FCC ID: 2AOKB-T86P2 4G LTE Cam S330 with LTE and WiFi

QUICK START GUIDE 4G LTE Camera S330 Setting Up the System 1. Download and install the eufy Security app, then sign in or create an account. 2. Follow the in-app instructions to add this device and complete the setup. For online support, tutorial videos, FAQs, and more information, please visit https://support.eufy.com/s/

Scan the QR code to read the detailed user guide. Important Safety Instructions The suitable temperature for this device and accessories is -20C to 50C

(Charging temperature is 0C to 45C). It is recommended to supply the device in an environment with a temperature that ranges from 5C to 25C. Warning Replacing a battery with an incorrect type may bypass safeguards and create danger;

Disposal of a battery in a fire or other source of significant heat, or by crushing, or cutting, may result in an explosion as well as leakage of flammable liquids and gases;

Leaving a battery in an extremely hot environment may result in an explosion as well as leakage of flammable liquids and gases;

A battery subjected to extremely low air pressure may result in an explosion as well as leakage of flammable liquids and gases. CAUTION!

THERE IS A RISK OF EXPLOSION IF AN INCORRECT BATTERY TYPE IS USED. DISPOSE OF USED BATTERIES ACCORDING TO THEIR INSTRUCTIONS. FCC ID:2AOKB-T86P2 FCC Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: (1) Reorient or relocate the receiving antenna. (2) Increase the separation between the equipment and receiver. (3) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. (4) Consult the dealer or an experienced radio/

TV technician for help. FCC Radio Frequency Exposure Statement The device has been evaluated to meet general RF exposure requirements. The device can be used in fixed/mobile exposure condition. The min separation distance is 20cm. Notice: Shielded cables All connections to other computing devices must be made using shielded cables to maintain compliance with FCC regulations. The following importer is the responsible party Company Name: POWER MOBILE LIFE, LLC Address: 10900 NE 8th St, Ste 501, Bellevue WA 98004 Telephone: 1-800-988-7973 Declaration of Conformity This product complies with the radio interference requirements of the European Community. Hereby, Anker Innovations Limited declares that this device is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. For the declaration of conformity, visit the Web site: https://uk.eufylife.com/. RF exposure information: The Maximum Permissible Exposure (MPE) level has been calculated based on a distance of d=20 cm between the device and the human body. To maintain compliance with RF exposure requirements, use products that maintain a 20cm distance between the device and human body. Frequency bands and power are as below:

Function Wi-Fi LTE Bands 2.4GHz 1 3 7 8 20 28A 38 40 Operation Frequency 2412-2472MHz 1920-1980MHz 1710-1785MHz 2500-2570MHz 880-915MHz 832-862MHz 703-733MHz 2570-2620MHz 2300-2400MHz Max.Power EIRP 19.10 dBm 25.7dBm 25.7dBm 25.7dBm 25.7dBm 25.7dBm 25.7dBm 25.7dBm 25.7dBm Anker Innovations Deutschland GmbH I Georg-Muche-Strasse 3, 80807 Munich, Germany Your product is designed and manufactured with high quality materials and components, which can be recycled and reused. This symbol means the product must not be discarded as household waste, and should be delivered to an appropriate collection facility for recycling. Proper disposal and recycling helps protect natural resources, human health and the environment. For more information on disposal and recycling of this product, contact your local municipality, disposal service, or the shop where you bought this product.ww CUSTOMER SERVICE 12-month limited warranty

(US) +1 (800) 988-7973

(UK) +44 (0) 1604 936200

(DE) +49 (0) 69 9579 7960

( ) +86 400 0550 036

( ) +81 03 4455 7823 support@eufy.com

(AU) +61 3 8331 4800

(Egypt) +20 8000000826

(UAE) +971 8000320817

(Kuwait) +965 22069086

(Saudi Arabia) +966 8008500030 Anker Innovations Limited Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon, Hong Kong

@EufyOfficial

@EufyOfficial

@EufyOfficial Anker Innovations Limited. All rights reserved. eufy Security and eufy Security Logo are trademarks of Anker Innovations Limited, registered in the United States and other countries. All other trademarks are the property of their respective owners. PNT86P2 51005004243 V01

4G LTE Cam S330 Model:T86P2 Input: 5V=2.5A | Anker Innovations Limited | Made in China Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon, Hong Kong FCC ID : 2AOKB-T86P2 SN: XXXXXXXXXXXXXXXX P55 cex | | az

AnkerInnovationsLimitedDate:2023/10/13To:FederalCommunicationsCommission,Authorization&EvaluationDivision,7435OaklandMillsRoad,Columbia,MD21046ToWhomItMayConcern:TheAnkerInnovationsLimited,theundersigned,herebyauthorizesMrs.WendyZhanfromShenzhenMorlabCommunicationsTechnologyCo.,Ltd.,toactonthebehalfoftheAnkerInnovationsLimitedsolelyinmattersrelatingtotheapplicationforanFCCequipmentauthorizationforFCCID:2AOKB-T86P2includingthesigningofdocumentsinconnectionwiththisApplication.NecessaryactscarriedoutShenzhenMorlabCommunicationsTechnologyCo.,Ltd.onourbehalfoftheAnkerInnovationsLimitedinconnectionwiththeApplicationshallhavethesameeffectasactsoftheAnkerInnovationsLimited.AnkerInnovationsLimitedalsoherebycertifythatnopartytothisapplicationissubjecttoadenialofbenefits,includingFCCbenefits,pursuanttoSection5301oftheAnti-DrugAbuseActof1988,21U.S.C.862.Thankyouforyourattentiontothismatter.YoursSincerely,Signatory:Contactname:LouisQiTel:+86-755-86544807Email:Louis.qi@anker.comCompanyname:AnkerInnovationsLimited

AnkerInnovationsLimitedDate:2023/10/13To:FederalCommunicationsCommission,Authorization&EvaluationDivision,7435OaklandMillsRoad,Columbia,MD21046Re:RequestofConfidentialityforFCCID:2AOKB-T86P2ToWhomitmayconcern:Pursuant to sections 0.457 and 0.459 of Commissions Rules (CFR 47), and Section 552(b)(4) of the Freedom of Information Act, Anker Innovations Limited hereby requests confidentiality and treatment of certain information accompanying this application. The materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors.We are also hereby request Short-Term Confidentiality for 180 days from grant date as outlined in Public Notice DA04-1705. This provision will give Anker Innovations Limited temporary confidentiality of commercially sensitive information prior to product release.TherequestedPermanentandShort-TermConfidentialexhibitsarelistedasfollows:PERMANENTANDSHORT-TERMCONFIDENTIALLISTItemExhibitDescriptionPERMANENT1BlockDiagram2OperationalDescription3Schematics4BOMSHORT-TERM5ExternalPhotos6InternalPhotos7Test-SetupPhotos8UserManualTheApplicantunderstandsthatpursuanttoRule0.457,disclosureofthisapplicationandallaccompanyingdocumentations,whereapplicable,willnotbemadepublicbeforethedateoftheGrantforthisapplication.SignatoryContactname:LouisQiTel:+86-755-86544807Email:Louis.qi@anker.comCompanyname:AnkerInnovationsLimited

Anker Innovations Limited To: Federal Communications Commission Date: 2023/10/18 7435 Oakland Mills Road Columbia, MD 21046 USA Attestation Section 2.911(d)(5)(i) and Section 2.911(d)(5)(ii)

(KDB 986446 D01 Covered Equipment) Section 2.911(d)(5)(i) Anker Innovations Limited (the applicant) certifies that the equipment for which authorization is sought is not covered equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Section 2.911(d)(5)(ii) Anker Innovations Limited (the applicant) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing covered equipment. Type of Equipment subject to FCC Certification: 4G LTE Cam S330 FCC ID: 2AOKB -T86P2 If you have any questions, please feel free to contact me Contact Person:

Position in the Company: Compliance Manager Date of Signature:

2023/10/18 Louis Qi ___________________________ Signatory

(signature of the applicant)

Agent letter FCC attestation statement Anker Innovations Limited RF_753, Issue 1 Page 1 of 2 Anker Innovations Limited U.S. Agent Designation for Service of Process

(Applicant and U.S. Agent are Separate Parties) TO:

Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 ATTENTION: FCC Certification Section 2.911(d)(7) Information Designated U.S. Agent Company name:

FRN Contact person name:

Street address:

ZIP/City/State Telephone number:

Email address:

Signature:

Date:

Fantasia Trading LLC 0033423005 Louis Qi 5350 Ontario Mills Pkwy, STE 100, Ontario, CA 91764 91764/ Ontario/CA

+1 (800)988 7973 louis.qi@anker-in.com 2023/05/22 This letter is to confirm that we (the Designated U.S. Agent) have accepted the responsibility to act as the Designated U.S. Agent for Service of Process as required by section 47 CFR 2.911(d)(7) on behalf of the Applicant noted below. The Applicant acknowledges that they must maintain an agent for no less than one year after terminating all marketing and importation OR the conclusion of any Commission-

related proceeding involving the equipment. The applicant further acknowledges their responsibility to inform the FCC whenever the Designated U.S. Agent information above changes. Applicant Company name:

Grantee Code:

FCC ID:

Anker Innovations Limited 2AOKB 2AOKB-T86P2 Agent letter FCC attestation statement Anker Innovations Limited RF_753, Issue 1 Page 2 of 2 Contact person name:

Street address:

ZIP/City/State Telephone number:

Email address:

Signature:

Date:

Anker Innovations Limited Louis Qi Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok Kowloon

+86-755-86544807 Louis.qi@anker.com 2023/05/22