all | frequencies |
|
|
exhibits | applications |
---|---|---|---|---|---|
manuals |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 2 |
|
Revised manual part 1 | Users Manual | 2.35 MiB | ||||
1 2 |
|
man part 2 | Users Manual | 2.43 MiB | ||||
1 2 | RF Exposure Info | |||||||
1 2 | RF Exposure Info | |||||||
1 2 | Cover Letter(s) | |||||||
1 2 | External Photos | |||||||
1 2 | Internal Photos | |||||||
1 2 | ID Label/Location Info | |||||||
1 2 | Cover Letter(s) | |||||||
1 2 | Cover Letter(s) | |||||||
1 2 | Test Report | |||||||
1 2 | Test Setup Photos | |||||||
1 2 | Test Report | |||||||
1 2 | Test Report | |||||||
1 2 | Test Setup Photos | |||||||
1 2 | Test Setup Photos |
1 2 | Revised manual part 1 | Users Manual | 2.35 MiB |
User Manual MARS-3100R/S Industrial Tablet PC Copyright The documentation and the software included with this product are copyrighted 2007 by Advantech Co., Ltd. All rights are reserved. Advantech Co., Ltd. reserves the right to make improvements in the products described in this manual at any time without notice. No part of this manual may be reproduced, copied, translated or transmitted in any form or by any means without the prior written permission of Advantech Co., Ltd. Information provided in this manual is intended to be accurate and reliable. How-
ever, Advantech Co., Ltd. assumes no responsibility for its use, nor for any infringe-
ments of the rights of third parties, which may result from its use. Acknowledgements Intel and Pentium are trademarks of Intel Corporation. Microsoft Windows and MS-DOS are registered trademarks of Microsoft Corp. All other product names or trademarks are properties of their respective owners. Product Warranty (2 years) Advantech warrants to you, the original purchaser, that each of its products will be free from defects in materials and workmanship for two years from the date of pur-
chase. This warranty does not apply to any products which have been repaired or altered by persons other than repair personnel authorized by Advantech, or which have been subject to misuse, abuse, accident or improper installation. Advantech assumes no liability under the terms of this warranty as a consequence of such events. Because of Advantechs high quality-control standards and rigorous testing, most of our customers never need to use our repair service. If an Advantech product is defec-
tive, it will be repaired or replaced at no charge during the warranty period. For out-
of-warranty repairs, you will be billed according to the cost of replacement materials, service time and freight. Please consult your dealer for more details. If you think you have a defective product, follow these steps:
1. Collect all the information about the problem encountered. (For example, CPU speed, Advantech products used, other hardware and software used, etc.) Note anything abnormal and list any onscreen messages you get when the problem occurs. 2. Call your dealer and describe the problem. Please have your manual, product, 3. and any helpful information readily available. If your product is diagnosed as defective, obtain an RMA (return merchandise authorization) number from your dealer. This allows us to process your return more quickly. 4. Carefully pack the defective product, a fully-completed Repair and Replacement Order Card and a photocopy proof of purchase date (such as your sales receipt) in a shippable container. A product returned without proof of the purchase date is not eligible for warranty service. 5. Write the RMA number visibly on the outside of the package and ship it prepaid to your dealer. Part No. 2006310000 Printed in Taiwan Edition 1 December 2007 MARS-3100R/S User Manual ii Declaration of Conformity FCC Class A Note: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Opera-
tion of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. FCC Class B Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installa-
tion. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful inter-
ference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interfer-
ence to radio or television reception, which can be determined by turning the equip-
ment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
! Reorient or relocate the receiving antenna.
! Increase the separation between the equipment and receiver.
! Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
! Consult the dealer or an experienced radio/TV technician for help. FM This equipment has passed the FM certification. According to the National Fire Pro-
tection Association, work sites are classified into different classes, divisions and groups, based on hazard considerations. This equipment is compliant with the speci-
fications of Class I, Division 2, Groups A, B, C and D indoor hazards. iii MARS-3100R/S User Manual Europe EU Declaration of Conformity This device complies with the essential requirements of the R&TTE Directive 1999/5/EC. The following test methods have been applied in order to prove presumption of conformity with the essential requirements of the R&TTE Directive 1999/5/EC:
EN 60950-1: 2001 Safety of information technology equipment IEEE Std. 1528: 2003 Recommended practice for determining the peak spatial-average specific absorption rate (SAR) in the human head from wireless communications devices: Measurement Techniques. ANSI/IEEE C95.3: 2002 IEEE recommended practice for the measurement and computations of radio frequency electromagnetic fields with respect to human exposure to such fields, 100kHz-300GHz. EN 300 328 V1.7.1 (2006-10) Electromagnetic compatibility and Radio spectrum Matters (ERM); Wideband transmission systems;
Data transmission equipment operating in the 2,4 GHz ISM band and using wide band modulation techniques; Harmonized EN covering essential requirements under article 3.2 of the R&TTE Directive EN 301 893 V1.2.3 (2003-08) Broadband Radio Access Networks (BRAN); 5 GHz high performance RLAN; Harmonized EN covering essential requirements of article 3.2 of the R&TTE Directive 2005/513/EC, Commission Decision of 11 July 2005 on the harmonised use of radio spectrum in the 5 GHz frequency band for the implementation of wireless access systems including radio local area networks (WAS/RLANs) EN 301 489-17 V1.2.1 (2002-08) and EN 301 489-1 V1.4.1 (2002-08) Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 17: Specific conditions for 2,4 GHz wideband transmission systems and 5 GHz high performance RLAN equipment This device is a 2.4 GHz wideband transmission system (transceiver), intended for use in all EU member states and EFTA countries under the following conditions and/or with the following restrictions:
In Italy the end-user should apply for a license at the national spectrum authorities in order to obtain authorization to use the device for setting up outdoor radio links and/or for supplying public access to telecommunications and/or network services. This device may not be used for setting up outdoor radio links in France and in some areas the RF output power may be limited to 10 mW EIRP in the frequency range of 2454 2483.5 MHz. For detailed information the end-user should contact the national spectrum authority in France.
This device may only be used indoors in the frequency bands 5150 5250 MHz and 5250 5350 MHz. This device is a 5 GHz wideband transmission system (transceiver), intended for use in all EU member states and EFTA countries under the following conditions and/or with the following restrictions:
In France and Luxembourg a limited implementation of the frequency bands 5150 5250 MHz and 5250 5350 MHz. In Luxermbourg it is not allowed to make use of the frequency band 5470 5725 MHz. End-users are encouraged to contact the national spectrum authorities in France and Luxembourg in order to obtain the latest information about any restrictions in the 5 GHz frequency band(s). esky
[Czech]
Dansk
[Danish]
Deutsch
[German]
Eesti
[Estonian]
English Espaol
[Spanish]
[Greek]
Franais
[French]
Italiano
[Italian]
[Advantech] tmto prohlauje, e tento [MARS-3100S] je ve shod se zkladnmi poadavky a dalmi pslunmi ustanovenmi smrnice 1999/5/ES. Undertegnede [Advantech] erklrer herved, at flgende udstyr [MARS-3100S] overholder de vsentlige krav og vrige relevante krav i direktiv 1999/5/EF. Hiermit erklrt [Advantech], dass sich das Gert [MARS-3100S] in bereinstimmung mit den grundlegenden Anforderungen und den brigen einschlgigen Bestimmungen der Richtlinie 1999/5/EG befindet. Kesolevaga kinnitab [Advantech] seadme [MARS-3100S] vastavust direktiivi 1999/5/E phinuetele ja nimetatud direktiivist tulenevatele teistele asjakohastele stetele. Hereby, [Advantech], declares that this [MARS-3100S] is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. Por medio de la presente [Advantech] declara que el [MARS-3100S] cumple con los requisitos esenciales y cualesquiera otras disposiciones aplicables o exigibles de la Directiva 1999/5/CE.
[Advantech] [MARS-3100S]
1999/5/. Par la prsente [Advantech] dclare que l'appareil [MARS-3100S] est conforme aux exigences essentielles et aux autres dispositions pertinentes de la directive 1999/5/CE. Con la presente [Advantech] dichiara che questo [MARS-3100S] conforme ai requisiti essenziali ed alle altre disposizioni pertinenti stabilite dalla direttiva 1999/5/CE. Latviski Ar o [Advantech] deklar, ka [MARS-3100S] atbilst Direktvas 1999/5/EK btiskajm prasbm
[Latvian]
un citiem ar to saisttajiem noteikumiem. Lietuvi
[Lithuanian]
iuo [Advantech] deklaruoja, kad is [MARS-3100S] atitinka esminius reikalavimus ir kitas 1999/5/EB Direktyvos nuostatas. Nederlands
[Dutch]
Malti
[Maltese]
Hierbij verklaart [Advantech] dat het toestel [MARS-3100S] in overeenstemming is met de essentile eisen en de andere relevante bepalingen van richtlijn 1999/5/EG. Hawnhekk, [Advantech], jiddikjara li dan [MARS-3100S] jikkonforma mal-tiijiet essenzjali u ma provvedimenti orajn relevanti li hemm fid-Dirrettiva 1999/5/EC. Magyar
[Hungarian]
Alulrott, [Advantech] nyilatkozom, hogy a [MARS-3100S] megfelel a vonatkoz alapvet kvetelmnyeknek s az 1999/5/EC irnyelv egyb elrsainak. Polski
[Polish]
Niniejszym [Advantech] owiadcza, e [MARS-3100S] jest zgodny z zasadniczymi wymogami oraz pozostaymi stosownymi postanowieniami Dyrektywy 1999/5/EC. Portugus
[Portuguese]
[Advantech] declara que este [MARS-3100S] est conforme com os requisitos essenciais e outras disposies da Directiva 1999/5/CE. Slovensko
[Slovenian]
[Advantech] izjavlja, da je ta [tip opreme] v skladu z bistvenimi zahtevami in ostalimi relevantnimi doloili direktive 1999/5/ES. Slovensky
[Slovak]
[Advantech] tmto vyhlasuje, e [tip opreme] spa zkladn poiadavky a vetky prslun ustanovenia Smernice 1999/5/ES. Suomi
[Finnish]
[Advantech] vakuuttaa tten ett [tip opreme] tyyppinen laite on direktiivin 1999/5/EY oleellisten vaatimusten ja sit koskevien direktiivin muiden ehtojen mukainen. Svenska
[Swedish]
Hrmed intygar [Advantech] att denna [tip opreme] str I verensstmmelse med de vsentliga egenskapskrav och vriga relevanta bestmmelser som framgr av direktiv 1999/5/EG. Technical Support and Assistance 1. Visit the Advantech web site at www.advantech.com/support where you can find the latest information about the product. 2. Contact your distributor, sales representative, or Advantechs customer service center for technical support if you need additional assistance. Please have the following information ready before you call:
Product name and serial number
Description of your peripheral attachments
Description of your software (operating system, version, application software, etc.)
A complete description of the problem
The exact wording of any error messages Warnings, Cautions and Notes Warning! Warnings indicate conditions, which if not observed, can cause personal injury!
Caution! Cautions are included to help you avoid damaging hardware or losing data. e.g. There is a danger of a new battery exploding if it is incorrectly installed. Do not attempt to recharge, force open, or heat the battery. Replace the battery only with the same or equivalent type recommended by the man-
ufacturer. Discard used batteries according to the manufacturers instructions. Note!
Notes provide optional additional information. Document Feedback To assist us in making improvements to this manual, we would welcome comments and constructive criticism. Please send all such - in writing to: support@advantech.com MARS-3100R/S User Manual iv Safety Instructions 4. 5. 6. 7. 9. 1. Read these safety instructions carefully. 2. 3. Disconnect this equipment from any AC outlet before cleaning. Use a damp Keep this User Manual for later reference. cloth. Do not use liquid or spray detergents for cleaning. For plug-in equipment, the power outlet socket must be located near the equip-
ment and must be easily accessible. Keep this equipment away from humidity. Put this equipment on a reliable surface during installation. Dropping it or letting it fall may cause damage. The openings on the enclosure are for air convection. Protect the equipment from overheating. DO NOT COVER THE OPENINGS. 8. Make sure the voltage of the power source is correct before connecting the equipment to the power outlet. Position the power cord so that people cannot step on it. Do not place anything over the power cord. 10. All cautions and warnings on the equipment should be noted. 11. If the equipment is not used for a long time, disconnect it from the power source to avoid damage by transient over-voltage. 12. Never pour any liquid into an opening. This may cause fire or electrical shock. 13. Never open the equipment. For safety reasons, the equipment should be opened only by qualified service personnel. If one of the following situations arises, get the equipment checked by service personnel:
14. 15. The power cord or plug is damaged. 16. Liquid has penetrated into the equipment. 17. The equipment has been exposed to moisture. 18. The equipment does not work well, or you cannot get it to work according to the users manual. 19. The equipment has been dropped and damaged. 20. The equipment has obvious signs of breakage. 21. DO NOT LEAVE THIS EQUIPMENT IN AN ENVIRONMENT WHERE THE STORAGE TEMPERATURE MAY GO BELOW -10 C (-4 F) OR ABOVE 55 C
(140 F). THIS COULD DAMAGE THE EQUIPMENT. THE EQUIPMENT SHOULD BE IN A CONTROLLED ENVIRONMENT. 22. CAUTION: DANGER OF EXPLOSION IF BATTERY IS INCORRECTLY REPLACED. REPLACE ONLY WITH THE SAME OR EQUIVALENT TYPE RECOMMENDED BY THE MANUFACTURER, DISCARD USED BATTERIES ACCORDING TO THE MANUFACTURERS INSTRUCTIONS. 23. The sound pressure level at the operators position according to IEC 704-1:1982 is no more than 70 dB (A). DISCLAIMER: This set of instructions is given according to IEC 704-1. Advantech disclaims all responsibility for the accuracy of any statements contained herein. v MARS-3100R/S User Manual Wichtige Sicherheishinweise Bitte lesen sie Sich diese Hinweise sorgfltig durch. 1. 2. Heben Sie diese Anleitung fr den spteren Gebrauch auf. 3. Vor jedem Reinigen ist das Gert vom Stromnetz zu trennen. Verwenden Sie Keine Flssig-oder Aerosolreiniger. Am besten dient ein angefeuchtetes Tuch zur Reinigung. 4. Die NetzanschluBsteckdose soll nahe dem Gert angebracht und leicht zugnglich sein. 5. Das Gert ist vor Feuchtigkeit zu schtzen. 6. Bei der Aufstellung des Gertes ist auf sicheren Stand zu achten. Ein Kippen oder Fallen knnte Verletzungen hervorrufen. 7. Die Belftungsffnungen dienen zur Luftzirkulation die das Gert vor berhit-
8. 9. zung schtzt. Sorgen Sie dafr, daB diese ffnungen nicht abgedeckt werden. Beachten Sie beim. AnschluB an das Stromnetz die AnschluBwerte. Verlegen Sie die NetzanschluBleitung so, daB niemand darber fallen kann. Es sollte auch nichts auf der Leitung abgestellt werden. 10. Alle Hinweise und Warnungen die sich am Gerten befinden sind zu beachten. 11. Wird das Gert ber einen lngeren Zeitraum nicht benutzt, sollten Sie es vom Stromnetz trennen. Somit wird im Falle einer berspannung eine Beschdigung vermieden. 12. Durch die Lftungsffnungen drfen niemals Gegenstnde oder Flssigkeiten in das Gert gelangen. Dies knnte einen Brand bzw. elektrischen Schlag aus-
lsen. 13. ffnen Sie niemals das Gert. Das Gert darf aus Grnden der elektrischen Sicherheit nur von authorisiertem Servicepersonal geffnet werden. 14. Wenn folgende Situationen auftreten ist das Gert vom Stromnetz zu trennen und von einer qualifizierten Servicestelle zu berprfen:
15. Netzkabel oder Netzstecker sind beschdigt. 16. Flssigkeit ist in das Gert eingedrungen. 17. Das Gert war Feuchtigkeit ausgesetzt. 18. Wenn das Gert nicht der Bedienungsanleitung entsprechend funktioniert oder Sie mit Hilfe dieser Anleitung keine Verbesserung erzielen. 19. Das Gert ist gefallen und/oder das Gehuse ist beschdigt. 20. Wenn das Gert deutliche Anzeichen eines Defektes aufweist. 21. VOSICHT: Explisionsgefahr bei unsachgemaben Austausch der Batterie.Ersatz nur durch densellben order einem vom Hersteller empfohlene-mahnlichen Typ. Entsorgung gebrauchter Batterien navh Angaben des Herstellers. 22. ACHTUNG: Es besteht die Explosionsgefahr, falls die Batterie auf nicht fach-
mnnische Weise gewechselt wird. Verfangen Sie die Batterie nur gleicher oder entsprechender Type, wie vom Hersteller empfohlen. Entsorgen Sie Batterien nach Anweisung des Herstellers. 23. Der arbeitsplatzbezogene Schalldruckpegel nach DIN 45 635 Teil 1000 betrgt 70dB(A) oder weiger. Haftungsausschluss: Die Bedienungsanleitungen wurden entsprechend der IEC-
704-1 erstellt. Advantech lehnt jegliche Verantwortung fr die Richtigkeit der in diesem Zusammenhang gettigten Aussagen ab. MARS-3100R/S User Manual vi Safety Precaution - Static Electricity Follow these simple precautions to protect yourself from harm and the products from damage.
! To avoid electrical shock, always disconnect the power from your PC chassis before you work on it. Dont touch any components on the CPU card or other cards while the PC is on.
! Disconnect power before making any configuration changes. The sudden rush of power as you connect a jumper or install a card may damage sensitive elec-
tronic components. Product Labelling vii MARS-3100R/S User Manual Contents Chapter 1 1.1 1.2 1.3 Chapter 1.4 2 2.1 2.2 2.3 2.4 2.5 2.6 2.7 2.8 2.9 Figure 2.3 Figure 2.2 Figure 2.7 Figure 2.6 Figure 2.4 Figure 2.5 Introduction..........................................1 Welcome ................................................................................................... 2 About this Manual ..................................................................................... 2 System Specifications ............................................................................... 3 Table 1.1: System Specifications ................................................ 3 Environmental Standards.......................................................................... 4 Table 1.2: Environmental Standards ........................................... 4 Getting Started.....................................5 Check the Package ................................................................................... 6 Figure 2.1 Mars 3100R/S and Accessories .............................. 6 General Views of the Tablet PC................................................................ 7 2.2.1 Tablet front view............................................................................ 7 Front view................................................................ 7 2.2.2 Tablet back view ........................................................................... 7 Back view ................................................................ 7 2.2.3 Tablet front edge view................................................................... 8 Front edge view....................................................... 8 2.2.4 Tablet back edge view .................................................................. 8 Rear edge view........................................................ 8 2.2.5 Tablet right edge view................................................................... 8 Right edge view....................................................... 8 2.2.6 Tablet left edge view ..................................................................... 8 Left edge view ......................................................... 8 LED Signals .............................................................................................. 9 Status LEDs............................................................. 9 2.3.1 Power ON/OFF LED ..................................................................... 9 2.3.2 Battery status LED:....................................................................... 9 2.3.3 HDD status LED:......................................................................... 10 2.3.4 Wireless LAN ON/OFF LED:....................................................... 10 Buttons .................................................................................................... 11 Buttons on the front bezel...................................... 11 2.4.1 Key button................................................................................... 11 2.4.2 Display rotation button ................................................................ 11 2.4.3 5-way navigation button.............................................................. 11 2.4.4 Hotkey buttons............................................................................ 11 Powering the tablet PC ........................................................................... 12 2.5.1 Battery Power ............................................................................. 12 Figure 2.10 Inserting the battery pack ...................................... 12 Figure 2.11 Replacing the screws ............................................ 12 Figure 2.12 Inserting the DC jack ............................................. 13 2.5.2 AC Power.................................................................................... 14 Starting the tablet PC .............................................................................. 14 Figure 2.13 Auto touchscreen calibration ................................. 14 Manual Touchscreen Calibration ............................................................ 15 Figure 2.14 Accessing the Configuration Utility........................ 15 Figure 2.15 Calibrating the touchscreen................................... 15 Figure 2.16 4 points calibration................................................. 15 Figure 2.17 Draw test ............................................................... 16 Using the Pen.......................................................................................... 17 Figure 2.18 Using the pen ........................................................ 17 Connecting Peripherals........................................................................... 18 2.9.1 USB ports.................................................................................... 18 Figure 2.8 Figure 2.9 ix MARS-3100R/S User Manual Chapter 2.10 2.11 3 3.1 3.2 3.3 3.4 3.5 3.6 2.9.5 Figure 3.7 Figure 3.6 Figure 3.1 Figure 3.2 Figure 3.3 Figure 3.4 Figure 3.5 Figure 2.19 USB port................................................................ 18 2.9.2 COM ports .................................................................................. 18 Figure 2.20 COM port............................................................... 18 2.9.3 Audio jacks ................................................................................. 19 Figure 2.21 Audio Jacks (Red: input and Green: output) ......... 19 2.9.4 VGA port..................................................................................... 19 Figure 2.22 VGA port................................................................ 19 LAN port...................................................................................... 20 Figure 2.23 LAN port ................................................................ 20 Setting the Time and Date ...................................................................... 20 Power Management................................................................................ 20 2.11.1 Suspend...................................................................................... 20 2.11.2 Resuming.................................................................................... 21 Advantech Central Manager ............ 23 Overview ................................................................................................. 24 Central manager icons .......................................... 24 Copyright page...................................................... 24 Display .................................................................................................... 25 3.2.1 Rotation ...................................................................................... 25 Display menu......................................................... 25 Vertical display mode ............................................ 25 Horizontal display mode........................................ 26 3.2.2 Rotation button ........................................................................... 26 3.2.3 Properties ................................................................................... 26 Display properties menu........................................ 26 3.2.4 Brightness adjustments (MARS-3100R only) ............................. 27 Brightness adjustment........................................... 27 Using Hotkey Buttons ............................................................................. 28 Three hotkey buttons............................................. 28 Hotkey menu ......................................................... 28 Power...................................................................................................... 29 Figure 3.10 Power menu .......................................................... 29 3.4.1 Power button settings ................................................................. 29 3.4.2 Advanced Power settings ........................................................... 31 Figure 3.11 Advanced power settings ...................................... 31 Figure 3.12 Six power schemes ............................................... 31 Figure 3.13 Power alarm options.............................................. 33 Figure 3.14 Low battery alarm options ..................................... 33 Figure 3.15 Run a program configuration dialog boxes............ 34 Figure 3.16 Critical battery alarm options................................. 34 Figure 3.17 Power meter.......................................................... 35 Figure 3.18 Detailed battery information .................................. 35 Figure 3.19 Advanced power-saving........................................ 36 Figure 3.20 Hibernate............................................................... 37 Image Version......................................................................................... 38 Figure 3.21 Image version........................................................ 38 Audio....................................................................................................... 39 Figure 3.22 Main audio menu................................................... 39 3.6.1 Sounds and Audio Devices Properties ....................................... 39 Figure 3.23 Audio menu ........................................................... 40 Figure 3.24 Volume and advanced buttons.............................. 40 Figure 3.25 Playback volume control ....................................... 40 Figure 3.26 Speaker properties................................................ 41 Figure 3.27 Performance properties......................................... 41 Figure 3.28 Sound recording menu.......................................... 42 Figure 3.29 Recording controls ................................................ 42 Figure 3.30 Advanced controls for microphone........................ 42 Figure 3.8 Figure 3.9 MARS-3100R/S User Manual x 3.8 3.7 Figure 3.31 MIDI music playback ............................................. 42 Figure 3.32 Volume menu ........................................................ 43 Figure 3.33 Speaker volume..................................................... 43 Figure 3.34 Sounds menu ........................................................ 44 Figure 3.35 Voice menu............................................................ 45 Figure 3.36 Hardware test for microphone level....................... 45 Figure 3.37 Hardware menu..................................................... 46 Figure 3.38 General menu........................................................ 46 Figure 3.39 Properties menu .................................................... 47 Figure 3.40 Driver menu........................................................... 47 Figure 3.41 Driver details.......................................................... 47 Touch ...................................................................................................... 48 Figure 3.42 Touch menu........................................................... 48 3.7.1 Touchscreen ............................................................................... 48 Figure 3.43 Touchscreen calibration ........................................ 48 Figure 3.44 Digitizer Calibration Step 1.................................... 49 Figure 3.45 Digitizer Calibration Step 2.................................... 49 Figure 3.46 Digitizer Calibration Step 3.................................... 49 Figure 3.47 Digitizer Calibration Step 4.................................... 49 Figure 3.48 Touchkit USB controller......................................... 50 Figure 3.49 Pen tablet properties menu ................................... 50 3.7.2 Mouse ......................................................................................... 51 Figure 3.50 Buttons menu ........................................................ 51 Figure 3.51 Pointers menu ....................................................... 52 Figure 3.52 Pointer options menu............................................. 52 Figure 3.53 Mouse hardware menu.......................................... 53 Figure 3.54 General USB properties ........................................ 53 Figure 3.55 USB driver properties ............................................ 54 Figure 3.56 USB power management ...................................... 54 LAN ......................................................................................................... 55 3.8.1 Properties.................................................................................... 55 Figure 3.57 Network connections ............................................. 55 Security ................................................................................................... 56 Figure 3.58 Security menu........................................................ 56 Figure 3.59 Security center....................................................... 56 4 Maintenance and Troubleshooting ..57 Care, Storage and Cleaning.................................................................... 58 4.1 4.1.1 Protect the computer from damage ............................................ 58 4.1.2 Maintain good connections ......................................................... 58 4.1.3 Prevent thermal stress................................................................ 58 4.1.4 Storing the computer................................................................... 58 4.1.5 Caring for the touchscreen display ............................................. 58 4.1.6 Cleaning the computer................................................................ 59 Replacing Components........................................................................... 60 4.2.1 Battery......................................................................................... 60 Removing the battery pack.................................... 60 4.2.2 HDD (or CF card)........................................................................ 61 HD / CF Card Port ................................................. 61 Hard Disk Drive ..................................................... 61 CF card.................................................................. 61 Correct Removal of the HDD................................. 62 Incorrect removal of the HDD ................................ 62 Unplugging the cable connector............................ 62 Removing the CF card........................................... 63 Troubleshooting ...................................................................................... 64 4.3.1 Computer will not start ................................................................ 64 4.3.2 Computer does not resume operation after suspension ............. 64 Figure 4.2 Figure 4.3 Figure 4.4 Figure 4.5 Figure 4.6 Figure 4.7 Figure 4.8 Figure 4.1 4.2 4.3 3.9 xi MARS-3100R/S User Manual Chapter 4.3.3 Computer will not enter into suspension mode........................... 64 4.3.4 Computer will not shut down....................................................... 64 4.3.5 Display remains off, or is not bright ............................................ 64 4.3.6 Computer touchscreen does not respond to the pen.................. 64 4.3.7 Headphones do not emit, or volume is too low........................... 64 4.3.8 Peripherals do not respond......................................................... 64 4.3.9 The amber battery status LED is always on ............................... 65 4.3.10 The amber battery status LED is blinking................................... 65 4.3.11 The amber battery status LED is blinking quickly....................... 65 OS System Maintenance and Re-Installation ......................................... 66 4.4.1 MARS-3100S.............................................................................. 66 4.4.2 MARS-3100R.............................................................................. 66 Figure 4.9 Welcome to Windows XP...................................... 66 Figure 4.10 XP setup icon ........................................................ 67 Figure 4.11 Install Windows XP................................................ 67 4.4 INDEX MARS-3100R/S User Manual xii Chapter 1 1Introduction This chapter gives basic data about the specifications and use of the MARS-3100R/S Tablet PC. Sections include:
! Welcome
! About this Manual
! System Specifications
! Environmental Standards 1.1 Welcome Congratulations on selecting the MARS-3100R/S Rugged Tablet PC, supported by Microsoft Windows XP Embedded. This unique tablet PC offers a special combina-
tion of features that make it an ideal partner for a wide range of applications. The main features of the MARS-3100R/S are:
! AMD LX800, 500MHz, or Intel Pentium Duo Core Ultra Low Voltage U2500 1.2Ghz
! Graphical performance: AMD LX800 built-in, or Intel 945GME
! 10.4 SVGA / XGA TFT monitor built-in
! 2.5 shock mounted HDD or Industrial CF card for storage
! Internal mini-PCI
! 5-way navigation key and 3 programmable function keys
! Multiple I/O ports: 2x USB2.0, (1x USB 2.0 for MARS-3100S), 1x COM, 1x LAN and 1x VGA
! Full-featured Hi-resolution audio support with audio jacks and an integrated speaker 1.2 About this Manual The following chapters contained in this manual are:
! Chapter 1: Introduction - General information about the tablet PC.
! Chapter 2: Getting Started - Basic functions of the tablet PC.
! Chapter 3: The Central Manager - Using the system management software included with the tablet PC.
! Chapter 4: Maintenance and Troubleshooting - How to maintain, calibrate and replace components; a troubleshooting FAQ details how to diagnose and correct typical problems. MARS-3100R/S User Manual 2 C h a p t e r 1 I n t r o d u c t i o n 1.3 System Specifications The MARS-3100R/S meets the following specifications. Unless otherwise noted, all the specifications listed below are subject to change without prior notification. Table 1.1: System Specifications Features MARS-3100S MS XP Embedded OS Dimension W D H Weight Panel MARS-3100R MS XP Professional 293 x 210 x 38mm 10.4 SVGA TFT 2.1 kg Touchscreen CPU DRAM L2 cache Chipset Graphic Storage Keypad Communication and Navigation Wireless WAN PAN I/O Microphone Jack Headset Jack RS232 USB RJ-45 DC-in VGA D_sub connector Docking / Port Replicator Audio AC97 Audio I/F Speaker Power Battery Battery Life Charging Time Backup Battery Adapter USB2.0 x 1 AC97 Audio I/F Resistant touchscreen AMD LX800 500MHz 256/512MB DDR400 (One memory module support) 128 K AMD CS5536 AMD LX800 with shared memory 4G CF (2.5" shock mounted HDD option) 10.4 XGA TFT
(Sunlight readable option) Digitizer / Resistant touchscreen Intel Pentium Duo Core Ultra Low Voltage U2500 1.2Ghz 1GB DDRII533 (One memory module support) 1 MB Intel 945GME Intel 945GME with shared memory 2.5 shock mounted HDD (CF stor-
age option) 5-way navigation key; 3x function key (programmable) 802.11 a/b/g Bluetooth V2.0/EDR (optional) Bluetooth V2.0/EDR (default) Yes Yes Yes (COM 3) USB2.0 x 2 10/100 Base-T Yes Yes Yes HD Audio I/F One integrated speaker 3 hour battery life 2.5 hours to 90%
Removable 11.1V@3600mAh Li-ion battery pack; warm swap-
pable Auto-switching 100-240V, 50 ~60 Hz; supplies 19VDC at 3.42A 7.2V, 120mAh 3 MARS-3100R/S User Manual 1.4 Environmental Standards Table 1.2: Environmental Standards Environmental Operational Parameters Operation Temperature 0 C to 50 C
-10 C to 55 C*
* Battery mode:
0C @ 50% Battery capacity.
* Adapter mode: Any
( MIL-STD 810F Methods 501.4 and 502.4 ) Storage Temperature -20 C to 60 C
-40 C to 75 C
( MIL-STD 810F Methods 501.4 and 502.4 ) Thermal Shock 1.5 C < 5 C / minute over 0 C to 50 C verified during MILSTD810F testing 1.5C < 5 C / minute over -10 C to 55 C verified during MILSTD810F testing Operational Humidity 0% to 95% non-condensing MIL-STD810F Method 507.4 0% to 95% non-condensing MIL-STD810F Method 507.4 Storage Humidity IP-54 IP Rating 3 foot high free drop survival limit, (test surface: concrete, base unit Drop only). According to MIL-STD-810F, Method 516.5 Shock and Pressure Mechanical Shock Vibration Low Pressure Agency Approvals EMC EMS Safety 20g, 11ms, Terminal sawtooth, operating. 40g, 11ms, Terminal sawtooth, non-operating MIL-STD-810F method 516.5
- Operation By CF: MIL-STD 810F Methods 514.5C-3 By HDD: MIL-STD 810F Methods 514.5C-1
- Non-operation 0.04g^2/Hz, 20Hz - 1000Hz, -6dB/octave 1000Hz - 2000Hz, MIL- STD-810F method 514.5C-17
-15,000 ft.: in accordance with MIL-STD810F; Method 500.4, Proce-
dure I
- EN55022 Class B
- EN55011 Class A
- FCC Part15 Class B
- DOC Class B
- Contact: 4Kv/ Air: 8Kv, EN55024
- UL / cUL, UL60950-1
- CB, IEC/EN60950-1 MARS-3100R/S User Manual 4 Chapter 2 2Getting Started This chapter details basic functions of the tablet PC and how to use it for the first time. Sections include:
! Check the Package
! General Views of the Tablet PC
! LED Indicator Signal Table
! Powering the tablet PC
! Starting the tablet PC
! Manual Touchscreen Calibration
! Using the Pen
! Connecting Peripherals
! Setting the Time and Date
! Power Management
! Resetting System Defaults
! Disposing of Used Batteries 2.1 Check the Package Each new MARS-3100R/S comes equipped with a range of product accessories and materials. Figure 2.1 Mars 3100R/S and Accessories A summary of the package contents:
! MARS-3100R/S
! Battery pack
! Adapter
! Pen (for MARS-3100S) or Digitizer Pen (for MARS-3100R)
! Windows XP Professional Recovery Media CD (for MARS-3100R)
! Quick start guide MARS-3100R/S User Manual 6 2.2 General Views of the Tablet PC 2.2.1 Tablet front view Figure 2.2 Front view 2.2.2 Tablet back view HDD Cover Pen & Holder C h a p t e r 2 G e t t i n g S a r t t e d Front bezel buttons Heatsink Cover Battery Pack Figure 2.3 Back view 7 MARS-3100R/S User Manual 2.2.3 Tablet front edge view Speaker Docking Port Figure 2.4 Front edge view 2.2.4 Tablet back edge view Power On/Off Switch WLAN On/Off Switch Figure 2.5 Rear edge view 2.2.5 Tablet right edge view COM Port (COM3) SIM Slot USB Port
(for MARS-3100R only)
(for GSM/GPR/EDGE models only) 2.2.6 Tablet left edge view Figure 2.6 Right edge view Audio In Audio Out VGA Port DC Power Jack RJ45 Port USB Port Figure 2.7 Left edge view MARS-3100R/S User Manual 8 2.3 LED Signals The MARS-3100R/S is equipped with a set of Light Emitting Diodes (LEDs) located along the top edge of the front bezel. Power On/Off LED HDD Status LED Battery Status LED WLAN On/Off LED Figure 2.8 Status LEDs 2.3.1 Power ON/OFF LED
! Dark: System is turned OFF
! Static Green: System is turned ON.
! Blinking Green: System is in standby mode. Note!
See section 2.11.1 for more information about using Suspend Function. 2.3.2 Battery status LED:
C h a p t e r 2 G e t t i n g S a r t t e d
! Dark:
Battery is fully charged (if the system is powered by adapter).
Battery capacity is sufficient and above the Low Battery Alarm (if the system is powered by battery).
(Default for the Low Battery Alarm is less than 10% of normal capacity.)
! Static Amber:
Battery is under-charging (if the system is powered by adapter). Note!
The Battery status LED will go off and become dark when the battery is fully charged (100%).
! Blinking Amber:
Battery is under 10% of normal capacity. Note!
10% of total available battery power is the default value for triggering the low battery alarm. Users can change this value; refer to Chapter 3.4.2.2.
! Quick Blinking Amber:
Battery error. Replace the battery. Note!
1. 2. Battery errors indicate the temperature of the battery is out of acceptable range. Place the MARS-3100 in a normal environment. The battery may defective. Contact technical support office. 9 MARS-3100R/S User Manual 2.3.3 HDD status LED:
! Dark: HDD is idle.
! Blinking: HDD is active. Note!
Prevent any shocks or vibrations whenever the HDD status LED is blink-
ing. Violent shocks may cause damage to the HDD, and data loss. 2.3.4 Wireless LAN ON/OFF LED:
! Dark: Wireless LAN is disabled
! Static Green: Wireless LAN is enabled MARS-3100R/S User Manual 10 C h a p t e r 2 G e t t i n g S a r t t e d 2.4 Buttons Key button Display rotation button 5-way navigation button Hotkey buttons R F 1 F 2 F 3 Figure 2.9 Buttons on the front bezel 2.4.1 Key button The Key button functions as equivalent to the Ctrl + Alt + Del key combination under the MARS-3100S/R default OS environment, Windows XP Embedded or Windows XP Professional. 2.4.2 Display rotation button The rotation button is the hotkey for rotating the display on the screen. 2.4.3 5-way navigation button The 5-way navigation button function as directional arrow keys: Up, Down,
Right, and Left. The navigation button is useful for navigating controls in various applications. Pressing the center part of the button is equivalent to hitting the Enter key. 2.4.4 Hotkey buttons The F1 to F3 buttons are programmable hotkeys. Note!
See Chapter 3.2.2, 3.3 for more information about setting up hotkeys and using buttons. 11 MARS-3100R/S User Manual 2.5 Powering the tablet PC 2.5.1 Battery Power The MARS-3100R/S tablet PC is supplied with a powerful rechargeable battery. To install and maintain the battery, or if it needs to be replaced, follow the instructions in this section. Caution! Do not attempt to replace the battery with any others than the models recommended and manufactured specifically for this tablet PC. Note!
Before using MARS-3100 Tablet PC, please connect the adapter into MARS-3100R/S to charge the battery and backup battery at least 24Hrs. 2.5.1.1 Installing a Battery The battery is designed specifically for installation with the MARS-3100R/S tablet PC. It fits exactly into the back of the PC and delivers precisely the exact voltage required to power the unit. Under normal conditions, a fully charged battery will power the PC for up to 3 hours. Normally, it requires 2.5 hours to fully charge a new battery.
! To install or replace the battery:
1. 2. Disconnect any peripheral devices from the MARS-3100R/S. 3. Unfasten the two large flathead screws and remove the battery. 4. Turn off the MARS-3100R/S Insert the new battery pack. 5. Fasten the two flathead battery cover screws. Figure 2.10 Inserting the battery pack Figure 2.11 Replacing the screws MARS-3100R/S User Manual 12 C h a p t e r 2 G e t t i n g S a r t t e d 2.5.1.2 Charging the battery using a power adapter 1. Connect the AC cord to a power source. 2. 3. Plug the AC power cord into the receptacle on the DC power adapter. Insert the DC jack into the receptacle on the left side of the tablet PC. Figure 2.12 Inserting the DC jack 4. After inserting the DC jack, the LED indicator will light (RED) indicating that bat-
tery charging is functional and normal. 2.5.1.3 Swapping the battery pack If the battery is exhausted, it can be hot-swapped for a fully charged battery without interrupting current work. 1. Get another fully charged battery on hand. 2. 3. 4. Release the two large flathead screws and remove the battery. 5. Replace the battery and refasten the two large flathead screws. 6. Resume operation of the system. (See 2.11.2) Save all current files and data. Put the MARS-3100 into Standby Mode. (See 2.11.1) Note!
1. 2. After removing the battery, the system will still be powered by an inter-
nal backup battery. It can maintain system power for only 3 minutes. Before using the hot-swapped battery function, plug the adapter into MARS-3100R/S to charge the internal backup battery at least 24 hrs. Caution!
If more than 3 minutes duration elapses between Step 4 and Step 5, removing and replacing the battery, any unsaved data will be lost. 2.5.1.4 Disposing of Used Batteries The battery supplied with the MARS-3100RS is a rechargeable, Lithium Ion dry cell. Dispose of used batteries in accordance with local government regulations. Under Federal, state, or local law, it may be illegal to put batteries in the trash. Contact your system administrator or the municipal solid waste disposal department for info. The battery should be delivered to a reputable recycler or governmental agency, which are adequately equipped to recycle the chemicals inside the battery. If the battery wears out, order a new one. 13 MARS-3100R/S User Manual 2.5.2 AC Power The MARS-3100R/S can be powered exclusively with the supplied AC 19V adapter. It is not recommended to use any other adapter than the one supplied with the tablet PC. 2.6 Starting the tablet PC 1. 2. 3. Press the power button once to turn on the tablet PC. After powering up for the first time, the system prompts the user to engage the touchscreen calibration. Follow the onscreen instructions to calibrate the touchscreen. Note!
The user may need to press the power button longer than 1 second for battery only mode. Caution! 1. Dont press the button longer than 4 seconds; it will cause the MARS-3100R/S to shutdown immediately and crash data on the HDD. The Power LED will illuminate (Green) if the system is powered. 2. Figure 2.13 Auto touchscreen calibration MARS-3100R/S User Manual 14 2.7 Manual Touchscreen Calibration 1. To initiate touchscreen calibration manually, navigate via the start command and click on the icon, Configuration Utility. Figure 2.14 Accessing the Configuration Utility 2. In the Tools dialog, click on 4 Points Calibration to align the touchscreen. C h a p t e r 2 G e t t i n g S a r t t e d Figure 2.15 Calibrating the touchscreen 3. Follow the onscreen instructions to calibrate the touchscreen. Figure 2.16 4 points calibration 15 MARS-3100R/S User Manual 4. Return to the Tools dialog; select Linearization for 9 points linearization, and fol-
low the onscreen instructions; then, return to the Tools dialog again and try the Draw Test. Figure 2.17 Draw test MARS-3100R/S User Manual 16 C h a p t e r 2 G e t t i n g S a r t t e d 2.8 Using the Pen The touchscreen pen is a tool supplied with the MARS-3100R/S. It is used exclu-
sively as a control device for the touchscreen. It resembles a regular ballpoint pen. Instead of a regular onscreen cursor, the pen contacts the surface of the screen. Onscreen objects may be activated or moved with the pen. Whenever using the pen, do not press too hard on the touchscreen. Only moderate pressure is required to acti-
vate touchscreen sensors. The pen is configured to function much like an ordinary PC mouse.
! Touch, hold and drag: To move an object from one part of the screen to another, or to copy an object from the desktop to another memory device, place the tip of the pen onto the object and hold it while dragging the object across the screen to the desired location.
! Double-click: Tap the pen twice on an onscreen object to activate a program, or to open a selected folder. Figure 2.18 Using the pen 17 MARS-3100R/S User Manual 2.9 Connecting Peripherals The MARS-3100R/S supports several peripheral connections. 2.9.1 USB ports Figure 2.19 USB port 2.9.2 COM ports The COM port of MARS-3100R/S is COM3. Figure 2.20 COM port MARS-3100R/S User Manual 18 2.9.3 Audio jacks Figure 2.21 Audio Jacks (Red: input and Green: output) 2.9.4 VGA port C h a p t e r 2 G e t t i n g S a r t t e d Figure 2.22 VGA port 19 MARS-3100R/S User Manual 2.9.5 LAN port 2.10 Setting the Time and Date Figure 2.23 LAN port Whenever the system timer is not matched with your location or time zone, please reset the time and date by following step:
1. Click START > Control Panel, or START > Settings > Control panel 2. Double click the Date and Time Properties. 3. 4. Click OK to save and exit. Select the correct day, month and year. 2.11 Power Management 2.11.1 Suspend Suspend-to-RAM (Standby mode) To save battery power, or when swapping battery packs, put the MARS-3100R/S into Suspend Mode. There are two suspend modes: Suspend-to-RAM (Standby mode) and Suspend to HDD (Hibernation mode). 1. Suspend-to-RAM occurs when a system enters a low-power state. Information on system configuration, open applications and active files are stored in the main mem-
ory. Most other system components are shut-off. In this mode, although power consumption is very low, the battery may drain and cause data loss. If the MARS-3100R/S is stored for durations longer than a few hours or overnight, it is best simply to turn off the computer instead of using Suspend-to-
RAM mode. Note!
The Power LED blinks green. (See chapter 2.3.1) MARS-3100R/S User Manual 20 Suspend-to-Disk (Hibernation mode) 2. Instead of saving data temporarily to RAM, Suspend-to-Disk mode saves data on the hard disk. Also, power consumption is the same as the system is turn off. In this mode, all data will store in hard disk, so there is no risk to loss data if the battery is exhausted. Note!
! The Power LED will shut off.
! Suspend to Disk mode will take much time to finish the data saving than Suspend to RAM. System will auto shutdown after all data is saved. 2.11.2 Resuming When the system is in suspend mode, press the power button once, and the system will resume to normal operation again. Note!
It may be necessary to log-on again after the system has resumed. C h a p t e r 2 G e t t i n g S a r t t e d 21 MARS-3100R/S User Manual Chapter 3 3Advantech Central Manager This chapter explains how to use the Advantech Central Manager program application. Sections include:
! Overview
! Display
! Hotkeys
! Power
! Image Version
! Audio
! Touch
! LAN
! Security 3.1 Overview The Advantech Central Manager utility is configures settings, operate devices and adjust the MARS-3100R/S. The Central Manager provides user-friendly functions.
! Display settings
! Screen resolutions
! Hotkey assignments
! Power management
! Audio & touchscreen controls
! LANs
! Network security The Central Manager utility is available from the taskbar in the bottom right corner of the Windows desktop. Double click the white and blue A icon. Access is also available from the Control Panel. (See figure 3.1) System tray: double click Figure 3.1 Central manager icons The Advantech Central Manager displays a menu with several tabs, including the software Copyright page. Figure 3.2 Copyright page MARS-3100R/S User Manual 24 3.2 Display 3.2.1 Rotation Users may change the orientation of the desktop display on MARS-3100R/S. In the Display menu, the Rotation control toggles horizontal (landscape) or vertical (por-
trait) display modes. The orientation of the display switches relative to the horizontal and vertical axis of the tablet PC. Figure 3.3 Display menu Click Left Rotation to switch the display to the vertical axis (portrait display mode). If the left rotation button is clicked again, the orientation rotates again in a counter-clockwise direction: vertical to horizontal to vertical to horizontal. C h a p t e r 3 A d v a n t e c h C e n t r a l M a n a g e r Figure 3.4 Vertical display mode 25 MARS-3100R/S User Manual Click Right Rotation to switch the display to the horizontal axis (land-
scape display mode). If the right rotation button is clicked again, the orientation rotates again in a clockwise direction: vertical to horizontal to vertical to horizontal. Figure 3.5 Horizontal display mode 3.2.2 Rotation button Users may quickly change the orientation of the display by click-
ing the R key, located on the upper right side of the bezel, second from the top. R 3.2.3 Properties Click Properties menu. to open the Windows Display Properties Figure 3.6 Display properties menu MARS-3100R/S User Manual 26 3.2.4 Brightness adjustments (MARS-3100R only) MARS-3100R has a brightness adjustment control feature. To adjust the intensity of the display, use the pen to click right for brighter, or click left for darker. Figure 3.7 Brightness adjustment C h a p t e r 3 A d v a n t e c h C e n t r a l M a n a g e r 27 MARS-3100R/S User Manual 3.3 Using Hotkey Buttons The MARS-3100R/S features a handy hotkey command control sys-
tem. Three F hotkey buttons are available on the front bezel. These keys may be set to open software applications instantly. F1 F2 F3 Figure 3.8 Three hotkey buttons Select the Hotkey menu to configure hotkey-activated software applications. Figure 3.9 Hotkey menu Click cutable file, for example: osk.exe. Then click OK. to open a browser window. Search for, and select the required exe-
Then press and software. to accept the change and load the hotkey assignments Note!
! The acceptable file format is .exe.
! The default setting of F1 hotkey is OSK (On Screen Keyboard). Users can reconfigure the F1 hotkey to other functions.
! Pressing restores the previous settings for the F1, F2 and F3 hotkeys. MARS-3100R/S User Manual 28 C h a p t e r 3 A d v a n t e c h C e n t r a l M a n a g e r 3.4 Power The Power menu sets up a variety of convenient power schemes, including precise configuration of the power button and low battery alarms. Figure 3.10 Power menu 3.4.1 Power button settings The main power button, located on the top right side of the MARS-3100R/S, may be set to carry out four commands. The Power Button command on the Power menu supports four options.
! Do nothing
! Ask me what to do
! Standby
! Shut down (the default setting) 3.4.1.1 Shut down When Shut down is selected, pressing the main power button once results in an automatic system shut down. All applications are closed automatically and the unit powers off. Note!
If Shut down is selected, all unsaved data will be lost when the system powers off. 3.4.1.2 Do nothing When Do nothing is selected, pressing the power button once has no effect on the operation of the computer. In order to power off, return to the Power menu and reset the Power Button field to Shut down. Then, the MARS-3100R/S powers down using the power button. Even if Do nothing is selected, it is always possible to shut down the computer by clicking Shut Down from the Windows Start menu. 29 MARS-3100R/S User Manual 3.4.1.3 Ask me what to do When Ask me what to do is selected, the computer presents a Shut Down Win-
dows menu and four command choices. Selecting the desired option and the com-
mand is carried out after <Enter> is pressed.
! Log-off Administrator
! Shut down
! Restart
! Stand by 3.4.1.4 Standby When Standby is selected, pressing the power button places the computer into temporary hibernation and power-saving mode. In Standby, the screen goes blank, but all applications and current data are preserved in a steady-state. Pressing the power button again reactivates all systems, and restores the display and applica-
tions to the same state as they were before Standby was selected. By default, the user will be asked to re-enter log-on data to protect the security and integrity of the system. Pressing the Key button or the Ctl-Alt-Del key combo presents the Sign-on menu and the user must key-in log-on data. MARS-3100R/S User Manual 30 3.4.2 Advanced Power settings The MARS-3100R/S supports a variety of precise power settings.
! Power Schemes
! Alarms
! Power Meter
! Advanced
! Hibernate Click Advanced on the main Power menu to open the Power Options Properties menu of the Central Manager. Figure 3.11 Advanced power settings 3.4.2.1 Power schemes The first tab in Power Options Properties menu displays the Power schemes menu, which offers a selection of power options that are intended to conserve elec-
tricity or battery life whenever the computer is idle, but not completely shut-down. Six Power scheme options are available; it is possible to modify and save the default settings of each scheme from these menus. C h a p t e r 3 A d v a n t e c h C e n t r a l M a n a g e r Figure 3.12 Six power schemes 31 MARS-3100R/S User Manual 3.4.2.1.1 Home/Office Desk Selection defaults for this setting.
! Turns off monitor: After 20 minutes (Plugged in); After 5 minutes (Batteries)
! Turns off hard disks: Never (Plugged in); After 10 minutes (Batteries)
! System Standby: Never (Plugged in); After 5 minutes (Batteries) 3.4.2.1.2 Portable/Laptop Selection defaults for this setting.
! Turns off monitor: After 15 minutes (Plugged in); After 5 minutes (Batteries)
! Turns off hard disks: After 30 minutes (Plugged in); After 5 minutes (Batteries)
! System Standby: After 20 minutes (Plugged in); After 5 minutes (Batteries) 3.4.2.1.3 Presentation Selection defaults for this setting.
! Turns off monitor: Never (Plugged in); Never (Batteries)
! Turns off hard disks: Never (Plugged in); After 5 minutes (Batteries)
! System Standby: Never (Plugged in); After 15 minutes (Batteries) 3.4.2.1.4 Always on Selection defaults for this setting.
! Turns off monitor: After 20 minutes (Plugged in); After 15 minutes (Batteries)
! Turns off hard disks: Never (Plugged in); After 30 minutes (Batteries)
! System Standby: Never (Plugged in); Never (Batteries) 3.4.2.1.5 Minimal power management Selection defaults for this setting.
! Turns off monitor: After 15 minutes (Plugged in); After 5 minutes (Batteries)
! Turns off hard disks: Never (Plugged in); After 15 minutes (Batteries)
! System Standby: Never (Plugged in); After 5 minutes (Batteries) 3.4.2.1.6 Max battery Selection defaults for this setting.
! Turns off monitor: After 15 minutes (Plugged in); After 1 minute (Batteries)
! Turns off hard disks: Never (Plugged in); After 3 minutes (Batteries)
! System Standby: After 20 minutes (Plugged in); After 2 minutes (Batteries) MARS-3100R/S User Manual 32 3.4.2.2 Alarms The second tab on the Power Options Properties menu displays the Alarms menu, which offers a selection of alarm options according to two basic categories.
! Low battery alarm; (default setting is 10%.)
! Critical battery alarm; (default setting is 3%.) Figure 3.13 Power alarm options 3.4.2.2.1 Low battery alarm By default, the low battery alarm is set to trigger when the battery reaches 10% of its normal capacity. The alarm can be set to trigger according to any percentage of avail-
able battery power between 0% and 100%. Selecting Alarm action summons the Low battery alarm actions sub-menu. The default action displays a message notifying of the low power condition.
! Notification: The user may change the alarm notification settings, choosing between Sound alarm or Display message, which is the system default.
! Alarm action: The user may select the Alarm action check box to instruct the system what to do when the low battery alarm sounds, which is either Standby or Shut down. C h a p t e r 3 A d v a n t e c h C e n t r a l M a n a g e r Figure 3.14 Low battery alarm options 33 MARS-3100R/S User Manual
! Run a program: Select the checkbox, When the alarm occurs, run this pro-
gram. Then, users may choose Configure program automatically.
Three sub-menus are available for setting precise commands to manage the program.
Task: Select a program to activate when the low battery alarm triggers.
Schedule: Task programs may be activated according to the schedule required; from the Advanced sub-menu task programs may be reactivated instantly and configured to run for precise durations.
Settings: Three commands are available to refine the operation of task programs. These commands set-up what the computer will do after tasks are completed, or if the computer is idle, or if the unit is under battery power. The three settings include, Scheduled Tasks Com-
pleted, Idle Time, and Power Management. Figure 3.15 Run a program configuration dialog boxes 3.4.2.2.2 Critical battery alarm By default, the critical battery alarm is set to trigger when the battery reaches 3% of its normal capacity. The alarm trigger may be changed to any percentage of available battery power between 0% and 100%.
! Notification: The user may change the alarm notification settings, choosing between Sound alarm or Display message, the system default.
! Alarm Action: The user may activate the Alarm action checkbox to instruct the system what to do when the low battery alarm sounds, which is either Standby or Shut down. Figure 3.16 Critical battery alarm options Run a program: By selecting the checkbox, When the alarm occurs, run this pro-
gram, users may choose to Configure program automatically. (See section 3.4.2.2.1 above.) MARS-3100R/S User Manual 34 C h a p t e r 3 A d v a n t e c h C e n t r a l M a n a g e r 3.4.2.3 Power Meter The third tab on the Power Options Properties menu displays the advanced Power Meter menu, and provides information about the present status of the power system.
! Current power source: displays whether the computer is powered by AC or DC electricity.
! Battery number: Normally battery #1 is displayed. Figure 3.17 Power meter Click Battery number, to open a new dialog box: Detailed information for Battery # 1 to access precise data about the type and status of the battery currently active in the unit. Figure 3.18 Detailed battery information 35 MARS-3100R/S User Manual 3.4.2.4 Advanced The fourth tab on the Power Options Properties menu displays the Advanced power configuration options, which offer two main power-saving settings.
! Options
! Power buttons Figure 3.19 Advanced power-saving 3.4.2.4.1 Options
! Select the Always show icon on the taskbar check box to activate the Power Meter icon on the taskbar.
Double-clicking the icon opens the Power Meter menu box, (See section 3.4.2.3 above.)
! By default, Prompt for password when computer resumes from standby is selected. This command ensures that unauthorized users cannot access the computer or its data. 3.4.2.4.2 Power buttons To configure the Power and Sleep buttons, click on the drop-down box to select a command option for the following two buttons.
! Power Button options: When I press the power button on my computer.
Do nothing
Ask me what to do
Standby
Shut down (default setting)
! Sleep Button options:
No support "Sleep mode" (default setting) Note!
Normally, the Power button setting is accessed through the main Power menu. (See section: 3.4.1, Power Button Settings.) MARS-3100R/S User Manual 36
1 2 | man part 2 | Users Manual | 2.43 MiB |
3.4.2.5 Hibernate The fifth tab on the Power Options Properties menu displays the Hibernate menu, which provides the option to Enable hibernation. Figure 3.20 Hibernate 3.4.2.5.1 Hibernate check box Selecting the Enable hibernation check box activates the hibernation function. It is intended to preserve data that is currently active in the SDRAM memory, by saving it to the hard disk drive before placing the computer into hibernation. Whenever the computer is brought out of hibernation, it restores the data to its previous locations, and the whole computer resumes its previous state of activity. 3.4.2.5.2 Disk space for hibernation This box displays the Free disk space presently available on the computer and the amount of minimum disk space required to activate the Hibernate function. C h a p t e r 3 A d v a n t e c h C e n t r a l M a n a g e r 37 MARS-3100R/S User Manual 3.5 Image Version The Image version menu displays information about the status of the OS that is cur-
rently installed on the MARS-3100R/S. Normally, the OS is Microsoft Windows XP Embedded Service Pack 2. The data displayed here also details the current version of BIOS installed in the system, and its build date. Figure 3.21 Image version MARS-3100R/S User Manual 38 3.6 Audio The Audio menu displays two slider controls to adjust the volume of the speaker and the microphone. To make basic adjustments, place the pen on the slider button and move it up or down. Figure 3.22 Main audio menu 3.6.1 Sounds and Audio Devices Properties The MARS-3100R/S supports a variety of precise audio settings.
! Audio devices
! Volume
! Sounds
! Voice
! Hardware Click Properties open the Sounds and Audio Devices Properties menu. on the main Audio menu of the Central Manager to C h a p t e r 3 A d v a n t e c h C e n t r a l M a n a g e r 39 MARS-3100R/S User Manual 3.6.1.1 Audio devices The third tab on Sounds and Audio Device Properties displays the Audio menu, Figure 3.23 Audio menu Three Audio Device settings are displayed on the menu.
! Sound playback
! Sound recording
! MIDI music playback 3.6.1.1.1 Sound playback The Sound playback control sets the hardware device that controls audio signal pro-
cessing. By default, the system is set to use the Realtek AC97 Audio chipset built into the motherboard. However, if any external audio device or card is added to drive audio processing, then it is possible to select the device from this menu. Sound playback displays two important controls for fine-tuning the hardware audio device controller.
! Volume
! Advanced audio settings Figure 3.24 Volume and advanced buttons 3.6.1.1.2 Volume Click the Volume button to access the Volume Control sub-menu. Five settings may be adjusted for the sound playback device. The volume and balance of software and external devices is controlled with sliders using the pen. Figure 3.25 Playback volume control MARS-3100R/S User Manual 40 C h a p t e r 3 A d v a n t e c h C e n t r a l M a n a g e r 3.6.1.1.3 Advanced audio properties Two properties are controlled from the Advanced audio properties sub-menu.
! Speakers
The Speakers menu permits quick configuration of speakers, according to the number and type of speakers connected to the computer.
The drop-down list for Speaker setup control displays a variety of options;
select the arrangement most suited to the type of speakers already installed. Figure 3.26 Speaker properties
! Performance
The Performance menu displays Audio playback controls for adjusting the Hardware acceleration and the Sample rate. By default, both are set to the maximum possible allowance. This setting devotes more system resources to the quality of audio playback. Normally, it will not be necessary to adjust these features unless the system has trouble playing back audio. Click Restore defaults to reset the system defaults to maximum. Figure 3.27 Performance properties 41 MARS-3100R/S User Manual 3.6.1.1.4 Sound recording The Sound recording control on the Audio menu control permits fine-tuning of the recording device. By default, the system device is the onboard Realtek AC97 chipset. Sound recording also displays an important control for fine-tuning hardware devices that may be connected via the device controller.
! Volume Figure 3.28 Sound recording menu
Click the Volume button to access the Recording controls sub-menu. Four types of volume settings may be adjusted for sound recording devices, TV Tuner, CD Player, Line In and Microphone. Figure 3.29 Recording controls
Click Advanced on the Recording Control sub-menu to access the Advanced Controls for Microphone sub-menu.
Tone Controls: Adjust the bass and treble sensitivity of the microphones.
Other Controls: The audio device supports 1 Mic Boost. Select the check box to activate this effect. Figure 3.30 Advanced controls for microphone 3.6.1.1.5 MIDI music playback The MIDI music playback control permits selec-
tion of the hardware device that controls MIDI sig-
nal processing. By default, the system is set to use the Microsoft GS Wavetable SW Synth. Figure 3.31 MIDI music playback MIDI music playback also displays a volume control sub-menu that is identical to the Playback volume control; (See Figure 3.25) for fine-tuning MIDI devices. MARS-3100R/S User Manual 42 C h a p t e r 3 A d v a n t e c h C e n t r a l M a n a g e r 3.6.1.2 Volume The first tab on Sounds and Audio Device Properties menu displays the Volume menu for the current audio controller. By default, this device is a Realtek AC97 Audio chipset. Two Volume settings are displayed on the menu.
! Device volume
! Speaker settings Figure 3.32 Volume menu 3.6.1.2.1 Device volume The Device volume adjusts audio outputs and associated optional features. Use the pen and slider to set the device output volume of the AC97 controller. Click the Mute check box to silence all audio outputs. By default, the Volume icon is displayed on the taskbar. Click Advanced to access the volume control sub-menu. (See figure 3.25). 3.6.1.2.2 Speaker settings Figure 3.33 Speaker volume From the Volume menu, click Speaker Volume to open the sub-menu. The Speaker settings control makes precise adjustments the speaker volume. Slider buttons are available to adjust the speakers individually; if the Move all slide indicators check box is selected, the slid-
ers move in unison. Click Restore Default on the Speaker Volume menu to reset the volume to normal setting. to Note!
Clicking Advanced in Speaker set-
tings on the main Volume menu opens the Advanced Audio Prop-
erties sub-menu, as described in section 3.6.1.1.3, Advanced audio properties. (See page 38 above.) 43 MARS-3100R/S User Manual 3.6.1.3 Sounds The second tab on the Sounds and Audio Device Properties menu displays the Sounds menu. The sound scheme is set to the Windows default. However, it is pos-
sible to customize the sounds produced by the computer during events; and custom sound assignments may be saved as a new Sound scheme. The Sounds menu also displays a scrolling list of all events to which sounds may be assigned. Use the pen to select Program events and assign a sound (wav) file to each event from selections on the Sounds drop-down list. Figure 3.34 Sounds menu MARS-3100R/S User Manual 44 C h a p t e r 3 A d v a n t e c h C e n t r a l M a n a g e r 3.6.1.4 Voice The fourth tab on Sounds and Audio Device Properties displays the Voice menu for adjusting audio inputs and outputs when a microphone is connected to the PC. Figure 3.35 Voice menu Note!
The control settings on the Voice sub-menus, Volume and Advanced, are identical to those found in the Audio devices, section 3.6.1.1. on pages 37, 38 and 39. 3.6.1.4.1 Test hardware Click Test hardware to initiate a microphone test that will calibrate the audio levels from the microphone to the system, so that peak audio performance is attained. Follow the onscreen instructions to calibrate the microphone. Figure 3.36 Hardware test for microphone level Note!
A microphone must be connected to the computer, or the internal micro-
phone must be activated. (See Chapter 2.8, Connecting Peripherals.) 45 MARS-3100R/S User Manual 3.6.1.5 Hardware The fifth tab on Sounds and Audio Device Properties displays the Hardware menu. Several hardware devices and drivers are listed. It is possible to check the sta-
tus of each device and driver from this menu. Click Troubleshoot if device drivers are not functioning correctly. Figure 3.37 Hardware menu 3.6.1.5.1 Properties The properties of each device or driver may be displayed, checked and modified. To display device or driver properties, double-click on an item in the list, or select an item and then click Properties.
! The General menu displays details about the manufacturer, date and functional status of the selected item. Figure 3.38 General menu Note!
To access the Troubleshooting help from the Hardware menu, or any sub-menu, the MARS-3100R/S must be connected to the Internet. MARS-3100R/S User Manual 46
! The Properties menu displays a comprehensive list of all the hardware and software devices on the system. Figure 3.39 Properties menu
! The Driver menu displays a description of the manufacturer, date, version and signification of the selected device driver. The menu permits updates, rollbacks and uninstalling of drivers. C h a p t e r 3 A d v a n t e c h C e n t r a l M a n a g e r Figure 3.40 Driver menu
Click Driver Details to view a full list of all active drivers. Figure 3.41 Driver details 47 MARS-3100R/S User Manual 3.7 Touch The Touch menu displays two fields.
! Touchscreen: for Calibration of pen sensitivities and access to the Control utility, (Touchkit).
! Mouse: for accessing, testing and modifying properties. 3.7.1 Touchscreen Figure 3.42 Touch menu The Touchscreen field accesses a Calibration tool for adjusting the sensitivity of the screen to the position of the pen on the screen; a Digitizer Calibration for calibrating the sensitivity of the pen as it touches the surface of the screen; and the Control Util-
ity, which opens a link to the Touchkit USB Controller. 3.7.1.1 Calibration Click Calibration to activate the resistive touchscreen calibration tool.
! Follow the onscreen instructions to calibrate the touchscreen. Press the pen onto the middle of each X until it stops flashing and another one appears.l Figure 3.43 Touchscreen calibration MARS-3100R/S User Manual 48 C h a p t e r 3 A d v a n t e c h C e n t r a l M a n a g e r 3.7.1.2 Digitizer Calibration Click Digitizer Calibration to active the pen / digitizer calibration tool. Use the Digi-
tizer pen to click the cross on the screen step by step until the calibration process is completed. Figure 3.44 Digitizer Calibration Step 1 Figure 3.45 Digitizer Calibration Step 2 Figure 3.46 Digitizer Calibration Step 3 Figure 3.47 Digitizer Calibration Step 4 49 MARS-3100R/S User Manual 3.7.1.3 Control Utility for MARS-3100S Click Control Utility to open the Touchkit USB Controller utility. (See Chapter 2, Section 2.6 and the Help files available on the MARS-3100S; or, refer to the Support CD-ROM for printable versions of Touchkit instructions.) Figure 3.48 Touchkit USB controller 3.7.1.4 Control Utility for MARS-3100R Click Control Utility to open the Pen Tablet Properties tool to modify the sensitivity of the pen / digitizer settings, and to calibrate the pen for the MARS-3100R. Figure 3.49 Pen tablet properties menu MARS-3100R/S User Manual 50 C h a p t e r 3 A d v a n t e c h C e n t r a l M a n a g e r 3.7.2 Mouse The MARS-3100R/S supports a variety of precise Mouse settings.
! Buttons
! Pointers
! Pointer Options
! Hardware Click Mouse Properties to access the sub-menus. 3.7.2.1 Buttons The first tab on Mouse Properties is the Buttons menu. Figure 3.50 Buttons menu Three Button fields are displayed on the menu.
! Button configuration
! Double-click speed
! ClickLock 3.7.2.1.1 Button configuration Select the check box to switch the priority of the right mouse button for functions like selecting items and dragging them, instead of the left mouse button. The left mouse button also performs the same actions normally assigned to the right button if the check box is selected. 3.7.2.1.2 Double-click speed To increase the responsiveness of the mouse button whenever it is double-clicked, slide the button to the right. Then, test the response: double-click slowly and then faster; in this way it is possible to set a double-click that opens the folder displayed on the right side of the field. If the double-click speed required to open the folder is too slow or too fast, repeat the slider button adjustments until a satisfactory double-click speed is attained. 3.7.2.1.3 ClickLock Select the checkbox to enable ClickLock. To set the mouse to drag and drop items with a single click, and without having to hold down the mouse button while dragging, click the mouse button once after enabling ClickLock from this menu. 51 MARS-3100R/S User Manual 3.7.2.2 Pointers The pointers menu displays a selection of options, and offers an exceptionally wide variety of customized cursors. 3.7.2.2.1 Scheme The Scheme field displays a range of custom pointer styles. Select one scheme. Then go to the Customize field and select one pointer. It is also possible to select custom cursors from files by clicking the Browse button. Click Apply. To enable a Pointer shadow, click the Enable pointer shadow check box. Figure 3.51 Pointers menu 3.7.2.3 Pointer options Further adjustments to the performance of the pointer may be made on the Pointer Options menu. Three fields are available. 3.7.2.3.1 Motion Move the slider to control the distance that the cursor travels relative to the amount of mouse movement required. To enhance the sensitivity of the pointer for precise work, select the Enhance pointer precision check box. Figure 3.52 Pointer options menu MARS-3100R/S User Manual 52 3.7.2.3.2 Snap To To make the pointer immediately snap to the buttons in menus or dialog boxes, select the Snap to check box. 3.7.2.3.3 Visibility To enhance the visibility of the mouse pointer, select the Display pointer trails check box. If selected, the cursor displays trails as it moves. 3.7.2.4 Hardware The Hardware menu details the manufacturer and type of USB mouse controller that is installed on the computer. Click Properties to access sub-menus for adjustment of the mouse. Figure 3.53 Mouse hardware menu Note!
To access the Troubleshooting help from the Hardware menu, or any of the sub-menus, the MARS-3100R/S must be connected to the Inter-
net. 3.7.2.4.1 General USB properties The General sub-menu describes the type of touchscreen controller hardware that is installed on the system. If the device is not working properly, click Troubleshooting. C h a p t e r 3 A d v a n t e c h C e n t r a l M a n a g e r Figure 3.54 General USB properties 53 MARS-3100R/S User Manual 3.7.2.4.2 USB driver properties The Driver sub-menu describes the type of touchscreen control driver. Click Driver Details to display the name and precise location of the driver on the C:\ drive. Click Update Driver to engage the Welcome to the Hardware Update Wizard. Figure 3.55 USB driver properties Note!
Click Roll Back Driver only if the system does not function properly after attempting to update the driver. Click Uninstall only if planning to install a new USB controller device that requires a new driver. 3.7.2.4.3 USB power management The Power Management sub-menu displays two options. Select the first check box to turn off power to the mouse whenever it is idle. Select the second check box to use the mouse to turn the computer on, and bring it out of standby mode. Figure 3.56 USB power management MARS-3100R/S User Manual 54 3.8 LAN The LAN menu displays the status of the Ethernet hardware device installed on the MARS-3100R/S, including its name and connection addresses. The status of the Ethernet or Wireless will turn ON once the MARS-3100 is already connected. An
OFF message indicates that the computer is not connected. 3.8.1 Properties Click Properties to open Network Connections in an Explorer window. To configure a new connection for the first time, click Create a new connection and follow the onscreen instructions. Make sure that the addresses for network servers are handy, otherwise, making a connection will be impossible. C h a p t e r 3 A d v a n t e c h C e n t r a l M a n a g e r Figure 3.57 Network connections 55 MARS-3100R/S User Manual 3.9 Security The Security menu displays access to the Windows Security center. Figure 3.58 Security menu Click Windows Security Center to set the degree of network security. The Center offers precise control over firewalls and antivirus applications. If the computer is con-
nected to a network, it may receive automatic updates and access antivirus software. Figure 3.59 Security center MARS-3100R/S User Manual 56 Chapter 4 4Maintenance and Troubleshooting This chapter explains how to care for and maintain the Tablet PC along with a troubleshooting FAQ. Sections include:
! Care, Storage and Cleaning
! Replacing Components
! Troubleshooting
! OS Maintenance and Re-Instal-
lation 4.1 Care, Storage and Cleaning 4.1.1 Protect the computer from damage The MARS-3100R/S is built to withstand extreme conditions of high and low temper-
ature and physical shock when dropped from any side. However, the utmost care should be exercised to ensure that the computer is operated within its specific opera-
tional limits. (See section 1.4 for more information.) Note!
! Do not place heavy objects on the computer and do not subject it to undo shock or vibrations. Severe shocks can render it inoperable.
! Do not disassemble the computer; doing so may damage the unit and void the warranty. 4.1.2 Maintain good connections Periodic maintenance of all electrical connections is essential to maintain stable operation of the computer and an adequate supply of electrical current to the battery. Note!
! Keep connectors away from sources of dust or wetness.
! Check AC connections and make sure the adapter cord is firmly inserted.
! Replace any damaged power cords, broken connectors immedi-
ately if they are broken. 4.1.3 Prevent thermal stress The computer is designed to operate within a wide temperature range. However, if conditions exceed these limitations, it is advisable to stop using the computer or per-
manent damage may result. Note!
! The computer is not warranted for repair if it becomes inoperable after being subjected to extreme thermal conditions. 4.1.4 Storing the computer The computer may be stored in the off state with a fully charged battery for up to 30 days. It will continue to power up and be usable. Note!
! It is advisable to remove the battery and store it in a plastic bag if the computer will remain unused for periods in excess of 30 days. 4.1.5 Caring for the touchscreen display Use only a soft, clean cloth or lens cleaning paper to wipe the touchscreen. Wipe the screen when the power is off. MARS-3100R/S User Manual 58 4.1.6 Cleaning the computer Use a soft, clean cloth. Dampen the cloth with water and household dish detergent then wipe the housing without applying too much pressure. Note!
! Do not use alcohol or abrasive cleansers to clean either the touch-
screen or the computer.
! Use only mild, detergent-based (household) degreasers to remove oil or tar. C h a p t e r 4 M a n i t e n a n c e a n d T r o u b e s h o o l t i n g 59 MARS-3100R/S User Manual 4.2 Replacing Components After long periods of use certain components may wear out. It is always possible to replace old components. Follow these instructions to make changes. To replace other components besides the battery and the HDD, like the touchscreen, please contact technical support. 4.2.1 Battery Turn off the MARS-3100R/S 1. 2. Disconnect any peripheral devices from the MARS-3100R/S. 3. Unfasten the two large flathead screws and remove the old battery. Figure 4.1 Removing the battery pack 4. 5. Insert the new battery pack. Fasten the two flathead battery cover screws. MARS-3100R/S User Manual 60 C h a p t e r 4 M a n i t e n a n c e a n d T r o u b e s h o o l t i n g 4.2.2 HDD (or CF card) Turn off the MARS-3100R/S. The hard disk drive (or optional CF card) is accessed behind the port on the backside of the computer. 1. 2. Remove the DC adapter and Battery pack from MARS-3100R/S. 3. Disconnect any peripheral devices from the MARS-3100R/S. 4. Unfasten the four small screws and remove the cover. Figure 4.2 HD / CF Card Port 5. The HDD (or CF card) is visible after removing the cover. Figure 4.3 Hard Disk Drive Figure 4.4 CF card 61 MARS-3100R/S User Manual 6. Grasp the HDD or CF card firmly. Use two fingers on both sides on the end. Lift up. Figure 4.5 Correct Removal of the HDD Figure 4.6 Incorrect removal of the HDD Note!
! Do not grasp the HD with the thumb in the middle of the housing.
! Do not twist or bend either the HD or the CF card during removal. 7. Grasp the cable connector firmly. Unplug the connector, pulling it straight out. Figure 4.7 Unplugging the cable connector MARS-3100R/S User Manual 62 8. Remove the CF card from the slot. Figure 4.8 Removing the CF card C h a p t e r 4 M a n i t e n a n c e a n d T r o u b e s h o o l t i n g 63 MARS-3100R/S User Manual 4.3 Troubleshooting Follow the instructions below if any problems occur with basic operation of the MARS-3100R/S. If problems cannot be resolved using these instructions, please consult technical support. 4.3.1 Computer will not start
! Connect the AC adapter and/or charge the battery.
! Check to see a new battery is inserted and connected.
! Remove the battery and the AC adapter and reinstall both.
! Under conditions of extremely high or low temperature, it is possible that the computer may not function. Use the MARS-3100R/S only within its recom-
mended operational parameters. 4.3.2 Computer does not resume operation after suspension
! Check to see if the AC adapter or any peripherals have been connected or dis-
connected prior to suspension. Reconnect the AC or remove the peripherals; it may be necessary to restart the computer. 4.3.3 Computer will not enter into suspension mode
! Check to see that the computer is not connected to an active network.
! Shut off any applications that regularly access the hard drive. 4.3.4 Computer will not shut down
! Remove any peripheral devices, and try again. 4.3.5 Display remains off, or is not bright
! Make sure that the computer is turned on.
! The brightness display setting may be too low. (See section 3.2.4)
! The computer may be stuck in suspension mode.
Check AC, restart or remove peripheral devices.
! An external monitor may be installed. Disconnect it and restart. 4.3.6 Computer touchscreen does not respond to the pen
! The touchscreen may not be calibrated. (See sections: 2.5 to 2.7)
! Attach a USB device to the system, like a keyboard. If it also fails to respond, then the system may need to be reconfigured or reinstalled.
! Try restarting the computer and retest the pen before making major system changes. 4.3.7 Headphones do not emit, or volume is too low
! The volume control may be set to mute. (See section: 3.6) 4.3.8 Peripherals do not respond
! Check to see if the device is enabled or turned on.
! Check the device drivers are installed and selected in BIOS.
! Shut down the computer. Unplug the devices. Restart the computer. Plug in the devices to see if they are detected; if they are detected, they are live. MARS-3100R/S User Manual 64
If the device still does not respond, the devices, or their drives may be out of date or incorrectly installed; or, the OS/drivers/hardware may not support this particular type of peripheral device. 4.3.9 The amber battery status LED is always on
! Battery capacity is below the "Low Battery Alarm."
! Charge the battery; replace the battery if it is spent. 4.3.10 The amber battery status LED is blinking
! Battery is critically low.
! Charge the battery; replace the battery if it is spent. 4.3.11 The amber battery status LED is blinking quickly
! Battery error. Replace the battery. C h a p t e r 4 M a n i t e n a n c e a n d T r o u b e s h o o l t i n g 65 MARS-3100R/S User Manual 4.4 OS System Maintenance and Re-Installation 4.4.1 MARS-3100S The MARS-3100S is supplied with a pre-loaded OS: Microsoft Windows XP Embed-
ded, which is specially configured for MARS-3100S by Advantech programmers. If the OS on the MARS-3100S becomes damaged or crashes, please contact technical support. 4.4.2 MARS-3100R The MARS-3100R is supplied with a pre-loaded OS: Windows XP Professional. If the OS on the MARS-3100R becomes damaged or crashes, it may be necessary to re-
install Microsoft Windows XP Professional using the Recovery Media CD. The Recovery Media CD is contained in the standard MARS-3100R package. 1. Connect one CD/DVD-ROM drive to the MARS-3100R. Note!
! Recommended drive: USB external CD/DVD-ROM. 2. 3. Insert the Recovery Media CD into the CD/DVD-ROM. The CD/DVD-ROM autoplays the CD and pops up this window:
Figure 4.9 Welcome to Windows XP MARS-3100R/S User Manual 66 Note!
! If this window fails to pop up automatically, execute Setup.exe manually. Figure 4.10 XP setup icon 4. Click Install Windows XP and follow the instructions to perform a full Windows XP Professional OS installation. C h a p t e r 4 M a n i t e n a n c e a n d T r o u b e s h o o l t i n g Figure 4.11 Install Windows XP 67 MARS-3100R/S User Manual 1 Installation and removal 61 Computer 58 CE iii Central Manager 24 CF card COM ports 18 Components Replacing 60 Configuration utility 15 Copyright ii D Disk space 37 Display 25 Menu 25 Properties 26 Properties menu 26 Rotation 25 Button 26 Display rotation button 11 Do nothing 29 Draw test 16 E Environmental Standards 4 F FCC iii Features 2 Installation and removal 61 H HDD Hotkey Buttons 11, 28 Hotkeys Menu 28 I Image version Menu 38 Internet Connection INDEX 5-way navigation button 11 A About this Manual 2 AC adapter 14 Accessories 6 Alarms 33 Ask me what to do 30 Audio Performance 41 Speakers 41 Devices 40 Hardware menu 46 Properties 46 Advanced audio properties sub-menu 41 Jacks 19 Menu 39 MIDI music playback 42 Sound playback 40 Sound recording 42 Sounds 44 Sounds and Audio Devices Properties menu 39 Speaker settings 43 Test hardware 45 Voice 45 Volume 40, 43 B Battery 12 Charging 13 Critical battery alarm 34 Disposal 13 Installing 12 Low battery alarm 33 Swapping 13 Brightness 27 Buttons 11 Hotkey 28 Key 30 Power 29 C Calibration 14, 15, 48 4 points 15 Caring for Setting Up 74 K Key button 11, 30 L LAN Menu 55 Properties 55 LAN port 20 LED Signals 9 Battery status 9 HDD status 10 Power ON/OFF 9 Wireless LAN ON/OFF 10 LEDs 9 M Maintenance Cleaning 59 Connections 58 Storage 58 Thermal stress 58 Touchscreen 58 MIDI music playback 42 Mouse Buttons 51 General USB properties 53 Hardware 53 Pointer Options 52 Pointers 52 Scheme 52 USB driver properties 54 USB power management 54 Mouse settings 51 O OS MARS-3100R 66 MARS-3100S 66 P Package 6 Package contents 6 Packing List v Pen 17 Peripherals Connecting 18 Power Advanced menu 36 Advanced settings 31 Alarms 33 Button 14, 29 Configuration 36 Hibernate menu 37 Menu 29 Options Properties menu 31, 33, 35, 36, 37 Power Meter menu 35 Schemes menu 31 Power Management Suspend-to-Disk 21 Suspend-to-RAM 20 Product Labelling vii R Replacing Battery 60 Resuming 21 S Safety Instructions v Security Menu 56 Shut down 29 Sound recording 42 Specifications 3 Standby 30 Static Electricity vii System defaults Resetting 66 T Technical Support iv Time and date 20 Touch Menu 48 Mouse settings 51 Touchkit USB Controller utility 50 Touchscreen Calibration 15, 48 Troubleshooting 64 Forgotten password 65 No audio 64 No display 64 No peripheral response 64 No resumption 64 No shutdown 64 No start up 64 No suspension mode 64 Status LEDS 65 U USB ports 18 Using Hotkey Buttons 28 V VGA port 19 Views 7 Back 7 Back edge 8 Front 7 Front edge 8 Left edge 8 Right edge 8 W Warranty ii Welcome 2 www.advantech.com Please verify specifications before quoting. This guide is intended for reference purposes only. All product specifications are subject to change without notice. No part of this publication may be reproduced in any form or by any means, electronic, photocopying, recording or otherwise, without prior written permis-
sion of the publisher. All brand and product names are trademarks or registered trademarks of their respective companies.
' Advantech Co., Ltd. 2007
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2008-06-17 | 5150 ~ 5250 | NII - Unlicensed National Information Infrastructure TX | Original Equipment |
2 | 5745 ~ 5825 | DTS - Digital Transmission System |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 2 | Effective |
2008-06-17
|
||||
1 2 | Applicant's complete, legal business name |
Advantech Co Ltd
|
||||
1 2 | FCC Registration Number (FRN) |
0013543681
|
||||
1 2 | Physical Address |
No. 1, Alley 20, Lane 26, Rueiguang Road
|
||||
1 2 |
Taipei, N/A 114
|
|||||
1 2 |
Taiwan
|
|||||
app s | TCB Information | |||||
1 2 | TCB Application Email Address |
c******@telefication.com
|
||||
1 2 | TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
||||
app s | FCC ID | |||||
1 2 | Grantee Code |
M82
|
||||
1 2 | Equipment Product Code |
M31S01
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 2 | Name |
L******** H********
|
||||
1 2 | Telephone Number |
886-2******** Extension:
|
||||
1 2 | Fax Number |
886-2********
|
||||
1 2 |
L******@advantech.com.tw
|
|||||
app s | Technical Contact | |||||
n/a | ||||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 2 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 2 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 2 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 2 | Equipment Class | NII - Unlicensed National Information Infrastructure TX | ||||
1 2 | DTS - Digital Transmission System | |||||
1 2 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Industrial Tablet PC | ||||
1 2 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 2 | Modular Equipment Type | Does not apply | ||||
1 2 | Purpose / Application is for | Original Equipment | ||||
1 2 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | Yes | ||||
1 2 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 2 | Grant Comments | Power output listed is conducted. The SAR data in this filing is applicable to demonstrate compliance for body-worn operating conditions and is limited to the specific configuration tested for this filing. End-users must be informed of the body worn requirements to satisfy RF exposure compliance. The device must not be co-located or operating in conjunction with any other antenna or transmitter. Maximum reported SAR value: 0.987W/kg (body 5 GHz). | ||||
1 2 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 2 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 2 | Firm Name |
Cerpass Technology Corporation
|
||||
1 2 | Name |
A**** C********
|
||||
1 2 | Telephone Number |
886-2******** Extension:
|
||||
1 2 | Fax Number |
886-2********
|
||||
1 2 |
a******@ecc.com.tw
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15E | CC | 5150.00000000 | 5250.00000000 | 0.0210000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
2 | 1 | 15C | CC | 2402 | 2480 | 0.001 | |||||||||||||||||||||||||||||||||||
2 | 2 | 15C | CC | 2412 | 2462 | 0.064 | |||||||||||||||||||||||||||||||||||
2 | 3 | 15C | CC | 5745 | 5825 | 0.022 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC