UTk PLD Fos %
Fenty: MOvretkem 10/193 Fast Ethernet PC Cara Network Adapter Users Guide FCC REGULATORY STATEMENTS ~TE 2009 -FO2%
Part15, Class B This device complies with Part 15 of FCC rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interface, and 2. This device must accept any interface received, including interface that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. e Increase the distance between the equipment and receiver. e Connect the equipment into an outlet on a circuit on different from that to which the recciver is connected. d Changes or modifications not expressly approved Ly party responsible for compliance could void the user the user authority to operate the equipment. INTRODUCTION This 10/100 Fast Ethernet PC Card Network Adapter 1s designed for any Notebook PC with a PCMCIA or CardBus PC Card slot. With this PC Card, users can hook up to their Ethernet LANs at the speed of 100Mbps which is 10 times faster then traditional LAN environment. Moreover, the support of full duplex mode makes the data rate double possible. The fantastic feature of 10/100M auto-negotiation cleans away the backwards compatible troubles. The 10/100 Fast Ethernet PC Card Network Adapter is Microsoft Plug and Play compatible. The installation under Windows 95/98/2000/NT can be easily done in minutes. The included NOS drivers ensure the compatibility to the widely used networking environments, such as Novell Netware, Microsoft LAN Manager, TCP/IP and more. The wide range Card and Socket Services (CSS) compatibility also makes the users trouble-free for their Intranet connection. The 10/100 Fast Ethernet PC Card Network Adapter is simple to use, providing automatic installation, and no external power 1s required. SYSTEM REQUIREMENTS e An IBM compatible notebook computer with 3862 < or higher processor Atleast one Type II PC Card socket Drivers and utilities provided with this product e PCMCIA release 2.1 compliant Card Services and Socket Services. OPERATING ENVIORNMENTS Novell Netware 3.x/4.x Microsoft LAN Manager Packet Driver Applications Microsoft Windows for Workgroups 3.11 Microsoft Windows 3.1 Microsoft Windows NT 3.51, NT 4.0 Windows 95 Windows 98 Windows 2000 Lantastic 6.0 IBM OS/2 Warp Version 3 HARDWARE INSTALLATION 1. Locate the PCMCIA slot of your system. 2. Align the Dual_Speed-
10/100 Port_Attached_PC_Card toward the PCMCIA slot. Push evenly and steadily until it is seated. Notebook 3. Connect the other end of the PC Card cable to the telephone line outlet. 4. You are now ready to continue the software installation. APPENDIX A. SPECIFICATIONS Network Interface Specifications JEFE 802.3 for 10BaseT JEEE 802.3u for 100BaseTX Data Rate
" 10/100 Mbps, Double data rate in Full Duplex mode Operating Systems For Notebook PC: ( with accessory adapter) Novell Netware 3.x, 4.x
"Microsoft LAN Manager
-~* Packet Driver Applications Microsoft Windows for Workgroups 3.11
# Windows 3.1 a Microsoft Windows NT 3.51, NT 4.0
# Windows 95/98 Windows 2000 ready Power Requirements Normal Operation: +5V DC, 300mA max General Specification LEDs: Six LEDs on the Direct Port a Link (Green, On)
# 100/10 (Orange, On)
= Full (Green, On)
-24-
# RX (Green, Blink) COL (Orange, On) TX (Green, Blink) Environments Ranges Operating: 32F to 149F (0C to 65C) Storage: -4F to 158F (O0C to 70C) Humidity: 10% - 90% , noncondensing Certifications FCC, Part 15, Class B, VCCI-B CE Mark (EN55022,ClassB, EN50082-1)
-25-