ZyXEL TOTAL INTERNET ACCESS SOLUTION Omni 128L IDSL Modem Quick Start Guide a | Fecrtp: t INSTRUCTIONS: MANUAL | Feerp: 95 OMNT 1 28L FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
~ -- Connect the euipment into an outlet on a circuir different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help. CAUTION:
To assure continued FCC compliance:
(1) Any changes or modifications not expressly approved by the grantee of this device could void the user's authority to operate the euipment. FCC Label Compliance Statement:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
, Omni 128L Quick Start Guide Create a Dial-up Connection Now you only have one step away to access Internet. Follow the instructions below to create a new Dial-up Connection. Step 1. Click on My Computer of your desktop, select Dial-up Network, then click on Add New Dial-up Connection. Step 2. Give a name to this Dial-up Connection; for example, Omni 128L IDSL modem. Then select your Omni 128L as the device to connect to Internet, then click Next. PAC Cemeeccssie Omni 128L Quick Start Guide Step 3. Enter the default phone number 912, then click Next. Rye. (aly Step 4. Click Finish. From now on, you can access Internet by your new IDSL modem. Omni 128L Quick Start Guide Table of Contents 1. Installation I-]
Front Panel Description 1-]
Back Panel Description and Connections 1-3 Power On and Self Diagnostics 1-4 2. Install Windows 95/98/NT Driver (INF file) 2-J Customer Support Omni 128L Quick Start Guide 1. Installation Thank you for choosing the ZyXEL Omni 128L IDSL modem. This section is designed to guide you through a quick, easy installation of your new Omni 128L. The following graphics display the Omni 128L front and rear panels. All installation steps below apply to the Omni 128L. Front Panel Description 1-1 Front Panel LEDs Function Active Description Power LED When the power is turned ON. B1 Channel On Blinking When the link with the local {SDN switch is active. When attempting to make a connection. On When the 64K link is established. B2 Channel On When the 128K link is established. Data Terminal | On When the DTE or computer connected to the DTE Ready port signals that it is ready for communication by establishing an RS-232 link. DSR Data Set On When the modem is ready for communication with the Ready DTE. RTS Request To Send | On When the DTE has data to be sent to the remote modem. The RTS signal is used in Hardware Handshaking. CTS Clear To Send On When the modem is ready to receive data from the remote |
modem. The CTS signal is used in Hardware Handshaking. TX Transmit Data | Blinking | When the DTE/Computer transmits data to the DTE port. RX Receive Data On When the DTE/Computer receives data from the DTE port. 1-2 Omni 128L Quick Start Guide Back Panel Description and Connections Power ON/OFF Power IDSL Switch Input = ~DTE eeeereeds wawehone power Power Wall IDSL Jack Outlet Adapter Computer Back Panel Switch and Connectors ON/OFF | Turn the Omni 128L on or off using this switch. Input terminal for power adapter. Serial port DB-25 female connector for connection to the serial port of a DTE device such as a computer. IDSL RJ-45 terminal jack; connects to an IDSL interface. Power On and Self Diagnostics Once you have completed all of the installation steps above, flip the On/Off switch to the ON
(up) position.The unit starts a self-test sequence, when you should see a series of LEDs blinking (LED, 64K, 128K). After this cycle is complete, the PWR light should stay on. If the test routine fails, the LNK LED flashes. If you have a communication program loaded and active (connected to the same serial port as the Omni 128L), you should see the DTR LED ON after the self-test. 1-4 Omni 128L Quick Start Guide Customer Support ZyXEL IDSL Modem If you have any questions about your ZyXEL product or desire customer assistance, contact ZyXEL in one of the following ways. Contact ZyXEL E-MAIL ~ Support Telephone Regular Mail ps ee Worldwide FTP Site
+886-3-578-3942 www.zyxel. com www. europe. zyxel.com North America ZyXEL Communications Corp., 6 Innovation Road Il, Science-Based Industrial Park, HsinChu, Taiwan. ZyXEL Communications inc., 1650 Miraloma Avenue, Placentia, CA 92870, USA, ZyXEL Communications A/S, Columbusvej 5, 2860 Soeborg, Denmark. ZyXEL Communications Services GmbH. Thaliastrasse 125a/2/2/4 A-1160 Vienna, Austria
+886-3-578-2439
+1-714-632-0882 800-255-4101
+1-714-632-0858 Scandinavia +45-3955-0700 support@zyxel.dk sales@zyxel.dk
+45-3955-0707
+43-1-4948677-0
+43-1-4948678 I. xel ZyXEL Deutschland Germany supponl@zyxel.de 49-2405-6909-0 | Mwwzvxel.de GmbH. _Sales@zyxel.de 49-2405-6909-99 Adenauerstr. 20/A4 D-52146 Wuerselen Germany.