Model: R2220 51005000800 V01 Owners Manual Roav DashCam C2 Pro Table of Content Safety Instructions At a Glance Inserting Memory Card Installing Your DashCam Connecting to Power Downloading Roav App Using Your DashCam System Setup Specifications FAQ Notice 01 01 02 03 05 06 07 09 11 12 13 Safety Instructions Please read and understand all instructions before using this product. If damage is caused by failure to follow the instructions, the warranty does not apply. Keep these instructions. Do not drop, puncture or disassemble this product. This product shall not be exposed to dripping or splashing. Avoid long exposure to direct sunlight, which may cause damage. Exposing this product to open flames may cause explosion. Use original accessories only. Do not install this product where it will block the drivers view of the road or the deployment of the airbag. Keep your attention on the road. Do not operate the controls of this product while driving. Ensure the camera lens is kept clean and there is nothing blocking the lens. Setup time and date accurately before using this product. Do not use the charger if the cord is damaged or broken. Remove this product from your vehicle when not in use for a long period. Keep out of reach of children. Use clean, soft cloth to clean. Do not use any corrosive cleaner/oil to clean. The Company is NOT responsible for the loss of any data/
content during operation. 01 DashCam GPS Suction mount Car charger Mount Charging cable Crowbar Owners Manual DASHCAM C1 Manual At a Glance Inserting Memory Card Do not remove or insert microSD / TF card when this product is powered on, which may damage the card. For reliable operation, use a Class 10, 32GB microSD / TF card. For a 64GB/128GB card, format it before using. It is recommended to format the card regularly. Camera lens Air vent Power button Memory card slot Speaker LED indicator Flashing blue: recording in progress Steady red: no recording status Micro USB charging port Buttons LCD screen 02 Card Capacity 1080P 30FPS 720P 60FPS 32 GB 64 GB 128 GB 360 min 720 min 1440 min 320 min 640 min 1280 min 720P 30FPS 480 min 960 min 1920 min Insert a microSD / TF card with the gold contacts facing the screen side of the DashCam. Push the card until it clicks into place. To remove the card, gently push its top edge inward until it clicks, and then pull it out of the slot. 03 Installing Your DashCam Never install this product while driving. Install this product near the rear-view mirror to obtain the best open-field view. Do not install in a location that will obstruct your required driving view. Make sure that the lens is within the wiping range of the windscreen wiper to ensure a clear view even when it rains. Do not touch the lens with your fingers. Finger grease may be left on the lens and will result in unclear videos. The mount is adhesive and may be destroyed if it is removed from the windshield. Select a location on the windshield near the bottom right corner of the rear-view mirror, clean with clear water and wait until fully dry. Remove 3M adhesive sticker and firmly affix the mount onto the windshield. Alternatively, cover the suction mount onto the windshield and rotate the lock as indicated. Use the crowbar to press and hide the charging cable into the seams and weatherstrips around the edge of the dashboard. Adjust the lens viewing angle to ensure that it is aligned with the road ahead, then rotate the fixing knob to fasten. Attach the DashCam onto the mount. 04 05 Connecting to Power Downloading Roav App Connect the car charger and DashCam by using the charging cable.
(*When using the GPS suction mount, plug the micro-USB cable attached to it into the DashCam first, then connect the car charger and the GPS suction mount by using the charging cable.) Plug the other end of the car charger to your vehicles cigarette lighter socket. Once the car engine is started, DashCam will automatically power on and start recording. Once the car engine is shut down, DashCam will automatically save the recording and turn off. T 06 Download the Roav app from the App Store or Google Play. Connect DashCam with Smartphone When successfully connected with your smartphone via built-in Wi-Fi, you can save and playback the driving recording videos on your smartphone. You can also change settings of the DashCam via Roav app. When successfully connected, DashCam stops recording.
(Menu) , select "WIFI" > "On" to enable WiFi on Press DashCam. Enable WiFi on your smartphone, find Roav DashCam C2 Pro on the list and connect it, enter password (initial password: goroavcam) if required. Follow the instructions on your smartphone to complete the connection. 07 Using Your DashCam Playback Videos As a driver, you have full responsibility to drive safely and adhere to all applicable traffic regulations. Record Videos When connected to a car charger, DashCam automatically starts recording and a red dot flashes on the screen. The current recording duration is displayed, and the current date and time is displayed. To enable / disable the audio recording, press
. Protect the Current Recording By default, DashCam uses a sensor to automatically detect accidental collisions and protect the video file with duration of 30 seconds, and is displayed. This indicates that those recordings have been locked and will not be overwritten by new video clips. To protect the current recording manually, press
. The DashCam stops recording while viewing videos or settings. to view all saved videos. Press Select a video to playback. Button Virtual Button Function Back to previous menu Lock Current / Unlock Current Delete Current / Delete All Play / Pause 08 09 System Setup To adjust DashCams settings, Press
. Menu Options Description Resolution Set a desired video resolution. Night Vision Enhancement Adjust the brightness to enhance night vision. Driving Collision Detection Parking Collision Detection Sensitivity for gravity helps to detect vibration and shock while driving and makes DashCam to respond appropriately. Enable to keep DashCam in standby mode. Motion will be detected for 15 times and DashCam starts recording a 30 second video each time. Available Options 720P 60FPS / 720P 30FPS / 1080P 30FPS Licence plate mode
/Panorama mode/
Balance mode Low / Medium /
High / Off Low / Medium/
High / Off Time Setup Set date and time Language Set on-screen display menu language. 10 Press the value, press next option, press to adjust to to save English / Deutsch /
/
//Espaol
/ Italiano / Franais LCD Auto Off Turn off the screen backlight after a period of inactivity. Loop Recording Set the duration of each recording video clip. 30 Seconds / 60 Seconds / Off 1 Minute / 3 Minutes
/ 5 Minutes / 10 Minutes Machine Sound GPS WiFi Format Water Mark Default Frequency About Button Sound / Voice prompts / Power On/Off Sound Enable / disable GPS positioning module to record the complete driving path. On / Off On / Off Connect with smartphone. On / Off Format the memory card and all the data will be deleted. Display / hide logo / date /
GPS speed. Cancel / OK On / Off Reset all options to the default settings. Cancel / OK Match the video frequency of DashCam with the electrical frequency of your location. Check the current version number. 50 Hz (EU / China) /
60 Hz (US) Button Virtual Button Function Back to recording mode 11 Toggle the previous setting Toggle the next setting Click to confirm a selection Specifications Specifications are subject to change without notice. Screen: 3 LCD color TFT (960 x 240) Camera sensor: Sony Exmor IMX 291 Camera lens: wide-angle lens 145 Chipset: Ambarella A12 Power input: 5V Max video resolution: 1080P 30FPS (1920x1080) Video clip format: .MP4 Battery capacity: 470mAh Operating temperature range: -20C to 70C / -4F to 158F Operating temperature range: 0C to 70C / 32F to 158F 1A
(Parking monitor) Weight: Approx. 110 g / 3.6 oz Size: 99*30*55 mm / 3.9*1.2*2.2 in 12 FAQ Can not record?
Check if the memory card is inserted properly and there is enough free capacity. Check the battery level. Blurred image?
Use a clean, soft lens-cleaning cloth to gently clean the lens. Malfunction or crash?
Press and hold the POWER button for at least 8 seconds. Blank screen?
The screen saver is activated. Change settings to Off if required. How to enable parking monitor?
Press Worry about the memory card is full?
Continuous loop recording allows to overwrite the old
, select Parking Monitor > ON. unlocked files. 13 This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired operation of the device."
Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes:
(1) l'appareil nedoit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement."
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. Notice FCC Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: (1) Reorient or relocate the receiving antenna. (2) Increase the separation between the equipment and receiver. (3) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. (4) Consult the dealer or an experienced radio / TV technician for help. 14 15 12-month limited warranty Lifetime technical support support@goroav.com
+1 (800) 988 7973 (US) Mon-Fri 9:00 - 17:00 (PT) Live Chat on Roav app and website
@GoRoav
@GoRoav