app
s
|
Applicant Information
|
|
various
|
Effective |
2018-07-05
|
various
|
2018-04-26
|
various
|
2018-02-14
|
various
|
2018-01-11
|
various
|
2018-01-10
|
various
|
2017-12-20
|
various
|
2017-12-19
|
various
|
2017-12-12
|
various
|
2017-12-05
|
various
|
2017-11-29
|
various
|
2017-10-18
|
various
|
2017-10-03
|
various
|
2017-08-30
|
various
|
2017-08-15
|
various
|
2017-07-11
|
various
|
2017-07-07
|
various
|
2017-07-06
|
various
|
2017-06-05
|
various
|
2017-06-02
|
various
|
2017-03-17
|
various
|
2017-02-22
|
various
|
2017-02-17
|
various
|
2017-02-16
|
various
|
2017-02-14
|
various
|
2017-02-03
|
various
|
2017-02-02
|
various
|
2017-02-01
|
various
|
2017-01-16
|
various
|
2016-12-21
|
various
|
2016-12-12
|
various
|
2016-12-06
|
various
|
2016-10-10
|
various
|
2016-10-06
|
various
|
2016-09-13
|
various
|
2016-09-08
|
various
|
2016-07-22
|
various
|
2016-07-11
|
various
|
2016-06-03
|
various
|
Applicant's complete, legal business name |
Intel Corporation
|
various
|
FCC Registration Number (FRN) |
0008035131
|
various
|
Physical Address |
100 Center Point Circle Suite 200
|
various
|
100 Center Point Circle
|
various
|
Columbia
|
various
|
United States
|
|
app
s
|
TCB Information
|
various
|
TCB Application Email Address |
h******@acbcert.com
|
various
|
H******@acbcert.com
|
various
|
h******@ACBcert.com
|
various
|
TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
various
|
A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
|
|
app
s
|
FCC ID
|
various
|
Grantee Code |
PD9
|
various
|
Equipment Product Code |
8265NG
|
|
app
s
|
Person at the applicant's address to receive grant or for contact
|
various
|
Name |
S****** C**** H****
|
various
|
Title |
Product Regulations Engineer
|
various
|
Telephone Number |
803-3********
|
various
|
Fax Number |
803-2********
|
various
|
E-mail |
s******@intel.com
|
|
app
s
|
Technical Contact
|
various
|
Firm Name |
RF Exposure Lab
|
various
|
Intel Mobile Communications
|
various
|
Dekra Testing and Certification
|
various
|
Name |
J******** M******
|
various
|
S****** H******
|
various
|
V******** W****
|
various
|
Physical Address |
802 N. Twin Oaks Valley Road, Suite 105
|
various
|
100 Center Point Circle Suite 200
|
various
|
802 North Twin Oaks Valley Rd.
|
various
|
100 Center Point Circle
|
various
|
No. 5-22, Ruishukeng, Linkou District
|
various
|
802 N. Twin Oaks Valley Rd. Suite 105
|
various
|
San Marcos, Arizona 92069
|
various
|
San Marcos, California 92069
|
various
|
Columbia, Virginia 29210
|
various
|
Columbia, South Carolina 29210
|
various
|
San Marcos, Pennsylvania 92069
|
various
|
San Marcos, 92069
|
various
|
Columbia, 29210
|
various
|
New Taipei City, 24451
|
various
|
San Marcos, Utah 92069
|
various
|
Columbia, 92069
|
various
|
United States
|
various
|
Taiwan
|
various
|
Telephone Number |
+1760********
|
various
|
+1803********
|
various
|
760-4********
|
various
|
+1760********
|
various
|
76047********
|
various
|
80321********
|
various
|
88622******** Extension:
|
various
|
88622********
|
various
|
Fax Number |
760-4********
|
various
|
76047********
|
various
|
80321********
|
various
|
88622********
|
various
|
80321********
|
various
|
E-mail |
i******@rfexposurelab.com
|
various
|
s******@Intel.com
|
various
|
V******@dekra.com
|
various
|
S******@Intel.com
|
|
app
s
|
Non Technical Contact
|
|
|
n/a |
|
app
s
|
Confidentiality (long or short term)
|
various |
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes |
various | Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes |
various | If so, specify the short-term confidentiality release date (MM/DD/YYYY format) | 01/01/2019 |
various | 10/23/2018 |
various | 08/12/2018 |
various | 07/10/2018 |
various | 07/09/2018 |
various | 06/18/2018 |
various | 06/17/2018 |
various | 06/10/2018 |
various | 06/03/2018 |
various | 05/28/2018 |
various | 04/16/2018 |
various | 04/01/2018 |
various | 02/25/2018 |
various | 02/26/2018 |
various | 02/11/2018 |
various | 01/04/2018 |
various | 01/03/2018 |
various | 01/02/2018 |
various | 12/02/2017 |
various | 11/28/2017 |
various | 09/13/2017 |
various | 08/21/2017 |
various | 08/16/2017 |
various | 08/15/2017 |
various | 08/13/2017 |
various | 08/02/2017 |
various | 08/01/2017 |
various | 07/31/2017 |
various | 07/15/2017 |
various | 06/19/2017 |
various | 06/10/2017 |
various | 06/04/2017 |
various | 04/08/2017 |
various | 04/04/2017 |
various | 03/12/2017 |
various | 03/07/2017 |
various | 01/17/2017 |
various | 01/07/2017 |
various | 11/30/2016 |
|
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
|
|
|
app
s
|
Cognitive Radio & Software Defined Radio, Class, etc
|
various |
Is this application for software defined/cognitive radio authorization? | No |
various | Equipment Class | DSS - Part 15 Spread Spectrum Transmitter |
various | DTS - Digital Transmission System |
various | NII - Unlicensed National Information Infrastructure TX |
various | JBP - Part 15 Class B Computing Device Peripheral |
various | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Intel Dual Band Wireless-AC 8265 |
various | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No |
various | Modular Equipment Type | Single Modular Approval |
various | Purpose / Application is for | Class II Permissive Change |
various | Original Equipment |
various | Composite Equipment: Is the equipment in this application a composite device subject to an
additional equipment authorization? | Yes |
various | Related Equipment: Is the equipment in this application part of a system
that operates with, or is marketed with, another device that requires an equipment authorization? | No |
various | Grant Comments | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.06W/kg and 1.10W/kg respectively.
This change is to request approval for portable category specific host notebook PC, HP model number, HSN-I17C-4, with antennas HongBo part no 260-27178 Tx1 and 260-27179 Tx2.
Antenna is of the same type and lower gain from original approval. SAR
testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.12W/kg and 1.58W/kg respectively.
This change is to request approval for portable category specific host notebook PC, HP model number, HSN-I16C, with antennas HongBo part no 260-27174 Tx1 and 260-27175 Tx2.
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter
product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance,
including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.00W/kg and 1.58W/kg respectively.
This change is to request approval for portable category specific host notebook PC, HP model number, HSN-I16C, with antennas HongBo part no 260-27174 Tx1 and 260-27175 Tx2.
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter
product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.51W/kg and 1.10W/kg respectively.
This change is to request approval for portable category specific host notebook PC, HP model number, HSN-I17C-4, with antennas HongBo part no 260-27178 Tx1 and 260-27179 Tx2.
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be
met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a client only device containing a 2 x
2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.46W/kg and 1.58W/kg respectively.
This change is to request approval for portable category specific host notebook PC, HP model number, HSN-I16C, with antennas HongBo part no 260-27174 Tx1 and 260-27175 Tx2.
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for
each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.49W/kg and 1.10W/kg respectively.
This change is to request approval for portable category specific host notebook PC, HP model number, HSN-I17C-4, with antennas HongBo part no 260-27178 Tx1 and 260-27179 Tx2.
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.07W/kg and 1.46W/kg respectively.
This change establishes portable category SAR conditions for the host platform and antennas listed.
Lenovo model - Flex6-14IKB PC with HongBo antennas part number DC33001HV10 Main and Aux and Speed DC33001HX10 Main and Aux.
Antenna is of the same type as original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for
each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.93W/kg and 1.46W/kg respectively.
This change establishes portable category SAR conditions for the host platform and antennas listed. Lenovo model - Flex6-14IKB PC with HongBo antennas part number DC33001HV10 Main and Aux and Speed DC33001HX10 Main and Aux.
Antenna is of the same type as original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and
Simultaneous SAR values are 1.04W/kg and 1.46W/kg respectively.
This change establishes portable category SAR conditions for the host platform and antennas listed. Lenovo model - Flex6-14IKB PC with HongBo antennas part number DC33001HV10 Main and Aux and Speed DC33001HX10 Main and Aux.
Antenna is of the same type as original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.16W/kg and 1.29W/kg respectively.
This change is to establish conditions based on modular stand-alone SAR evaluation to establish minimum 5mm antenna to user separation distance at a maximum SAR value less than 0.8W/kg, 1g for mixed mobile and portable conditions according to KDB 447498 D01 General RF Exposure Guidance v05 and KDB616217 D04 for Laptop and Tablets v01.
Antenna is of the same type as original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for
each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.76W/kg and 1.29W/kg respectively.
This change is to establish conditions based on modular stand-alone SAR evaluation to establish minimum 5mm antenna to user separation distance at a maximum SAR value less than 0.8W/kg, 1g for mixed mobile and portable conditions according to KDB 447498 D01 General RF Exposure Guidance v05 and KDB616217 D04 for Laptop and Tablets v01.
Antenna is of the same type as original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and
Simultaneous SAR values are 0.45W/kg and 1.29W/kg respectively.
This change is to establish conditions based on modular stand-alone SAR evaluation to establish minimum 5mm antenna to user separation distance at a maximum SAR value less than 0.8W/kg, 1g for mixed mobile and portable conditions according to KDB 447498 D01 General RF Exposure Guidance v05 and KDB616217 D04 for Laptop and Tablets v01.
Antenna is of the same type as original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.22W/kg and 1.42W/kg respectively.
This change is to request approval for portable category specific host notebook PC, Lenovo model number - Lenovo Yoga 730-15IKB 81CU, with antennas Acon part no AML6Y-100053 Tx1 and
AML6Y-100054 Tx2 and Pulse Electronics part no SH0697C Tx1 and SH0698C Tx2.
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and
Simultaneous SAR values are 0.75W/kg and 1.42W/kg respectively.
This change is to request approval for portable category specific host notebook PC, Lenovo model number - Lenovo Yoga 730-15IKB 81CU, with antennas Acon part no AML6Y-100053 Tx1 and AML6Y-100054 Tx2 and Pulse Electronics part no SH0697C Tx1 and SH0698C Tx2.
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for
each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.60W/kg and 1.42W/kg respectively.
This change is to request approval for portable category specific host notebook PC, Lenovo model number - Lenovo Yoga 730-15IKB 81CU, with antennas Acon part no AML6Y-100053 Tx1 and AML6Y-100054 Tx2 and Pulse Electronics part no SH0697C Tx1 and SH0698C Tx2.
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.32W/kg and 0.78W/kg respectively.
This change is to request approval for portable category specific host notebook PC, Lenovo model number - Lenovo Yoga 730-13IKB 81CT, with antennas Acon part no AML6Y-100032 Tx1 and AML6Y-100031 Tx2 and Pulse Electronics part no SH0680C Tx1 and SH0679C Tx2.
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and
transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.48W/kg and 0.78W/kg respectively.
This change is to request approval for portable category specific host notebook PC, Lenovo model number - Lenovo Yoga 730-13IKB 81CT, with antennas Acon part no AML6Y-100032 Tx1 and AML6Y-100031 Tx2 and Pulse Electronics part no SH0680C Tx1 and SH0679C Tx2.
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.13W/kg and 0.78W/kg respectively.
This change is to request approval for portable category specific host notebook PC, Lenovo model number - Lenovo Yoga 730-13IKB 81CT, with antennas Acon part no AML6Y-100032 Tx1 and
AML6Y-100031 Tx2 and Pulse Electronics part no SH0680C Tx1 and SH0679C Tx2.
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.15W/kg and 1.29W/kg respectively.
This change is to request approval for portable category specific host notebook PC, HP model number - HSN-I17C-5, with antennas Acon part no ANP6Y-100182 Tx1 and ANP6Y-100183 Tx2 and WNC part no 81EAA415.GAN Tx1 and 82EAA415.GAP (Tx2).
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and
transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.21W/kg and 1.59W/kg respectively.
This change is to request approval for portable category specific host notebook PC, HP model number - HSN-I17C-4, with antennas Acon part no ANP6Y-100180 Tx1 and ANP6Y-100181 Tx2 and WNC part no 81EAA415.GAL Tx1 and 82EAA415.GAM Tx2.
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.43W/kg and 1.59W/kg respectively.
This change is to request approval for portable category specific host notebook PC, HP model number - HSN-I17C-4, with antennas Acon part no ANP6Y-100180 Tx1 and ANP6Y-100181 Tx2 and WNC part no 81EAA415.GAL Tx1 and 82EAA415.GAM Tx2.
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.41W/kg and 1.53W/kg respectively.
This change is to request approval for portable category specific host notebook PC, HP model number - HSN-I13C-4, with antennas Acon part no ANP6Y-100180 Tx1 and ANP6Y-100181 Tx2 and WNC part no 81EAA415.GAL Tx1 and 81EAA415.GAM Tx2.
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.09W/kg and 1.29W/kg respectively.
This change is to request approval for portable category specific host notebook PC, HP model number - HSN-I17C-5, with antennas Acon part no ANP6Y-100182 Tx1 and ANP6Y-100183 Tx2 and WNC part no 81EAA415.GAN Tx1 and 82EAA415.GAP Tx2.
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating
compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.12W/kg and 1.53W/kg respectively.
This change is to request approval for portable category specific host notebook PC, HP model number - HSN-I13C-4, with antennas Acon part no ANP6Y-100180 Tx1 and ANP6Y-100181 Tx2 and WNC part no 81EAA415.GAL Tx1 and 81EAA415.GAM Tx2.
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.14W/kg and 1.53W/kg respectively.
This change is to request approval for portable category specific host notebook PC, HP model number - HSN-I13C-4, with antennas Acon part no ANP6Y-100180 Tx1 and ANP6Y-100181 Tx2 and WNC part no 81EAA415.GAL Tx1 and 81EAA415.GAM Tx2.
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.16W/kg and 1.59W/kg respectively.
This change is to request approval for portable category specific host notebook PC, HP model number - HSN-I17C-4, with antennas Acon part no ANP6Y-100180 Tx1 and ANP6Y-100181 Tx2 and WNC part no
81EAA415.GAL Tx1 and 82EAA415.GAM Tx2.
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and
transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.14W/kg and 1.29W/kg respectively.
This change is to request approval for portable category specific host notebook PC, HP model number - HSN-I17C-5, with antennas Acon part no ANP6Y-100182 Tx1 and ANP6Y-100183 Tx2 and WNC part no 81EAA415.GAN Tx1 and 82EAA415.GAP (Tx2).
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.31W/kg and 1.40W/kg respectively.
This change is to request approval for portable category specific host notebook PC, HP model number - HSN-I13C-5, with antennas Acon part no ANP6Y-100182 Tx1 and ANP6Y-100183 Tx2 and WNC part no 81EAA415.GAN Tx1 and 81EAA415.GAP Tx2.
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.13W/kg and 1.40W/kg respectively.
This change is to request approval for portable category specific host notebook PC, HP model number - HSN-I13C-5, with antennas Acon part no ANP6Y-100182 Tx1 and ANP6Y-100183 Tx2 and WNC part no 81EAA415.GAN Tx1 and 81EAA415.GAP Tx2.
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.14W/kg and 1.57W/kg respectively.
This change is to request approval for portable category specific host notebook PC, HP model number - HSN-I16C, with antennas Acon part no ANP6Y-100178 Tx1 and ANP6Y-100179 Tx2 and WNC part no
81EAA415.GAJ Tx1 and 81EAA415.GAK Tx2.
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous
transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy
RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.43W/kg and 1.57W/kg respectively.
This change is to request approval for portable category specific host notebook PC, HP model number - HSN-I16C, with antennas Acon part no ANP6Y-100178 Tx1 and ANP6Y-100179 Tx2 and WNC part no 81EAA415.GAJ Tx1 and 81EAA415.GAK Tx2.
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating
compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.06W/kg and 1.40W/kg respectively.
This change is to request approval for portable category specific host notebook PC, HP model number - HSN-I13C-5, with antennas Acon part no ANP6Y-100182 Tx1 and ANP6Y-100183 Tx2 and WNC part no 81EAA415.GAN Tx1 and 81EAA415.GAP Tx2.
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating
compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.01W/kg and 1.57W/kg respectively.
This change is to request approval for portable category specific host notebook PC, HP model number - HSN-I16C, with antennas Acon part no ANP6Y-100178 Tx1 and ANP6Y-100179 Tx2 and WNC part no 81EAA415.GAJ Tx1 and 81EAA415.GAK Tx2.
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous
transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy
RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.12W/kg and 1.25W/kg respectively.
This change is to request approval for portable category specific host notebook PC, Lenovo model number - TP00078C, with antennas Hua Cheng Tech. part no DC33001WO00 Tx1 and DC33001WO10 Tx2 and Hua Cheng Tech. part no DC33001WM50 Tx1 and DC33001WO10 Tx2.
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter
must not transmit simultaneously with any other antenna or transmitter, except in accordance with
FCC multi-transmitter product procedures. Grantee must provide installation and operating
instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s)
tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.
End-users and installers must be provided with transmitter operating conditions for satisfying RF
exposure compliance. The highest reported Body and Simultaneous SAR values are 0.23W/kg and
1.25W/kg respectively.
This change is to request approval for portable category specific host notebook PC, Lenovo model number - TP00078C, with antennas Hua Cheng Tech. part no DC33001WO00 Tx1 and DC33001WO10 Tx2 and Hua Cheng Tech. part no DC33001WM50 Tx1 and DC33001WO10 Tx2.
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not
transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for
complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable
configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser
gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine
applicable host configurations to ensure RF exposure compliance, including simultaneous
transmission SAR requirements according to published KDB 616217 Supplement documentation.
When all conditions of this filing cannot be met installation of this device into specific final products
may require the submission of a permissive change application, containing appropriate data
demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna
installation instructions and transmitter operating conditions to satisfy RF exposure compliance.
Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz
band operations as described in this filing. OEM/Host integrator is responsible for complying with the
instructions and requirements for each transmitter they choose to integrate into a host product. The
highest reported Body and Simultaneous SAR values are 0.89W/kg and 1.25W/kg respectively.
This change is to request approval for portable category specific host notebook PC, Lenovo model number - TP00078C, with antennas Hua Cheng Tech. part no DC33001WO00 Tx1 and DC33001WO10 Tx2 and Hua Cheng Tech. part no DC33001WM50 Tx1 and DC33001WO10 Tx2.
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter
must not transmit simultaneously with any other antenna or transmitter, except in accordance with
FCC multi-transmitter product procedures. Grantee must provide installation and operating
instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s)
tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.
End-users and installers must be provided with transmitter operating conditions for satisfying RF
exposure compliance. The highest reported Body and Simultaneous SAR values are 0.12W/kg and
1.51W/kg respectively.
This change is to request approval for portable category specific host notebook PC, HP model number- HSN-I12C, with antennas Acon part no ANP6Y-100178 Tx1 and ANP6Y-100179 Tx2 and WNC part no
81EAA415.GAJ Tx1 and 81EAA415.GAK Tx2.
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not
transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for
complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable
configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser
gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine
applicable host configurations to ensure RF exposure compliance, including simultaneous
transmission SAR requirements according to published KDB 616217 Supplement documentation.
When all conditions of this filing cannot be met installation of this device into specific final products
may require the submission of a permissive change application, containing appropriate data
demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna
installation instructions and transmitter operating conditions to satisfy RF exposure compliance.
Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz
band operations as described in this filing. OEM/Host integrator is responsible for complying with the
instructions and requirements for each transmitter they choose to integrate into a host product. The
highest reported Body and Simultaneous SAR values are 1.18W/kg and 1.51W/kg respectively.
This change is to request approval for portable category specific host notebook PC, HP model number- HSN-I12C, with antennas Acon part no ANP6Y-100178 Tx1 and ANP6Y-100179 Tx2 and WNC part no 81EAA415.GAJ Tx1 and 81EAA415.GAK Tx2.
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.36W/kg and 1.51W/kg respectively.
This change is to request approval for portable category specific host notebook PC, HP model number- HSN-I12C, with antennas Acon part no ANP6Y-100178 Tx1 and ANP6Y-100179 Tx2 and WNC part no 81EAA415.GAJ Tx1 and 81EAA415.GAK Tx2.
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter
must not transmit simultaneously with any other antenna or transmitter, except in accordance with
FCC multi-transmitter product procedures. Grantee must provide installation and operating
instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s)
tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.
End-users and installers must be provided with transmitter operating conditions for satisfying RF
exposure compliance. The highest reported Body and Simultaneous SAR values are 0.19W/kg and
1.50W/kg respectively.
This change is to request approval for portable category specific host notebook PC, Lenovo model number - TP00076D, with antennas Jiengtai part no 025.90169.0001 Tx1 and 025.9016A.0001 Tx2 and WNC part no 025.90169.0011 Tx1 and 025.9016A.0011 Tx2.
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not
transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for
complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable
configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser
gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine
applicable host configurations to ensure RF exposure compliance, including simultaneous
transmission SAR requirements according to published KDB 616217 Supplement documentation.
When all conditions of this filing cannot be met installation of this device into specific final products
may require the submission of a permissive change application, containing appropriate data
demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna
installation instructions and transmitter operating conditions to satisfy RF exposure compliance.
Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz
band operations as described in this filing. OEM/Host integrator is responsible for complying with the
instructions and requirements for each transmitter they choose to integrate into a host product. The
highest reported Body and Simultaneous SAR values are 0.78W/kg and 1.50W/kg respectively.
This change is to request approval for portable category specific host notebook PC, Lenovo model number - TP00076D, with antennas Jiengtai part no 025.90169.0001 Tx1 and 025.9016A.0001 Tx2 and WNC part no 025.90169.0011 Tx1 and 025.9016A.0011 Tx2.
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.27W/kg and 1.50W/kg respectively.
This change is to request approval for portable category specific host notebook PC, Lenovo model number - TP00076D, with antennas Jiengtai part no 025.90169.0001 Tx1 and 025.9016A.0001 Tx2 and WNC part no 025.90169.0011 Tx1 and 025.9016A.0011 Tx2.
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not
transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for
complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable
configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser
gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine
applicable host configurations to ensure RF exposure compliance, including simultaneous
transmission SAR requirements according to published KDB 616217 Supplement documentation.
When all conditions of this filing cannot be met installation of this device into specific final products
may require the submission of a permissive change application, containing appropriate data
demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna
installation instructions and transmitter operating conditions to satisfy RF exposure compliance.
Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz
band operations as described in this filing. OEM/Host integrator is responsible for complying with the
instructions and requirements for each transmitter they choose to integrate into a host product. The
highest reported Body and Simultaneous SAR values are 0.88W/kg and 1.56W/kg respectively.
This change is to request approval for portable category specific host notebook PC, Lenovo model number Lenovo MIIX 520-12IKB, with antennas Inpaq part no 64451203900050 (Tx1) & 64451203900060 (Tx2) and South Star part no 64451203900010 (Tx1) & 64451203900020 (Tx2).
Antenna is of same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter
must not transmit simultaneously with any other antenna or transmitter, except in accordance with
FCC multi-transmitter product procedures. Grantee must provide installation and operating
instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s)
tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.
End-users and installers must be provided with transmitter operating conditions for satisfying RF
exposure compliance. The highest reported Body and Simultaneous SAR values are 0.23W/kg and
1.56W/kg respectively.
This change is to request approval for portable category specific host notebook PC, Lenovo model number Lenovo MIIX 520-12IKB, with antennas Inpaq part no 64451203900050 (Tx1) & 64451203900060 (Tx2) and South Star part no 64451203900010 (Tx1) & 64451203900020 (Tx2).
Antenna is of same type and lower gain from original approval. SAR testing was performed to
demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and
Simultaneous SAR values are 1.38W/kg and 1.56W/kg respectively.
This change is to request approval for portable category specific host notebook PC, Lenovo model number Lenovo MIIX 520-12IKB, with antennas Inpaq part no 64451203900050 (Tx1) & 64451203900060 (Tx2) and South Star part no 64451203900010 (Tx1) & 64451203900020 (Tx2).
Antenna is of same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not
transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for
complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable
configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser
gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine
applicable host configurations to ensure RF exposure compliance, including simultaneous
transmission SAR requirements according to published KDB 616217 Supplement documentation.
When all conditions of this filing cannot be met installation of this device into specific final products
may require the submission of a permissive change application, containing appropriate data
demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna
installation instructions and transmitter operating conditions to satisfy RF exposure compliance.
Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz
band operations as described in this filing. OEM/Host integrator is responsible for complying with the
instructions and requirements for each transmitter they choose to integrate into a host product. The
highest reported Body and Simultaneous SAR values are 0.81W/kg and 1.46W/kg respectively.
This change is to request approval for portable category specific host notebook PC, Lenovo model
number - Lenovo V330-14IKB, with antennas Hightek part no 0ACCN017009N Tx1 and
0ACCN017010N Tx2 and Tondga part no T-543-9021146-1 Tx1 and T-543-9021146-2 Tx2.
Antenna is of same type and lower gain from original approval. SAR testing was performed to
demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter
must not transmit simultaneously with any other antenna or transmitter, except in accordance with
FCC multi-transmitter product procedures. Grantee must provide installation and operating
instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s)
tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.
End-users and installers must be provided with transmitter operating conditions for satisfying RF
exposure compliance. The highest reported Body and Simultaneous SAR values are 0.07W/kg and
1.46W/kg respectively.
This change is to request approval for portable category specific host notebook PC, Lenovo model
number - Lenovo V330-14IKB, with antennas Hightek part no 0ACCN017009N Tx1 and
0ACCN017010N Tx2 and Tondga part no T-543-9021146-1 Tx1 & T-543-9021146-2 Tx2.
Antenna is of same type and lower gain from original approval. SAR testing was performed to
demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine
applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be
provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.28W/kg and 1.46W/kg respectively.
This change is to request approval for portable category specific host notebook PC, Lenovo model number - Lenovo V330-14IKB, with antennas Hightek part no 0ACCN017009N Tx1 and 0ACCN017010N Tx2 and Tondga part no T-543-9021146-1 Tx1 and T-543-9021146-2 Tx2.
Antenna is of same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for
each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.48W/kg and 0.59W/kg respectively. The highest reported Extremity and Simultaneous SAR values are 2.34W/kg and 3.85W/kg respectively.
This change is to request approval for portable category specific host PC, HP model: TPC-Q036-BP PC with WNC antennas part number DQ6415GBC00 (81EAA415.GBC) (Main) & DQ6415GBD00 (81EAA415.GBD) (Aux) and Inpaq DQ60PLB0113 (WAPLB01183) (Main) & DQ60PLB0239 (WAPLB02438) (Aux).
Antenna is of same type and lower gain from original approval. SAR testing was performed to
demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are <0.1W/kg and 0.59W/kg respectively.
The highest reported Extremity and Simultaneous SAR values are 0.10W/kg and 3.85W/kg respectively.
This change is to request approval for portable category specific host PC, HP model: TPC-Q036-BP PC with WNC antennas part number DQ6415GBC00 (81EAA415.GBC) (Main) & DQ6415GBD00 (81EAA415.GBD) (Aux) and Inpaq DQ60PLB0113 (WAPLB01183) (Main) & DQ60PLB0239
(WAPLB02438) (Aux).
Antenna is of same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and
Simultaneous SAR values are 0.48W/kg and 1.53W/kg respectively.
This change is to request approval for portable category specific host notebook PC, Lenovo model number : Lenovo Yoga 720-12IKB, with antennas South Star part no 1109-02353 (Tx1) & 1109-02360 (Tx2).
Antenna is of same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for
each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.39W/kg and 1.53W/kg respectively.
This change is to request approval for portable category specific host notebook PC, Lenovo model number : Lenovo Yoga 720-12IKB, with antennas South Star part no 1109-02353 (Tx1) & 1109-02360 (Tx2).
Antenna is of same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.14W/kg and 1.53W/kg respectively.
This change is to request approval for portable category specific host notebook PC, Lenovo model number : Lenovo Yoga 720-12IKB, with antennas South Star part no 1109-02353 (Tx1) & 1109-02360 (Tx2).
Antenna is of same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous
transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and
requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.03W/kg and 0.59W/kg respectively. The highest reported Extremity and Simultaneous SAR values are 1.46W/kg and 3.85W/kg respectively.
This change is to request approval for portable category specific host PC, HP model: TPC-Q036-BP PC with WNC antennas part number DQ6415GBC00 (81EAA415.GBC) (Main) & DQ6415GBD00 (81EAA415.GBD) (Aux) and Inpaq DQ60PLB0113 (WAPLB01183) (Main) & DQ60PLB0239 (WAPLB02438) (Aux).
Antenna is of same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM
integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and
requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.98W/kg and 1.47W/kg respectively.
This change is to request approval for portable category specific host notebook PC, Lenovo model number : Lenovo Idea Pad Yoga 920, with antennas Honglin part no 260-28133-01 (Tx1) & 260-28133-02 (Tx2).
Antenna is of same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.33W/kg and 1.47W/kg respectively.
This change is to request approval for portable category specific host notebook PC, Lenovo model number : Lenovo Idea Pad Yoga 920, with antennas Honglin part no 260-28133-01 (Tx1) & 260-28133-02 (Tx2).
Antenna is of same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for
each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.32W/kg and 1.47W/kg respectively.
This change is to request approval for portable category specific host notebook PC, Lenovo model number : Lenovo Idea Pad Yoga 920, with antennas Honglin part no 260-28133-01 (Tx1) & 260-28133-02 (Tx2).
Antenna is of same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM
integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy
RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.31W/kg and 1.48W/kg respectively.
This change is to request approval for portable category specific host notebook PC, Lenovo model number - Lenovo N24 with antennas South Star part no D04-0282-R0A (Tx1) & D04-0281-R0A (Tx2).
Antenna is of same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.04W/kg and 1.48W/kg respectively.
This change is to request approval for portable category specific host notebook PC, Lenovo model number - Lenovo N24 with antennas South Star part no D04-0282-R0A (Tx1) & D04-0281-R0A (Tx2).
Antenna is of same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM
integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and
requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.97W/kg and 1.48W/kg respectively.
This change is to request approval for portable category specific host notebook PC, Lenovo model number - Lenovo N24 with antennas South Star part no D04-0282-R0A (Tx1) & D04-0281-R0A (Tx2).
Antenna is of same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM
integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy
RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.20W/kg and 1.47W/kg respectively.
This change is to request approval for portable category specific host notebook PC, Lenovo model - V720-14 PC with Tongda antennas part number T-543-9021129-1 (Main & Aux) and HighTek 0ACCN016029N (Main & Aux).
Antenna is of same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM
integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and
requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.39W/kg and 1.47W/kg respectively.
This change is to request approval for portable category specific host notebook PC, Lenovo model - V720-14 PC with Tongda antennas part number T-543-9021129-1 (Main & Aux) and HighTek 0ACCN016029N (Main & Aux).
Antenna is of same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.06W/kg and 1.47W/kg respectively.
This change is to request approval for portable category specific host notebook PC, Lenovo model - V720-14 PC with Tongda antennas part number T-543-9021129-1 (Main & Aux) and HighTek 0ACCN016029N (Main & Aux).
Antenna is of same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter
product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance,
including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating
compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host
integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product.
Addition of a new antenna type, slot antenna antenna, which is different than the original application. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter
product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance.
Addition of a new antenna type, slot antenna antenna, which is different than the original application. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be
met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product.
Addition of a new antenna type, slot antenna antenna, which is different than the original application. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures.
Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.16W/kg and 1.51W/kg respectively.
This change is to request approval for portable category specific host notebook PC, Lenovo model number - Lenovo ideapad 720S-13IKB, with antennas Amphenol part no AM149000C10 (Tx1 & Tx2) and Luxshare part no AM149000C00 (Tx1 & Tx2).
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product
procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application,
containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are1.23W/kg and
1.51W/kg respectively.
This change is to request approval for portable category specific host notebook PC, Lenovo model number - Lenovo ideapad 720S-13IKB, with antennas Amphenol part no AM149000C10 (Tx1 & Tx2) and Luxshare part no AM149000C00 (Tx1 & Tx2).
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application,
containing appropriate data demonstrating compliance, or a new application. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.35W/kg and 1.51W/kg respectively.
This change is to request approval for portable category specific host notebook PC, Lenovo model number - Lenovo ideapad 720S-13IKB, with antennas Amphenol part no AM149000C10 (Tx1 & Tx2) and Luxshare part no AM149000C00 (Tx1 & Tx2).
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine
applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.18W/kg and 1.14W/kg respectively.
This change is to request approval for portable category specific host notebook PC, Lenovo model number Lenovo ideapad 720-15IKB, with antennas Hightek part no 025.9013U.0011 (Tx1) & 025.9013V.0011 (Tx2) and WNC part no 025.9013U.0001 (Tx1) & 025.9013V.0001 (Tx2).
Antenna is of same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The
highest reported Body and Simultaneous SAR values are 0.03W/kg and 1.14W/kg respectively.
This change is to request approval for portable category specific host notebook PC, Lenovo model number Lenovo ideapad 720-15IKB, with antennas Hightek part no 025.9013U.0011 (Tx1) & 025.9013V.0011 (Tx2) and WNC part no 025.9013U.0001 (Tx1) & 025.9013V.0001 (Tx2).
Antenna is of same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine
applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device
containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.24W/kg and 1.14W/kg respectively.
This change is to request approval for portable category specific host notebook PC, Lenovo model number Lenovo ideapad 720-15IKB, with antennas Hightek part no 025.9013U.0011 (Tx1) & 025.9013V.0011 (Tx2) and WNC part no 025.9013U.0001 (Tx1) & 025.9013V.0001 (Tx2).
Antenna is of same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine
applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device
containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.49W/kg and 1.36W/kg respectively.
This change is to request approval for portable category specific host notebook PC, Lenovo model number : Lenovo ideapad 520S-14IKB, with antennas Hightek part no 0ACCN016025N (Tx1) & 0ACCN016026N (Tx2) and Tongda part no T-543-9021127-1 (Tx1) & T-543-9021127-2 (Tx2).
Antenna is of same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The
highest reported Body and Simultaneous SAR values are 0.09W/kg and 1.36W/kg respectively.
This change is to request approval for portable category specific host notebook PC, Lenovo model number : Lenovo ideapad 520S-14IKB, with antennas Hightek part no 0ACCN016025N (Tx1) & 0ACCN016026N (Tx2) and Tongda part no T-543-9021127-1 (Tx1) & T-543-9021127-2 (Tx2).
Antenna is of same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine
applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.27W/kg and 1.36W/kg respectively.
This change is to request approval for portable category specific host notebook PC, Lenovo model number : Lenovo ideapad 520S-14IKB, with antennas Hightek part no 0ACCN016025N (Tx1) & 0ACCN016026N (Tx2) and Tongda part no T-543-9021127-1 (Tx1) & T-543-9021127-2 (Tx2).
Antenna is of same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.04W/kg and 1.44W/kg respectively.
This change is to request approval for portable category specific host tablet PC, Lenovo model number: Lenovo ideapad 720S-14IKB, with antenna HighTek part no 0ACCN016017N (Tx1) & 0ACCN016018N (Tx2) and Tongda part no T-543-9021130-1 (Tx1) & T-543-9021130-2 (Tx2).
Antenna is of same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine
applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.30W/kg and 1.44W/kg respectively.
This change is to request approval for portable category specific host tablet PC, Lenovo model number: Lenovo ideapad 720S-14IKB, with antenna HighTek part no 0ACCN016017N (Tx1) & 0ACCN016018N (Tx2) and Tongda part no T-543-9021130-1 (Tx1) & T-543-9021130-2 (Tx2).
Antenna is of same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine
applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device
containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate
into a host product. The highest reported Body and Simultaneous SAR values are 0.93W/kg and 1.44W/kg respectively.
This change is to request approval for portable category specific host tablet PC, Lenovo model number: Lenovo ideapad 720S-14IKB, with antenna HighTek part no 0ACCN016017N (Tx1) & 0ACCN016018N (Tx2) and Tongda part no T-543-9021130-1 (Tx1) & T-543-9021130-2 (Tx2).
Antenna is of same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine
applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.22W/kg and 1.55W/kg respectively.
This change is to request approval for portable category specific host notebook PC, HP model number HSN-C02C, with antennas Acon part no APP6Y-700010 (Tx1 & Tx2), WNC part no 81EAAR15.GEC (Tx1 & Tx2) and Yageo part no ANTA0HC09592WLAN1 (Tx1 & Tx2).
Antenna is of same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine
applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device
containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.80W/kg and 1.55W/kg respectively.
This change is to request approval for portable category specific host notebook PC, HP model number HSN-C02C, with antennas Acon part no APP6Y-700010 (Tx1 & Tx2), WNC part no 81EAAR15.GEC (Tx1 & Tx2) and Yageo part no ANTA0HC09592WLAN1 (Tx1 & Tx2).
Antenna is of same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.11W/kg and 1.55W/kg respectively.
This change is to request approval for portable category specific host notebook PC, HP model number HSN-C02C, with antennas Acon part no APP6Y-700010 (Tx1 & Tx2), WNC part no 81EAAR15.GEC (Tx1 & Tx2) and Yageo part no ANTA0HC09592WLAN1 (Tx1 & Tx2).
Antenna is of same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine
applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device
containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.76W/kg and 1.51W/kg respectively.
This change is to request approval for portable category specific host notebook PC, Lenovo model number - Lenovo Yoga 720-15IKB, with antennas Acon part no AML6Y-100014 (Tx1) & AMLY6Y-100017 (Tx2) and HongBo part no 260-28130 (Tx1) & 260-28129 (Tx2).
Antenna is of same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine
applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.12W/kg and 1.51W/kg respectively.
This change is to request approval for portable category specific host notebook PC, Lenovo model number - Lenovo Yoga 720-15IKB, with antennas Acon part no AML6Y-100014 (Tx1) & AMLY6Y-100017 (Tx2) and HongBo part no 260-28130 (Tx1) & 260-28129 (Tx2).
Antenna is of same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.15W/kg and 1.51W/kg respectively.
This change is to request approval for portable category specific host notebook PC, Lenovo model number - Lenovo Yoga 720-15IKB, with antennas Acon part no AML6Y-100014 (Tx1) & AMLY6Y-100017 (Tx2) and HongBo part no 260-28130 (Tx1) & 260-28129 (Tx2).
Antenna is of same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine
applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device
containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.16W/kg and 1.55W/kg respectively.
This change is to request approval for portable category specific host notebook PC, Lenovo model number : Lenovo Yoga 720-13IKB, with antennas Acon part no AML6Y-100014 (Tx1) & AMLY6Y-100017 (Tx2) and HongBo part no 260-28130 (Tx1) & 260-28129 (Tx2).
Antenna is of same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine
applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.31W/kg and 1.55W/kg respectively.
This change is to request approval for portable category specific host notebook PC, Lenovo model number : Lenovo Yoga 720-13IKB, with antennas Acon part no AML6Y-100014 (Tx1) & AMLY6Y-100017 (Tx2) and HongBo part no 260-28130 (Tx1) & 260-28129 (Tx2).
Antenna is of same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.24W/kg and 1.55W/kg respectively.
This change is to request approval for portable category specific host notebook PC, Lenovo model number : Lenovo Yoga 720-13IKB, with antennas Acon part no AML6Y-100014 (Tx1) & AMLY6Y-100017 (Tx2) and HongBo part no 260-28130 (Tx1) & 260-28129 (Tx2).
Antenna is of same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine
applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Highest reported Body SAR value is 1.57 W/kg and Simultaneous SAR meets with the 0.04 separation ratio requirements.
This change establishes portable category SAR conditions for the host platform and antennas listed below. Lenovo model: TP00078B PC with Hua Cheng antennas part numbers DC33001W000 (Main) and DC33001W010 (Aux) and Pulse antennas part numbers DC330020100 (Main) and DC330020110 (Aux).
Antenna is of same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures.
Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Highest reported Body SAR value is 0.15 W/kg and Simultaneous SAR meets with the 0.04 separation ratio requirements.
This change establishes portable category SAR conditions for the host platform and antennas listed below. Lenovo model: TP00078B PC with Hua Cheng antennas part numbers DC33001W000 (Main) and DC33001W010 (Aux) and Pulse antennas part
numbers DC330020100 (Main) and DC330020110 (Aux).
Antenna is of same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine
applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device
containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Highest reported Body SAR value is 0.79 W/kg and Simultaneous SAR meets with the 0.04 separation ratio requirements.
This change establishes portable category SAR conditions for the host platform and antennas listed below. Lenovo model: TP00078B PC with Hua Cheng antennas part numbers DC33001W000 (Main) and DC33001W010 (Aux) and Pulse antennas part numbers DC330020100 (Main) and DC330020110 (Aux).
Antenna is of same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Highest reported Body SAR value is 0.02 W/kg and Simultaneous SAR meets with the 0.04 separation ratio requirements.
This change establishes portable category SAR conditions for the host platform and antennas listed below. Lenovo model: TP00080B PC with Tongda antennas part numbers
DC33001RN00 (Main) and DC33001RN10 (Aux).
Antenna is of same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine
applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device
containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Highest reported Body SAR value is 0.31 W/kg and Simultaneous SAR meets with the 0.04 separation ratio requirements.
This change establishes portable category SAR conditions for the host platform and antennas listed below. Lenovo model: TP00080B PC with Tongda antennas part numbers DC33001RN00 (Main) and DC33001RN10 (Aux).
Antenna is of same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine
applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Highest reported Body SAR value is 1.22 W/kg and Simultaneous SAR meets with the 0.04 separation ratio requirements.
This change establishes portable category SAR conditions for the host platform and antennas listed below. Lenovo model: TP00080B PC with Tongda antennas part numbers DC33001RN00 (Main) and DC33001RN10 (Aux).
Antenna is of same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous
transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Highest reported Body SAR value is 0.73 W/kg and Simultaneous SAR meets with the 0.04 separation ratio requirements.
This change establishes portable category SAR conditions for the host platform and antennas listed below. HP model: HSN-I07C PC with Inpaq antennas part numbers WA-P-LB-02-375 and WA-P-LB-02-376.
Antenna is of same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine
applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Highest reported Body SAR value is 1.20 W/kg and Simultaneous SAR meets with the 0.04 separation ratio requirements.
This change establishes portable category SAR conditions for the host platform and antennas listed below. HP model: HSN-I07C PC with Inpaq antennas part numbers WA-P-LB-02-375 and WA-P-LB-02-376.
Antenna is of same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Highest reported Body SAR value is 0.29 W/kg and Simultaneous SAR meets with the 0.04 separation ratio requirements.
This change establishes portable category SAR conditions for the host platform and antennas listed below. HP model: HSN-I07C PC with Inpaq antennas part numbers WA-P-LB-02-375 and WA-P-LB-02-376.
Antenna is of same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.50W/kg and 1.58W/kg respectively.
This change is to request approval for portable category specific host notebook PC, Lenovo model number : Lenovo ideapad MIIX 510-12IKB, with antennas South Star (Tx1) & (Tx2).
Antenna is of same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous
transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy
RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.12W/kg and 1.58W/kg respectively.
This change is to request approval for portable category specific host notebook PC, Lenovo model number : Lenovo ideapad MIIX 510-12IKB, with antennas South Star (Tx1) & (Tx2).
Antenna is of same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine
applicable host configurations to ensure RF exposure compliance, including simultaneous
transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the
instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.14W/kg and 1.58W/kg respectively.
This change is to request approval for portable category specific host notebook PC, Lenovo model number : Lenovo ideapad MIIX 510-12IKB, with antennas South Star (Tx1) & (Tx2).
Antenna is of same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application,
containing appropriate data demonstrating compliance, or a new application. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.53W/kg and 1.53W/kg respectively.
This change establishes portable category SAR conditions for the host platform and antennas listed below in a Lenovo model: TP00076C.
WNC (PIFA) Main, Jiengtai (PIFA) Main, Luxshare (PIFA) Main, Hightek (PIFA) Main |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.40W/kg and 1.53W/kg respectively.
This change establishes portable category SAR conditions for the host platform and antennas listed below in a Lenovo model: TP00076C.
WNC (PIFA) Main, Jiengtai (PIFA) Main, Luxshare (PIFA) Main, Hightek (PIFA) Main |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter
product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous
transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.62W/kg and 1.53W/kg respectively.
This change establishes portable category SAR conditions for the host platform and antennas listed below in a Lenovo model: TP00076C.
WNC (PIFA) Main, Jiengtai (PIFA) Main, Luxshare (PIFA) Main, Hightek (PIFA) Main |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine
applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This filing meets the requirements of KDB447498 and can be used in mobile configurations.
Change is for the addition of new dipole type antenna. This antenna will be restricted to mobile category computers and stationary desktop computers. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine
applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This filing meets the requirements of KDB447498 and can be used in mobile configurations.
Change is for the addition of new dipole type antenna. This antenna will be restricted to mobile category computers and stationary desktop computers. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. This filing meets the requirements of KDB447498 and can be used in mobile configurations.
Change is for the addition of new dipole type antenna. This antenna will be restricted to mobile category computers and stationary desktop computers. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine
applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.21W/kg and 1.53W/kg respectively.
This change is to request additional Chassis added, model number HP model TPN-Q178, Antennas WNC PIFA type Main (Tx1) 81EAA415.G75 and Aux (Tx2) 81EAA415.G75.
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine
applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.44W/kg and 1.53W/kg respectively.
This change is to request additional Chassis added, model number HP model TPN-Q178, Antennas WNC PIFA type Main (Tx1) 81EAA415.G75 and Aux (Tx2) 81EAA415.G75.
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.12W/kg and 1.53W/kg respectively.
This change is to request additional Chassis added, model number HP model TPN-Q178,
Antennas WNC PIFA type Main (Tx1) 81EAA415.G75 and Aux (Tx2) 81EAA415.G75.
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s)
with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements
according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device enabled for 2.4 GHz band operations and also has 20MHz, 40MHz and 80MHz bandwidth modes as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.19W/kg and 0.90W/kg respectively.
This change is to request approval for portable category specific host tablet PC, Lenovo model number: Lenovo MIIX 720-12IKB, with antenna Amphenol part no DC33001FX00 (Tx1) & DC33001FX10 (Tx2) and Speedwire part no DC33001FS00 (Tx1) & DC33001FS10 (Tx2).
Antenna is of same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s)
with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements
according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a client only device enabled for 5GHz band operations and also has 20MHz, 40MHz and 80MHz bandwidth modes as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.27W/kg and 0.90W/kg
respectively.
This change is to request approval for portable category specific host tablet PC, Lenovo model number: Lenovo MIIX 720-12IKB, with antenna Amphenol part no DC33001FX00 (Tx1) & DC33001FX10 (Tx2) and Speedwire part no DC33001FS00 (Tx1) & DC33001FS10 (Tx2).
Antenna is of same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.63W/kg and 0.90W/kg respectively.
This change is to request approval for portable category specific host tablet PC, Lenovo model number: Lenovo MIIX 720-12IKB, with antenna Amphenol part no DC33001FX00 (Tx1) & DC33001FX10 (Tx2) and Speedwire part no DC33001FS00 (Tx1) & DC33001FS10 (Tx2).
Antenna is of same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.09W/kg and 0.96W/kg respectively.
This change is to request additional Chassis added, model number: Toshiba X20W-D Series, with the following antennas: Speed Part No. F-0G-V1-0171(TX1)
and F-0G-V1-070 (TX2).
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures.
Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s)
with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements
according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device enabled for 2.4 GHz band operations and also has 20MHz, 40MHz and 80MHz bandwidth modes as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.23W/kg and 0.96W/kg respectively.
This change is to request additional Chassis added, model number: Toshiba X20W-D Series, with the following antennas: Speed Part No. F-0G-V1-0171(TX1) and F-0G-V1-070 (TX2).
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s)
with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements
according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing
appropriate data demonstrating compliance, or a new application. Device is a client only device enabled for 5GHz band operations and also has 20MHz, 40MHz and 80MHz bandwidth modes as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.65W/kg and 0.96W/kg respectively.
This change is to request additional Chassis added, model number: Toshiba X20W-D Series, with the following antennas: Speed Part No. F-0G-V1-0171(TX1) and F-0G-V1-070 (TX2).
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter
product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance,
including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating
compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device enabled for 2.4 GHz band operations and also has 20MHz, 40MHz and 80MHz bandwidth modes as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.62W/kg and 1.36W/kg respectively.
This change is to request approval for portable category specific host notebook PC, Lenovo model number : Lenovo ideapad 710S-13IKB, with antennas HighTek part no 025.900G0.0011 (Tx1) & 025.900G1.0011 (Tx2) and WNC part no 025.900G0.0011 (Tx1) & 025.900G1.0011 (Tx2).
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.07W/kg and 1.36W/kg respectively.
This change is to request approval for portable category specific host notebook PC, Lenovo model number : Lenovo ideapad 710S-13IKB, with antennas HighTek part no 025.900G0.0011 (Tx1) & 025.900G1.0011 (Tx2) and WNC part no 025.900G0.0011 (Tx1) & 025.900G1.0011 (Tx2).
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s)
with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements
according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a client only device enabled for 5GHz band operations and also has 20MHz, 40MHz and 80MHz bandwidth modes as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.29W/kg and 1.36W/kg
respectively.
This change is to request approval for portable category specific host notebook PC, Lenovo model number : Lenovo ideapad 710S-13IKB, with antennas HighTek part no 025.900G0.0011 (Tx1) & 025.900G1.0011 (Tx2) and WNC part no 025.900G0.0011 (Tx1) & 025.900G1.0011 (Tx2).
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter
product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device enabled for 2.4 GHz band operations and also has 20MHz, 40MHz and 80MHz bandwidth modes as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.63W/kg and 1.43W/kg respectively.
This change is to request approval for portable category specific host tablet PC, HP model number: TPN-Q179, with antenna Inpaq part no WA-P-LBLB-02-018 (Tx1 & Tx2) and WNC part no 81EAA415.G27 (Tx1 & Tx2).
Antenna is of same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter
product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a client only device enabled for 5GHz band operations and also has 20MHz, 40MHz and 80MHz bandwidth modes as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions
and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.32W/kg and 1.43W/kg respectively.
This change is to request approval for portable category specific host tablet PC, HP model number: TPN-Q179, with antenna Inpaq part no WA-P-LBLB-02-018 (Tx1 & Tx2) and WNC part no 81EAA415.G27 (Tx1 & Tx2).
Antenna is of same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.11W/kg and 1.43W/kg respectively.
This change is to request approval for portable category specific host tablet PC, HP model number: TPN-Q179, with antenna Inpaq part no WA-P-LBLB-02-018 (Tx1 & Tx2) and WNC part no 81EAA415.G27 (Tx1 & Tx2).
Antenna is of same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.21W/kg and 1.46W/kg respectively.
This change is to request approval for portable category specific host notebook PC, HP model number : TPN-Q178, with antennas Inpaq part no WA-PLBLB-02-014 (Tx1 & Tx2) and WNC part no 81EAA415.G23 (Tx1 & Tx2).
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter
product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device enabled for 2.4 GHz band operations and also has 20MHz, 40MHz and 80MHz bandwidth modes as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product.
The highest reported SAR values are Body and Simultaneous SAR are 1.16W/kg and 1.46W/kg respectively.
This change is to request approval for portable category specific host notebook PC, HP model number : TPN-Q178, with antennas Inpaq part no WA-PLBLB-02-014 (Tx1 & Tx2) and WNC part no 81EAA415.G23 (Tx1 & Tx2).
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter
product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a client only device enabled for 5GHz band operations and also has 20MHz, 40MHz and 80MHz bandwidth modes as described in this filing. OEM/Host integrator must be provided with antenna installation
instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.39W/kg and 1.46W/kg respectively.
This change is to request approval for portable category specific host notebook PC, HP model number : TPN-Q178, with antennas Inpaq part no WA-PLBLB-02-014 (Tx1 & Tx2) and WNC part no 81EAA415.G23 (Tx1 & Tx2).
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.22W/kg and 1.53W/kg respectively.
This change to establish conditions based on modular stand-alone SAR evaluation to establish minimum 8mm antenna to user separation distance at a maximum SAR value <0.8W/kg(1g) for mixed mobile/portable conditions according to KDB 447498 D01 General RF Exposure Guidance v05 and KDB 616217 D04 for Laptop and Tablets v01. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must
provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data
demonstrating compliance, or a new application. Device is a client only device enabled for 5GHz band operations and also has 20MHz, 40MHz and 80MHz bandwidth modes as described in this filing. OEM/Host integrator must be provided with antenna
installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host
product. The highest reported Body and Simultaneous SAR values are 0.79W/kg and 1.53W/kg respectively.
This change to establish conditions based on modular stand-alone SAR evaluation to establish minimum 8mm antenna to user separation distance at a maximum SAR value <0.8W/kg(1g) for mixed mobile/portable conditions according to KDB 447498 D01 General RF Exposure Guidance v05 and KDB 616217 D04 for Laptop and Tablets v01. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must
provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data
demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device enabled for 2.4 GHz
band operations and also has 20MHz, 40MHz and 80MHz bandwidth modes as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported SAR values are Body and Simultaneous SAR are 0.79W/kg and 1.53W/kg respectively.
This change to establish conditions based on modular stand-alone SAR evaluation to establish minimum 8mm antenna to user separation distance at a maximum SAR value <0.8W/kg(1g) for mixed mobile/portable conditions according to KDB 447498 D01 General RF Exposure Guidance v05 and KDB 616217 D04 for Laptop and Tablets v01. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must
provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data
demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device enabled for 2.4 GHz
band operations and also has 20MHz, 40MHz and 80MHz bandwidth modes as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported SAR values are Body and Simultaneous SAR are 0.46W/kg and 0.91W/kg respectively. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must
provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data
demonstrating compliance, or a new application. Device is a client only device enabled for 5GHz band operations and also has 20MHz, 40MHz and 80MHz bandwidth modes as described in this filing. OEM/Host integrator must be provided with antenna
installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host
product. The highest reported Body and Simultaneous SAR values are 0.75W/kg and 1.44W/kg respectively. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.05W/kg and 0.78W/kg respectively. |
various | Is there an equipment authorization waiver associated with this application? | No |
various | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No |
|
app
s
|
Test Firm Name and Contact Information
|
various
|
Firm Name |
Intel Corporation S.A.S.
|
various
|
Intel Mobile Commmunications France S.A.S.
|
various
|
DEKRA TESTING AND CERTIFICATION CO., LTD. LinKou
|
various
|
Name |
N****** A********
|
various
|
N****** A****
|
various
|
S******** H********
|
various
|
Telephone Number |
00334********
|
various
|
00334********
|
various
|
+886-******** Extension:
|
various
|
Fax Number |
00334********
|
various
|
+886-********
|
various
|
E-mail |
n******@intel.com
|
various
|
s******@dekra.com
|
|