FCC ID: HS9-PP300V50SE Infrared microwave sensor

ModelDT8050A PROPOSED FCC ID LABEL AND LOCATION The label will be permanently affixed at a conspicuous location on the device. Bottom side:

ModelDT8050A-SN PROPOSED FCC ID LABEL AND LOCATION The label will be permanently affixed at a conspicuous location on the device. Bottom side:

Date: 10/11/2023 Federal Communications Commissions Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 RE: CFR 47 2.911 (d)(5) Attestation FCC ID: HS9-PP300V50SE 1. Ademco Inc. (the applicant) certifies that the equipment for which authorization is sought is not covered equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. 2. Ademco Inc. (the applicant) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing covered equipment and is not an affiliate or subsidiary of an entity identified on the Covered List. Sincerely yours, Name:

Christian Fouth Job Title:

Sr. Wireless Certification Engineer Company Name: Ademco Inc.

Date: 10/11/2023 UL LLC 12 Laboratory Dr. Research Triangle Park, NC 27709 USA To whom it may concern:

I, the undersigned, hereby authorize UL LLC to act on our behalf in all manners relating to application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by UL Verification Services Inc. on our behalf shall have the same effect as acts of our own. I, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). In authorizing UL LLC as our representative, we still recognize that we are responsible to:

a) fulfill the requirements for the scope of certification requested, including implementing any appropriate changes requested by UL Verification Services Telecommunications Certification Body (TCB) and / or the FCC;

b) supply any and all information needed for the evaluation of the products for which certification is sought;

c) make claims regarding certification only in respect of the scope for which certification has been granted;

d) not use our product certification in such a manner as to bring the TCB or FCC into disrepute and to not make any statement regarding product certification which the TCB or FCC may consider misleading or unauthorized;

e) discontinue use of all advertising matter that contains any reference thereto and complies with any and all actions required by the FCC upon suspension or cancellation of certification;

f) use certification only to indicate that products are certified in conformity with specified standards;

g) endeavor to ensure that no certificate or report or any part thereof is used in a misleading manner, and any copies of the grants/certificates shall be reproduced in their entirety;

h) comply with the requirements of the TCB and FCC, including the use of marks and label information prescribed for the scope of certification, when making reference to product certification in communication media such as documents, brochure or advertisements;

i) comply with the requirements for certification, supply any information needed for evaluation of products to be certified and, where applicable, make provision for the participation of observers;

j) ensure that products marketed under the scope of the requested certification continue to comply with the certification requirements;

k) provide a sample of a production unit for testing within 30 days of the request should this product be selected as part of either the TCBs or the FCCs market surveillance requirements;

l) keep a record of all complaints relating to products compliance with requirements of relevant standard; make records available to UL or FCC when requested; take appropriate action with respect to such complaints and any deficiencies found in the product that affect compliance with requirements for certification; document the actions taken with respect to complaints and/or deficiencies;

m) inform the TCB immediately of any changes that may affect its ability to comply with the certification requirements. This authorization is valid until further written notice from the applicant. Sincerely Yours, Christian Fouth Sr. Wireless Certification Engineer Tel: (516) 577-2000 Ademco Inc.

Date: 10/11/2023 Federal Communications Commissions Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 RE: CFR 47 2.911 (d)(7) Agent Designation Attestation FCC ID: HS9-PP300V50SE Grantee Code: HS9 Applicant (Grantee) FRN: 0004788345 To whom it may concern:

Ademco Inc. (the applicant) as required by section 2.911(d)(7), will also serve as the agent for service of process for the above referenced FCC ID. The applicant acknowledges that they will maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. The applicant further acknowledges their responsibility under CFR 47 2.929(c) to inform the FCC whenever the agent information changes. U.S. Agent Information:

Christian Fouth Resideo FCC FRN: 0004788345 2 Corporate Center Dr., Melville, NY 11747 Email Christian.fouth@resideo.com Sincerely yours, Christian Fouth Resideo 2 Corporate Center Dr., Melville, NY 11747

Federal Communications Commission Office of Engineering and Technology 1435 Oakland Mills Road Columbia, MD 21046 Date: 10/04/2023 Subject: Request to change in Identification Pursuant to FCC 47 CFR 2.933 (b), the applicant is requesting a Change in Identification-FCC To Whom It May Concern:

This application by Ademco Inc. will establish a new FCC ID: HS9-PP300V50SE of the device within our products as directed by the original applicant. The original grant to Honeywell FCC ID: 2ABC8-PP300V50SE will remain in effect. Per 47 CFR 2.933 (b):

1. The original identification is FCC ID: 2ABC8-PP300V50SE 2. The original grant date is: 01/11/2018. 3. The equipment is electrically and functionally identical. Only the applicant's name, address, label, and FCC ID are different. 4. The original test results continue to be representative of and applicable to the equipment. The following files are submitted with this application:

Cover Letter External Photos FCC ID label format and location Sincerely, Name: Christian Fouth Title: Sr. Wireless Certification Engineer Ademco Inc./Resideo Technologies Tel: (516) 577-2000

FCC Authorization for Change in ID Date: 08/16/2023 To: Federal Communications Commission 7345 Oakland Mills Road Columbia MD 21046 Subject: Request for a Change in Identification per Section 2.933 of the FCC Rules To whom it may concern:

Hereby, we:

Company Name: Honeywell Security Sensor CoE Address:

2 Corporate Center Dr Melville, NY, 11747 authorize the following company:

Company Name: Ademco Inc. Address:

2 Corporate Center Dr Melville, NY, 11747 to use our existing certification identified by: FCC ID: 2ABC8-PP300V50SE with original certification date 01/11/2018 and use it to apply for their own FCC ID (Change in ID application) for marketing reasons, whereas our existing certification will remain unaffected. The device will not differ in any way from the original i.e., there is no change in the design, circuitry, or construction, and the original test results continue to be representative of and applicable to the equipment. Sincerely, Signature:

Company name: Honeywell Name / Title: OBrien Stennis / Regulatory Engineer Tel: +1 203.484.6245 Fax: N/A E-mail: obrien.stennis@honeywell.com Address: 12 Clintonville Rd, Northford, CT, USA