Project/Product/Process
Author
Project/product and doc ID
Pages
Publish Date
Project: 1032
Salah Alazawi
103250101
11
2020-10-05
Title
Distribution
Document Class
Template Rev
Revision & Status
User Manual
Actia Group
VC - Version
Controlled
1.1
1 .2
Released
103250101
User Manual
Copyright © 2018 ACTIA NORDIC AB
ACTIA Nordic AB SWEDEN info@actia.se www.actia.se
Title
User Manual
Revision & Status
Doc Id
Distribution
Page (No Pages)
Rev 1.2 Released 1032-[Subject] Actia Group
2 (11)
1 CONTENTS
2
Introduction ................................................................................................................................................. 3
2.1
Revision history ..................................................................................................................................3
2.2
Abbreviations......................................................................................................................................3
2.3
References ..........................................................................................................................................3
3 Overview ...................................................................................................................................................... 4
3.1
Connectors..........................................................................................................................................4
3.1.1
8-pin MQS connector................................................................................................................... 4
3.1.2
GNSS Antenna .............................................................................................................................. 4
3.1.3
Cellular Antenna .......................................................................................................................... 4
3.1.4
6-pin MQS connector................................................................................................................... 4
3.2
Power Supply ......................................................................................................................................5
3.3
SIM interface ......................................................................................................................................5
3.4
External antenna ................................................................................................................................5
3.5
RF parameters ....................................................................................................................................5
3.5.1
Supported bands and output power ........................................................................................... 5
3.6
GNSS ...................................................................................................................................................6
3.6.1
Supported bands ......................................................................................................................... 6
4 Mechanical design ....................................................................................................................................... 7
Functional Description ................................................................................................................................. 8
Installation and maintenance ...................................................................................................................... 9
6.1
Installation ..........................................................................................................................................9
6.2 Maintenance .......................................................................................................................................9
7
Regulatory Certifications ........................................................................................................................... 10
7.1
USA (FCC) ......................................................................................................................................... 10
7.1.1
FCC Warnings and Notices ......................................................................................................... 10
7.1.2
OEM Requirements ................................................................................................................... 11
5
6
COPYRIGHT © 2018 ACTIA NORDIC AB
ACTIA Nordic AB SWEDEN info@actia.se www.actia.se
Title
User Manual
Revision & Status
Doc Id
Distribution
Page (No Pages)
Rev 1.2 Released 1032-[Subject] Actia Group
3 (11)
This document describes how to set up the 103250101 for certification testing.
2 INTRODUCTION
2.1 REVISION HISTORY
Revision
Date
1.0
1.1
Author(s)
Cause of changes
Updates
2018-11-28
Salah Alazawi
Release
First release
2019-09-26
Salah Alazawi
LTE bands
correction, safety
warning added
Second
release
2.2 ABBREVIATIONS
Abbreviation Meaning
GNSS
QZSS
OTA
CAN
Global Navigation Satellite System
Quasi-Zenith Satellite System
Over The Air
Controller Area Network
2.3 REFERENCES
Title
Reference
Doc. number
Revision
COPYRIGHT © 2018 ACTIA NORDIC AB
ACTIA Nordic AB SWEDEN info@actia.se www.actia.se
Title
User Manual
Revision & Status
Doc Id
Distribution
Page (No Pages)
Rev 1.2 Released 1032-[Subject] Actia Group
4 (11)
3 OVERVIEW
3.1 CONNECTORS
Following connectors are available on the 103250101:
Figure 1 103250101 connectors
103250101 has four external connectors:
1. 8-pin connector Power supply, CAN and I/O.
2. Blue FAKRA Antenna connection for GNSS antenna.
3. Violet FAKRA Antenna connection for main LTE antenna.
4. 6-pin connector Analog inputs. Also test interface is available after modification of unit.
3.1.1 8-pin MQS connector
This connector is used for power supply, CAN bus, input- and output signals.
3.1.2 GNSS Antenna
The blue FAKRA connector is input for GNSS antenna.
3.1.3 Cellular Antenna
The violet FAKRA is the main antenna interface for 2G/3G/4G communication.
3.1.4 6-pin MQS connector
This connector is used for input signals.
COPYRIGHT © 2018 ACTIA NORDIC AB
ACTIA Nordic AB SWEDEN info@actia.se www.actia.se
Title
User Manual
Revision & Status
Doc Id
Distribution
Page (No Pages)
Rev 1.2 Released 1032-[Subject] Actia Group
5 (11)
3.2 POWER SUPPLY
The 103250101 is designed to be powered by an external vehicle battery. Nominal supply voltages are 12,
24, 36, 48 V (depending on vehicle). The power supply range is 8-60V.
3.3 SIM INTERFACE
The embedded modem can use an embedded SIM chip as a SIM source.
3.4 EXTERNAL ANTENNA
103250101 is certified to be used with an external roof mounted antenna.
3.5 RF PARAMETERS
Supported bands and output power
3.5.1
Mode
Band
Frequency (MHz)
Max. Tx
power(dBm)
GSM/GPRS/EDGE
850
900
1800
1900
Rx
869 – 894
925 – 960
Tx
824 – 849
+33
880 – 915
1805 – 1880
1710 – 1785
+30
1930 – 1990
1850 – 1910
WCDMA/HSPA
I (2100)
2110 – 2170
1920 –1980
+24
LTE FDD
Bd 1 (2100)
2110 – 2170
1920 – 1980
+23
II (1900)
1930 – 1990
1850 – 1910
IV (AWS)
2110 – 2155
1710 – 1755
V (850)
869 – 894
VIII (900)
925 – 960
824 – 849
880 – 915
IX (1800)
1845 – 1880
1750 – 1785
XIX (800)
875 – 890
830 – 845
Bd 2 (1900)
1930 – 1990
1850 – 1910
Bd 3 (1800)
1805 – 1880
1710 – 1785
Bd 4 (AWS)
2110 – 2155
1710 – 1755
Bd 5 (850)
869-894
824-849
COPYRIGHT © 2018 ACTIA NORDIC AB
ACTIA Nordic AB SWEDEN info@actia.se www.actia.se
Title
User Manual
Revision & Status
Doc Id
Distribution
Page (No Pages)
Rev 1.2 Released 1032-[Subject] Actia Group
6 (11)
Bd 7 (2600)
2620 – 2690
2500 – 2570
Bd 8 (900)
925 – 960
Bd 12 (700)
729 – 746
Bd 18 (800)
860 – 875
Bd 20 (800)
791 – 821
Bd 28 (700)
758 – 803
880 – 915
699 – 716
815 – 830
832 – 862
703 – 748
Bd 19 (800)
875 – 890
830 – 845
3.6 GNSS
GNSS antenna input is the blue FAKRA connector.
Supported bands
3.6.1
Technology
GPS
GLONASS
Galileo
BeiDou (COMPAS)
QZSS
Bands
L1 FDMA
B1, B1-2
L1
E1
L1
COPYRIGHT © 2018 ACTIA NORDIC AB
ACTIA Nordic AB SWEDEN info@actia.se www.actia.se
Title
User Manual
Revision & Status
Doc Id
Distribution
Page (No Pages)
Rev 1.2 Released 1032-[Subject] Actia Group
7 (11)
4 MECHANICAL DESIGN
Figure 2 103250101 mechanical design
COPYRIGHT © 2018 ACTIA NORDIC AB
ACTIA Nordic AB SWEDEN info@actia.se www.actia.se
Title
User Manual
Revision & Status
Doc Id
Distribution
Page (No Pages)
Rev 1.2 Released 1032-[Subject] Actia Group
8 (11)
5 FUNCTIONAL DESCRIPTION
The following functions are available in the 103250101:
• Allow log on and start a working pass. In some cases, the driver will need to perform a Pre-Operational
check by answering questions that are handled by the 103250101 before starting the working pass.
• Gather information and send various reports from the truck including truck status, battery data, working
pass data, collision reports etc. to the manufacturer server.
• Send configurations to the 103250101 for setting of the various options.
• Send truck immobilize command.
• Retrieve diagnostic data using the TruckCom diagnostics tool.
• Update software over CAN or OTA.
• Gather GNSS data and get geofencing notifications.
• Report issues with the truck.
Immobilize the truck when it has received a shock (crash).
•
COPYRIGHT © 2018 ACTIA NORDIC AB
ACTIA Nordic AB SWEDEN info@actia.se www.actia.se
Title
User Manual
Revision & Status
Doc Id
Distribution
Page (No Pages)
Rev 1.2 Released 1032-[Subject] Actia Group
9 (11)
6 INSTALLATION AND MAINTENANCE
6.1 INSTALLATION
The product is factory fitted in trucks. It is not possible to buy this product separately.
Please be aware that the antenna must be installed to provide a separation distance of at least 20cm from all
persons.
6.2 MAINTENANCE
The status of the product can be read via diagnostic connections using special workshop tools. In addition,
other ECUs monitor the communication from the product and in case of missing/invalid communication, the
Central Electronic Module in the truck is alerted, and will display a warning to the driver.
Maintenance and replacement of the product can only be performed by certified workshops.
COPYRIGHT © 2018 ACTIA NORDIC AB
ACTIA Nordic AB SWEDEN info@actia.se www.actia.se
Title
User Manual
Revision & Status
Doc Id
Distribution
Page (No Pages)
Rev 1.2 Released 1032-[Subject] Actia Group
10 (11)
7 REGULATORY CERTIFICATIONS
7.1 USA (FCC)
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired
operation.
FCC Warnings and Notices
7.1.1
WARNING: The FCC requires the user to be notified that any changes or modifications made to this device
that are not expressly approved by Actia Nordic AB could void the user's authority to operate the
equipment.
RF EXPOSURE WARNING: This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with minimum distance 20 cm
between the radiator and your body. This transmitter must not be collocated or operating in conjunction
with any other antenna or transmitter.
NOTICE: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna. - Increase the separation between the equipment and
- Connect the equipment into an outlet on a circuit different from that to which the receiver is
- Consult the dealer or an experienced radio/TV technician for help.
receiver.
connected.
COPYRIGHT © 2018 ACTIA NORDIC AB
ACTIA Nordic AB SWEDEN info@actia.se www.actia.se
Title
User Manual
Revision & Status
Doc Id
Distribution
Page (No Pages)
Rev 1.2 Released 1032-[Subject] Actia Group
11 (11)
7.1.2 OEM Requirements
Following text should be printed in the user manual for vehicles in US:
Type Approval USA
FCC ID: 2AGKK103250101
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) (2) This device must accept any interference received, including interference that may cause
undesired operation.
WARNING: Changes or modifications not expressly approved by the party responsible for compliance could
void the user's authority to operate the equipment.
COPYRIGHT © 2018 ACTIA NORDIC AB
ACTIA Nordic AB SWEDEN info@actia.se www.actia.se