) and you are logged into the Web Configurator through your LAN connection (see Section 2.2 on page 13). 1 Open the Network > Wireless LAN 2.4G or Wireless LAN 5G > AP Select screen. Select Choose Network Manually. WRE6606 Users Guide 50 Chapter 8 Tutorials Figure 27 Tutorial: Manually Entering Wireless Security Information 2 Type the SSID of the AP into the Wireless Name (SSID) field, set the security settings and click Continue. Figure 28 Tutorial: Typing an SSID 3 Configure the wireless settings between the WRE6606 and its wireless clients. The WRE6606 automatically copies the SSID of the associated AP and appends .speed to the 5GHz SSID. Click Apply to save settings and restart the WRE6606. Figure 29 Tutorial: Configure WRE6606s WLAN 4 You have successfully set up your WRE6505 v2 to connect to an AP. Click GO to go to the Status screen. WRE6606 Users Guide 51 Chapter 8 Tutorials Figure 30 Tutorial: Saving settings 8.5 Connecting the WRE6606 (in Client Mode) to an AP or Wireless Router If you have an access point or wireless router with Internet access deployed in your network already, and you want to use the WRE6606 as a wireless client to connect to the existing AP or wireless router, set the WRE6606 to client mode. The WRE6606 then acts as a wireless client. Your device, such as a computer, can connect to the WRE6606 through a wired connection to access the Internet. 1 2 Set your WRE6606 to work as a wireless client. See Section 2.1.1.1 on page 14. Connect your computer to the LAN port of the WRE6606 using an Ethernet cable. 3 Open a web browser such as Internet Explorer and type http://zyxelsetup as the web address in your web browser. 4 5 6 Enter 1234 (default) as the password and click Login. Type a new password and retype it to confirm, then click Apply. Otherwise, click Ignore. To connect to a specific wireless network, you can manually create a wireless profile or use the site survey tool to associate with it. WRE6606 Users Guide 52 PART II Technical Reference 53 CHAPTER 9 Monitor 9.1 Overview This chapter discusses read-only information related to the device state of the WRE6606. 9.2 What You Can Do use the Packet Statistics screen (Section 9.3 on page 54) to view port status, packet specific statistics, the "system up time" and so on. 9.3 Packet Statistics Screen Click Monitor > Packet Statistics. Read-only information here includes port status, packet specific statistics and the "system up time". The Poll Interval(s) field is configurable and is used for refreshing the screen. Figure 31 Monitor > Packet Statistics WRE6606 Users Guide 54 Chapter 9 Monitor The following table describes the labels in this screen. Table 15 Monitor > Packet Statistics LABEL Port Status DESCRIPTION This is the WRE6606s port type. For the LAN ports, this displays the port speed or Down when the line is disconnected. TxPkts RxPkts Collisions Tx kb/s Rx kb/s System Up Time Poll Interval(s) Refresh Now For the WLAN, it displays the maximum transmission rate when the WLAN is enabled and Down when the WLAN is disabled. This is the number of transmitted packets on this port. This is the number of received packets on this port. This is the number of collisions on this port. This displays the transmission speed in kilobits per second on this port. This displays the reception speed in kilobits per second on this port. This is the total time the WRE6606 has been on. Select the time interval in seconds for refreshing statistics in this field. Click this button to update the screen statistics immediately. WRE6606 Users Guide 55 CHAPTER 10 Wireless LAN 10.1 Overview This chapter discusses how to configure the wireless network settings in your WRE6606. See Section 1.1 on page 9 for an overview of wireless networks. 10.2 What You Can Do Use the General screen to enable the Wireless LAN (2.4G/5G), enter the SSID and select the wireless security mode (Section 10.4 on page 59). Use the AP select screen to choose an access point that you want the WRE6606 (in Client mode and Repeater mode) to connect to. You should know the security settings of the target AP
(Section 10.6 on page 65). Use the MAC Filter screen to allow or deny wireless stations based on their MAC addresses from connecting to the WRE6606 (Section 10.7 on page 69). Use the Advanced screen to allow intra-BSS networking and set the RTS/CTS Threshold (Section 10.8 on page 70). Use the QoS screen to enable Wi-Fi MultiMedia Quality of Service (WMMQoS). This allows the WRE6606 to automatically set priority levels to services, such as e-mail, VoIP, chat, and so on
(Section 10.9 on page 71). Use the WPS screen to enable WPS to quickly set up a wireless network with strong security, without having to configure security settings manually (Section 10.10 on page 72). Use the WPS Device screen to add a wireless station using WPS (Section 10.11 on page 73). Use the Scheduling screen to set the times your wireless LAN is turned on and off (Section 10.12 on page 74). This screen is available only when the WRE6606 is in AP mode. Use the Guest WLAN screen to configure multiple BSSs on the WRE6606 (Section 10.13 on page 75). This screen is available only when the WRE6606 is in AP mode. 10.3 What You Should Know Every wireless network must follow these basic guidelines. Every wireless client in the same wireless network must use the same SSID. The SSID is the name of the wireless network. It stands for Service Set IDentity. If two wireless networks overlap, they should use different channels. Like radio stations or television channels, each wireless network uses a specific channel, or frequency, to send and receive information. WRE6606 Users Guide 56 Chapter 10 Wireless LAN Every wireless client in the same wireless network must use security compatible with the AP. Security stops unauthorized devices from using the wireless network. It can also protect the information that is sent in the wireless network. 10.3.1 Wireless Security Overview The following sections introduce different types of wireless security you can set up in the wireless network. 10.3.1.1 MAC Address List Every wireless client has a unique identification number, called a MAC address.1 A MAC address is usually written using twelve hexadecimal characters2; for example, 00A0C5000002 or 00:A0:C5:00:00:02. To get the MAC address for each wireless client, see the appropriate Users Guide or other documentation. You can use the MAC Address List to tell the AP which wireless clients are allowed to use the wireless network. If a wireless client is allowed to use the wireless network, it still has to have the correct settings (SSID, channel, and security). If a wireless client is not allowed to use the wireless network, it does not matter if it has the correct settings. This type of security does not protect the information that is sent in the wireless network. Furthermore, there are ways for unauthorized devices to get the MAC address of an authorized wireless client. Then, they can use that MAC address to use the wireless network. 10.3.1.2 Encryption Wireless networks can use encryption to protect the information that is sent in the wireless network. Encryption is like a secret code. If you do not know the secret code, you cannot understand the message. Table 16 Types of Encryption for Each Type of Authentication Weakest Strongest NO AUTHENTICATION No Security Static WEP WPA-PSK WPA2-PSK For example, if users do not log in to the wireless network, you can choose no authentication, if users do log on to the wireless network, you can choose No Security, Static WEP, WPA-PSK, or WPA2-PSK. Usually, you should set up the strongest encryption that every wireless client in the wireless network supports. Suppose the wireless network has two wireless clients. Device A only supports WEP, and device B supports WEP and WPA-PSK. Therefore, you should set up Static WEP in the wireless network. 1. Some wireless devices, such as scanners, can detect wireless networks but cannot use wireless networks. These kinds of wireless devices might not have MAC addresses. 2. Hexadecimal characters are 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, A, B, C, D, E, and F. WRE6606 Users Guide 57 Chapter 10 Wireless LAN Note: It is recommended that wireless networks use WPA-PSK, or stronger encryption. IEEE 802.1x and WEP encryption are better than none at all, but it is still possible for unauthorized devices to figure out the original information pretty quickly. Many types of encryption use a key to protect the information in the wireless network. The longer the key, the stronger the encryption. Every wireless client in the wireless network must have the same key. 10.3.1.3 WPS Wi-Fi Protected Setup (WPS) is an industry standard specification, defined by the Wi-Fi Alliance. WPS allows you to quickly set up a wireless network with strong security, without having to configure security settings manually. Depending on the devices in your network, you can either press a button (on the device itself, or in its configuration utility) or enter a PIN (Personal Identification Number) in the devices. Then, they connect and set up a secure network by themselves. See how to set up a secure wireless network using WPS in the Section 8.3 on page 45. 10.3.2 Guest WLAN Guest WLAN allows you to set up a wireless network where users can access to Internet via the WRE6606 (Z), but not other networks connected to the Z. In the following figure, a guest user can access the Internet from the guest wireless network A via Z but not the home or company network N. Note: Note: The home or company network N and Guest WLAN network are independent networks. Note: Note: Only AP mode supports Guest WLAN. Figure 32 Guest Wireless LAN Network WRE6606 Users Guide 58 Chapter 10 Wireless LAN 10.4 General Wireless LAN Screen Use this screen to enable the Wireless LAN, enter the SSID and select the wireless security mode. Note: If you are configuring the WRE6606 from a computer connected to the wireless LAN and you change the WRE6606s SSID, channel or security settings, you will lose your wireless connection when you press Apply to confirm. You must then change the wireless settings of your computer to match the WRE6606s new settings. Click Network > Wireless LAN 2.4G or Wireless LAN 5G to open the General screen. Figure 33 Network > Wireless LAN 2.4G/5G > General (Repeater Mode) WRE6606 Users Guide 59 Chapter 10 Wireless LAN Figure 34 Network > Wireless LAN 2.4G/5G > General (AP Mode) The following table describes the general wireless LAN labels in this screen. DESCRIPTION Table 17 Network > Wireless LAN 2.4G/5G > General LABEL Wireless Setup Wireless LAN Network Name
(SSID) This is turned on by default. Click Disable to turn off the wireless LAN function. The SSID (Service Set IDentity) identifies the Service Set with which a wireless client is associated. Enter a descriptive name (up to 32 printable characters found on a typical English language keyboard) for the wireless LAN. Hide SSID Channel Selection Auto Channel Selection Operating Channel Select this check box to hide the SSID in the outgoing beacon frame so a wireless client cannot obtain the SSID through scanning using a site survey tool. Set the operating frequency/channel depending on your particular region. Select a channel from the drop-down list box. The options vary depending on the frequency band and the country you are in. This option is only available when the WRE6606 is in AP mode and Auto Channel Selection is disabled. This option is available only when the WRE6606 is in AP mode. Select this option to have the WRE6606 automatically scan for and select a channel which is not used by another device. This displays the channel the WRE6606 is currently using. WRE6606 Users Guide 60 Chapter 10 Wireless LAN Table 17 Network > Wireless LAN 2.4G/5G > General (continued) LABEL Network Mode DESCRIPTION 2.4 GHz is the frequency used by IEEE 802.11b/g/n wireless clients. 5 GHz is the frequency used by IEEE 802.11ac/a/n wireless clients. Select 2.4 GHz (802.11b) to allow only IEEE 802.11b compliant WLAN devices to associate with the WRE6606. Select 2.4 GHz (802.11g) to allow only IEEE 802.11g compliant WLAN devices to associate with the WRE6606. Select 2.4 GHz (802.11n) to allow only IEEE 802.11n compliant WLAN devices to associate with the WRE6606. Select 2.4 GHz (802.11b/g) to allow both IEEE802.11b and IEEE802.11g compliant WLAN devices to associate with the WRE6606. The transmission rate of your WRE6606 might be reduced. Select 2.4 GHz (802.11b/g/n) to allow both IEEE802.11b, IEEE802.11g and IEEE802.11n compliant WLAN devices to associate with the WRE6606. The transmission rate of your WRE6606 might be reduced. Select 5 GHz (802.11a) to allow only IEEE 802.11a compliant WLAN devices to associate with the WRE6606. Select 5 GHz (802.11a/n) to allow both IEEE802.11a and IEEE802.11n compliant WLAN devices to associate with the WRE6606. The transmission rate of your WRE6606 might be reduced. Select 5 GHz (802.11a/n/ac) to allow both IEEE802.11a, IEEE802.11n and IEEE802.11ac compliant WLAN devices to associate with the WRE6606. The transmission rate of your WRE6606 might be reduced. Select the channel bandwidth you want to use for your wireless network. Select 20 MHz if you want to lessen radio interference with other wireless devices in your neighborhood. Select 40 MHz if you want to lessen radio interference with other wireless devices in your neighborhood. Select 20/40 MHz to allow the WRE6606 to choose the channel bandwidth (20 or 40 MHz) that has least interference. Select 20/40/80 MHz to allow the WRE6606 to choose the channel bandwidth (20 or 40 or 80 MHz) that has least interference. This option is available only when you select 5 GHz
(802.11a/n/ac) in the Network Mode field. If the WRE6606 is in repeater mode, select No Security or the available modes to match as provided by the source AP or wireless router. If the WRE6606 is in AP mode, select WPA2-PSK, WPA-PSK or Static WEP to add security on this wireless network. The wireless clients which want to associate to this network must have same wireless security settings as this device. After you select to use a security, additional options appears in this screen. See Section 10.5 on page 62 for detailed information on different security modes. Or you can select No Security to allow any client to associate this network without authentication. Note: If the WPS function is enabled (default), only No Security and WPA2-PSK are available in this field. Channel Bandwidth Security Security Mode WPA Compatible This field appears when you choose WPA2-PSK as the Security Mode. Check this field to allow wireless devices using WPA-PSK security mode to connect to your WRE6606. WRE6606 Users Guide 61 Chapter 10 Wireless LAN Table 17 Network > Wireless LAN 2.4G/5G > General (continued) LABEL Pre-Shared Key DESCRIPTION WPA-PSK/WPA2-PSK uses a simple common password for authentication. Type a pre-shared key from 8 to 63 case-sensitive keyboard characters. The Group Key Update Timer is the rate at which the AP sends a new group key out to all clients. Group Key Update Timer Apply Reset The default is 3600 seconds (60 minutes). Click Apply to save your changes back to the WRE6606. Click Reset to return to the previous menu without saving. 10.5 Wireless Security The screen varies depending on what you select in the Security Mode field. 10.5.1 No Security Select No Security to allow wireless clients to communicate with the access point without any data encryption. Note: If you do not enable any wireless security on your WRE6606, your network is accessible to any wireless networking device that is within range. Figure 35 Network > Wireless LAN 2.4G/5G > General: No Security The following table describes the labels in this screen. Table 18 Network > Wireless LAN 2.4G/5G > General: No Security LABEL Security Mode DESCRIPTION Choose No Security from the drop-down list box. WRE6606 Users Guide 62 Chapter 10 Wireless LAN Table 18 Network > Wireless LAN 2.4G/5G > General: No Security (continued) LABEL Apply Reset DESCRIPTION Click Apply to save your changes back to the WRE6606. Click Reset to reload the previous configuration for this screen. 10.5.2 WEP Encryption WEP encryption scrambles the data transmitted between the wireless stations and the access points to keep network communications private. It encrypts unicast and multicast communications in a network. Both the wireless stations and the access points must use the same WEP key. Your WRE6606 allows you to configure up to four 64-bit or 128-bit WEP keys but only one key can be enabled at any one time. Select Static WEP from the Security Mode list. Figure 36 Network > Wireless LAN 2.4G/5G > General: Static WEP WRE6606 Users Guide 63 Chapter 10 Wireless LAN The following table describes the wireless LAN security labels in this screen. Table 19 Network > Wireless LAN 2.4G/5G > General: Static WEP LABEL Security Mode PassPhrase DESCRIPTION Select Static WEP to enable data encryption. Enter a Passphrase (up to 26 printable characters) and click Generate. A passphrase functions like a password. In WEP security mode, it is further converted by the WRE6606 into a complicated string that is referred to as the key. This key is requested from all devices wishing to connect to a wireless network. Select 64-bits or 128-bits. This dictates the length of the security key that the network is going to use. Select Auto or Shared Key from the drop-down list box. This field specifies whether the wireless clients have to provide the WEP key to login to the wireless client. Keep this setting at Auto unless you want to force a key verification before communication between the wireless client and the WRE6606 occurs. Select Shared Key to force the clients to provide the WEP key prior to communication. Select this option in order to enter ASCII characters as WEP key. Select this option in order to enter hexadecimal characters as a WEP key. The preceding "0x", that identifies a hexadecimal key, is entered automatically. The WEP keys are used to encrypt data. Both the WRE6606 and the wireless stations must use the same WEP key for data transmission. If you chose 64-bits, then enter any 5 ASCII characters or 10 hexadecimal characters
("0-9", "A-F"). If you chose 128-bits, then enter 13 ASCII characters or 26 hexadecimal characters ("0-
9", "A-F"). You must configure at least one key, only one key can be activated at any one time. The default key is key 1. Click Apply to save your changes back to the WRE6606. Click Reset to reload the previous configuration for this screen. WEP Encryption Authentication Method ASCII Hex Key 1 to Key 4 Apply Reset 10.5.3 WPA-PSK/WPA2-PSK Select WPA-PSK or WPA2-PSK from the Security Mode list. WRE6606 Users Guide 64 Chapter 10 Wireless LAN Figure 37 Network > Wireless LAN 2.4G/5G > General: WPA-PSK/WPA2-PSK The following table describes the labels in this screen. Table 20 Network > Wireless LAN 2.4G/5G > General: WPA-PSK/WPA2-PSK LABEL Security Mode WPA Compatible DESCRIPTION Select WPA-PSK or WPA2-PSK to enable data encryption. This field appears when you choose WPA2-PSK as the Security Mode. Pre-Shared Key Check this field to allow wireless devices using WPA-PSK security mode to connect to your WRE6606. WPA-PSK/WPA2-PSK uses a simple common password for authentication. Group Key Update Timer Type a pre-shared key from 8 to 63 case-sensitive keyboard characters. The Group Key Update Timer is the rate at which the AP sends a new group key out to all clients. Apply Reset The default is 3600 seconds (60 minutes). Click Apply to save your changes back to the WRE6606. Click Reset to reload the previous configuration for this screen. 10.6 AP Select Screen Use this screen (available both in Client mode and Repeater mode.) to choose an access point that you want the WRE6606 to connect to. You should know the security settings of the target AP. To open this screen, click Network > Wireless LAN 2.4G or Wireless LAN 5G > AP Select. WRE6606 Users Guide 65 Chapter 10 Wireless LAN Figure 38 Network > Wireless LAN 2.4G/5G > AP Select (Repeater Mode) Figure 39 Network > Wireless LAN 2.4G/5G > AP Select (Client Mode) The following table describes the labels in this screen. Table 21 Network > Wireless LAN 2.4G/5G > AP Select (Client Mode and Repeater Mode) LABEL Select SSID DESCRIPTION Use the radio button to select the wireless device to which you want to connect. This displays the Service Set IDentity of the wireless device. The SSID is a unique name that identifies a wireless network. All devices in a wireless network must use the same SSID. WRE6606 Users Guide 66 Chapter 10 Wireless LAN Table 21 Network > Wireless LAN 2.4G/5G > AP Select (Client Mode and Repeater Mode) LABEL MAC Channel Mode DESCRIPTION This displays the MAC address of the wireless device. This displays the channel number used by this wireless device. This displays which IEEE 802.11b/g/n wireless networking standards the wireless device supports. This displays the type of security configured on the wireless device. When No Security is shown, no security is configured and you can connect to it without a password. This displays the strength of the wireless signal. The signal strength mainly depends on the antenna output power and the distance between your WRE6606 and this device. Click Continue to start the next step in the AP setup process. Click Scan Again to search for available wireless devices within transmission range and update this table. Select this to set up the AP manually. Security Mode Strength Continue Scan Again Choose Network Manually WPS This button is configurable only when you enable WPS in the Wireless LAN 2.4G/5G >
WPS screen. Click this button to connect to the selected AP via WPS. Enter a Wi-Fi key If wireless security is enabled on the selected AP, the following screen displays after you click Continue in the AP Select screen. Enter the APs Wi-Fi key and click Continue. Figure 40 Network > Wireless LAN 2.4G/5G > AP Select (Repeater Mode) Figure 41 Network > Wireless LAN 2.4G/5G > AP Select (Client Mode) Set up the WRE6606s WLAN for clients The following screen is available in Repeater mode only. Use this screen to configure the wireless settings between the WRE6606 and its wireless clients. The WRE6606 automatically copies the SSID of the associated AP. You can set the SSID and Wi-Fi key of the WRE6606s WLAN to be the same as those on the AP to which the WRE6606 wants to connect. Click Apply to save your settings. WRE6606 Users Guide 67 Chapter 10 Wireless LAN Figure 42 Network > Wireless LAN 2.4G/5G > AP Select (Repeater Mode) Choose AP network manually Use this screen to manually enter the SSID, security mode and Wi-Fi key of the AP to which you want the WRE6606 to connect. This is useful when the APs SSID is hidden. Click Continue to configure the wireless settings between the WRE6606 and its wireless clients (see Set up the WRE6606s WLAN for clients on page 67). Figure 43 Network > Wireless LAN 2.4G/5G > AP Select (Repeater Mode) Figure 44 Network > Wireless LAN 2.4G/5G > AP Select (Client Mode) Complete the AP and WLAN setup This screen displays when you have successfully set up your WRE6606 to connect to an AP. Verify the WRE6606s wireless network settings and click GO to open the Status screen. WRE6606 Users Guide 68 Chapter 10 Wireless LAN Figure 45 Network > Wireless LAN 2.4G/5G > AP Select (Repeater Mode) Figure 46 Network > Wireless LAN 2.4G/5G > AP Select (Client Mode) 10.7 MAC Filter The MAC Filter screen allows you to specify which devices are allowed to access the WRE6606, while denying access to all unspecified devices. Every Ethernet device has a unique MAC (Media Access Control) address. The MAC address is assigned at the factory and consists of six pairs of hexadecimal characters, for example, 00:A0:C5:00:00:02. You need to know the MAC address of the devices to configure this screen. To change your WRE6606s MAC Address List settings, click Network > Wireless LAN 2.4G or Wireless LAN 5G > MAC Filter. The screen appears as shown. Figure 47 Network > Wireless LAN 2.4G/5G > MAC Filter WRE6606 Users Guide 69 Chapter 10 Wireless LAN The following table describes the labels in this menu. Table 22 Network > Wireless LAN 2.4G/5G> MAC Filter LABEL SSID for MAC Filter Policy DESCRIPTION Select the SSID for which you want to configure MAC filtering. Define the filter action for the list of MAC addresses in the MAC Address table. Select Disable to deactivate the MAC filtering rule you configure below. Select Allow to permit access to the WRE6606, MAC addresses not listed will be denied access to the WRE6606. Select Reject to block access to the WRE6606, MAC addresses not listed will be allowed to access the WRE6606 Enter the MAC addresses of the wireless station that are allowed or denied access to the WRE6606 and click Add. Enter the MAC addresses in a valid MAC address format, that is, six hexadecimal character pairs, for example, 12:34:56:78:9a:bc. Add a station Mac Address MAC Filter Summary Delete MAC Address Apply Reset Click the delete icon to remove the MAC address from the list. This is the MAC address of the wireless station that are allowed or denied access to the WRE6606. Click Apply to save your changes back to the WRE6606. Click Reset to reload the previous configuration for this screen. 10.8 Wireless LAN Advanced Screen Use this screen to configure advanced wireless LAN parameters. Click Network > Wireless LAN 2.4G or Wireless LAN 5G > Advanced. The screen appears as shown. Figure 48 Network > Wireless LAN 2.4G/5G > Advanced WRE6606 Users Guide 70 Chapter 10 Wireless LAN The following table describes the labels in this screen. Table 23 Network > Wireless LAN 2.4G/5G > Advanced LABEL RTS/CTS Threshold DESCRIPTION Data with its frame size larger than this value will perform the RTS (Request To Send)/
CTS (Clear To Send) handshake. Enable Intra-BSS Traffic Blocking Enter a value between 1 and 2347. A Basic Service Set (BSS) exists when all communications between wireless clients or between a wireless client and a wired network client go through one access point (AP). Output Power Intra-BSS traffic is traffic between wireless clients in the BSS. When Intra-BSS traffic blocking is not enabled, wireless clients can access the wired network and communicate with each other. When Intra-BSS traffic blocking is enabled, wireless clients can still access the wired network but cannot communicate with each other. Set the output power of the WRE6606 in this field. If there is a high density of APs in an area, decrease the output power of the WRE6606 to reduce interference with other APs. Select one of the following 100%, 50% or 25%. See the product specifications for more information on your WRE6606s output power. HT (High Throughput) Physical Mode Guard Interval Select Auto to increase data throughput. However, this may make data transfer more prone to errors. Select Long to prioritize data integrity. This may be because your wireless network is busy and congested or the WRE6606 is located in an environment prone to radio interference. Click Apply to save your changes to the WRE6606. Click Reset to reload the previous configuration for this screen. Apply Reset 10.9 Quality of Service (QoS) Screen The QoS screen allows you to automatically give a service (such as VoIP and video) a priority level. Click Network > Wireless LAN 2.4G or Wireless LAN 5G > QoS. The following screen appears. Figure 49 Network > Wireless LAN 2.4G/5G > QoS The following table describes the labels in this screen. Table 24 Network > Wireless LAN 2.4G/5G > QoS LABEL Enable WMM QoS DESCRIPTION Check this to have the WRE6606 automatically give a service a priority level according to the ToS value in the IP header of packets it sends. WMM QoS (Wifi MultiMedia Quality of Service) gives high priority to voice and video, which makes them run more smoothly. WRE6606 Users Guide 71 Chapter 10 Wireless LAN Table 24 Network > Wireless LAN 2.4G/5G > QoS (continued) LABEL Apply Reset DESCRIPTION Click Apply to save your changes to the WRE6606. Click Reset to reload the previous configuration for this screen. 10.10 WPS Screen Use this screen to enable/disable WPS, view or generate a new PIN and check current WPS status. To open this screen, click Network > Wireless LAN 2.4G or Wireless LAN 5G > WPS tab. Note: Wireless clients cannot use WPS to set up a wireless network with the WRE6606 in universal repeater mode. Figure 50 Network > Wireless LAN 2.4G/5G > WPS (Repeater Mode) Figure 51 Network > Wireless LAN 2.4G/5G > WPS (AP Mode) WRE6606 Users Guide 72 Chapter 10 Wireless LAN The following table describes the labels in this screen. DESCRIPTION Table 25 Network > Wireless LAN 2.4G/5G > WPS LABEL WPS Setup Enable WPS Enable PIN PIN Number Select this to enable the WPS feature. Select this to enable the PIN number. This displays a PIN number last time system generated. Click Generate to generate a new PIN number. WPS Status Status Release Configuration
(AP mode only) 802.11 Mode SSID Security Apply Reset This displays Configured when the WRE6606 has connected to a wireless network using WPS or when Enable WPS is selected and wireless or wireless security settings have been changed. The current wireless and wireless security settings also appear in the screen. This displays Unconfigured if WPS is disabled and there are no wireless or wireless security changes on the WRE6606 or click Release Configuration (AP mode only) to remove the configured wireless and wireless security settings. This button is only available when the WPS status displays Configured. Click this button to remove all configured wireless and wireless security settings for WPS connections on the WRE6606. This is the 802.11 mode used. Only compliant WLAN devices can associate with the WRE6606. This is the name of the wireless network (the WAP3205 v2s first SSID). This is the type of wireless security employed by the network. Click Apply to save your changes back to the WRE6606. Click Reset to reload the previous configuration for this screen. 10.11 WPS Device Screen Use this screen when you want to add a wireless station using WPS. To open this screen, click Network > Wireless LAN 2.4G or Wireless LAN 5G > WPS Device. Note: After you click WPS on this screen, you have to press a similar button in the wireless station utility within 2 minutes. To add the second wireless station, you have to press these buttons on both device and the wireless station again after the first 2 minutes. WRE6606 Users Guide 73 Chapter 10 Wireless LAN Figure 52 Network > Wireless LAN 2.4G/5G > WPS Device (Repeater Mode) Figure 53 Network > Wireless LAN 2.4G/5G > WPS Device (AP Mode) The following table describes the labels in this screen. Table 26 Network > Wireless LAN 2.4G/5G > WPS Device LABEL WPS DESCRIPTION Use this button when you use the PBC (Push Button Configuration) method to configure wireless stationss wireless settings. See Section 8.3.1 on page 46. Or input your devices PIN number (AP mode only) Click this to start WPS-aware wireless station scanning and the wireless security information synchronization. Use this button when you use the PIN Configuration method to configure wireless stations wireless settings. See Section 8.3.2 on page 47. Type the same PIN number generated in the wireless stations utility. Then click Go to associate to each other and perform the wireless security information synchronization. 10.12 Scheduling Screen Use this screen (available in AP mode only) to set the times your wireless LAN is turned on and off. Wireless LAN scheduling is disabled by default. The wireless LAN can be scheduled to turn on or off on certain days and at certain times. To open this screen, click Network > Wireless LAN 2.4G or Wireless LAN 5G > Scheduling tab. WRE6606 Users Guide 74 Chapter 10 Wireless LAN Figure 54 Network > Wireless LAN 2.4G/5G > Scheduling The following table describes the labels in this screen. DESCRIPTION Table 27 Network > Wireless LAN 2.4G/5G > Scheduling LABEL Wireless LAN Scheduling Wireless LAN Scheduling Scheduling WLAN Status Select to enable or disable wireless LAN scheduling. Day For the following times (24-Hour Format) Apply Reset Select On or Off to specify whether the Wireless LAN is turned on or off. This field works in conjunction with the Day and For the following times fields. Select Everyday or the specific days to turn the Wireless LAN on or off. If you select Everyday you can not select any specific days. This field works in conjunction with the For the following times field. Select a begin time using the first set of hour and minute (min) drop down boxes and select an end time using the second set of hour and minute (min) drop down boxes. If you have chosen On earlier for the WLAN Status the Wireless LAN will turn on between the two times you enter in these fields. If you have chosen Off earlier for the WLAN Status the Wireless LAN will turn off between the two times you enter in these fields. Click Apply to save your changes back to the WRE6606. Click Reset to reload the previous configuration for this screen. 10.13 Guest WLAN Screen This screen (available in AP mode only) allows you to enable and configure multiple wireless networks and guest wireless network settings on the WRE6606. You can configure up to four SSIDs to enable multiple BSSs (Basic Service Sets) on the WRE6606. This allows you to use one access point to provide several BSSs simultaneously. You can then WRE6606 Users Guide 75 Chapter 10 Wireless LAN assign varying security types and to different SSIDs. Wireless clients can use different SSIDs to associate with the same access point. Figure 55 Network > Wireless LAN 2.4G/5G > Guest WLAN The following table describes the labels in this screen. DESCRIPTION Table 28 Network > Wireless LAN 2.4G/5G > Guest WLAN LABEL Guest WLAN Setup Guest WLAN Network Name
(SSID) Select Enable to activate the guest wireless LAN. Select Disable to turn it off. The SSID (Service Set IDentity) identifies the Service Set with which a wireless client is associated. Enter a descriptive name (up to 32 printable characters found on a typical English language keyboard) for the wireless LAN. Select this check box to hide the SSID in the outgoing beacon frame so a station cannot obtain the SSID through scanning using a site survey tool. Type an IP address for the devices on the Guest WLAN using this as the gateway IP address. Type the subnet mask for the guest wireless LAN. This field displays the first IP address of guest wireless LAN. This field displays the last IP address of guest wireless LAN. Select Static WEP, WPA-PSK, and WPA2-PSK to add security on this wireless network. The wireless clients which want to associate to this network must have the same wireless security settings as this device. After you select to use a security, additional options appears in this screen. See Chapter 10 on page 62 for detailed information on different security modes. Or you can select No Security to allow any client to associate this network without authentication Note: If the WPS function is enabled (default), only No Security and WPA2-PSK are available in this field. WRE6606 Users Guide 76 Hide SSID Guest IP Address Guest Subnet Mask Guest Start IP Guest End IP Security Security Mode Chapter 10 Wireless LAN Table 28 Network > Wireless LAN 2.4G/5G > Guest WLAN LABEL WPA Compatible DESCRIPTION This field appears when you choose WPA2-PSK as the Security Mode. Check this field to allow wireless devices using WPA-PSK security mode to connect to your WRE6606. Pre-Shared Key WPA-PSK/WPA2-PSK uses a simple common password for authentication. Group Key Update Timer Type a pre-shared key from 8 to 63 case-sensitive keyboard characters. The Group Key Update Timer is the rate at which the AP sends a new group key out to all clients. Apply Reset The default is 3600 seconds (60 minutes). Click Apply to save your changes back to the WRE6606. Click Reset to reload the previous configuration for this screen. WRE6606 Users Guide 77 CHAPTER 11 LAN 11.1 Overview This screen allows you to assign the WRE6606 a fixed or dynamic management IP address. The default IP address of the WRE6606 is 192.168.1.2. Alternatively, you can connect to the WRE6606 using the default domain name, http://zyxelsetup. 11.2 LAN IP Screen Use this screen to change the WRE6606s management IP address and configure the DNS server information that the WRE6606 sends to the DHCP clients. Click Network > LAN. Note: If you change the IP address of the WRE6606 in the screen below, you will need to log into the WRE6606 again using the new IP address. Figure 56 Network > LAN > IP The following table describes the labels in this screen. DESCRIPTION Table 29 Network > LAN > IP LABEL LAN TCP/IP Get from DHCP Server Use Defined LAN IP Address Select this to have the WRE6606 get a dynamic IP address from a DHCP server. Click this to enable the manual IP configuration. WRE6606 Users Guide 78 Chapter 11 LAN Table 29 Network > LAN > IP (continued) LABEL IP Address IP Subnet Mask Default Gateway DNS Assignment First DNS Server DESCRIPTION Enter the IP address of your WRE6606 in dotted decimal notation. Enter the subnet mask of your WRE6606 in dotted decimal notation. Enter the gateway of your WRE6606 in dotted decimal notation. Second DNS Server Select From ISP if your ISP or router to which the WRE6606 connects dynamically assigns DNS server information (and the WRE6606's IP address). The field to the right displays the (read-only) DNS server IP address that the ISP assigns. Select User-Defined if you have the IP address of a DNS server. Enter the DNS server's IP address in the field to the right. Select None if you do not want to configure DNS servers. If you do not configure a DNS server, you must know the IP address of a computer in order to access it. Click Apply to save your changes back to the WRE6606. Click Reset to reload the previous configuration for this screen. Apply Reset WRE6606 Users Guide 79 CHAPTER 12 One Connect 12.1 Overview One Connect is a ZyXEL-proprietary feature. It complies with the IEEE 1905.1 standard and allows auto-detection and auto-configuration. If your wireless router supports ZyXEL One Connect, WRE6606 for example, you can download and install the ZyXEL One Connect App in your mobile device to check the connection status, do speed test, turn on or turn off the devices in your network, block or allow a devices access and set up a guest Wi-Fi network from the mobile device. You can even use the App to access the WRE6606s web configurator. The mobile device with the App installed must be connected to the WRE6606 wirelessly. Figure 57 ZyXEL One Connect App 12.1.1 What You Can Do Use the One Connect screen to enable or disable Wi-Fi auto-configuration (Section 12.2 on page 80). 12.2 One Connect Screen Use this screen to enable or disable Wi-Fi auto-configuration on the WRE6606. Click Configuration > Network > OneConnect to open the following screen. Figure 58 Configuration > Network > OneConnect WRE6606 Users Guide 80 Chapter 12 One Connect The following table describes the labels in this screen. Table 30 Configuration > Network > OneConnect LABEL One Connect Auto-configuration DESCRIPTION Select Enable to allow the WRE6606 to automatically update the wireless settings on the APs or wireless repeaters (which also support ZyXEL One Connect) in its network. Apply Reset Select Disable to turn this feature off if you want to have the APs or repeaters in the network use different wireless settings. Click Apply to save your changes back to the WRE6606. Click Reset to reload the previous configuration for this screen. WRE6606 Users Guide 81 CHAPTER 13 Maintenance 13.1 Overview This chapter provides information on the Maintenance screen. 13.2 What You Can Do Use the General screen to set the system and domain names (Section 13.3 on page 82). Use the Password screen to set the password (Section 13.4 on page 83). Use the Time screen to change your WRE6606s time and date (Section 13.5 on page 83). Use the Firmware Upgrade screen to update firmware (Section 13.6 on page 85). Use the Backup Restore screen to backup and restore device configurations (Section 13.7 on page 87). Use the Restart screen to reboot the WRE6606 without turning the power off (Section 13.8 on page 89). Use the System Mode screen to select how you want to use your WRE6606 (Section 13.9 on page 90). 13.3 General Use this screen to set the system and domain names and the timeout period of the management session. Click Maintenance > General. The following screen displays. Figure 59 Maintenance > General WRE6606 Users Guide 82 Chapter 13 Maintenance The following table describes the labels in this menu. Table 31 Maintenance > General LABEL System Name Domain Name Administrator Inactivity Timer DESCRIPTION Enter a descriptive name to identify the WRE6606 in an Ethernet network. This is the domain name of the WRE6606. Type how many minutes a management session can be left idle before the session times out. After it times out you have to log in with your password again. Very long idle timeouts may have security risks. A value of "0" means a management session never times out, no matter how long it has been left idle (not recommended). Click Apply to save your changes back to the WRE6606. Click Reset to reload the previous configuration for this screen. Apply Reset 13.4 System Password Screen Use this screen to set the web configurator password. Click Maintenance > System. The following screen displays. Figure 60 Maintenance > Password The following table describes the labels in this screen. Table 32 Maintenance > System > Password LABEL Old Password DESCRIPTION Type the default password or the existing password you use to access the system in this field. Type your new system password (up to 30 characters). Note that as you type a password, the screen displays an asterisk (*) for each character you type. New Password Retype to Confirm Type the new password again in this field. Apply Reset Click Apply to save your changes back to the WRE6606. Click Reset to reload the previous configuration for this screen. 13.5 Time Screen Use this screen to configure the WRE6606s time based on your local time zone. To change your WRE6606s time and date, click Maintenance > Time. The screen appears as shown. WRE6606 Users Guide 83 Chapter 13 Maintenance Figure 61 Maintenance > Time The following table describes the labels in this screen. Table 33 Maintenance > Time LABEL Current Time and Date Current Time DESCRIPTION This field displays the time of your WRE6606. Current Date Manual New Time
(hh:mm:ss) New Date
(yyyy/mm/dd) Get from Time Server Auto Each time you reload this page, the WRE6606 synchronizes the time with the time server. This field displays the date of your WRE6606. Each time you reload this page, the WRE6606 synchronizes the date with the time server. Select this radio button to enter the time and date manually. If you configure a new time and date, Time Zone and Daylight Saving at the same time, the new time and date you entered has priority and the Time Zone and Daylight Saving settings do not affect it. This field displays the last updated time from the time server or the last time configured manually. When you select Manual, enter the new time in this field and then click Apply. This field displays the last updated date from the time server or the last date configured manually. When you select Manual, enter the new date in this field and then click Apply. Select this radio button to have the WRE6606 get the time and date from the time server you specified below. Select Auto to have the WRE6606 WRE6606 Users Guide 84 Chapter 13 Maintenance Table 33 Maintenance > Time (continued) LABEL User Defined Time Server Address DESCRIPTION Select User Defined Time Server Address and enter the IP address or URL (up to 20 extended ASCII characters in length) of your time server. Check with your ISP/network administrator if you are unsure of this information. Time Zone Setup Time Zone Daylight Savings Start Date End Date Apply Reset Choose the time zone of your location. This will set the time difference between your time zone and Greenwich Mean Time (GMT). Daylight saving is a period from late spring to early fall when many countries set their clocks ahead of normal local time by one hour to give more daytime light in the evening. Select this option if you use Daylight Saving Time. Configure the day and time when Daylight Saving Time starts if you selected Daylight Savings. The at field uses the 24 hour format. Here are a couple of examples:
Daylight Saving Time starts in most parts of the United States on the second Sunday of March. Each time zone in the United States starts using Daylight Saving Time at 2 A.M. local time. So in the United States you would select Second, Sunday, March and select 2 in the at field. Daylight Saving Time starts in the European Union on the last Sunday of March. All of the time zones in the European Union start using Daylight Saving Time at the same moment (1 A.M. GMT or UTC). So in the European Union you would select Last, Sunday, March. The time you select in the at field depends on your time zone. In Germany for instance, you would select 2 because Germany's time zone is one hour ahead of GMT or UTC (GMT+1). Configure the day and time when Daylight Saving Time ends if you selected Daylight Savings. The at field uses the 24 hour format. Here are a couple of examples:
Daylight Saving Time ends in the United States on the first Sunday of November. Each time zone in the United States stops using Daylight Saving Time at 2 A.M. local time. So in the United States you would select First, Sunday, November and select 2 in the at field. Daylight Saving Time ends in the European Union on the last Sunday of October. All of the time zones in the European Union stop using Daylight Saving Time at the same moment (1 A.M. GMT or UTC). So in the European Union you would select Last, Sunday, October. The time you select in the at field depends on your time zone. In Germany for instance, you would select 2 because Germany's time zone is one hour ahead of GMT or UTC (GMT+1). Click Apply to save your changes back to the WRE6606. Click Reset to begin configuring this screen afresh. 13.6 Firmware Upgrade Screen Find firmware at www.zyxel.com in a file that (usually) uses the system model name with a *.bin extension, e.g., WRE6606.bin. The upload process uses HTTP (Hypertext Transfer Protocol) and may take up to two minutes. After a successful upload, the system will reboot. Click Maintenance > Firmware Upgrade. Follow the instructions in this screen to upload firmware to your WRE6606. WRE6606 Users Guide 85 Chapter 13 Maintenance Figure 62 Maintenance > Firmware Upgrade The following table describes the labels in this screen. Table 34 Maintenance > Firmware Upgrade LABEL Firmware Upgrade File Path DESCRIPTION Click Select file to find the .bin file you want to upload. Remember that you must decompress compressed (.zip) files before you can upload them. Click Upload to begin the upload process. This process may take up to two minutes. The following fields display when you click this button. Upload On-line Firmware Upgrade Check for Latest Firmware Now You are currently using firmware version:
The Latest Firmware Version Release Date Release Note Size Do_Firmware_ Upgrade The firmware version consists of the trunk version number, model code, and release number. For example, V1.00(AAAG.5) means V1.00 is the trunk number, AAAG represents WRE6606, and 5 means the fifth release. Compare the release number in the previous field with the release number in this one to see if you have the latest firmware. In this example, V1.00(AAAG.5), the numbers are the same
(5), so the WRE6606 already has the latest firmware. The date the firmware was issued is shown in year-month-date format. The release note shows what has changed (new features, bug fixes, known issues) in this firmware version. Check the Release Note before deciding to use new firmware. This is the size of the firmware in bytes. 15073234 is about 15 MB. Click this button to download and upgrade the new firmware to the WRE6606. Note: Do not turn off the WRE6606 while firmware upload is in progress!
After you see the Firmware Upgrading screen, wait until the upgrade process is complete. WRE6606 Users Guide 86 Chapter 13 Maintenance Figure 63 Firmware Upgrading The WRE6606 automatically restarts in this time causing a temporary network disconnect. In some operating systems, you may see the following icon on your desktop. Figure 64 Network Temporarily Disconnected After the WRE6606 restarts, the Upgrade Accomplished screen appears. Figure 65 Upgrade Accomplished Refresh the web page and log in again and check your new firmware version in the Status screen. 13.7 Backup / Restore Screen Click Maintenance > Backup/Restore. Information related to factory defaults, backup configuration, and restoring configuration appears as shown next. WRE6606 Users Guide 87 Chapter 13 Maintenance Figure 66 Maintenance > Backup/Restore 13.7.1 Backup Configuration Backup configuration allows you to back up (save) the WRE6606s current configuration to a file on your computer. Once your WRE6606 is configured and functioning properly, it is highly recommended that you back up your configuration file before making configuration changes. The backup configuration file will be useful in case you need to return to your previous settings. Click Backup to save the WRE6606s current configuration to your computer. 13.7.2 Restore Configuration Restore configuration allows you to upload a new or previously saved configuration file from your computer to your WRE6606. Table 35 Maintenance Restore Configuration LABEL File Path DESCRIPTION Click Select file to find the file you want to upload. Remember that you must decompress compressed (.ZIP) files before you can upload them. Click Upload to begin the upload process. Upload Note: Do not turn off the WRE6606 while configuration file upload is in progress. After you see a configuration upload successful screen, you must then wait one minute before logging into the WRE6606 again. The WRE6606 automatically restarts in this time causing a temporary network disconnect. In some operating systems, you may see the following icon on your desktop. WRE6606 Users Guide 88 Chapter 13 Maintenance Figure 67 Temporarily Disconnected If you uploaded the default configuration file you may need to change the IP address of your computer to be in the same subnet as that of the default WRE6606 IP address (192.168.1.2). Refer to your operating systems help files for details on how to set up your computers IP address. 13.7.3 Back to Factory Defaults Click the Reset button to clear all user-entered configuration information and return the WRE6606 to its factory defaults. The following warning screen appears. Figure 68 Reset Warning Message You can also press the WPS button (see Section 1.4 on page 12) on the front panel for more than 10 seconds to reset the factory defaults of your WRE6606. Refer to Section 1.4 on page 12 for more information on the resetting the WRE6606. 13.8 Restart Screen System restart allows you to reboot the WRE6606 without turning the power off. Click Maintenance > Restart. The following screen displays. Click Restart to have the WRE6606 reboot. This does not affect the WRE6606's configuration. Figure 69 Maintenance > Restart WRE6606 Users Guide 89 Chapter 13 Maintenance 13.9 System Mode Use this screen to change the operating mode of the WRE6606. For further information on system operating mode, see Section 3.1.1 on page 19. Figure 70 Maintenance > System Mode The following table describes the labels in this menu. Table 36 Maintenance > System Mode LABEL Normal mode DESCRIPTION The default WPS behavior, both 2.4 GHz and 5 GHz bands are supported in up and down broadcasting. Select this option to set the WRE6606 to Range boost mode--the 2.4 GHz band is supported on the Up behavior, while the 5 GHz band is supported on the Down behavior. Select this option to set the WRE6606 to Speed boost mode--the 5 GHz band is supported on the Up behavior, while the 2.4 GHz band is supported on the Down behavior. Click Apply to save your changes back to the WRE6606. Click Reset to reload the previous configuration for this screen. Range boost mode Speed boost mode Apply Reset WRE6606 Users Guide 90 Chapter 13 Maintenance 13.9.1 System WPS Behavior In Repeater mode (see Chapter 3 on page 20), you can select the type of WPS behavior: Normal Mode, Range Boost, or Speed Boost mode. The device enables you to extend the range of your dual-band router to eliminate "dead spots" in your wireless network. You can choose from normal mode, range boost, or speed boost modes for both your 2.4GHz and 5GHz networks. The following terms are used to describe the WPS behavior:
Up: The connection from the WRE6606 to the Router Down: The connection from the WRE6606 to a client Figure 71 Normal Mode with Up and Down Broadcasting Up Router Down Universal Repeater Client Home wireless network: 2.4G SSID = Home2.4G_2.4GEXT; 5G SSID = Home5G_5GEXT. Work wireless network: 2.4G SSID = Work2.4G_2.4GEXT; 5G SSID = Work5G_5GEXT. No profile: There is no currently defined profile. The following section describes the Normal, Range Boost, and Speed Boost mode (WPS) behaviors in a home and work network connection. As connection profiles are established, the WRE6606 maintains a record of the varying profiles and automatically joins the network when in range. Note: The home wireless network is the initial setup environment. The WRE6606 does not have any established network profiles at the time of initial setup. 13.9.1.1 Normal Mode In normal mode, both Down and Up WPS behaviors are supported for both 2.4 GHz and 5 GHz bands. WRE6606 Users Guide 91 Chapter 13 Maintenance Figure 72 Maintenance > System Mode> Normal mode 2.4 GHz / 5 GHz Up 2.4 GHz / 5 GHz Down Universal Repeater Client The following table describes the labels in the previous screen. Table 37 WPS Behavior: Normal Mode WPS BAND 2.4 GHz 5 GHz HOME WIRELESS NETWORK DOWN No profile No profile UP
(Initial Setup)
(Initial Setup) WORK WIRELESS NETWORK DOWN UP Work1 Work1_2.4GEXT No profile Home1 no profile Home1 Home1 No profile
(Initial Setup) No profile No profile Home2 Home2 Home2 No profile Home1_2.4GEXT no profile Home1_2.4GEXT Home1_2.4GEXT No profile
(Initial Setup) No profile No profile Home2_5GEXT Home2_5GEXT Home2_5GEXT No profile Work3 No profile Work3 Work1 No profile Work2_5GEXT No profile Work4 Work2_5GEXT Work4 Work2_2.4GEXT Work3_2.4GEXT Work4_2.4GEXT Work3_2.4GEXT Work1_2.4GEXT Work1_5GEXT Work2_5GEXT Work3_5GEXT Work4_5GEXT Work2_5GEXT Work4_5GEXT 13.9.1.2 Range Boost Mode In range boost mode, the 2.4 GHz band is supported on the Down behavior, while the 5 GHz band is supported on the Up behavior. WRE6606 Users Guide 92 Chapter 13 Maintenance Figure 73 WPS Behavior: Range Boost Mode 2.4 GHz Up 5 GHz Down Universal Repeater Client The following table describes the labels in the previous screen. Table 38 WPS Behavior: Range Boost Mode WPS BAND 2.4 GHz 5 GHz HOME WIRELESS NETWORK DOWN No profile No profile UP
(Initial Setup)
(Initial Setup) Home1 No profile Home1 No profile
(Initial Setup) Home2 Home2 No profile Home1_2.4GEXT Home2_2.4GEXT Home1_2.4GEXT No profile
(Initial Setup) Home2_5GEXT Home2_5GEXT No profile WORK WIRELESS NETWORK DOWN UP Work1 Work3 Work3 Work3 Off Off Off Off No profile Work1_5GEXT Work2 Work2 No profile Work3_5GEXT Work3_5GEXT Work3_5GEXT 13.9.1.3 Speed Boost Mode In speed boost mode, the 5 GHz band is supported on the Down behavior, while the 2.4 GHz band is supported on the Up behavior. Figure 74 WPS Mode: Speed Boost Mode 5 GHz Up 2.4 GHz Down Universal Repeater Client WRE6606 Users Guide 93 Chapter 13 Maintenance The following table describes the labels in the previous screen. Table 39 WPS Mode: Speed Boost Mode HOT SPOT 1 (HOME) WPS BAND UP 2.4 GHz 5 GHz No profile
(Initial Setup) Home1 No profile Home1 No profile
(Initial Setup) Home2 Home2 No profile DOWN No profile
(Initial Setup) Home1_2.4GEXT Home2_2.4GEXT Home1_2.4GEXT No profile
(Initial Setup) Home2_5GEXT Home2_5GEXT No profile HOT SPOT 2 (WORK) UP DOWN No profile Work2_2.4GEXT Work1 No profile Work1 Work2 Work4 Work4 Work3 Work4_2.4GEXT Work4_2.4GEXT Work3_2.4GEXT Off Off Off Off WRE6606 Users Guide 94 CHAPTER 14 Troubleshooting This chapter offers some suggestions to solve problems you might encounter. The potential problems are divided into the following categories. Power, Hardware Connections, and LEDs WRE6606 Access and Login Internet Access Resetting the WRE6606 to Its Factory Defaults Wireless Problems 14.1 Power, Hardware Connections, and LEDs The WRE6606 does not turn on. None of the LEDs turn on. 1 Make sure the WRE6606 is plugged in to an appropriate power source. Make sure the power source is turned on. 2 Disconnect and re-connect the WRE6606. 3 4 Remove the WRE6606 from the outlet. Then connect an electrical device that you know works into the same power outlet. This checks the status of the power outlet. If the problem continues, contact the vendor. One of the LEDs does not behave as expected. 1 Make sure you understand the normal behavior of the LED. See Section 1.3 on page 10. 2 Make sure you understand how the LEDs are enabled or disabled. See Section 1.3 on page 10. 3 4 Check the hardware connections. See the Quick Start Guide. Inspect your cables for damage. Contact the vendor to replace any damaged cables. 5 Disconnect and re-connect the WRE6606. 6 If the problem continues, contact the vendor. WRE6606 Users Guide 95 Chapter 14 Troubleshooting 14.2 WRE6606 Access and Login I forgot the password. 1 2 The default password is 1234. If this does not work, you have to reset the device to its factory defaults. See Section 14.4 on page 98. I cannot see or access the Login screen in the Web Configurator. 1 Make sure you are using the correct address. The default web address (URL) of the WRE6606 is http://zyxelsetup. 2 Check the hardware connections, and make sure the LEDs are behaving as expected. See the Quick Start Guide. 3 Make sure your Internet browser does not block pop-up windows and has JavaScript and Java enabled. 4 5 Reset the device to its factory defaults, and try to access the WRE6606 with the default address. If the problem continues, contact the network administrator or vendor, or try one of the advanced suggestions. Advanced Suggestions If your computer is connected wirelessly, use a computer that is connected to a LAN/ETHERNET port. I can see the Login screen, but I cannot log in to the WRE6606. 1 Make sure you have entered the password correctly. The default password is 1234. 2 This can happen when you fail to log out properly from your last session. Try logging in again after 5 minutes. 3 Disconnect and re-connect the WRE6606. 4 If this does not work, you have to reset the device to its factory defaults. See Section 14.4 on page 98. WRE6606 Users Guide 96 Chapter 14 Troubleshooting 14.3 Internet Access I cannot access the Internet. 1 2 3 Check the hardware connections, and make sure the LEDs are behaving as expected. See the Quick Start Guide. Try to connect directly to the AP. If you can access the Internet, check that the WRE6606 (repeater mode) has associated with the AP by checking the Status screen. See Section 6.4 on page 33. If you are trying to access the Internet wirelessly, make sure the wireless settings in the wireless client are the same as the settings in the AP. 4 Disconnect all the cables from your device, and follow the directions in the Quick Start Guide again. 5 If the problem continues, contact the network administrator or vendor. I cannot access the Internet anymore. I had access to the Internet (with the WRE6606 in repeater mode), but my Internet connection is not available anymore. 1 2 3 4 Check the hardware connections, and make sure the LEDs are behaving as expected. See the Quick Start Guide and Section 1.3 on page 10. Reboot the WRE6606. Try to connect directly to the AP. If you can access the Internet, check that the WRE6606 (repeater mode) has associated with the AP by checking the Status screen. See Section 6.4 on page 33. If the problem continues, contact the network administrator or vendor. The Internet connection is slow or intermittent. 1 2 3 4 There might be a lot of traffic on the network. Look at the LEDs, and check Section 1.3 on page 10. If the WRE6606 is sending or receiving a lot of information, try closing some programs that use the Internet, especially peer-to-peer applications. Check the signal strength. If the signal strength is low, try moving the WRE6606 closer to the AP if possible, and look around to see if there are any devices that might be interfering with the wireless network (for example, microwaves, other wireless networks, and so on). Reboot the WRE6606. If the problem continues, contact the network administrator or vendor, or try one of the advanced suggestions. WRE6606 Users Guide 97 Chapter 14 Troubleshooting Advanced Suggestion Check the settings for QoS. If it is disabled, you might consider activating it. 14.4 Resetting the WRE6606 to Its Factory Defaults If you reset the WRE6606, you lose all of the changes you have made. The WRE6606 re-loads its default settings, and the password resets to 1234. You have to make all of your changes again. You will lose all of your changes when you reset the WRE6606 to its factory defaults. To reset the WRE6606, 1 Make sure the power LED is on. 2 3 Press the WPS button for longer than 10 seconds, the Power LED begins to blink, to set the WRE6606 back to its factory-default configuration. OR Click Maintenance > Backup Restore > Restore and then click Reset. If the WRE6606 restarts automatically, wait for the WRE6606 to finish restarting, and log in to the Web Configurator. The password is 1234. If the WRE6606 does not restart automatically, disconnect and reconnect the WRE6606. Then, follow the directions above again. 14.5 Wireless Problems I cannot access the WRE6606 or ping any computer from the WLAN. 1 Make sure the wireless LAN is enabled on the WRE6606. 2 Make sure the wireless adapter on the wireless station is working properly. 3 Make sure the wireless adapter installed on your computer is IEEE 802.11 compatible and supports the same wireless standard as the WRE6606. 4 Make sure your computer (with a wireless adapter installed) is within the transmission range of the WRE6606. WRE6606 Users Guide 98 Chapter 14 Troubleshooting 5 Check that both the WRE6606 and your wireless station are using the same wireless and wireless security settings, and that both the WRE6606 and the AP are using the same wireless and wireless security settings. 6 Make sure traffic between the WLAN and the LAN is not blocked by the MAC Address List of the WRE6606. See Section 10.7 on page 69. WRE6606 Users Guide 99 APPENDIX A Customer Support In the event of problems that cannot be solved by using this manual, you should contact your vendor. If you cannot contact your vendor, then contact a ZyXEL office for the region in which you bought the device. See http://www.zyxel.com/homepage.shtml and also http://www.zyxel.com/about_zyxel/zyxel_worldwide.shtml for the latest information. Please have the following information ready when you contact an office. Required Information Product model and serial number. Warranty Information. Date that you received your device. Brief description of the problem and the steps you took to solve it. Corporate Headquarters (Worldwide) Taiwan ZyXEL Communications Corporation http://www.zyxel.com Asia China ZyXEL Communications (Shanghai) Corp. ZyXEL Communications (Beijing) Corp. ZyXEL Communications (Tianjin) Corp. http://www.zyxel.cn India ZyXEL Technology India Pvt Ltd http://www.zyxel.in Kazakhstan ZyXEL Kazakhstan http://www.zyxel.kz WRE6606 Users Guide 100 Appendix A Customer Support Korea ZyXEL Korea Corp. http://www.zyxel.kr Malaysia ZyXEL Malaysia Sdn Bhd. http://www.zyxel.com.my Pakistan ZyXEL Pakistan (Pvt.) Ltd. http://www.zyxel.com.pk Philippines ZyXEL Philippines http://www.zyxel.com.ph Singapore ZyXEL Singapore Pte Ltd. http://www.zyxel.com.sg Taiwan ZyXEL Communications Corporation http://www.zyxel.com/tw/zh/
Thailand ZyXEL Thailand Co., Ltd http://www.zyxel.co.th Vietnam ZyXEL Communications Corporation-Vietnam Office http://www.zyxel.com/vn/vi Europe Austria ZyXEL Deutschland GmbH http://www.zyxel.de Belarus ZyXEL BY http://www.zyxel.by WRE6606 Users Guide 101 Appendix A Customer Support Belgium ZyXEL Communications B.V. http://www.zyxel.com/be/nl/
http://www.zyxel.com/be/fr/
Bulgaria ZyXEL http://www.zyxel.com/bg/bg/
Czech Republic ZyXEL Communications Czech s.r.o http://www.zyxel.cz Denmark ZyXEL Communications A/S http://www.zyxel.dk Estonia ZyXEL Estonia http://www.zyxel.com/ee/et/
Finland ZyXEL Communications http://www.zyxel.fi France ZyXEL France http://www.zyxel.fr Germany ZyXEL Deutschland GmbH http://www.zyxel.de Hungary ZyXEL Hungary & SEE http://www.zyxel.hu Italy ZyXEL Communications Italy http://www.zyxel.it/
WRE6606 Users Guide 102 Appendix A Customer Support Latvia ZyXEL Latvia http://www.zyxel.com/lv/lv/homepage.shtml Lithuania ZyXEL Lithuania http://www.zyxel.com/lt/lt/homepage.shtml Netherlands ZyXEL Benelux http://www.zyxel.nl Norway ZyXEL Communications http://www.zyxel.no Poland ZyXEL Communications Poland http://www.zyxel.pl Romania ZyXEL Romania http://www.zyxel.com/ro/ro Russia ZyXEL Russia http://www.zyxel.ru Slovakia ZyXEL Communications Czech s.r.o. organizacna zlozka http://www.zyxel.sk Spain ZyXEL Communications ES Ltd http://www.zyxel.es Sweden ZyXEL Communications http://www.zyxel.se Switzerland Studerus AG WRE6606 Users Guide 103 Appendix A Customer Support http://www.zyxel.ch/
Turkey ZyXEL Turkey A.S. http://www.zyxel.com.tr UK ZyXEL Communications UK Ltd. http://www.zyxel.co.uk Ukraine ZyXEL Ukraine http://www.ua.zyxel.com Latin America Argentina ZyXEL Communication Corporation http://www.zyxel.com/ec/es/
Brazil ZyXEL Communications Brasil Ltda. https://www.zyxel.com/br/pt/
Ecuador ZyXEL Communication Corporation http://www.zyxel.com/ec/es/
Middle East Israel ZyXEL Communication Corporation http://il.zyxel.com/homepage.shtml Middle East ZyXEL Communication Corporation http://www.zyxel.com/me/en/
WRE6606 Users Guide 104 Appendix A Customer Support North America USA ZyXEL Communications, Inc. - North America Headquarters http://www.zyxel.com/us/en/
Oceania Africa Australia ZyXEL Communications Corporation http://www.zyxel.com/au/en/
South Africa Nology (Pty) Ltd. http://www.zyxel.co.za WRE6606 Users Guide 105 APPENDIX B Setting Up Your Computers IP Address Note: Your specific WRE6606 may not support all of the operating systems described in this appendix. See the product specifications for more information about which operating systems are supported. This appendix shows you how to configure the IP settings on your computer in order for it to be able to communicate with the other devices on your network. Windows Vista/XP/2000, Mac OS 9/
OS X, and all versions of UNIX/LINUX include the software components you need to use TCP/IP on your computer. If you manually assign IP information instead of using a dynamic IP, make sure that your networks computers have IP addresses that place them in the same subnet. In this appendix, you can set up an IP address for:
Windows XP/NT/2000 on page 106 Windows Vista on page 110 Windows 7 on page 114 Mac OS X: 10.3 and 10.4 on page 118 Mac OS X: 10.5 and 10.6 on page 121 Linux: Ubuntu 8 (GNOME) on page 124 Linux: openSUSE 10.3 (KDE) on page 128 Windows XP/NT/2000 The following example uses the default Windows XP display theme but can also apply to Windows 2000 and Windows NT. 1 Click Start > Control Panel. WRE6606 Users Guide 106 Appendix B Setting Up Your Computers IP Address 2 In the Control Panel, click the Network Connections icon. 3 Right-click Local Area Connection and then select Properties. 4 On the General tab, select Internet Protocol (TCP/IP) and then click Properties. WRE6606 Users Guide 107 Appendix B Setting Up Your Computers IP Address 5 The Internet Protocol TCP/IP Properties window opens. WRE6606 Users Guide 108 Appendix B Setting Up Your Computers IP Address 6 7 8 Select Obtain an IP address automatically if your network administrator or ISP assigns your IP address dynamically. Select Use the following IP Address and fill in the IP address, Subnet mask, and Default gateway fields if you have a static IP address that was assigned to you by your network administrator or ISP. You may also have to enter a Preferred DNS server and an Alternate DNS server, if that information was provided. Click OK to close the Internet Protocol (TCP/IP) Properties window. Click OK to close the Local Area Connection Properties window. Verifying Settings 1 2 Click Start > All Programs > Accessories > Command Prompt. In the Command Prompt window, type "ipconfig" and then press [ENTER]. You can also go to Start > Control Panel > Network Connections, right-click a network connection, click Status and then click the Support tab to view your IP address and connection information. WRE6606 Users Guide 109 Appendix B Setting Up Your Computers IP Address Windows Vista This section shows screens from Windows Vista Professional. 1 Click Start > Control Panel. 2 In the Control Panel, click the Network and Internet icon. 3 Click the Network and Sharing Center icon. 4 Click Manage network connections. WRE6606 Users Guide 110 Appendix B Setting Up Your Computers IP Address 5 Right-click Local Area Connection and then select Properties. Note: During this procedure, click Continue whenever Windows displays a screen saying that it needs your permission to continue. 6 Select Internet Protocol Version 4 (TCP/IPv4) and then select Properties. WRE6606 Users Guide 111 Appendix B Setting Up Your Computers IP Address 7 The Internet Protocol Version 4 (TCP/IPv4) Properties window opens. WRE6606 Users Guide 112 Appendix B Setting Up Your Computers IP Address 8 Select Obtain an IP address automatically if your network administrator or ISP assigns your IP address dynamically. Select Use the following IP Address and fill in the IP address, Subnet mask, and Default gateway fields if you have a static IP address that was assigned to you by your network administrator or ISP. You may also have to enter a Preferred DNS server and an Alternate DNS server, if that information was provided.Click Advanced. 9 Click OK to close the Internet Protocol (TCP/IP) Properties window. 10 Click OK to close the Local Area Connection Properties window. Verifying Settings 1 2 Click Start > All Programs > Accessories > Command Prompt. In the Command Prompt window, type "ipconfig" and then press [ENTER]. You can also go to Start > Control Panel > Network Connections, right-click a network connection, click Status and then click the Support tab to view your IP address and connection information. WRE6606 Users Guide 113 Appendix B Setting Up Your Computers IP Address Windows 7 This section shows screens from Windows 7 Enterprise. 1 Click Start > Control Panel. 2 In the Control Panel, click View network status and tasks under the Network and Internet category. 3 Click Change adapter settings. 4 Double click Local Area Connection and then select Properties. WRE6606 Users Guide 114 Appendix B Setting Up Your Computers IP Address Note: During this procedure, click Continue whenever Windows displays a screen saying that it needs your permission to continue. 5 Select Internet Protocol Version 4 (TCP/IPv4) and then select Properties. WRE6606 Users Guide 115 Appendix B Setting Up Your Computers IP Address 6 The Internet Protocol Version 4 (TCP/IPv4) Properties window opens. WRE6606 Users Guide 116 Appendix B Setting Up Your Computers IP Address 7 8 9 Select Obtain an IP address automatically if your network administrator or ISP assigns your IP address dynamically. Select Use the following IP Address and fill in the IP address, Subnet mask, and Default gateway fields if you have a static IP address that was assigned to you by your network administrator or ISP. You may also have to enter a Preferred DNS server and an Alternate DNS server, if that information was provided. Click Advanced if you want to configure advanced settings for IP, DNS and WINS. Click OK to close the Internet Protocol (TCP/IP) Properties window. Click OK to close the Local Area Connection Properties window. Verifying Settings 1 2 3 Click Start > All Programs > Accessories > Command Prompt. In the Command Prompt window, type "ipconfig" and then press [ENTER]. The IP settings are displayed as follows. WRE6606 Users Guide 117 Appendix B Setting Up Your Computers IP Address Mac OS X: 10.3 and 10.4 The screens in this section are from Mac OS X 10.4 but can also apply to 10.3. 1 Click Apple > System Preferences. 2 In the System Preferences window, click the Network icon. WRE6606 Users Guide 118 Appendix B Setting Up Your Computers IP Address 3 When the Network preferences pane opens, select Built-in Ethernet from the network connection type list, and then click Configure. 4 For dynamically assigned settings, select Using DHCP from the Configure IPv4 list in the TCP/IP tab. WRE6606 Users Guide 119 Appendix B Setting Up Your Computers IP Address 5 For statically assigned settings, do the following:
From the Configure IPv4 list, select Manually. In the IP Address field, type your IP address. In the Subnet Mask field, type your subnet mask. In the Router field, type the IP address of your device. 6 Click Apply Now and close the window. Verifying Settings Check your TCP/IP properties by clicking Applications > Utilities > Network Utilities, and then selecting the appropriate Network Interface from the Info tab. WRE6606 Users Guide 120 Appendix B Setting Up Your Computers IP Address Figure 75 Mac OS X 10.4: Network Utility Mac OS X: 10.5 and 10.6 The screens in this section are from Mac OS X 10.5 but can also apply to 10.6. 1 Click Apple > System Preferences. 2 In System Preferences, click the Network icon. WRE6606 Users Guide 121 Appendix B Setting Up Your Computers IP Address 3 When the Network preferences pane opens, select Ethernet from the list of available connection types. 4 5 From the Configure list, select Using DHCP for dynamically assigned settings. For statically assigned settings, do the following:
From the Configure list, select Manually. In the IP Address field, enter your IP address. WRE6606 Users Guide 122 Appendix B Setting Up Your Computers IP Address In the Subnet Mask field, enter your subnet mask. In the Router field, enter the IP address of your WRE6606. 6 Click Apply and close the window. Verifying Settings Check your TCP/IP properties by clicking Applications > Utilities > Network Utilities, and then selecting the appropriate Network interface from the Info tab. WRE6606 Users Guide 123 Appendix B Setting Up Your Computers IP Address Figure 76 Mac OS X 10.5: Network Utility Linux: Ubuntu 8 (GNOME) This section shows you how to configure your computers TCP/IP settings in the GNU Object Model Environment (GNOME) using the Ubuntu 8 Linux distribution. The procedure, screens and file locations may vary depending on your specific distribution, release version, and individual configuration. The following screens use the default Ubuntu 8 installation. Note: Make sure you are logged in as the root administrator. Follow the steps below to configure your computer IP address in GNOME:
1 Click System > Administration > Network. 2 When the Network Settings window opens, click Unlock to open the Authenticate window. (By default, the Unlock button is greyed out until clicked.) You cannot make changes to your configuration unless you first enter your admin password. WRE6606 Users Guide 124 Appendix B Setting Up Your Computers IP Address 3 In the Authenticate window, enter your admin account name and password then click the Authenticate button. 4 In the Network Settings window, select the connection that you want to configure, then click Properties. WRE6606 Users Guide 125 Appendix B Setting Up Your Computers IP Address 5 The Properties dialog box opens. In the Configuration list, select Automatic Configuration (DHCP) if you have a dynamic IP address. In the Configuration list, select Static IP address if you have a static IP address. Fill in the IP address, Subnet mask, and Gateway address fields. 6 7 Click OK to save the changes and close the Properties dialog box and return to the Network Settings screen. If you know your DNS server IP address(es), click the DNS tab in the Network Settings window and then enter the DNS server information in the fields provided. WRE6606 Users Guide 126 Appendix B Setting Up Your Computers IP Address 8 Click the Close button to apply the changes. Verifying Settings Check your TCP/IP properties by clicking System > Administration > Network Tools, and then selecting the appropriate Network device from the Devices tab. The Interface Statistics column shows data if your connection is working properly. WRE6606 Users Guide 127 Appendix B Setting Up Your Computers IP Address Figure 77 Ubuntu 8: Network Tools Linux: openSUSE 10.3 (KDE) This section shows you how to configure your computers TCP/IP settings in the K Desktop Environment (KDE) using the openSUSE 10.3 Linux distribution. The procedure, screens and file locations may vary depending on your specific distribution, release version, and individual configuration. The following screens use the default openSUSE 10.3 installation. Note: Make sure you are logged in as the root administrator. Follow the steps below to configure your computer IP address in the KDE:
1 Click K Menu > Computer > Administrator Settings (YaST). WRE6606 Users Guide 128 Appendix B Setting Up Your Computers IP Address 2 When the Run as Root - KDE su dialog opens, enter the admin password and click OK. 3 When the YaST Control Center window opens, select Network Devices and then click the Network Card icon. WRE6606 Users Guide 129 Appendix B Setting Up Your Computers IP Address 4 When the Network Settings window opens, click the Overview tab, select the appropriate connection Name from the list, and then click the Configure button. 5 When the Network Card Setup window opens, click the Address tab WRE6606 Users Guide 130 Appendix B Setting Up Your Computers IP Address Figure 78 openSUSE 10.3: Network Card Setup 6 7 8 Select Dynamic Address (DHCP) if you have a dynamic IP address. Select Statically assigned IP Address if you have a static IP address. Fill in the IP address, Subnet mask, and Hostname fields. Click Next to save the changes and close the Network Card Setup window. If you know your DNS server IP address(es), click the Hostname/DNS tab in Network Settings and then enter the DNS server information in the fields provided. WRE6606 Users Guide 131 Appendix B Setting Up Your Computers IP Address 9 Click Finish to save your settings and close the window. Verifying Settings Click the KNetwork Manager icon on the Task bar to check your TCP/IP properties. From the Options sub-menu, select Show Connection Information. Figure 79 openSUSE 10.3: KNetwork Manager When the Connection Status - KNetwork Manager window opens, click the Statistics tab to see if your connection is working properly. WRE6606 Users Guide 132 Appendix B Setting Up Your Computers IP Address Figure 80 openSUSE: Connection Status - KNetwork Manager WRE6606 Users Guide 133 APPENDIX C Legal Information Copyright Disclaimer Copyright 2016 by ZyXEL Communications Corporation. The contents of this publication may not be reproduced in any part or as a whole, transcribed, stored in a retrieval system, translated into any language, or transmitted in any form or by any means, electronic, mechanical, magnetic, optical, chemical, photocopying, manual, or otherwise, without the prior written permission of ZyXEL Communications Corporation. Published by ZyXEL Communications Corporation. All rights reserved. ZyXEL does not assume any liability arising out of the application or use of any products, or software described herein. Neither does it convey any license under its patent rights nor the patent rights of others. ZyXEL further reserves the right to make changes in any products described herein without notice. This publication is subject to change without notice. Regulatory Notice and Statement UNITED STATES of AMERICA device. The following information applies if you use the product within USA area. FCC EMC Statement The device complies with Part 15 of FCC rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the This product has been tested and complies with the specifications for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This device generates, uses, and can radiate radio frequency energy and, if not installed and used according to the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this device does cause harmful interference to radio or television reception, which is found by turning the device off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna Increase the separation between the devices Connect the equipment to an outlet other than the receivers Consult a dealer or an experienced radio/TV technician for assistance The following information applies if you use the product with RF function within USA area. FCC Radiation Exposure Statement This device complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must be at least 20 cm from the user and must not be co-located or operating in conjunction with any other antenna or transmitter. CANADA The following information applies if you use the product within Canada area Industry Canada ICES statement CAN ICES-3 (B)/NMB-3(B) WRE6606 Users Guide 134 Appendix C Legal Information Industry Canada RSS-GEN & RSS-247 statement This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. This radio transmitter has been approved by Industry Canada to operate with the antenna types listed below with the maximum permissible gain and required antenna impedance for each antenna type indicated. Antenna types not included in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device. If the product with 5G wireless function operating in 5150-5250 MHz and 5725-5850 MHz, the following attention must be paid, The device for operation in the band 5150-5250 MHz is only for indoor use to reduce the potential for harmful interference to co-
channel mobile satellite systems. For devices with detachable antenna(s), the maximum antenna gain permitted for devices in the band 5725-5850 MHz shall be such that the equipment still complies with the e.i.r.p. limits specified for point-to-point and non-point-to-point operation as appropriate;
and The worst-case tilt angle(s) necessary to remain compliant with the e.i.r.p. elevation mask requirement set forth in Section 6.2.2(3) of RSS 247 shall be clearly indicated. If the product with 5G wireless function operating in 5250-5350 MHz and 5470-5725 MHz, the following attention must be paid. For devices with detachable antenna(s), the maximum antenna gain permitted for devices in the bands 5250-5350 MHz and 5470-
5725 MHz shall be such that the equipment still complies with the e.i.r.p. limit. Le prsent appareil est conforme aux CNR dIndustrie Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes: (1) lappareil ne doit pas produire de brouillage, et (2) lutilisateur de lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. Le prsent metteur radio de modle s'il fait partie du matriel de catgorieI) a t approuv par Industrie Canada pour fonctionner avec les types d'antenne numrs ci-dessous et ayant un gain admissible maximal et l'impdance requise pour chaque type d'antenne. Les types d'antenne non inclus dans cette liste, ou dont le gain est suprieur au gain maximal indiqu, sont strictement interdits pour l'exploitation de l'metteur. Lorsque la fonction sans fil 5G fonctionnant en5150-5250 MHz and 5725-5850 MHz est active pour ce produit , il est ncessaire de porter une attention particulire aux choses suivantes Les dispositifs fonctionnant dans la bande 5150-5250 MHz sont rservs uniquement pour une utilisation lintrieur afin de rduire les risques de brouillage prjudiciable aux systmes de satellites mobiles utilisant les mmes canaux;
Pour les dispositifs munis dantennes amovibles, le gain maximal d'antenne permis (pour les dispositifs utilisant la bande de 5 725 5 850 MHz) doit tre conforme la limite de la p.i.r.e. spcifie pour l'exploitation point point et lexploitation non point point, selon le cas;
Les pires angles dinclinaison ncessaires pour rester conforme lexigence de la p.i.r.e. applicable au masque dlvation, et nonce la section 6.2.2 3) du CNR-247, doivent tre clairement indiqus. Lorsque la fonction sans fil 5G fonctionnant en 5250-5350 MHz et 5470-5725 MHz est active pour ce produit , il est ncessaire de porter une attention particulire aux choses suivantes. Lorsque la fonction sans fil 5G fonctionnant en 5250-5350 MHz et 5470-5725 MHz est active pour ce produit , il est ncessaire de porter une attention particulire aux choses suivantes. Pour les dispositifs munis dantennes amovibles, le gain maximal d'antenne permis pour les dispositifs utilisant les bandes de 5 250 5 350 MHz et de 5 470 5 725 MHz doit tre conforme la limite de la p.i.r.e. Industry Canada radiation exposure statement This device complies with IC radiation exposure limits set forth for an uncontrolled environment. This device should be installed and operated with a minimum distance of 20 cm between the radiator and your body. Dclaration dexposition aux radiations:
Cet quipement est conforme aux limites dexposition aux rayonnements IC tablies pour un environnement non contrl. Cet quipement doit tre install et utilis avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps. EUROPEAN UNION The following information applies if you use the product within the European Union. Declaration of Conformity with Regard to EU Directive 1999/5/EC (R&TTE Directive) Compliance information for 2.4GHz and/or 5GHz wireless products relevant to the EU and other Countries following the EU Directive 1999/5/EC (R&TTE) This device is restricted to indoor use only when operating in the 5150 to 5350 MHz frequency range.
(Bulgarian) ZyXEL , 1999/5/C. Espaol
(Spanish) etina
(Czech) Por medio de la presente ZyXEL declara que el equipo cumple con los requisitos esenciales y cualesquiera otras disposiciones aplicables o exigibles de la Directiva 1999/5/CE. ZyXEL tmto prohlauje, e tento zazen je ve shod se zkladnmi poadavky a dalmi pslunmi ustanovenmi smrnice 1999/5/EC. WRE6606 Users Guide 135 Appendix C Legal Information Dansk (Danish) Undertegnede ZyXEL erklrer herved, at flgende udstyr udstyr overholder de vsentlige krav og vrige relevante krav i direktiv 1999/5/EF. Deutsch
(German) Eesti keel
(Estonian)
(Greek) English Franais
(French) Hrvatski
(Croatian) slenska
(Icelandic) Italiano
(Italian) Hiermit erklrt ZyXEL, dass sich das Gert Ausstattung in bereinstimmung mit den grundlegenden Anforderungen und den brigen einschlgigen Bestimmungen der Richtlinie 1999/5/EU befindet. Kesolevaga kinnitab ZyXEL seadme seadmed vastavust direktiivi 1999/5/E phinuetele ja nimetatud direktiivist tulenevatele teistele asjakohastele stetele. ZyXEL 1999/5/C. Hereby, ZyXEL declares that this device is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. Par la prsente ZyXEL dclare que l'appareil quipements est conforme aux exigences essentielles et aux autres dispositions pertinentes de la directive 1999/5/EC. ZyXEL ovime izjavljuje da je radijska oprema tipa u skladu s Direktivom 1999/5/EC. Hr me lsir, ZyXEL v yfir a essi bnaur er samrmi vi grunnkrfur og nnur vieigandi kvi tilskipunar 1999/5/EC. Con la presente ZyXEL dichiara che questo attrezzatura conforme ai requisiti essenziali ed alle altre disposizioni pertinenti stabilite dalla direttiva 1999/5/CE. Latvieu valoda
(Latvian) Ar o ZyXEL deklar, ka iekrtas atbilst Direktvas 1999/5/EK btiskajm prasbm un citiem ar to saisttajiem noteikumiem. Lietuvi kalba
(Lithuanian) iuo ZyXEL deklaruoja, kad is ranga atitinka esminius reikalavimus ir kitas 1999/5/EB Direktyvos nuostatas. Magyar
(Hungarian) Alulrott, ZyXEL nyilatkozom, hogy a berendezs megfelel a vonatkoz alapvet kvetelmnyeknek s az 1999/5/EK irnyelv egyb elrsainak. Malti (Maltese) Hawnhekk, ZyXEL, jiddikjara li dan tagmir jikkonforma mal-tiijiet essenzjali u ma provvedimenti orajn relevanti li hemm fid-Dirrettiva 1999/5/EC. Nederlands
(Dutch) Hierbij verklaart ZyXEL dat het toestel uitrusting in overeenstemming is met de essentile eisen en de andere relevante bepalingen van richtlijn 1999/5/EC. Polski (Polish) Niniejszym ZyXEL owiadcza, e sprzt jest zgodny z zasadniczymi wymogami oraz pozostaymi stosownymi postanowieniami Dyrektywy 1999/5/EC. Portugus
(Portuguese) ZyXEL declara que este equipamento est conforme com os requisitos essenciais e outras disposies da Directiva 1999/5/EC. Romn
(Romanian) Slovenina
(Slovak) Slovenina
(Slovene) Suomi
(Finnish) Svenska
(Swedish) Prin prezenta, ZyXEL declar c acest echipament este n conformitate cu cerinele eseniale i alte prevederi relevante ale Directivei 1999/5/EC. ZyXEL tmto vyhlasuje, e zariadenia spa zkladn poiadavky a vetky prslun ustanovenia Smernice 1999/5/EC. ZyXEL izjavlja, da je ta oprema v skladu z bistvenimi zahtevami in ostalimi relevantnimi doloili direktive 1999/5/EC. ZyXEL vakuuttaa tten ett laitteet tyyppinen laite on direktiivin 1999/5/EY oleellisten vaatimusten ja sit koskevien direktiivin muiden ehtojen mukainen. Hrmed intygar ZyXEL att denna utrustning str I verensstmmelse med de vsentliga egenskapskrav och vriga relevanta bestmmelser som framgr av direktiv 1999/5/EC. Norsk
(Norwegian) Erklrer herved ZyXEL at dette utstyret er I samsvar med de grunnleggende kravene og andre relevante bestemmelser I direktiv 1999/5/EF. National Restrictions This product may be used in all EU countries (and other countries following the EU Directive 1999/5/EC) without any limitation except Ce produit peut tre utilis dans tous les pays de lUE (et dans tous les pays ayant transposs la directive 1999/5/CE) sans aucune Questo prodotto utilizzabile in tutte i paesi EU (ed in tutti gli altri paesi che seguono le direttiva 1999/5/EC) senza nessuna for the countries mentioned below:
limitation, except pour les pays mentionns ci-dessous:
limitazione, eccetto per i paesii menzionati di seguito:
folgen) mit Aunahme der folgenden aufgefhrten Staaten:
Das Produkt kann in allen EU Staaten ohne Einschrnkungen eingesetzt werden (sowie in anderen Staaten die der Richtlinie 1999/5/CE In the majority of the EU and other European countries, the 2.4GHz and 5GHz bands have been made available for the use of wireless local area networks (LANs). Later in this document you will find an overview of countries in which additional restrictions or requirements or both are applicable. The requirements for any country may evolve. ZyXEL recommends that you check with the local authorities for the latest status of their national regulations for both the 2.4GHz and 5GHz wireless LANs. The following countries have restrictions and/or requirements in addition to those given in the table labeled Overview of Regulatory Requirements for Wireless LANs:. Belgium The Belgian Institute for Postal Services and Telecommunications (BIPT) must be notified of any outdoor wireless link having a range exceeding 300 meters. Please check http://www.bipt.be for more details. Draadloze verbindingen voor buitengebruik en met een reikwijdte van meer dan 300 meter dienen aangemeld te worden bij het Belgisch Instituut voor postdiensten en telecommunicatie (BIPT). Zie http://www.bipt.be voor meer gegevens. WRE6606 Users Guide 136 Appendix C Legal Information Les liaisons sans fil pour une utilisation en extrieur dune distance suprieure 300 mtres doivent tre notifies lInstitut Belge des services Postaux et des Tlcommunications (IBPT). Visitez http://www.ibpt.be pour de plus amples dtails. In Denmark, the band 5150 - 5350 MHz is also allowed for outdoor usage. I Danmark m frekvensbndet 5150 - 5350 ogs anvendes udendrs. Denmark Italy This product meets the National Radio Interface and the requirements specified in the National Frequency Allocation Table for Italy. Unless this wireless LAN product is operating within the boundaries of the owner's property, its use requires a general authorization. Please check http://www.sviluppoeconomico.gov.it/ for more details. Questo prodotto conforme alla specifiche di Interfaccia Radio Nazionali e rispetta il Piano Nazionale di ripartizione delle frequenze in Italia. Se non viene installato all 'interno del proprio fondo, l'utilizzo di prodotti Wireless LAN richiede una Autorizzazione Generale. Consultare http://www.sviluppoeconomico.gov.it/ per maggiori dettagli. Latvia The outdoor usage of the 2.4 GHz band requires an authorization from the Electronic Communications Office. Please check http://
2.4 GHz frekvenu joslas izmantoanai rpus telpm nepiecieama atauja no Elektronisko sakaru direkcijas. Vairk informcijas:
www.esd.lv for more details. http://www.esd.lv. Notes:
1. Although Norway, Switzerland and Liechtenstein are not EU member states, the EU Directive 1999/5/EC has also been implemented in those countries. 2. The regulatory limits for maximum output power are specified in EIRP. The EIRP level (in dBm) of a device can be calculated by adding the gain of the antenna used(specified in dBi) to the output power available at the connector (specified in dBm). List of national codes COUNTRY Austria Belgium Bulgaria Croatia Cyprus Czech Republic Denmark Estonia Finland France Germany Greece Hungary Iceland Ireland Italy Latvia Safety Warnings ISO 3166 2 LETTER CODE COUNTRY ISO 3166 2 LETTER CODE AT BE BG HR CY CZ DK EE FI FR DE GR HU IS IE IT LV Liechtenstein Lithuania Luxembourg Malta Netherlands Norway Poland Portugal Romania Serbia Slovakia Slovenia Spain Switzerland Sweden Turkey United Kingdom LI LT LU MT NL NO PL PT RO RS SK SI ES CH SE TR GB Do not use this product near water, for example, in a wet basement or near a swimming pool. Do not expose your device to dampness, dust or corrosive liquids. Do not store things on the device. Do not obstruct the device ventilation slots as insufficient airflow may harm your device. For example, do not place the device in an enclosed space such as a box or on a very soft surface such as a bed or sofa. Do not install, use, or service this device during a thunderstorm. There is a remote risk of electric shock from lightning. Connect ONLY suitable accessories to the device. Do not open the device or unit. Opening or removing covers can expose you to dangerous high voltage points or other risks. ONLY qualified service personnel should service or disassemble this device. Please contact your vendor for further information. Make sure to connect the cables to the correct ports. Place connecting cables carefully so that no one will step on them or stumble over them. Always disconnect all cables from this device before servicing or disassembling. Do not remove the plug and connect it to a power outlet by itself; always attach the plug to the power adaptor first before connecting it to a power outlet. or cord. Do not allow anything to rest on the power adaptor or cord and do NOT place the product where anyone can walk on the power adaptor Please use the provided or designated connection cables/power cables/ adaptors. Connect it to the right supply voltage (for example, 110V AC in North America or 230V AC in Europe). If the power adaptor or cord is damaged, it might cause electrocution. Remove it from the device and the power source, repairing the power adapter or cord is prohibited. Contact your local vendor to order a new one. Do not use the device outside, and make sure all the connections are indoors. There is a remote risk of electric shock from lightning. WRE6606 Users Guide 137 Appendix C Legal Information CAUTION: Risk of explosion if battery is replaced by an incorrect type, dispose of used batteries according to the instruction. Dispose them at the applicable collection point for the recycling of electrical and electronic devices. For detailed information about recycling of this product, please contact your local city office, your household waste disposal service or the store where you purchased the product. The following warning statements apply, where the disconnect device is not incorporated in the device or where the plug on the power supply cord is intended to serve as the disconnect device,
- For permanently connected devices, a readily accessible disconnect device shall be incorporated external to the device;
- For pluggable devices, the socket-outlet shall be installed near the device and shall be easily accessible. Environment Statement ErP (Energy-related Products) ZyXEL products put on the EU market in compliance with the requirement of the European Parliament and the Council published Directive 2009/125/EC establishing a framework for the setting of ecodesign requirements for energy-related products (recast), so called as "ErP Directive (Energy-related Products directive) as well as ecodesign requirement laid down in applicable implementing measures, power consumption has satisfied regulation requirements which are:
Network standby power consumption < 8W, and/or Off mode power consumption < 0.5W, and/or Standby mode power consumption < 0.5W.
(Wireless setting, please refer to "Wireless" chapter for more detail.) European Union - Disposal and Recycling Information The symbol below means that according to local regulations your product and/or its battery shall be disposed of separately from domestic waste. If this product is end of life, take it to a recycling station designated by local authorities. At the time of disposal, the separate collection of your product and/or its battery will help save natural resources and ensure that the environment is sustainable development. Die folgende Symbol bedeutet, dass Ihr Produkt und/oder seine Batterie gem den rtlichen Bestimmungen getrennt vom Hausmll entsorgt werden muss. Wenden Sie sich an eine Recyclingstation, wenn dieses Produkt das Ende seiner Lebensdauer erreicht hat. Zum Zeitpunkt der Entsorgung wird die getrennte Sammlung von Produkt und/oder seiner Batterie dazu beitragen, natrliche Ressourcen zu sparen und die Umwelt und die menschliche Gesundheit zu schtzen. El smbolo de abajo indica que segn las regulaciones locales, su producto y/o su batera debern depositarse como basura separada de la domstica. Cuando este producto alcance el final de su vida til, llvelo a un punto limpio. Cuando llegue el momento de desechar el producto, la recogida por separado ste y/o su batera ayudar a salvar los recursos naturales y a proteger la salud humana y medioambiental. Le symbole ci-dessous signifie que selon les rglementations locales votre produit et/ou sa batterie doivent tre limins sparment des ordures mnagres. Lorsque ce produit atteint sa fin de vie, amenez-le un centre de recyclage. Au moment de la mise au rebut, la collecte spare de votre produit et/ou de sa batterie aidera conomiser les ressources naturelles et protger l'environnement et la sant humaine. Il simbolo sotto significa che secondo i regolamenti locali il vostro prodotto e/o batteria deve essere smaltito separatamente dai rifiuti domestici. Quando questo prodotto raggiunge la fine della vita di servizio portarlo a una stazione di riciclaggio. Al momento dello smaltimento, la raccolta separata del vostro prodotto e/o della sua batteria aiuta a risparmiare risorse naturali e a proteggere l'ambiente e la salute umana. Symbolen innebr att enligt lokal lagstiftning ska produkten och/eller dess batteri kastas separat frn hushllsavfallet. Nr den hr produkten nr slutet av sin livslngd ska du ta den till en tervinningsstation. Vid tiden fr kasseringen bidrar du till en bttre milj och mnsklig hlsa genom att gra dig av med den p ett tervinningsstlle. WRE6606 Users Guide 138 Appendix C Legal Information Environmental Product Declaration WRE6606 Users Guide 139 Appendix C Legal Information 5.25-5.35 5.25-5.35
:
:
- -
- -
( : / 110V AC 230V AC)
:
About the Symbols Various symbols are used in this product to ensure correct usage, to prevent danger to the user and others, and to prevent property damage. The meaning of these symbols are described below. It is important that you read these descriptions thoroughly and fully understand the contents. WRE6606 Users Guide 140 Appendix C Legal Information Explanation of the Symbols SYMBOL EXPLANATION Alternating current (AC):
AC is an electric current in which the flow of electric charge periodically reverses direction. Direct current (DC):
DC if the unidirectional flow or movement of electric charge carriers. Earth; ground:
A wiring terminal intended for connection of a Protective Earthing Conductor. Class II equipment:
The method of protection against electric shock in the case of class II equipment is either double insulation or reinforced insulation. Viewing Certifications Go to http://www.zyxel.com to view this products documentation and certifications. ZyXEL Limited Warranty ZyXEL warrants to the original end user (purchaser) that this product is free from any defects in material or workmanship for a specific period (the Warranty Period) from the date of purchase. The Warranty Period varies by region. Check with your vendor and/or the authorized ZyXEL local distributor for details about the Warranty Period of this product. During the warranty period, and upon proof of purchase, should the product have indications of failure due to faulty workmanship and/or materials, ZyXEL will, at its discretion, repair or replace the defective products or components without charge for either parts or labor, and to whatever extent it shall deem necessary to restore the product or components to proper operating condition. Any replacement will consist of a new or re-manufactured functionally equivalent product of equal or higher value, and will be solely at the discretion of ZyXEL. This warranty shall not apply if the product has been modified, misused, tampered with, damaged by an act of God, or subjected to abnormal working conditions. Note Repair or replacement, as provided under this warranty, is the exclusive remedy of the purchaser. This warranty is in lieu of all other warranties, express or implied, including any implied warranty of merchantability or fitness for a particular use or purpose. ZyXEL shall in no event be held liable for indirect or consequential damages of any kind to the purchaser. To obtain the services of this warranty, contact your vendor. You may also refer to the warranty policy for the region in which you bought the device at http://www.zyxel.com/web/support_warranty_info.php. Registration Register your product online to receive e-mail notices of firmware upgrades and information at www.zyxel.com for global products, or at www.us.zyxel.com for North American products. Open Source Licenses This product contains in part some free software distributed under GPL license terms and/or GPL like licenses. Open source licenses are provided with the firmware package. You can download the latest firmware at www.zyxel.com. To obtain the source code covered under those Licenses, please contact support@zyxel.com.tw to get it. WRE6606 Users Guide 141 Index Index A AP automatic selection 49 configuring 49, 50 connection 48 manual selection 50 AP Mode menu 24, 30 status screen 22, 28, 32, 33 AP mode scheduling 74 setting up 22, 28 B backup configuration 88 C certifications 137 viewing 141 channel 23, 24, 34 configuration backup 88 reset factory defaults 89 restore 88 connection AP 48 contact information 100 copyright 134 CPU usage 24, 29, 34 customer support 100 D Daylight saving 85 disclaimer 134 documentation related 2 duplex setting 24, 35 E encryption 57 key 58 F factory defaults restore 89 file sharing FTP 80 firmware upgrade screen 85 firmware upload 85 file extension using HTTP firmware version 23, 29, 33 G general 82 general wireless LAN screen 59 guide quick start 2 I Internet connection 48 IP Address 79 WRE6606 Users Guide 142 L LAN 78 LAN IP screen 78 LAN setup 78 language 89 link type 24, 34 logout Web Configurator 17 M MAC 69 MAC address 57 MAC address filtering 69 MAC address list 57, 69 managing the device good habits 10 media access control 69 memory usage 24, 29, 34 mode access point 19 normal 91 range boost 92 speed boost 93 universal repeater 19 N navigation panel 24, 30, 35 navigation panel 24, 30, 35 normal mode 91 O operating mode 20 operating mode changing 20 Index normal 91 range boost 92 speed boost 93 other documentation 2 P PIN configuration 46, 47 port speed 24, 35 push button configuration 45, 46 Q quick start guide 2 R range boost mode 92 related documentation 2 reset the device 18 resetting factory default 18 restore configuration 88 RTS/CTS threshold 71 S scheduling 74 wireless LAN 74 security PBC 45, 46 PIN 46, 47 WPS 45 service set identification 66 service set identity. see SSID. speed boost mode 93 SSID 23, 24, 34, 56, 66 subnet mask 79 WRE6606 Users Guide 143 Summary Packet statistics 54 system 82 WPS behavior 91 system mode 90 normal 91 range boost 92 speed boost 93 system password screen 83 T Time setting 83 W warranty 141 note 141 web configurator accessing 13 overview 13 WEP Encryption 61, 64, 65 WEP encryption 63 WEP key 63 wireless channel 98 wireless LAN 98 wireless network 57 basic guidelines 56 encryption 57 security 57 SSID 56 wireless security 57 overview 57 troubleshooting 98 type 57 wireless tutorial 45 wizard setup 37 WPS 72 behavior 91 screen 72 WPS button 12, 18 Index WRE6606 Users Guide 144
| frequency | equipment class | purpose | ||
|---|---|---|---|---|
| 1 | 2016-11-22 | 2412 ~ 2462 | DTS - Digital Transmission System | Original Equipment |
| 2 | 5745 ~ 5825 | NII - Unlicensed National Information Infrastructure TX |
| app s | Applicant Information | |||||
|---|---|---|---|---|---|---|
| 1 2 | Effective |
2016-11-22
|
||||
| 1 2 | Applicant's complete, legal business name |
ZyXEL Communications Corporation
|
||||
| 1 2 | FCC Registration Number (FRN) |
0021059092
|
||||
| 1 2 | Physical Address |
No.2, Industry East Road IX, Science Park
|
||||
| 1 2 |
Hsinchu, N/A
|
|||||
| 1 2 |
Taiwan
|
|||||
| app s | TCB Information | |||||
| 1 2 | TCB Application Email Address |
t******@us.bureauveritas.com
|
||||
| 1 2 | TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
||||
| app s | FCC ID | |||||
| 1 2 | Grantee Code |
I88
|
||||
| 1 2 | Equipment Product Code |
WRE6606
|
||||
| app s | Person at the applicant's address to receive grant or for contact | |||||
| 1 2 | Name |
E******** B****
|
||||
| 1 2 | Title |
Section Manager
|
||||
| 1 2 | Telephone Number |
886 3******** Extension:
|
||||
| 1 2 | Fax Number |
886 3********
|
||||
| 1 2 |
E******@zyxel.com.tw
|
|||||
| app s | Technical Contact | |||||
| n/a | ||||||
| app s | Non Technical Contact | |||||
| n/a | ||||||
| app s | Confidentiality (long or short term) | |||||
| 1 2 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
| 1 2 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
| if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
| app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
| 1 2 | Is this application for software defined/cognitive radio authorization? | No | ||||
| 1 2 | Equipment Class | DTS - Digital Transmission System | ||||
| 1 2 | NII - Unlicensed National Information Infrastructure TX | |||||
| 1 2 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | AC1300 MU-MIMO Dual-Band Wireless Range Extender | ||||
| 1 2 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
| 1 2 | Modular Equipment Type | Does not apply | ||||
| 1 2 | Purpose / Application is for | Original Equipment | ||||
| 1 2 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | Yes | ||||
| 1 2 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
| 1 2 | Grant Comments | Power listed is the maximum combined conducted output power. End-users and responsible parties must be provided with operating and installation instructions to ensure RF exposure compliance. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except the collocation as described in this filing or in accordance with FCC multi-transmitter product guidelines. This device has 20 MHz and 40 MHz bandwidth modes. | ||||
| 1 2 | Power listed is the maximum combined conducted output power. End-users and responsible parties must be provided with operating and installation instructions to ensure RF exposure compliance. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except the collocation as described in this filing or in accordance with FCC multi-transmitter product guidelines. This device has 20 MHz, 40 MHz and 80MHz bandwidth modes. Operations in the 5.15-5.25GHz band are restricted to indoor usage only. | |||||
| 1 2 | Is there an equipment authorization waiver associated with this application? | No | ||||
| 1 2 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
| app s | Test Firm Name and Contact Information | |||||
| 1 2 | Firm Name |
Bureau Veritas CPS (H.K.) Ltd., Taoyuan Branch
|
||||
| 1 2 | Name |
K****** L********
|
||||
| 1 2 | Telephone Number |
+886-******** Extension:
|
||||
| 1 2 | Fax Number |
+886-********
|
||||
| 1 2 |
k******@tw.bureauveritas.com
|
|||||
| Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
| 1 | 1 | 15C | CC MO | 2412.00000000 | 2462.00000000 | 0.8340000 | |||||||||||||||||||||||||||||||||||
| Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
| 2 | 1 | 15E | 38 CC MO | 5180 | 5240 | 0.122 | |||||||||||||||||||||||||||||||||||
| 2 | 2 | 15E | 38 CC MO | 5745 | 5825 | 0.128 | |||||||||||||||||||||||||||||||||||
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC