all | frequencies |
|
|
|
|
exhibits | applications |
---|---|---|---|---|---|---|---|
manual | photos | label |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 |
|
User Manual | Users Manual | 2.77 MiB | December 29 2021 / December 30 2021 | |||
1 |
|
Internal Photos | Internal Photos | 740.17 KiB | December 29 2021 / December 30 2021 | |||
1 |
|
External Photos | External Photos | 347.70 KiB | December 29 2021 / December 30 2021 | |||
1 |
|
Label | ID Label/Location Info | 307.02 KiB | December 29 2021 / December 30 2021 | |||
1 |
|
Cover Letter Detailing Reason for Filing | Cover Letter(s) | 104.49 KiB | December 29 2021 / December 30 2021 | |||
1 |
|
Focus Pro Device Variants | Cover Letter(s) | 131.13 KiB | December 29 2021 / December 30 2021 | |||
1 |
|
TH6320WF03- FCC Request for confidentiality | Cover Letter(s) | 84.76 KiB | December 29 2021 / December 30 2021 | |||
1 |
|
Test setup photos etr2101580-01 | Test Setup Photos | 2.36 MiB | December 29 2021 / December 30 2021 | |||
1 |
|
etr2101580-01 Part1 | Test Report | 4.99 MiB | December 29 2021 / December 30 2021 | |||
1 |
|
etr2101580-01 Part2 | Test Report | 4.56 MiB | December 29 2021 / December 30 2021 | |||
1 |
|
etr2101580-01 Part3 | Test Report | 4.98 MiB | December 29 2021 / December 30 2021 | |||
1 |
|
etr2101580-01 Part4 | Test Report | 4.46 MiB | December 29 2021 / December 30 2021 |
1 | User Manual | Users Manual | 2.77 MiB | December 29 2021 / December 30 2021 |
Find rebates: HoneywellHome.com/Rebates In the box you will find Thermostat Wallplate (attached to thermostat) Screws and anchors Quick Start Guide Thermostat ID Card Wire labels User Guide Quick Reference Card Input: 24 V~ @ 60 Hz, 1.0 A User GuideRead and save these instructions.For help please visit honeywellhome.comRTH6500WF Smart SeriesRTH65801006Programmable ThermostatHOLDM37771 Welcome Congratulations on your purchase of a Smart programmable thermostat. When registered to Total Connect Comfort, you can remotely monitor and control the heating and cooling system in your home or businessyou can stay connected to your comfort system wherever you go. Total Connect Comfort is the perfect solution if you travel frequently, own a vacation home, a business or manage an Investment property or if you are simply looking for peace of mind. Precautions and Warnings This thermostat works with common 24 volt systems such as forced air, hydronic, heat pump, oil, gas, and electric. It will not work with millivolt systems, such as a gas fireplace, or with 120/240 volt systems such as baseboard electric heat. MERCURY NOTICE: Do not place your old thermostat in the trash if it contains mercury in a sealed tube. Contact the Thermostat Recycling Corporation at www.thermostat-recycle.org or 1-800-238-8192 for information on how and where to properly and safely dispose of your old thermostat. NOTICE: To avoid possible compressor damage, do not run air conditioner if the outside temperature drops below 50F (10C). Need help?
Visit honeywellhome.com for assistance before returning the thermostat to the store. 69-2715EF07 ii Table of contents About your new thermostat Controls and Home screen quick reference ....................................................... 2 Preset energy-saving schedules ................... 2 Unregistering thermostat .............................. 16 Disconnecting Wi-Fi ......................................... 16 Special features................................................... 17 Setting functions and options ..................... 18 Installation Appendices Installing your thermostat ................................ 3 Connecting to your Wi-Fi network ............. 10 Registering your thermostat online .......... 12 Frequently asked questions .......................... 20 Troubleshooting .................................................. 21 Limited warranty ................................................. 24 Operation Setting the the time and day ........................ 14 Setting the fan ..................................................... 14 Selecting system mode ................................... 14 Adjusting program schedules ...................... 15 Overriding schedules temporarily ............. 15 Overriding schedules permanently ........... 15 Features of your thermostat With your new thermostat, you can:
Connect to the Internet to monitor and control your heating/cooling system View and change your heating/cooling system settings View and set temperature and schedules Receive alerts via email and get automatic upgrades Your new thermostat provides:
Smart Response Technology Compressor protection Heat/cool auto changeover 1 69-2715EF07 Controls and home screen quick reference Once your thermostat is installed, it will display the home screen. Portions of this display will change depending on how you are viewing it. Set up messages describe steps in the Wi-Fi set up process Wi-Fi status HOLD Temperature adjustment buttons Permanent override button M31586 Set clock, day, or schedule Select fan settings Select system mode Additional settings The screen lights when you press any button. It stays lit for 8 seconds after you complete changes. Preset energy-saving schedules This thermostat is pre-set with energy-saving program settings for four time periods. Using the default settings can reduce your heating/cooling expenses if used as directed. Savings may vary depending on geographic region and usage. To change the settings, see pages 15. Default Heat Settings Default Cool Settings WAKE 6:00 am LEAVE 8:00 am RETURN 6:00 pm SLEEP 10:00 pm 70 62 70 62 78 85 78 82 69-2715EF07 2 Setting up your thermostat Setting up your programmable thermostat is easy. It is preprogrammed and ready to go as soon as it is installed and registered. 1 2 3 Install your thermostat. Connect your home Wi-Fi network. Register online for remote access. Before you begin, you may want to watch a brief installation video. Use the QR Code at the front of this guide, or go to honeywellhome.com/support Installing your thermostat You might need the following tools to install this thermostat:
No. 2 Phillips screwdriver Small pocket screwdriver Pencil Level (optional) Drill and bits (3/16 for drywall, 7/32 for plaster) (optional) Hammer (optional) Electrical tape (optional) 1 Switch OFF power to your heating/cooling system. Important! To protect your equipment, switch OFF the power to your heating/cooling system at the breaker box or the system switch. or Circuit breaker box M31535 Heating/cooling system power switch 3 69-2715EF07 Installing your thermostat 2 Remove old thermostat faceplate and leave wires connected. 2a Take a picture of the wire connections for later reference. 2b If no wire is connected to a terminal labeled C or no C terminal exists on the old thermostat, view the Alternate Wiring videos at honeywellhome.com/wifi-thermostat Important! C wire is required and is the primary power source for your thermostat. Without a C wire, your thermostat will not power up. 3 Label wires. Do not label by wire color. Use the supplied sticky tags to label each wire as you disconnect it. Label wires according to the old thermostat terminal designations, not by wire color. Note: If no tag matches a wire terminal label, write the terminal label on a blank tag. 4 Remove wallplate. Remove the old wallplate from the wall after all wires have been labeled and disconnected. 5 Separate thermostat and its wallplate. On your new thermostat, grasp the finger holds on the top and bottom of the wallplate with one hand and the thermostat (front) with the other hand. Pull pieces apart. 69-2715EF07 4 If you have an older thermostat with a sealed mercury tube, turn to page ii for proper disposal instructions. Terminal designation MCR33823 C C C C Sticky tags Blank sticky tags Terminal designation MCR31537 Finger holds Thermostat PULL HERE TO REMOVE PULL HERE TO REMOVE M33856 Wallplate (back view) Installing your thermostat 6 Mount wallplate for thermostat. Mount your new wallplate using screws and anchors included with the thermostat. Wallplate If necessary:
Drill 3/16-in holes for drywall. Drill 7/32-in holes for plaster. Note: You may be able to use your existing wall anchors. Hold the wallplate up to the existing anchors to check for alignment MCR33857 Important! The thermostat requires a C wire to operate. The C, or common, wire brings 24 VAC power to the thermostat. Many older mechanical or battery operated thermostats do not require a C wire. If you dont have a C wire, try:
Looking for an unused wire that is pushed into the wall. Connect that wire to C and check that it is connected to the 24 VAC common at your heating/cooling system. Note: Not all heating/cooling systems label the 24 VAC common C. Check your system manual or contact the manufacturer to find out which terminal is the 24 VAC common. View the Alternate Wiring videos at honeywellhome.com/wifi-thermostat Wiring For conventional heating/cooling systems (natural gas, oil or electric furnace, air conditioner), see page 5. See Glossary on page 23 for further definition. For a heat pump system, see page 7. See Glossary on page 23 for further definition. Wiring (conventional system) 7A Wire the thermostat to your conventional system. a Starting with the C Wire, match the sticky tag on the wire to the terminal labels. Remove metal jumper only if you have both R and RC wires You must have a C wire. b Loosen screw, insert wire on inside edge of terminal, then tighten screw. c Verify wire is firmly secured by gently pulling on wire. d Repeat steps ac for all other wires. e Push any excess wire back into the wall opening after all wires are installed. f Continue to page 8. Labels dont match? See alternate wiring key on pages 6. G W C C Y R Y R RC K Y2 W2 G W CONVENTIONAL K L AUX/E G O/B C Y R RC HEAT PUMP MCR33878 Note: The wiring for your application might be different from the shown above. 5 69-2715EF07 Installing your thermostat Wiring (heat pump system only) 7B Wire thermostat to your heat pump. Labels dont match? See alternate wiring key on pages 7. a Starting with the C Wire, match the sticky tag on the wire to the terminal labels. You must have a C wire. b Loosen screw, insert wire on inside edge of terminal, then tighten screw. c Verify wire is firmly secured by gently pulling on wire. d Repeat steps ac for all other wires. e Push any excess wire back into the wall opening after all wires are installed. f Continue to page 8. Note: If old thermostat has separate wires on AUX and E, place both wires into the E/AUX terminal. If old thermostat has wire on AUX with a jumper to E, place wire on E/AUX terminal. No jumper is required. Alternate wiring (conventional system) Use this if your wire labels dont match the terminal labels. Note: You must have a C wire or equivalent. Y2 W2 WG C 2 RY RC R F W1 H Y1 M X B C1 RH 4 V G O Y R Aux K L AUX/E G O/B C Y R RC HEAT PUMP MCR33877 Note: The wiring for your application might be different from the wiring shown above. 1 K Y2 W2 G W C Y R RC CONVENTIONAL 3 MCR33885 Alternate wiring key (conventional system) Do not use K terminal. For future use. If your old thermostat had both R and RH wires, remove metal jumper. Connect the R wire to the RC terminal, and the RH wire to the R terminal. Remove metal jumper connecting R and RC only if you must connect both R and RC. 1 2 3 69-2715EF07 6 Installing your thermostat Alternate wiring (heat pump system only) Use this if your wire labels dont match the terminal labels. Note: You must have a C wire or equivalent. See page 6. 2 L E AUX F X X2 W W1 W2 G F 1 3 4 O H B 4 C X B 5 Y 6 R Y1 M V VR RC R 7 K L AUX/E G O/B C Y R RC HEAT PUMP MCR33886 Alternate wiring key (heat pump system only) 1 2 3 4 5 6 7 Do not use K terminal. For future use. If old thermostat has separate wires on AUX and E, place both wires into the E/AUX terminal. If old thermostat has wire on AUX with a jumper to E, place wire on E/AUX terminal. No jumper is required. If your old thermostat had an O wire and not a B wire, attach the O wire to the O/B terminal. If your old thermostat had separate O and B wires, attach the B wire to the C terminal. If another wire is attached to the C terminal, check honeywellhome.com for help. Attach the O wire to the O/B terminal. If your old thermostat had separate Y1, W1 and W2 wires, check honeywellhome.com for help. If your old thermostat had both V and VR wires, check honeywellhome.com for help. Leave metal jumper between R and RC terminals in place. 7 69-2715EF07 Installing your thermostat 8 Insert quick reference card. Fold quick reference card along score lines, and slide it into the slot on the back of the thermostat. 9 Attach thermostat to wallplate. Align the thermostat to the wallplate and then snap into place. 10 Switch heating/cooling system ON. Important!
10a Verify that the C wire is connected at the thermostat and at the heating/cooling system. 10b Make sure the heating/cooling system door is firmly secured. 10c Switch power back ON for your heating/cooling system at the breaker box or its power switch. 69-2715EF07 8 Quick reference card MCR33916 Back of thermostat MCR33858 HOLD M33860 or Circuit breaker box M31544 Heating/
cooling system power switch Installing your thermostat 11 Set clock to current day and time. 11a Press s or t to set clock. 11b Press Set Day. 11c Press s or t to select the day of week. 11d Press Done to save.
(Press and hold a st button to quickly change a setting.) MCR33908 HOLD HOLD MCR33909 12 Determine your heating/cooling system type. Important! Heating/cooling system type must be set so that your thermostat operates properly and does not damage your system. 12a If your system type is conventional single stage (natural gas-powered single stage with a/c), continue to Connecting to your Wi-Fi network on page 10. 12b If your system is:
Conventional multistage heat and cool Any type of heat pump Hydronic Other If you are not sure of your heating/cooling system type or have other questions, go to honeywellhome.com/support You MUST change the system type by setting system function 1. See page 18 to match your thermostat to your system type. Congratulations! Your thermostat is operational. 13 Test your thermostat 13a Press the System button to change to heating or cooling and begin operation. 13b For remote access to your thermostat, continue to Connecting to your Wi-Fi network on page 10. MCR33880 Heating/cooling system not turning on? Refer to page 20 or FAQ at honeywellhome.com/
support 9 69-2715EF07 Connecting to your Wi-Fi network To complete this process, you must have a wireless device connected to your home wireless network. Any of these device types will work:
Tablet (recommended) Laptop (recommended) Smartphone If you get stuck... at any point in this procedure, restart the thermostat by removing the thermostat from the wallplate, wait for 10 seconds, and snap it back onto the wallplate. Go to Step 1 in this procedure. View the Wi-Fi Enrollment video at honeywellhome.com/wifi-thermostat 1 Connect to your thermostat. 1a Make sure the thermostat displays Wi-Fi Setup. 1b On the wireless device (laptop, tablet, smartphone), view the list of available Wi-Fi networks. 1c Connect to the network called NewThermostat_123456 (the number will vary). Note: If you are asked to specify a home, public, or office network, select Home Network. 2 Join your home network. 2a Open your web browser to access the Thermostat Wi-Fi Setup page. The browser should automatically direct you to the correct page; if it does not, go to http://192.168.1.1 2b Find the name of your home network on this page and select it. Note: Some routers have enhanced features such as guest networks; use your home network. 2c Complete the instructions for joining your Wi-Fi network and click on the Connect button. (Depending on your network setup, you may see an instruction such as Enter Password for your home network.) Note: If you did not correctly connect to the thermostat, you may see your home router page. If so, return to Step 1. 69-2715EF07 10 HOLD M33852 7 6 5 1 3 M Connecting to your Wi-Fi network Note: If your Wi-Fi network does not appear in the list on the Thermostat Wi-Fi Setup page:
Try performing a network rescan by pressing the Rescan button. This is helpful in areas with a lot of networks. If you are connecting to a hidden network, then enter the network SSID in the textbox, select the encryption type from the drop down menu, and click on the Add button. This manually adds the network to the top of the list. Click on the new network in the list and enter the password if necessary. Click on Connect to join the network. 3 Make sure your thermostat is connected. While the connection is in process, your thermostat will flash Wait for up to 3 minutes. When the connection is complete, the display will show Wi-Fi Setup Connection Success. The Wi-Fi signal strength will appear in the top-right corner. After about 60 seconds, the home screen will appear and Register at Total Connect will flash until registration is complete. If you dont see these messages, see page 10. To register online for remote access to your thermostat continue on page 12. Note: If the thermostat displays Connection Failure or continues to display Wi-Fi Setup, confirm you correctly entered your home network password in step 2. If correct, refer to the FAQ at honeywellhome.com/support M33875 M33876 11 69-2715EF07 Registering your thermostat online To view and set your thermostat remotely, you must have a Total Connect Comfort account. Use the following steps. 1 Open the Total Connect Comfort web site. Go to mytotalconnectcomfort.com View the Thermostat Registration video at honeywellhome.com/wifi-thermostat 2 Login or create an account. If you have an account, click Login or click Create An Account. 2a Follow the instructions on the screen. 2b Check your email for an activation message from My Total Connect Comfort. This may take several minutes. Note: If you do not receive a response, check your junk mailbox or use an alternate e-mail address. 2c Follow activation instructions in the email. 2d Log in. 0 7 5 1 3 M 1 7 5 1 3 M 3 Register your thermostat. After you are logged in to your Total Connect Comfort account, register your thermostat. 3a Follow the instructions on the screen. After adding your thermostat location, you must enter the thermostats unique identifiers:
MAC ID MAC CRC Note: These IDs are listed on the Thermostat ID Card included in the thermostat package. The IDs are not case sensitive. 69-2715EF07 12 Thermostat ID Card Use the MAC ID and CRC ID to register this product at mytotalconnectcomfort.com Carte didentification de thermostat Utilisez lidentification MAC et lidentification CRC pour enregistrer ce produit mytotalconnectcomfort.com Tarjeta de identificacin del termostato Utilice la identificacin MAC y la identificacin CRC para inscribir este producto en mytotalconnectcomfort.com Resideo Inc., 1985 Douglas Drive North, Golden Valley, MN 55422 www.resideo.com 2018 Resideo Technologies, Inc. All rights reserved. The Honeywell Home logo is used under license from Honeywell International Inc. 69-2723EFS03 M.S. Rev. 12-18 Printed in U.S.A. 69-2723EFS-03 MAC ID MAC CRC Registering your thermostat online 3b When the thermostat is successfully registered, the Total Connect Comfort registration screen will display a SUCCESS message. In the thermostat display, you will see Setup Complete for about 90 seconds. 3c Also notice that your thermostat displays its signal strength. Congratulations! Youre done. You can now control your thermostat from anywhere through your tablet, laptop, or smartphone 72 Total Connect Comfort free app is available for Apple iPhone, iPad and iPod touch devices at iTunes or at Google Play for all Android devices. GET IT ON Search for local rebates Your thermostat may now be eligible for local rebates. Search for offers in your area at HoneywellHome.com/Rebates 13 69-2715EF07 Setting the time and day 1 Press Set Clock/Day/Schedule, then press s or t to set clock. 2 Press Set Day, then press s or t to select the day of week. 3 Press Done to save. Note: If the Set Clock/Day/Schedule option is not displayed, press Done. Note: If the display flashes Set Clock, the thermostat will follow your settings for the Monday Wake time period until you reset the time and day. Setting the fan Press Fan to select On or Auto (toggle to re-select). Auto: Fan runs only when the heating or cooling system is on. Auto is the most commonly used setting. On: Fan is always on. Note: Options may vary depending on your heating/cooling equipment. Selecting system mode Press System to select:
Heat: Controls only the heating system. Cool: Controls only the cooling system. Off: Heating/cooling systems are off. Auto: Selects heating or cooling depending on the indoor temperature. Em Heat (heat pumps with aux. heat):
Controls auxiliary/emergency heat. Compressor is off. 69-2715EF07 14 HOLD HOLD MCR33855 MCR33895 MCR33880 Note: Depending on how your thermostat was installed, you may not see all system settings. Adjusting program schedules 1 Press Set Clock/Day/Schedule, then Set Schedule. 2 Press s or t to set your Monday (Mon) Wake time, then press Next. 3 Press s or t to set the temperature for this period, then press Next. 4 Set time and temperature for the next time period (Leave). Repeat Steps 2 and 3 for each time period. 5 Press Next to set time periods for the next day. Repeat Steps 2 through 4 for each day. 6 Press Done to save and exit. Note: Make sure the thermostat is set to the system mode you want to program (Heat or Cool). Overriding schedules temporarily Press s or t to immediately adjust the temperature. The new temperature will be maintained only until the next programmed time period begins. To cancel the temporary setting at any time, press Cancel. The program schedule will resume. Overriding schedules permanently 1 Press HOLD to permanently adjust the temperature. This will turn off the program schedule. 2 Press s or t to adjust the temperature setting. The temperature you set will be maintained 24 hours a day until you manually change it or press Cancel to resume the program schedule MCR33892 HOLD MCR33896 HOLD MCR33897 15 69-2715EF07 Unregistering thermostat If you remove the thermostat from your Total Connect Comfort website account
(for example, youre moving and leaving the thermostat behind), the thermostat will display Register at Total Connect until it is re-registered. Disconnecting Wi-Fi Replacing your router If you disconnect the thermostat from your Wi-Fi network:
1 Enter system setup (see page 18). 2 Change setting 39 to 0 (see page 19). The screen will display Wi-Fi Setup. M33876 M33855 Re-connect to a Wi-Fi network by following the steps on page 10. Turning Wi-Fi off If you do not plan to control the thermostat remotely, you can remove the Wi-Fi Setup message from the screen:
1 Enter system setup (see page 18). 2 Change setting 38 to 0 (see page 19). Wi-Fi Setup will be removed from the screen. If you want to connect to the Wi-Fi network later, change setting 38 back to 1. Software updates Honeywell periodically issues updates to the software for this thermostat. The updates occur automatically through your Wi-Fi connection. All your settings are saved, so you will not need to make any changes after the update occurs. While the update is taking place, your thermostat screen flashes Updating and shows the percentage of the update that has occurred. When the update is complete, your home screen will appear as usual. Note: If you are not connected to Wi-Fi, you will not get automatic updates. 69-2715EF07 16 M34001 Percentage of update complete Smart Response Technology This feature allows the thermostat to learn how long the heating/cooling system takes to reach programmed temperature settings, so the temperature is reached at the time you set. For example: Set the Wake time to 6:00 am, and the temperature to 70. The heat will come on before 6:00 am, so the temperature is 70 by 6:00 am. Note: System setting function 13 controls Smart Response Technology. See Smart Response Technology on page 19. Compressor protection This feature forces the compressor to wait a few minutes before restarting, to prevent equipment damage. Auto changeover This feature is used in climates where both air conditioning and heating are used on the same day. When the system is set to Auto, the thermostat automatically selects heating or cooling depending on the indoor temperature. Heat and cool settings must be at least 3 degrees apart. The thermostat will automatically adjust settings to maintain this 3-degree separation. Note: System setting function 12 controls Auto changeover. See Manual/Auto Changeover on page 19. M33881 The message Recovery is displayed when the system is activated before a scheduled time period. M33882 The message Cool On (or Heat On for a heat pump) will flash during the wait time. MCR33893 17 69-2715EF07 Setting functions and options You can change options for a number of system functions. Available functions depend on the type of system you have. The functions, along with available options are described on pages 1819. This thermostat is pre-set for a single-stage heating/cooling system. Setting function 1 for a heat pump will adjust the default settings. 1 Press Fan and s simultaneously and hold for approximately 3 seconds. The screen will change to display two numbers and the button designations will be Done, Back, blank, Next. 2 Press Next until you see the function number the larger number on the leftyou want to set. 3 Change options for any function by pressing s or t until the correct option (smaller number on right) is displayed. 4 Repeat Steps 2 and 3 until you have set all functions that you wish to change. 5 When you have made all changes, press Done to save and exit. System setup Function Settings & Options HOLD MCR33883 HOLD MCR33884 1 2 3 Select System Type If you are not sure of your heating/
cooling system type or have other questions, go to honeywellhome. com 0 Heat/cool: Gas, oil or electric heating with central air conditioning. 1 Heat pump: Heat pump without backup or auxiliary heat. 2 Heat only: Gas, oil or hot water heat without central air conditioning. 3 Heat only with fan: Gas, oil or electric heat without central air conditioning. 4 Cool only: Central air conditioning only. 5 Heat pump: Heat pump with backup or auxiliary heating. 6 Heat/Cool Multiple stages: 2 heat stages (wires on W and W2), 2 cooling stages (wires on Y and Y2). 7 Heat/Cool Multiple stages: 2 heat stages (wires on W and W2), 1 Heat Pump Changeover Valve
(for heat pumps only) Heating Fan Control 8 Heat/Cool Multiple stages: 1 heat stage (wires on W), 2 cooling cooling stage (wire on Y). stages (wire on Y and Y2). 0 Cooling changeover valve: Use this setting if you connected a wire 1 Heating changeover valve: Use this setting if you connected a wire labeled O to the O/B terminal. labeled B to the O/B terminal. 0 Gas or oil heat: Use this setting if you have a gas or oil heating system
(system controls fan operation). 1 Electric heat: Use this setting if you have an electric heating system
(thermostat controls fan operation). 69-2715EF07 18 System setup Function Settings & Options 5 6 12 13 14 16 36 38 39 42 85 90 5 Gas or oil furnace: Standard gas/oil furnace (less than 90%
efficiency). 9 Electric furnace: Electric heating systems. 3 Hot water or high-efficiency furnace: Hot water system or gas furnace
(more than 90% efficiency). 1 Gas/oil steam or gravity system: Steam or gravity heat systems. 0 Manual changeover (Heat/Cool/Off). 1 Automatic changeover (Heat/Cool/Auto/Off). Automatically turns on Heat or Cool based on room temperature. Note: System maintains minimum 3F difference between heat and cool settings. Heating Cycle Rate Heating Cycle Rate Stage 2 Manual/Auto Changeover See page 17 for more information. Smart Response Technology See page 17 for more information. 1 On 0 Off Temperature For-
mat (F/C) 0 Fahrenheit 1 Celsius Schedule Options 1 Program schedule is on (7-day programmable). 0 Program schedule is off. Thermostat can not be programmed. Device Name This name will identify the thermostat when you view it remotely. If you register multiple thermostats, give each one a different name. 44 Porch 32 Lower Level 46 Sewing Room 33 Master Bath 47 Spa 52 = Thermostat 16 Exercise Room 30 Library 1 Basement 17 Family Room 31 Living Room 45 Rec Room 2 Bathroom 18 Fireplace 3 Bathroom 1 19 Foyer 4 Bathroom 2 20 Game Room 34 Master Bed 5 Bathroom 3 21 Garage 6 Bedroom 22 Great Room 7 Bedroom 1 23 Guest Room 37 Nursery 8 Bedroom 2 24 Gym 9 Bedroom 3 25 Kid's Room 10 Bedroom 4 26 Kitchen 11 Boat House 12 Bonus Room 27 Kitchen 1 13 Computer Room 28 Kitchen 2 14 Den 15 Dining Room 38 Office 39 Office 1 40 Office 2 41 Pantry 42 Play Room 56 Wine Cellar 35 Media Room 49 Studio 36 Music Room 50 Sun Room 29 Laundry Room 43 Pool Room 57 Workshop 51 Theater 52 Thermostat 53 Upper Level 54 Utility Room 55 Walk In Closet 48 Storage Room Wi-Fi On/Off 1 Wi-Fi is on and can be connected to a Wi-Fi network. 0 Wi-Fi is off. Thermostat cannot be connected to a Wi-Fi network. If you are not connecting the thermostat to a Wi-Fi network this will remove the text Wi-Fi Setup from the messaging center. Wi-Fi Connection 1 Connected to Wi-Fi network. This is set automatically when the Show period and day of week Restore Schedule Defaults Restore Original Settings thermostat is connected to the Wi-Fi network. 0 Set to 0 to disconnect from the Wi-Fi network. 0 Period and day are not shown on the home screen. 1 Period and day are shown on the home screen. 0 Continue using programmed schedule. 1 Restore thermostat program to energy saving settings 0 No 1 Disconnects thermostat from Wi-Fi and restores original settings
(erases customizations). 19 69-2715EF07 Frequently asked questions Q:Q Will my thermostat still work if I lose my Wi-Fi connection?
Q:A Yes, the thermostat will operate your heating and/or cooling system with or without Wi-Fi. Q:Q How do I find the password to my router?
Q:A Contact the manufacturer of the router or check the router documentation. Q:Q Why am I not seeing my Wi-Fi setup page?
Q:A You are probably connected only to your router, not to your thermostat. Try connecting to the thermostat again. thermostat?
Q:Q Why isnt my thermostat connecting to my Wi-Fi router even though it is very close to the Q:A Verify that the password entered for the Wi-Fi router is correct. Q:Q Where can I find my MAC ID and MAC CRC codes?
Q:A The MAC ID and MAC CRC numbers are included on a card packed with the thermostat or on the back of the thermostat (visible when removed from wallplate). Each thermostat has a unique MAC ID and MAC CRC. Q:Q My thermostat is unable to register to the Total Connect Comfort website. Q:A Verify that the thermostat is correctly enrolled on your home Wi-Fi network. The message center will display Wi-Fi Setup or Register at Total Connect. You might also see the Wi-Fi Signal strength icon. Verify that the Wi-Fi router has a good internet connection. On your computer, verify that you can open the site at mytotalconnectcomfort.com If you cannot open the site, switch off the internet modem for a few seconds, then power it back on. Q:Q I registered on the Total Connect Comfort website but was unable to login using my new account. Q:A Check your email and ensure that you received an activation email. Follow the instructions to activate your account and then login to the website. Q:Q I have signed up on the Total Connect Comfort website and have not received a confirmation email. Q:A Check for the email in your Junk or Deleted folder. Q:Q Is there a way to extend the signal strength?
Q:A Most standard routers can be set up to be a repeater. You can also purchase and install a Wi-Fi repeater. For more FAQs, see honeywellhome.com/support 69-2715EF07 20 Troubleshooting Lost Signal If the no-Wi-Fi indicator displays in place of the Wi-Fi strength indicator in the upper right hand corner of the home screen:
Check another device to be sure Wi-Fi is working in your home; if not, call your Internet Service Provider. Move the router. Restart the thermostat: remove it from the wallplate, wait 10 seconds, and snap it back onto the wallplate. Return to Step 1 of Connecting to your Wi-Fi network. Error Codes For certain problems, the thermostat screen will display a code that identifies the trouble. Initially, error codes are displayed alone in the time area of the screen; after a few minutes, the home screen is displayed and the code alternates with the time. Error Code Action E01 E02 During Wi-Fi Setup, the router lost power. Ensure your router has power. If trying to connect to a hidden or manually added network, confirm the router has power and is working. Invalid Wi-Fi password. This code displays for 30 seconds, then the thermostat will re-
enter Wi-Fi Setup mode. Re-enter password for your home Wi-Fi network. Repeat setup process and confirm your password for your home Wi-Fi network. Error Code Action E42 Router is not issuing an IP address to the thermostat. E43 No internet con-
nection. Thermostat cannot communicate to Total Connect Comfort. E99 General error Wait for 30 minutes, connection can take several minutes. If still no connection, remove thermostat from wallplate for 10 seconds, then reconnect it (see page 10). Verify your router is correctly setup to automatically give IP addresses. Make sure the Internet cable is plugged in. Reboot the router. Remove thermostat from wallplate for 10 seconds, then reconnect it (see page 10). 21 69-2715EF07 M33997 M33997 M33999 M33998 Troubleshooting If you have difficulty with your thermostat, please try the following suggestions. Most problems can be corrected quickly and easily. Display is blank Check circuit breaker and reset if necessary. Make sure power switch at heating and cooling system is on. Make sure furnace door is closed securely. Make sure C wire is connected (see page 6). Check Function 1: System Type to make sure it is set to match your heating and cooling equipment (see page 18). Cannot change system setting to Cool Fan does not turn on when heat is required Cool On or Heat On is flashing on the screen Heat pump issues cool air in heat mode, or warm air in cool mode Heating or cooling system does not respond Heating system is running in cool mode Heating and cooling equipment are running at the same time Check Function 3: Heating Fan Control to make sure it is set to match your heating equipment (see page 18). Compressor protection feature is engaged. Wait 5 minutes for the system to restart safely, without damage to the compressor. Check Function 2: Heat Pump Changeover Valve to make sure it is properly configured for your system (see page 18). Press System to set system to Heat. Make sure the temperature is set higher than the Inside temperature. Press System to set system to Cool. Make sure the temperature is set lower than the Inside temperature. Check circuit breaker and reset if necessary. Make sure power switch at heating & cooling system is on. Make sure furnace door is closed securely. Wait 5 minutes for the system to respond. Check Function 1: System Type to make sure it is set to match your heating and cooling equipment (see page 18). Check Function 1: System Type to make sure it is set to match your heating and cooling equipment (see page 18). Grasp and pull thermostat away from wallplate. Check to make sure bare wires are not touching each other. Check thermostat wiring is correct. 69-2715EF07 22 Glossary C wire The C or common wire brings 24 VAC power to the thermostat from the heating/cooling system. Some older mechanical or battery operated thermostats may not have this wire connection. It is necessary for establishing a Wi-Fi connection to your home network. Heat Pump heating/cooling system Heat pumps are used to heat and cool a home. If your old thermostat has a setting for auxiliary or emergency heat, you likely have a heat pump. Conventional heating/cooling system Nonheat pump type systems; these include air handlers, furnaces or boilers that run on natural gas, oil or electricity. They may or may not include an air conditioner. Jumper A small piece of wire that connects two terminals together. MAC ID, MAC CRC Alphanumeric codes that uniquely identify your thermostat. QR Code Quick response code. A two-dimensional,machine-readable image. Your wireless device can read the black and white pattern in the square and link its browser directly to a web site. QR Code is a registered trademark of DENSO WAVE INCORPORATED. Regulatory information FCC Compliance Statement (Part 15.19) (USA only) This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
1 This device may not cause harmful interference, and 2 This device must accept any interference received, including interference that may cause undesired operation. FCC Warning (Part 15.21) (USA only) Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. FCC Interference Statement (Part 15.105 (b))
(USA only) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Thermostats To comply with FCC and Industry Canada RF exposure limits for general population/ uncontrolled exposure, the antenna(s) used for these transmitters must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. RSS-GEN Under Industry Canada regulations, this radio transmitter may only operate using an antenna of type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication. Operation is subject to the following two conditions:
1 this device may not cause interference, and 2 this device must accept any interference, including interference that may cause undesired operation of the device. 23 69-2715EF07 1-year limited warranty Resideo warrants this product to be free from defects in workmanship or materials, under normal use and service, for a period of one (1) year from the date of first purchase by the original purchaser. If at any time during the warranty period the product is determined to be defective due to workmanship or materials, Resideo shall repair or replace it (at Resideos option). If the product is defective,
(i) return it, with a bill of sale or other dated proof of purchase, to the place from which you purchased it; or
(ii) call Resideo Customer Care at 1-800-633-3991. Customer Care will make the determination whether the product should be returned to the following address: Resideo Return Goods, 1985 Douglas Dr. N., Golden Valley, MN 55422, or whether a replacement product can be sent to you. This warranty does not cover removal or reinstallation costs. This warranty shall not apply if it is shown by Resideo that the defect was caused by damage which occurred while the product was in the possession of a consumer. Resideos sole responsibility shall be to repair or replace the product within the terms stated above. RESIDEO SHALL NOT BE LIABLE FOR ANY LOSS OR DAMAGE OF ANY KIND, INCLUDING ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING, DIRECTLY OR INDIRECTLY, FROM ANY BREACH OF ANY WARRANTY, EXPRESS OR IMPLIED, OR ANY OTHER FAILURE OF THIS PRODUCT. Some states do not allow the exclusion or limitation of incidental or consequential damages, so this limitation may not apply to you. THIS WARRANTY IS THE ONLY EXPRESS WARRANTY RESIDEO MAKES ON THIS PRODUCT. THE DURATION OF ANY IMPLIED WARRANTIES, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, IS HEREBY LIMITED TO THE ONE YEAR DURATION OF THIS WARRANTY. Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you. This warranty gives you specific legal rights, and you may have other rights which vary from state to state. If you have any questions concerning this warranty, please write Resideo Customer Care, 1985 Douglas Dr, Golden Valley, MN 55422 or call 1-800-633-3991. 69-2715EF07 24 Voltage (50/60Hz) Running Current 20-30 Vac 750 mV DC 0.02-1.0 A Electrical Ratings Terminal W Heating
(Powerpile) W2 (Aux/E) Heating Y Cooling Y2 Cooling G Fan O/B Changeover L Output 20-30 Vac 20-30 Vac 20-30 Vac 20-30 Vac 20-30 Vac 0.02-1.0 A 100 mA DC 20-30 Vac 0.02-1.0 A 0.02-1.0 A 0.02-0.5 A 0.02-0.5 A 0.02-0.5 A 25 69-2715EF07 33-00130EF-05Resideo Technologies Inc. 1985 Douglas Drive North, Golden Valley, MN 5542233-00130EF05 M.S. Rev. 06-20 | Printed in United Stateswww.resideo.com 2020 Resideo Technologies, Inc. All rights reserved.The Honeywell Home trademark is used under license from Honeywell International, Inc. This product is manufactured by Resideo Technologies, Inc. and its affiliates. Apple, iPhone, iPad, iPod touch and iTunes are trademarks of Apple Inc. All other trademarks are the property of their respective owners.Tous droits rservs. La marque de commerce Honeywell Home est utilise avec lautorisation dHoneywell International, Inc. Ce produit est fabriqu par Resideo Technologies, Inc. et ses socits affilies. Trouver des rabais : HoneywellHome.com/Rebates Vous trouverez dans la bote Thermostat Plaque murale (fixe au thermostat) Vis et ancres Guide de dmarrage rapide Carte didentification de thermostat tiquettes de fils Guide de lutilisateur Carte de rfrence rapide Entre : 24 V~ @ 60 Hz, 1.0 A HOLDM37771Veuillez lire le mode demploi et le conserver en lieu sr.Pour obtenir de laide veuillez visiter honeywellhome.comGuide de lutilisateurThermostat programmableRTH6500WF Srie intelligenteRTH65801006 Bienvenue Nous vous flicitons de lachat dun thermostat programmable intelligente. Aprs vous tre enregistr auprs du service Total Connect Comfort, vous pouvez surveiller et contrler distance le systme de chauffage et de refroidissement de votre domicile ou de votre entreprise vous pouvez rester connect votre service confort o que vous soyez. Le Total Connect Comfort est la solution parfaite si vous voyagez frquemment, possdez une maison de vacances ou une entreprise ou grez un immeuble de placement, ou si tout simplement vous recherchez la tranquillit desprit. Prcautions et avertissements Ce thermostat fonctionne sur les systmes de 24 V commun tels que les systmes air puls, eau chaude, thermopompe, mazout, gaz et lectriques. Il ne fonctionne pas avec les systmes mV, tels que les chemines gaz, ou avec les systmes de 120/240 V tels que les chauffages de plinthe. AVIS RELATIF AU MERCURE : Ne jetez pas lancien thermostat dans la poubelle sil contient du mercure dans un tube scell. Contactez la Thermostat Recycling Corporation ladresse www.thermostat-recycle.org ou appelez au 1-800-238-
8192 pour savoir comment et o mettre au rebut votre thermostat usag. AVIS : Pour viter dendommager le compresseur, ne faites pas fonctionner le climatiseur si la temprature extrieure est infrieure 10 C (50 F). Besoin daide?
Consultez le site honeywellhome.com pour obtenir de laide avant de renvoyer le thermostat au magasin. 69-2715EF07 ii Table des matires propos du nouveau thermostat Aide-mmoire sur les commandes et lcran daccueil ................................................ 2 Programmes dconomie dnergie prconfigurs ..................................... 2 Installation Installation de votre thermostat .................... 3 Connexion votre rseau Wi-Fi .................. 10 Enregistrement de votre thermostat en ligne .......................................... 12 Fonctionnement Setting the time and day ................................ 14 Rglage du ventilateur ................................... 14 Slection du mode de fonctionnement du systme ....................... 14 Rglage des programmes .............................. 15 Drogation temporaire de la programmation ........................................ 15 Drogation permanente de la programmation ........................................ 15 Annulation de lenregistrement du thermostat....................................................... 16 Dconnexion Wi-Fi ............................................ 16 Caractristiques spciales ............................ 17 Fonctions et options de configuration.... 18 Annexes Questions frquemment poses ................ 20 Dpannage ............................................................ 21 Garantie limite ................................................... 24 Caractristiques de votre thermostat Wi-Fi Avec votre nouveau thermostat, vous pouvez :
Vous connecter Internet pour surveiller et contrler votre systme de chauffage/refroidissement Consulter et modifier vos rglages du systme de chauffage/refroidissement Consulter et rgler la temprature et les programmes Recevoir des alertes par courrier lectronique et obtenir des mises jour automatiques Votre nouveau thermostat procure :
La technologie Smart Response Une protection du compresseur Une commutation automatique chaud/froid 1 69-2715EF07 Aide-mmoire sur les commandes et lcran daccueil Une fois votre thermostat install, il affichera lcran daccueil. Des parties de cet cran seront modifies en fonction de la manire dont vous le consultez. Les messages de configuration dcrivent les tapes du processus de configuration de la Wi-Fi Statut Wi-Fi HOLD Boutons de rglage de la temprature Bouton dannulation permanente M31586 Rgler lhorloge, le jour ou le programme Slectionner les paramtres du ventilateur Slectionner le mode de fonctionnement du systme Paramtres additionnels Lcran sallume lorsque vous appuyez sur un bouton. Il reste allum pendant 8 secondes aprs que vous avez apport les modifications. Programmes dconomie dnergie prconfigurs Ce thermostat contient des programmes dconomie dnergie prconfigurs pour quatre priodes. Lutilisation des rglages par dfaut peut vous permettre de rduire vos dpenses de chauffage/refroidissement si vous suivez les instructions indiques. Les conomies peuvent varier en fonction de la rgion gographique et de lusage. Pour modifier les rglages, voir pages 15. Rglages de chauffage par dfaut Rglages de refroidissement par dfaut WAKE (Rveil) 6h LEAVE (Dpart) 8h RETURN (Retour) 18h SLEEP (Coucher) 22h 70 62 70 62 78 85 78 82 69-2715EF07 2 Configuration de votre thermostat La configuration de votre thermostat programmable est aise. Il est prprogramm et prt fonctionner ds quil est install et enregistr. Installez votre thermostat. Connectez rseau sans fil de votre domicile. 1 2 3 Enregistrez-vous en ligne pour bnficier de laccs distance. Avant de commencer, vous dsirerez peut-tre visionner une courte vido dinstallation. Utilisez le QR Code figurant sur la couverture de ce guide ou consultez le site honeywellhome.com/support Installation de votre thermostat Vous aurez besoin des outils suivants pour linstallation de ce thermostat :
un marteau (optionnel) un ruban lectrique (optionnel) un tournevis Phillips n 2 un petit tournevis de poche un crayon un niveau (optionnel) une perceuse et des mches (3/16 po pour une cloison sche, 7/32 po pour du pltre) (optionnel) 1 Coupez lalimentation sur votre systme de chauffage/refroidissement. Important! Pour protger votre quipement, coupez lalimentation de votre systme de chauffage/
refroidissement au niveau du disjoncteur ou du commutateur du systme. ou Disjoncteur M31535 Interrupteur dalimentation du systme de chauffage/
refroidissement 3 69-2715EF07 Installation de votre thermostat Si vous possdez un thermostat plus ancien tube de mercure scell, allez la page 2 pour les instructions de mise au rebut correctes. 2 Retirez la plaque de lancien thermostat et laissez les fils connects. 2a Prenez une photo des connexions de cblage pour vous y rfrer plus tard. 2b Si aucun fil nest connect la borne C ou si aucune borne C nest prsente sur lancien thermostat, visionnez les vidos expliquant les autres cblages honeywellhome.com/wifi-thermostat Important! Le fil C est requis et reprsente la source dalimentation principale du thermostat. Sans fil C, votre thermostat ne se mettra pas en marche. 3 tiquetez les fils. Nappliquez pas les tiquettes en fonction des couleurs des fils. Utilisez les tiquettes autocollantes fournies pour tiqueter chaque fil lorsque vous le dconnectez. tiquetez les fils conformment aux dsignations de bornes de lancien thermostat et non pas en fonction des couleurs des fils. Remarque : si aucune tiquette ne correspond une rfrence de borne de fil, inscrivez la rfrence du fil sur une tiquette vierge. 4 Retirez la plaque murale. Retirez lancienne plaque murale du mur aprs avoir tiquet et dconnect tous les fils. 5 Sparez le thermostat de sa plaque murale. Sur votre nouveau thermostat, saisissez les alvoles du haut et du bas de la plaque murale dune main et tenez le thermostat (avant) dans lautre main. Sparez les deux pices. 69-2715EF07 4 Dsignation de la borne MCR33823 C C C C tiquette autocollante tiquette autocollante vierge Dsignation de la borne MCR31537 Alvoles Thermostat PULL HERE TO REMOVE PULL HERE TO REMOVE M33856 Plaque murale
(vue arrire) Installation de votre thermostat 6 Montez la plaque murale du thermostat. Montez votre nouvelle plaque murale laide des vis et ancres fournies avec le thermostat. Au besoin :
Percez des trous de 3/16 po (4,8 mm) pour les cloisons sches. Percez des trous de 7/32 po (5,6 mm) pour le pltre. Plaque murale Remarque : Vous pourrez peut-tre utiliser les ancres murales dj installes. Tenez la plaque murale sur les ancres dj installes pour vrifier lalignement. MCR33857 Important! le fonctionnement du thermostat requiert lutilisation dun fil neutre
(C). Le fil C, ou neutre, amne lalimentation 24 V ca au thermostat. De nombreux thermostats mcaniques ou piles plus anciens nont pas besoin dun fil C. Si vous ne disposez pas dun fil C, essayez :
de rechercher un fil inutilis enfonc dans le mur. Connectez ce fil au fil C et vrifiez sil est connect au fil C 24 V ca de votre systme de chauffage/refroidissement. Remarque : Tous les systmes de chauffage/refroidissement ne portent pas ltiquette 24 V c.a. commune C . Reportez-vous au manuel sur le systme ou communiquez avec le fabricant afin didentifier la borne 24 V c.a. commune. Visionnez les vidos expliquant les autres cblages honeywellhome.com/wifi-thermostat Cblage Pour les systmes de chauffage/refroidissement conventionnels (gaz naturel, appareil de chauffage mazout ou lectrique, climatiseur), voir page 5. Voir Glossaire la page 23 pour des dfinitions plus compltes. Pour un systme thermopompe, voir page 7. Voir Glossaire la page 23 pour des dfinitions plus compltes. Cblage (systme conventionnel) 7A Branchez le thermostat sur votre systme conventionnel. a En commenant par le fil C, faites correspondre ltiquette Retirez le cavalier mtallique si les fils R et RC sont tous deux prsents. autocollante sur le fil ltiquette de la borne. Vous devez disposer dun fil neutre (C). b Desserrez la vis, insrez le fil dans le bord intrieur de la borne et serrez la vis. c Vrifiez que le fil est bien attach en tirant dlicatement dessus. d Rptez les tapes ac pour tous les autres fils. e Poussez tout excdent de fil dans louverture mural une fois tous les fils installs. f Poursuivez la page 8. Les tiquettes ne correspondent pas? Reportez-
vous au code de cblage alternatif des pages 6. G W C C Y R Y R RC K Y2 W2 G W CONVENTIONNEL K L Y R RC AUX/E G O/B THERMOPOMPE MFCR33878 C Remarque : Le cblage de votre application spcifique peut tre diffrent du cblage illustr ci-avant. 5 69-2715EF07 Installation de votre thermostat Cblage (systme thermopompe uniquement) 7B Branchez le thermostat votre thermopompe. a En commenant par le fil C, faites correspondre ltiquette autocollante sur le fil ltiquette de la borne. Vous devez disposer dun fil neutre (C). b Desserrez la vis, insrez le fil dans le bord intrieur de la borne et serrez la vis. c Vrifiez que le fil est bien attach en tirant dlicatement dessus. d Rptez les tapes ac pour tous les autres fils. e Poussez tout excdent de fil dans louverture mural une fois tous les fils installs. f Poursuivez la page 8. Remarque : Si lancien thermostat est dot de fils distincts aux bornes AUX et E, reliez les deux fils la borne E/AUX. Si lancien thermostat est dot dun fil la borne AUX et dun cavalier la borne E, reliez le fil la borne E/AUX. Aucun cavalier nest requis. Les tiquettes ne correspondent pas? Reportez-
vous au code de cblage alternatif des pages 7. G O Y R Aux K L AUX/E G O/B C Y R RC THERMOPOMPE MFCR33877 Remarque : Le cblage de votre application spcifique peut tre diffrent du cblage illustr ci-avant. Cblage alternatif (systme conventionnel) Utilisez ceci si vos tiquettes de fils ne correspondent pas aux rfrences de bornes. Remarque : vous devez disposer dun fil C
(neutre) ou quivalent. Y2 W2 WG ou F ou W1 H 2 RY ou Y1 M ou RH 4 V C ou X B C1 RC ou R 1 K Y2 W2 G W C Y R RC CONVENTIONNEL 3 MFCR33885 Cblage alternatif (systme conventionnel) 1 2 3 Nutilisez pas la borne K. Pour une utilisation ultrieure. Si votre ancien thermostat est pourvu de deux fils R et RH, retirez le cavalier mtallique. Connectez le fil R la borne RC et le fil RH la borne R. Retirez le cavalier mtallique reliant R et RC uniquement si vous devez connecter la fois R et RC. 69-2715EF07 6 Installation de votre thermostat Cblage alternatif (systme thermopompe uniquement) Utilisez ceci si vos tiquettes de fils ne correspondent pas aux rfrences de bornes. Remarque : vous devez disposer dun fil C (neutre) ou quivalent. Voir page 6. L E AUX ou F ou X X2 G ou F 2 ou W W1 W2 1 3 4 O ou H B 4 C ou X B 5 Y ou Y1 M 6 R ou V VR RC ou R 7 K L AUX/E G O/B C Y R RC THERMOPOMPE MFCR33886 Code de cblage alternatif (systme thermopompe uniquement) 1 2 3 4 5 6 7 Nutilisez pas la borne K. Pour une utilisation ultrieure. Si lancien thermostat est dot de fils distincts aux bornes AUX et E, reliez les deux fils la borne E/AUX. Si lancien thermostat est dot dun fil la borne AUX et dun cavalier la borne E, reliez le fil la borne E/AUX. Aucun cavalier nest requis. Si votre ancien thermostat est pourvu dun fil O et pas dun fil B, fixez le fil O la borne O/B. Si votre ancien thermostat est pourvu de fils O et B spars, fixez le fil B la borne C. Si un autre fil est reli la borne C, consultez le site honeywellhome.com pour obtenir de laide. Reliez le fil O la borne O/B. Si votre ancien thermostat est pourvu de fils Y1, W1 et W2 consultez le site honeywellhome. com pour obtenir de laide. Si votre ancien thermostat est pourvu de deux fils V et VR, consultez le site honeywellhome.com pour obtenir de laide. Laissez le cavalier mtallique reliant les bornes R et RC en place. 7 69-2715EF07 Installation de votre thermostat 8 Insrez la carte de rfrence rapide. Pliez la carte de rfrence rapide le long des repres et glissez-la dans la fente larrire du thermostat. 9 Fixez le thermostat la plaque murale. Alignez le thermostat sur la plaque murale puis embotez-le. Carte de rfrence rapide MCR33916 Arrire du thermostat MCR33858 HOLD M33860 10 Mettez le systme de chauffage/
refroidissement en marche. Important!
10a Vrifiez que le fil C est branch sur le thermostat et le systme de chauffage/
refroidissement. 10b Assurez-vous que la porte du systme de chauffage/
refroidissement est bien ferme. 10c Rtablissez lalimentation du systme de chauffage/
refroidissement au niveau du disjoncteur ou de linterrupteur dalimentation. 69-2715EF07 8 Disjoncteur ou M31544 Interrupteur dalimentation du systme de chauffage/
refroidissement Installation de votre thermostat 11 Rglez lhorloge la date et lheure courantes. 11a Appuyez sur s ou t pour rgler lhorloge. 11b Appuyez sur Set Day (Rgler le jour). 11c Appuyez sur s ou t pour slectionner le jour de la semaine. 11d Appuyez sur Done (Termin) pour enregistrer les rglages.
(Appuyez sans relcher sur un bouton st pour modifier rapidement le rglage.) MCR33908 HOLD HOLD MCR33909 12 Dterminez le type de votre systme de chauffage/refroidissement. Important! Le type de systme de chauffage/refroidissement doit tre rgl de sorte que le thermostat fonctionne correctement et nendommage pas le systme. 12a Si votre systme est de type conventionnel tage unique (tage unique aliment au gaz naturel avec climatisation), passez Connexion votre rseau Wi-Fi la page 10. 12b Si le systme est de type :
Chauffage et refroidissement multi-tages conventionnel Tout type de thermopompe Systme eau chaude Autre Si vous ntes pas certain de votre type de systme de chauffage/
refroidissement ou avez dautres questions, consultez le site honeywellhome.com/
support Vous DEVEZ changer le type de systme en rglant la fonction du systme sur 1. Voir la page 18 pour faire correspondre votre thermostat votre type de systme. Flicitations! Votre thermostat est maintenant prt fonctionner 13 Testez votre thermostat 13a Appuyez sur le bouton System pour passer au chauffage ou au refroidissement et mettre lappareil en marche. 13b Pour accder distance votre thermostat, passez Connexion votre rseau Wi-Fi la page 10. MCR33880 Le systme de chauffage/
refroidissement ne sallume pas?
Consultez le page 20 ou la Foire aux questions honeywellhome.com/support 9 69-2715EF07 Connexion votre rseau Wi-Fi Pour excuter cette tape, vous devez avoir un appareil sans fil connect votre rseau sans fil. Tous ces types dappareils sont valables :
Tablette (recommand) Ordinateur portatif (recommand) Tlphone intelligent Si vous tes bloqu... tout moment dans cette procdure, redmarrez le thermostat en le retirant de la plaque murale, attendez 10 secondes, et embotez-le nouveau sur la plaque murale. Allez ltape 1 de cette procdure. Visionnez la vido denregistrement au rseau Wi-Fi honeywellhome.com/wifi-thermostat 1 Connectez votre thermostat. 1a Assurez-vous que le thermostat affiche Wi-Fi Setup (Configuration Wi-Fi). 1b Sur votre appareil sans fil (tablette, ordinateur portatif, tlphone intelligent), consultez la liste des rseaux sans fil disponibles. 1c Connectez-vous au rseau appel NewThermostat_123456 (le chiffre variera). Remarque : sil vous est demand de spcifier un rseau domestique, publique ou de bureau, slectionnez Rseau domestique. HOLD M33852 2 Joignez votre rseau domestique. 2a Ouvrez votre navigateur Web pour accder la page de configuration Wi-Fi du thermostat. Le navigateur devrait automatiquement vous diriger vers la page correcte; sil ne le fait pas, entrez ladresse http://192.168.1.1 2b Trouvez le nom de votre rseau domestique sur cette page et slectionnez-le. Remarque : Certains routeurs ont des caractristiques amliores tels que les rseaux invits; utilisez votre rseau domestique. 2c Suivrez les instructions denregistrement votre rseau Wi-Fi et cliquez sur le bouton Connect
(Connexion). (En fonction de la configuration de votre rseau, vous verrez peut-tre une instruction vous demandant dentrer le mot de passe de votre rseau domestique.) 7 6 5 1 3 M Remarque : Si vous navez pas correctement branch le thermostat, la page du routeur domestique saffichera peut-tre. Si cest le cas, revenez ltape 1. 69-2715EF07 10 Connexion votre rseau Wi-Fi Remarque : Si votre rseau Wi-Fi napparat pas dans la liste de la page de configuration Wi-Fi du thermostat :
Essayez de scanner le rseau nouveau en appuyant sur le bouton Rescan
(nouveau balayage). Ceci est utile dans les endroits avec plusieurs rseaux. Si vous tes connect un rseau invisible, entrez alors le SSID du rseau dans la bote de dialogue, slectionnez le type dencryptage partir du menu droulant, et cliquez sur le bouton Add (ajouter). Ceci ajoute manuellement le rseau en tte de la liste. Cliquez sur le nouveau rseau de la liste et entrez le mot de passe si ncessaire. Cliquez sur Connect (connecter) pour joindre le rseau. 3 Vrifiez si votre thermostat est connect. Lorsque la connexion est en cours, Wait (Patientez) clignote sur le thermostat pour une dure pouvant aller jusqu 3 minutes. Une fois la connexion tablie, laffichage indique Wi-Fi Setup Connection Success
(Connexion Wi-Fi tablie). La puissance du signal Wi-Fi saffiche dans le coin suprieur droit. Aprs environ 60 secondes, lcran daccueil saffiche et Register at Total Connect (Enregistrez-vous sur Total Connect) clignote jusqu ce que lenregistrement soit termin. Si ces messages napparaissent pas, voir page 10. Pour lenregistrement en ligne de laccs distance votre thermostat, poursuivez la page 12. M33875 M33876 Remarque : Si le thermostat affiche Connection Failure (chec de la connexion) ou continue dafficher Wi-Fi Setup (Configuration Wi-Fi), confirmez que vous avez correctement entr le mot de passe de votre rseau domestique ltape 2. Sil est correct, consultez la Foire aux questions honeywellhome.com/support 11 69-2715EF07 Enregistrement de votre thermostat en ligne Pour visualiser et rgler votre thermostat distance, vous devez possder un compte Total Connect Comfort. Voici comment procder. 1 Ouvrez le site web Total Connect Comfort. Allez sur le site mytotalconnectcomfort.com Visionnez la vido denregistrement du thermostat honeywellhome.com/wifi-thermostat 2 Ouvrez une session ou crez un compte. Si vous possdez un compte, cliquez sur Login (Ouvrir une session) ou cliquez sur Create An Account
(crer un compte). 2a Suivez les instructions lcran. 2b Consultez votre messagerie et recherchez le message dactivation provenant de My Total Connect Comfort. Ceci peut prendre plusieurs minutes. Remarque : Si vous ne recevez aucune rponse, consultez votre bote de pourriels ou utilisez une autre adresse lectronique. 2c Suivez les instructions dactivation figurant dans le message. 2d Ouvrez une session. 3 Enregistrez votre thermostat. Lorsque vous avez accs votre compte Total Connect Comfort, enregistrez votre thermostat. 3a Suivez les instructions lcran. Aprs avoir ajout lemplacement de votre thermostat, vous devez entrer les identifiants uniques de votre thermostat :
MAC ID MAC CRC Remarque : Ces identifiants figurent sur la carte didentification du thermostat fournie dans la bote du thermostat. Ces identifiants ne sont pas sensibles la casse. 69-2715EF07 12 0 7 5 1 3 M 1 7 5 1 3 M Thermostat ID Card Use the MAC ID and CRC ID to register this product at mytotalconnectcomfort.com Carte didentification de thermostat Utilisez lidentification MAC et lidentification CRC pour enregistrer ce produit mytotalconnectcomfort.com Tarjeta de identificacin del termostato Utilice la identificacin MAC y la identificacin CRC para inscribir este producto en mytotalconnectcomfort.com Resideo Inc., 1985 Douglas Drive North, Golden Valley, MN 55422 www.resideo.com 2018 Resideo Technologies, Inc. All rights reserved. The Honeywell Home logo is used under license from Honeywell International Inc. 69-2723EFS03 M.S. Rev. 12-18 Printed in U.S.A. 69-2723EFS-03 MAC ID MAC CRC Enregistrement de votre thermostat en ligne 3b Lorsque le thermostat est convenablement enregistr, lcran denregistrement Total Connect Comfort affiche le message SUCCESS (russi). Sur laffichage du thermostat, Setup Complete (Configuration termine) saffiche pour environ 90 secondes. 3c Veuillez aussi noter que le thermostat affiche maintenant la puissance du signal. Flicitations! Vous avez termin. Vous pouvez maintenant contrlervotre thermostat de nimportequel endroit au moyen de votre ordinateur portatif, de votre tablette ou de votre tlphone intelligent. 72 Des applications gratuites sont disponibles pour les appareils iPhone, iPad et iPod touch dApple sur iTunes ou sur Google Play pour tous les appareils Android. Recherchez des rabais dans votre rgion Votre thermostat pourrait maintenant tre admissible des remises dans votre rgion. Recherchez les offres dans votre rgion sur HoneywellHome.com/Rebates 13 69-2715EF07 Rglage de lheure et du jour 1 Appuyez sur Set Clock/Day/Schedule (Rgler lhorloge/le jour/le programme), puis sur s ou sur t pour rgler lhorloge. 2 Appuyez sur Set Day (Rgler le jour) ou sur s ou sur t pour choisir le jour de la semaine. 3 Appuyez sur Done (Termin) pour sauvegarder. Remarque : Si loption Set Clock/Day/Schedule
(Rgler lhorloge/le jour/le programme) nest pas affiche, appuyez sur Done (Termin). Remarque : Si Set Clock (Rgler lhorloge) clignote lcran, le thermostat respecte vos rglages pour la priode de rveil (WAKE) du lundi jusqu ce que vous changiez le rglage de lheure et du jour. Rglage du ventilateur Appuyez Fan pour slectionner On (en fonction) ou Auto
(basculez pour reslectionner). Auto : le ventilateur fonctionne uniquement lorsque le systme de chauffage ou de refroidissement est en fonction. Auto est le rglage le plus couramment utilis. On : le ventilateur est toujours en fonction. Remarque : Les options peuvent varier en fonction de lquipement de chauffage/refroidissement. HOLD HOLD MCR33855 MCR33895 Slection du mode de fonctionnement du systme Appuyez sur System (systme) pour slectionner une option. Heat (chauffage) : commande uniquement le systme de chauffage. Cool (refroidissement) : commande uniquement le systme de refroidissement. Off (arrt) : les systmes de chauffage et de refroidissement sont arrts. Auto : slectionne le chauffage ou le refroidissement en fonction de la temprature intrieure. Em Heat (thermopompes avec chauffage auxiliaire) : commande le chauffage auxiliaire/
durgence. Le compresseur est arrt. 69-2715EF07 14 MCR33880 Remarque : Selon la faon dont votre thermostat a t install, vous pourriez ne pas voir tous les rglages du systme. Rglage des programmes 1 Appuyez sur Set Clock/Day/Schedule (Rgler lhorloge/
le jour/le programme), puis sur Set Schedule (Rgler le programme). 2 Appuyez sur s ou sur t pour rgler lheure du rveil de lundi, puis appuyez sur Next (Suivant). 3 Appuyez sur s ou sur t pour rgler la temprature pour cette priode, puis appuyez sur Next (Suivant). 4 Rglez lheure et la temprature pour la priode suivante (Leave/Dpart). Rptez les tapes 2 et 3 pour chaque priode. 5 Appuyez sur Next (Suivant) pour rgler les priodes du jour suivant. Rptez les tapes 2 4 pour chaque jour. 6 Appuyez sur Done (Termin) pour sauvegarder et quitter. Remarque : Assurez-vous que le thermostat est rgl au mode de systme que vous souhaitez programmer
[Heat (Chauffage) ou Cool (Refroidissement)]. Drogation temporaire de la programmation Drogation permanente de la programmation Appuyez sur s ou t pour ajuster immdiatement la temprature. La nouvelle temprature sera uniquement maintenue jusquau dbut de la prochaine priode programme. Pour annuler ce rglage temporaire tout moment, appuyez sur Cancel (annuler). Lhoraire de programmation est nouveau en vigueur. 1 Appuyez sur HOLD (maintien) pour rgler la temprature de faon permanente. Ceci dsactive lhoraire de programmation. 2 Appuyez sur s ou sur t pour rgler la temprature. Le rglage de la temprature sera maintenu 24 heures par jour jusqu ce que vous le changiez manuellement ou que vous appuyiez sur Cancel (Annuler) pour revenir au programme. MCR33892 HOLD MCR33896 HOLD MCR33897 15 69-2715EF07 Annulation de lenregistrement du thermostat Si vous supprimez le thermostat de votre compte Total Connect Comfort (par exemple, si vous dmnagez et laissez le thermostat en place), le thermostat affichera le message Register at Total Connect
(Enregistrez-vous sur Total Connect) jusqu ce quil soit enregistr de nouveau. Dconnexion Wi-Fi Remplacement du routeur Si vous dconnectez le thermostat de votre rseau Wi-Fi :
1 Entrez dans la configuration du systme (voir page 18). 2 Rglez la fonction 39 0 (voir page 19). Lcran affichera le message Wi-Fi Setup (Configuration Wi-Fi). Reconnectez-vous un rseau Wi-Fi en suivant les tapes de la page 10. Dsactivation de la Wi-Fi Si vous ne prvoyez pas contrler le thermostat distance, vous pouvez supprimer le message Wi-Fi Setup (Configuration Wi-Fi) de lcran :
1 Accdez la configuration du systme (voir page 18). 2 Changez le paramtre 38 0 (voir page 19). La mention Wi-Fi Setup sera supprime de lcran. Si vous voulez connecter le rseau Wi-Fi plus tard, remettez le paramtre 38 1. Mises jour du logiciel Honeywell introduit rgulirement des mises jour du logiciel pour ce thermostat. Les mises jour seffectuent automatiquement par votre connexion Wi-Fi. Tous vos rglages sont sauvegards; vous navez donc pas besoin de procder des changements aprs la mise jour. Pendant la mise jour, le message Updating (Mise jour en cours) clignote sur votre thermostat qui affiche galement le pourcentage de mise jour effectu. Lorsque la mise jour est termine, votre cran daccueil reprend son apparence habituelle. Remarque : Si le thermostat nest pas connect la Wi-Fi, vous nobtiendrez pas les mises jour automatiques. 69-2715EF07 16 M33876 M33855 M34001 Pourcentage de mise jour termin Technologie Smart Response Celle-ci permet au thermostat dapprendre combien de temps il faut votre systme de chauffage/refroidissement pour atteindre le rglage de temprature programm, afin que la temprature voulue soit obtenue lheure programme. Par exemple : rglez lheure de rveil 6 heures et la temprature 70. Le chauffage est mis en fonction avant 6 heures de manire ce que la temprature soit de 70 6 heures. Remarque : la fonction de configuration systme 13 contrle la technologie Smart Response. Voir Technologie Smart Response la page 19. Protection du compresseur Cette fonction force le compresseur attendre quelques minutes avant un redmarrage, pour viter dendommager lquipement. M33881 Le message Recovery (reprise) saffiche lorsque le systme est activ avant une priode de temps programme. M33882 Le message Cool On (Refroidissement en marche) (ou Heat On [Chauffage en marche] pour une pompe chaleur) clignote en attendant. Commutation automatique Celle-ci est utilise dans les climats o le conditionnement dair et le chauffage sont utiliss le mme jour. Lorsque le systme est rgl sur Auto, le thermostat slectionne automatiquement le chauffage ou le refroidissement en fonction de la temprature intrieure. Lcart entre les rglages de chauffage et de refroidissement doit tre dau moins 3 degrs. Le thermostat ajuste automatiquement les rglages afin de maintenir ces 3 degrs dcart. MCR33893 Remarque : la fonction de configuration systme 12 contrle la commutation automatique. Voir Commutation manuelle/
automatique la page 19. 17 69-2715EF07 Fonctions et options de configuration Vous pouvez modifier des options pour plusieurs fonctions du systme. Les fonctions disponibles dpendent de votre type de systme. Les fonctions ainsi que les options disponibles sont dcrites aux pages 1819. Ce thermostat est prrgl pour un systme de chauffage/refroidissement tage unique. La fonction de configuration 1 pour une thermopompe ajustera les rglages par dfaut. 1 Appuyez simultanment sur Fan (Ventilateur) et sur s pendant 3 secondes environ. Lcran change pour afficher deux nombres et les appellations des boutons sont les suivantes : Done (Termin), Back (Retour), sans appellation, Next (Suivant). 2 Appuyez sur Next (Suivant) jusqu ce que vous aperceviez le numro de la fonction le nombre plus lev gauche du rglage voulu. 3 Pour modifier les options dune fonction, appuyez sur s ou sur t jusqu ce que loption voulue (le nombre plus petit droite) saffiche. 4 Rptez les tapes 2 et 3 jusqu ce que vous ayez rgl toutes les fonctions que 5 Lorsque toutes les modifications ont t effectues, appuyez sur Done (Termin) vous souhaitez modifier. pour sauvegarder et quitter. HOLD MCR33883 HOLD MCR33884 Configuration du systme Fonction Rglages et Options 1 2 3 5 6 Slection du type de systme Si vous ntes pas certain de votre type de systme de chauffage/
refroidissement ou que vous avez dautres questions, consultez le site honeywellhome.com 0 Chauffage/refroidissement : chauffage au gaz, au mazout ou lectrique avec climatisation centrale. 1 Thermopompe : thermopompe sans chauffage de secours ou auxiliaire. 2 Chauffage uniquement : chauffage au gaz, au mazout ou leau chaude sans climatisation centrale. 3 Chauffage uniquement avec ventilateur : chauffage au gaz, au mazout ou lectrique sans climatisation centrale. 4 Refroidissement uniquement : climatisation centrale uniquement. 5 Thermopompe : thermopompe avec chauffage de secours ou auxiliaire. 6 Chauffage/refroidissement multi-tages : 2 tages de chauffage (fils sur W et W2), 2 tages de refroidissement (fils sur Y et Y2). 7 Chauffage/refroidissement multi-tages : 2 tages de chauffage (fils sur W et W2), 1 tage de refroidissement (fils sur Y). 8 Chauffage/refroidissement multi-tages : 1 tage de chauffage (fils sur W), 2 tages de refroidissement (fils sur Y et Y2). Vanne de commutation de thermopompe
(pour thermopompes uniquement) 0 Vanne de commutation de refroidissement : utilisez ce rglage si vous avez connect un fil tiquet O la borne O/B. 1 Vanne de commutation de chauffage : utilisez ce rglage si vous avez connect un fil tiquet B la borne O/B. Commande du ventilateur de chauffage 0 Chauffage au gaz ou au mazout : utilisez ce rglage en cas de systme de chauffage au gaz ou au mazout (le systme contrle le fonctionnement du ventilateur). 1 Chauffage lectrique : utilisez ce rglage en cas de systme de chauffage lectrique (le thermostat contrle le fonctionnement du ventilateur). Cycle de chauffage 5 Appareil de chauffage au gaz ou au mazout : appareil de chauffage au gaz/
Cycle de chauffage, tape 2 mazout standard (rendement infrieur 90 %). 9 Appareil de chauffage lectrique : systmes de chauffage lectriques. 3 Appareil de chauffage eau chaude ou haut rendement : systme eau chaude ou appareil de chauffage au gaz (rendement suprieur 90 %). 1 Systme vapeur ou gravit au gaz/mazout : systmes de chauffage 69-2715EF07 vapeur ou gravit. 18 Configuration du systme Fonction Rglages et Options 0 Commutation manuelle (Chauffage/Refroidissement/Arrt). 1 Commutation automatique (Chauffage/Refroidissement/Auto/
Arrt). Active automatiquement le chauffage ou le refroidissement en fonction de la temprature de la pice. Remarque : le systme maintient une diffrence minimale de 3 F entre les rglages de chaleur et de refroidissement. 1 En marche 0 Arrt 0 Fahrenheit 1 Celsius 12 Commutation manuelle/automa-
tique Voir la page 17 pour de plus amples informations. Technologie Smart Response Voir la page 17 pour de plus amples informations. 13 14 Unit de temprature
(F/C) 16 Options de programmation 36 Device Name
(Nom de lappareil) Ce nom identifiera le thermostat lorsque vous le consultez distance. Si vous enregistrez plusieurs thermostats, attribuez un nom diffrent chacun dentre eux. 1 Horaire de programmation activ (programmable sur 7 jours). 0 Horaire de programmation dsactiv. Le thermostat ne peut pas tre programm. 44 Porch 32 Lower Level 46 Sewing Room 33 Master Bath 47 Spa 52 = Thermostat 16 Exercise Room 30 Library 1 Basement 17 Family Room 31 Living Room 45 Rec Room 2 Bathroom 18 Fireplace 3 Bathroom 1 19 Foyer 4 Bathroom 2 20 Game Room 34 Master Bed 5 Bathroom 3 21 Garage 6 Bedroom 22 Great Room 7 Bedroom 1 23 Guest Room 37 Nursery 8 Bedroom 2 24 Gym 9 Bedroom 3 25 Kid's Room 10 Bedroom 4 26 Kitchen 11 Boat House 12 Bonus Room 27 Kitchen 1 13 Computer Room 28 Kitchen 2 14 Den 15 Dining Room 38 Office 39 Office 1 40 Office 2 41 Pantry 42 Play Room 56 Wine Cellar 35 Media Room 49 Studio 36 Music Room 50 Sun Room 29 Laundry Room 43 Pool Room 57 Workshop 51 Theater 52 Thermostat 53 Upper Level 54 Utility Room 55 Walk In Closet 48 Storage Room 38 Wi-Fi En marche/Arrt 1 Le Wi-Fi est en marche et le thermostat peut tre connect un rseau Wi-Fi 0 Le Wi-Fi est en marche. Le thermostat ne peut pas tre connect un rseau Wi-Fi. Si vous ne connectez pas le thermostat un rseau Wi-Fi, le texte Wi-Fi Setup (configuration Wi-Fi) sera supprim de la fentre de messages. 39 Connexion Wi-Fi 1 Connect au rseau Wi-Fi. Il sagit de la configuration automatique lorsque le thermostat est connect au rseau Wi-Fi. 0 Slectionnez 0 pour le dconnecter du rseau Wi-Fi. 0 La priode et le jour ne sont pas affichs lcran daccueil. 1 La priode et le jour sont affichs lcran daccueil. 42 Affichage de la priode et du jour de la semaine 85 Restaurer la programmation par dfaut 90 Restauration des rglages originaux 0 Continuer utiliser lhoraire programm. 1 Restaurer le programme du thermostat aux rglages dconomie dnergie 0 Non 1 Dconnecte le thermostat du rseau Wi-Fi et restaure les rglages dorigine (efface les personnalisations). 19 69-2715EF07 Questions frquemment poses Q:Q Mon thermostat fonctionnera-t-il toujours si je perds ma connexion Wi-Fi?
Q:R Oui, le thermostat actionnera votre systme de chauffage et/ou de refroidissement avec ou sans Wi-Fi. Q:Q Comment puis-je trouver le mot de passe de mon routeur?
Q:R Contactez le fabricant du routeur. Q:Q Pourquoi ne vois-je pas ma page de configuration Wi-Fi?
Q:R Vous tes probablement uniquement connect votre routeur, et non pas votre thermostat. Essayez de vous reconnecter au thermostat. Q:Q Pourquoi mon thermostat ne se connecte-t-il pas mon routeur Wi-Fi mme si celui-ci est trs proche du thermostat?
Q:R Vrifiez si le mot de passe saisi pour le routeur Wi-Fi est correct. Q:Q O puis-je trouver mes codes MAC ID et MAC CRC?
Q:R Les numros MAC ID et MAC CRC figurent sur la carte qui accompagne le thermostat ou au dos du thermostat (visible lorsque le thermostat est retir de la plaque murale). Chaque thermostat possde un MAC ID et un MAC CRC uniques. Q:Q Il est impossible denregistrer mon thermostat sur le site Total Connect Comfort. Q:R Vrifiez si le thermostat est correctement inscrit dans le rseau Wi-Fi domestique. La fentre de messages affichera Wi-Fi Setup ou Register at Total Connect. Vous devriez galement voir licne de force de signal Wi-Fi. Vrifiez si le routeur Wi-Fi dispose dune bonne connexion internet. Sur votre ordinateur, vrifiez si vous pouvez ouvrir la page mytotalconnectcomfort. com Si vous ne pouvez pas louvrir, coupez votre modem internet pendant quelques secondes, puis rallumez-le. Q:Q Je suis enregistr sur le site Total Connect Comfort mais je nai pas pu ouvrir de session en utilisant mon nouveau compte. Q:R Consultez votre messagerie et vrifiez si vous avez reu le message dactivation. Suivez les instructions dactivation de votre compte, puis ouvrez une session sur le site web. Q:Q Je me suis enregistr sur le site Total Connect Comfort et nai pas reu de message de confirmation. Q:R Vrifiez si le message ne se trouve pas dans le dossier des spams ou des messages effacs. Q:Q Y a-t-il un moyen daccrotre la force du signal?
Q:R La plupart des routeurs peuvent tre configurs comme rpteur. Vous pouvez galement acheter et installer un rpteur Wi-Fi. Pour plus de questions frquemment poses, consultez le site honeywellhome.com/support 69-2715EF07 20 Dpannage Perte du signal Si lindicateur no-Wi-Fi (pas de Wi-Fi) saffiche la place de lindicateur de puissance du signal Wi-Fi dans le coin suprieur droit de lcran daccueil :
Assurez-vous que la Wi-Fi fonctionne chez vous en la vrifiant sur un autre appareil; si elle ne fonctionne pas, adressez-vous votre fournisseur de services Internet. Dplacez le routeur. Redmarrez le thermostat : retirez-le de la plaque M33997 M33997 M33999 M33998 murale, patientez pendant 10 secondes et raccrochez-
le sur la plaque murale. Revenez ltape 1 de la section Connexion votre rseau Wi-Fi. Codes derreur Dans le cas de certains problmes, lcran du thermostat affiche un code qui dsigne la nature du problme. Tout dabord, les codes derreur sont affichs seuls dans la zone de lheure de lcran; aprs quelques minutes, lcran daccueil saffiche et le code et lheure saffichent alternativement. Code derreur Action E01 Lalimentation du routeur a t coupe pendant la configura-
tion de la Wi-Fi. Assurez-vous que le routeur est aliment. Si vous essayez dtablir la connexion un rseau masqu ou ajout manuellement, assurez-vous que le routeur est aliment et fonctionne. E02 Mot de passe Wi-Fi non valide. Ce code saffiche pendant 30 secondes, puis le thermostat se remet en mode Wi-Fi Setup
(Configuration de la Wi-Fi). Saisissez de nouveau le mot de passe du rseau Wi-Fi de votre maison. Rptez le processus de configuration et confirmez le mot de passe du rseau Wi-Fi de votre maison. Code derreur Action E42 Le routeur ne fournit pas dadresse IP au thermostat. Patientez pendant 30 minutes, la connexion peut prendre plusieurs minutes. Sil ny a toujours pas de connexion, retirez le thermostat de la plaque murale pendant 10 secondes, puis raccrochez-le (voir page 10). Assurez-vous que votre routeur est correctement configur pour fournir automatiquement les adresses IP. Assurez-vous que le cble Internet est branch. Redmarrez le routeur. Pas de connexion In-
ternet. Le thermostat ne peut pas com-
muniquer avec Total Connect Comfort. E43 E99 Erreur dordre gnral Retirez le thermostat de la plaque murale pendant 10 secondes, puis raccrochez-le
(voir page 10). 21 69-2715EF07 Dpannage En cas de difficults avec le thermostat, essayer les suggestions suivantes. La plupart des problmes peuvent tre rgls rapidement et facilement. Rien napparat lcran Impossible de changer le rglage du systme Refroidissement Le ventilateur ne tourne pas lorsque de la chaleur est requise Les mentions Cool On
(Refroidissement en marche) ou Heat On
(Chauffage en marche) clignotent lcran. La thermopompe met de lair frais en mode chauffage, ou de lair chaud en mode refroidissement Le systme de chauffage ou de refroidissement ne rpond pas Le systme de chauffage fonctionne en mode refroidissement Vrifiez le disjoncteur et rinitialisez-le si ncessaire. Assurez-vous que linterrupteur de marche-arrt du systme de chauffage et de refroidissement est sur marche. Assurez-vous que la porte de lappareil de chauffage est bien ferme. Vrifiez si le fil C est connect (voir page 6). Vrifiez la fonction 1 : Type de systme pour vous assurer quelle soit configure en fonction de votre quipement de chauffage et de refroidissement (voir page 18). Vrifiez la fonction 3 : Commande du ventilateur de chauffage pour vous assurer quelle soit configure en fonction de votre quipement de chauffage (voir page 18). La fonction de protection du compresseur est active. Attendez 5 minutes que le systme se remette en marche en toute scurit sans endommager le compresseur. Vrifiez la fonction 2 : Vanne de commutation de thermopompe pour vous assurer quelle soit configure en fonction de votre quipement de chauffage (voir page 18). Appuyez sur System (systme) pour rgler le systme sur Heat
(chauffage). Vrifiez si le rglage de temprature est suprieur la temprature intrieure. Appuyez sur System pour rgler le systme sur Cool
(refroidissement). Vrifiez si le rglage de temprature est infrieur la temprature intrieure. Vrifiez le disjoncteur et rinitialisez-le si ncessaire. Assurez-vous que linterrupteur de marche-arrt du systme de chauffage et de refroidissement est sur marche. Assurez-vous que la porte de lappareil de chauffage est bien ferme. Attendez 5 minutes que le systme rponde. Vrifiez la fonction 1 : Type de systme pour vous assurer quelle soit configure en fonction de votre quipement de chauffage et de refroidissement (voir page 18). Lquipement de chauffage et lquipement de refroidissement fonctionnent en mme temps Vrifiez la fonction 1 : Type de systme pour vous assurer quelle soit configure en fonction de votre quipement de chauffage et de refroidissement (voir page 18). Saisissez et retirez le thermostat de la plaque murale. Assurez-
vous quaucun fils dnuds ne se contactent. Vrifiez si le cblage du thermostat est adquat. 69-2715EF07 22 Glossaire Fil C Le fil C , ou neutre, amne lalimentation 24 V ca au thermostat partir du systme de chauffage/
refroidissement. Certains anciens thermostats mcaniques ou pile peuvent ne pas tre dots de ce fil. Il est ncessaire ltablissement dune connexion Wi-Fi votre rseau domestique. Systme de chauffage/refroidissement thermopompe Des thermopompes sont utilises pour chauffer et refroidir un immeuble. Si votre ancien thermostat comporte un rglage pour chauffage auxiliaire ou durgence, vous avez probablement une thermopompe. Systme de chauffage/refroidissement conventionnel Systmes sans thermopompe ; ceux-ci incluent des appareils de traitement dair, des appareils de chauffage ou des chaudires qui fonctionnent au gaz naturel, au mazout ou llectricit. Ils peuvent ou non inclure un appareil de conditionnement dair. Cavalier Un petit morceau de fil reliant deux bornes ensemble. MAC ID, MAC CRC Codes alphanumriques identifiant de manire unique votre thermostat. QR Code Code de rponse rapide. Une image bidimensionnelle lisible par une machine. Votre appareil sans fil peut lire le motif noir et blanc insr dans le carr et connecter directement son navigateur un site web. QR Code est une marque dpose de DENSO WAVE INCORPORATED. Informations rglementaires Dclaration de conformit la FCC (partie 15.19)
(tats-Unis uniquement) Cet appareil est conforme la partie 15 du rglement de la FCC. Son fonctionnement est soumis aux deux conditions suivantes :
1 Ce dispositif ne doit pas causer dinterfrences nuisibles, et 2 Ce dispositif doit accepter toutes les interfrences reues, y compris celles pouvant causer un fonctionnement non souhait. Avertissement de la FCC (partie 15.21) (tats-Unis uniquement) Toute modification qui nest pas autorise expressment par la partie responsable de la conformit de lappareil peut rendre lutilisateur inapte faire fonctionner lquipement. Rorienter ou dplacer lantenne rceptrice. Augmenter la sparation entre lquipement et le rcepteur. Brancher lquipement dans la prise dun circuit diffrent de celui auquel le rcepteur est connect. Consulter le distributeur ou un technicien radio/TV comptent pour obtenir de laide. Thermostats Pour tre conformes aux limites dexposition aux radiofrquences tablies par FCC et Industrie Canada pour le grand public/lexposition non contrle, la ou les antennes utilises pour ces transmetteurs doivent tre installes au moins 20 cm de toutes les personnes et ne peuvent tre situes au mme endroit quune autre antenne ou fonctionner conjointement avec une autre antenne ou un autre transmetteur. Dclaration relative aux interfrences de la FCC
(partie 15.105 (b)) (tats-Unis uniquement) Cet quipement a t test et est conforme aux limites des dispositifs numriques de Classe B, conformment la Partie 15 du rglement de la FCC. Ces limites sont conues pour fournir une protection raisonnable contre les interfrences nuisibles dans une installation rsidentielle. Cet quipement gnre, utilise et peut mettre de lnergie de radiofrquence, et sil nest pas install et utilis conformment aux instructions, peut causer des interfrences nuisibles aux communications radio. Il ny a toutefois aucune garantie quune interfrence ne se produira pas dans une installation particulire. Si cet quipement cause des interfrences nuisibles la rception radio et tlvision, ce qui peut tre dtermin en teignant le dispositif et en le remettant en marche, il est recommand lutilisateur de tenter de corriger linterfrence par lune des mesures suivantes :
RSS-GEN Conformment aux normes dIndustrie Canada, ce transmetteur radio ne peut fonctionner quavec une antenne dont le type et le gain maximum sont approuvs par Industrie Canada. Pour rduire les risques dinterfrence s radio encourus par dautres utilisateurs, le type et le gain de lantenne doivent tre choisis de faon ce que la puissance rayonne isotrope quivalente (p.i.r.e.) ne soit pas suprieure celle ncessaire ltablissement dune bonne communication. Le fonctionnement est soumis aux deux conditions suivantes :
1 Ce dispositif ne doit pas causer dinterfrences, et 2 Ce dispositif doit accepter toutes les interfrences, y compris celles pouvant causer un fonctionnement non souhait. 23 69-2715EF07 Garantie limite dun an Resideo garantit ce produit contre tout dfaut de pice ou de main-doeuvre, durant une priode pour un (1) ans partir de la date dachat par le consommateur dorigine si le produit est utilis et entretenu convenablement. En cas de dfaillance ou de mauvais fonctionnement pendant la priode de garantie, Resideo remplacera ou rparera le produit, sa discrtion. Si le produit est dfectueux
(i) renvoyez-le avec la facture ou une autre preuve dachat date au lieu dachat; ou
(ii) appelez le service la clientle de Resideo en composant le 1-800-633-3991. Le service la clientle dterminera si le produit doit tre retourn ladresse suivante : Resideo Return Goods, 1985 Douglas Dr. N., Golden Valley, MN 55422, ou si un produit de remplacement peut vous tre expdi. La prsente garantie ne couvre pas les frais de retrait ou de rinstallation. La prsente garantie ne sapplique pas sil est dmontr par Resideo que la dfaillance ou le mauvais fonctionnement sont dus un endommagement du produit alors que le consommateur lavait en sa possession. La responsabilit exclusive de Resideo se limite rparer ou remplacer le produit conformment aux modalits susmentionnes. RESIDEO NEST EN AUCUN CAS RESPONSABLE DES PERTES OU DOMMAGES, Y COMPRIS LES DOMMAGES INDIRECTS OU ACCESSOIRES DCOULANT DIRECTEMENT OU INDIRECTEMENT DUNE VIOLATION QUELCONQUE DUNE GARANTIE, EXPRESSE OU TACITE, APPLICABLE AU PRSENT PRODUIT, OU TOUTE AUTRE DFAILLANCE DU PRSENT PRODUIT. Certaines provinces ne permettent pas lexclusion ou la restriction des dommages indirects ou accessoires et, par consquent, la prsente restriction peut ne pas sappliquer. CETTE GARANTIE EST LA SEULE GARANTIE EXPRESSE FAITE PAR RESIDEO POUR CE PRODUIT. LA DURE DE TOUTE GARANTIE IMPLICITE, INCLUANT LES GARANTIES DE QUALIT MARCHANDE OU DADAPTATION UNE UTILISATION PARTICULIRE, EST LIMITE PAR LES PRSENTES LA PRIODE UN ANNE DE LA PRSENTE GARANTIE. Certaines provinces ne permettent pas de limiter la dure des garanties tacites et, par consquent, la prsente limitation peut ne pas sappliquer. La prsente garantie donne au consommateur des droits spcifiques et certains autres droits qui peuvent varier dune province lautre. Pour toute question concernant la prsente garantie, prire dcrire aux Services la clientle de Resideo ladresse suivante :
Resideo Customer Relations, 1985 Douglas Dr, Golden Valley, MN 55422 ou composer le 1-800-633-3991. 69-2715EF07 24 Caractristiques lectriques nominales Tension (50/60Hz) Courant de fonctionnement Borne 20-30 V CA W Chauffage
(Pile) 750 mVCC W2 (Aux/E) Chauffage 20-30 Vac 20-30 V CA Y Refroidissement 20-30 V CA Y2 Refroidissement 20-30 V CA G Soufflante 20-30 V CA O/B Substitution 20-30 V CA L Sortie 0,02-1,0 A 100 mA CC 0,02-1.0 A 0,02-1,0 A 0,02-1,0 A 0,02-0,5 A 0,02-0,5 A 0,02-0,5 A 25 69-2715EF07 33-00130EF-05www.resideo.comResideo Technologies Inc. 1985 Douglas Drive North, Golden Valley, MN 5542233-00130EF05 M.S. Rev. 06-20 | Imprim aux tats-Unis 2020 Resideo Technologies, Inc. All rights reserved.The Honeywell Home trademark is used under license from Honeywell International, Inc. This product is manufactured by Resideo Technologies, Inc. and its affiliates.Tous droits rservs. La marque de commerce Honeywell Home est utilise avec lautorisation dHoneywell International, Inc. Ce produit est fabriqu par Resideo Technologies, Inc. et ses socits affilies.Apple, iPhone, iPad, iPod touch et iTunes sont des marques de commerce de Apple Inc. Toutes les autres marques de commerce sont proprit de leurs propritaires respectifs.
1 | Label | ID Label/Location Info | 307.02 KiB | December 29 2021 / December 30 2021 |
TH6320WF03 Label Figure 1. Back side of thermostat FCC/ISED Label location. 10/6/2021 Resideo Confidential TH6320WF03 Label Figure 2. Label location. 10/6/2021 Resideo Confidential TH6320WF03 Label Figure 3. Close Up of label. 10/6/2021 Resideo Confidential
1 | Cover Letter Detailing Reason for Filing | Cover Letter(s) | 104.49 KiB | December 29 2021 / December 30 2021 |
Date: 12/10/2021 Attn: FCC Office of Engineering and Technology / Elite Electronic Engineering Ref:
Applicant:
Certification for FCC ID: HS9-TH6320WF03 Ademco Inc. This is to request for a Product Certification under FCC ID: HS9-TH6320WF03. This product which will bear the above-mentioned FCC ID contains 4 variants:
To Whom It May Concern TH6320WF1005 RTH6580WF1001 RTH6580WF1003 RET97E5D1005 All variants share the same RF block where the RF circuit and antenna are electrically and mechanically identical. The only differences between the variants are SW, packaging. If you have any questions regarding this application, please feel free to contact me. Sincerely yours, Christian Fouth Global Leader Wireless Testing Ademco inc./Resideo Technologies
1 | Focus Pro Device Variants | Cover Letter(s) | 131.13 KiB | December 29 2021 / December 30 2021 |
TH6320WF03 Resideo is seeking a Re-Certification under FCC 15.247 for a family of WiFi enabled thermostats under FCC:HS9-TH6320WF03 that operate in the 2.4GHz ISM band utilizing the popular 802.11b/g/n standard data-rates and modulations. These thermostats are designed to control various HVAC equipment. While these thermostats are intended to be used in mostly residential applications, they can also be used in various light-commercial application as well. Variants under this filing include the following devices. All variants share the same RF block where the RF circuit and antenna and are electrically and mechanically identical. Differences include: SW, packaging. Model Numbers:
Focus Pro Connected Thermostat Family
(RTH6500WF) TH6320WF1005, RTH6580WF1001, RTH6580WF1003, RTH6580WF1006, RET97E5D1005 12/7/2021 Resideo Confidential
1 | TH6320WF03- FCC Request for confidentiality | Cover Letter(s) | 84.76 KiB | December 29 2021 / December 30 2021 |
Date: 11/18/2021 Attention: FCC Office of Engineering and Technology / Elite Electronic Engineering, Inc. Subject: Request for Confidentiality FCC ID: HS9-TH6320WF03 To Whom it May Concern:
Pursuant to the provisions of Sections 0.457 and 0.459 of the Commission's rule (47 CFR 0.457, 0.459), we are requesting the Bureau to withhold the following attachments as confidential document from public disclosure indefinitely. Schematic Diagram Block Diagram Operational Description Above mentioned document contains detailed system and equipment description considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. Best Regards, Christian Fouth Global Leader, Wireless Testing Ademco Inc./Resideo Technologies
1 | Test setup photos etr2101580-01 | Test Setup Photos | 2.36 MiB | December 29 2021 / December 30 2021 |
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2021-12-30 | 2412 ~ 2462 | DTS - Digital Transmission System | Original Equipment |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 | Effective |
2021-12-30
|
||||
1 | Applicant's complete, legal business name |
Ademco Inc
|
||||
1 | FCC Registration Number (FRN) |
0004788345
|
||||
1 | Physical Address |
1985 Douglas Drive
|
||||
1 |
Golden Valley, MN
|
|||||
1 |
United States
|
|||||
app s | TCB Information | |||||
1 | TCB Application Email Address |
r******@elitetest.com
|
||||
1 | TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
||||
app s | FCC ID | |||||
1 | Grantee Code |
HS9
|
||||
1 | Equipment Product Code |
TH6320WF03
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 | Name |
C**** F********
|
||||
1 | Title |
Global Leader Wireless Testing
|
||||
1 | Telephone Number |
540-6********
|
||||
1 | Fax Number |
763-9********
|
||||
1 |
c******@resideo.com
|
|||||
app s | Technical Contact | |||||
1 | Firm Name |
Ademco Inc.
|
||||
1 | Name |
J******** V******
|
||||
1 | Physical Address |
Av. Victor Hugo No. 11517 Col. Complejo Industrial
|
||||
1 |
Chilhuahua
|
|||||
1 |
Mexico
|
|||||
1 | Telephone Number |
52614********
|
||||
1 |
j******@resideo.com
|
|||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 | Equipment Class | DTS - Digital Transmission System | ||||
1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | TH6320WF03 | ||||
1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 | Modular Equipment Type | Does not apply | ||||
1 | Purpose / Application is for | Original Equipment | ||||
1 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 | Grant Comments | Power Output is Conducted. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. | ||||
1 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 | Firm Name |
Elite Electronic Engineering Inc.
|
||||
1 | Name |
K**** H******
|
||||
1 | Telephone Number |
630-4******** Extension:
|
||||
1 | Fax Number |
630-4********
|
||||
1 |
k******@elitetest.com
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15C | 2412.00000000 | 2462.00000000 | 0.1766000 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC