all | frequencies |
|
exhibits | applications |
---|---|---|---|---|
manual |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 2 3 |
|
Users Manual | Users Manual | 3.87 MiB | ||||
1 2 3 | Cover Letter(s) | |||||||
1 2 3 | External Photos | |||||||
1 2 3 | ID Label/Location Info | |||||||
1 2 3 | Internal Photos | |||||||
1 2 3 | Cover Letter(s) | |||||||
1 2 3 | RF Exposure Info | |||||||
1 2 3 | Test Setup Photos | |||||||
1 2 3 | Test Report |
1 2 3 | Users Manual | Users Manual | 3.87 MiB |
VPR48GUserManual
1
Content
1Welcome...................................................................................6
2ProductOverview......................................................................8
2.1Instruction........................................................................................................8
2.2TechnicalSpecification.....................................................................................9
2.3EquipmentAppearanceAndInterfaceDescription.......................................10
2.3.1InterfaceDescription...........................................................................11
2.3.2KeypadDescription.............................................................................11
2.4Indicators........................................................................................................12
3Installation..............................................................................13
3.1EquipmentPackaging.....................................................................................13
3.2ConnectingVideoPhone...............................................................................13
3.3InstallationConsiderations............................................................................14
4GettingStarted........................................................................15
4.1BasicOperation..............................................................................................15
4.1.1MainScreenInstruction......................................................................15
4.1.2StatusAndNotificationsInstruction...................................................15
4.1.3UsingTheTouchscreen.......................................................................16
4.1.4StartupAndShutdown........................................................................17
4.1.5View/TurnOffNotifications..............................................................17
4.2ConnectingToNetworkAndWiFi................................................................18
4.2.1ConfiguringStaticIP............................................................................18
4.2.2ConfiguringDHCP................................................................................20
4.2.3ConfiguringWiFi................................................................................21
4.3SIPAccountConfiguration..............................................................................24
4.3.1AddAccount........................................................................................25
4.3.2SIPAccountON/OFF...........................................................................27
4.3.3Modify/RemoveSIPAccount..............................................................27
4.4Sound¬ification......................................................................................28
4.4.1Volumes...............................................................................................29
4.4.2Interruptions.......................................................................................30
4.4.3Phoneringtone...................................................................................31
4.4.4Defaultnotificationringtone...............................................................32
4.4.5OtherSounds......................................................................................32
4.5AudioSettings................................................................................................32
4.6VideoSettings................................................................................................33
4.7CallSettings....................................................................................................35
4.7.1Alwaysforwarding&ForwardingNumber.........................................35
4.7.2Callforwardingbusy&ForwardingNumber......................................36
4.7.3NoAnswerForwarding&ForwardingNumber..................................36
4.7.4Timeout..............................................................................................36
4.7.5DoNotDisturb....................................................................................37
4.7.6CallWaiting.........................................................................................37
4.7.7Playtone..............................................................................................37
4.7.8Intercom..............................................................................................37
4.7.9Hotline.................................................................................................38
4.8DialPlan.........................................................................................................38
4.9AutoProvision................................................................................................39
4.10Personalize...................................................................................................40
4.10.1LogLevel............................................................................................40
4.10.2HookMode.......................................................................................40
4.11RebootManager..........................................................................................40
4.11.1Reboottime......................................................................................40
4.11.2Statusoftime....................................................................................41
4.11.3Statusofactive..................................................................................41
4.11.4Rebootsettings.................................................................................41
4.12Date&Time.................................................................................................41
4.13PersonalizationSettings...............................................................................44
4.13.1Wallpaper..........................................................................................44
4.13.2Widgets.............................................................................................44
4.13.3Shortcuts...........................................................................................46
4.13.4ModifyExtendedBar........................................................................47
4.13.5Ringtone............................................................................................47
4.14Backup&Reset............................................................................................48
5Function..................................................................................49
5.1CallFunction...................................................................................................49
5.1.1MakeACall.........................................................................................49
5.1.2DialingOutFromContactList.............................................................50
5.1.3ReceiveACall......................................................................................52
5.1.4CallOptions.........................................................................................53
5.1.5CallRecords.........................................................................................56
5.2Contacts.........................................................................................................59
5.2.1LocalPhoneBook................................................................................60
5.2.2BroadsoftPhoneBook........................................................................61
5.2.3RemotePhoneBook...........................................................................62
5.2.4LDAP....................................................................................................62
5.2.5Group..................................................................................................62
5.3BLF..................................................................................................................63
5.4Intercom.........................................................................................................65
5.5CallReturn......................................................................................................66
5.6BLFList............................................................................................................67
5.7Pickup&GroupPickup...................................................................................67
5.8ACD.................................................................................................................68
5.9HotDesking....................................................................................................69
5.10Conference...................................................................................................70
5.10.1Create3wayconference..................................................................70
5.11Transfer........................................................................................................72
5.11.1BlindTransfer....................................................................................72
5.11.2AttendedTransfer.............................................................................73
5.12KeypadInput................................................................................................74
5.13WebpageBrowser........................................................................................74
5.13.1OpenTheWebpage..........................................................................75
5.14Camera.........................................................................................................76
5.14.1PhotographMode.............................................................................76
5.15Gallery..........................................................................................................78
5.15.1ViewPhoto&Picture&Video.........................................................78
5.16Bluetooth.....................................................................................................79
5.16.1TurningBluetoothOn/Off................................................................80
5.16.2ChangingBluetoothDeviceName....................................................80
5.16.3ParingVPR48GWithABluetoothDevice........................................80
5.16.4UnpairingABluetoothDevice.........................................................81
5.17USB...............................................................................................................81
5.18Calendar.......................................................................................................82
5.18.1AddAnAccount.................................................................................83
5.18.2ViewCalendar...................................................................................83
5.18.3NewActivities...................................................................................83
5.18.4EditActivities.....................................................................................84
5.18.5DeleteActivities................................................................................84
5.19Clock.............................................................................................................84
5.19.1Alarm.................................................................................................85
5.19.2CountdownTimer.............................................................................87
5.19.3Stopwatch.........................................................................................88
5.20Gmail............................................................................................................89
5.20.1AddANewGmailAccount................................................................89
5.21Music............................................................................................................90
5.22Explorer........................................................................................................91
5.23VideoPlayer.................................................................................................92
5.23 Others.......................................................................................................94
5.23.1ApkInstall..........................................................................................94
6SoftwareUpgrade...................................................................95
6.1ImmediateUpdate.........................................................................................95
6.1.1SelectOtherUpgradePackage............................................................96
6.1.2LocalUpdate.......................................................................................96
6.1.3RemoteUpdate...................................................................................97
6.2AutoUpdatePeriod.......................................................................................98
6.3Upgradeontheweb......................................................................................99
6.4CheckUpdateAfterSystemPowerOn...........................................................99
7SystemMaintenance.............................................................101
7.1SystemStateInspection...............................................................................101
7.2IPQuery........................................................................................................101
7.3SIPAccountRegistrationQuery...................................................................102
7.4Backup&Reset............................................................................................103
7.5FailureProcess.............................................................................................103
8WebInterface........................................................................105
8.1Weblogin.....................................................................................................105
8.2Status>Basic................................................................................................105
8.3Account>Basic.............................................................................................107
8.4Account>Advanced.....................................................................................109
8.5Network>Advanced....................................................................................114
8.6Phone>Time................................................................................................115
8.7Phone>Preference......................................................................................115
8.8Phone>CallFeature....................................................................................116
8.9Phone>Audio..............................................................................................121
8.10Phone>Video............................................................................................123
8.11Phone>ExtKey..........................................................................................124
8.12Phone>Tone.............................................................................................125
8.13Phone>ReplaceRule.................................................................................126
8.14Phone>DialPlan........................................................................................127
8.15Phone>ActionURL....................................................................................129
8.16Phone>Multicast.......................................................................................131
8.17PhoneBook>LocalBook............................................................................132
8.18PhoneBook>RemoteBook........................................................................134
8.19PhoneBook>CallLog.................................................................................135
8.20PhoneBook>LDAP.....................................................................................136
8.21PhoneBook>Broadsoft..............................................................................137
8.22Upgrade>Basic..........................................................................................138
8.23Upgrade>Advanced...................................................................................138
8.24Security>Basic...........................................................................................141
8.25Security>Advanced...................................................................................142
1 Welcome Thank you for purchasing Akuvox VP-R48G Multimedia VoIP Phone. The VP-R48G is an innovative smart desk phone loaded with tremendous value for business communications as well as unprecedented power for advanced custom business applications development and personalization. Featuring Android 5.1 system, a 7 inch capacitive touch screen TFT LCD, a 1.3M CMOS sensor camera, Bluetooth, integrated PoE and Wireless, VP-R48G provides excellent user experiences such as high quality video phone, smooth internet surfing, various 3rd party applications and daily information. Built with advanced security protection for privacy, this Multimedia VoIP Phone also features broad interoperability with most 3rd party SIP based devices, IPPBX and major IMS platforms. The VP-R48G represents the future multimedia terminal in modern Internet age. This user manual is designed to help you understand how to configure and manage the VP-R48G Multimedia VoIP Phone. Besides demonstrating how to install this unit with ease, this manual will explain how to fully utilize the phones voice calling features as well as explore all the built-in feature-rich applications. Any Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful 6 interferencetoradiocommunications.However,thereisnoguaranteethatinterference
will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the
equipmentoffandon,theuserisencouragedtotrytocorrecttheinterferencebyoneor
more of the following measures: Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver. Connect the
equipment into an outlet on a circuit different from that to which the receiver is
connected.Consultthedealeroranexperiencedradio/TVtechnicianforhelp.
FCCRadiationExposureStatement:
ThisequipmentcomplieswithFCCradiationexposurelimitssetforthforanuncontrolled
environment.
This transmitter must not be colocated or operating in conjunction with any other
antennaortransmitter.
This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
7
2 ProductOverview
2.1 Instruction
VPR48GisanAndroidbasedmultimediaterminalwitha7inchtouchscreenanda
1.3MCMOSsensorcamera.ItsupportsH.264/H.263codecswithadaptivebandwidth
adjustment.The7inchtouchscreenoffersexcellentuserexperiencessuchashigh
quality videophone, smooth internet surfing, various Android Apps and daily
information.
VPR48G provides 2 Ethernet ports, 1USB, 1HDMI, and one 3.5mm headset/audio
port.
8
2.2 TechnicalSpecification
Model
GraphicDisplay
VPR48G
z 7inchcapacitivetouchscreenTFTLCD,1024x600pixels,16:9wide
screenaspectratio
Camera
z 1.3megapixelsCMOScamera,freerotation
NetworkProtocol z SIPRFC3261,TCP/UDP/IP,PPPOE,RTP/RTCP
OperationSystem z Android5.1
VoiceCodec
VideoCodec
DTMFModes
AudioFeatures
VideoFeatures
Others
NetworkInterface
WiFi
Expansion
Interface
IPassignment
Management
Dimension
z G.711A/U,G.729,G.722
z AMRNB,AMRWB,OPUS
z H.263,H.264
z Inband,RFC2833,SIPINFO
z VAD,CNG,EchoCancellerG.165/G.168
z QCIF,CIF,4CIF,VGA,720P
z Videobitrate:64kbps~2Mbps
z PIP
z FullScreen
z localvideoON/OFFcontrol
z ImageCodecJPEG,GIF,PNG,BMP
z Downloadcontentfromthespecifiedserver
z Informationreceiving,storing,andrenderingcapabilities
z Webbrowser
z ContactsandCallrecordsmanagement
z Supportplayinglocaloronlinevideo
z Dualswitched10/100/1000Mbpsport,supportingIEEE802.az
EnergyEfficientEthernet;optionalPoE
z IEEE802.11b/g/n
z USB2.0,3.5mmheadsetjack,HDMI
z StaticIP,DHCP,PPPoE
z LCDMenuConfiguration,TR069,WebUI
z 240192106mm
9 2.3 EquipmentAppearanceAndInterfaceDescription
Figure11R48GFrontView
Figure12R48GRearView
10 USB HDMI Headset Figure13R48GProfileView
2.3.1 InterfaceDescription
Interface
Camera
USBinterface
Headset
HDMI
LAN
PC
Description
Adjustablecamerashootingangle,rotatedownthecamerato"off"
angle.
ExternalUSBstoragedevice
Connectto3.5mmstereoheadphone,headsetdevice
UseHDMIcabletooutputthevideotoaTVscreen
Networkinterfacecanbeconnectedtoahub,switchorothernetwork
accessdevices.ItalsosupportsPOE(PoweroverEthernet).
SharethenetworkaccessfromLANport,andforPCandother
equipmentconnection
Connectto12Vadapter,Powersupply
Connecttohandset
LockthevideophonewithaLaptoplock
Power
Handset
Lock
Note:IfPoweroverEthernetisbeingused,donotplugintheACadapter.
2.3.2 KeypadDescription
Interface
Power
Suspend
Description
Turnon/offtheLCD,Reboot,Silentmode
Turnon/offtheLCD,Reboot,Silentmode
11 Volume
Press+orforthephonevolumeadjustment
StandardKeypad
Inputthenumberorsymbol
Delete
Deleteacharacterbeforethecursor
OK
Samefunctionwithsoftkeyboard"Enter"key
Message
Optional
Contact
EnterIntothecontactslist,youcanviewthelocalcontact
Conference Thefirstpartyisheldinthecase,accordingtoa
conferencekey,thefirstpartycanbecombinedtoachieve
atripartitemeeting
Toholdacallduringthecall
Hold
Transfer
Totransferthecurrentcalltothethirdparty
Mute
Theotherpartycannotheardthevoiceduringthecall
Returntothemainscreen,andlongpress,itwilldisplay
recentlyusedapplications
TocalluptheSystemorprogramsetupmenu
Returntothepreviousmenu
FunctionKey
Home
Menu
Back
Speaker
Speaker
2.4 Indicators
IndicatorName
Icon
Status
Description
Power
NetworkConnection Information
ON
OFF
ON
OFF
Systemisunderworking
Systemisnotworking
NetworkLANPortisconnected
NetworkLANPortisdisconnected
Flashing
ContainsMissCallsorUnreadMessage
OFF
Normalstatus
12 3 Installation
3.1 EquipmentPackaging
Name
MainCase
Handset
PhoneCord
PowerAdapter
EthernetCable
QuickStartGuide
Quantity
1
1
1
1
1
1
3.2 ConnectingVideoPhone
z Connectiondiagram
13
z ConnectingtoNetwork
UsethematchednetworkcabletoconnecttheLANPortofthevideophonetothe
RouterorSwitch.Viewingthetoprightcornerofthescreen,iftheindicatorlight
ison,networkcableisconnectedproperly.
z ConnectingtoPC
UsethematchednetworkcabletoconnectthePCPortofthevideophonetothePC.
ThePCcanaccesstotheinternetnetworkviaPCPortofthevideophone.
3.3 InstallationConsiderations
Thisproductisadesktopproduct,andherearesomesafetyrecommendationsabout
theinstallationandtheusage:
z Donotusethisproductnearwater,suchas:bath,washbasin,kitchensinkand
otherdampplacesandsoon;
z Placethedeviceinaplaceawayfromheat;
z Placethedeviceawayfromtrafficareastopreventcollisions;
z PleaseusetheequipmentwiththematchingpoweradapterorPOE;
14 4 GettingStarted
4.1 BasicOperation
4.1.1 MainScreenInstruction
z Status bar, at the top of the screen, displaying the status of system
information.
z Shortcuts, at the bottom of the screen, user can drag a shortcut to this
region to achieve the replacement of the shortcut. Supports max four
shortcuts.
4.1.2 StatusAndNotificationsInstruction
Thestatusbarinmainscreenisdividedintotwozones,notificationareaandstatus
area,asshownbelow:
15
StatusArea
Icon
Description
Networkisconnected
Slidemode(Soundisoff)
Alarmclockisset
Bluetoothisopened
NotificationArea
Icon
Description
SIPaccountisunregistered
SIPaccountisregistered
Missedcall
uploading
4.1.3 UsingTheTouchscreen
z Tap
To select items on the screen (e.g., setting options, apps); to press onscreen
buttons;totypelettersandsymbolsusingtheonscreenkeyboard.
z TouchandHold
Touch the item on the screen and hold it without lifting your finger from the
screentillanactionoccurs.
Forexample,touchandholdonapicturetobringupoperationoptions.
z Drag
Touchandholdanitemforafewsecondsfirst.Oncetheitemhasaredframe
activated,oramoveoptionshowsup,keepyourfingeronthescreenandmove
ituntilthetargetpositionisreached.Thenliftyourfingeruptorelease.
16 z Slide
Moveyourfingerfastacrossthescreentoslide.Toviewdifferentidlescreensor
menupages,slideleftorright;toviewthestatusbarontopofthescreen,place
yourfingeronthebarandslideitdown.Ifyourfingerstaysonthescreenfortoo
long,theitemmaybeselectedandslidingwontoccur.
z Doubleclick
Click on the screen twice in quick succession, for example, when user surfs in
browser,youcanquicklyclicktwiceonthepage,thepagecanbeenlarged.
z Pinch
Placetwofingersonthescreen,thenpinchthemtogether(zoomout)orspread
themapart(zoomin).Thiscouldbeusedinapicture.
4.1.4 StartupAndShutdown
z Startup
Connecttothepowersupply,thesystemautomaticallystartsup.
z Shutdown
If you do not use the device, directly remove the power supply, to save
electricity.
z Reboot
Ifyouneedtorestartthedevice,accordingtothefollowingsteps:
1)Pressandholdthe"Power"buttonuntilthepopup"Options"menu.
2)Clickthe"Reboot"
4.1.5 View/TurnOffNotifications
z Toviewnotifications,dragdownthestatusbar,thenclicktheeachnotification
bartoviewthedetailnotification.
z Touch and hold one of notifications bar until the icon
appear, tap the
icon
toentertheprioritysettinginterface.
17 z To turn off notifications, simply drag down the middle of the idle screen to
display notifications, click on the icon
to clear up the notice. As shown
below.
4.2 ConnectingToNetworkAndWiFi
VPR48G supports a variety of network connections (Ethernet, Wireless) and the
device Network connections includes three modes, Static IP, DHCP, WiFi access.
DHCPisthedefaultconfiguration.ThedeviceconnectionsincludeEHSheadset,USB
andBluetoothdevice.
4.2.1 ConfiguringStaticIP
You can select one of the following methods to enter the static IP configuration
interface:
z Mode 1: In the main screen, tap icon
> Settings
> Wireless &
Networks>More>Ethernet>EthernetIpmode>checkstatic.
Configurationpageisshownasbelow
18 z Mode 2: In the main screen, tap icon
> Network Settings > LAN
Type>AccessMode>choseStaticIP.
Configurationpageisshownasbelow
Configurationparameterspecification
Parameter
Specification
IPaddress
SubnetMask
settheIPaddressofthedevice
setthesubnetmaskofthedevice
DefaultGateway
setthedefaultgateway
19 DNSServer
settheDNSaddress
AlternativeDNSServer
setthebackupDNSaddress
4.2.2 ConfiguringDHCP
You can select one of the following methods to enter the DHCP configuration
interface:
z Mode 1: In the main screen, tap icon
> Settings
> Wireless &
Networks>More>Ethernet>EthernetIpmode>checkdhcp.
z Mode 2: In the main screen, tap cion
>Network Settings>Network
Management>LANType>AccessMode>choseDHCP.
Configurationpageisshownasbelow
Note:
1) There is a item of Use static DNS at the second bar, when checked, you can
modifytheprimaryDNSaddressandSecondaryDNSaddress.
2) IfDHCPisfailed,theIPaddresswillshowas:0.0.0.0.
20 4.2.3 ConfiguringWiFi
YoucanselectoneofthefollowingmethodstoentertheWiFiconfiguration:
z Mode 1: In the main screen, tap icon
> Settings
> Wireless &
Networks>WiFi.
Configurationpageisshownasbelow
z Mode2:Inthemainscreen,dragdownthemiddleoftheidlescreento display
notifications>tapicon
>tapWiFi.
Configurationpageisshownasbelow
21 1) When the WiFi switch is turned on, the video phone can list and display all
WiFiAPsearchedintheenvironment.
2) When connects to available AP in the environment, if a WiFi AP is without
passwordprotection,thereisnolockicononWiFisignal,itwillautomatically
connectwhenclicked.
3) IfaWiFiAPisencryption,WiFisignalwillbeaddedthelockicon,andwhen
checked, it will pop up a dialog box to enter a password. If the password is
incorrect,theconnectionwillnotbesuccessful.Asshownbelow:
4) checkShowadvancedoptions,draguptothemodifyProxyserverandIPmode.
ProxySettings
22 IPsettings(StaticIP):
5) Tap the connected WiFi AP, it will popup a dialog box, you can forget the
networkormodifythenetwork.TouchandholdonthenonconnectedWiFiAP,
itwillpopupadialogbox,andyoucanclickandconnecttonetwork.
6) ClickMenu,youcandotheoperationssuchas:addnetworksetting,refreshthe
WiFiAPlistandAdvancedsetting.
7) InAdvancedMenu,shownasbelow:
23
a. CheckNetworknotification,itwillnotifyyouwhenanopennetworkisavailable;
b. CheckScanningalwaysavaible,letgoogleslocationserviceandotherappsscan
fornetworks,evenwhenWiFiisoff.
c. ViewtheWiFiMacaddressandIPaddress;
4.3 SIPAccountConfiguration
YoucanselectoneofthefollowingmethodstoentertheSIPaccountconfiguration:
z Mode1:Inthemainscreen,tapicon
>click
-> clickAccountManager.
z Mode 2: In the main screen, tap
> click
> click
->click Account
Manager.
z Mode 3: Directly pick up the handset or press Speaker button
> click
->clickAccountManager.
z Mode4:ClickBrowsericon
,inputIPaddresstoenterlogininterface.Input
usernameandpassword(default:admin;admin),clickLoginlabel.Gotothepath:
Account>Basic.
24 4.3.1 AddAccount
ClickanaccounttoenterAccountEditorinterface.
25
Configurationparametersaredescribedasfollows:
Parameter
RegisterName
UserName
Password
Specification
SIPAccoutIDprovidedbyISP
SIPUserNameprovidedbyISP
SIPPasswordprovidedbyISP
DisplayName
SIPDisplayname
RegServerIP
SIP Register Server, format: domain/IP, for example:
194.168.1.2
RegServerPort
Thedefaultportis5060.
ProxyServerIP
SIP Proxy Server,
194.168.1.2
format: domain/IP,
for example:
ProxyServerPort
Thedefaultportis5060.
BackupProxyIP
SIP Backup Proxy Server, format: domain/IP,for example:
194.168.1.2
BackupProxyPort
Thedefaultportis5060.
Afteralltheparametersareconfigured,Click"save"buttontosavetheconfigurations,
thenthesipaccountisaddedsuccessfully.Thenactivetheaccount.
26 4.3.2 SIPAccountON/OFF
After SIP account is configured and registered successfully, it will display the
prompt Registered in the Account Manager, and the icon
will be displayed
onthestatusbar.
If you want to disable the registered account, tap the icon
to change the
accountstatus,theicon
willbeshownonthestatusbar.
If the sip account is failed to register, the failure code will be displayed under the
account, and then you can check with the account configuration or network
connection.Theicon
willbeshownonthestatusbar.Asshownbelow:
4.3.3 Modify/RemoveSIPAccount
1) Modifythesipaccount:Directlyclicktheaccounttomodify.
27
2) Removethesipaccount:Clicktheboxoftheaccountwhichyouwanttodelete,
thenonthebottomoftheaccountlistwilldisplaythelabelClearAccount,tap
thislabeltoremovetheselectedaccount.
4.4 Sound¬ification
YoucanselectoneofthefollowingmethodstoentertheSoundconfiguration:
z Mode 1: In the main screen, tap shortcut icon
> Device> Sound &
notification.
z Mode 2: In the main screen, click
> Settings
> Device> Sound &
notification.
z Mode 3: Drag down the status bar, click the icon on the status bar >tap
icon
>Device>Sound¬ification.
Configurationpageisshownasbelow
28
IncludingVolume,RingtoneandNotification.
4.4.1 Volumes
InSound¬ificationpage,thevolumeconfigureisshownasbelow
z VolumeoptionsincludeMedia,Alarmclock,Notification.
z Youcandirectlyclickavolumelocationtoadjustthevolume.
z The volume settings,you can also press thekeyboard volume button +
toincrease
or
decrease
the
volume.Usually,volume
button
is
29 toadjustforringtone
or
notification
volume,
but
in
thebroadcastmedia,pressingvolumebuttonistoadjustformediavolume.
4.4.2 Interruptions
In the Sound & notification interface, click the Interruptions bar, enter the
interruptions setting interface. If the user open the Silent mode, can enter the
interruptioninterfacetosetpriorityeventorprioritytimeallowinterrupt.
TouchandholdthePowerbutton,taptheSilentmodebarinthepopupmenuto
changethestatus.Thesilentmodeicon
willbedisplayedontherightsideof
thestatusbar.Asshowninthepicturebelow:
30
4.4.3 Phoneringtone
IntheSound¬ificationinterface,clickthePhoneringtonebartopopupdefault
ringtonesettinginterface.Clicktheringtoneyouwanttoset,aftertheselection,it
willringashorttime.Finally,click"OK".Settinginterfaceshownasbelow:
31 4.4.4 Defaultnotificationringtone
In the Sound & notification interface, click the Default notification ringtone bar to
pop up the phone default notification ringtone setting interface. Clickthe ringtone
youwanttoset,aftertheselection,itwillringashorttime.Finally,click"OK".Setting
interfaceshownasbelow.
4.4.5 OtherSounds
IfyouwanttoenableScreenlookingsoundsandTouchsounds,pleasegotoOther
Soundsconfigurationpagetoclickthecorrespondsound.Screenlockingsoundsand
Touchsoundsareenabledindefaultconfiguration.Shownasbelow.
4.5 AudioSettings
TosetupthecorrespondingaudioparametersandVolume.
32
4.6 VideoSettings
Toconfigurethevideocorrespondingparameters.
33
34 4.7 CallSettings
4.7.1 Alwaysforwarding&ForwardingNumber
Alltheincomingcallswillbeforwardedunconditionallytospecifiednumber.
Configurationonthephone:
35
1. PhoneSettings>CallSettings>CallForwarding>AlwaysForwarding
2. SelectthedesiredaccountontheAccountbar.
3. ChecktoenableAlwaysForwardingfeature.
4. InputtheforwardnumberintotheForwardingNumberbar.
4.7.2 Callforwardingbusy&ForwardingNumber
Theincomingcallswillbeforwardedtospecifiednumberwhenthephoneisbusy.
Configurationonthephone:
1. PhoneSettings>CallSettings>CallForwarding>CallForwardingBusy
2. SelectthedesiredaccountontheAccountbar.
3. ChecktoenableCallForwardingBusyfeature.
4. InputtheforwardnumberintotheForwardingNumberbar.
4.7.3 NoAnswerForwarding&ForwardingNumber
Theincomingcallswillbeforwardtothespecifiednumberwhentheringtoneistime
outwithoutanswer.
Configurationonthephone:
1. PhoneSettings>CallSettings>CallForwarding>NoAnswerForwarding
2. SelectthedesiredaccountontheAccountbar.
3. ChecktoenableNoAnswerForwardingfeature.
4. InputtheforwardnumberintotheForwardingNumberbar.
4.7.4 Timeout
Setupthenoanswerforwardingtime.Whenthecallisbeyondthetime(thedefault
is30seconds)withoutanswer,itwillforwardtothetargetnumber.Therangevalue
is0to120second.
36 4.7.5 DoNotDisturb
DND function is to prevent foreign phone from disturbing, If open DND, external
phonecallisunabletocallin,turnedoffbydefault.
Configurationonthephone:
1. PhoneSettings>CallSettings>DonotDisturb
2. SelectthedesiredaccountontheAccountbar.
3. ChecktoenableDonotDisturbfeature.
4.7.6 CallWaiting
Ifenablecallwaitingfeature,afterestablishmentofaconversation,thereisathird
party call in, then video phone will have a new call tips, the incoming call will be
displayedontheconversationinterface,usercanchoosetoanswerorrejectthecall.
Ifdisablethecallwaitingfeature,thethirdpartywillpromptabusytone.Callwaiting
featureenablebydefault.
Configurationonthephone:
1. PhoneSettings>CallSettings>CallWaiting
EnableCallWaitingfeature.
4.7.7 Playtone
The caller will hear the tone when waiting. Different SIP server supports different
playtone.
4.7.8 Intercom
Itisusedtoanswertheincomingcallautomaticallyafteruserssetuptheintercom
function.Indefaultsituation,thephonewillanswertheintercomcallautomatically,
thespeakersvoicecanbeheardbyintercomoriginator.Usercansetthephoneto
37 enablesilentmodewhenautoanswertheintercomcallandtheintercomoriginator
willnothearspeakersvoice.
4.7.9 Hotline
Enable the Hotline feature allows the phone to call out a defined number
automatically, without input any number by manual in dialup interface. Hotline
DelayTimeistosetthecalloutdelayvalue.Therangevalueis0to5second.
4.8 DialPlan
Rules:AllowusertoselectReplaceRulesorDialNowtodisplayoredit.
RulesModify:Allowusertomodifyselectedrulesinformation,forreplacerule,you
canmodifyrelatedaccounts,prefixnumberandreplacenumber.
AreaCode:AreacodesarealsoknownasNPAs(NumberingPlanAreas).Theyusually
indicatedifferentgeographicalareaswithinonecountry.Ifenterednumbersmatch
the predefined area code rule, the IP phone will automatically prefix outgoing
numberwithareacode.
Note:Thereisonlyoneareacoderulesupported.
38
4.9 AutoProvision
Phonecanbeconfiguredtoresynchronizeitsinternalconfigurationstatetomatcha
remote profile periodically and on power up by contacting a normal provisioning
server(NPS)oranaccesscontrolserver(ACS).
39 4.10 Personalize
4.10.1 LogLevel
The Log levelis divided intoseven levels: EMERG, ALERT, CRIT, ERR, WARNING,
NOTICE,
INFO, DEBUG,logclass
is fromlow to high.The default setting
is
EMERG,whichisthelowestgradelog.
4.10.2 HookMode
HookModeisdividedintoPhoneMode,Disable,AppMode,AutoMode.Thedefault
modeisPhoneMode.
4.11 RebootManager
4.11.1 Reboottime
Usercansetuptherebootdateandhouryouwant.
40 4.11.2 Statusoftime
Ifthestatusisenable,userscaneditthereboottimeyouwant.
4.11.3 Statusofactive
Enable/disabletherebootfunction
4.11.4 Rebootsettings
Setthereboottime.Disablethisfeaturebydefault.
4.12 Date&Time
YoucanselectoneofthefollowingmethodstoenterDate&Timeconfiguration:
z Mode1:Inthemainscreen,tap
>Settings
>System>Date&time.
z Mode 2: Drag down the status bar, click icon on the status bar >tap
icon
>System>Date&time
Theconfigurationpageisshownasbelow.
41 Ifuserwanttomanuallysetthedateandtime,firstly,tapAutomaticdata&timebar
todisablestatus,andthensetthedate,time,selectatimezone.
TapSetdatebartopopupdatesetinterface.Asshownbelow.
TapSettime.Timesettingsasshownbelow.
42
Tap the Use 24hour format bar to change the hour format displayed, 1:00 PM
formatbydefault.
Tap the Choose date format bar to pop up the date format selection interface.
Month/day/yeardateformatbydefault.Shownasbelow.
43 4.13 PersonalizationSettings
Accordingtopersonalizedsettings,usercansettheequipmentmorecharacteristic.
4.13.1 Wallpaper
Usercanusethefollowingwaystosetthefavoritewallpaper.
Mode 1: In the main screen, Press Menu button
on the keyboard> tap
WALLPAPERSicon.
Mode 2: In the main screen, touch and hold on the blank part of desktop> tap
WALLPAPERSicon.
On the bottom of the screen displayed the default wallpapers, tap Pick image can
enter the gallery to select the picture. Click the Set wallpaper to save the change.
Configurationinterfaceshownasbelow.
4.13.2 Widgets
Widgetscanbeconvenientforuseruse,usercanselectfromtheavailableoptions.
44 4.13.2.1 AddAWidget
Usercanusethefollowingwaystoaddthewidgets.
Mode1:Inthemainscreen,PressMenubutton
onthekeyboard>tapthe
WIDGETSicon.
Mode 2: In the main screen, touch and hold on the blank part of desktop> tap
WIDGETSicon.
Each widget hasindicated thename andthe location,touch and hold to pick up
awidget,moveittothedesignatedlocationonthedesktop,thenmovefingersaway
fromthescreen.Slideright/lefttochangetheextendedscreen.Shownasbelow.
4.13.2.2 ModifyAnAddedWidget
Ifuserwanttomodifythelocationofaddedwidgetsonthedesktop,touchandhold
thewidgetuntiltheicon
appearsontheupperleftcornerofthescreen,drag
thewidgettothecorrespondingpositionofthedesktop.
Ifuserwanttochangethespacesizeofaddedwidgetsonthedesktop,touchand
holdthewidgetuntiltheicon
appearsontheupperleftcornerofthescreen,
thenmovefingersawayfromthescreen,thewidgetwillappearframeborder.User
45 cancontrolthewhitepointtodragthebordertochangethesizeofthewidgetframe.
And then only need to press Back button on the keyboard to save the change. As
shownbelow:
4.13.2.3 DeleteAWidget
Touchandholdthewidgetuntiltheicon
appearsontheupperleftcornerof
the screen, drag the widget to
location until the widget turn red, then move
fingersawaytodeletethewidget.
4.13.3 Shortcuts
UsercanaddtheshortcutssuchasApplication,Webpagebookmarksandtheother
applicationstothemainscreendesktop.
4.13.3.1 AddAShortcut
In the main screen,clickicon
,touch and holda shortcut, put it to the
designatedlocationonthedesktop,thenmovefingersawaythemainscreen.
46 4.13.3.2 ModifyAShortcut
Ifuserwanttomodifythelocationofshortcutonthedesktop,holdtheshortcutuntil
the icon
appears on the upper left corner of the screen, you can drag the
shortcuttothecorrespondingpositionofthedesktop.
4.13.3.3 DeleteAShortcut
Touchandholdtheshortcutuntiltheicon
appearsontheupperleftcornerof
thescreen,dragtheshortcutto
locationuntiltheshortcutturnred,thenmove
fingersawaytodeletetheshortcut.
4.13.4 ModifyExtendedBar
usercanmodifythequickstartprogramontheextendedbaratthebottomofthe
screen.Thedefaultextendedbarasshownbelow:
Inthemainscreen,holdtheshortcutuntiltheicon
appearsontheupperleft
cornerofthescreen,dragtheshortcutto
locationtodeletetheshortcut.Also
canreplacethedefaultshortcutwithanothershortcut.
4.13.5 Ringtone
Usercanselecttheringtoneprovidedbyphonedefault,candownloadmusicfrom
theInternet,andthensetthefavoritemusicasaringtone.
If user choose the ringtone provided by phone default, please refer to Sound &
47 notificationsettings.
IfuserchoosethemusicdownloadedfromtheInternetasaringtone,pleasefollow
thebelowsteps:
1) Click
>Musicicon
.
2) ViewthemusiclistinApp,touchandholdamusic,andthenInthepopupmenu
options,clickUseasphoneringtone.
4.14 Backup&Reset
1) ClickSetting
2) Personal>TapBackup&reset.
.
3) Personaldata>clickFactorydatareset.
4) CheckEraseSDcard>clickRESETDEVICElabel>tapERASEEVERYTHINGlabel.
48 5 Function
5.1 CallFunction
R48G phone supports audio calls and video calls. User can use the SIP account to
make a call, also can use IP direct make a call. SIP account configuration refers to
chapter4.3
5.1.1 MakeACall
User can directly dial from the keypad, select from the contact list or from call
recordstocalloutthenumber.
Usercanchooseoneofthefollowingstepstoenterintothedialinginterface.
Mode1:Directlypickupthehandset.
Mode2:PressSpeakerbuttononthekeypad.
Mode3:Inthemainscreen,Clickicon
.
Mode4:Inthemainscreen,selecticon
>tapicon
.
5.1.1.1 DialOutDirectly
1) By pressing the number keys on the dial interface or directly pressing the
numberonkeypad.Todeleteanumber,presstheicon
onthedialinterface,
orpressDeletebuttononthekeypad.
2) Ifyouwanttomakeanaudiocall,clickAudioCalllabel.Ifuserswanttomakea
videocall,clickVideoCalllabel.
Dialinginterfaceisshownasbelow:
49
3) IfregisteredmultipleavailableSIPaccounts,whenfinishingdialing,usercanclick
line
shownbelow.
label to choose the outgoing account for the number, as
5.1.2 DialingOutFromContactList
1) Tapicon
>Clicktheicon
>LabelPhoneBook>AllContacts.
2) Click
labeltomakeanaudiocall,click
labeltomakeavideocall,or
50 click
labeltosendthemessage.
Contactisshownasbelow
5.1.2.1 ContactsFuzzyMatchingQuery
Phonesupportscontactsfuzzymatchingqueried,intuitive,concisedialinginterface
for the intelligent input, greatly reducing the number of buttons, achieve rapid,
effectivepositioningsearch,avoidduplicationofinvalidoperation,savingtime.
Tapsearchicon toenterthesearchinterface.Enterthekeysymbolornumber
tosearchthecontact.Theresultwillbedisplayedontheleftlist.Shownasbelow.
51 5.1.3 ReceiveACall
Incoming calls include audio and video calls. If the caller has been stored in the
contacts, it will show the contact name, otherwise the caller number will be
displayed.
5.1.3.1 AnswerACall
1) Answeranaudiocall
When receiving an audio call, click Audio label or pick up the handset or press
speakerbuttononthekeypadtoanswer.Asshownbelow
2) Answeravideocall
Whenreceivinganvideocall,clickAudiolabeltoestablishtheaudiocall,clickVideo
labeltoestablishthevideocall.Asshownbelow
52 5.1.3.2 RejectACall
Ifuserwanttorejectacall,click
labelincallinginterface.
Ifuserwanttorejectacallfromanumber,youcanaddthenumbertotheblacklist.
5.1.4 CallOptions
During the audio conversation, the default call options shown as below.
53 Calloptionsaredescribedasbelow.
Clickthebuttontoholdthecurrentcall.
Clickthebuttontoresumethecurrentcall.
Clickthebuttontoentertheestablishtransferinterface
Clickthebuttontomute
Clickthebuttontoresumemute
Clickthebuttontosendavideorequest/closethevideo
Handsetmode
Speakermode
Headsetmode
Clickthebuttontoopentheextendedicons
Clickthebuttontoclosetheextendedicons
Clickthebuttontoentertheestablishconferenceinterface
Clickthebuttontostartrecord
Clickthebuttontostoprecord
Duringtheaudioconversation,thedefaultcalloptionsshownasbelow.
54
Videooptionsaredescribedasbelow.
Supportlocalandremotevideodisplayed
Supportremotevideodisplayed
Clicktoopenfullscreen/exitfullscreen
5.1.4.1 MultipleCalls
z The Phone supports more than 3 line calls. The line information is on the
rightsideofcallinterface.
z Duringacall,usercanclickontheicon
to addanewcall.
Andwhenclickonthisbutton,thecurrentcallwillbehold.
z Duringacall,usercanclickonanylineinthelisttoresumethecall.
55
5.1.5 CallRecords
5.1.5.1 ViewCallRecords
When got a missed call, the screen will display the missed call notification
in
above status bar. User can drag down to open the notification list, then click the
missedcallnotificationtoviewcallrecords.
Usercanalsodirectlythroughthedialinginterfacetoviewcallrecords:
1) Inthemainscreen,click
2) Clickicon
.
Shownasbelow.
56
3) Usercanclickthedropdownlist
tochoosethecallrecordtypes,it
supportsforAllCall,MissedCall,ReceivedCall,DialedCallandForwardedCall
fivetypesofcallinformation.
4) Call records are shown on the left. Click the number or contact, and user can
viewallthecallrecordsdetailsontheright.
5.1.5.2 CallFromCallRecords
InAllCall,MissedCall,ReceivedCall,DialedCallorForwardedCallinterface,usercan
Followingthebelowstepstoinitiateacall.
1) Clickacontactoranumberontheleftlist.
2) Ifyouwanttoinitiateanaudiocalldirectly,clicktheicon
incallrecords.
3) Ifyouwanttoinitiateanaudiocalldirectly,clicktheicon
incallrecords.
4) Ifyouwanttosendamessagedirectly,clicktheicon
incallrecords.
5.1.5.3 DeleteCallRecords
z Todeleteonecallrecord,stepsasbelow:
57 1) Longpressthecallrecordyouwanttodelete.
2) Popupamenu,pressConfirmlabeltoconfirmthedeletion.
z Todeletemultiplecallrecords,stepsasbelow:
1) Presstheicon
onthetoprightcornerofthescreen.
2) Checktherecordsontheleftlist.
3) Clickicon
.
z Todeleteallcallrecords,stepsasbelow.
1) Presstheicon
onthetoprightcornerofthescreen.
2) Tap
onthebottomleftofthescreen.
3) Clickicon
.
5.1.5.4 AddAContactFromCallRecords
Tosave a number from the call records,or merge the number into theexisting
contactnumberlist.Dothefollowingoperations.
1) Clickthenumberonthecallrecordslist.
2) Toaddanewcontact,clickicon
.
popup. Clickicon
,anewcontacteditpagewill
3) To mergethe number
into theexisting contact number
list, click
icon
, selecttheexistingcontactandthenclickConfirmlabelto
save.Willenterthecontacteditpage,clickicon
.
58
5.2 Contacts
Following method to enter into Contacts interface. Enter the dialing interface, and
thenclicktheicon
.
59 5.2.1 LocalPhoneBook
Usercanview,audiocall,videocall,add,edit,deletetheLocalcontacts.
5.2.1.1 AddANewContact
Click the icon
on the top right corner, and click New Contact label in the
dropdownwindow.Thenewcontactinterfaceisasshown:
Editthecontactphoto,BrowsetheimagefromTakePhotoorChoose
photofromGallery
Deletethenote
Canceltheedit
Savethemodify
Clickthelabelshowmoreinformationtoedit
Toaddsomemoreinformation,click
, popupthepageofcontactdetails,
click
tosave.Asbelowshown.
60
5.2.1.2 ModifyTheContact
1) Selectthecontactneedtomodifyinthecontactlist.
2) Clickicon
.
3) Enterintocontacteditpage,editthecontactinformation.
5.2.1.3 DeleteTheContact
Followingmethodstodeletethecontacts.
z Touch and hold the contact need to delete from contact list, and tap Confirm
labelinthepopupRemoveContactdialogbox.
z Select the contact, click icon clickConfirmlabeltodelete.
5.2.2 BroadsoftPhoneBook
, select Remove label, check the contact and
To setup Broadsoft contact. For Broadsoft PhoneBooks server address, port,
username and password, user need to consult the Broadsoft service provider for
61 furtherinformation.
5.2.3 RemotePhoneBook
Accesstheremotephonebook,addthecontactstothelocalphonebookfromthe
remotephonebookormakecallsfromtheremotephonebook.5URLsofremote
phonebookisavailabletoset.
z Settheremotephonebookviawebinterface.
1) AccessPhoneBook>RemotePhoneBook.
2) 3) InputURLofphonebook.
Inputthephonebookname.
4) ClicktheSubmitkeytosave.
z Entertheremotephonebookviaphoneinterface.
1) Accesscontactsettinginterface>clickRemotephonebook.
2) SelecttherelevantRemoteGroupandpresstheEntersoftkey.Thephonewill
loadtheremotegroupinformation,andtheLCDwilldisplaythecontactsofthis
remotegroup.
5.2.4 LDAP
TosetupLDAPcontact.ItoftenuseOpenLDAPservertogetthecontact.Forsetting
details,pleaseconsultwithyoursystemadministratorforfurtherinformation.
5.2.5 Group
Group, it will be convenient for you to have contact group management. Contacts
shouldatleastbelongtoagroup,thedefaultisnogroup.
62 5.2.5.1 AddANewGroup
1) Access contact setting interface> Local Phone Book> tap icon
on the
upperrightofthescreen.SelectNewGrouplabel.
2) Inputanewgroupnameinpopupdialogbox.
3) ClickConfirmlabeltosave.Thegroupwillbedisplayedontheleftlist.
5.2.5.2 RenameAGroup
1) Clickthegroupwanttorename>clickicon
toentereditpage.
2) Inputthenewnamedirectly.
3) ClickConfirmlabeltosave.
5.2.5.3 RemoveAGroup
1) Touchandholdthegroup>clickConfirmlabelinpopupdialogbox.
(Notethesystemdefaultgroupcannotbedeleted)
5.2.5.4 EditAGroup
1) Clickthegrouptoentereditpage.
2) ClickEditMember>checkthemember>tapConfirmlabeltodelete,ortouch
andholdtheexistedmember,itwillpopupaprompttodeletethemember.
5.3 BLF
Busy Lamp Field (BLF) is used to monitor a specific user for status changes on IP
phones. For example, user can configure a BLF key on a supervisors phone to
monitorthephoneuserstatus(busyoridle).Whenthemonitoreduserplacesacall,
abusyindicatoronthesupervisorsphoneindicatesthattheusersphoneisinuse.
Enterthedialinterface,clickBLFbutton.
63
NoteAfterfinishBLFKeyconfiguration,dragExtKeyfromtheWIDGETStothemain
interface.Asshownbelow.
64
5.4 Intercom
SelectTypeasIntercom,enterintercomcodeinValue.Choosetheavailedaccount.
ToclickConfirmtosave.
Note:DifferentSIPserverhasdifferentcodes.
65
1. PresstheIntercomkeywhenthephoneisavailable.Thephonewillconnectthe
extensionnumberofremoteuserautomatically.
2. The phone enable silent mode when picking up the intercom call so that the
otherwillnothearyou.
5.5 CallReturn
Thisfunctioncanbeusedtocallthelatestdialedcallrecordautomatically.
66
5.6 BLFList
BLFListWhileusingBroadSoftplatform,theaccountswhicharemonitoredbythe
sipphonewillreplythesubscribenewsintheformofxmllisttoimproveefficiency.
BLFListCodeWhileusingBroadSoftplatform,configuretheBLFLISTCODEcanPick
upcallorBargeincall.
Note: BLFListCode
is supported by Broadsoft platform, Please consult your
administratorfurtherinformation.
5.7 Pickup&GroupPickup
Usercanusepickuptoanswerotherusersincomingcall.ThephoneAkuvoxR48G
supportsspecifiedpickupandgrouppickup.
z Specifiedpickup
Specified pickup can answer specified users incoming calls. When the user of
specified pickup number is off or busy, user can press the pickup key to answer
incomingcallinsteadofthespecifiednumber.
67 z Grouppickup
Group pickup can answer groups user incoming calls. When anyone in group
receivesanincomingcall,usercanpressthegrouppickupkeytoanswer.
Note:Pressthegrouppickuponlytoanswerline1incomingcalliftherearemany
linesincomingcallsingroup.
5.8 ACD
AutomaticCallDistribution(ACD)enablesorganizationstomanagealargenumberof
phonecallsonanindividualbasis.ACDenablestheuseofIPphonesinacallcenter
role by automatically distributing incoming calls to available users, or agents. ACD
dependsonsupportfromaSIPserver.ACDisdisabledonthephonebydefault.User
needtoenableitonaperlinebasisbeforeloggingintotheACDsystem.
68
5.9 HotDesking
In some working place, the people are always walking around. HotDesking feature
will make the staffs login his account on any computer in the company. In some
publicplaces,theworkingpeopleisnotfixed,anyonecanuseHotDeskingforlogging
his account, and setting the phones to the familiar mode, such as the remote
functionofthecomputer.
69
5.10 Conference
User can use the conference feature to hold a 3way conference by pressing the
Conferencesoftkeytoinvitethecurrenttalkingandonelinetalkingheldtoattend
conference.
5.10.1Create3wayconference
1. Createtalkingwithfirstparty;
tocreateanewtalking;
2. Press
3. InputthenumberofsecondpartyandpresstheVideoCallorAuidoCalltomake
acall;
4. When the second party answers the call, press the Conference softkey or the
Conferencekeyonthekeypadtostart3wayconference.
70
71
5.11 Transfer
5.11.1BlindTransfer
WhentheIPphoneblindtransfersacall.
1. During the first way conversation, press transfer key on the keypad or click
entertheconfigurationinterface.
2. Enterthetransfernumber,thenclickBlindlabeltotransferthenumber.
Configurationinterfaceshownasbelow.
72
5.11.2AttendedTransfer
1. During the first way conversation, press transfer key on the keypad or click
entertheconfigurationintserface.
2. Enterthetransfernumber,thenclickAttendedlabeltotransferthenumber.
Configurationinterfaceshownasbelow.
73 3. Whenthethirdpartyanswered,press
tocomfirmthetransfer.Shown
asbelow.
5.12 KeypadInput
Onlynumbers,*and#canbeinputbykeypad.ThedefaultInputmethodisAndroid
keyboard.Usercanalsodownloadthepreferredinputmethodfromtheinternet.
5.13 WebpageBrowser
Thissectiondescribesthedefaultwebbrowserinthevideophone,andusercanalso
downloadthepreferredbrowserthroughtheinternet.
Usercanuseoneofthefollowingmethodstorunthebrowser:
z Mode1:Inthemainscreen,click
.
z Mode2:Inthemainscreen,click
>
.
74 5.13.1 OpenTheWebpage
5.13.1.1 BrowserAddressBar
Runthebrowser,entertheURLintheaddressbarordirectinputtheinformationto
search.Aftertheinput,usercanclickGoonthesoftkeyboardtocomplete.
5.13.1.2 BookmarkAndBrowsingHistory
Runthebrowser,click
toviewthebookmark&history&savedpages.
Icondescriptionshownasbelow.
Addanewwebpage
Viewthebookmarkandbrowsinghistory
Others
75 5.14 Camera
1. 2. Inthemainscreen,click
>
.
Sliderightonthescreen,viewthephotosandvideosinGallery.
5.14.1 PhotographMode
Turnonthecamera,andthedefaultmodeisphotographmode.
5.14.1.1 BasicSetting
Clickontherightuppercorner
popupthemenuontherightlist.
nonsupport
Clicktoenable/disable
thereferencegrid
Clicktosetthedelay
shuttertotakephotos
5.14.1.2 ModeSwitch
Sliderightonthescreentoswitchthemode.
Videomode
Photomode
Clickicon
interface.
ontherightuppercornertoentertherelatedparameterssetting
76
User can enter to set the resolution & quality to set the camera & video
parameter.
5.14.1.3 TakeAPhotograph
User canclick the button
on the right sideto take pictures. Ifuser want
toadjust
the
focal
length,
usetwo
fingers
topress
on
the
screen,shrinkageorexpansiontoadjustthefocallength.
77 5.14.1.4 TakeAVideo
Slide right on the screen to switch the mode. Click icon
to switch to video
mode.
Click
ontherightside,videostartswhentheiconturnsto
.Andclick
tostopthevideorecordingandsave.Shownasbelow.
5.15 Gallery
User can use Gallery toview photosor videos, and user can also view the picture
orvideodownloadedfromtheInternet.usercaneditthephotoorpictureandsetit
aswallpaper.
Inthemainscreen,clickicon
>clickicon
.
5.15.1 ViewPhoto&Picture&Video
Enterthegallery,usercanviewallphotos,picturesinthedevice,asshownbelow.
78 Click the icon
on the upper left corner, can viewphotos and videosin
groupsinthedropdownlist.Clickonthefoldertoviewallthephotos.
While viewing photos,user can usetwo
fingersto press on
the screen,
shrinkageorexpansiontoshrinkorenlargetheimage.
5.16 Bluetooth
Bluetooth is a proprietary, open wireless technology standard for exchanging data
overshortdistancesfromfixedandmobiledevices,creatingpersonalareanetworks
withhighlevelsofsecurity.OnVPR48G,userscoulduseBluetoothtotransferfiles,
share contact information with other Bluetooth portable devices by installing
BluetoothApplication,oruseBluetoothheadsetformakingcalls.
ToconnecttoaBluetoothdevice,turnonVPR48GsBluetoothradiofirst.Thefirst
timewhenusinganewBluetoothdevicewiththeVPR48G,pairthedevicewith
VPR48Gsothatbothdevicesknowhowtoconnectsecurelytoeachother.Afterthat,
userscouldsimplyconnecttoapareddevice.TurnoffBluetoothifitsnotused.
Bluetooth related settings are under VPR48Gs Settings application Wireless &
networks.
79 5.16.1 TurningBluetoothOn/Off
z Pressonscreen
z ClickonWireless&Networks.
>clickicon
.
z ClickorunticktheoptionforBluetooth.
5.16.2 ChangingBluetoothDeviceName
TheVPR48GusesVPR48GasBluetoothdevicenamebydefault.Thedevicename
will be visible to other devices when connecting them. Follow the steps below to
changethename:
z Pressonscreen
z ClickonWireless&Networks.
>clickicon
.
z ClickonBluetooth.
z ClickonBluetoothsettingsicon
, popupadragdownboxselectRenamethis
devicetoenteranewname.Oncedone,clickRENAMElabeltosave.
5.16.3 ParingVPR48GWithABluetoothDevice
BeforeconnectingVPR48GwithotherBluetoothdevice,usersmustpairthemfirst.
Theywillstaypairedafterwardsunlesstheyareunpaired.
z Pressonscreen
z ClickonWireless&Networks.
>clickicon
.
z ClickonBluetooth.
z Open the Bluethooth. The VPR48G scans and displays the IDs of all available
Bluetoothdevicesinrange.Ifthe deviceuserwouldliketopairwith doesnot
show up in the list, ensure that the other device is turned on and set to be
discoverable.
80 z IftheVPR48Gstopsscanningbeforetheotherdeviceisready,turnofftheR48G
Bluethooth,thenturnonagain.
z The discovered device will show in the available devices list with device ID.
MakesuretheBluetoothdeviceisactiveinpairingmode.Thentaponthedevice
IDontheVPR48Gtopairthem.Confirmthepasskeyinthepromptedmessage
(ifany).OrifPINisrequired,pleaserefertothedevicesdocumentationorother
procedurestoobtainthePIN.
5.16.4 UnpairingABluetoothDevice
After successfully paired, the VPR48G will show in Paired devices bar with paired
devicename.
Once its connected, users can tap icon
,then click FORGET to unpair the
connecteddevice.
5.17 USB
ThevideophonesupportsUSBconnectionforkeyboardandUSBstoragedevices.To
use USB keyboard, simply plug it into the USB port on the right side of the video
phoneanditwillbereadytouse.
ToconnectandaccessUSBstoragedevice:
z InsertUSBstoragedeviceintoUSBportattherightsideofvideophone.
z Itwilltakeafewsecondsforthevideophonetopreparetheconnection.
z To access USB storage, click on the main screen
> click Explorer icon
>clickmntontherightuppurcorner>clickusb_storage,toaccessand
manageyourdata.Shownasbelow.
81
5.18 Calendar
Tostartthecalendar
z Inthemainscreenclickicon
Asshownbelow
>Calendar
.
82
Ifonedayhasactivity,colorwillappearonthecalendartoremind.
5.18.1 AddAnAccount
Whileusingthecalendaratthefirsttime,itwillremindyoutoaddanaccount.
ClickAddaccounttoaddanaccount,andthensynchronizealltheschedulesofthe
accounttothecalendar.
5.18.2 ViewCalendar
The calendarwill display weeklyby default, and you can slidethe calendar up and
down to view thedifferent weeks.In order toview the activitiesor create the new
activities,youcanalsomakethecalendardisplaydailyormonthly.Whileusingdaily
ormonthlydisplaying,youcanslidethecalendarleftandrighttoviewthedifferent
dayormonth.
Click the date on the upper left corner, it will display the dropdown list
, Calendar displaying mode can be selected as daily, weekly or
monthly.
5.18.3 NewActivities
WhileCalendarisdisplayingasdailyorweekly,youcanusethefollowingmethodsto
83 createathenewactivity:
z Clickonthedate,andthenclickonthetimeperiod;
z Clickon
;
1) Inputthedetailsoftheactivity,
2) ClickDonetofinish.
5.18.4 EditActivities
Youcanclickonscheduleneededtobemodifiedtoedittheschedule.
5.18.5 DeleteActivities
Whileviewingtheactivity,youcanclickDELETEontheupperrightcornertodelete
theactivity.
5.19Clock
EntertheClock:
z Inthemainscreen,click
Asshownbelow.
>Clockicon
.
84
Description:
5.19.1 Alarm
Usercanaddoneormultiplealarms:
1) Click
.
Alarm
Defaultrealtime
Countdowntimer
Stopwatch
TimezoneOthers
Otherssetting
85 2) Clickicon
.
3) To set the hour and minute, click the digit on the right side to set hour and
minute.
4) Thenusercanselectenableordisablerepeatthealarminsomedaysofaweek,
selecttheringtoneofthealarmandeditdisplaylabel.Ifnotmodify,willpresent
tomorrowasdefault.
86 5.19.1.1 Enable/DisableAlarm
Usercanclickicon
toenableordisablethealarm.
Note:Ifpoweroffthephone,thealarmwillalsobeoff.
5.19.1.2 ModifyAlarm
If user want to modify the status of the alarm, including time, repeat data, alarm
ringtone,candirectlyclickonthealarm.
5.19.1.3 DeleteAlarm
InAlarmpage,userclickthealarm,afterpopupthedialogbox,select
todelete
thealarm.
5.19.2 CountdownTimer
1) Click
. Clickthedigitontherightside.Showasbelow.
2) Click
todeletethedigits.
87
3) Clickicon
tostartthecountdowntimer.Click
tostopthetime.
Theotherbuttonsaredescribedasfollowed.
Clicktoaddoneminutetocountdowntimer
Clicktodeletethecurrentcountdowntimer
Clicktoaddanothercountdowntimer
Clicktoresetthecountdowntimer
5.19.3 Stopwatch
1) Clickicon
.
2) Clickicon
tostartthetime.Click
tostopthetime.
3) Innormal,clickicon
torememberthecorrespondingtime.
4) Whenthetimeisonhold,clickicon
toresetthetimer.
88 5.20 Gmail
EmailApplicationcanletyouusePOP3orIMAPservicetosendandreceiveemail.
StartEmail
z Inthemainscreen,click
5.20.1 AddANewGmailAccount
MakesuretheemailaccounthasenabledPOP3or IMAPservice,andyoucanadd
manyaccounts.
Pleasechooseoneofthefollowingmethodstostart:
z If you haventadded an emailaccount yet,while starting the email
application,youwillbeaskedtosetupyouraccount,asshownbelow
89
z If you have already set up an email account, In the main Email page, Press
Menu button, and then click Account, and last press Menu to Add
Account.
1. 2. Inputtheemailaccountandpassword,andthenclickNext;
If there is noaccount typein the equipment databaseyou want to set, the
devicewillrequireyoutoentermoredetailedinformation(thereceivingserver
settingsandoutgoingserversettings).
3. Inputtheaccountnameandyourname,clickOK.
5.21Music
Inthemainscreen,clickicon Themusicpageisshownasbelow.
>Musicicon
.
90
UsercanclickthelabelsofArtists,AlbumsorSongstoviewallsongs,vieworplaythe
songsfromtheplaylists.
Toviewthecurrentlyplayingsong,clicktheNowplayinglabeltoview.
5.22 Explorer
Usercanuseexplorertomanagethefilesinthedevice.
Inthemainscreen,clickicon
>Explorericon
. Asshownbelow.
91 Clickmnttoentertoshowasbelow.IfinserttheUSBdevice,willdislpayedinthis
layer.Shownasbelow.
Clicktomodifythesort:byname,time,size,type
Clicktocreatanewfolderorphotofolder
5.23 VideoPlayer
Usercanusevideoplayertoplaylocalvideos.
.
Torunthevideoplayer:Inthemainscreen,click
Afterentering,usercanclickonthelistofvideostowatch.Asshownbelow:
>Videoicon 92
ScreenBrightnessAdjustment
Clicktoadjustthevolume
ClicktoaddintotheBookmark.
Thepreviousvideo,andlongpresstomake
videofastbackward.
Hold/Play.
fast
The next video, and long press to make
forward.
video
Screensize
adjustment,four
type of video sizes:
originalsize,fullscreen,16:9,4:3
Screensize adjustment,four type of video
sizes:originalsize,fullscreen,16:9.
Others
93 5.23 Others
5.23.1 ApkInstall
User need open phone permission before
installing. Go
to
the path:
Settings>Security,enableUnknownsources.
Inthemainscreen,click
>Explorer.SelecttheApkyouwanttoinstall,follow
heprompttooperate.
94 6 SoftwareUpgrade
6.1 ImmediateUpdate
Chooseonewaybelowtoenterthesystemupgradeinterface:
z In the main screen, press Menu on board > System Settings > System >
AboutMultimediaTerminal>SystemUpgrade>SystemUpdateNow
z In the main screen, tap on settings icon
> System > About device
>SystemUpdate>SystemUpdateNow.
Updateinterfaceasshown.
Three ways to update immediately: Local Update, Select other upgrade package,
RemoteUpgrade,asshownbelow.
95
6.1.1 SelectOtherUpgradePackage
1) ViaUSBtoUpgrade
PutupgradepackageintoUSB,insertUSB,thenclickSelectotherupgradepackage,
find/mut/usb_storage,findtheupgradepackage,thenclickOKtoupgrade.
2) ViaInternalMemorytoUpgrade
UseUSBtocopytheupgradepackageintoInternalMemory,thenpressSelectother
upgradepackage,find/mnt/sdcardfindupgradedocument,thenclickOKto
upgrade.
6.1.2 LocalUpdate
1) ViaUSBtoUpgrade
Changethenameofupgradepackageintoupgrade.zip,thencopyitintoUSB,insert
USB,entertheupgradeinterface,userwillfindthepathofupgradepackage,because
videophonehassearcheditautomatically,clickLocalUpdatetostartupgrading. 2) ViabuiltinSDCardtoupgrade
First,changethenameofupgradepackageintoupgrade.zip,thencopyitintoUSB,
96 and then use USB to copy the upgrade package into Internal Memory, enter the
upgrade
interface,
you
will
find
the
path
of
upgrade
package:/mut/sdcard/upgrade.zip, because
video phone has
searched
it
automatically,pressLocalUpdatetostartupgrading.
6.1.3 RemoteUpdate
1) Enter the interface in figure 51, click Server Address, and input the server
addressthatcontainsupgradepackage.Asshownbelow:
2)ClickRemoteUpgrade,videophonewillcheckthenewversionautomatically.If
existanewversion,itwillprompt.PressOKtodownloadupgradedocument.
3)Afterfinishdownloading,itpromptsDownloadupdateimagesuccess!Youneed
to restart system for update! , press reboot now, and then system will upgrade
automatically.Asshownbelow:
97
6.2 AutoUpdatePeriod
AutoUpdatePeriodincludesfourmodes:None,OneDay,OneWeek,andOneMonth.
Theterminalwilldetectthenewversionautomaticallyintime,ifthereis,thestatus
barwillshowThereisanewversion,pleaseupdate!.Clickanddownloadtheimage
forupgrade.
Asshownbelow:
98 6.3 Upgradeontheweb
1) ClickUpgrade>Basic.
2) Clickthe
labeltoselecttheversiontoupgrade.
3) Click
tosave.
6.4 CheckUpdateAfterSystemPowerOn
ClickCheckUpdateAfterSystemPowerOn.Shownasbelow.
99
Every time user power on, the system will check the new version automatically. If
there is a new one, the status bar will notice: System has new version, please
updatenow!,clickanddownloadtheimageforupgrade.
100 7 SystemMaintenance
7.1 SystemStateInspection
Mode1:Inthemainscreen,click
>Statusinfo>Versioninfo
Mode2:Inthemainscreen,click
Itwilldisplayphonestatus,softwareversionandhardwareversioninthisitem.
>Aboutdevice
>
7.2 IPQuery
Mode1:Inthemainscreen,press,click
->Statusinfo>NetworkStatus
Mode2:Inthemainscreen,click
>
>More>Ethernet
Mode3:PressSpeakerbuttonorpickuptoenterthedialinginterface,click
onupperrightcorner>enterthesettinginterface,checkStatusInfo;
Mode4:Slidedownthetopleft
,clicktheaccount,enterthesettinginterface,
checkStatusInfo;
Mode1andMode2cancheckIPaddress,subnetmask,gateway,DNSserveretc.in
Ethernet.
94
Mode 3 and Mode 4 can check the corresponding network information in setting
interface.
7.3 SIPAccountRegistrationQuery
YoucanchooseoneofthefollowingmethodstoentertheSIPaccountregistration
query.Iftheaccountissuccessfullyregistered,theiconwillbelightupinnotification
areaofphone.
102 Mode1:PressSpeakerbuttonorpickuptoenterthedialinginterface,click
onupperrightcorner,checkAccountManager.
Mode2:Slidedownthetopleft
,clicktheaccount,enterthesetupinterface,
checkAccountManager.
7.4 Backup&Reset
Mode 1: In the main screen, press "Menu" key on the hard keyboard> System
Settings>Backup&reset
Mode2:Inthemainscreen,click
>
>Backup&reset
SelectEraseSDcard,clickRESETDEVICE,thenthephonewillrestoretofactory
settings.
7.5 FailureProcess
Failure1:PowerLEDisoff
103 z Pleasecheckwhethertheadapterfitsthisproductrequirement;
z Pleasecheckwhethertheoutletisworkingproperly.
Failure2:Novoicewhenpickupthehandset
z Pleasecheckwhethertheconnectionofhandsetisworkingproperly;
z Pleaseadjustthevolume+keyonkeyboardwhenoffhookthephone,Observe
the display of volume prompt. Please pay attention that the volume key in
onhookandoffhooksituationistoadjusttheringvolumeandmediavolume
(call volume) separately. These two adjustments are unrelated. Adjust the
volumewontchangecallvolumewhenonhookthephone.
Failure3:Phonecantdialproperly
z Please check whether there is
at the topright of screen. If not, please
checkwhetherthecableinLANportisloose;
z Please check the IP address of phone via configuration (go to 4.2, network
configuration);
z IfitsnowinLAN,pleasecheckwhethertheIPaddressofphoneisconflictwith
otherdevicesinthesameLAN.
z Ifthenetworkconnectionisproperly,pleasecheckwhethertheicon
of
successful registration is in the notification area. If there is no explanation of
configurationfailure,pleasecontactnetworkadministratortorecoverit.
Failure4:Noringingwhenincomingacall
z Pleasemakesurethehandsetiscompletelyhungonthebase
z Pleaseadjustthevolume+keyonkeyboardwhenonhookthephone,Observe
the display of volume prompt. Please pay attention that the volume key in
onhookandoffhooksituationistoadjusttheringvolumeandmediavolume
(call volume) separately. These two adjustments are unrelated. Adjust the
volumewontchangeringvolumewhenoffhookthephone.
104 8 WebInterface
8.1 Weblogin
1. Openthebrowseronthecomputer.
InputtheIPaddressintheaddressbar.
Entertheusernameandpassword(username:admin,password:admin),then
click
.
2. 3.
8.2 Status>Basic
ClickStatus>Basictocheckthephoneinformation.
105
Sections
ProductInformation
NetworkInformation
Description
To display the devices information such as Model name,
MACaddress(IPdevicesphysicaladdress),HardwareModel,
FirmwareversionandHardwarefirmware.
TodisplaythedevicesNetworkingstatus(LANPort),suchas
Port Type(which could be DHCP/Static), Link Status, IP
Address,SubnetMask,Gateway,PrimaryDNS
server,SecondaryDNSserver.
106 AccountInformation
To display devices Account information and Registration
status (account username, registered servers address,
Registerresult).
8.3Account>Basic
Sections
SIPAccount
Description
TodisplayandconfigurethespecificAccountsettings.
z Status:Todisplayregisterresult.
z Display Label: Which is displayed on the phones LCD
screen.
z DisplayName:Whichissenttotheothercallpartyfor
displaying.
z Register Name: Allocated by SIP server provider, used
forauthentication.
z UserName:AllocatedbyyourSIPserverprovide,used
forauthentication.
z Password:Usedforauthorization.
107 SIPServer1
TodisplayandconfigurePrimarySIPserversettings.
z ServerIP:SIPserveraddress,itcouldbeanURLorIP
address.
z Registration Period: The registration will expire after
IP phone will reregister
Registration period, the
automaticallywithinregistrationperiod.
TodisplayandconfigureSecondarySIPserversettings.
This is for redundancy, if registering to Primary SIP server
fails, the IP phone will go to Secondary SIP server for
registering.
Note:SecondarySIPserverisusedforredundancy,itcanbe
left blank if there is not redundancy SIP server in users
environment.
SIPServer2
Description
TodisplayandconfigureOutboundProxyserversettings.
An outbound proxy server is used to receive all initiating
request messages and route them to the designated SIP
server.
Note: If configured, all SIP request messages from the IP
phonewillbesenttotheoutboundproxyserverforcefully.
TodisplayandconfigureTransporttypeforSIPmessage
z UDP: UDP is an unreliable but very efficient transport
layerprotocol.
z TCP:Reliablebutlessefficienttransportlayerprotocol. Sections
OutboundProxyServer
TransportType
108 NAT
To display and configure NAT(Net Address Translator)
settings.
z STUN:ShortforSimpleTraversalofUDPoverNATS,
asolutiontosolveNATissues.
Note:Bydefault,NATisdisabled.
8.4 Account>Advanced
109
Sections
SIPAccount
AudioCodecs
VideoCodecs
Description
To display current Account settings or to select which
accounttodisplay.
Todisplayandconfigureavailable/unavailableAudiocodecs
list.
Codecmeanscoderdecoderwhichisusedtotransferanalog
signaltodigitalsignalorvoiceversa.
Familiar codecs are PCMU(G711U), PCMA(G711A), G722
(widbandthcodecs),G729andsoon.
Todisplayandconfigureavailable/unavailableVideocodecs
list.
Videocodecisusedtotransferanalogsignaltodigital.We
cansupport2videocodecH263,H264
z Codec Resolution: It can support QCIF, CIF, VGA, 4CIF,
720P.
z Codec Bitrate: The lowest bitrate is 128, the highest
bitrateis2048.
z Codecpayload:From90119.
110
Sections
Subscribe
DTMF
Description
Todisplayorconfiguresessiontimersettings.
z Active:Toenableordisablethisfeature,Ifenable,the
ongoing call will be disconnected automatically once
thesessionexpiredunlessitsbeenrefreshedbyUACor
UAS.
z SessionExpire:Configuresessionexpiretime.
z Session Refresher: To configure who should be
responseforrefreshingasession.
Note: UAC means User Agent Client, here stands for IP
phone. UAS means User Agent Server, here stands for SIP
server.
TodisplayandconfigureDTMFsettings.
z Type:SupportInband,Info,RFC2833ortheir
combination.
z HowToNotifyDTMF:OnlyavailablewhenDTMFType
isInfo/Info+Inband/Info+RFC2833.
z DTMFPayload:ToconfigurepayloadtypeforDTMF.
Note: By default, DTMF type is RFC2833 which is the
standard. Type Inband uses inband frequency to indicate
DTMF tone which is most used to be compatible to
traditionaltelephoneserver.TypeInfouseSIPInfomessage
toindicateDTMFmessage.
111 Sections
Call
Description
Todisplayandconfigurecallrelatedfeatures.
z Max Local SIP Port: To configure maximum local sip
portfordesignatedaccount.
z Min Local SIP Port: To configure minimum local sip
portfordesignatedaccount.
z Caller ID Header: To configure which Caller ID format
tofetchfordisplayingonPhoneUI.
z Auto Answer:
If enabled,
IP phone will be
autoanswered when there is an incoming call for
designatedaccount.
z Provisional Response ACK: 100% reliability for all
provisionalmessage,thismeansitwillsendACKevery
time the IP phone receive a provisional SIP message
fromSIPserver.
z User=phone:
If enabled,
IP phone will
send
user=phonewithinSIPmessage.
z Anonymous Call: If enabled, all outgoing call for the
designatedaccountwillbeanonymousnumber.
z Anonymous Call Rejection: If enabled, all incoming
anonymousoutcallforthedesignatedaccountwillbe
rejected.
z MissedCallLog:Todisplaythemisscalllog.
z Prevent SIP Hacking: Enable to prevent SIP from
hacking.
112 Sections
SessionTimer
BLFList
Broadsoft
Description
Todisplayorconfiguresessiontimersettings.
z Active:Toenableordisablethisfeature,Ifenable,the
ongoing call will be disconnected automatically once
thesessionexpiredunlessitsbeenrefreshedbyUAC
orUAS.
z SessionExpire:Configuresessionexpiretime.
z Session Refresher: To configure who should be
responseforrefreshingasession.
Note: UAC means User Agent Client, here stands for IP
phone. UAS means User Agent Server, here stands for SIP
server.
TodisplayorconfigureBLFListURIaddress.
z BLFListURI:BLFListisshortforBusyLampFieldList.
z BLFListPickUpCode:TosettheBLFpickupcode.
z BLFListBargeInCode:TosettheBLFbargeincode.
TodisplayorconfigureBroadsoftAOCfeature.
z AOC: A feature used to be accounting on Broadsoft
platform.
Note: Please
information.
consult
your
administrator
further
113 Sections
Net
Conference
UserAgent
RemoteUserAgent
Description
TodisplayNATrelatedsettings.
z UDP Keep Alive message: If enabled, IP phone will
sendUDPkeepalivemessageperiodicallytorouterto
keepNATportalive.
z UDPAliveMsgInterval:Keepalivemessageinterval.
z Rport:RemotePort,ifenabled,itwilladdRemotePort
intooutgoingSIPmessagefordesignatedaccount.
ToselectLocalornetworkconference.
z Type:Toselectdesiredconferencetype
z Conference URI: If network conference is selected, a
networkconferenceURIisneededtobeinput.
OnecancustomizeUserAgentfieldintheSIPmessage;If
user agent is set to specific value, user could see the
informationfromPCAP.Ifuseragentisnotsetbydefault,
user could see the company name, model number and
firmwareversionfromPCAP
This feature need to be used with Auto Anser Doorphone
Delay.Gotothepath:Phone>CallFeature.
z Separator:Setupaseparater,suchas,,*or#to
separatemanydoorphoneaccount.
z NumberList DoorPhone: Fill multiple doorphone number .
8.5 Network>Advanced
114
Sections
LocalRTP
VLAN
8.6 Phone>Time
Description
TodisplayandconfigureLocalRTPsettings.
z MaxRTPPort:Determinethemaximumportthat RTP
streamcanuse.
z Min RTP Port: Determine the minimum port that RTP
streamcanuse.
TodisplayandconfigureVLANsettings.
z LAN Port/PC Port: You can configure VLAN setting for
bothportsrespectively.
z Active: To enable or disable VLAN
feature
for
designatedport.
z VID:ToconfigureVLANidfordesignatedport.
z Priority:ToselectVLANpriorityfordesignatedport.
Note: Please consult your administrator for specific VLAN
settingsinyournetworkingenvironment.
Sections
Description
WebLanguage
Tochoosetheweblanguage.Englishbydefault.
8.7 Phone>Preference
115
Sections
KeyPressSound
Description
Toconfigurethesoundvolumeforkeypress.
z Volume: The valid volume range is from 0~15,by
defaultits8.
RingtoneVolume
Toconfigurethesoundvolumeforringtone.
z Volume: The valid volume range is from 0~15,by
defaultits8.
8.8 Phone>CallFeature
Sections
ModePhone
ForwardTransfer
Description
Toenableordisablefeaturekeysync.
z FeatureKeySync:Toenableordisablefeaturekeysync. z Mode:Selectthedesiredmode.
TodisplayandconfigureForwardsetting.
Note: There are three types of forward: Always Forward,
116 BusyForwardandNoanswerForward.
z AlwaysForward:Anyincomingcallwillbeforwardedin
anysituation.
z BusyForward:AnyincomingcallwillbeforwardedifIP
phoneisbusy.
z No answer Forward: Any
incoming call will be
forwardedifitsnoanswerafteraspecifictime.
Sections
DND
Description
z DND(Do Not Disturb) allows IP phones to ignore any
incomingcalls.
z DND Emergency: Enable this function, users can still
receivethecallfromDNDAuthorizednumberwhenin
emergencysituation.
z DND Authorized Number: R48G supports multiple
authorizednumbers.Pleaseusecommatoseparate.
z DND Priority: Enable this function. If you enable DND
and Forward function in the same time, the DND
priorityishigherthanForwardfunction.
z Account:SelectaaccountforDNDfunction
z DND:Enablethisfunction
z Return Code when DND: Determine what response
code should be sent back to server when there is an
117 incomingcallifDNDon.
z DND On Code: The Code used to turn on DND on
servers side, if configured, IP phone will send a SIP
messagetoservertoturnonDNDonserversideifyou
pressDNDwhenDNDisoff.
z DND Off Code: The Code used to turn off DND on
servers side, if configured, IP phone will send a SIP
messagetoservertoturnoffDNDonserversideifyou
pressDNDwhenDNDison.
ToenableordisableCallWaiting.
z CallWaiting Enable:Ifenabled,itallowsIPphonesto
receive a new incoming call when there is already an
activecall.
z Call Waiting Tone: If enabled, it allows IP phones to
playthecallwaitingtonetothewaitingcallee.
CallWaiting
118 Sections
AutoRedial
Intercom
Hotline
ACD
RemoteControl
Description
Auto redial allows IP phones to redial an unsuccessful call
fordesignatedtimeswithindesignatedinterval.
z AutoRedial:Toenableordisableautoredialfeature.
z Auto Redial Interval: Determine the interval between
twoconsecutiveattempts.
z Auto Redial Times: Determine how many times to
redial.
Intercom allow user to establish a call directly with the
callee.
z Active:ToenableordisableIntercomfeature.
z Intercom Mute: If enabled, once the call established,
thecalleewillbemuted.
HotLineallowsusertocalloutadefinednumber
automaticallyafterhearingthedailtonewithoutdialingany
number.
z Active:ToenableordisableHotLinefeature.
z Number:TosetadefinedHotLinenumber.
z Delay Time: To set the automatically call out interval
afterhearingthedailtone.
ACD(AutomaticCallDistribution)ismostusedincallcenter
market,itallowsIPphonetologinthesystemwithmultiple
statussothatthesystemcoulddistributeanincomingcalls
toavailableuseroragents.
z ACDActivatedAuto:Ifenabled,Agentstatuswillturnto
designated
available
time(decidedbyACDActivatedAutoTimer).
automatically within
a
z ACD Activated Auto Timer: To configure interval when
willAgentstatusbecomesavailableautomatically.
z ACDPwdRequired:ToenabletheACDpassword.
Remote Control allows specific host to interact with IP
phone by sending HTTP or HTTPS requests. The specific
action could be answering an incoming call, hangup an
ongoingcallandsoon.
z Allowed Access IP List: To configure the allowed host
address.
z Note:Fornow,IPphonecanonlysupportIPaddress,IP
addresslistandIPaddresspatternasallowedhosts
119
Sections
KeyAsSend
SIPConfig
UACSTA
Description
KeyAsSendallowsyoutodisablesendkeyorassignpound
keyassendkey.
SetuptheSIPprotocolpackageinterval.T2ismaximum.The
intervalshouldbelargertheT1,butlessthenT2.
Using CSTA for SIP phone user agents. It can control some
featuresofcalling.UACSTAisusedtosendECMA323(CSTA
XML) information during SIP calling. The default status is
disabled.
120 Whenthereisanincomingcallfromdoorphone,setupthe
delayautoanswertime,R48Gwillautoanswerthecallafter
thetimeout.
Note:ifyouenableAutoAnswerfunction,thisfeaturewill
benotavailable.
z Return Code When Refuse: Allows user to assign
specific code as return code to SIP server when an
incomingcallisrejected.
z AutoAnswerDelay:Toconfiguredelaytime before an
incomingcallisautomaticallyanswered.
DoorPhone
Others
8.9 Phone>Audio
Sections
EchoCanceller
Description
EchoCanceller:Toremoveacousticechofromavoice
communicationinordertoimprovethevoicequality.
z VAD(VoiceActivityDetection):AllowIPphonetodetect
thepresenceorabsenceofhumanspeechduringacall.
Whendetectingperiodofsilence,VADreplacesthat
121 silence efficiently with special packets that indicate
silenceisoccurring.Itcanfacilitatespeechprocessing,
and deactivate some processes during nonspeech
section of an audio session. It can avoid unnecessary
coding or transmission of silence packets in VoIP
applications, saving on computation and network
bandwidth.
z CNG(Comfort Noise Generation): Allow IP phone to
generate comfortable background noise for voice
communications during periods of silence
in a
conversation.Itisapartofthesilencesuppressionor
VADhandlingforVoIPtechnology.CNG,inconjunction
withVADalgorithms,quicklyrespondswhenperiodsof
silence occur and inserts artificial noise until voice
activity resumes. The insertion of artificial noise gives
theillusionofaconstanttransmissionstream,sothat
backgroundsoundisconsistentthroughoutthecalland
thelistenerdoesnotthinkthelinehasreleased.
ToconfigureMicrophonevolumeforhandsetmode.
R48Gwillautoadjustamplificationcircuitgainviasignal.
z Automatic Gain Control(Sendingside): Disabled by
default
z Automatic Gain Control(Receivingside): Disabled by
default
z AutomaticGainControlTarget:Rangefrom1to20dB.
3dBbydefault.
Filter forgetting factor base: Range from 0~255. 250 by default. MicVolume
Automatical Generation
Control
NetEQ
122 8.10 Phone>Video
Sections
MediaFeedback
H264Settings
Description
z NACK:Enabledittofiltermosaic.
z Tmmbr: Send the maximum temporary rate request.
Disabledbydefault.
H264:Avideostreamcompressionstandard.Differentfrom
H263, it provides an approximately identical level of video
streamqualitybutahalfbitrate.Thistypeofcompressionis
sometimescalledMPEG4part10.
TosetupcorrespondingH264videoparameters.
z H264Profile:Thereare4modesBaseMainHigh Extendprofile.Differentprofilesmakesdifferentcoding
functionandvideoquality.
z H264 Level: Different profiles has corresponding Level
value.
z IDR
Interval:IDR means
Instantaneous Decoding
Refresh.Itisusedtocontroltheprocessofcodingand
decoding.
123 Others
z RateControl:ChooseoneH264videorate.
z Hardware Endec Acceleration: This function is used to
solve the image issue. User can enable the Hardware
EndecAccelerationwhenyouneed.
z HardwareDecodecAcceleration:Disabledbydefault.
z Color Enhancement: To increase the phone display
color.Enabledbydefault.
z Image Quality: User can select Low, Middle or High
mode.
z Camera Priority: R48G can connect extra camera. If
R48G has 2 cameras , please setup the priority for
externalcameraorinternalone.
8.11 Phone>ExtKey
124
Description
R48G can support 4 pages Ext Key. 20 Ext Keys for each
page.
Allowsusertoassignspecificfeaturetothedesignatedkey
onexpansionmodule.
Forkeys,theavailablefeaturelist:
DND,Menu,MSG,Status,Book,Fwd,PickUp,GroupPickUp,
Intercom, Speed Dial, History, Favorites, Redial, Account,
ACD, BLF, BLFList,Call Return, Hot Desking, Record, XML
Browser,DTMF.
Sections
CurrentPage
Key
8.12 Phone>Tone
Sections
Tone
Description
Allows user to select a specialized tone sets (classified by
countries)ortocustomizeowntones.
Note:Availablecountrytonessetsare:
China,Spain,Luxembourg,Sweden,Taiwan,Belgium,Denmark, Finland,Germany,Netherlands,Norway,Portugal.
125
8.13 Phone>ReplaceRule
Rules
RulesModify
AreaCode
Sections
Description
Allow user to select Replace rule or Dialnow to display or
edit.
Allow user to modify selected rules information. Once you
dialprefixvalue,itwillcalloutReplacenumber.
z ClickAddtoaddnewreplacerules.
z Selectaccountforthereplacerule
z Inputasuitableprefixvalue.Enterthereplacenumber.
z ClickSubmittosave.
Allreplaceruleswillshowinthelist.Userscaneditordelete
theexitedreplacerules.
AreacodesarealsoknownasNPAs(NumberingPlanAreas).
Theyusuallyindicatedifferentgeographicalareaswithinone
country.Ifenterednumbersmatchthepredefinedarea
126 code rule, the IP phone will automatically prefix outgoing
numberwithareacode.
Note:Thereisonlyoneareacoderulesupported.
8.14 Phone>DialPlan
Rules
DialNowDelay
Sections
Description
Allowusertoselect ReplaceruleorDialnow todisplayor
edit.
Allowuserconfiguredialnowdelaytimefordialnow.
It means user can configure the IP phone to dial out the
phone number automatically after the designated delay
timeifitmatchanydialnowrule.
127 RulesModify
AreaCode
Allow user to modify selected rules
information, for
dialnow rule, user can modify related accounts, Dial now
Ruleitself.
z ClickAddtoaddnewdialnownumber.
z Selecttherelatedaccountfordialnow.
z EnterthenumberinDialNowRulearea.
z Clicksubmittosave.
Alldialnownumberswillshowinthelist.Userscaneditor
deletetheexiteddialnownumber.
AreacodesarealsoknownasNPAs(NumberingPlanAreas).
They usually indicate different geographical areas within
onecountry.Ifenterednumbersmatchthepredefinedarea
code rule, the IP phone will automatically prefix outgoing
numberwithareacode.
Note:Thereisonlyoneareacoderulesupported.
128 8.15 Phone>ActionURL
129
Sections
ActionURL
Description
TodisplayandconfigureActionURLsettings.
SetupCompleted:WhentheIPphonecompletesstartup.
z Registered:WhentheIPphonesuccessfullyregistersan
account.
z Unregistered: When the
IP phone
logs off the
registeredaccount.
z RegisterFailed:WhentheIPphonefailstoregisteran
account.
z OffHook:WhentheIPphoneisoffhook.
z OnHook:WhentheIPphoneisonhook.
z IncomingCall:WhentheIPphonereceivesanincoming
call.
z OutgoingCall:WhentheIPphoneplacesacall.
z Established:WhentheIPphoneestablishesacall.
z Terminated:WhentheIPphoneterminatesacall.
z OpenDND:WhentheIPphoneenablestheDNDmode. z Close DND: When the IP phone disables the DND
mode.
z OpenAlwaysForward:WhentheIPphoneenablesthe
alwaysforward.
z CloseAlwaysForward:WhentheIPphonedisablesthe
alwaysforward.
z Open Busy Forward: When the IP phone enables the
busyforward.
z Close Busy Forward: When the IP phone disables the
busyforward.
z OpenNoAnswerForward:WhentheIPphoneenables
thenoanswerforward.
z CloseNoAnswerForward:WhentheIPphonedisables
thenoanswerforward
z TransferCall:WhentheIPphonetransfersacall.
z BlindTransfer:WhentheIPphoneblindtransfersacall. z Attended Transfer: When the IP phone performs the
semiattended/attendedtransfer.
z Hold:WhentheIPphoneplacesacallonhold.
z UnHold:WhentheIPphoneretrievesaholdcall.
z Mute:WhentheIPphonemutesacall.
z UnMute:WhentheIPphoneunmutesacall.
z MissedCall:WhentheIPphonemissesacall.
z IP Changed: When the IP address of the IP phone
changes.
z FWD Incoming Call: When the IP phone forwards an
130 incomingcall.
z Reject Incoming Call: When the IP phone rejects an
incomingcall.
z Answer New Call: When the IP phone answers a new
call.
z Transfer Finished: When the IP phone completes to
transferacall.
z Transfer Failed: When the IP phone fails to transfer a
call.
z IdleToBusy:WhenthestateoftheIPphonechanges
fromidletobusy.
z Busy To Idle: When the state of phone changes from
busytoidle.
8.16 Phone>Multicast
131
Sections
MulticastSetting
PriorityList
8.17 PhoneBook>LocalBook
Description
To display and configure the Multicast
setting.
z Paging Barge: Setup
the priority
quantity.
z PagingpriorityActive:Enableodisable
themulticast.
Tosetupthemulticastparameters.
z ListeningAddress:EntertheIPaddress
youneedtolisten
z Label
Input the
label for each
listeningaddress
132
Sections
Contact
Search
Dial
Group
GroupSetting
Import/Export
Description
Todisplayandselectlocalcontacttype.
z AllContacts:Todisplayoreditalllocalcontacts.
z Favorites:Todisplayoreditfavoritescontacts.
z BlackList:Todisplayblacklistcontacts.
Tosearchdesignatedcontactsfromlocalphonebook.
TodialoutacallorhangupanongoingcallfromWebUI.
Note:Forthisfeature,youneedtohavetheremotecontrol
privilege to control IP phone via Web UI. Please refer to
section Remote Control in the Web UI>Phone>Call
Featurepage.
TodisplayoreditGroupcontacts.
To display or change Group name, related ringtone or
description.
Toimportorexportthecontactorblacklistfile.
133 8.18 PhoneBook>RemoteBook
Sections
RemoteBook
Description
TodisplayandconfigureRemoteBooksettings.
z Index: To select desired Remote Book item to display
andconfigure.
z Local Book URL: To configure remote book server
address
z Local Book Name: To configure display remote book
nameonPhoneUI
z SearchRemotePhonebookName:Toenableordisable
searchremotephonebookname
z SearchFlashInterval:Tosetinterval(Rangefrom120s
to2592000s)
Note: IP phone supports at most 5 remote books. Please
refer to your administrator for how to establish a remote
bookserverandhowtocreateremotebookxmlfile.
134 8.19 PhoneBook>CallLog
Description
Todisplaycallhistoryrecords.
Available call history types are All calls, Dialed calls,
Receivedcalls,Missedcalls,Forwardedcalls.
z HangUp: To click to hangup ongoing call on the IP
phone.
Note:ForHangUpfeature,youneedtohavetheremote
controlprivilegetocontrolIPphoneviaWebUI.Pleaserefer
to section Remote Control in the Web UI>Phone>Call
Featurepage.
Sections
CallHistory
135 8.20 PhoneBook>LDAP
Sections
LDAP
Description
TodisplayandconfigureLDAPphonebooksettings.
z NameFilter:ThesettingsusedtotellLDAPserverwhat
nameattributestosearch.
z Number Filter: The settings used to tell LDAP server
whatnumberattributestosearch.
z Server:ToconfigureLDAPserversaddress.
z Port:ToconfigureLDAPserversport.
z Base DN: To configure searching base DN on LDAP
server.
z UserName:ToconfigureusernameforaccessingLDAP
server.
z Password: To configure password for accessing LDAP
server.
z Name Attribute: To configure which name attributes
shouldbefeedbackfromLDAPserver.
z Number Attribute: To configure which number
attributesshouldbefeedbackfromLDAPserver.
z DisplayName:ToconfiguredisplaynameonPhoneUI
whenthereisanysearchingresultfromLDAPserver.
z Max Hits: To configure the maximum size of result
136 responsefromLDAPserver.
z Search Delay Time: To configure delay time before
initiateLDAPsearchingrequestafteryouinputavalue
fromPhoneUI.
Note: For setting details,please consult with your system
administratorforfurtherinformation.
8.21 PhoneBook>Broadsoft
Sections
BroadsoftPhoneBook
Description
TodisplayandconfigureBroadsoftPhoneBooksettings.
z PhoneBookItem:Toselectspecificitemtoconfigure.
z Display Name: The name displayed at IP phones LCD
screenwhenaccessedviaPhoneUI.
z ServerAddress:BroadsoftPhoneBookserversaddress.
z ServerPort:BroadsoftPhoneBookserversport.
z User Name: Username used to access Broadsoft
PhoneBookserver.
z Password: Password used
to access Broadsoft
PhoneBookserver.
Note: IP phone supports at most 5 Broadsoft PhoneBook
items. For Broadsoft PhoneBooks server address, port,
username and password, you need to consult your
Broadsoftserviceproviderforfurtherinformation.
137 8.22 Upgrade>Basic
Sections
Firmwareversion
HardwareVersion
Upgrade
ResettoFactorySetting
Reset Config to Factory
Setting
Reboot
Description
To display firmware version, firmware version starts with
MODELname.
TodisplayHardwareversion.
To select upgrading zip file from local or a remote server
automatically.
Note:Pleasemakesureitsrightfileformatforrightmodel.
TosetupR48Gtofactorysetting.
Tosetuptheconfigurationfiletofactorysetting.
Clickthesubmittorebootthedevice
8.23 Upgrade>Advanced
138 Sections
PNPOption
Description
TodisplayandconfigurePNPsettingforAutoProvisioning.
z PNP:PlugandPlay,oncePNPisenabled,thephonewill
to PNP server
send SIP subscription message
automatically
to get Auto Provisioning servers
address.Bydefault,thisSIPmessageissenttomulticast
address224.0.1.75(PNPserveraddressbystandard).
Sections
ManualAutoP
Description
Todisplayandconfiguremanualupdateserverssettings.
z URL:Autoprovisioningserveraddress.
z User name: Configure if server needs an username to
access,otherwiseleftblank.
z Password: Configure if server needs a password to
139 access,otherwiseleftblank.
z Common AES Key: Used for IP phone to decipher
commonAutoProvisioningconfigurationfile.
z AES Key (MAC): Used for IP phone to decipher
MACoriented auto provisioning configuration file(for
example, file name could be 0c1105888888.cfg if IP
phonesMACaddressis0c1105888888).
Note:AESisoneofmanyencryption,itshouldbeconfigure
only configure filed is ciphered with AES, otherwise left
blank.
TodisplayandconfigureAutoProvisioningmodesettings.
ThisAutoProvisioningmodeisactuallyselfexplanatory.
Forexample,modePoweron meansIPphonewillgoto
doProvisioningeverytimeitpowerson.
Enabletosettherebootatdesignedtime.
AutomaticAutoP
RebootSchedule
Sections
SystemLog
Description
Todisplaysysloglevelandexportsyslogfile.
z Sysloglevel:Fromlevel0~7.Thehigherlevelmeansthe
more specific syslog is saved to a temporary file. By
default,itslevel3.
z ExportLog:Clicktoexporttemporarysyslogfiletolocal
140 PCAP
Others
PC.
Tostart,stoppacketscapturingortoexportcapturedPacket
file.
z Start: To start capturing all the packets file sent or
receivedfromIPphone.
z Stop:Tostopcapturingpackets.
Note: IP phone will save captured packets file to a
temporary file, this file maximum size is 1M(mega bytes),
andwilltopcapturingoncereachingthismaximumsize.
Todisplayorconfigureothersfeaturesfromthispage.
z Config file: To export or import configure file for IP
phone.
8.24 Security>Basic
Description
Tomodifyuserspassword.
z User Name: Choose the character you are.(admin or
user)
z CurrentPassword:Thecurrentpasswordyouused.
z NewPassword:Inputnewpasswordyouintendtouse.
z ConfirmPassword:Repeatthenewpassword.
Note:Securityisconfigurableviawebonly.
Sections
WebPasswordModify
141 8.25 Security>Advanced
Sections
WebServerCertificate
WebServerCertificate
Upload
Description
TodisplayordeleteCertificatewhichisusedwhenIPphone
isconnectedfromanyincomingHTTPsrequest.
Note:Thedefaultcertificatecouldnotbedeleted.
To upload a certificate file which will be used as server
certificate.
142 Sections
ClientCertificate
ClientCertificateUpload
Description
To display or delete Certificates which is used when IP
phoneisconnectingtoanyHTTPsserver.
Touploadcertificatefiles,thisisusedasclientcertificate.
z Only Accept trusted Certificates: If this option
is
enabled,onlytrustedcertificateswillbeaccepted.
143
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2017-01-25 | 2412 ~ 2462 | DTS - Digital Transmission System | Original Equipment |
2 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | ||
3 | JBP - Part 15 Class B Computing Device Peripheral |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 2 3 | Effective |
2017-01-25
|
||||
1 2 3 | Applicant's complete, legal business name |
AKUVOX (XIAMEN) NETWORKS CO., LTD.
|
||||
1 2 3 | FCC Registration Number (FRN) |
0025226762
|
||||
1 2 3 | Physical Address |
10/F, No.56, Software Park II
|
||||
1 2 3 |
Xiamen, N/A
|
|||||
1 2 3 |
China
|
|||||
app s | TCB Information | |||||
1 2 3 | TCB Application Email Address |
b******@baclcorp.com
|
||||
1 2 3 | TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
||||
1 2 3 |
A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
|
|||||
app s | FCC ID | |||||
1 2 3 | Grantee Code |
2AHCR
|
||||
1 2 3 | Equipment Product Code |
VPR48G
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 2 3 | Name |
B******** Y********
|
||||
1 2 3 | Telephone Number |
086-0********
|
||||
1 2 3 | Fax Number |
086-0********
|
||||
1 2 3 |
y******@akuvox.com
|
|||||
app s | Technical Contact | |||||
n/a | ||||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 2 3 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 2 3 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 2 3 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 2 3 | Equipment Class | DTS - Digital Transmission System | ||||
1 2 3 | DSS - Part 15 Spread Spectrum Transmitter | |||||
1 2 3 | JBP - Part 15 Class B Computing Device Peripheral | |||||
1 2 3 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Video Phone | ||||
1 2 3 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 2 3 | Modular Equipment Type | Does not apply | ||||
1 2 3 | Purpose / Application is for | Original Equipment | ||||
1 2 3 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | Yes | ||||
1 2 3 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 2 3 | Grant Comments | Output power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. | ||||
1 2 3 | Output power listed is conducted. | |||||
1 2 3 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 2 3 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 2 3 | Firm Name |
Bay Area Compliance Laboratories Corp.
|
||||
1 2 3 | Name |
J******** C******
|
||||
1 2 3 | Telephone Number |
86-28********
|
||||
1 2 3 | Fax Number |
86-28********
|
||||
1 2 3 |
j******@baclcorp.com
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15C | CC | 2402 | 2480 | 0.0048 | |||||||||||||||||||||||||||||||||||
1 | 2 | 15C | CC | 2412 | 2462 | 0.163 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
2 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0045000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
3 | 1 | 15B | CC |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC