all | frequencies |
|
exhibits | applications |
---|---|---|---|---|
manual |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 |
|
User Manual | Users Manual | 4.11 MiB | November 06 2013 | |||
1 | Operational Description | November 06 2013 | ||||||
1 | Cover Letter(s) | November 06 2013 | ||||||
1 | Cover Letter(s) | November 06 2013 | ||||||
1 | External Photos | November 06 2013 | ||||||
1 | ID Label/Location Info | November 06 2013 | ||||||
1 | Internal Photos | November 06 2013 | ||||||
1 | RF Exposure Info | November 06 2013 | ||||||
1 | Cover Letter(s) | November 06 2013 | ||||||
1 | Test Setup Photos | November 06 2013 | ||||||
1 | Test Report | November 06 2013 |
1 | User Manual | Users Manual | 4.11 MiB | November 06 2013 |
User Guide Wi-Fi Color Touchscreen Programmable Thermostat RTH9580 Wi-Fi RTH9590 Wi-Fi With Voice Control In the box you will find Thermostat Wallplate Screws and anchors Quick Start Guide Thermostat ID Card Wire labels User Guide Features of your Wi-Fi thermostat With your new thermostat, you can:
Connect to the Internet to monitor and control your heating/cooling system. View and change your heating/cooling system settings. View and set temperature and schedules. Receive alerts via email and get automatic upgrades. View outdoor temperature and humidity (requires Wi-Fi set up and registration). ii Welcome Congratulations on your purchase of a Honeywell Wi-Fi color touchscreen programmable thermostat. When registered to Honeywells Total Connect Comfort Solutions, you can remotely monitor and control the heating and cooling system in your home or businessyou can stay connected to your comfort system wherever you go. Honeywells Total Connect Comfort is the perfect solution if you travel frequently, own a vacation home, a business, or manage an investment property or if you are simply looking for peace of mind. This thermostat works with common 24 volt systems such as forced air, hydronic, heat pump, oil, gas, and electric. It will not work with millivolt systems, such as a gas fireplace, or with 120/240 volt systems such as baseboard electric heat. MERCURY NOTICE: Do not place your old thermostat in the trash if it contains mercury in a sealed tube. Contact the Thermostat Recycling Corporation at www.thermostat-recycle.org or 1-800-238-8192 for information on how and where to properly and safely dispose of your old thermostat. NOTICE: To avoid possible compressor damage, do not run air conditioner if the outside temperature drops below 50F (10C). Need help?
Visit wifithermostat.com or call 1-855-733-5465 for assistance before returning the thermostat to the store. 2 Table of contents About your new thermostat Home screen quick reference ..............4 Business screen quick reference .........5 Installation Installing your thermostat .....................7 Connecting to your Wi-Fi network ......25 Registering your thermostat online ....30 Operation Setting the time/date ..........................34 Setting the fan ....................................35 Selecting system mode ......................36 Preset energy-saving schedules ........37 Adjusting program schedules .............38 Overriding scheduleshome ...............41 Overriding schedulesbusiness .........42 Viewing equipment status ..................43 Setting vacation holdhome ...............44 Setting holiday/event schedules business ..........................................45 Setting custom eventsbusiness ........46 3 Setting holiday schedulebusiness ....48 Setting holiday overridebusiness ......49 Initiating occupancy modebusiness ..50 Customizing screen color ...................51 Setting preferences ............................52 Cleaning the thermostat screen .........53 Adjusting security settings ..................54 Software updates ...............................55 Unregistering your thermostat ............56 Smart Response Technology .............57 Pre-occupancy purge .........................58 Compressor protection .......................59 Auto changeover ................................60 Setting advanced preferences ............61 Changing system setup ......................64 Appendices Frequently asked questions................67 Getting help and responding to alerts ...............................................69 Troubleshooting ..................................71 Limited warranty .................................75 Quick reference: home use HOME. Touch to display Home screen. FAN. Select fan mode. SYSTEM. Select system mode (heat/cool). MENU. Touch to display options. Start here to set a program schedule. Current schedule. Change temperature setting and select temporary or permanent hold. Indoor conditions. Shows indoor temperature and humidity. Current date and time. Current status. Shows system mode (heat/
cool). Outdoor conditions. Outdoor temperature and humidity appear after registration. 4 Quick reference: business use HOME. Touch to display Home screen. FAN. Select fan mode. SYSTEM. Select system mode (heat/cool). MENU. Touch to display options. Start here to set a program schedule. Thermostat location. Quickly identify which thermostat is in control of a specific area. Current schedule. Touch an arrow to change temperature setting and set a temporary hold. Override. Touch to temporarily override the program schedule. Indoor conditions. Shows indoor temperature and humidity. Current date and time. Current status. Shows system mode (heat/
cool). Outdoor conditions. Outdoor temperature and humidity appear after registration. 5 Setting up your thermostat Setting up your Wi-Fi programmable touchscreen thermostat is easy. It is preprogrammed and ready to go as soon as it is installed and registered. 1 2 3 Install your thermostat. Connect it to your home wireless network. Register online for remote access. Before you begin, you may want to watch a brief installation video. Use the QR Code at the front of this guide, or go to wifithermostat.com/support 6 Installing your thermostat You might need the following tools to install this thermostat:
No. 2 Phillips screwdriver Pen Pencil Level (optional) Drill and bits (3/16 for drywall, 7/32 for plaster) (optional) Hammer (optional) Electrical tape (optional) 1 Switch OFF power to your heating/cooling system. Important! To protect your equipment, switch OFF the power to your heating/cooling system at the breaker box or the system switch. or Circuit breaker box Heating/cooling system power switch 7 Installing your thermostat 2 Remove old thermostat faceplate and leave wires connected. 2a Take a picture of the wire connections for later reference. 2b If no wire is connected to a terminal labeled C or no C terminal exists on the old thermostat, view the Alternate Wiring videos at wifithermostat.com/videos Important! C wire is required and is the power source for your thermostat. Without a C wire, your thermostat will not power up. 8 Note: You will need a picture of your wire connections to wire the new thermostat. C Terminal designation If you have an older thermostat with a sealed mercury tube, turn to page 2 for proper disposal instructions. Installing your thermostat 3 Label the wires. Use the supplied sticky tags to label each wire as you disconnect it. Label wires according to the old thermostat terminal designations, not by wire color. Note: If no tag matches a terminal designation, write the appropriate letter on a blank sticky tag. 4 Remove wallplate. Remove the old wallplate from the wall after all wires have been labeled and disconnected. Note: Wrap the wires around a pencil to prevent them from falling back into the wall. 9 Sticky tag Blank tags C C Terminal designation Installing your thermostat 5 Mount wallplate for Wi-Fi thermostat. Mount your new wallplate using screws and anchors included with the thermostat. If necessary:
Drill 3/16-in holes for drywall. Drill 7/32-in holes for plaster. Note: You may be able to use your existing wall anchors. Hold the wallplate up to the existing anchors to check for alignment. 10 LEVEL HERE C K Rc R W O B Y G W2 Aux/
Y2 L Y W G C R Wallplate Installing your thermostat Important! The Wi-Fi thermostat requires a C wire to operate. The C, or common, wire brings 24 VAC power to the thermostat. Many older mechanical or battery operated thermostats do not require a C wire. If you dont have a C wire, try:
Looking for an unused wire that is pushed into the wall. Connect that wire to C and check that it is connected to the 24 VAC common at your heating/cooling system. Check the video section at wifithermostat.com Note: Not all heating/cooling systems label the 24 VAC common C. Check your system manual or contact the manufacturer to find out which terminal is the 24 VAC common. View the Alternate Wiring videos at wifithermostat.com/videos Wiring For conventional heating/cooling systems (natural gas, oil or electric furnace, air conditioner), see page 12. See Glossary on page 73 for further definition. For a heat pump system, see page 14. See Glossary on page 73 for further definition. 11 Installing your thermostat labels. Wiring (Conventional System) 6A Wire the Wi-Fi thermostat to your conventional system. a Starting with the C Wire, match the sticky tag on the wire to the terminal You must have a C wire. See page 11. b Straighten wire and gently slide into terminal hole until it clicks into place.
(If you need to remove a wire, use a pen tip to press the terminal release and then pull wire out.) Note: Refer to the wiring picture you took in Step 2. Tip: To make it easier to slide the wire into place, use a pen tip to hold down the terminal release. 12 Note: The wiring for your application might be different than the wiring shown below. Terminal release C K Rc R C R W Y G W-
O/B Y G W2-
Aux/E Y2 L EXAMPLE WIRING Yours may look different Remove jumper loop ONLY if you have both R and Rc wires. Labels dont match?
See alternate wiring keys on pages 16-17. Installing your thermostat Wiring (Conventional System continued) c In the image on the right, check the box next to each connection. You will use this checklist in Step 9. d Verify wire is firmly secured by gently pulling on wire. e Repeat steps ad for all other wires. f Push any excess wire back into the wall opening after all wires are g Continue to page 20. installed. 13 Important!
Check the box for each wire you connect. You will need this information in Step 9. C K Rc R W-O/B Y G W2-Aux/E Y2 L Labels dont match?
See alternate wiring keys on pages 16-17. Installing your thermostat Wiring (Heat Pump System) 6B Wire Wi-Fi thermostat to your heat pump. a Starting with the C Wire, match the sticky tag on the wire to the terminal labels. to remove a wire, use a pen tip to You must have a C wire. See page 11. b Slide wire gently into terminal hole until it clicks into place. (If you need press the terminal release and then pull the wire out.) Note: Refer to the wiring picture you took in Step 2. Tip: To make it easier to slide the wire into place, use a pen tip to hold down the terminal release. 14 Note: The wiring for your application might be different than the wiring shown below. Terminal release C K Rc R C R O Y G X U A W-
O/B Y G W2-
Aux/E Y2 L EXAMPLE WIRING Yours may look different Remove jumper loop ONLY if you have both R and Rc wires. Labels dont match?
See alternate wiring keys on pages 18-19. Installing your thermostat Wiring (Heat Pump System continued) c In the image on the right, check the box next to each connection. You will use this checklist in Step 9. d Verify wire is firmly secured by gently pulling on wire. e Repeat steps ad for all other wires. Note: If old thermostat has separate wires on AUX and E, use a wire nut to attach both wires to a separate wire. Slide this third wire into the W2-Aux/E terminal. f Push any excess wire back into the wall opening after all wires are g Continue to page 20. installed. 15 Important!
Check the box for each wire you connect. You will need this information in Step 9. C K Rc R W-O/B Y G W2-Aux/E Y2 L Labels dont match?
See alternate wiring keys on pages 18-19. Installing your thermostat Alternate wiring (Conventional System) Use this if your wire labels dont match the terminal labels. Note: You must have a C wire or equivalent. See page 11. C K 1 Rc R 2 16 C C1 X B Rc R R RH 4 V W W1 Y G W2 Y2 2 W-
O/B Y G W2-
Aux/E Y2 L See key to 1 2 on page 17. Installing your thermostat Alternate wiring key (Conventional System) 1 Do not use K terminal. For future use. 2 loop. If you have both an R and Rc wire, unplug the jumper loop by pulling on the wire If your old thermostat had both R and RH wires, connect the R wire to the Rc terminal, the RH wire to the R terminal, and unplug the jumper loop. 17 Installing your thermostat Alternate wiring (Heat Pump System) Use this if your wire labels dont match the terminal labels. Note: You must have a C wire or equivalent. See page 11. C K 1 Rc R 3 2 C X B Rc R R V VR 2 O B Y G X X2 AUX W W1 W2 Y2 L F 4 W O/B Y 5 G W2 Aux/E Y2 L 7 6 See key to 1 7 on page 19. 18 Installing your thermostat Alternate wiring key (Heat Pump System) 1 2 3 4 5 6 7 Do not use K terminal. For future use. Leave jumper loop in place. If your old thermostat had both V and VR wires, check wifithermostat.com for help. If your old thermostat had separate O and B wires, attach the B wire to the C terminal. If another wire is attached to the C terminal, check wifithermostat.com for help. Attach the O wire to the O/B terminal. On the Type of Changeover Valve screen, select Cooling Changeover Valve. See page 66. If your old thermostat had an O wire and not a B wire, attach the O wire to the O/B terminal. If your old thermostat had separate Y1, W1, and W2 wires, check wifithermostat.com for help. If the old thermostat has separate wires on Aux and E, use a wire nut to attach both wires to a separate wire. Slide this third wire into the W2-Aux/E terminal. This is the system monitor. If the monitor finds a problem, you will see an orange alert button on the thermostat home screen. 19 Installing your thermostat 7 Attach thermostat to wallplate. Align the thermostat with the wallplate and then snap into place. Wallplate LEVEL HERE Thermostat 20 Installing your thermostat 8 Switch heating/cooling system ON. Important!
8a Verify that the C wire is connected at the thermostat and at the heating/cooling system. 8b Make sure the heating/cooling system door is firmly secured. 8c Switch power back ON for your heating/cooling system at the breaker box or its power switch. or Circuit breaker box Heating/cooling system power switch 21 Installing your thermostat Before connecting to your Wi-Fi network, you need to set initial thermostat options to define your heating/cooling system:
Language Home or business You can customize other options later. 9 Follow prompts on the screen to select appropriate options. 9a Touch the language you want the thermostat to display, then touch Next. 9b Select Home or Business installation, then touch Next. 22 Next Next Installing your thermostat 9c Touch Next, or name the thermostat locationtouch THERMOSTAT and follow the rest of the instructions. 9d Select what your thermostat will control and touch Next. Note: Touch the orange Help button on any screen for more information. 23 Next Next Installing your thermostat 9e Select your system type and touch Next. The system type determines other selections for completing initial setup. Use the checklist from Step 6d when making selections. 9f Touch Next after making selections on each screen. 9g Touch Done on the last screen. The thermostat displays an option to connect to your Wi-Fi network. Note: Touch the orange Help button on any screen for more information. 24 Next Connecting to your Wi-Fi network After touching Done on the final screen of the initial set up (page 24), the thermostat displays an option to connect to your Wi-Fi network. 1 Connect the Wi-Fi network. Touch Yes to connect the thermostat to your Wi-Fi network. The screen displays the message Searching for wireless networks. Please wait... after which it displays a list of all Wi-Fi networks it can find. Note: If you cannot complete this step now, touch Ill do it later. The thermostat will display the home screen. Complete this process by selecting MENU > Wi-Fi Setup. Continue with Step 2. 2 Select the network. 2a Touch the name of the network you want to use. The thermostat displays a password page. 25 Yes Your Network Note: If your home network is not shown on the list, touch Rescan. Connecting to your Wi-Fi network 2b Using the keyboard, touch the characters that spell out your home network password. 2c Touch Done. The thermostat displays Connecting to your network. Please wait... then shows a Connection Successful screen. 2d Touch Next to display the registration information screen. 2e Note your Thermostat MAC and Thermostat CRC. You need these numbers to complete online registration. 26 Done Next Connecting to your Wi-Fi network To register your thermostat, follow the instructions beginning on page 30. Note: The Register Online screen remains active until you complete registration and/or touch Done. Note: If you touch Done before you register online, your home screen displays an orange alert button telling you to register. Touching that button displays registration information and an option to snooze the task. Done Register online for remote access Press for info 27 Disconnecting your Wi-Fi network 1 Touch MENU. 2 Select Wi-Fi Setup. 3 Touch Disconnect from Network. The thermostat will display a question to confirm your selection. 4 Touch Yes to confirm that you want to disconnect from the network. The thermostat will display the Wi-Fi Setup screen. 5 Touch OK to display the menu. MENU Wi-Fi Setup Disconnect from Network Yes 28 MENU Wi-Fi Setup Reconnecting your Wi-Fi network 1 Touch MENU. 2 Select Wi-Fi Setup. 3 Touch the name of the network you want to use. The thermostat may display a password page. 4 To enter a password, touch characters to spell out your home network password, then touch Done. 5 The thermostat displays Connecting to your network. Please wait... then a Connection Successful screen. 6 Touch Next. If your thermostat is registered, you will see your signal strength and other status information. Touch Done. If the screen displays Register Online for Remote Access, follow instructions on page 30. 29 Registering your thermostat online To view and set your Wi-Fi thermostat remotely, you must have a Total Connect Comfort account. Use the following steps. 1 Open the Total Connect Comfort web site. Go to mytotalconnectcomfort.com View the Wi-Fi Thermostat Registration video at wifithermostat.com/videos 0 7 5 30 Registering your thermostat online 2 Login or create an account. If you have an account, click Login or click Create An Account 2a Follow the instructions on the screen. 2b Check your email for an activation message from My Total Connect Comfort. This may take several minutes. Note: If you do not receive a response, check your junk mailbox or use an alternate e-mail address. 2c Follow activation instructions in the email. 2d Log in. 31 Registering your thermostat online Thermostat ID Card Use the MAC ID and CRC ID to register this product at mytotalconnectcomfort.com Carte didentification de thermostat Uti isez lidentification MAC et l dentification CRC pour enregistrer ce produit mytota connectcomfort.com Tarjeta de identificacin del termostato Uti ice a ident ficacin MAC y la dentificacin CRC para inscr bir este producto en mytota connec comfort.com HONEYWELL MODEL: RTH8580WF MAC ID:
MAC CRC:
U S Reg stered Trademark 2012 Honeywell Interna ional Inc 69-2723EFS01 M S 04-12 Pr n ed n U S A 69 2723EFS 01 MAC ID MAC CRC 3 Register your Wi-Fi thermostat. After you are logged in to your Total Connect Comfort account, register your thermostat. 3a Follow the instructions on the screen. After adding your thermostat location, you must enter the thermostats unique identifiers:
MAC ID MAC CRC Note: These IDs are listed on the Register Online screen or on the Thermostat ID Card included in the thermostat package. The IDs are not case sensitive. 32 Registering your thermostat online When the thermostat is successfully registered, the Total Connect Comfort registration screen will display a SUCCESS message. You can now control your thermostat from anywhere through your laptop, tablet, or smartphone. GET IT ON Download on iTunes Total Connect Comfort free app is available for Apple iPhone, iPad and iPod touch devices at iTunes or at Google Play for all Android devices. 33 Setting the time/date 1 Touch the current time. The screen displays Set Time/Set Date. 2 Touch Set Time or Set Date. 3 Touch p or q until the proper time/
date is displayed. 4 Touch Done to save or Cancel to ignore changes. Note: This thermostat will automatically update for daylight saving time (if observed in your area) and all date/time information is stored. If the thermostat is connected to Wi-Fi and registered to Total Connect Comfort, the current time is updated from the internet. 34 Fri, Jun 14, 2013 6:30 pm 30 Done FAN Done Setting the fan 1 Touch FAN to display fan settings. 2 Touch On, Automatic, Circulate, or Follow Schedule. 3 Touch Done to save and exit. On: Fan is always on. Automatic: Fan runs only when the heating or cooling system is on. Circulate: Fan runs randomly about 35% of the time (home use only). Follow Schedule: Fan controlled by program (see pages 37-42). Note: Touch Auto or On to temporarily override the programmed fan schedule. 35 SYSTEM Done Setting system mode 1 Touch SYSTEM to display system settings. 2 Touch desired option:
Heat: Thermostat controls only the heating system. Cool: Thermostat controls only the cooling system. Off: Heating/cooling systems are off. Automatic: Thermostat selects heating or cooling as needed depending on the indoor temperature. Emergency Heat (heat pumps with aux. heat): Controls auxiliary/
emergency heat. Compressor is locked out. 3 Touch Done to save and exit. Note: The Automatic and Emergency Heat system settings may not appear, depending on how your thermostat was installed. 36 Preset energy-saving schedules This thermostat uses default Energy Saver settings that can reduce your heating/
cooling expenses by as much as 33%. To customize settings, see next page. Period Start time Heat
(Mon-Fri) Cool
(Mon-Fri) Heat
(Sat-Sun) Cool
(Sat-Sun) e s U e m o H Wake Leave Return Sleep 6:00 am 8:00 am 6:00 pm 10:00 pm 70 62 70 62 78 85 78 82 70 62 70 62 Period Start time Heat Cool Occupied 1 Unoccupied 1 Occupied 2*
Unoccupied 2*
8:00 am 10:00 pm 12:00 am 12:00 am 70 55 70 55 75 85 75 85 e s U s s e n s u B i 78 85 78 82 Fan On Auto On Auto
* Period 2 is cancelled by default. If you activate it, the values shown above are default settings. 37 MENU Create / Edit Schedule Adjusting program schedules 1 Touch MENU. 2 Select Create/Edit Schedule. Touch View/Edit to view the full schedule and make a quick adjustment. Touch Guide Me to create a schedule by answering simple questions. Touch Ill do it myself to manually create a program schedule. See page 39. Note: To reduce costs, use the pre-set Energy Saver settings described on page 37. 38 Adjusting program schedules If you selected Ill do it myself on the Create/
Edit Schedule screen (page 38), follow these steps:
1 Select the days to schedule, touch Next. 2 Touch Wake to set your Wake time for selected days. Next Heat: 70 Cool: 78 Fan: Auto 6:00 am WAKE 39 Adjusting program schedules 3 Touch p or q to set Heat and Cool temperatures for the Wake period, then touch Done. 4 Touch other time periods (Leave, Return, Sleep) to set time and temperatures for each. 5 Touch Done to save and exit. Note: Touch Delete Period to eliminate any unwanted time period. Note: Touch Fan Settings to customize fan settings for any time period. 40 Done Overriding schedules: home use 1 Touch p or q to adjust the temperature (right side of screen) and the Hold Until time (left side). The schedule will resume when the Hold Until time expires. 2 Touch Switch to Permanent Hold to keep the same temperature until you change it or resume the program schedule. 3 Touch Cancel Hold at any time to resume the program schedule. Switch To Permanent Hold 41 Overriding schedules: business use Touch p or q to adjust the temperature. It will be maintained until the hold time you set. To change the hold time, touch the Hold Until arrow buttons. This time can be adjusted up to the maximum time set on the Override Duration screen in Advanced Preferences (page 61). Touch Override to use a pre-set occupied temperature if a person uses the room during an unoccupied period. The new temperature will be maintained for 1 hour and can be adjusted up to the maximum time set on the Override Duration screen in Advanced Preferences (page 61). The programmed schedule will resume when the override timer expires. Touch Cancel Hold at any time to resume the program schedule. 42 OVERRIDE Viewing equipment status 1 Touch MENU. 2 Select Equipment Status. 3 Touch p or q to view the status of all the equipment your thermostat is controlling. Depending on how your thermostat was installed, the Equipment Status screen can report data about the following systems:
Heating and cooling Fan Thermostat information 43 Equipment Status MENU Done Setting vacation hold: home use This feature helps you save energy while you are away, and restores comfortable settings just before you return home. 1 Touch MENU. 2 Select Vacation Mode. 3 Touch p or q to select the date you leave, then touch Next for further scheduling details, including times of day, temperature settings, return date, and return settings. 4 Review your selections on the last display, and touch Done to save your settings. Touch Back, then Cancel to ignore the changes. Vacaon Mode 44 MENU Next Done Setting holiday/event schedules: business use MENU Holiday / Event Scheduler Custom events This feature helps you conserve energy when the workplace is unoccupied for special events and holidays. 1 Touch MENU. 2 Select Holiday/Event Scheduler. 3 Select the item you want to schedule. Custom Events lets you set up other days for special schedules. US and Canadian Holiday options let you select from a list of holidays commonly observed in each country. 4 Make selections as prompted on each screen. For more information, see next two pages. 5 Touch Done to save your settings. 45 Setting custom events: business use This feature lets you customize temperature settings to be maintained during a specific event. You can set up an event for a specific date or day in a month. The thermostat resumes normal scheduling after the event. 1 Select Custom events from the Holiday/
Event Scheduler menu. 2 Select Create a new event. Custom events Create a new event 46 Setting custom events: business use 3 Select Specific Date or Month/Weekday. For Specific Date, you are prompted to select the start date, settings, end date, and frequency for the event. For Month/Weekday, you are prompted to select the month, day of the week, week of the month, settings, length of event, and frequency of the event. 4 Review the settings and touch Done to save them. Touch Back, then Cancel to ignore the changes. Next Done 47 Setting holiday schedule: business use This feature lets you customize temperature settings to be maintained on specified national holidays. The thermostat resumes normal scheduling between selected holidays. 1 Select US Holidays or Canadian Holidays from the Holiday/Event Scheduler menu. 2 Select Add/Edit Holidays. A list of national holidays is displayed. 3 Touch the check box next to each holiday for which you want to maintain specific settings,
(Touch p or q to scroll through the holiday list.) then touch Next. Set the holiday schedule for Occupied or Unoccupied temperatures, depending whether the building will be in use. 4 Touch p or q to select the Heat and Cool temperatures. 5 Review the settings and touch Done to save them. Touch Back, then Cancel to ignore the changes. 48 Next Setting holiday override: business use This feature lets you customize temperature settings to be maintained from now until a specified date. The thermostat resumes normal scheduling on the date you select. 1 Touch MENU. 2 Select Holiday Mode to display temperatures while you are away on holiday. 3 Touch p or q to select the Heat and Cool temperatures, then touch Next to select return date. 4 Review the settings and touch Done to save them. Touch Back, then Cancel to ignore the changes. Note: The cool temperature can only be set higher than the unoccupied program setting and the heat temperature can only be set lower than the unoccupied program setting. 49 Holiday Mode MENU Done Initiating occupancy mode: business use This feature keeps temperature at an energy-saving level until you touch Press to start occupancy. When you arrive, touch the button to maintain a comfortable temperature while the room is occupied. Touch the p or q buttons to set the temperature or the Hold Until time. The temperature is maintained until the time you set. Temperature returns to an energy-
saving level after the timer expires, or the Occupied period ends. Press to start occupancy 50 Customizing screen color You can customize your thermostat display to match your dcor. 1 Touch Menu. 2 Touch Color Themes. 3 Select the name of a color to use Color Themes a predefined background, or select Custom to define you own background color and text. If you select a color name, the screen shows an example on the left. Touch Done to accept that selection. If you touch Custom, the screen gives you instructions. Touch Next to step through the choices; touch Done when you are satisfied with your changes. 51 MENU Done Next MENU Preferences Setting preferences Preference menu options let you select how the thermostat displays information or responds to certain situations. 1 Touch MENU and select Preferences. 2 Select an option and follow prompts:
Reminders Utility Schedule Options Backlight Smart Response Technology Advanced Preferences Restore Default Schedule 3 Touch Done to save your settings. Touch Cancel to ignore changes. 52 MENU Clean Screen Yes Cleaning the thermostat screen When you select the Clean Screen option, the screen is locked so you dont accidentally change settings while you clean. 1 Touch MENU. 2 Select Clean Screen. A prompt asks if you want to clean the screen for 30 seconds. 3 Touch Yes. A countdown timer displays elapsed time until the screen is reactivated. Note: Do NOT spray any liquid directly on the thermostat. Spray liquids onto a cloth, then use the damp cloth to clean the screen. Use water or household glass cleaner. Avoid abrasive cleansers. 53 MENU Security Sengs Change Lock Mode Adjusting security settings You can adjust security options to prevent unauthorized changes to system settings. 1 Touch MENU and select Security Settings. 2 Select Change Lock Mode. 3 Select an option and follow prompts:
Unlocked: Full access allowed. Partially locked: Only temperature can be changed. Fully locked: No access allowed. Note: If you choose to use a password for additional security, write it here for reference:
54 Software updates Honeywell periodically issues updates to the software for this thermostat. The updates occur automatically through your Wi-Fi connection. All your settings are saved, so you will not need to make any changes after the update occurs. Updates occur in the early morning. After your thermostat receives the software, it reboots, briefly displaying the Honeywell logo. The screen then shows Updating software with a green progress bar. When the update is complete, your home screen will appear as usual. Note: If you are not connected to Wi-Fi or registered at Total Connect Comfort, you will not get automatic updates. 55 Unregistering your thermostat If you remove the thermostat from your Total Connect Comfort website account
(for example, youre moving and leaving the thermostat behind), follow these steps:
1 On mytotalconnectcomfort.com log into your account. 2 Under My Account, select Edit My Profile. 3 Click the Delete My Account button. Your thermostat will display an orange button that says Register Online. 56 Smart Response Technology This feature (home use only) allows the thermostat to learn how long the heating/
cooling system takes to reach programmed temperature settings, so the temperature is reached at the time you set. For example: Set the Wake time to 6:00 am, and the temperature to 70. The heat will come on before 6:00 am, so the temperature is 70 by 6:00 am. Note: Select Smart Response Technology in the Preferences menu (page 52). The message in recovery is displayed when the system is activated before a scheduled time period. 57 Pre-occupancy purge This business use feature turns on the fan 1 to 3 hours before each occupied time period, to provide a comfortable work environment when you arrive. 58 Compressor protection The thermostat keeps the compressor off for a few minutes before restarting, to prevent equipment damage. During this off time, the message waiting for equipment is displayed on screen. 59 Auto changeover This feature is used in climates where both air conditioning and heating are used on the same day. When the system is set to Automatic, the thermostat automatically selects heating or cooling depending on the indoor temperature. Heat and cool settings must be at least 3 degrees apart. The thermostat will automatically adjust settings to maintain this 3-degree separation. Note: Select Auto Changeover on the Heating and Cooling System Changeover screen under Advanced Preferences. See Setting advanced preferences on page 61. 60 Setting advanced preferences You can change options for a number of system functions. Although many options, such as language and temperature indication settings are the same for all setups, others depend on the type of system you have. 1 Touch MENU. The thermostat displays a list of options. 2 Select Preferences > Advanced Preferences. The thermostat displays the first screen of options that you can change. 3 On each screen, make changes as needed, then touch Next to display new options. Repeat this step until you have made all changes. Tables on pages 62-63 explain the screens and options under Advanced Preferences. 4 When you have made all changes, press Done to save and exit. 61 MENU Preferences Advanced Preferences Next Setting advanced preferences Advanced Preferences Options (MENU > Preferences > Advanced Preferences) Screen Title Scheduling Options Temperature Indication Scale Heating and Cooling System Changeover Number of Schedule Periods Pre-occupancy Purge Duration Type of Override Override Duration Settings and Options Select Non-programmable or Programmable. Programmable uses default or customized programming to automatically raise and lower temperature settings for different times of day. Select Fahrenheit or Celsius. Select Manual or Automatic. Select 2 Periods Per Day or 4 Periods Per Day. (see page 37). Select how long the fan will run before each occupied period: Off, 1, 2, or 3 hours. Select Standard to maintain the programmed periods or Initiate Occupancy to use energy-saving settings until a user presses Start Occupancy. Select how long to maintain temperature during an override: 1-10 hours or No Limit. 62 Setting advanced preferences Advanced Preferences Options (concluded) Screen Title Early Recovery for Heating Early Recovery for Cooling Temperature Limits Keypad Lockout Clock Format Daylight Saving Time Indoor Display Offsets Settings and Options Select No to begin recovery on schedule or Yes to ramp up temperature early. Select No to begin recovery on schedule or Yes to ramp down temperature early. Select the Minimum Cool and Maximum Heat Limit. Select Unlocked/Partially Locked/Locked. Select 12 Hour or 24 Hour. Select Off or On. If set to On, the system will automatically change time/date to account for daylight saving. Select the number of degrees to offset indoor temperature or percentage to offset indoor humidity. 63 Changing system setup If your needs change, you can change the basic system settings you chose during thermostat installation (page 22). 1 Touch MENU. The thermostat displays a list of options. 2 Select System Setup. The thermostat displays the first screen of options that you can change. 3 On each screen, make changes as needed then touch Next to display new options. Repeat this step until you have made all changes. Tables on pages 65-66 explain the System Setup screens and options. 4 When you have made all changes, press Done to save and exit. 64 System Setup MENU Next Touch the Help button to see information about screen options. Changing system setup Note: Touch the orange Help button on any screen for more information. System Setup Options (MENU > System Setup) Screen Title Language Thermostat installed in Your thermostat location Your thermostat controls Your system type Settings and Options English/Franais/Espaol. Home/Business (Thermostat is used in a residential (default) or commercial setting). Touch THERMOSTAT button to display a screen where you can enter a custom name using a keypad. If you have only one thermostat, you can leave the name as THERMOSTAT. For business installations you can check a box to display the thermostat name on the home screen. Select Heating or Cooling or both (default). Select Forced Air (default), Heat Pump, or Hot Water or Steam. Each option offers different choices on the following screens. See Step 9e under Installing your Thermostat on page 24. Your forced air heating system type Select how your forced air system is powered: Gas/Oil (default) or Electric. Select Standard Efficiency Forced Air (default) or High Efficiency Forced Efficiency of your Air. heating system 65 Changing system setup System Setup Options (concluded) Screen Title Your heating system type Number of cooling stages Number of heating stages Your fan control Type of changeover valve Number of heat pump compressor stages Your backup heat Settings and Options If you selected Hot Water or Steam on Your system type, select the specific heating system here. Select 1 Stage (default) or 2 Stages. If you are unsure, note which wires you have connected: Y wire only (1 stage) or Y and Y2(refer to your check list in Step 6 on page 12.) Select 1 Stage (default) or 2 Stages. If you are unsure, note which wires you have connected: W wire only (1 stage) or W and W2 (refer to your check list in Step 6 on page 12.) Select whether your thermostat (default) or heating system controls the fan. If you selected Heat Pump on Your system type, select whether it uses a cooling changeover valve (default) or heating changeover valve. f you are unsure, note which wires you have connected: refer to your check list in Step 6 on page 14. Select 1 Stage (default) or 2 Stages. If you are unsure, note which wires you have connected: Y wire only (1 stage) or Y and Y2(refer to your check list in Step 6 on page 14). No or Yes (default) you can determine whether you have backup heat by refering to your check list in Step 6 on page 14. 66 Frequently asked questions
:Q Will my thermostat still work if I lose my Wi-Fi connection?
:A Yes, the thermostat will operate your heating and/or cooling system with or without Wi-Fi.
:Q How do I find the password to my router?
:A Contact the manufacturer of the router or check the router documentation.
:Q Why am I not seeing my Wi-Fi setup page?
:A You are probably connected only to your router, not to your thermostat. Try connecting to the thermostat again.
:Q Why isnt my thermostat connecting to my Wi-Fi router even though it is very close to the thermostat?
:A Verify that the password entered for the Wi-Fi router is correct.
:Q My thermostat is unable to register to the Total Connect Comfort website.
:A Verify that the thermostat is correctly enrolled on your homeWi-Fi network. At Menu > Wi-Fi Setup, check for the Wi-Fi-signal strength icon. Verify that the Wi-Fi 67 Frequently asked questions router has a good internet connection. On your computer, verify that you can open the site at mytotalconnectcomfort.com If you cannot open the site, switch off the internet modem for a few seconds, then power it back on.
:Q I registered on the Total Connect Comfort website but was unable to login using my new account.
:A Check your email and ensure that you received an activation email. Follow the instructions to activate your account and then login to the website.
:Q I have signed up on Total Connect Comfort website and have not received a confirmation email.
:A Check for the email in your Junk or Deleted folder.
:Q Is there a way to extend the signal strength?
:A Most standard routers can be set up to be a repeater. You can also purchase and install a Wi-Fi repeater. For more FAQs, see wifithermostat.com 68 Getting help and responding to alerts Your thermostat offers two types of assistance, if these assistance options do not answer your questions, review the FAQs (pages 67-68) and troubleshooting tips (pages 71-72). On screen help Most displays include an orange Help button. 1 Touch Help to display instructions for using the screen. 2 Touch OK to redisplay the original screen. Help OK 69 Getting help and responding to alerts On screen alerts Your home screen will display a large orange button when you need to correct a setting or system problem. 1 Touch the button, the thermostat displays instructions for completing the task to which you were alerted. 2 Touch OK on the instruction display, then carry out the task. When the task is complete, the alert button will no longer be displayed. Replace Air Filter Press for info OK 70 Troubleshooting If you have difficulty with your thermostat, please try the following suggestions. Most problems can be corrected quickly and easily. Display is blank Check circuit breaker and reset if necessary. Make sure power switch at heating and cooling system is on. Make sure furnace door is closed securely. Make sure C wire is connected (see page 11). Cannot change system setting to Cool Check that System Setup screen Your thermostat controls or Your system type is set to match your heating and cooling equipment (see page 65). Fan does not turn on when heat is required Wait appears on the screen Check that System Setup screen Your fan control is set to match your heating equipment (see page 66). Compressor protection feature is engaged. Wait 5 minutes for the system to restart safely, without damage to the compressor. 71 Troubleshooting Heat pump issues cool air in heat mode, or warm air in cool mode Heating or cooling system does not respond Check your setting for System Setup screen Type of changeover valve to make sure it is properly configured for your system (see page 66). Touch SYSTEM to set system to Heat. Make sure the temperature is set higher than the Inside temperature. Touch SYSTEM to set system to Cool. Make sure the temperature is set lower than the Inside temperature. Check circuit breaker and reset if necessary. Make sure power switch at heating and cooling system is on. Make sure furnace door is closed securely. If Wait is displayed, the compressor protection timer is on. Wait 5 minutes for the system to restart safely, without damaging the compressor (see page 59). Heating system is running in cool mode Check that System Setup screen Your thermostat controls or Your system type is set to match your heating and cooling equipment (see System Setup Options (MENU > System Setup) on page 65). 72 Glossary C wire The C or common wire brings 24 VAC power to the thermostat from the heating/cooling system. Some older mechanical or battery operated thermostats may not have this wire connection. It is necessary for establishing a Wi-Fi connection to your home network. Heat Pump heating/cooling system Heat pumps are used to heat and cool a home. If your old thermostat has a setting for auxiliary or emergency heat, you likely have a heat pump. Conventional heating/cooling system Nonheat pump type systems; these include air handlers, furnaces or boilers that run on natural gas, oil or electricity. They may or may not include an air conditioner. Jumper Loop In this thermostat, a plug with a wire loop located below the terminal block is used to connect the R and Rc terminals. MAC ID, MAC CRC Alphanumeric codes that uniquely identify your thermostat. QR Code Quick response code. A two-dimensional,machine-readable image. Your wireless device can read the black and white pattern in the square and link its browser directly to a web site. QR Code is a registered trademark of DENSO WAVE INCORPORATED. 73 Regulatory information FCC Compliance Statement (Part 15.19) (USA only) This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
1 This device may not cause harmful interference, and 2 This device must accept any interference received, including interference that may cause undesired operation. FCC Warning (Part 15.21) (USA only) Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. FCC Interference Statement (Part 15.105 (b)) (USA only) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. 74 Equipment interface module, thermostats and outdoor sensor To comply with FCC and Industry Canada RF exposure limits for general population/ uncontrolled exposure, the antenna(s) used for these transmitters must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna. Portable Comfort Control This portable transmitter with its antenna complies with FCC and Industry Canada RF exposure limits for general population/ uncontrolled exposure. This device must not be co-located or operating in conjunction with any other antenna or transmitter. Section 7.1.2 of RSS-GEN Under Industry Canada regulations, this radio transmitter may only operate using an antenna of type and maximum
(or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication. Section 7.1.3 of RSS-GEN Operation is subject to the following two conditions:
1 This device may not cause interference, and 2 This device must accept any interference, including interference that may cause undesired operation of the device. 1-year limited warranty Honeywell warrants this product, excluding battery, to be free from defects in the workmanship or materials, under normal use and service, for a period of one (1) year from the date of purchase by the consumer. If at any time during the warranty period the product is determined to be defective or malfunctions, Honeywell shall repair or replace it (at Honeywells option). If the product is defective,
(i) return it, with a bill of sale or other dated proof of purchase, to the place from which you purchased it; or
(ii) call Honeywell Customer Care at 1-855-733-5465. Customer Care will make the determination whether the product should be returned to the following address: Honeywell Return Goods, Dock 4 MN10-3860, 1885 Douglas Dr. N., Golden Valley, MN 55422, or whether a replacement product can be sent to you. This warranty does not cover removal or reinstallation costs. This warranty shall not apply if it is shown by Honeywell that the defect or malfunction was caused by damage which occurred while the product was in the possession of a consumer. Honeywells sole responsibility shall be to repair or replace the product within the terms stated above. HONEYWELL SHALL NOT BE LIABLE FOR ANY LOSS OR DAMAGE OF ANY KIND, INCLUDING ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING, DIRECTLY OR INDIRECTLY, FROM ANY BREACH OF ANY WARRANTY, EXPRESS OR IMPLIED, OR ANY OTHER FAILURE OF THIS PRODUCT. Some states do not allow the exclusion or limitation of incidental or consequential damages, so this limitation may not apply to you. THIS WARRANTY IS THE ONLY EXPRESS WARRANTY HONEYWELL MAKES ON THIS PRODUCT. THE DURATION OF ANY IMPLIED WARRANTIES, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, IS HEREBY LIMITED TO THE ONE-YEAR DURATION OF THIS WARRANTY. Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you. This warranty gives you specific legal rights, and you may have other rights which vary from state to state. If you have any questions concerning this warranty, please write Honeywell Customer Relations, 1985 Douglas Dr, Golden Valley, MN 55422 or call 1-855-733-5465. In Canada, write Retail Products ON15-02H, Honeywell Limited/
Honeywell Limite, 35 Dynamic Drive, Toronto, Ontario M1V4Z9. 75 Automation and Control Systems Honeywell International Inc. 1985 Douglas Drive North Golden Valley, MN 55422 wifithermostat.com U.S. Registered Trademark. Apple, iPhone, iPad, iPod touch and iTunes are trademarks of Apple Inc. All other trademarks are the property of their respective owners. 2013 Honeywell International Inc. 69-2790EF01 CNG 03-13 Printed in U.S.A. 692790EF01 Guide de lutilisateur Thermostat programmable Wi-Fi cran tactile couleur RTH9580 Wi-Fi RTH9590 Wi-Fi avec commande vocale Vous trouverez dans la bote Thermostat Plaque murale Vis et ancres Guide de dmarrage rapide Carte didentification du thermostat tiquettes de fils Guide de lutilisateur Caractristiques de votre thermostat Wi-Fi Avec votre nouveau thermostat, vous pouvez :
Vous connecter Internet pour surveiller et contrler votre systme de chauffage/
refroidissement. Consulter et modifier les rglages de votre systme de chauffage/refroidissement. Consulter et rgler la temprature et les programmes. Recevoir des alertes par courrier lectronique et obtenir des mises jour automatiques. Afficher la temprature et lhumidit extrieures (ncessite de configurer le rseau Wi-Fi et denregistrer le produit). ii Bienvenue Nous vous flicitons de votre achat dun thermostat programmable cran tactile couleur Wi-Fi Honeywell. Aprs vous tre enregistr auprs du service Total Connect Comfort dHoneywell, vous pouvez surveiller et contrler distance le systme de chauffage et de refroidissement de votre domicile ou de votre entreprise vous pouvez rester connect votre service confort o que vous soyez. Le systme Total Connect Comfort de Honeywell est la solution parfaite si vous voyagez frquemment, possdez une maison de vacances ou une entreprise ou grez un immeuble de placement, ou tout simplement si vous recherchez la tranquillit desprit. Ce thermostat fonctionne sur les systmes de 24 V commun tels que les systmes air puls, eau chaude, thermopompe, mazout, gaz et lectriques. Il ne fonctionne pas avec les systmes mV, tels que les foyers gaz, ou avec les systmes de 120/240 V tels que les chauffages de plinthe lectrique. AVIS RELATIF AU MERCURE : Ne jetez pas lancien thermostat dans la poubelle sil contient du mercure dans un tube scell. Contactez la Thermostat Recycling Corporation ladresse www.thermostat-recycle.org ou composez le 1-800-238-8192 pour savoir comment et o mettre au rebut votre thermostat usag. AVIS : Pour viter dendommager le compresseur, ne faites pas tourner le climatiseur si la temprature extrieure est infrieure 10 C (50 F). Besoin daide?
Consultez le site wifithermostat.com ou composez le 1-855-733-5465 pour obtenir de laide avant de renvoyer le thermostat au magasin. 2 Table des matires propos du nouveau thermostat Rfrence rapide : utilisation rsidentielle ....... 4 Rfrence rapide : utilisation commerciale ...... 5 Installation Installation de votre thermostat ........................ 7 Connexion votre rseau Wi-Fi ..................... 25 Enregistrement de votre thermostat en ligne ......................................... 30 Fonctionnement Rglage de lheure/la date ............................. 34 Rglage du ventilateur ................................... 35 Slection du mode du systme ...................... 36 Programmes dconomie dnergie prconfigurs .................................................. 37 Rglage des horaires de programmation....... 38 Drogation aux programmes : rsidentielle .... 41 Drogation aux programmes :
commerciale ................................................... 42 Affichage du statut de lquipement ............... 43 Rglage du maintien pendant les vacances : rsidentielle ............................ 44 Rglage des programmes vacances/jours fris : commerciale .............. 45 Rglage des vnements personnaliss : commerciale .......................... 46 Rglage du programme des jours fris : commerciale .............................. 48 Lancement du mode Occup :
commerciale ................................................... 50 Personnalisation de la couleur de lcran ...... 51 Prfrences de rglage .................................. 52 Nettoyage de lcran du thermostat ............... 53 Rglages de scurit ..................................... 54 Mises jour logicielles ................................... 55 Dconnexion de votre thermostat .................. 56 Technologie Smart Response ........................ 57 Balayage avant occupation ............................ 58 Protection du compresseur ............................ 59 Commutation automatique ............................. 60 Rglage des prfrences avances ............... 61 Modification de la configuration du systme .. 64 Annexes Foire aux questions ........................................ 67 Obtenir de laide et rpondre aux alertes ...... 69 Dpannage ..................................................... 71 Garantie limite .............................................. 75 3 Rfrence rapide : utilisation rsidentielle ACCUEIL. Touchez pour afficher lcran Accueil. VENTILATEUR. Slectionnez le mode du ventilateur. SYSTME. Slectionnez le mode du systme
(chauffage/refroidissement). MENU. Touchez pour afficher les options. Commencez ici pour configurer un programme. Programme en cours. Modifiez le rglage de la temprature et slectionnez le maintien provisoire ou permanent. Conditions intrieures. Affiche la temprature et lhumidit intrieures. Heure et date actuelles. Statut en cours. Affiche le mode du systme
(chauffage/refroidissement). Conditions extrieures. La temprature et lhumidit extrieures saffichent aprs lenregistrement. 4 Rfrence rapide : utilisation commerciale ACCUEIL. Touchez pour afficher lcran Accueil. VENTILATEUR. Slectionnez le mode du ventilateur. SYSTME. Slectionnez le mode du systme
(chauffage/refroidissement). MENU. Touchez pour afficher les options. Commencez ici pour configurer un programme. Emplacement du thermostat. Identifie rapidement le thermostat contrlant une zone spcifique. Programme en cours. Touchez une flche pour modifier le rglage de temprature et rgler le maintien provisoire. Drivation. Touchez pour droger provisoirement au programme. Conditions intrieures. Affiche la temprature et lhumidit intrieures. Heure et date actuelles. Statut en cours. Affiche le mode du systme
(chauffage/refroidissement). Conditions extrieures. La temprature et lhumidit extrieures saffichent aprs lenregistrement. 5 Configuration de votre thermostat La configuration de votre thermostat programmable cran tactile couleur Wi-Fi est facile. Il est prprogramm et prt fonctionner ds quil est install et enregistr. 1 2 3 Installez votre thermostat. Connectez-le au rseau sans fil de votre domicile. Enregistrez-vous en ligne pour bnficier de laccs distance. Avant de commencer, vous dsirerez peut-tre visionner une courte vido dinstallation. Utilisez le QR Code figurant sur la couverture de ce guide ou rendez-vous ladresse wifithermostat.com./support. 6 Installation de votre thermostat Vous aurez besoin des outils suivants pour linstallation de ce thermostat :
Un tournevis cruciforme n 2 Un stylo Un crayon Un niveau (optionnel) Une perceuse et des mches 1 Coupez lalimentation sur votre systme de chauffage/
refroidissement. Important! Pour protger votre quipement, coupez lalimentation de votre systme de chauffage/
refroidissement au niveau de la bote des disjoncteurs ou du commutateur du systme.
(3/16 po pour une cloison sche, 7/32 po pour du pltre)
(optionnels) Un marteau (optionnel) Du ruban lectrique (optionnel) ou Bote des disjoncteurs Interrupteur dalimentation du systme de chauffage/
refroidissement 7 Installation de votre thermostat 2 Retirez la plaque de lancien thermostat et laissez les fils connects. 2a Prenez une photo des connexions de cblage pour rfrence ultrieure. 2b Si aucun fil nest connect la borne C ou si aucune borne C nest prsente sur lancien thermostat, visionnez les vidos expliquant les autres mthodes de cblage wifithermostat.com/videos Important! Le fil C est requis et reprsente la source dalimentation du thermostat. Sans fil C, votre thermostat ne se mettra pas en marche. 8 Remarque : Vous aurez besoin dune photo des connexions de cblage pour cbler le nouveau thermostat. C Dsignation des bornes Si vous possdez un thermostat plus ancien tube de mercure scell, allez la page 2 pour les instructions de mise au rebut correctes. Installation de votre thermostat 3 tiquetez les fils. Utilisez les tiquettes autocollantes fournies pour tiqueter chaque fil lorsque vous le dconnectez. tiquetez les fils conformment aux dsignations de bornes de lancien thermostat et non pas en fonction des couleurs des fils. Remarque : Si aucune tiquette ne correspond une dsignation de borne, notez la lettre approprie sur une tiquette collante vierge. 4 Retirez la plaque murale. Retirez lancienne plaque murale du mur aprs avoir tiquet et dconnect tous les fils. tiquette autocollante tiquettes vierges C C Dsignation des bornes Remarque : Enroulez les fils autour dun crayon pour viter quils ne tombent dans louverture du mur. 9 Installation de votre thermostat 5 Montez la plaque murale du thermostat Wi-Fi. Montez votre nouvelle plaque murale laide des vis et chevilles fournies avec le thermostat. Au besoin :
Percez des trous de 3/16 po pour les cloisons sches. Percez des trous de 7/32 po pour le pltre. Remarque : Vous pourrez peut-tre utiliser les ancres murales dj installes. Tenez la plaque murale sur les ancres dj installes pour vrifier lalignement. 10 LEVEL HERE C K Rc R W O B Y G W2 Aux/
Y2 L Y W G C R Plaque murale Installation de votre thermostat Important! Le fonctionnement du thermostat Wi-Fi requiert lutilisation dun fil C. Le fil C, ou neutre, amne lalimentation 24 V c.a. au thermostat. De nombreux thermostats mcaniques ou piles plus anciens nont pas besoin dun fil C. Si vous ne disposez pas dun fil C, essayez :
de rechercher un fil inutilis enfonc dans le mur. Connectez ce fil au fil C et vrifiez sil est connect au fil C 24 V c.a. de votre systme de chauffage/
refroidissement. Consultez la section vido ladresse wifithermostat.com Remarque : Les systmes de chauffage/refroidissement nindiquent pas tous le fil C commun de 24 V c.a. Consultez le manuel du systme ou le fabricant pour avoir quelle borne est la borne commune de 24 V c.a. Visionnez les vidos expliquant les autres mthodes de cblage ladresse wifithermostat.com/videos Cblage Pour les systmes de chauffage/refroidissement conventionnels (gaz naturel, appareil de chauffage mazout ou lectrique, climatiseur), voir page 12. Voir le Glossaire la page 73 pour les dfinitions. Pour les systmes thermopompe, consultez la page 14. Voir le Glossaire la page 73 pour les dfinitions. 11 Installation de votre thermostat le fil ltiquette de la borne. Cblage (systme conventionnel) 6A Branchez le thermostat Wi-Fi sur votre systme conventionnel. a En commenant par le fil C, faites correspondre ltiquette autocollante sur Vous devez avoir un fil C. Consultez la page 11. b Redressez le fil et faites-le glisser dlicatement dans lorifice de la borne dun stylo pour appuyer sur le dispositif de libration et retirez le fil.) Remarque: Consultez la photo de cblage prise ltape 2. Conseil : Pour faciliter linsertion du fil, utilisez lextrmit dun stylo pour appuyer sur le dispositif de libration de la borne. jusqu ce quil senclenche en position.
(Si un fil doit tre retir, utilisez lextrmit 12 Remarque : Le cblage de votre application spcifique peut tre diffrent du cblage illustr ci-aprs. Libration de la borne C K Rc R C R W Y G W-
O/B Y G W2-
Aux/E Y2 L EXEMPLE DE CBLAGE Le vtre peut tre diffrent Retirez la boucle de raccordement SEULEMENT si les fils R et Rc sont tous les deux prsents. Les tiquettes ne correspondent pas? Reportez-vous au code de cblage alternatif aux pages 16-17. Installation de votre thermostat Cblage (systme conventionnel -
suite) c Dans limage droite, cochez la case ct de chaque connexion. Vous utiliserez cette liste de vrification ltape 9. d Vrifiez que le fil est bien attach en tirant dlicatement dessus. e Rptez les tapes ad pour tous les autres fils. f Repoussez tout excdent de fil dans louverture murale une fois tous les fils installs. g Passez la page 20. 13 Important!
Cochez la case pour chaque fil que vous connecter. Vous aurez besoin de cette information ltape 9. C K Rc R W-O/B Y G W2-Aux/E Y2 L Les tiquettes ne correspondent pas? Reportez-vous au code de cblage alternatif aux pages 16-17. Installation de votre thermostat Cblage (systme thermopompe) 6B Branchez le thermostat Wi-Fi votre thermopompe. a En commenant par le fil C, faites correspondre ltiquette autocollante sur le fil ltiquette de la borne. lorifice de la borne jusqu ce quil Vous devez avoir un fil C. Consultez la page 11. b Faites dlicatement glisser le fil dans senclenche en position. (Si un fil doit tre retir, utilisez lextrmit dun stylo pour appuyer sur le dispositif de Remarque : Consultez la photo de cblage prise ltape 2. Conseil : Pour faciliter linsertion du fil, utilisez lextrmit dun stylo pour appuyer sur le dispositif de libration de la borne. libration et retirez le fil.) 14 Remarque : Le cblage de votre application spcifique peut tre diffrent du cblage illustr ci-aprs. Disposition de libration de la borne C K Rc R C R O Y G X U A W-
O/B Y G W2-
Aux/E Y2 L EXEMPLE DE CBLAGE Le vtre peut tre diffrent Retirez la boucle de raccordement SEULEMENT si les fils R et Rc sont tous les deux prsents. Les tiquettes ne correspondent pas? Reportez-vous au code de cblage alternatif aux pages 18-19. Installation de votre thermostat Cblage (systme thermopompe -
suite) c Dans limage droite, cochez la case ct de chaque connexion. Vous utiliserez cette liste de vrification ltape 9. d Vrifiez que le fil est bien attach en tirant dlicatement dessus. e Rptez les tapes ad pour tous les autres fils. Remarque : Si lancien thermostat a des fils spars sur Aux et E, utilisez un serre-fil pour attacher les deux fils un fil spar. Faites glisser ce troisime fil dans la borne W2-Aux/E. f Poussez tout excdent de fil dans louverture mural une fois tous les fils installs. g Passez la page 20. 15 Important!
Cochez la case pour chaque fil que vous connecter. Vous aurez besoin de cette information ltape 9. C K Rc R W-O/B Y G W2-Aux/E Y2 L Les tiquettes ne correspondent pas? Reportez-vous au code de cblage alternatif aux pages 18-19. Installation de votre thermostat Cblage alternatif (systme conventionnel) Utilisez ceci si vos tiquettes de fils ne correspondent pas aux rfrences de bornes. Remarque : Vous devez avoir un fil C ou un fil quivalent. Consultez la page 11. C K 1 Rc R 2 2 C C1 X B Rc R R RH 4 V W W1 Y G W2 Y2 W-
O/B Y G W2-
Aux/E Y2 L Reportez-vous aux codes 1 2 de la page 17. 16 Installation de votre thermostat Code de cblage alternatif (systme conventionnel) 1 Nutilisez pas la borne K. Pour utilisation ultrieure. 2 Si un fil R et Rc sont prsents, dbranchez la boucle de raccordement en tirant sur la boucle. Si votre ancien thermostat a des fils R et RH, branchez le fil R la borne Rc, le fil RH la borne R, et dbranchez la boucle de raccordement. 17 Installation de votre thermostat Cblage alternatif (systme thermopompe) Utilisez ceci si vos tiquettes de fils ne correspondent pas aux rfrences de bornes. Remarque : Vous devez avoir un fil C ou un fil quivalent. Consultez la page 11. 2 C K 1 Rc R 3 C X B Rc O B Y G R R V VR 2 X X2 AUX W W1 W2 Y2 L F 4 W O/B Y 5 G W2 Aux/E Y2 L 7 6 Reportez-vous aux codes 1 7 de la page 19. 18 Installation de votre thermostat Code de cblage alternatif (systme thermopompe) 1 2 3 4 5 6 7 Nutilisez pas la borne K. Pour utilisation ultrieure. Laissez la boucle de raccordement en place. Si votre ancien thermostat est pourvu des fils V et VR, consultez le site wifithermostat.com pour obtenir de laide. Si votre ancien thermostat est pourvu de fils O et B spars, fixez le fil B la borne C. Si un autre fil est reli la borne C, consultez le site wifithermostat.com pour obtenir de laide. Reliez le fil O la borne O/B. Sur lcran Type de vanne de commutation, slectionnez Vanne de commutation de refroidissement. Voir la page 66. Si votre ancien thermostat est pourvu dun fil O et pas dun fil B, fixez le fil O la borne O/B. Si votre ancien thermostat est pourvu de fils Y1, W1 et W2, consultez le site wifithermostat.com pour obtenir de laide. Si lancien thermostat a des fils spars sur Aux et E, utilisez un serre-fil pour attacher les deux fils un fil spar. Faites glisser ce troisime fil dans la borne W2-Aux/E. Il sagit du moniteur du systme. Si le moniteur dtecte un problme, vous verrez un bouton dalerte orange sur lcran daccueil du thermostat. 19 Installation de votre thermostat 7 Fixez le thermostat la plaque murale. Alignez le thermostat sur la plaque murale puis embotez-le. Plaque murale LEVEL HERE Thermostat 20 Installation de votre thermostat 8 Mettez le systme de chauffage/
refroidissement en marche. Important!
8a Vrifiez que le fil C est branch sur le thermostat et sur le systme de chauffage/
refroidissement. 8b Assurez-vous que la porte du systme de chauffage/
refroidissement est bien ferme. 8c Rtablissez lalimentation du systme de chauffage/
refroidissement au niveau de la bote des disjoncteurs ou de linterrupteur dalimentation. 21 ou Bote des disjoncteurs Interrupteur dalimentation du systme de chauffage/
refroidissement Installation de votre thermostat Avant deffectuer la connexion votre rseau Wi-Fi, vous devez rgler les options initiales du thermostat pour dfinir le systme de chauffage/refroidissement :
Langue Rsidence ou Commerce Vous pouvez personnaliser dautres options plus tard. 9 Suivez les invites sur lcran pour slectionner les options appropries. 9a Touchez la langue que vous souhaitez voir sur le thermostat, puis touchez Suivant. 9b Slectionnez lapplication Rsidence ou Commerce, puis touchez Suivant. 22 Suivant Suivant Installation de votre thermostat 9c Touchez Suivant ou renommez le thermostat en touchant THERMOSTAT et en suivant le reste des instructions. 9d Slectionnez votre type de systme et touchez Suivant. Remarque : Touchez le bouton Aide orange sur nimporte quel cran pour obtenir plus dinformations. 23 Suivant Suivant Installation de votre thermostat 9e Slectionnez votre type de systme et touchez Suivant. Le type de systme dtermine dautres slections pour terminer la configuration initiale. Utilisez la liste de vrification de ltape 6d pour faire les slections. 9f Touchez Suivant aprs avoir effectu les slections sur chaque cran. 9g Touchez Termin sur le dernier cran. Le thermostat affiche loption de connexion votre rseau Wi-Fi. Remarque : Touchez le bouton Aide orange sur nimporte quel cran pour obtenir plus dinformations. 24 Suivant Connexion votre rseau Wi-Fi Aprs avoir touch Termin sur lcran final du rglage initial (page 24), le thermostat affiche une option pour la connexion au rseau Wi-Fi. 1 Connectez le rseau Wi-Fi. Touchez Oui pour connecter le thermostat votre rseau Wi-Fi. Lcran affiche le message Recherche de rseaux sans fil. Veuillez patienter... aprs lequel une liste de tous les rseaux Wi-Fi dtects saffiche. Remarque : Si vous ne pouvez pas terminer cette tape maintenant, touchez Je le ferai plus tard. Le thermostat affiche lcran daccueil. Terminez ce processus en slectionnant MENU >
Configuration Wi-Fi. Passez ltape 2. 2 Slectionnez le rseau. Oui Publique Votre rseau Voisin 2a Touchez le nom du rseau que vous souhaitez utiliser. Le thermostat affiche la page du mot de passe. Remarque : Si votre rseau rsidentiel nest pas affich sur la liste, touchez Rebalayer. 25 Connexion votre rseau Wi-Fi 2b En utilisant le clavier, touchez les caractres pour saisir le mot de passe de votre rseau rsidentiel. 2c Touchez Termin. Le thermostat affiche Connexion au rseau en cours. Veuillez patienter... puis affiche lcran Connexion russie. 2d Touchez Suivant pour afficher lcran des informations denregistrement. 2e Notez les identifiants MAC et CRC du thermostat. Ces identifiants sont requis pour terminer lenregistrement en ligne. Inscrivez le mot de passe de votre rseau Wi-Fi Termin Votre thermostat est bien connect votre rseau Suivant 26 Connexion votre rseau Wi-Fi Pour enregistrer votre thermostat, suivez les instructions commenant la page 30. Remarque : Lcran Enregistrement en ligne reste actif jusqu ce que lenregistrement soit termin et/ou que vous touchiez Termin. Remarque : Si vous touchez Termin avant de vous enregistrer en ligne, votre cran daccueil affiche un bouton dalerte orange vous indiquant de procder lenregistrement. Touchez ce bouton pour afficher les informations denregistrement et une option pour retarder lexcution de cette tche. 27 Termin Enregistrez-
vous en ligne pour bncier de l acces distance. Appuyez pour info Dconnexion du rseau Wi-Fi 1 Touchez MENU. 2 Slectionnez Configuration Wi-Fi. 3 Touchez Dconnecter du rseau. Ce thermostat affiche une question pour confirmer votre slection. 4 Touchez Oui pour confirmer que vous souhaitez vous dconnecter du rseau. Le thermostat affiche lcran de configuration Wi-Fi. 5 Touchez OK pour afficher le menu. MENU Conguration Wi-Fi Votre rseau Inconnu Dconnecter du rseau tes-vous sr de vouloir vous dconnecter de votre rseau?
Oui 28 Reconnexion au rseau Wi-Fi 1 Touchez MENU. 2 Slectionnez Configuration Wi-Fi. 3 Touchez le nom du rseau que vous souhaitez utiliser. Le thermostat peut afficher la page du mot de passe. MENU Conguration Wi-Fi 4 Pour inscrire un mot de passe, touchez les caractres pour crire le mot de passe de votre rseau rsidentiel, puis touchez sur Termin. Publique Votre rseau Voisin 5 Le thermostat affiche Connexion au rseau en cours. Veuillez patienter... puis affiche lcran Connexion russie . 6 Touchez Suivant. Si votre thermostat est enregistr, vous verrez la force de votre signal et dautres informations de statut. Touchez Termin. Si lcran affiche Enregistrez-vous en ligne pour bnficier de laccs distance , suivez les instructions la page 30. 29 Enregistrement de votre thermostat en ligne Pour visualiser et rgler votre thermostat Wi-Fi distance, vous devez possder un compte Total Connect Comfort. Voici comment procder. 1 Ouvrez le site web Total Connect Comfort. Allez mytotalconnectcomfort.com Visionnez la vido denregistrement du thermostat Wi-Fi ladresse wifithermostat.com/videos 0 7 5 30 Enregistrement de votre thermostat en ligne 2 Ouvrez une session ou crez un compte. Si vous possdez un compte, cliquez sur Login (Ouvrir une session) une session ou cliquez sur Create An Account (Crer un compte) 2a Suivez les instructions lcran. 2b Consultez votre messagerie et recherchez le message dactivation provenant de My Total Connect Comfort. Ceci peut prendre plusieurs minutes. Remarque : Si vous ne recevez aucune rponse, consultez votre bote de pourriels ou utilisez une autre adresse lectronique. 2c Suivez les instructions dactivation figurant dans le message. 2d Ouvrez une session. 31 Enregistrement de votre thermostat en ligne Thermostat ID Card Use the MAC ID and CRC ID to register this product at mytotalconnectcomfort.com Carte didentification de thermostat Uti isez lidentification MAC et l dentification CRC pour enregistrer ce produit mytota connectcomfort.com Tarjeta de identificacin del termostato Uti ice a ident ficacin MAC y la dentificacin CRC para inscr bir este producto en mytota connec comfort.com HONEYWELL MODEL: RTH8580WF MAC ID:
MAC CRC:
U S Reg stered Trademark 2012 Honeywell Interna ional Inc 69-2723EFS01 M S 04-12 Pr n ed n U S A 69 2723EFS 01 MAC ID MAC CRC 3 Enregistrez votre thermostat Wi-F. Lorsque vous avec accs votre compte Total Connect Comfort, enregistrez votre thermostat. 3a Suivez les instructions lcran. Aprs avoir ajout lemplacement de votre thermostat, vous devez entrer les identifiants uniques de votre thermostat :
MAC ID MAC CRC Remarque : Ces identifiants figurent sur lcran denregistrement en ligne ou sur la carte didentification du thermostat fournie dans la bote du thermostat. Ces identifiants ne sont pas sensibles la casse. 32 Enregistrement de votre thermostat en ligne Lorsque le thermostat est convenablement enregistr, lcran denregistrement Total Connect Comfort affiche un message de russite. Vous pouvez maintenant contrler votre thermostat de nimporte quel endroit au moyen de votre ordinateur portatif, de votre tablette ou de votre tlphone intelligent. GET IT ON Download on iTunes Lapplication Total Connect Comfort gratuite et est disponible pour les dispositifs iPhone, iPad et iPod touch dApple sur iTunes ou sur Google Play pour tous les dispositifs Android. 33 Rglage de lheure/la date 1 Touchez lheure courante. Lcran affiche Rgler lheure/Rgler la date. 2 Touchez Rgler lheure ou Rgler la date. 3 Touchez p ou q jusqu ce que lheure/la date adquates saffichent. 4 Touchez Termin pour enregistrer ou Annuler pour ignorer les changements. Remarque : Ce thermostat se mettra jour automatiquement lheure dt/
dhiver (si respect dans votre zone) et linformation de la date/heure est enregistre. Si le thermostat est connect au Wi-Fi et est enregistr au Total Connect Comfort, lheure courante est mise jour partir de lInternet. 34 ven, 14 juin, 2013 6:30 pm Termin VENTILATEUR Termin Rglage du ventilateur 1 Touchez VENTILATEUR pour afficher les rglages du ventilateur. 2 Touchez Marche, Automatique, Circulation ou Suivre le programme. 3 Touchez Termin pour enregistrer et quitter. Marche : le ventilateur est toujours activ. Automatique : le ventilateur fonctionne uniquement lorsque le systme de chauffage ou de refroidissement est en marche. Circulation : le ventilateur fonctionne de faon alatoire, environ 35 %
du temps (utilisation rsidentielle uniquement). Suivre le programme : ventilateur contrl par le programme (voir les pages 37-42). Remarque : Touchez Automatique ou Marche pour droger provisoirement au programme du ventilateur. 35 Rglage du mode du systme 1 Touchez SYSTME pour afficher les rglages SYSTME du systme. 2 Touchez loption dsire :
Termin Chauffage : Le thermostat commande uniquement le systme de chauffage. Refroidissement : Le thermostat commande uniquement le systme de refroidissement. Arrt : Les systmes de chauffage et de refroidissement sont arrts. Automatique : Le thermostat slectionne le chauffage ou le refroidissement selon le besoin en fonction de la temprature ambiante. Chauffage durgence (thermopompes avec chauffage auxiliaire) : commande le chauffage auxiliaire/durgence. Le compresseur est verrouill. 3 Touchez Termin pour enregistrer et quitter. 36 Remarque : Les rglages de systme Automatique et Chauffage durgence peuvent ne pas safficher, selon la manire dont votre thermostat a t install. Programmes dconomie dnergie prconfigurs Ce thermostat utilise les rglages de lconomiseur dnergie par dfaut pour obtenir une rduction des cots de chauffage/refroidissement jusqu 33 %. Pour personnaliser les rglages, consultez la page suivante. Priode Heure de dbut Chauffage
(Lun-Ven) Refroidissement
(Lun-Ven) Chauffage
(Sam-Dim) Refroidissement
(Sam-Dim) n o i t a s i l i t U e l l e i t n e d s r i n o i t a s i l i t U e l a i c r e m m o c Rveil Dpart Retour Sommeil 6 h 00 8 h 00 18 h 00 22 h 00 70 62 70 62 78 85 78 82 70 62 70 62 Priode Heure de dbut Chauffage Refroidissement Occupe 1 Inoccupe 1 Occupe 2*
Inoccupe 2*
8 h 00 22 h 00 12 h 00 12 h 00 70 55 70 55 75 85 75 85 78 85 78 82 Ventilateur Marche Auto Marche Auto
* La priode 2 est annule par dfaut. Si elle est active, les valeurs ci-dessus sont les rglages par dfaut. 37 Rglage des horaires de programmation MENU Crer / Modif ier I horaire 1 Touchez MENU. 2 Slectionnez Crer/Modifier lhoraire. Touchez Afficher/Modifier pour voir le programme complet et faire un rglage rapide. Touchez Aidez-moi pour crer un programme en rpondant de simples questions. Touchez Je le ferai moi-mme pour crer un programme manuellement. Consultez la page 39. Remarque : Pour rduire les cots, utilisez les rglages prconfigurs de lconomiseur dnergie dcrits la page 37. 38 Rglage des horaires de programmation Si vous slectionnez Je le ferai moi-mme sur lcran Crer/Modifier programme (page 38), suivez ces tapes :
1 Slectionnez les jours programmer puis Suivant. 2 Touchez Rveil pour rgler lheure de rveil pour les jours slectionns. Suivant Chau: 70 Refr: 78 Vent: Auto 6:00 am RVEIL 39 Rglage des horaires de programmation 3 Touchez p ou q pour rgler les tempratures de chauffage et de refroidissement pour la priode de rveil, puis touchez Termin. 4 Touchez les autres priodes de temps
(Dpart, Retour, Sommeil) pour rgler lheure et les tempratures de chaque priode. 5 Touchez Termin pour enregistrer et quitter. Remarque : Touchez Supprimer priode pour liminer toute priode de temps non souhaite. Remarque : Touchez Rglages ventilateur pour personnaliser les rglages du ventilateur pour les priodes souhaites. 40 Termin Drogation aux programmes : utilisation rsidentielle Passez Mainen Permanent 1 Touchez p ou q pour rgler la temprature (ct droit de lcran) et la dure Maintien jusqu (ct gauche). Le programme reprend lorsque la dure Maintien jusqu a expir. 2 Slectionnez Passez maintien permanent pour maintenir la mme temprature jusqu la prochaine modification ou jusqu la reprise du programme configur. 3 Touchez Annuler maintien tout moment pour ractiver le programme configur. 41 Drogation aux programmes : utilisation commerciale Touchez p ou q pour ajuster la temprature. Celle-ci restera en vigueur jusqu la dure de maintien rgle. Pour modifier la dure de maintien, touchez les boutons flchs Maintien jusqu. Cette heure peut tre ajuste jusqu la dure maximum rgle sur lcran Dure de la drogation dans les Prfrences avances
(page 61). Touchez Drivation pour utiliser une temprature pour priode occupe prrgle si une personne est prsent durant une priode non occupe. La nouvelle temprature est maintenue pendant une heure et peut tre rgle pour la dure maximale dfinie sur lcran Dure de la drogation dans les Prfrences avances (page 61). Le programme rgl reprend la fin de la dure de la drogation. Touchez Annuler Maintien tout moment pour ractiver le programme configur. 42 DRIVATION Affichage du statut de lquipement 1 Touchez MENU. 2 Slectionnez tat du matriel. 3 Touchez p ou q pour afficher le statut de tout lquipement contrl par le thermostat. En fonction de linstallation du thermostat, lcran de statut de lquipement peut indiquer les donnes relatives aux systmes suivants :
Chauffage et refroidissement Ventilateur Informations relatives au thermostat 43 tat du matriel MENU Termin Rglage du maintien pendant les vacances : utilisation rsidentielle Cette caractristique vous permet dconomiser de lnergie en votre absence et restaure une temprature confortable juste avant votre retour. 1 Touchez MENU. 2 Slectionnez Mode vacances. 3 Touchez p ou q pour slectionner la date de dpart, puis touchez Suivant pour afficher plus de dtails de programmation, y compris les heures du jour, les rglages de temprature, la date de retour et les rglages de retour. 4 Passez en revue vos slections sur le dernier affichage, et touchez Termin pour enregistrer vos rglages. Touchez Retour puis Annuler pour ignorer les changements. 44 MENU Mode Vacances Suivant Termin Rglage des programmes vacances/jours fris : utilisation commerciale MENU Gesonnaire des jours fris /
vnements vnements personnaliss Cette fonction permet de conserver de lnergie lorsque personne ne se trouve sur le lieu de travail durant les jours fris et les vnements spciaux. 1 Touchez MENU. 2 Slectionnez Gestionnaire des jours fris/
vnements. 3 Slectionnez larticle programmer. vnements personnaliss vous permet de configurer dautres jours pour les programmes spciaux. Les options Jours fris pour les amricains et canadiens vous permettent de slectionner une liste des jours fris gnralement observs par chaque pays. 4 Rpondez aux invites de chaque cran. Pour plus dinformations, consultez les deux pages suivantes. 5 Touchez Termin pour enregistrer vos rglages. 45 Rglage des vnements personnaliss : utilisation commerciale Cette fonction vous permet de personnaliser les rglages de temprature maintenir durant un vnement spcifique. Vous pouvez configurer un vnement pour une date ou un jour spcifique du mois. Le thermostat reprend le programme normal aprs lvnement. 1 Slectionnez vnements personnaliss dans le menu Gestionnaire des jours fris/vnements. 2 Slectionnez Crer un nouvel vnement. vnements personnaliss Crer un nouvel vnement 46 Rglage des vnements personnaliss : utilisation commerciale 3 Slectionnez Date spcifique ou Mois/
Jour de la semaine. Pour Date spcifique, vous tes invit slectionner la date de dbut, les rglages, la date de fin et la frquence de lvnement. Pour Mois/Jour de la semaine, vous tes invit slectionner le mois, le jour de la semaine, la semaine du mois, les rglages, la dure de lvnement et la frquence de lvnement. 4 Passez les rglages en revue et touchez Termin pour les enregistrer. Touchez Retour puis Annuler pour ignorer les changements. 47 Suivant Termin Rglage du programme des jours fris : utilisation commerciale Cette fonction vous permet de personnaliser les rglages de temprature maintenir durant un jour fri national spcifique. Le thermostat reprend le programme normal entre les jours fris slectionns. 1 Slectionnez Jours fris amricains ou Jours fris canadiens dans le menu Gestionnaire des jours fris/vnements. 2 Slectionnez Ajouter/Modifier jours fris. Une liste des jours fris nationaux saffiche. 3 Touchez la case cocher prs de chaque jour fri pour lequel vous souhaitez maintenir des rglages spcifiques. (Touchez p ou q pour dfiler dans la liste des jours fris.) Puis touchez Suivant. Rglez le programme des jours fris pour les tempratures en priodes Occupes et Non occupes, en fonction de loccupation du btiment. 4 Touchez p ou q pour slectionner les tempratures de chauffage et de refroidissement. 5 Passez les rglages en revue et touchez Termin pour les enregistrer. Touchez Retour puis Annuler pour ignorer les changements. 48 Suivant Rglage du programme des jours fris : utilisation commerciale MENU Mode Jours fris Cette fonction vous permet de personnaliser les rglages de temprature maintenir partir de maintenant jusqu une date spcifie. Le thermostat reprend le programme normal la date slectionne. 1 Touchez MENU. 2 Slectionnez Mode Jours fris pour afficher les tempratures lors de votre absence durant les jours fris. 3 Touchez p ou q pour slectionner les tempratures de chauffage et de refroidissement, puis slectionnez Suivant pour slectionner la date de retour. 4 Passez les rglages en revue et touchez Termin pour les enregistrer. Touchez Retour puis Annuler pour ignorer les changements. Remarque : Le rglage de la temprature de refroidissement ne peut tre que suprieur au rglage du programme en priode non occupe et le rglage de la temprature de chauffage ne peut tre quinfrieur au rglage du programme en priode non occupe. 49 Termin Lancement du mode Occup : utilisation commerciale Appuyer pour lancer I occupaon Cette fonction maintient la temprature un niveau conomique jusqu ce que vous touchiez Appuyer pour commencer la priode occupe. larrive, touchez le bouton pour maintenir une temprature confortable pendant que la pice est occupe. Touchez les boutons p ou q pour rgler la temprature ou la dure de maintien. La temprature est maintenue jusqu lheure rgle. La temprature revient un niveau dconomie dnergie aprs expiration du temporisateur ou la fin de la priode Occupe. 50 Personnalisation de la couleur de lcran Vous pouvez personnaliser laffichage de votre thermostat pour lassortir votre dcor. 1 Touchez Menu. 2 Touchez Thmes de couleurs. 3 Slectionnez le nom dune couleur utiliser comme arrire-plan prdfini, ou slectionnez Personnaliser pour dfinir votre propre couleur darrire-plan et de police. En choisissant un nom de couleur, lcran affiche un chantillon sur la gauche. Touchez Termin pour accepter celle slection. En touchant Personnaliser, lcran vous fournira des instructions. Touchez Suivant pour passez ltape suivante; touchez Termin lorsque vous tes satisfait de vos modifications. 51 Thmes de couleurs MENU Termin Suivant MENU Prfrences Rglages des prfrences Les options du menu Prfrences vous permettent de slectionner la faon dont le thermostat affiche les informations ou rpond certaines situations. 1 Touchez MENU et slectionnez Prfrences. 2 Slectionnez une option et suivez les invites :
Rappels Options du calendrier utilitaire Rtroclairage Technologie Smart Response Prfrences avances Restaurer le programme par dfaut 3 Touchez Termin pour enregistrer vos rglages. Touchez Annuler pour ignorer les changements. 52 MENU Neoyer I cran Oui Nettoyage de lcran du thermostat Lorsque vous slectionnez loption de nettoyage de lcran, lcran se verrouille pour que les rglages ne soient pas modifis accidentellement durant le nettoyage. 1 Touchez MENU. 2 Slectionnez Nettoyer lcran. Une invite vous demande si vous souhaitez nettoyer lcran pendant 30 secondes. 3 Touchez Oui. Une minuterie montre le temps coul jusqu ce que lcran soit ractiv. Remarque : Ne pulvrisez AUCUN liquide directement sur le thermostat. Pulvrisez les liquides sur un chiffon, puis utilisez le chiffon humide pour nettoyer lcran. Nutilisez pas deau ni de nettoyant vitres mnager. vitez les produits de nettoyage abrasifs. 53 MENU Rglage de scurit Modifier mode de verrouillage Rglages de scurit Vous pouvez rgler les options de scurit pour viter les modifications non autorises des rglages du systme. 1 Touchez MENU et slectionnez Rglages de scurit. 2 Slectionnez Modifier mode de verrouillage. 3 Slectionnez une option et suivez les invites :
Dverrouill : accs intgral permis. Partiellement verrouill : seule la temprature peut tre modifie. Compltement verrouill : Aucun accs permis. Remarque : Si un mot de passe est choisi pour plus de scurit, notez-le ici pour rfrence :
54 Mises jour logicielles Honeywell publie rgulirement des mises jour pour le logiciel de ce thermostat. Ces mises jour se font automatiquement par lintermdiaire de votre connexion Wi-Fi. Tous vos rglages sont enregistrs, de sorte que vous navez effectuer aucune modification aprs la mise jour. Les mises jour ont lieu tt le matin. Une fois votre thermostat mis jour, il est relanc et affiche brivement le logo Honeywell. Lcran affiche Mise jour logicielle... avec une barre de progression verte. Une fois la mise jour termine, votre cran daccueil saffiche comme dhabitude Remarque : Si le thermostat nest pas connect au Wi-Fi et est enregistr Total Connect Comfort, vous nobtiendrez pas de mises jour automatiques. 55 Dconnexion de votre thermostat Si vous annulez lenregistrement de votre thermostat sur le site Web Total Connect Comfort (par exemple vous dmnagez sans emporter le thermostat), suivez ces tapes :
1 Sur mytotalconnectcomfort.com, ouvrez votre compte. 2 Dans Mon Compte, slectionnez Modifier mon profil. 3 Cliquez sur le bouton Delete My Account (Supprimer mon compte). Votre thermostat affiche un bouton orange indiquant Enregistrez-vous en ligne. 56 Technologie Smart Response Cette fonction permet au thermostat
(rsidentiel uniquement) dapprendre combien de temps il faut votre systme de chauffage/refroidissement pour atteindre le rglage de temprature programm, afin que la temprature voulue soit atteinte lheure programme. Par exemple : rglez lheure de rveil 6 heures et la temprature 70. Le chauffage est mis en fonction avant 6 heures de manire ce que la temprature soit de 70 6 heures. Remarque : Slectionnez Technologie Select Smart Response dans le menu Prfrence (page 52). Le message en reprise saffiche lorsque le systme est activ avant une priode de temps programme. 57 Balayage avant occupation Cette fonction pour utilisation commerciale active le ventilateur de 1 heure 3 heures avant chaque priode occupe pour fournir un environnement de travail confortable larrive. 58 Protection du compresseur Le thermostat maintient le compresseur arrt pendant quelques minutes avant un redmarrage, pour viter dendommager lquipement. Pendant cette dure darrt, le message En attente du matriel saffiche lcran. 59 Commutation automatique Cette fonction est utilise dans les climats o le conditionnement dair et le chauffage sont utiliss le mme jour. Lorsque le systme est rgl sur Automatique, le thermostat slectionne automatiquement le chauffage ou le refroidissement en fonction de la temprature intrieure. Lcart entre les rglages de chauffage et de refroidissement doit tre dau moins 3 degrs. Le thermostat ajuste automatiquement les rglages afin de maintenir ces 3 degrs dcart. Remarque : Slectionnez Commutation automatique sur lcran de Commutation du systme de chauffage et de refroidissement dans Prfrences avances. Voir Rglage des prfrences avances la page 61. 60 Rglage des prfrences avances Vous pouvez modifier des options pour plusieurs fonctions du systme. Bien que de nombreuses options, telles que la langue et les rglages dindication de temprature, soient les mmes pour toutes les configurations, dautres dpendent du type de systme utilis. 1 Touchez MENU. Le thermostat affiche une liste doptions. 2 Slectionnez Prfrences > Prfrences avances. Le thermostat affiche le premier cran doptions que vous pouvez modifier. 3 Sur chaque cran, effectuez les modifications selon le besoin puis touchez Suivant pour afficher les nouvelles options. Rptez cette tape jusqu ce que tous les changements aient t effectus. Les tableaux aux pages 62-63 expliquent les crans et les options sous Prfrences avances. 4 Lorsque toutes les modifications ont t effectues, touchez Termin pour enregistrer et quitter. 61 MENU Prfrences Prfrences avances Suivant Rglage des prfrences avances Options des prfrences avances (MENU > Prfrences > Prfrences avances) Titre de lcran Options de programmation chelle dindication de temprature Commutation de systme de chauffage et refroidissement Nombre de priodes programmes Dure du balayage avant occupation Type de priorit Rglages et options Slectionnez Non programmable ou Programmable. Loption Programmable utilise la programmation par dfaut ou une programmation personnalise pour augmenter ou rduire automatiquement les rglages de tempratures pour diffrentes priodes de la journe. Slectionnez Fahrenheit ou Celsius. Slectionnez Manuel ou Automatique. Slectionnez 2 priodes par jour ou 4 priodes par jour. (Voir la page Calendriers conomiseurs dnergie prrgls la page 37.) Slectionnez la dure de fonctionnement du ventilateur avant chaque priode occupe : arrt, 1, 2 ou 3 heures. Slectionnez Standard pour maintenir les priodes programmes ou Initier occupation pour utiliser les rglages conomiseurs dnergie jusqu ce quun utilisateur appuie sur Commencer occupation. 62 Rglage des prfrences avances Options de prfrences avances (fin) Titre de lcran Dure de la drogation Rcupration prcoce pour le chauffage Rcupration prcoce pour le refroidissement Limites de temprature Verrouillage du clavier Format de lhorloge Heure dt/hiver Dcalage daffichage de la temprature/humidit intrieure Rglages et options Slectionnez la dure de maintien de la temprature durant une drogation : 1-10 heures ou pas de limite. Slectionnez Non pour lancer la rcupration lheure programme ou Oui pour lancer une rampe de temprature ascendante prcoce. Slectionnez Non pour lancer la rcupration lheure programme ou Oui pour lancer une rampe de temprature descendante prcoce. Slectionnez la limite de refroidissement minimum et la limite de chauffage maximum. Slectionnez Dverrouill/Partiellement verrouill/Verrouill. Slectionnez 12 heures ou 24 heures. Slectionnez Arrt ou Marche. Si le rglage est sur Marche, le systme passe automatiquement lheure dhiver/dt. Slectionnez le nombre de degrs de dcalage de la temprature intrieure ou le pourcentage de dcalage de lhumidit intrieure. 63 Modification de la configuration du systme Si vos besoins changent, vous pouvez modifier les rglages du systme de base du MENU choisis durant linstallation du thermostat (page 22). 1 Touchez MENU. Le thermostat affiche une liste doptions. 2 Slectionnez Configuration du systme. Le thermostat affiche le premier cran doptions que vous pouvez modifier. 3 Sur chaque cran, effectuez les modifications selon le besoin puis touchez Suivant pour afficher les nouvelles options. Rptez cette tape jusqu ce que tous les changements aient t effectus. Les tableaux aux pages 65-66 expliquent les crans et les options de configuration du systme. 4 Lorsque toutes les modifications ont t effectues, touchez Termin pour enregistrer et quitter. 64 Conf iguration du systme MENU Suivant Touchez le bouton Aide pour afficher les informations sur les options dcran. Modification de la configuration du systme Remarque : Touchez le bouton Aide orange sur nimporte quel cran pour obtenir plus dinformations. Options de configuration du systme (MENU > Configuration du systme) Titre de lcran Langue Thermostat install dans Lemplacement de votre thermostat Rglages et options English/Franais/Espaol. Rsidentielle/Commerciale (le thermostat est utilis pour une application rsidentielle (dfaut) ou commerciale). Touchez le bouton THERMOSTAT pour afficher un cran o vous pouvez entrer un nom personnalis en utilisant le clavier. Si vous navez quun thermostat, vous pouvez laisser le mot THERMOSTAT. Pour les installations commerciales, vous pouvez cocher une case pour afficher le nom dun thermostat sur lcran daccueil. Votre thermostat contrle Slectionnez Chauffage ou Refroidissement ou les deux (dfaut). Votre type de systme Votre type de systme de chauffage air puls Efficacit de votre systme de chauffage Votre type de systme de chauffage Slectionnez air puls (dfaut), thermopompe, eau chaude ou vapeur. Chaque option offre diffrents choix sur les crans suivants. Voir ltape 9e dans la section Installation du thermostat la page 23. Slectionnez le type de systme air puls : gaz/mazout (dfaut) ou lectrique Slectionnez Air puls efficacit standard (dfaut) ou Air puls haute efficacit. Si vous avez slectionn Eau chaude ou Vapeur sur Votre type de systme, slectionnez le systme de chauffage spcifique ici. 65 Modification de la configuration du systme Options de configuration du systme (fin) Titre de lcran Nombre dtages de refroidissement Nombre dtages de chauffage Votre rgulateur de ventilateur Type de vanne de commutation Nombre dtages du compresseur de la thermopompe Votre chauffage de secours Rglages et options Slectionnez 1 tage (dfaut) ou 2 tages. Si vous ntes pas sr, notez les fils que vous avez connects. Fil Y uniquement (1 tage) ou Y et Y2 (consultez votre liste de vrification ltape 6 la page 12). Slectionnez 1 tage (dfaut) ou 2 tages. Si vous ntes pas sr, notez les fils que vous avez connects. Fil W uniquement (1 tage) ou W et W2 (consultez votre liste de vrification ltape 6 la page 12). Slectionnez si votre thermostat (dfaut) ou votre systme de chauffage contrle le ventilateur. Si vous slectionnez Thermopompe sur Votre type de systme , slectionnez si une vanne de commutation de refroidissement
(dfaut) ou de chauffage est utilise. Si vous ntes pas sr, notez les fils que vous avez connects : consultez votre liste de vrification ltape 6 la page 14. Slectionnez 1 tage (dfaut) ou 2 tages. Si vous ntes pas sr, notez les fils que vous avez connects. Fil Y uniquement (1 tage) ou Y et Y2 (consultez votre liste de vrification ltape 6 la page 14). Non ou Oui (dfaut) vous pouvez dterminer si vous avez un chauffage de secours en consultant votre liste de vrification ltape 6 la page 14. 66 Foire aux questions
:Q Mon thermostat fonctionnera-t-il toujours si je perds ma connexion Wi-Fi?
:R Oui, le thermostat actionnera votre systme de chauffage et/ou de refroidissement avec ou sans Wi-Fi.
:Q Comment puis-je trouver le mot de passe de mon routeur?
:R Contactez le fabriquant du routeur ou vrifiez la documentation du routeur.
:Q Pourquoi ne vois-je pas ma page de configuration Wi-Fi?
:R Vous tes probablement uniquement connect votre routeur, et non pas votre thermostat. Essayez de vous reconnecter au thermostat.
:Q Pourquoi mon thermostat ne se connecte-t-il pas mon routeur Wi-Fi mme si celui-ci est trs proche du thermostat?
:R Vrifiez que le mot de passe saisi pour le routeur Wi-Fi est correct.
:Q Il est impossible denregistrer mon thermostat sur le site Total Connect Comfort.
:R Vrifiez que le thermostat est correctement enregistr dans le rseau Wi-Fi rsidentiel. Dans Menu > Configuration Wi-Fi, vrifiez licne de puissance du signal Wi-Fi. Vrifiez que le routeur Wi-Fi dispose dune bonne connexion Internet. Sur 67 Foire aux questions votre ordinateur, vrifiez que vous pouvez ouvrir le site sur mytotalconnectcomfort. com. Si ce nest pas le cas, teignez le modem pendant quelques secondes, puis rallumez-le.
:Q Je suis enregistr sur le site Total Connect Comfort mais je nai pas pu ouvrir de session en utilisant mon nouveau compte.
:R Consultez votre messagerie et vrifiez que vous avez reu le message dactivation. Suivez les instructions dactivation de votre compte, puis ouvrez une session sur le site web.
:Q Je me suis enregistr sur le site Total Connect Comfort et nai pas reu de message de confirmation.
:R Vrifiez que le message ne se trouve pas dans le dossier des pourriels ou des messages effacs.
:Q Y a-t-il un moyen daccrotre la force du signal?
:R La plupart des routeurs standard peuvent tre configurs comme rpteur. Vous pouvez galement acheter et installer un rpteur Wi-Fi. Pour plus de questions frquemment poses, consultez le site wifithermostat.com 68 Obtenir de laide et rpondre aux alertes Votre thermostat offre deux types dassistance. Si ces options dassistance ne rpondent pas vos questions, consultez la foire aux questions (pages 67-68) et les conseils de dpannage
(pages 71-72). Aide sur cran La plupart des crans comprennent un bouton Aide orange. 1 Touchez Aide pour afficher les instructions dutilisation de lcran. 2 Touchez OK pour afficher de nouveau lcran dorigine. Aide OK 69 Obtenir de laide et rpondre aux alertes Alertes lcran Votre cran daccueil affichera un gros bouton orange lorsque vous devrez corriger un rglage ou un problme avec le systme. 1 Touchez le bouton, le thermostat affichera les instructions ncessaires pour complter la tche pour laquelle vous avez t alert. 2 Touchez OK sur lcran dinstructions, puis effectuez la tche. Lorsque la tche est complte, le bouton dalerte disparatra. Remplacez le ltre air Appuyez pour info OK 70 Dpannage En cas de difficults avec le thermostat, essayez les suggestions suivantes. La plupart des problmes peuvent tre rgls rapidement et facilement. Rien napparat lcran Vrifiez le disjoncteur et rinitialisez-le si ncessaire. Assurez-vous que linterrupteur de marche-arrt du systme de chauffage et de refroidissement est sur marche. Assurez-vous que la porte de lappareil de chauffage est bien ferme. Vrifiez que le fil C est connect (voir page 11). Vrifiez que Votre thermostat contrle ou Votre type de systme sur lcran Configuration du systme est rgl en fonction de votre quipement de chauffage et de refroidissement (voir la page 65). Vrifiez que Votre ventilateur contrle sur lcran Configuration du systme est rgl en fonction de votre quipement de chauffage (voir la page 66). La fonction de protection du compresseur est active. Attendez 5 minutes que le systme se remette en marche en toute scurit sans endommager le compresseur. Impossible de changer le rglage du systme Refroidissement Le ventilateur ne tourne pas lorsque le chauffage est requis Patientez apparat lcran 71 Dpannage La thermopompe met de lair frais en mode chauffage, ou de lair chaud en mode refroidissement Le systme de chauffage ou de refroidissement ne rpond pas Le systme de chauffage fonctionne en mode refroidissement Vrifiez le rglage de lcran 2060 de configuration du systme : la vanne de commutation de thermopompe doit tre configure en fonction de votre systme (voir page 66). Touchez SYSTME pour rgler le systme sur Chauffage. Vrifiez que le rglage de temprature est suprieur la temprature intrieure. Touchez SYSTME pour rgler le systme sur Refroidissement. Vrifiez que le rglage de temprature est infrieur la temprature intrieure. Vrifiez le disjoncteur et rinitialisez-le si ncessaire. Assurez-vous que linterrupteur de marche-arrt du systme de chauffage et de refroidissement est sur marche. Assurez-vous que la porte de lappareil de chauffage est bien ferme. Si Patientez saffiche, la minuterie de protection du compresseur est active. Attendez 5 minutes que le systme se remette en marche en toute scurit sans endommager le compresseur (voir page 59). Vrifiez que Votre thermostat contrle ou Votre type de systme sur lcran Configuration du systme est rgl en fonction de votre quipement de chauffage et de refroidissement (voir Options de configuration du systme (MENU > Configuration du systme) la page 65). 72 Glossaire Fil C Le fil C, ou neutre, amne lalimentation 24 V c.a. au thermostat partir du systme de chauffage/refroidissement. Certains anciens thermostats mcaniques ou pile peuvent ne pas tre dots de ce fil. Il est ncessaire ltablissement dune connexion Wi-Fi votre rseau domestique. Systme de chauffage/refroidissement thermopompe Des thermopompes sont utilises pour chauffer et refroidir une rsidence. Si votre ancien thermostat comporte un rglage pour chauffage auxiliaire ou durgence, vous avez probablement une thermopompe. Systme de chauffage/refroidissement conventionnel Systmes sans thermopompe; ceux-ci incluent des appareils de traitement dair, des chaudires ou des chauffe-eau qui fonctionnent au gaz naturel, au mazout ou llectricit. Ils peuvent ou non inclure un appareil de conditionnement dair. Boucle de raccordement Dans ce thermostat, une fiche avec fil en boucle situe sous le bornier est utilise pour connecter les bornes R et Rc. MAC ID, MAC CRC Codes alphanumriques identifiant de manire unique votre thermostat. QR Code Code de rponse rapide. Une image bidimensionnelle ordinolingue. Votre appareil sans fil peut lire le motif noir et blanc insr dans le carr et connecter directement son navigateur un site Web. QR Code est une marque dpose de DENSO WAVE INCORPORATED. 73 Informations rglementaires Dclaration de conformit la FCC (Partie 15.19) (tats-
Unis uniquement) Cet appareil est conforme la partie 15 du rglement de la FCC. Son fonctionnement est soumis aux deux conditions suivantes :
1 Ce dispositif ne doit pas causer dinterfrences nuisibles, et 2 Ce dispositif doit accepter toutes les interfrences reues, y compris celles pouvant causer un fonctionnement non souhait. Avertissement de la FCC (Partie 15.21) (tats-Unis uniquement) Toute modification qui nest pas autorise expressment par la partie responsable de la conformit de lappareil peut rendre lutilisateur inapte faire fonctionner lquipement. Dclaration relative aux interfrences de la FCC (Partie 15.105 (b)) (tats-Unis uniquement) Cet quipement a t test et est conforme aux limites des dispositifs numriques de Classe B, conformment la Partie 15 du rglement de la FCC. Ces limites sont conues pour fournir une protection raisonnable contre les interfrences nuisibles dans une installation rsidentielle. Cet quipement gnre, utilise et peut mettre de lnergie de radiofrquence, et sil nest pas install et utilis conformment aux instructions, peut causer des interfrences nuisibles aux communications radio. Il ny a toutefois aucune garantie quune interfrence ne se produira pas dans une installation particulire. Si cet quipement cause des interfrences nuisibles la rception radio et tlvision, ce qui peut tre dtermin en teignant le dispositif et en le remettant en marche, il est recommand lutilisateur de tenter de corriger linterfrence par lune des mesures suivantes :
Rorientez ou dplacez lantenne rceptrice. Augmentez la sparation entre lquipement et le rcepteur. Branchez lquipement dans la prise dun circuit diffrent de 74 celui auquel le rcepteur est connect. Consultez le distributeur ou un technicien radio/TV comptent pour obtenir de laide. Module dinterface dquipement, thermostats et capteur extrieur Pour tre conformes aux limites dexposition aux radiofrquences tablies par FCC et Industrie Canada pour le grand public/lexposition non contrle, la ou les antennes utilises pour ces transmetteurs doivent tre installes au moins 20 cm de toutes les personnes et ne peuvent tre situes au mme endroit quune autre antenne ou fonctionner conjointement avec une autre antenne ou un autre transmetteur. Rgulateur de confort portatif Ce transmetteur portable et son antenne sont conformes aux limites dexposition RF de la FCC et dIndustrie Canada pour la population gnrale/lexposition non contrle. Le dispositif ne doit pas tre situ ou utilis avec une autre antenne ou un autre transmetteur. Section 7.1.2 de RSS-GEN Conformment aux normes dIndustrie Canada, ce transmetteur radio ne peut fonctionner quavec une antenne dont le type et le gain maximum sont approuvs par Industrie Canada. Pour rduire les risques dinterfrences radio encourus par dautres utilisateurs, le type et le gain de lantenne doivent tre choisis de faon ce que la puissance rayonne isotrope quivalente (p i r.e.) ne soit pas suprieure celle ncessaire ltablissement dune bonne communication. Section 7.1.3 de RSS-GEN Son fonctionnement est soumis aux deux conditions suivantes :
1 Ce dispositif ne doit pas causer dinterfrences, et 2 Ce dispositif doit accepter toutes les interfrences, y compris celles pouvant causer un fonctionnement non souhait. Garantie limite dun an Honeywell garantit ce produit, lexception des piles, contre tout dfaut de pice ou de main-duvre, durant une priode dun (1) an partir de la date dachat par le consommateur si le produit est utilis et entretenu convenablement. En cas de dfaillance ou de mauvais fonctionnement pendant la priode de garantie, Honeywell remplacera ou rparera le produit, sa discrtion. Si le produit est dfectueux,
(i) renvoyez-le avec la facture ou une autre preuve dachat date au lieu dachat; ou
(ii) appelez le service la clientle de Honeywell en composant le 1-855-733-5465. Le service la clientle dterminera si le produit doit tre retourn ladresse suivante : Honeywell Return Goods, Dock 4MN10-3860, 1885 Douglas Dr. N., Golden Valley, MN 55422, ou si un produit de remplacement peut vous tre expdi. La prsente garantie ne couvre pas les frais de retrait ou de rinstallation. La prsente garantie ne sapplique pas sil est dmontr par Honeywell que la dfaillance ou le mauvais fonctionnement sont dus un endommagement du produit alors que le consommateur lavait en sa possession. La responsabilit exclusive de Honeywell se limite rparer ou remplacer le produit conformment aux modalits susmentionnes. HONEYWELL NEST EN AUCUN CAS RESPONSABLE DES PERTES OU DOMMAGES, Y COMPRIS LES DOMMAGES INDIRECTS OU ACCESSOIRES DCOULANT DIRECTEMENT OU INDIRECTEMENT DUNE VIOLATION QUELCONQUE DUNE GARANTIE, EXPRESSE OU TACITE, APPLICABLE AU PRSENT PRODUIT, OU TOUTE AUTRE DFAILLANCE DU PRSENT PRODUIT. Certaines provinces ne permettent pas lexclusion ou la restriction des dommages indirects ou accessoires et, par consquent, la prsente restriction peut ne pas sappliquer. CETTE GARANTIE EST LA SEULE GARANTIE EXPRESSE FAITE PAR HONEYWELL POUR CE PRODUIT. LA DURE DE TOUTE GARANTIE IMPLICITE, INCLUANT LES GARANTIES DE QUALIT MARCHANDE OU DADAPTATION UNE UTILISATION PARTICULIRE, EST LIMITE PAR LES PRSENTES LA PRIODE DUNE ANNE DE LA PRSENTE GARANTIE. Certaines provinces ne permettent pas de limiter la dure des garanties tacites et, par consquent, la prsente limitation peut ne pas sappliquer. La prsente garantie donne au consommateur des droits spcifiques et certains autres droits qui peuvent varier dune province lautre. Pour toute question concernant la prsente garantie, prire dcrire aux Services la clientle de Honeywell ladresse suivante : Honeywell Customer Relations, 1985 Douglas Dr, Golden Valley, MN 55422 ou composer le 1-855-733-5465. Au Canada, prire de sadresser au service des Produits de dtail, Honeywell Limited/Honeywell Limite, 35 Dynamic Drive, Toronto, Ontario M1V4Z9. 75 Systmes dautomatisation et de rgulation Honeywell International Inc. 1985 Douglas Drive North Golden Valley, MN 55422 wifithermostat.com Marque de commerce dpose amricaine. Apple, iPhone, iPad, iPod touch et iTunes sont des marques de commerce de Apple Inc. Toutes les autres marques de commerce sont proprit de leurs propritaires respectifs. 2013 Honeywell International Inc. 69-2790EF01 CNG 03-13 Imprim aux tats-Unis 69-2790EF-01
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2013-06-11 | 2412 ~ 2462 | DTS - Digital Transmission System | Original Equipment |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 | Effective |
2013-06-11
|
||||
1 | Applicant's complete, legal business name |
Ademco Inc
|
||||
1 | FCC Registration Number (FRN) |
0004788345
|
||||
1 | Physical Address |
1985 Douglas Drive
|
||||
1 |
Golden Valley, Minnesota 55422-3922
|
|||||
1 |
United States
|
|||||
app s | TCB Information | |||||
1 | TCB Application Email Address |
d******@nwemc.com
|
||||
1 | TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
||||
app s | FCC ID | |||||
1 | Grantee Code |
HS9
|
||||
1 | Equipment Product Code |
RTH9590WF01
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 | Name |
P******** W******
|
||||
1 | Title |
Sr. Compliance Engr
|
||||
1 | Telephone Number |
763-9********
|
||||
1 | Fax Number |
763-9********
|
||||
1 |
P******@Honeywell.com
|
|||||
app s | Technical Contact | |||||
n/a | ||||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 | Equipment Class | DTS - Digital Transmission System | ||||
1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | RTH9590WF01 | ||||
1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 | Modular Equipment Type | Does not apply | ||||
1 | Purpose / Application is for | Original Equipment | ||||
1 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 | Grant Comments | Output power is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Installers and end-users must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. | ||||
1 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 | Firm Name |
Northwest EMC, Inc.
|
||||
1 | Name |
G****** K******
|
||||
1 | Telephone Number |
503-8********
|
||||
1 | Fax Number |
503-8********
|
||||
1 |
g******@nwemc.com
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15C | 2412.00000000 | 2462.00000000 | 0.0259900 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC