FCC ID: M82-WISE-3200 WIFI Module

Model: WISE-3200 WIFI module USER manual Federal Communication Commission Interference Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. antenna or transmitter. This transmitter must not be co-located or operating in conjunction with any other Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. This module is intended for OEM integrators only. Per FCC KDB 996369 D03 OEM Manual v01 guidance, the following conditions must be strictly followed when using this certified module:

KDB 996369 D03 OEM Manual v01 rule sections:

2.2 List of applicable FCC rules This module has been tested for compliance to FCC Part 15C 2.3 Summarize the specific operational use conditions The module is tested for standalone mobile RF exposure use condition. Any other usage conditions such as co-location with other transmitter(s) or being used in a portable condition will need a separate reassessment through a class II permissive change application or new certification. 2.4 Limited module procedures Not applicable. 2.5 Trace antenna designs Not applicable. 2.6 RF exposure considerations rules. 2.7 Antennas This equipment complies with FCC mobile radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body. If the module is installed in a portable host, a separate SAR evaluation is required to confirm compliance with relevant FCC portable RF exposure The following antennas have been certified for use with this module; antennas of the same type with equal or lower gain may also be used with this module. The antenna must be installed such that 20 cm can be maintained between the antenna and users. 2.8 Label and compliance information The final end product must be labeled in a visible area with the following:

Contains FCC ID: M82-WISE-3200. The grantee's FCC ID can be used only when all FCC compliance requirements are met. 2.9 Information on test modes and additional testing requirements This transmitter is tested in a standalone mobile RF exposure condition and any co-located or simultaneous transmission with other transmitter(s) or portable use will require a separate class II permissive change re-evaluation or new certification. 2.10 Additional testing, Part 15 Subpart B disclaimer This transmitter module is tested as a subsystem and its certification does not cover the FCC Part 15 Subpart B (unintentional radiator) rule requirement applicable to the final host. The final host will still need to be reassessed for compliance to this portion of rule requirements if applicable. As long as all conditions above are met, further transmitter test will not be required. However, the OEM integrator is still responsible for testing their end- product for any additional compliance requirements required with this module installed. IMPORTANT NOTE: In the event that these conditions can not be met (for example certain laptop configurations or co-location with another transmitter), then the FCC authorization is no longer considered valid and the FCC ID can not be used on the final product. In these circumstances, the OEM integrator will be responsible for re-evaluating the end product (including the transmitter) and obtaining a separate FCC authorization. Manual Information To the End User The OEM integrator has to be aware not to provide information to the end user regarding how to install or remove this RF module in the users manual of the end product which integrates this module. The end user manual shall include all required regulatory information/warning as show in this manual. OEM/Host manufacturer responsibilities OEM/Host manufacturers are ultimately responsible for the compliance of the Host and Module. The final product must be reassessed against all the essential requirements of the FCC rule such as FCC Part 15 Subpart B before it can be placed on the US market. This includes reassessing the transmitter module for compliance with the Radio and EMF essential requirements of the FCC rules. This module must not be incorporated into any other device or system without retesting for compliance as multi-radio and combined equipment. Block Diagram

18 mm

) Model : WISE-3200 WIFI Module FCC ID: M82-WISE-3200 m m 2 1 R=1mm

) Model : WISE-3200 WIFI Module FCC ID: M82-WISE-3200 300%

#5 0

18X12mm,R1*4;

%&()3;

0 2mm

. Provisional 2020/11/02 Ver.1 Lily.liu #8962 Board Label 18x12mm WISE-3200 Series A1 Lily.Liu Lily.Liu Lily.Liu Jing.ma 2020/11/02 2020/11/02 2020/11/02 2020/11/02 WISE-3200 Series

2000032165

RAAT PN SVL 4 eo L HPD CRS 2688205518 Date: No.1, Alley 20, Lane 26, Rueiguang Road Neihu District, Taipei 114, Taiwan Tel:886-2-2792-7818 Fax:886-2-2794-7334 2020-10-14 www.advantech.com FCC ID: M82-WISE-3200 To the attention of Federal Communications Commission Authorization and Evaluation Division Permanent Confidentiality Request Pursuant to Sections 0.457 and 0.459 of the Commissions Rules, the Applicant hereby requests confidential treatment of information accompanying this Application as outlined below:

Schematics Block Diagram Operational Description The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rule 0.457, disclosure of this Application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely yours, Lily Huang / Corporate Quality/Assistant Manager Advantech @o Ltd Tel: 02-2792-7818 Fax: 02-2794-7334 E-mail:Lily.nuang@advantech.com.tw

TER ARA a AD NTECH Zui ae Sa 26 20 1 9E No.1, Alley 20, Lane 26, Rueiguang Road Neihu District, Taipei 114, Taiwan Tel:886-2-2792-7818 Fax:886-2-2794-7334 www.advantech.com Date: October 14, 2020 We, Advantech Co Ltd declare that the device does not support channel 12 ~ 13 in 2.4GHz band and any non-US channels in all the operational mode(s) for the following product. FCC ID: M82-WISE-3200 If you should have any question(s) regarding this declaration, please dont hesitate to contact us. Thank you!

Lily Huang /|Corporate Quality/Assistant Manager Advantech Co Ltd Tel: 02-2792-781 Fax: 02-2794-7334 E-mail:Lily.huang@advantech.com.tw

ADVANTECH CO., LTD Request for Single Modular Transmitter Approval FCC ID :M82-WISE-3200 Applicant: ADVANTECH CO., LTD This transmitter, model: WISE-3200 is designed by us. It complies with the modular transmitters basic requirements (Item 1 to 8) in FCC Part 15 Subpart C Section 15.212 as indicated below:

Modular Approval Checklist:

February 20, 2021 Modular approval requirement Yes No

(1) Have its own RF shielding. Xx Ww Refer to the photo file.

(2) Have buffered modulation/data inputs. Xl

(3) Have its own power supply regulation. xX

(4) Comply with the antenna and transmission system requirements of 15.203, 15.204(b) and 15.204(c). ps Refer to the photo file.

(5) Tested in a stand-alone configuration. Unless the transmitter module will be battery powered, it must comply with the AC line conducted requirements found in FCC 15.207. AC or DC power lines and data input/output lines connected to the module must not contain ferrites, unless they will be marketed with the module. The length of these lines shall be the length typical of actual use or, if that length is unknown, at least 10 centimeters to insure that there is no coupling between the case of the module and supporting equipment. Any accessories, peripherals, or support equipment connected to the module during testing shall be unmodified and commercially available. xX

(6) Equipped with either a permanently affixed label or must be capable of electronically displaying its FCC ID:

If the FCC ID is not visible when the module is installed inside another device, then the outside of the device into which the module is installed must also display a label referring to the enclosed module. X Refer to the label drawing

(7) Comply with any specific rules or operating requirements that ordinarily apply to a complete transmitter and the manufacturer must provide adequate instructions along with the module to explain any such requirements. X Refer to Appendix User manual.

(8) Comply with any applicable RF exposure requirements in its final configuration: The modular transmitter complies with FCC radiation exposure requirement. xX Refer to Appendix User manual.

[signature]

ADVANTECH CO., LTD 2/-2-370 Lily Huang Manager

TERA A]

AD\ANTECH [ipeeeieiers BIlTi ABER ICES 26 2 20 FF 1 HE No.1, Alley 20, Lane 26, Rueiguang Road Neihu District, Taipei 114, Taiwan Tel:886-2-2792-7818 Fax:886-2-2794-7334 www.advantech.com Date: 2020-10-14 FCC ID: M82-WISE-3200 AUTHORIZATION LETTER To Whom It May Concern:

Advantech Co., Ltd. hereby authorizes Andrea Hsia / Supervisor of Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch (BV CPS Taoyuan), to act on its behalf in all matters relating to the Federal Communication Commission (FCC) application for equipment authorization in connection with the FCC ID listed above, including signing of all documents relating to these matters. Any and all acts carried out by Andrea Hsia / Supervisor of BV CPS Taoyuan on Advantech Co., Ltd. behalf, within the scope of the powers granted herein, shall have the same effect as acts of its own. If you have any questions regarding the authorization, please dont hesitate to contact us. Sincerely yours, SPE Bl ae Lily Huang// Corporate Quality/Assistant Manager Advantech Co Ltd Tel: 02-2792-7818 Fax: 02-2794-7334 E-mail: lily.huang@advantech.com.tw