Anker Technology Co., Limited. All rights reserved. ROAV and the ROAV logo are trademarks of Anker Technology Co., Limited, registered in the United States and other countries. All other trademarks are the property of their respective owners. Model: R2241-US 51005000745 V01 Owners Manual DASHCAM C2 Table of Content Safety Instructions At a Glance Inserting Memory Card Installing Your DashCam Connecting to Power Downloading Roav App 01 02 03 04 06 07 Using Your DashCam 08 System Setup Specifications FAQ Notice 10 12 13 14 Safety Instructions Please read and understand all instructions before using this product. If damage is caused by failure to follow the instructions, the warranty does not apply. Keep these instructions. Do not drop, puncture or disassemble this product. This product should not be exposed to dripping or splashing liquids. Avoid long exposure to direct sunlight, which may cause damage to this product. Exposing this product to open flames may cause explosion. Use original accessories only. Do not install where it will block the drivers view of the road or the Keep your attention on the road. Do not operate the controls of this deployment of the airbag. product while driving. Ensure the camera lens is kept clean and there is nothing blocking Setup time and date accurately before using this product. Do not use the charger if the cord is damaged or broken. Do not directly touch the product when it is getting overheated after long exposure to sunlight or continuous work. Remove this product from your vehicle when not in use for a long the lens. period. Keep out of reach of children. Use a clean, soft cloth to clean. Do not use any corrosive cleaner or The Company is NOT responsible for the loss of any data/content oil to clean. during operation. 01 DashCam Suction mount Car charger Charging cable Crowbar Owners Manual DASHCAM C1 Manual At a Glance Inserting Memory Card Do not remove or insert microSD / TF card when this product is powered on, which may damage the card. For reliable operation, use a Class 10 microSD / TF card. For a 64GB
/ 128GB card, format it before using. It is recommended to format the card regularly. Card Capacity 32 GB 64 GB 128 GB 1080P 30FPS 320 min 640 min 1280 min 720P 60FPS 360 min 720 min 1440 min 720P 30FPS 480 min 960 min 1920 min Insert a microSD / TF card with the gold contacts facing the screen side of the DashCam. Push the card until it clicks into place. To remove the card, gently push its top edge inward until it clicks, and then pull it out of the slot. 03 Camera lens Power button Reset slot Memory card slot Speaker Microphone LED indicator Flashing blue: recording in progress Steady red: no recording status Air vent Micro USB charging port Buttons LCD screen 02 Installing Your DashCam Never install this product while driving. Install this product near the rear-view mirror to obtain the best open-field view. Do not install in a location that will obstruct your required driving view. Make sure that the lens is within the wiping range of the windscreen wiper to ensure a clear view even when it rains. Do not touch the lens with your fingers. Finger grease may be left on the lens and will result in unclear videos. Attach the DashCam onto the mount.t Select a location on the windshield near the bottom right corner of the rear-view mirror, clean with clear water and wait until fully dry. Cover the suction mount onto the windshield and rotate the lock as indicated. Use the crowbar to press and hide the charging cable into the seams and weatherstrips around the edge of the dashboard. Adjust the lens viewing angle to ensure that it is aligned with the road ahead. 04 05 Connecting to Power Downloading Roav App Connect the car charger and DashCam by using the charging cable. Plug the other end of the car charger to your vehicles cigarette lighter socket. Search Roav in App Store or Google Play to Download. Once the car engine is started, DashCam will automatically power on and start recording. Once the car engine is shut down, DashCam will automatically save the recording and turns off. 06 Connect DashCam with Smartphone With successful connection with your smartphone via built-in Wi-
Fi, you can save and playback the driving recording videos on your smartphone. You can also change settings of your DashCam via the Roav app. When successfully connected, DashCam stops recording.
(Menu), select WIFI > On to enable WiFi on Press DashCam. Enable WiFi on your smartphone, find Roav DashCam A1 on the list and connect it, enter password (initial password:
goroavcam) if required. Follow the on-screen instructions in the Roav app to complete the connection.connection. 07 Using Your DashCam Playback Videos As a driver, you have full responsibility to drive safely and adhere to all applicable traffic regulations. Record Videos When connected to a car charger, DashCam automatically starts recording, is displayed and red dot flashes on the screen, the current recording duration is displayed, and the current date and time is displayed. To enable / disable the audio recording, press Unmute).
(Mute/
Protect the Current Recording By default, DashCam uses a sensor to automatically detect accidental collisions and protect the video file with duration of 30 seconds, and is displayed. This indicates that those recordings have been locked and will not be overwritten by new video clips. To protect the current recording manually, press
(Emer). The DashCam stops recording while viewing videos or settings.
(File) to to view all saved videos. Press Select a video to playback. Touch Button Virtual Button Function Play / Pause Delete Current / Delete All Lock Current / Unlock Current Back to previous menu 08 09 System Setup To adjust DashCams settings, tap
. Menu Options Description Set a desired video resolution. Resolution Loop Recording Set the duration of each recording video clip. Sensitivity for gravity helps to detect vibration and shock while driving and makes DashCam to respond appropriately. Available Options 720P 30FPS / 720P 60FPS / 1080P 30FPS 1 Min / 3 Min / 5 Min / 10 Min Low / Medium /
High / Off Enable to keep DashCam in standby mode. Motion will be detected for 15 times and DashCam starts recording a 30 second video each time. Low / Medium /
High / Off Connect with smartphone. On / Off Set date and time
/
Tap the value, tap next option, tap to save to adjust to Sensitivity Parking Collision Detection WIFI Date 10 Language Set on-screen display menu language. English / Deutsch /
/
//Espaol
/ Italiano / Franais LCD Auto Off Turn off the screen backlight after a period of inactivity. Machine Sound Mute or unmute. 30 Seconds / 60 Seconds / Off On / Off Default Format Water Mark Car battery protection Frequency About Reset all options to the default settings. Format the memory card and all the data will be deleted. Display / hide the date and time on the recordings. Detect and cut off voltage when the voltage drops below certain point. Match the video frequency of DashCam with the electrical frequency of your location. Check the current version number. Cancel / OK Cancel / OK On / Off On / Of 50 Hz (EU / China) /
60 Hz (US) 11 Button Function Click repeatedly to select a setting; Click to confirm a selection. Toggle the next setting Toggle the previous setting Back to recording mode Specifications Specifications are subject to change without notice. 1A Screen: 2.4 LCD color TFT Camera sensor: Sony IMX 323 Camera lens: wide-angle lens 145 Chipset: NT96658 Power input: 5V Max video resolution: 1080P 30FPS (1920x1080) Video clip format: .MOV Wi-Fi: 2.4GHz Band Operating temperature range: -20C to 70C / -4F to 158F Weight: Approx. 87 g / 3 oz Size: 83.4 * 56 * 35.4 mm / 3.3 * 2.2 * 1.4 in 12 FAQ Can not record?
Check if the memory card is inserted properly and there is enough free capacity. Check the battery level. Blurred image?
Use a clean, soft lens-cleaning cloth to gently clean the lens. Malfunction or crash?
Long press the Reset slot by using a sharp pin for at least 2 seconds. Blank screen?
The screen saver is activated. Change settings to Off if required. Fail to view and playback videos on your smartphone?
Check on your smartphone if Wi-Fi is successfully connected to the DashCam. How to enable parking monitor?
Press
> ON.
(Menu) , select Parking Collision Detection Worry about the memory card is full?
Continuous loop recording allows to overwrite the old unlocked files. Will my data be used when my smartphone is connected with DashCam?
No. Data will be used only if you share the saved videos via social apps. 13 Notice FCC Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: (1) Reorient or relocate the receiving antenna.
(2) Increase the separation between the equipment and receiver.
(3) Connect the equipment into an outlet on a circuit different from 14 that to which the receiver is connected. (4) Consult the dealer or an experienced radio / TV technician for help. This device is acting as slave and operating in the 2.4 GHz (2412-
2462 MHz). FCC Radio Frequency Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. operated with minimum distance 20cm between the radiator and your body Apple and the Apple logo are trademarks of Apple Inc., registered in the U.S. and other countries. App Store is a service mark of Apple Inc., registered in the U.S. and other countries. Google Play and the Google Play logo are trademarks of Google Inc. Android is a registered trademark of Google Inc. in the United States and other countries. iOS is a registered trademark of Apple Inc. in the United States and other countries. 15 12-month limited warranty Lifetime technical support support@goroav.com
+1 (800) 988 7973 (US) Mon-Fri 9:00 - 17:00 (PT)
@GoRoav
@GoRoav