1Check the package contents Unpack the Bluetooth A/V Transmitter and check that the following items are included:
3Turn on the power To turn on the power, press and hold the power button until the power LED lights blue. To turn off the power, press and hold the power button until the power LED turns off. Power/link LED Bluetooth A/V Transmitter USB Cable Audio Cable Quick Guide Power Adapter 2Charge the battery The battery lasts eight hours and is re-
charged using the power adapter or the USB cable. To recharge:
Plug the USB cable into the DC jack on the Bluetooth A/V Transmitter and connect the other end to your PC. or Plug the power adapter into the DC jack on the Bluetooth A/V Transmitter and con-
nect the other end to an electrical outlet. Recharging takes 90 minutes. Power button Power button DC jack Charge status LED Audio in Blue LED power is on Blue ashing LED connected to device Red LED battery is charging, turns off when charged Red ashing LED battery is low, recharge before LED turns off 4Pair (make connection) with receiver The Bluetooth A/V Transmitter can be used with a bluetooth headset or receiver. On rst use, the devices must be paired. To pair the devices. 1. Connect the audio cable to the audio in jack on the Bluetooth A/V Transmitter. 2. Connect the other end to the audio out jack on your MP3 player. 5Connecting with a receiver (cont.) 3. Turn on the power on your headset. 4. Turn on the power on the Bluetooth A/V Transmitter. 6Wait for devices to connect The devices connect (pair) after 90 seconds. 90 seconds 7Using other devices The Bluetooth A/V Transmitter can be used with the following devices:
Headsets Receivers/speakers Troubleshooting If the Bluetooth A/V Transmitter does not work, try the following:
- Ensure connecting devices are charged
- Turn off all devices and then turn them on in the order shown in this guide
- Ensure devices are within the 10-meter range
8Speci cations Standards Frequency Band Tx Power Rx Sensitivity Distance Audio Connector Audio Streaming Format Audio Frequency Range Audio S/N Audio THD Audio Output Power Battery Life 500mA Power supply Physical Speci cation:
Environmental Range:
Bluetooth speci cation V1.2 compliant. Bluetooth A2DP pro le (AV Pro le) 2402 ~ 2480 MHz 0.25 ~ 2.5mW (Bluetooth Power Class II)
< -80dBm (BER 0.1%)
> 10m (open space) Audio Stereo jack 3.5 mm SBC 48.000 kHz 20Hz ~ 22 kHz
> 85dB
< -83dB
> 20mWrms Music play : > 8 hrs. Supply by integrated Polymer rechargeable battery Operation >8hrs. 75 mm (H) x 26 mm (W) x 14.5 mm (D) Operating temperature:-10 ~ +50 degrees centigrade Humidity: Relative humidity 0 ~ 95%
Serial number & Firmware version:
Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. IMPORTANT NOTE:
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific operating instructions for satisfying RF exposure compliance. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.