FCC ID: M82XDS32-860 All in One Interactive Display

Interactive Flat Panel

All-in-One Touch Device PRODUCT INSTRUCTION MANUAL Thanks for buying our products Please read this manual carefully and use it correctly and keep it properly. 01 (Accessories Inspection Before Installation)

(Please confirm receipt of the following accessories before unpacking) 1. Warranty Card 2. Instruction Manual 3. Quality Certificate 02 Using environment and precautions

Notice 1 Do not place the device in a location exposed to rain and sun to prevent water leakage and damage to the device. Sun exposure can easily make the all-in-one touch device easy to age. 2 Do not place the equipment in a place with a lot of oily smoke and dirt to prevent the equipment parts from aging and oxidizing 3 The device must be hung on a sturdy wall or placed on a stable floor to prevent it from being dropped or tipped over. 4 In thunderstorm weather, please turn off the power of the device and unplug the socket to avoid high voltage damage to the all-in-one machine. 5 The input power range of the device is AC110V-240V, please use the power accurately. 6 Equipment using environment must be easy to ventilate,and the ambient temperature can not be higher than 60 degrees and lower than minus 20 degrees. This is a Class A product, it may cause radio interference in a living environment. In such cases, the user may be required to take practicable measures for its Statement interference. 03 Device Installation Please turn down the screws that fasten the wall mount on both sides with screwdriver knobs as shown in the picture

(Note: some sizes of wall mounts will be included as random accessories) Fix the wall mount with expansion screws as shown in the picture

Wall Mounted Bracket Installation. Mobile bracket installation: You can refer to the mobile bracket installation video tutorial for detailed installation process 04 Power on and off the device Using caution 1 Android system boot: After the whole machine is connected to the 220V power cord, the whole machine can be turned on through the power button on the remote control or the Q button on the front of the device. 2 Power on the OPS computer (optional): If an OPS computer is configured, press the O button of the OPS host interface on the side of the whole machine to start the OPS computer. 3 Shutdown: You can press the power button on the remote control to put the Android system and the OPS computer device into one-key standby, and the OPS computer has been started. System and hardware damage.Do not force the power off directly, otherwise it may cause damage to the Windows system and hardware of the OPS computer. 05 Interface description of the whole machine Front Button Power Indicator One-key start switch Front Interface TOUDH HDMI USB1 USB2 IR Android Mainboard Interface 06 The main operating instructions of the Android conference system Interface explanation:

The sidebar is divided into left and right sidebars. Click the icon floating on the left/right side of the screen to call up the sidebar. The expanded function buttons are back, home page, task, annotation, signal source, and notification center. The sidebar will be automatically hidden after 3S without any operation in the expanded state. 1 Back Click the icon to return or exit the current program. 2 Home Page Click the icon to enter into the system main page. 3 Task Click the icon to enter the main interface of the system.

(1) In the multitasking state, touch the task list area and swipe up and down to view the task list.

(2) Touch the task thumbnail and slide it to the left or right until it slides out of the task list area to release the thumbnail. 4 Annotation Click the icon to open the annotation. 5 Signal Source Click the icon to call out the source channel list, and the user can choose to switch the desired channel. 6 Notification Panel Click the icon to bring up the notification panel, as shown in the following figure. The notification center panel includes time display, shortcut functions of frequently used applications, and custom added applications, brightness, sound, and notification center information. 7 Remote control function

Note: In the event that the remote control is lost, the device can be operated by connecting the USB interface mouse

(The left key is to confirm, the right key is to exit or return) THS O USI This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

-- Reorient or relocate the receiving antenna.

-- Increase the separation between the equipment and receiver.

-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-- Consult the dealer or an experienced radio/TV technician for help. To maintain compliance with FCCs RF Exposure guidelines, This equipment should be installed and operated with minimum 20cm distance between the radiator and your body: Use only the supplied antenna.

Advantech Co., Ltd Agent Authorization Company: Advantech Co Ltd Ltd.Address: No.1, alley 20, Lane 26, Rueiguang Road, Neihu District, Taipei 114, Taiwan R.O.C. Product Name: All in One Interactive Display Model Number(s): XDS32-860WI50OPAS1E, XDS32-750WI50OPAS1E, XDS32-650WI50OPAS1E, XDS32-550WI50OPAS1E, XDS32-***WI50OPAS** (* represents 0-10, A-Z.) Product Description: All in One Interactive Display We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Date: 2022-06-13 Signature:

Name:

Lily Huang Title:

Certification Manager Company: Advantech Co Ltd

Advantech Co Ltd Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 2022/06/13 Subject; Request for Confidentiality FCC ID: M82XDS32-860 To Whom It May Concern, Pursuant to the provisions of the Commissions rules Title 47 Sections 0.457 and 0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Operational Description FCC Software Security Requirements for UNII devices Rev 2.1 In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR 2.803 and the importation rules in Title 47 CFR 2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s);

User Manual OR For 45 days, pursuant to Public Notice DA 04-1705. For 180 days pursuantto KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature:

Name: Lily Huang Title: Certification Manager

Advantech Co Ltd Model Difference Data2022.06.13 Product description: All in One Interactive Display Model name: XDS32-860WI50OPAS1E, XDS32-750WI50OPAS1E, XDS32-650WI50OPAS1E, XDS32-550WI50OPAS1E, XDS32-***WI50OPAS** (*

represents 0-10, A-Z.) Trade Name: N/A FCC ID: M82XDS32-860 All the model are the same circuit and RF module, except model names . Regards Sincerely Clients signature :

Clients name / title : Lily HuangCertification Manager Contact information / address: No. 1, Alley 20, Lane 26, Rueiguang Road, Neihu District, Taipei 114, Taiwan R.O.C.

Advantech Co Ltd FCC Software Configuration Control Declaration Date: June 21, 2022 Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Attn: OET Dept. Product/ Model Number: All in One Interactive Display/ XDS32-860WI50OPAS1E Regarding FCC Country Code Selection guidelines identified in KDB 594280. All applications for equipment authorization for transmitters that can have radio parameters, or other technical parameters, reported to the Commission set by software must have an attestation indicating that no third party will have software, or configuration control, to program the device out of compliance of the technical rules under which it has been certified. We declare that no third party will have software, or configuration control, to program the device out of compliance of the technical rules under which it has been certified. Name: Lily Huang Date: 2022/06/21 Title: Certification Manager Signatureof applicant FCC Software Configuration Control Declaration Rev1.1