Tablet PC
AIM-75S-6 ; AIM-75H-6
Series Startup Manual
AIM-75S-6 ; AIM-75H-6 Appearance
Description of Parts
Left: Front View
Right: Rear View
For more information on this and other Advantech
products, please visit our website at:
http://www.advantech.com
For technical support and service, please visit our
support website at:
http://support.advantech.com
This manual is for AIM-75S-6 ; AIM-75H-6 Series
Print in China
1st Edition
Sep 2020
A: Front Camera
B: Power LED
C: Light Sensor
D: Speaker
E: micro-SIM & micro-SD Card Door
F: Programmable Key
G: Pogo Pin
H: USB Type-C Door
I: Power Button
J: Volume Key (Up/Down)
K: Audio Jack (Headset Combo)
L: Extension Module
M: NFC
M: Rear Camera with LED Flash
O: Battery Cover
Easy Setup
Safety Instructions
Power On Computer
1.
2.
3.
4.
5.
6.
Model: AIM-75S-6 ; AIM-75H-6 Rating 5/9/12 Vdc / 3.0A
This product is intended to be supplied by a UL Listed
Power Adapter( FSP : FSP045-A1BR、GlobTek, Inc :
GTM96605-GEN2-A1-T2 、DELTA : MEA-045AA2C),
rated 5/9/12 Vdc, 3A min. for model AIM-75S-6 ;
AIM-75H-6, and Tma 50 degree C. Please contact
Advantech
assistance.
information and
further
for
The product is equipped with shipping mode for battery
protected and power saving, please charge the
embedded battery of the computer: Connect the Micro
USB adaptor on the AIM-75S-6 ; AIM-75H-6 ()
computer. (“H” on the description of parts.) Please
charge for at least one hour when you use this
computer for the first time.
While the computer is running, push the power button
for 1 second will disable LCD backlight for power saving.
Push the power button again will enable the backlight
again; press the power button for 10 seconds while
computer
is running, the system will be forced
shutdown
Environment:
◼ Operating Temperature(Charging): 0°C ~+40 °C
◼ Operating Temperature (Discharging):
-10°C ~+50 °C
◼ Storage: -20°C ~ +60°C
Please read these safety instructions carefully and follow
these instructions for use. Repair of the device may only be
carried by trained service personnel. Advantech recommends
that a service contact be obtained with Advantech service and
that all repairs also be carried out by them; otherwise the
correct functioning of the device may be compromised.
WARNING! Because of the danger of electrical shock, never
remove the cover of a device while it is in
operation or connected to a power outlet.
If one of the following situations arises, have the equipment
checked by service personnel:
• The power cord or plug is damaged.
• Liquid has penetrated the equipment.
• The equipment has been exposed to moisture.
• The equipment does not work well, or you cannot get it to
work according to the user’s manual.
• The equipment has been dropped and damaged.
• The equipment has obvious signs of breakage. Disconnect
this equipment from any AC outlet before cleaning. Use a
damp cloth. Do not use liquid or spray detergents for
cleaning and keep this equipment away from humidity.
the device, do not allow fluids to come in contact
with the device. If fluids are accidentally spilled
on the equipment, remove the affected unit
from service as soon as possible and contact
service personnel to verify that patient safety is
not compromised.
Push the Power button (“J” on description of parts.) for
3~4 seconds to start the computer.
CAUTION! To avoid short-circuits and otherwise damaging
Battery Caution
CAUTION!
Danger of explosion if battery is incorrectly replaced. Replace
only with the same type recommended by the manufacturer,
discard used batteries according to the manufacturer's
instructions.
Attention : Danger d'explosion si la batterie est inexactement
remplacée. Remplacez seulement avec la même chose ou le
type recommandé par le fabricant, jettent les batteries
utilisées instructions de s selon fabricant des'.
Mistreat the battery used in this device may present a risk of
fire or chemical burn.
Do not attempt to disassemble the computer or its
accessories.
Only qualified personal is allowed to replace the battery.
Do not dispose batteries in a fire and check with local
authorities for disposal instructions.
can only be equipped with standard battery pack with
Getac, AIM-BAT-8, 4900mAH Polymer Lithium Ion Battery.
Use of another battery may present a risk of fire or explosion.
Battery Charge Notice
It is important to consider the environment temperature
whenever you are charging the Lithium-Ion battery pack. The
process is more efficient at normal room temperature or
slightly cooler. It is essential that you charge batteries within
the stated range of 0°C to 40°C. Charging batteries outside of
the specified range could damage the batteries and shorten
their charging life cycle.
Storage and Safety Notice
Although charge Lithium-Ion batteries may be left unused for
several months, their capacity may be
depleted due to the buildup of internal resistance. If this
happens they will require recharging prior to use. Lithium
Ion batteries may be stored at temperatures between
-20°C to 60°C, however they may be depleted more
rapidly at the high end of this range. It is recommended to
store within normal room temperature ranges.
Declaration of Conformity
CE Conformity Statement
Radio products with the CE alert marking comply with the
R&TTE Directive (1999/5/EC) issued by the Commission of the
European Community. Compliance with this directive implies
conformity to the following European Norms (in brackets are
the equivalent international standards).
• EN 60950-1 (IEC60950-1) - Product Safety
• EN 300 328 Technical requirement for radio equipment
• ET S301 489 General EMC requirements for radio
equipment
Products that contain the radio transmitter are labeled with
CE alert marking and may also carry the CE logo.
FCC Compliance Statement
This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio
communications. However, there
is no guarantee that
interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct
the interference by one of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and
receiver.
• Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician
for help.
To assure continued compliance, any changes or modifications
not expressly approved by the party responsible
for
compliance could void the user's authority to operate this
equipment. (Example: use only shielded interface cables when
connecting to computer or peripheral devices).
This device complies with Part 15 of the FCC Rules. Operation
is subject to the following two conditions:
1)
2)
This device may not cause harmful interference, and
This device must accept any interference received,
including interference that may cause undesired
operation.
15.21
Any changes or modifications not expressly approved by the
party responsible for compliance could void the authority to
operate equipment.
This device and its antenna must not be co-located or
operating in conjunction with any other antenna or
transmitter.
End-users and installers must be provided with antenna
installation instructions and transmitter operating conditions
for satisfying RF exposure compliance.
For product available in the USA/Canada market, only
channel 1~11 can be operated. Selection of other channels is
not possible.
FCC Radiation Exposure Statement
This equipment complies with FCC RF radiation exposure
limits set forth for an uncontrolled environment for body-
worn configuration in direct contact to the phantom.
This device complies with FCC radiation exposure limits set
forth for an uncontrolled environment.
This equipment complies with FCC radiation exposure limits
set forth for an uncontrolled environment. End user must
follow the specific operating instructions for satisfying RF
exposure compliance. This transmitter must not be co-
located or operating in conjunction with any other antenna or
transmitter.
The portable device is designed to meet the requirements for
exposure to radio waves established by the Federal
Communications
Commission (USA). These requirements set a SAR limit of 1.6
W/kg
averaged over one gram of tissue. The highest SAR value
reported under
this standard during product certification for use when
properly worn on the body
The grantee is responsible for ensuring that the EUT meets
Section 15.407(g) requirements.
IC warning statement
This device complies with Industry Canada’s licence-exempt
RSSs. Operation is subject to the following two conditions:
(1) This device may not cause interference; and (2) This
device must accept any interference, including interference
that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada
applicables aux appareils radio exempts de licence.
L'exploitation est autorisée aux deux conditions suivantes : (1)
l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur
de l'appareil doit accepter tout brouillage radioélectrique
subi, même si le brouillage est susceptible d'en compromettre
le fonctionnement.
This radio transmitter has been approved by Industry Canada
to operate with the
antenna types listed below with the maximum permissible
gain and required
antenna impedance are strictly prohibited for use with this
device.
Le present emetteur radio a ete approuve par Industrie
Canada pour fonctionner
avec les types d'antenne enumeres ci-dessous et ayant un
gain admissible maximal
et l'impedance requise pour chaque type d'antenne. Les types
d'antenne non inclus
dans cette liste, ou dont le gain est superieur au gain maximal
indique, sont
strictement interdits pour l'exploitation de l'emetteur.
(i)the device for operation in the band 5150–5250 MHz is only
for indoor use to reduce the potential for harmful
interference to co-channel mobile satellite systems; (For
devices installed in vehicles point i. is not required.)
Users should also be advised that high-power radars are
allocated as primary users (i.e. priority users) of the bands
5250-5350 MHz and 5650-5850 MHz and that these radars
pollution."
In 2005, Congress enacted the Energy Policy Act. Section 131
of the Act amends Section 324 (42 USC 6294) of the Energy
Policy and Conservation Act, and "established at the
Department of Energy and the Environmental Protection
Agency a voluntary program to identify and promote energy–
efficient products and buildings in order to reduce energy
consumption, improve energy security, and reduce pollution
through voluntary labeling of or other forms of
communication about products and buildings that meet the
highest energy efficiency standards."
For more information, please visit www.energystar.gov
could cause interference and/or damage to LE-LAN devices.
(i) l'appareil pour fonctionner dans la bande 5150-5250 MHz
est réservé à une utilisation en intérieur afin de réduire les
risques d'interférences nuisibles à la co-canal systèmes
mobiles par satellite;
Devraient également être informés les utilisateurs que les
radars à haute puissance sont désignés comme utilisateurs
principaux (c.-à-utilisateurs prioritaires) des bandes 5250-
5350 MHz et 5650-5850 MHz et que ces radars pourraient
provoquer des interférences et / ou endommager les
appareils LE-LAN.
IC Radiation Exposure Statement
This EUT is compliance with SAR for general
population/uncontrolled exposure limits in IC RSS-102. This
equipment should be installed and operated with minimum
distance 0 cm between the radiator & your body.
Cet EUT est la conformite avec SAR pour la population
generale / les limites d'exposition incontrolees dans IC RSS-
102. Cet equipement doit etre installe et utilise a une
distance minimale de 0 cm entre le radiateur et votre corps.
This equipment complies with ISED radiation exposure limits
set forth for an uncontrolled environment. End user must
follow the specific operating instructions for satisfying RF
exposure compliance. This transmitter must not be co-
located or operating in conjunction with any other antenna or
transmitter.
The portable device is designed to meet the requirements for
exposure to radio waves established by the ISED. These
requirements set a SAR limit of 1.6 W/kg averaged over one
gram of tissue. The highest SAR value reported under this
standard during product certification for use when properly
worn on the body.
Cet équipement est conforme aux limites d’exposition aux
rayonnements ISED établies pour un environnement non
contrôlé. L’utilisateur final doit suivre les instructions
spécifiques pour satisfaire les normes. Cet émetteur ne doit
pas être co-implanté ou fonctionner en conjonction avec
toute autre antenne ou transmetteur.
5.4
An ENERGY STAR qualified computer delivers substantial
savings over a conventional computer. Desktop, integrated
desktop, and notebook (laptop) computers, workstations,
small-scale servers, and thin clients are all eligible to earn the
ENERGY STAR, and those that do are now more efficient than
ever.
It is an honor for Advantech to provide you such products.
What is ENERGY STAR?
ENERGY STAR is a U.S. Environmental Protection Agency
(EPA) voluntary program that helps businesses and
individuals save money and protect our climate through
superior energy efficiency.
The ENERGY STAR program was established by EPA in 1992,
under the authority of the Clean Air Act Section 103(g).
Section103(g) of the Clean Air Act directs the Administrator
to "conduct a basic engineering research and technology
program to develop, evaluate, and demonstrate non–
regulatory strategies and technologies for reducing air
ENERGY STAR