FCC ID: I88B620 Mini-PCI 11M Wireless Lan Card

ZyAIR B-620 Mini-PCI 11M Wireless LAN Card User's Guide Version 1.0 May 2003 ZyAIR B-620 Users Guide Copyright Copyright 2003 by ZyXEL Communications Corporation The contents of this publication may not be reproduced in any part or as a whole, transcribed, stored in a retrieval system, translated into any language, or transmitted in any form or by any means, electronic, mechanical, magnetic, optical, chemical, photocopying, manual, or otherwise, without the prior written permission of ZyXEL Communications Corporation. Published by ZyXEL Communications Corporation. All rights reserved. Disclaimer ZyXEL does not assume any liability arising out of the application or use of any products, or software described herein. Neither does it convey any license under its patent rights nor the patents' rights of others. ZyXEL further reserves the right to make changes in any products described herein without notice. This publication is subject to change without notice. Trademarks Trademarks mentioned in this publication are used for identification purposes only and may be properties of their respective owners. ii Copyright ZyAIR B-620 Users Guide ZyXEL Limited Warranty ZyXEL warrants to the original end user (purchaser) that this product is free from any defects in materials or workmanship for a period of up to one (1) year from the date of purchase. During the warranty period and upon proof of purchase, should the product have indications of failure due to faulty workmanship and/or materials, ZyXEL will, at its discretion, repair or replace the defective products or components without charge for either parts or labor and to whatever extent it shall deem necessary to restore the product or components to proper operating condition. Any replacement will consist of a new or re-manufactured functionally equivalent product of equal value, and will be solely at the discretion of ZyXEL. This warranty shall not apply if the product is modified, misused, tampered with, damaged by an act of God, or subjected to abnormal working conditions. NOTE Repair or replacement, as provided under this warranty, is the exclusive remedy of the purchaser. This warranty is in lieu of all other warranties, express or implied, including any implied warranty of merchantability or fitness for a particular use or purpose. ZyXEL shall in no event be held liable for indirect or consequential damages of any kind of character to the purchaser. To obtain the services of this warranty, contact ZyXEL's Service Center for your Return Material Authorization (RMA) number. Products must be returned Postage Prepaid. It is recommended that the unit be insured when shipped. Any returned products without proof of purchase or those with an out-dated warranty will be repaired or replaced (at the discretion of ZyXEL) and the customer will be billed for parts and labor. All repaired or replaced products will be shipped by ZyXEL to the corresponding return address, Postage Paid. This warranty gives you specific legal rights, and you may also have other rights that vary from country to country. Online Registration Register online at www.zyxel.com.for free future product updates and information. ZyXEL Limited Warranty iii ZyAIR B-620 Users Guide Information for Canadian Users The Industry Canada label identifies certified equipment. This certification means that the equipment meets certain telecommunications network protective operation and safety requirements. The Industry Canada does not guarantee that the equipment will operate to a user's satisfaction. Before installing this equipment, users should ensure that it is permissible to be connected to the facilities of the local telecommunications company. The equipment must also be installed using an acceptable method of connection. In some cases, the company's inside wiring associated with a single line individual service may be extended by means of a certified connector assembly. The customer should be aware that compliance with the above conditions may not prevent degradation of service in some situations. Repairs to certified equipment should be made by an authorized Canadian maintenance facility designated by the supplier. Any repairs or alterations made by the user to this equipment, or equipment malfunctions, may give the telecommunications company cause to request the user to disconnect the equipment. For their own protection, users should ensure that the electrical ground connections of the power utility, telephone lines, and internal metallic water pipe system, if present, are connected together. This precaution may be particularly important in rural areas. Caution Users should not attempt to make such connections themselves, but should contact the appropriate electrical inspection authority, or electrician, as appropriate. Note This digital apparatus does not exceed the Class A limits for radio noise emissions from digital apparatus set out in the radio interference regulations of Industry. iv Information for Canadian Users ZyAIR B-620 Users Guide Federal Communications Commission

(FCC) Interference Statement The Wireless LAN Adapter compliance with Part 15 of FCC rules. Operation is subject to the following two conditions:

This device may not cause harmful interference. This device must accept any interference received, including interference that may cause undesired operations. This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. If this equipment does cause harmful interference to radio/television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

1. Reorient or relocate the receiving antenna. 2. 3. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. 4. Consult the dealer or an experienced radio/TV technician for help. Notice 1 Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Caution 1. To comply with FCC RF exposure compliance requirements, a separation distance of at least 20 cm Increase the separation between the equipment and the receiver. must be maintained between the antenna of this device and all persons. 2. This Transmitter must not be co-located or operating in conjunction with any other antenna or transmitter Additional Information to OEM Integrators The end user should NOT be provided any instructions on how to remove or install the device. End Product Labeling This transmitter module is authorized only for use in devices where the antenna may be installed such that 20 cm may be maintained between the antenna and users (for example access points, routers, wireless FCC Statement v ZyAIR B-620 Users Guide ASDL modems, and similar equipment). The final end product must be labeled in a visible area with the following: Contains TX FCC ID: I88B620 IMPORTANT NOTE 1. In the event that these conditions can not be met (for example certain laptop configurations or co-

location with another transmitter), then the FCC authorization is no longer considered valid and the FCC ID can not be used on the final product. In these circumstances, the OEM integrator will be responsible for re-evaluating the end product (including the transmitter) and obtaining a separate FCC authorization. 2. To comply with FCC RF exposure compliance requirements, the antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-

located or operating in conjunction with any other antenna or transmitter."

Certifications Refer to the product page at www.zyxel.com. vi Information for Canadian Users ZyAIR B-620 Users Guide Customer Support When contacting your Customer Support Representative, please have the following information ready:

Product model and serial number.

Warranty Information.

Date you received your product.

Brief description of the problem and the steps you took to solve it. E-MAIL SUPPORT/SALES TELEPHONE/FAX WEB SITE/ FTP SITE REGULAR MAIL ZyXEL Communications Corp., 6 Innovation Road II, Science-Based Industrial Park, Hsinchu 300, Taiwan ZyXEL Communications Inc., 1650 Miraloma Avenue, Placentia, CA 92870, U.S.A. ZyXEL Communications A/S, Columbusvej 5, 2860 Soeborg, Denmark ZyXEL Deutschland GmbH. Adenauerstr. 20/A2 D-52146 Wuerselen, Germany METHOD LOCATION WORLDWIDE support@zyxel.com.tw

+886-3-578-3942 www.zyxel.com www.europe.zyxel.com sales@zyxel.com.tw

+886-3-578-2439 ftp.europe.zyxel.com NORTH AMERICA support@zyxel.com

+1-714-632-0882 800-255-4101 www.zyxel.com SCANDINAVIA sales@zyxel.com

+1-714-632-0858 ftp.zyxel.com support@zyxel.dk

+45-3955-0700 www.zyxel.dk sales@zyxel.dk

+45-3955-0707 ftp.zyxel.dk GERMANY support@zyxel.de

+49-2405-6909-0 www.zyxel.de sales@zyxel.de

+49-2405-6909-99 Customer Support vii ZyAIR B-620 Users Guide Table of Contents 3.2.1 3.1 3.2 1.1 1.2 1.3 1.3.1 1.3.2 Copyright.......................................................................................................................................................ii ZyXEL Limited Warranty ..........................................................................................................................iii Information for Canadian Users.................................................................................................................iv Federal Communications Commission (FCC) Interference Statement....................................................v Customer Support.......................................................................................................................................vii List of Figures...............................................................................................................................................xi List of Tables ...............................................................................................................................................xii Preface.........................................................................................................................................................xiii Chapter 1 Wireless Network Basics .........................................................................................................1-1 Introduction..................................................................................................................................1-1 Benefits of a Wireless LAN .........................................................................................................1-1 Applications .................................................................................................................................1-1 Ad-hoc..................................................................................................................................1-1 Infrastructure........................................................................................................................1-2 Chapter 2 Disable Windows XP Wireless LAN Configuration Tool.....................................................2-1 Chapter 3 Using the ZyAIR Utility...........................................................................................................3-1 Accessing the ZyAIR Utility........................................................................................................3-1 Viewing Current Configuration ...................................................................................................3-1 Common Screen Command Buttons ....................................................................................3-3 3.3 The About Screen.........................................................................................................................3-3 3.4 Wireless LAN Parameters............................................................................................................3-4 SSID.....................................................................................................................................3-5 Channel ................................................................................................................................3-5 Transmission Rate (Tx Rate)................................................................................................3-5 3.5 Wireless Network Type................................................................................................................3-5 Ad-Hoc (IBSS).....................................................................................................................3-5 Infrastructure........................................................................................................................3-6 Roaming.......................................................................................................................................3-7 The Site Survey Screen ................................................................................................................3-8 Connecting to a Network....................................................................................................3-10 Configuring the ZyAIR Wireless Parameters.............................................................................3-10 Network Configuration Profile Setting ......................................................................................3-12 Resetting to Factory Default Values ..................................................................................3-12 Saving the Current Setting to a Profile...............................................................................3-12 Using a Pre-configured Profile...........................................................................................3-13 Deleting a Profile ...............................................................................................................3-13 Chapter 4 Wireless LAN Security ............................................................................................................4-1 Introduction..................................................................................................................................4-1 Data Encryption with WEP..........................................................................................................4-1 3.9.1 3.9.2 3.9.3 3.9.4 3.4.1 3.4.2 3.4.3 3.5.1 3.5.2 3.8 3.9 3.6 3.7 4.1 4.2 3.7.1 Table of Contents ix ZyAIR B-620 Users Guide 5.2 5.1 4.2.1 5.1.1 5.1.2 5.1.3 Configuring the WEP Encryption on the ZyAIR.................................................................4-1 Chapter 5 Advanced Configuration.........................................................................................................5-1 Overview......................................................................................................................................5-1 Threshold Control ................................................................................................................5-1 Authentication Mode ...........................................................................................................5-2 Preamble Type .....................................................................................................................5-2 The Advanced Screen ..................................................................................................................5-2 Chapter 6 Removing and Upgrading the ZyAIR Utility ........................................................................6-1 Removing the ZyAIR Utility .......................................................................................................6-1 Upgrading the ZyAIR Utility.......................................................................................................6-1 Chapter 7 Troubleshooting.......................................................................................................................7-1 Problems Starting the ZyAIR Utility Program.............................................................................7-1 Problems Communicating With Other Computers ......................................................................7-1 Problem with the Link Status.......................................................................................................7-2 Index ............................................................................................................................................................. A 7.1 7.2 7.3 6.1 6.2 x Table of Contents ZyAIR B-620 Users Guide List of Figures Figure 1-1 Ad-hoc Application Example 1 ..................................................................................................1-2 Figure 1-2 Ad-hoc Application Example 2 ..................................................................................................1-2 Figure 1-3 Infrastructure Application Example............................................................................................1-3 Figure 2-1 Windows XP: System Tray Icon.................................................................................................2-1 Figure 2-2 Windows XP: Wireless Network Connection Status ..................................................................2-2 Figure 2-3 Windows XP: Connect to Wireless Network..............................................................................2-2 Figure 2-4 Windows XP: Wireless Network Connection Properties............................................................2-3 Figure 3-1 ZyAIR Utility: System Tray Icon...............................................................................................3-1 Figure 3-2 ZyAIR Utility: Link Info............................................................................................................3-2 Figure 3-3 ZyAIR Utility: About .................................................................................................................3-4 Figure 3-4 Ad-hoc Network Example ..........................................................................................................3-6 Figure 3-5 BSS Example..............................................................................................................................3-6 Figure 3-6 Infrastructure Network Example ................................................................................................3-7 Figure 3-7 Roaming Example ......................................................................................................................3-8 Figure 3-8 ZyAIR Utility: Site Survey.........................................................................................................3-9 Figure 3-9 Site Survey Warning.................................................................................................................3-10 Figure 3-10 ZyAIR Utility: Configuration.................................................................................................3-11 Figure 4-1 ZyAIR Utility: WEP Encryption ................................................................................................4-2 Figure 5-1 RTS Threshold............................................................................................................................5-1 Figure 5-2 ZyAIR Utility: Advanced ...........................................................................................................5-3 List of Figures xi ZyAIR B-620 Users Guide List of Tables Table 3-1 ZyAIR Utility: System Tray Icon ................................................................................................3-1 Table 3-2 ZyAIR Utility: Link Info .............................................................................................................3-2 Table 3-3 Common Screen Command Buttons............................................................................................3-3 Table 3-4 ZyAIR Utility: About...................................................................................................................3-4 Table 3-5 ZyAIR Utility: Site Survey..........................................................................................................3-9 Table 3-6 Color Indicator for Link Quality/Link Strength.........................................................................3-10 Table 3-7 ZyAIR Utility: Configuration .................................................................................................... 3-11 Table 4-1 ZyAIR Utility: WEP Encryption..................................................................................................4-2 Table 5-1 ZyAIR Utility: Advanced ............................................................................................................5-3 Table 7-1 Troubleshooting Starting ZyAIR Utility Program .......................................................................7-1 Table 7-2 Troubleshooting Communication Problems ................................................................................7-1 Table 7-3 Troubleshooting Link Quality......................................................................................................7-2 xii List of Tables ZyAIR B-620 Users Guide Preface Congratulations on the purchase of your new ZyAIR!

About This User's Guide A practical and comprehensive tool, this manual provides information about the ZyAIR Wireless LAN Utility. Familiarize yourself with the Syntax Conventions listed for better and faster understanding. The ZyAIR Wireless LAN Utility is common to ZyAIR B-x20 Wireless LAN Adapter series, thus the model name shown in the screens may vary from what you actually purchased. Related Documentation

Support Disk Refer to the included CD for support documents and device drivers.

Quick Installation Guide Our Quick Installation Guide is designed to help you get your ZyAIR up and running right away. It contains a detailed easy-to-follow connection diagram and information on installing your ZyAIR.

ZyXEL Glossary and Web Site Please refer to www.zyxel.com for an online glossary of networking terms and additional support documentation. Syntax Conventions Type or Enter means for you to type one or more characters. "Select" or "Choose" means for you to use one of the predefined choices. Window and command choices are in Bold Times New Roman font. Predefined field choices are in Bold Arial font. The ZyAIR B-620 Mini-PCI 11M Wireless LAN Card is referred to as the ZyAIR in this guide. The ZyAIR Wireless LAN Utility may be referred to as the ZyAIR Utility in this guide. Preface xiii ZyAIR B-620 Users Guide Chapter 1 Wireless Network Basics This chapter gives you an overview of what a wireless network is, its advantages and applications. Introduction 1.1 A wireless LAN (WLAN) provides a flexible data communication system that you can use to access various services (navigating the Internet, email, printer services, etc.) on the wired network without additional expensive network cabling infrastructure. In effect, a wireless LAN environment provides you the freedom to stay connected to the wired network while moving in the coverage area. 1.2 Benefits of a Wireless LAN

Access to network services in areas otherwise hard or expensive to wire, such as historical buildings, buildings with asbestos materials and classrooms.

Doctors and nurses can access a complete patients profile on a handheld or notebook computer upon entering a patients room.

It allows flexible workgroups a lower total cost of ownership for networks that are frequently reconfigured.

Conference room users can access the network as they move from meeting to meeting- accessing up-to-date information that facilitates the ability to communicate decisions on the fly.

It provides campus-wide networking coverage, allowing enterprises the roaming capability to set up easy-to-use wireless networks that transparently covers an entire campus. 1.3 Applications Unlike wired networks, you can set up wireless networks in two different modes: infrastructure and ad-hoc. Set up your wireless network depending on your network needs. The following sections describe each network mode. 1.3.1 Ad-hoc An ad-hoc network consists of two or more computers communicating with one another through the wireless network. No access points (APs) or existing wired networks are needed. An access point acts as a bridge between the wireless and wired networks Wireless Network Basics 1-1 ZyAIR B-620 Users Guide Figure 1-1 Ad-hoc Application Example 1 Figure 1-2 Ad-hoc Application Example 2 1.3.2 Infrastructure When wireless clients wish to access and share resources on the wired network, they should use infrastructure mode. Wireless clients may move from one coverage area to another seamlessly without network interruption. This is called roaming. The figure below depicts an infrastructure network example 1-2 Wireless Network Basics ZyAIR B-620 Users Guide Figure 1-3 Infrastructure Application Example 1-3 Wireless Network Basics ZyAIR B-620 Users Guide Chapter 2 Disable Windows XP Wireless LAN Configuration Tool Windows XP includes a configuration tool for wireless devices. DO NOT use the Windows XP configuration tool and the ZyAIR Utility at the same time. Always use the ZyAIR Utility to configure the ZyAIR. Follow the steps below to disable the configuration tool in Windows XP after you install the ZyAIR Utility. Step 1. Double-click on the network icon for wireless connection in the system tray. If the icon is not present, proceed to Step 2. Otherwise skip to Step 5. Figure 2-1 Windows XP: System Tray Icon Step 2. If the icon for the wireless network connection is not in the system tray, click Start, Control Panel and double-click on Network Connections. Disable Windows XP Wireless LAN 2-1 ZyAIR B-620 Users Guide Step 3. Double-click on the icon for wireless network connection to display a status window as shown next. Figure 2-2 Windows XP: Wireless Network Connection Status Step 4. Click Properties and click the Wireless Networks tab. Then skip to Step 6. Step 5. When a Connect to Wireless Network window displays, click Advanced. Figure 2-3 Windows XP: Connect to Wireless Network 2-2 Disable Windows XP Wireless LAN Step 6. ZyAIR B-620 Users Guide In the Wireless Network Connection Properties window, make sure the Use Windows to configure my wireless network settings check box is not selected. Click OK. Figure 2-4 Windows XP: Wireless Network Connection Properties Disable Windows XP Wireless LAN 2-3 ZyAIR B-620 Users Guide Chapter 3 Using the ZyAIR Utility This chapter shows you basic ZyAIR wireless LAN configuration using the ZyAIR Utility. Install the ZyAIR before you proceed. Refer to the Quick Installation Guide. For Windows XP users: disable the Windows XP wireless configuration tool first before you proceed. Refer to Chapter 2. Screen shots for Windows XP are shown unless otherwise specified. 3.1 Accessing the ZyAIR Utility Follow the steps below to access the ZyAIR Utility After you installed the ZyAIR Utility, an icon for the ZyAIR Utility appears in the system tray. When the ZyAIR Utility system tray icon displays, the ZyAIR is installed properly. Figure 3-1 ZyAIR Utility: System Tray Icon The color of the ZyAIR Utility system tray icon indicates the status of the ZyAIR. Refer to the following table for details. Table 3-1 ZyAIR Utility: System Tray Icon COLOR DESCRIPTION Red Blue The ZyAIR is working properly but is not connected to any AP or wireless station. The ZyAIR is connected to a wireless network. Double click on the ZyAIR Wireless LAN Utility icon in the system tray to open the ZyAIR Utility. 3.2 Viewing Current Configuration When the ZyAIR Utility starts, the Link Info screen displays, showing the current configuration of your ZyAIR. The model name shown in the screens may vary depending on the model you are using. Using the ZyAIR Utility 3-1 ZyAIR B-620 Users Guide Figure 3-2 ZyAIR Utility: Link Info The following table describes the fields in this screen. LABEL Device Re-Connect Table 3-2 ZyAIR Utility: Link Info DESCRIPTION Select an available wireless card from the drop-down list menu if you have more than one wireless cards in your computer. Click Re-Connect to re-establish connection to the wireless device whose SSID is shown in the Current Service Set Identifier field. Current Channel This field displays the radio channel the ZyAIR is currently using. Current Transfer Rate This field displays the current transmission rate of the ZyAIR in megabits per second. 3-2 Using the ZyAIR Utility ZyAIR B-620 Users Guide LABEL Current Service Set Identifier Tx/Rx Frame Table 3-2 ZyAIR Utility: Link Info DESCRIPTION This field displays the name of the wireless device to which the ZyAIR is associated. Transmitted This field displays the number of data frames transmitted. Received This field displays the number of data frames received. Link Quality Link Strength Percent/dBm The status bar and the percentage number show the quality of the signal. The status bar and the percentage number or a number in dBm show the strength of the signal. Click this button to display either percentages in the Link Quality and Link Strength fields or a number in dBm in the Link Strength field. 3.2.1 Common Screen Command Buttons The following table describes common command buttons on all ZyAIR Utility screens. Table 3-3 Common Screen Command Buttons BUTTON OK Cancel Help DESCRIPTION Click OK to save all changes and close the ZyAIR Utility. Click Cancel to discard changes and close the ZyAIR Utility. Click Help to display the on-line help window. 3.3 The About Screen The About screen displays related version numbers of the ZyAIR. Using the ZyAIR Utility 3-3 ZyAIR B-620 Users Guide Figure 3-3 ZyAIR Utility: About The following table describes the read-only fields in this screen. FIELD Driver Version Utility Version Firmware Version Table 3-4 ZyAIR Utility: About DESCRIPTION This field displays the version number of the ZyAIR wireless card driver. This field displays the version number of the ZyAIR Utility. This field displays the version of the firmware on which the driver and the utility are based. 3.4 Wireless LAN Parameters This section describes each wireless LAN parameter. 3-4 Using the ZyAIR Utility ZyAIR B-620 Users Guide 3.4.1 SSID The SSID (Service Set Identity) is a unique name shared among all wireless devices in a wireless network. Wireless devices must have the same SSID to communicate with each other. 3.4.2 Channel A range of radio frequencies used by IEEE 802.11b wireless devices is called a channel. 3.4.3 Transmission Rate (Tx Rate) ZyAIR provides various transmission (data) rate options for you to select. Options include Fully Auto, 1 M bit/sec, 2 M bit/sec, 5.5M bit/sec and 11M bit/sec. In most networking scenarios, the factory default Fully Auto setting proves the most efficient. This setting allows your ZyAIR to operate at the maximum transmission (data) rate. When the communication quality drops below a certain level, the ZyAIR automatically switches to a lower transmission (data) rate. Transmission at lower data speeds is usually more reliable. However, when the communication quality improves again, the ZyAIR gradually increases the transmission (data) rate again until it reaches the highest available transmission rate. If you wish to balance speed versus reliability, you can select any of the above options 11M bit/sec or 5.5M bit/sec is used in a networking environment where you are certain that all wireless devices can communicate at the highest transmission (data) rate. 1M bit/sec or 2M bit/sec are used often in networking environments where the range of the wireless connection is more important than speed. 3.5 Wireless Network Type Wireless LAN works in either of the two modes: ad-hoc and infrastructure. To connect to a wired network within a coverage area using Access Points (APs), set the ZyAIR operation mode to Infrastructure(BSS). An AP acts as a bridge between the wireless stations and the wired network. In case you do not wish to connect to a wired network, but prefer to set up a small independent wireless workgroup without an AP, use the Ad-hoc (IBSS) (Independent Basic Service Set) mode. 3.5.1 Ad-Hoc (IBSS) Ad-hoc mode does not require an AP or a wired network. Two or more wireless clients communicate directly to each other. An ad-hoc network may sometimes be referred to as an Independent Basic Service Set (IBSS). Using the ZyAIR Utility 3-5 ZyAIR B-620 Users Guide Figure 3-4 Ad-hoc Network Example To set up an ad-hoc network, configure all wireless clients in ad-hoc network type and use the same SSID and channel. 3.5.2 Infrastructure When a number of wireless clients are connected using a single AP, you have a Basic Service Set (BSS). Figure 3-5 BSS Example A series of overlapping BSS and a network medium, such as an Ethernet forms an Extended Service Set

(ESS) or infrastructure network. All communication is done through the AP, which relays data packets to other wireless clients or devices connected to the wired network. Wireless clients can then access resource, such as the printer, on the wired network. 3-6 Using the ZyAIR Utility ZyAIR B-620 Users Guide Figure 3-6 Infrastructure Network Example 3.6 Roaming In an infrastructure network, wireless clients are able to switch from one AP to another as they move between the coverage areas. During this period, the wireless client maintains uninterrupted connection to the network. This is roaming. As the wireless client moves from place to place, it is responsible for choosing the most appropriate AP depending on the signal strength, network utilization or other factors. The following figure depicts a roaming example. When Wireless Client B moves to position X, the ZyAIR in Wireless Client B automatically switches the channel to the one used by Access Point 2 in order to stay connected to the network. Using the ZyAIR Utility 3-7 ZyAIR B-620 Users Guide Figure 3-7 Roaming Example 3.7 The Site Survey Screen Use the Site Survey screen to scan for and connect to a wireless network automatically. 3-8 Using the ZyAIR Utility ZyAIR B-620 Users Guide Figure 3-8 ZyAIR Utility: Site Survey The following table describes the fields in the table. FIELD SSID BSSID Channel Signal WEP Search Table 3-5 ZyAIR Utility: Site Survey DESCRIPTION This field displays the SSID (or name) of each wireless device. This field displays the MAC address of the wireless device. This field displays the channel number used by each wireless device. This field displays the signal strength of each wireless device. This field shows whether the WEP data encryption is activated (Enable) or inactive

(Disable). Click Search to scan for available wireless device within transmission range. Using the ZyAIR Utility 3-9 ZyAIR B-620 Users Guide Table 3-5 ZyAIR Utility: Site Survey FIELD DESCRIPTION Click Connect to associate to the selected wireless device. Connect The following table describes the colors used for the entries in the Site Survey screen. Table 3-6 Color Indicator for Link Quality/Link Strength COLOR Green Blue Red DESCRIPTION Excellent link quality or link strength. Good link quality or link strength. Poor link quality or link strength. 3.7.1 Connecting to a Network Follow the steps below to connect to a network. Step 1. Click Search to scan for all available wireless networks within range. Step 2. To join a network, either click an entry in the table to select a wireless network and then click Connect or double-click an entry. If the WEP field is Enable for the selected wireless network, the following screen displays. Step 3. Figure 3-9 Site Survey Warning Step 4. Click OK to display the Security screen and refer to Section 4.2 to set up WEP keys. Otherwise click Cancel and connect to another wireless network without WEP encryption. Step 5. To verify that you have successfully connected to the selected network, check the network information in the Link Info screen. 3.8 Configuring the ZyAIR Wireless Parameters Click Configuration in the ZyAIR Utility program to display the Configuration screen as shown next. 3-10 Using the ZyAIR Utility ZyAIR B-620 Users Guide Figure 3-10 ZyAIR Utility: Configuration Follow the instructions in the table below to configure the wireless LAN related parameters. Refer to the next section for Profile field descriptions. Table 3-7 ZyAIR Utility: Configuration FIELD DESCRIPTION Configuration Operating Mode Select Infrastructure(BSS) or Ad-Hoc(IBSS) from the drop-down list box. Select Infrastructure(BSS) to associate to an AP. Select Ad-Hoc(IBSS) to associate to a peer ad-hoc computer. Refer to Section 3.5 for more information. Using the ZyAIR Utility 3-11 ZyAIR B-620 Users Guide FIELD Service Set Identifier (SSID) Transfer Rate Channel Power Saving Mode Table 3-7 ZyAIR Utility: Configuration DESCRIPTION Enter the SSID of the AP or the peer ad-hoc computer to which you want to associate in this field. To associate to an ad-hoc network, you must enter the same SSID as the peer ad-hoc computer. Enter Any to associate to or roam between any infrastructure wireless networks. This is the default setting. Select a transmission speed from the drop-down list box. Choose from Fully Auto

(default), 1M bit/sec, 2M bit/sec, 5.5M bit/sec and 11M bit/sec. Select the channel number from the drop-down list box. To associate to an ad-hoc network, you must use the same channel as the peer ad-hoc computer. Select Enable from the drop-down list menu to save power (especially for laptop computers). This forces the ZyAIR to go to sleep mode when it is not transmitting data. When you select Disable, the ZyAIR will never go to sleep mode. Restore Default Click Restore Default to reset all fields back to factory default values. Undo Changes Apply Changes Click Apply Changes to save the changes back to ZyAIR. Click Undo Changes to start configuring the fields again. 3.9 Network Configuration Profile Setting The Profile in the Configuration screen allows you to save the wireless network settings in the Configuration screen, use one of the pre-configured network profiles or reset the settings in the Configuration screen to the factory default values. The configuration Profile includes the security profiles in the Security screen. 3.9.1 Resetting to Factory Default Values To reset the fields in the Configuration screen back to factory default values select Default from the drop-

down list menu and click Activate. 3.9.2 Saving the Current Setting to a Profile To save the current settings in the Configuration screen to a new profile enter a descriptive name in the field provided and click Create. 3-12 Using the ZyAIR Utility ZyAIR B-620 Users Guide 3.9.3 Using a Pre-configured Profile To use a previously saved network profile select the profile file name from the drop-down list box and click Activate. 3.9.4 Deleting a Profile To delete an existing wireless network configuration select a profile from the drop-down list box and click Remove. Using the ZyAIR Utility 3-13 ZyAIR B-620 Users Guide Chapter 4 Wireless LAN Security This chapter shows you how to set up the wireless LAN security available in the ZyAIR. Introduction 4.1 Wireless LAN security is vital to your network to protect wireless communication between wireless clients and the wired network. Configure the wireless LAN security using the Security screen. If you do not enable any wireless security on your ZyAIR, communication between the ZyAIR and the wired network is accessible to any wireless networking device that is in the coverage area. 4.2 Data Encryption with WEP WEP (Wired Equivalent Privacy) encryption scrambles the data transmitted between the ZyAIR and the AP or other wireless stations to keep network communications private. It encrypts unicast and multicast communications in a network. Both the wireless clients and the access points must use the same WEP key for data encryption and decryption. Your ZyAIR allows you to configure up to four 64-bit or 128-bit WEP keys but only one key can be enabled at any one time. 4.2.1 Configuring the WEP Encryption on the ZyAIR Click the Security tab to display the Security screen as shown below. Wireless LAN Security 4-1 ZyAIR B-620 Users Guide Figure 4-1 ZyAIR Utility: WEP Encryption Follow the instructions in the table to configure the WEP encryptions. FIELD Encryption Table 4-1 ZyAIR Utility: WEP Encryption DESCRIPTION Select either 64 Bit or 128 Bit from the drop-down list box to activate WEP encryption and then fill in the related fields. Select Disable to deactivate the WEP data encryption. WEP Key Entry The WEP keys are used to encrypt data before it is transmitted. The values for the keys must be set up exactly the same on the APs or other peer ad-hoc wireless computers as they are on the ZyAIR. Key Type Select either the HEX or ASCII WEP key type. 4-2 Wireless LAN Security ZyAIR B-620 Users Guide Table 4-1 ZyAIR Utility: WEP Encryption FIELD DESCRIPTION Default Key Select one of the network keys to be the key used for data encryption. Network Key 1 4 Enter the WEP keys in the fields provided. If you select 64 Bit in the Key Type field.

Enter either ten hexadecimal digits in the range of A-F, a-f and 0-9

(e.g. 11AA22BB33) for HEX key type or

Enter five 7-bit printable ASCII characters (case sensitive) ranging from a-z, A-Z and 0-9 (e.g. MyKey) for ASCII key type. If you select 128 Bit in the Key Type field,

Enter either 26 hexadecimal digits in the range of A-F, a-f and 0-9

(for example, 00112233445566778899AABBCC) for HEX key type or

Enter 13 7-bit printable ASCII characters (case sensitive) ranging from a-z, A-Z and 0-9 (for example, MyKey12345678) for ASCII key type. You must configure all four WEP keys the first time you use the ZyAIR. Click Restore Default to reset all fields back to factory default values. Click Undo Changes to start configuring the fields again. Click Apply Changes to save the changes back to ZyAIR. Restore Default Undo Changes Apply Changes Wireless LAN Security 4-3 ZyAIR B-620 Users Guide Chapter 5 Advanced Configuration This chapter shows you how to configure advanced features of the ZyAIR. 5.1 Overview The following sections introduce the advanced features you can configure. 5.1.1 Threshold Control RTS/CTS Threshold The RTS (Request To Send) Threshold prevents collision when there is a hidden node problem. Hidden node problem occurs when two stations are within the range of the same access point, but are not within the range of each other. The following figure illustrates the hidden node problem. Both stations (STA) are within the range of the AP, however, they cannot hear each other. Therefore, they are considered as hidden nodes from each other. When a station starts data transmission with the access point, it might not know that the other station is already using the wireless medium. When these two stations send data at the same time, they might collide when arriving simultaneously at the AP. The collision will most certainly result in a loss of messages for both stations. Figure 5-1 RTS Threshold Thus, RTS Threshold mechanism provides a solution to prevent data collisions. When you enable RTS Threshold on a possible hidden station, this station and its AP will use a Request to Send/Clear to Send protocol (RTS/CTS). The station will send an RTS message to the AP, informing that it is going to transmit the data. Upon receipt, the Access Point will respond with a CTS message to all stations within its range to Wireless LAN Security 5-1 ZyAIR B-620 Users Guide notify all other stations to defer transmission. It will also confirm with the requesting station that the AP has reserved it for the time frame of the requested transmission. The RTS function will be activated if the packet size exceeds the value you set. It is highly recommended that you set the value ranging from 0 to 2305. Enabling the RTS Threshold causes redundant network overhead that could negatively affect the throughput performance instead of providing a remedy. Fragmentation Threshold Fragmentation improves the efficiency when high traffic flows along in the wireless network. 5.1.2 Authentication Mode The IEEE 802.11b standard describes a simple authentication method between the wireless clients and AP. Three authentication modes are defined: Auto, Open and Shared. Open authentication mode is implemented for ease-of-use and when security is not an issue. The wireless station and the AP do not share a secret key. Thus the wireless stations can associate with any AP and listen to any data transmitted plaintext. Shared authentication mode involves a shared secret key to authenticate the wireless station to the AP. This requires you to enable a security feature and specify a shared secret key (usually the WEP encryption and WEP key) on both the wireless station and the AP. Auto authentication mode allows the ZyAIR to switch between the open and shared key authentication modes automatically. Use the auto mode if you do not know the authentication mode of the other wireless clients. 5.1.3 Preamble Type A preamble is a signal used to synchronize the transmission timing in your wireless network. There are two preamble modes: Long and Short. Long preamble mode allows more processing time for each transmitted data packet. Short preamble mode allows less processing time for the transmitted data packets. Using short preamble mode may minimize overhead and maximize network throughput. However, short preamble mode is supported by IEEE 802.11b compliant wireless devices, thus wireless stations using short preamble mode cannot communicate with wireless stations using the original IEEE 802.11 standard. 5.2 The Advanced Screen To set the advanced features on the ZyAIR, click the Advanced tab. 5-2 Wireless LAN Security ZyAIR B-620 Users Guide Figure 5-2 ZyAIR Utility: Advanced The following table describes the fields in this screen. FIELD Transmit Threshold Control Table 5-1 ZyAIR Utility: Advanced DESCRIPTION Fragmentation Threshold The threshold (number of bytes) for the fragmentation boundary for directed messages. It is the maximum data fragment size that can be sent. Move the slider to set the fragmentation threshold. Wireless LAN Security 5-3 ZyAIR B-620 Users Guide FIELD Table 5-1 ZyAIR Utility: Advanced DESCRIPTION RTS/CTS Threshold Data with its frame size larger than this value will perform the RTS/CTS handshake. Setting this attribute to be larger than the maximum MSDU (MAC service data unit) size turns off the RTS/CTS handshake. Setting this attribute to zero turns on the RTS/CTS handshake. Move the slider to set the RTS/CTS threshold. Security Shared Mode

(Authenticate Access Point) Preamble Type Restore Default Undo Changes Apply Changes Select this checkbox to use a shared key to authenticate the access point. Refer to Section 5.1.2 for more information. Select a preamble type from the drop-down list menu. Choices are Long Preamble, Short Preamble and Auto. The default setting is Auto. Refer to Section 5.1.3 for more information. Click Restore Default to reset all fields back to factory default values. Click Undo Changes to start configuring the fields again. Click Apply Changes to save the changes back to ZyAIR. 5-4 Wireless LAN Security ZyAIR B-620 Users Guide Chapter 6 Removing and Upgrading the ZyAIR Utility This chapter describes how to uninstall or upgrade the ZyAIR Utility. 6.1 Removing the ZyAIR Utility Follow the steps below to remove (or uninstall) the ZyAIR Utility from your computer. Step 1. Click Start, Programs, ZyAIR Wireless LAN Utility, Uninstall. Step 2. When prompted, click Yes to remove the driver and the utility software. Step 3. When prompted to restart your computer, click Yes and then click Finish. 6.2 Upgrading the ZyAIR Utility Before you uninstall the ZyAIR Utility, save the current network configuration. To perform the upgrade, follow the steps below. Step 1. Download the latest version of the utility from the ZyXEL web site and save the file on your Step 2. computer. Follow the steps in the Removing the ZyAIR Utility section to remove the current ZyAIR Utility from your computer. Step 3. Restart the computer when prompted. Step 4. After restarting, refer to the procedure in the Quick Installation Guide to install the new utility Step 5. Check the version numbers in the About screen to make sure the new utility is installed software. properly. Removing and Upgrading the ZyAIR Utility 6-1 ZyAIR B-620 Users Guide Chapter 7 Troubleshooting This chapter covers potential problems and the possible remedies. After each problem description, some instructions are provided to help you to diagnose and to solve the problem. 7.1 Problems Starting the ZyAIR Utility Program Table 7-1 Troubleshooting Starting ZyAIR Utility Program Cannot start the ZyAIR Wireless LAN Utility The ZyAIR Wireless LAN Utility displays only three tabs. Use the Device Manager to check for possible hardware conflicts. Click Start, Settings, Control Panel, System, Hardware and Device Manager. Verify the status of the ZyAIR under Network Adapter. (Steps may vary depending on the version of Windows). If the error persists, you may have a hardware problem. In this case, you should contact your local vendor. When the ZyAIR Wireless LAN Utility displays only three tabs, you are using the Windows XP wireless configuration tool at the same time. Refer to the Disable Windows XP Wireless LAN Configuration Tool chapter to disable the Windows XP wireless configuration tool. 7.2 Problems Communicating With Other Computers Table 7-2 Troubleshooting Communication Problems PROBLEM CORRECTIVE ACTION The ZyAIR computer cannot communicate with the other computer. A. Infrastructure Make sure that the AP and the associated computers are turned on and working properly. Make sure the ZyAIR computer and the associated AP use the same SSID. Change the AP and the associated wireless clients to use another radio channel if interference is high. Make sure that the computer and the AP share the same security option and key. Verify the settings in the Security screen. Troubleshooting 7-1 ZyAIR B-620 Users Guide Table 7-2 Troubleshooting Communication Problems PROBLEM B. Ad-Hoc (IBSS) Verify that the peer computer(s) is turned on. CORRECTIVE ACTION Make sure the ZyAIR computer and the peer computer(s) are using the same SS ID and channel. Make sure that the computer and the peer computer(s) share the same security option and key. Change the wireless clients to use another radio channel if interference is high. 7.3 Problem with the Link Status PROBLEM The Link Quality is poor all the time. The Link Strength is poor all the time. The Site Survey screen displays all entries in red. Table 7-3 Troubleshooting Link Quality CORRECTIVE ACTION Move your computer closer to the AP or the peer computer(s) within the transmission range. There is too much radio interference (for example microwave or another AP using the same channel) around your wireless network. Relocate or reduce the radio interference. Move your computer closer to the AP or peer computer(s) within the transmission range. There is too much radio interference (for example microwave or another AP using the same channel) around your wireless network. Relocate or reduce the radio interference. Move your computer closer to the AP or peer computer(s) within the transmission range. There is too much radio interference (for example microwave or another AP using the same channel) around your wireless network. Relocate or reduce the radio interference. 7-2 Troubleshooting ZyAIR B-620 Users Guide A About ..............................................................3-3 Access Point....................................................1-1 Accessing the ZyAIR Utility...........................3-1 Advanced Configuration.................................5-1 AP .............................................See Access Point Applications Ad-hoc ........................................................1-1 Infrastructure...............................................1-2 Authentication Mode.......................................5-2 Auto ............................................................5-2 Open............................................................5-2 Shared .........................................................5-2 Auto authentication mode ...............................5-2 B Basic Service Set.................................... See BSS BSS .................................................................3-6 C Clear to Send protocol.....................................5-1 Common Screen Command Buttons...............3-3 Communication Problem ................................7-1 Ad-hoc(IBSS) .............................................7-2 Infrastructure...............................................7-1 Connecting to a Network ..............................3-10 Copyright ...........................................................ii Disclaimer......................................................ii Trademarks ....................................................ii CTS ..........................................See Clear to Send Customer Support ............................................vii D data collision ...................................................5-1 Data encryption...............................................4-1 Index Disable Windows XP Wireless Support..........2-1 E ESS..................................................................3-6 Extended Service Set.............................. See ESS F Federal Communications Commission (FCC) Interference Statement....................................v Fragmentation Threshold ................................5-2 H Hidden Node problem.....................................5-1 I IBSS ................................................................3-5 Independent Basic Service Set ..............See IBSS Information for Canadian Users........................iv Caution..........................................................iv Note...............................................................iv L Link Info .........................................................3-1 N Network Configuration Profile......................3-12 Reset to factory defaults............................3-12 Saving........................................................3-12 Using pre-configured profile.....................3-13 Network Type .................................................3-5 Ad-Hoc(IBSS).............................................3-5 Infrastructure...............................................3-6 Index A ZyAIR B-620 Users Guide O Online Registration........................................... iii Open authentication mode ..............................5-2 Operating Mode......................See Network Type P Power Saving Mode...................................... 3-12 Preamble Mode...............................................5-2 Long............................................................5-2 Short............................................................5-2 Preface ............................................................ xiii problem description ........................................7-1 Profile Network Configuration............................. 3-12 R Related Documentation................................... xiii Request to Send protocol ................................5-1 Roaming..........................................................3-7 Example......................................................3-7 RTS......................................See Request to Send RTS/CTS Threshold .......................................5-1 S Service Set Identity...............................See SSID Shared authentication mode............................5-2 Site Survey...............................................3-8, 3-9 SSID ...............................................................3-5 Syntax Conventions........................................ xiii T Transfer Rate ................................................ 3-12 Transmission Speed...................................... 3-12 Transmission Speeds ......................................3-5 Troubleshooting..............................................7-1 Checking Hardware Conflict ......................7-1 Communication problems...........................7-1 Radio interference.......................................7-2 Starting ZyAIR Utility ................................7-1 Survery........................................................7-2 U Using the ZyAIR Utility .................................3-1 Note.............................................................3-1 V Viewing Current Configuration ......................3-1 W Warranty ...........................................................iii Note...............................................................iii WEP................................................................4-1 WEP Data Encryption Configuring.................................................4-1 Field Descriptions.......................................4-2 WEP Data Encryption with.............................4-1 WEP Key ........................................................4-2 Type ............................................................4-2 Windows XP Requirement .............................2-1 Wired Equivalent Privacy..................... See WEP Wireless LAN .................................................1-1 Applications................................................1-1 Benefits.......................................................1-1 Wireless LAN Parameters...............................3-4 Channel.......................................................3-5 Configuring...............................................3-10 Network Type .............................................3-5 SSID............................................................3-5 Transmission Rate.......................................3-5 Wireless LAN Security...................................4-1 Data Encryption with WEP.........................4-1 Wireless Network Basics ................................1-1 WLAN ................................... See Wireless LAN Z ZyAIR Utility..................................................6-1 B Index About ..........................................................3-4 Before you upgrade.....................................6-1 Link Info .....................................................3-2 Removing....................................................6-1 ZyAIR B-620 Users Guide Site Survey ..................................................3-9 Upgrading....................................................6-1 WEP Encryption..........................................4-2 Index C Filename:

Directory:

Template:

ZyAIRB620-Utility_UG_2003-04-15 D:\Projects\ZyAIR\UtilityGuide C:\Documents and Settings\Administrator\Application Data\Microsoft\Templates\Normal.dot ZyAIR Wireless LAN Utility cindy For ZyAIR B-120 and B-220 only. (ZyXEL logo) 5/28/2003 1:38 PM 12 5/30/2003 1:25 PM cindy 17 Minutes 5/30/2003 1:26 PM Title:

Subject:

Author:

Keywords:

Comments:

Creation Date:

Change Number:

Last Saved On:

Last Saved By:

Total Editing Time:

Last Printed On:

As of Last Complete Printing 51 7,952 (approx.) Number of Pages:

Number of Words:

Number of Characters:

45,329 (approx.)